Pasar al contenido principal

ESPECTROSCOPIA MECANICA DE ENTIDADES MICROBIOLOGICAS BASADA EN SENSORES OPTOMECANICOS

PID2019-109765RA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro-Kelvin Resolution at Room Temperature Using Nanomechanical Thermometry

  • Ferreiro-Vila, Elías
  • Molina Fernández, Juan
  • Weituschat, Lukas Max
  • Gil-Santos, Eduardo
  • Postigo, Pablo Aitor
  • Ramos Vega, Daniel
Ultrahigh sensitivity temperature measurement is becoming increasingly relevant for different scientific and technological fields from fundamental physics to high-precision engineering applications. Here, we demonstrate the use of a nanomechanical resonator - free standing silicon nitride membranes with thicknesses in the nanoscale - for room temperature thermometry reaching an unprecedented resolution of 15 μK. These devices were characterized by using an interferometric system at high vacuum, where there are only two possible mechanisms for heat transfer: thermal conductivity and radiation. While the expected behavior should be to decrease the frequency of the mechanical resonance due to the thermoelastic effect, we observe that the nanomechanical response can be both positive and negative depending on the thermal flux: a heat point source always shifts the mechanical resonance to lower frequencies, while a distributed heat source shifts the resonance to higher frequencies., This research is funded by the Spanish Ministry of Science under project MOMPs reference TEC2017-89765-R and the European Association of National Metrology Institutes (JRP f14 PhotOQuanT17FUN05). E.G.-S acknowledges financial support by the Spanish Ministry of Science under the project MicroBIOMS, reference PID2019-109765RA-I00. This project has received funding from the EMPIR program co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program. The service from the Micro and Nanofabrication Laboratory (MiNa) and X-SEM Laboratory is funded by MCIU (CSIC13-4E-1794) and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optomechanical detection of vibration modes of single bacterium

  • Gil-Santos, Eduardo
  • Ruz Martínez, José Jaime
  • Malvar, Óscar
  • Favero, Iván
  • Lemaître, Aristide
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la Conferencia Española de Nanofotónica (CEN2021), celebrada de forma virtual del 20 al 22 de septiembre de 2021, Vibration modes of biological particles such as proteins, viruses and bacteria involve coherent structural vibrations at frequencies in the THz and GHz domains. These vibration modes carry information on its structure and mechanical properties that play a pivotal role in many relevant biological processes. Despite the rapid advances of optical spectroscopy techniques, detection of vibration modes of single bioparticles has remained elusive. Here we harness a particular regime in the physics of mechanical resonator sensing that serves for detecting them. By depositing single bacterium on the surface of ultra-high frequency optomechanical disk resonators, we demonstrate that the vibration modes of the disk and bacterium hybridize when their associated frequencies are similar (Figure). A general theoretical framework is developed to describe the different regimes that can be found when an analyte adsorbs on a mechanical resonant sensor. The model recovers the classical inertial mass sensing regime as a limit case of a more general problem. Theory, numerical calculations and experiments show excellent agreement, allowing to retrieve the eigenfrequencies and mechanical loss of the bacterium vibration modes. Our method is applied for analysis of the effect of hydration on the vibrational properties of a single bacterium. This work opens the door for a new class of vibrational spectrometry based on the use of high frequency mechanical resonators with the unique capability to obtain information on single biological entities, This work was supported by the European Union’s Horizon 2020 under grants agreement no. 731868 – VIRUSCAN, 681275 – LIQUIDMASS- ERC- CoG-2015 and 770933-NOMLI-ERC-CoG 2017. E. Gil-Santos acknowledge financial support by the Spanish Science and Innovation Ministry through the projects PID2019-109765RA-I00 and RYC2019-026626-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous optical and mechanical sensing based on nano-optomechanical disks

  • Sentre Arribas, Elena
  • Gil-Santos, Eduardo
  • Favero, Iván
  • Lemaître, Aristide
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
Resumen del trabajo presentado en la 12th International Conference on Metamaterials, Photonic Crystals and Plasmonics - META, celebrada en Torremolinos (España), del 19 al 22 de julio de 2022, In this work, we demonstrate that by bringing together optical and mechanical resonances in single sensing platforms, their performances are significantly enhanced. In particular, we use nano-optomechanical disks, which simultaneously support high quality optical and mechanical modes. First, we apply the simultaneous or dual optical and mechanical sensing technique for monitoring environmental changes. Then, we employ it for detecting individual bacteria, accessing to its optical and mechanical properties. A variety of optical and mechanical resonators have been successfully employed in a diversity of sensing applications. Typically, optical resonators stand out for being extraordinary sensitive, while mechanical resonators are highly reliable. In this sense, optomechanical devices are unique platforms, since they support, at the same time, high quality optical and mechanical modes. Here we highlight the advantages of combining optical and mechanical resonances in a unique sensing platform, improving the sensor assets, together with its reliability and robustness. In particular, we apply nano-optomechanical disks fabricated out of gallium arsenide (Figure 1), which have already shown excellent capabilities when operating in liquids and for biosensing applications [1, 2]. We first apply them for monitoring environmental changes. Notably, the dual sensing approach allows decoupling relative humidity and temperature changes, reaching extraordinary precision, 0.01 % and 100 µK respectively (Figure 2). To further prove the capabilities of this novel method, we employ it for detecting individual bacteria (Figure 3). The technique allows to simultaneously access the bacterium optical and mechanical properties, such as its refractive index, absorption coefficient, mass, rigidity and viscosity [3]., Work produced with the support of a 2021 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. The Foundation takes no responsibility for the opinions, statements and contents of this project, which are entirely the responsibility of its authors. This research is also funded by the Spanish Ministry of Science under the project MicroBIOMS, reference PID2019-109765RA-I00. E.G.S. acknowledges financial support by the Spanish Science and Innovation Ministry through the Ramón y Cajal grant RYC2019-026626-I.