Pasar al contenido principal

Optomechanical resonators for biological applications

RYC2019-026626-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optomechanical detection of vibration modes of single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la Conferencia Española de Nanofotónica (CEN2021), celebrada de forma virtual del 20 al 22 de septiembre de 2021, Vibration modes of biological particles such as proteins, viruses and bacteria involve coherent structural vibrations at frequencies in the THz and GHz domains. These vibration modes carry information on its structure and mechanical properties that play a pivotal role in many relevant biological processes. Despite the rapid advances of optical spectroscopy techniques, detection of vibration modes of single bioparticles has remained elusive. Here we harness a particular regime in the physics of mechanical resonator sensing that serves for detecting them. By depositing single bacterium on the surface of ultra-high frequency optomechanical disk resonators, we demonstrate that the vibration modes of the disk and bacterium hybridize when their associated frequencies are similar (Figure). A general theoretical framework is developed to describe the different regimes that can be found when an analyte adsorbs on a mechanical resonant sensor. The model recovers the classical inertial mass sensing regime as a limit case of a more general problem. Theory, numerical calculations and experiments show excellent agreement, allowing to retrieve the eigenfrequencies and mechanical loss of the bacterium vibration modes. Our method is applied for analysis of the effect of hydration on the vibrational properties of a single bacterium. This work opens the door for a new class of vibrational spectrometry based on the use of high frequency mechanical resonators with the unique capability to obtain information on single biological entities, This work was supported by the European Union’s Horizon 2020 under grants agreement no. 731868 – VIRUSCAN, 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017. E. Gil-Santos acknowledge financial support by the Spanish Science and Innovation Ministry through the projects PID2019-109765RA-I00 and RYC2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous optical and mechanical sensing based on nano-optomechanical disks

  • Sentre Arribas, Elena
  • Gil-Santos, Eduardo
  • Favero, Iván
  • Lemaître, Aristide
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la 12th International Conference on Metamaterials, Photonic Crystals and Plasmonics - META, celebrada en Torremolinos (España), del 19 al 22 de julio de 2022, In this work, we demonstrate that by bringing together optical and mechanical resonances in single sensing platforms, their performances are significantly enhanced. In particular, we use nano-optomechanical disks, which simultaneously support high quality optical and mechanical modes. First, we apply the simultaneous or dual optical and mechanical sensing technique for monitoring environmental changes. Then, we employ it for detecting individual bacteria, accessing to its optical and mechanical properties. A variety of optical and mechanical resonators have been successfully employed in a diversity of sensing applications. Typically, optical resonators stand out for being extraordinary sensitive, while mechanical resonators are highly reliable. In this sense, optomechanical devices are unique platforms, since they support, at the same time, high quality optical and mechanical modes. Here we highlight the advantages of combining optical and mechanical resonances in a unique sensing platform, improving the sensor assets, together with its reliability and robustness. In particular, we apply nano-optomechanical disks fabricated out of gallium arsenide (Figure 1), which have already shown excellent capabilities when operating in liquids and for biosensing applications [1, 2]. We first apply them for monitoring environmental changes. Notably, the dual sensing approach allows decoupling relative humidity and temperature changes, reaching extraordinary precision, 0.01 % and 100 µK respectively (Figure 2). To further prove the capabilities of this novel method, we employ it for detecting individual bacteria (Figure 3). The technique allows to simultaneously access the bacterium optical and mechanical properties, such as its refractive index, absorption coefficient, mass, rigidity and viscosity [3]., Work produced with the support of a 2021 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. The Foundation takes no responsibility for the opinions, statements and contents of this project, which are entirely the responsibility of its authors. This research is also funded by the Spanish Ministry of Science under the project MicroBIOMS, reference PID2019-109765RA-I00. E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through the Ramón y Cajal grant RYC2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-throughput determination of dry mass of single bacterial cells by ultrathin membrane resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
How bacteria are able to maintain their size remains an open question. Techniques that can measure the biomass (dry mass) of single cells with high precision and high-throughput are demanded to elucidate this question. Here, we present a technological approach that combines the transport, guiding and focusing of individual bacteria from solution to the surface of an ultrathin silicon nitride membrane resonator in vacuum. The resonance frequencies of the membrane undergo abrupt variations at the instants where single cells land on the membrane surface. The resonator design displays a quasi-symmetric rectangular shape with an extraordinary capture area of 0.14 mm2, while maintaining a high mass resolution of 0.7 fg (1 fg = 10−15 g) to precisely resolve the dry mass of single cells. The small rectangularity of the membrane provides unprecedented frequency density of vibration modes that enables to retrieve the mass of individual cells with high accuracy by specially developed inverse problem theory. We apply this approach for profiling the dry mass distribution in Staphylococcus epidermidis and Escherichia coli cells. The technique allows the determination of the dry mass of single bacterial cells with an accuracy of about 1% at an unparalleled throughput of 20 cells/min. Finally, we revisit Koch & Schaechter model developed during 60 s to assess the intrinsic sources of stochasticity that originate cell size heterogeneity in steady-state populations. The results reveal the importance of mass resolution to correctly describe these mechanisms., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868—VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMN-CNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC13-4E-1794 with support from FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Mass Measurement Of Single Bacterial Cells By Silicon Nitride Membrane Resonators

