Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optomechanical detection of vibration modes of a single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Low-frequency vibration modes of biological particles, such as proteins, viruses and bacteria, involve coherent collective vibrations at frequencies in the terahertz and gigahertz domains. These vibration modes carry information on their structure and mechanical properties, which are good indicators of their biological state. In this work, we harnessed a particular regime in the physics of coupled mechanical resonators to directly measure these low-frequency mechanical resonances of a single bacterium. We deposit the bacterium on the surface of an ultrahigh frequency optomechanical disk resonator in ambient conditions. The vibration modes of the disk and bacterium hybridize when their associated frequencies are similar. We developed a general theoretical framework to describe this coupling, which allows us to retrieve the eigenfrequencies and mechanical loss of the bacterium low-frequency vibration modes (quality factor). Additionally, we analysed the effect of hydration on these vibrational modes. This work demonstrates that ultrahigh frequency optomechanical resonators can be used for vibrational spectrometry with the unique capability to obtain information on single biological entities., his work was supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 731868 – VIRUSCAN and European Research Council grants 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017, by the Spanish Science, Innovation and Universities Ministry through project CELLTANGLE reference RTI2018-099369-B-I00 and Ramón y Cajal grant RYC-2017-21640 to P.M.K. and by the Comunidad de Madrid (iLUNG B2017/BMD-3884) with support from the EU (FEDER, FSE). We acknowledge J. Mingorance for guidance and for providing the bacterial samples. All the authors acknowledge service from the IMN X-SEM Laboratory, which is funded by MCIU (project CSIC13-4E-1794) and the EU (FEDER, FSE). E.G.S. acknowledges financial support by the Fundación General CSIC (Programa ComFuturo), as well as Marie-Sklodowska Curie Actions (H2020-MSCA-IF-2015) under the NOMBIS project (703354).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optomechanical detection of vibration modes of single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la Conferencia Española de Nanofotónica (CEN2021), celebrada de forma virtual del 20 al 22 de septiembre de 2021, Vibration modes of biological particles such as proteins, viruses and bacteria involve coherent structural vibrations at frequencies in the THz and GHz domains. These vibration modes carry information on its structure and mechanical properties that play a pivotal role in many relevant biological processes. Despite the rapid advances of optical spectroscopy techniques, detection of vibration modes of single bioparticles has remained elusive. Here we harness a particular regime in the physics of mechanical resonator sensing that serves for detecting them. By depositing single bacterium on the surface of ultra-high frequency optomechanical disk resonators, we demonstrate that the vibration modes of the disk and bacterium hybridize when their associated frequencies are similar (Figure). A general theoretical framework is developed to describe the different regimes that can be found when an analyte adsorbs on a mechanical resonant sensor. The model recovers the classical inertial mass sensing regime as a limit case of a more general problem. Theory, numerical calculations and experiments show excellent agreement, allowing to retrieve the eigenfrequencies and mechanical loss of the bacterium vibration modes. Our method is applied for analysis of the effect of hydration on the vibrational properties of a single bacterium. This work opens the door for a new class of vibrational spectrometry based on the use of high frequency mechanical resonators with the unique capability to obtain information on single biological entities, This work was supported by the European Union’s Horizon 2020 under grants agreement no. 731868 – VIRUSCAN, 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017. E. Gil-Santos acknowledge financial support by the Spanish Science and Innovation Ministry through the projects PID2019-109765RA-I00 and RYC2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous Optical and Mechanical Sensing Based on Optomechanical Resonators

  • Sentre Arribas, Elena
  • Aparicio-Millán, Alicia
  • Lemaître, Aristide
  • Favero, Ivan
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
  • Gil-Santos, Eduardo
Optical and mechanical resonators have each been abundantly employed in sensing applications, albeit following separate development. Here we show that bringing together optical and mechanical resonances in a unique sensing device significantly improves the sensor performance. To that purpose, we employ nanoscale optomechanical disk resonators that simultaneously support high quality optical and mechanical modes localized in tiny volumes, which provide extraordinary sensitivities. We perform environmental sensing, but the conclusions of our work extend to other sensing applications. First, we determine optical and mechanical responsivities to temperature and relative humidity changes. Second, by characterizing mechanical and optical frequency stabilities, we determine the corresponding limits of detection. Mechanical modes appear more sensitive to relative humidity changes, while optical modes appear more sensitive to temperature ones, reaching, respectively, 0.05% and 0.6 mK of independent resolution. We then prove that simultaneous optical and mechanical monitoring enables disentangling both effects and demonstrates 0.1% and 1 mK resolution, even considering that both parameters may change at the same time. Finally, we highlight the importance of actively tracking the optical mode when optomechanical sensor devices. Not doing so enforces tedious independent calibration, influences the device sensitivity during the experiment, and shortens the sensing range. The present work hence clarifies the requirements for the optimal operation of optomechanical sensors, which will be of importance for chemical and biological sensing., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868-VIRUSCAN, by the “Fundación BBVA” under the program “Beca Leonardo a Investigadores y Creadores Culturales 2021” through the project DISOM, and by the “Fundación Ramón Areces” under the project OPTOCAP. E.G.-S. acknowledges the financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I. J.T. and M.C acknowledge the financial support by Spanish Science and Innovation Ministry through the projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE) and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR); and by “Comunidad Autónoma de Madrid” through the project Y2020/BIO- 65194 scCANCER-CM.I.F. I.F. acknowledges financial support from ERC NOMLI project (no 770933)., Peer reviewed