Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Silver on the Structural and Wettability Properties of ZnO Films Grown by Oblique Angle Magnetron Sputtering

  • Álvarez-Fraga, Leo
  • Gago, Raúl
  • Araiza, José de Jesús
  • Azpeitia-Urkia, Jon
  • Jiménez, Ignacio
  • Sánchez Garrido, Olga
Un-doped (uZO) and silver-doped zinc oxide (SZO) films were prepared by oblique incidence sputtering deposition under different process parameters. The crystalline structure, chemical composition, and surface morphology were correlated with the optical properties, as well as with the wettability of the films. In the case of uZO films, the orientation, inclination, and morphology of the columnar structure determined the wettability of the layer, moving from a hydrophilic- to hydrophobic-like character. In the case of SZO films, although almost all of them displayed hydrophobic behavior, the hydrophobic character increased with the Ag content. The most hydrophobic surface was obtained when the Ag content in the layers was greater than 7 at.% and, in these cases, the structural results indicate that the layers were formed by a disordered mixture of Zn and Ag oxides., This research was funded by grant TED2021-129876B-I00 of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Morphology and Optical Properties of Hafnium Oxide Thin Films Produced by Magnetron Sputtering

  • Araiza, José de Jesús
  • Álvarez-Fraga, Leo
  • Gago, Raúl
  • Sánchez Garrido, Olga
Hafnium oxide films were deposited on sapphire and silicon (100) substrates using the DC reactive magnetron sputtering technique from a pure hafnium target at different discharge power levels. The influence of the cathode power on the chemical composition, morphology, crystallographic structure and optical properties of the films was investigated. X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and Fourier-transform infrared spectroscopy (FTIR) were employed to determine the chemical composition and bonding structure. In all cases, the films were found to be amorphous or nanocrystalline with increased crystalline content as the sputtering power was increased, according to XRD and FTIR. In addition, EDX showed that the films were oxygen-rich. The effect of power deposition on the surface topography and morphology of the films was studied using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The AFM and SEM images revealed the emergence of mound morphologies as the cathode power was increased. These features are related to blistering effects probably due to the presence of stress and its promotion within the film thickness. Finally, the optical properties showed an average transmission of 80% in the visible range, and the refractive index determined by spectral ellipsometry (SE) was found to be in the range of 1.85–1.92, close to the reported bulk value. SE was also used to study the film porosity observed by SEM, which can be related to the oxygen-rich character of the films., This research was funded by grant TED2021-129876B-I00 of the Ministerio de Ciencia, Innovación y Universidades (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2 Phase Engineering by Millisecond Range Annealing for Highly Efficient Photocatalysis

  • Prucnal, Slawomir
  • Gago, Raúl
  • Calatayud, David G.
  • Rebohle, Lars
  • Liedke, Maciej Oskar
  • Butterling, Maik
  • Wagner, Andreas
  • Helm, Manfred
  • Zhou, Shengqiang
[EN] Air pollution and the energy crisis are the two main driving forces behind the development of alternative, environmentally friendly methods of energy production. Photoactive materials can be used both to clean the air and to produce green hydrogen for clean energy. Transition metal oxides are one of the most considered materials for high-performance photocatalysis. In this work, we investigate the effect of millisecond flash lamp annealing (FLA) of TiO2 on the degradation of methyl blue (MB) and methyl orange (MO). To reduce the energy consumption of the TiO2 deposition process, the layers were made using magnetron sputtering at room temperature followed by millisecond FLA. By controlling the flash energy input, we can tune the phase formation of TiO2 films from pure anatase to mixed anatase/rutile phases. Scanning electron microscopy, positron annihilation spectroscopy, photoluminescence, and X-ray diffraction studies show that the crystal size and film quality increase with increasing annealing temperature. Photocatalytic experiments demonstrate that FLA-treated TiO2 films are active in degrading both MB and MO. This makes them attractive not only for the production of green hydrogen but also for the purification of water from medical contaminants., This research has received funding from grant TED2021-129876B-I00 of the Ministerio de Ciencia, Innovación y Universidades (Spain). We also acknowledge the use of the SEM facility at the MiNa Laboratory of Instituto de Micro y Nanotecnología (CSIC) and the technical assistance of Dr. Esteban-Mendoza during the measurements. Parts of this research were carried out at ELBE at the Helmholtz-Zentrum Dresden - Rossendorf e.V., a member of the Helmholtz Association. We would like to thank the facility staff (Ahmed G. Attallah and Eric Hirschmann) for assistance. This work was partially supported by the Impulse-und Net-working fund of the Helmholtz Association (FKZ VH-VI-442 Memriox) and the Helmholtz Energy Materials Characterization Platform (03ET7015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Patterned Growth of Photocatalytic Heterostructures via a Biomimetic Molecular Recognition Approach Using Solid-Binding Peptides