  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Gil-Santos, Eduardo
  • Cano-Tortajada, Álvaro
  • Papanastasiou, Dimitris
  • Kounadis, Diamantis
  • Panagiotopoulos, Elias
  • Mingorance, Jesús
  • Rodríguez-Tejedor, María
  • San Paulo, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Trabajo presentado en la 36th International Conference on Micro Electro Mechanical Systems (MEMS), celebrada en Munich (Alemania), del 15 al 19 de enero de 2023., © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., We present a technological approach to precisely measure the dry mass of many individual cells of a bacteria colony. In this technique, bacteria are transported from aqueous solution into gas phase and subsequently guided to the surface of a silicon nitride membrane resonator. Abrupt downshifts in the membrane eigenfrequencies are measured upon every bacterium adhesion and are related to the dry mass of the cell by theoretical methods. We measure the dry mass of Escherichia coli K-12 and Staphylococcus epidermidis with an unprecedented throughput of 20 cells/min and with a mass resolution of ⁓1%. Finally, we apply the Koch & Schaechter model to assess the intrinsic sources of growth stochasticity., This work was supported by the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 731868-VIRUSCAN and by the ERC CoG Grant 681275 “LIQUIDMASS”. We acknowledge the service from the Micro and Nanofabrication Laboratory an X-SEM laboratory at IMNCNM funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2SPACE) and by MINECO (Project CSIC12-4E-1794 with support from FEDER, FSE). E. G. S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection Limits in Nanomechanical Mass Flow Sensing for Nanofluidics With Nanowire Open Channels

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Trabajo presentado en la 36th International Conference on Micro Electro Mechanical Systems (MEMS), celebrada en Munich (Alemania), del 15 al 19 de enero de 2023., © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Nanomechanical sensing is applied to measure the transport of liquid along the external surface of nanowire open fluidic channels. We integrate nanowire open channels with microcantilever resonators as sensors, enabling larger flow measurements; or use the nanowires simultaneously as open channels and resonators, for quantifying extremely small amounts of liquid. We study the detection limits of both systems and their implications for measuring the transport of ionic liquid from a microdroplet reservoir to Si nanowires when these are partially inserted into the microdroplet in the absence of any electrical signal. We obtain detection limits in the order of tens of femtogram and single attograms for each system, respectively, and a combined sensing range from 1 ag to beyond 10 pg, enabling the detection of transport of liquid volumes down to the zeptoliter scale., This work was supported by the ERC-CoG 681275 “LIQUIDMASS” and by the Spanish Science and Innovation Ministry through Projects “EXOFLUX” (PGC2018-101762-B-I00) and “MOMPs” (TEC2017- 89765- R). We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC- 2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems

  • Escobar, Javier Enrique
  • Molina Fernández, Juan
  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Kosaka, Priscila M.
  • Tamayo de Miguel, Francisco Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires., This work was supported by European Research Council through ERC CoG Grant 681275; project PID2021- 128395OB-I00 funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE; Projects PDC2022-133944-I00 and PLEC2021-007892 funded by MCIN/AEI/10.13039/ 501100011033 and European Union “NextGenerationEU”/ PRTR; Project Y2020/BIO-65194 funded by Comunidad de Madrid; Grant RYC-2019-026626-I funded by MCIN; Project AES (DTS21/00136) funded by ISCIII/Unión Europea/ FEDER. We acknowledge the service from the Micro and Nanofabrication Laboratory at IMN-CNM, funded by the Comunidad de Madrid (Project S2018/NMT-4291 TEC2- SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous Optical and Mechanical Sensing Based on Optomechanical Resonators

  • Sentre Arribas, Elena
  • Aparicio-Millán, Alicia
  • Lemaître, Aristide
  • Favero, Ivan
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
  • Gil-Santos, Eduardo
Optical and mechanical resonators have each been abundantly employed in sensing applications, albeit following separate development. Here we show that bringing together optical and mechanical resonances in a unique sensing device significantly improves the sensor performance. To that purpose, we employ nanoscale optomechanical disk resonators that simultaneously support high quality optical and mechanical modes localized in tiny volumes, which provide extraordinary sensitivities. We perform environmental sensing, but the conclusions of our work extend to other sensing applications. First, we determine optical and mechanical responsivities to temperature and relative humidity changes. Second, by characterizing mechanical and optical frequency stabilities, we determine the corresponding limits of detection. Mechanical modes appear more sensitive to relative humidity changes, while optical modes appear more sensitive to temperature ones, reaching, respectively, 0.05% and 0.6 mK of independent resolution. We then prove that simultaneous optical and mechanical monitoring enables disentangling both effects and demonstrates 0.1% and 1 mK resolution, even considering that both parameters may change at the same time. Finally, we highlight the importance of actively tracking the optical mode when optomechanical sensor devices. Not doing so enforces tedious independent calibration, influences the device sensitivity during the experiment, and shortens the sensing range. The present work hence clarifies the requirements for the optimal operation of optomechanical sensors, which will be of importance for chemical and biological sensing., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868-VIRUSCAN, by the “Fundación BBVA” under the program “Beca Leonardo a Investigadores y Creadores Culturales 2021” through the project DISOM, and by the “Fundación Ramón Areces” under the project OPTOCAP. E.G.-S. acknowledges the financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I. J.T. and M.C acknowledge the financial support by Spanish Science and Innovation Ministry through the projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE) and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR); and by “Comunidad Autónoma de Madrid” through the project Y2020/BIO- 65194 scCANCER-CM.I.F. I.F. acknowledges financial support from ERC NOMLI project (no 770933)., Peer reviewed