  • Castellanos-Aliaga, Ana
  • San-Miguel, Laura
  • Cama, Marta
  • Calatayud, David G.
  • Caballero, Amador C.
  • Jardiel, Teresa
  • Peiteado, Marco
This article belongs to the Special Issue Application of Nanomaterials in the Field of Photocatalysis., [Data Availability Statement] The data presented in this study are available on request from the corresponding author. The data are not publicly available due to privacy., The advancement of photocatalytic materials is critical for addressing environmental challenges such as water remediation, where efficient, robust, and reusable systems are in high demand. In this search, the development of hierarchically organized photocatalytic configurations with spatial control over active sites can significantly enhance performance. With this in mind, we present here a novel biomimetic approach for the patterned growth of TiO2-ZnO photocatalytic heterostructures using solid-binding peptides (SBPs) as molecular linkers. Specifically, using bi-functional SBPs with selective affinity for both oxides, we achieve site-specific, molecularly guided deposition of TiO2 nanoparticles onto pre-patterned ZnO-coated substrates. Leveraging the specific recognition capabilities and strong binding affinities of the engineered SBPs, the proposed biomimetic methodology allows for the fabrication of well-organized hybrid nanostructures under sustainable conditions. Photocatalytic degradation assays employing methyl orange as a model contaminant indicate that the patterned architecture enhances both the accessibility of the active photocatalytic sites and the recoverability of the material. This reusability is a critical parameter for the practical deployment of photocatalytic systems in water purification technologies. The obtained results underscore the potential of SBP-mediated molecular recognition as a versatile tool for green nanofabrication of functional materials with advanced architectural and catalytic properties., The authors acknowledge the Projects TED2021-132779B-I00 and TED2021-129876B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. A. Castellanos-Aliaga acknowledges the Grant FPU21/03335 funded by MICIU/AEI/10.13039/501100011033 and by the FSE+. L. San-Miguel acknowledges the Grant PIPF Program (PIPF-2023/ECO-30217) funded by Comunidad de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fine tuning wettability through multiscale structures based on ion beam microtexturization, nanocolumns and nanoparticles

  • Huttel, Yves
  • Garrido-Segovia, María
  • García-Martín, José Miguel
  • García, M. A.
  • Gago, Raúl
  • Martínez Orellana, Lidia
Resumen del trabajo presentado en el 12th International Workshop of Functional Nanocomposites (Nanoworkshop 2025), celebrado en La Rábida (Huelva, Spain), del 7 al 10 de septiembre de 2025, Wettability of surfaces is a continuously growing field were surfaces with special characteristics are of significant interest from environmental and economical points of view, as they can present properties like self-cleaning of solar panels. While chemical modifications of surfaces are popular to modify the wettability of the surfaces, less is known about the physical effect of morphological changes on the wettability. Here we present a multiscale approach that combines the use of templates by surface microtexturization of titanium (Ti) substrates together with the subsequent deposition of Ti nanocolumnar coatings and the final decoration with Ti nanoparticles (NPs). We will first briefly present the (ultra-)high vacuum physical methods used to induce ripples on Ti substrates by ion beam sputtering (IBS) [1], the growth of tilted nanocolumn arrays by Glancing Angle Deposition (GLAD) [2-3] and NPs fabricated by means of an Ion Cluster Source (ICS) [4], highlighting the control over chemical composition, shape and dimensions of the fabricated nanostructures at each step. Later, we will present some examples where the proposed multiscale approach leads to synergic effects on the wettability by following the evolution of the contact angle at the different stages and with the progressive surface coverage with NPs., Financial support of the Spanish Ministry of Science and Innovation to grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is acknowledged. Financial support is also acknowledged through project TED2021-129876B-I00, financed by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR”., Peer reviewed