Pasar al contenido principal

INTEGRACION DE NANOTECNOLOGIA Y DISEÑO DE BIOCATALIZADORES: NUEVAS ESTRATEGIAS PARA ABORDAR LOS PROBLEMAS DE LA COIMMOVILIZACION DE ENZIMAS

PID2022-136535OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 80
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Tuning Almond Lipase Features by Using Different Immobilization Supports

  • Cherni, Oumaima
  • Carballares Navarro, Diego
  • Siar, El Hocine
  • Abellanas Pérez, Pedro
  • de Andrades, Diandra
  • Rocha Martín, Javier
  • Bahri, Sellema
  • Fernandez Lafuente, Roberto
The lipase from Prunus dulcis almonds has been immobilized for the first time. For this purpose, two different supports, an octadecyl methacrylate particulate support, and aminated agarose (monoaminoethyl-N-aminoethyl) have been utilized. Both immobilized biocatalysts show improved enzyme stability, but great changes in enzyme specificity were detected. The enzyme immobilized via ion exchange maintained its activity intact versus p-nitrophenyl butyrate, while the enzyme immobilized on the hydrophobic support fully lost its activity versus this substrate, which was confirmed to be due to substrate adsorption on the support. However, this biocatalyst was much more active versus triacetin (more than 10-fold), R- or S- methyl mandelate at pH 7. At pH 9, a strong effect of using phosphate or bicarbonate as reaction buffers was detected. Using bicarbonate, the interfacially immobilized enzyme presented no activity versus R-isomer, but it was very active versus the S-isomer and triacetin. Using a phosphate buffer during the reaction, all compounds were recognized as substrates. The enzyme immobilized via ion exchange was significantly more active using phosphate; in fact, using bicarbonate, the enzyme was inactive versus both methyl mandelate isomers. This paper shows for the first time a great interaction between the effects of the immobilization protocol and buffer used during reaction on the enantiospecificity of lipases.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Designing tailor-made steric matters to improve the immobilized ficin specificity for small versus large proteins

  • Siar, El Hocine
  • Abellanas Pérez, Pedro
  • Morellon Sterling, Roberto
  • Bolívar Bolívar, Juan Manuel
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
The development of strategies that can permit to adjust the size specificity of immobilized proteases by the generation of steric hindrances may enlarge its applicability. Using as a model ficin immobilized on glyoxyl agarose, two strategies were assayed to generate tailor made steric hindrances. First, ficin has been coimmobilized on supports coated with large proteins (hemoglobin or bovine serum albumin (BSA)). While coimmobilization of ficin with BSA presented no effect on the activity versus any of the assayed substrates, coimmobilization with hemoglobin permitted to improve the immobilized ficin specificity for casein versus hemoglobin, but still significant activity versus hemoglobin remained. Second, aldehyde-dextran has been employed to modify the immobilized ficin, trying to generate steric hindrances to avoid the entry of large proteins (hemoglobin) while enabling the entry of small ones (casein). This also increased the size specificity of ficin, but still did not suppress the activity versus hemoglobin. The combination of both strategies and the use of 37ºC during the proteolysis enabled to almost fully nullify the hydrolytic activity versus hemoglobin while preserving a high percentage of the activity versus casein. The modifications improved enzyme stability and the biocatalyst could be reused for 5 cycles without alteration of its properties.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Glutaraldehyde modification of lipases immobilized on octyl agarose beads: Roles of the support enzyme loading and chemical amination of the enzyme on the final enzyme features

  • Abellanas Pérez, Pedro
  • Carballares Navarro, Diego
  • Fernández Lafuente, Roberto
  • Rocha Martín, Javier
Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) have been immobilized on octyl agarose at low loading and at a loading exceeding the maximum support capacity. Then, the enzymes have been treated with glutaraldehyde and inactivated at pH 7.0 in Tris-HCl, sodium phosphate and HEPES, giving different stabilities. Stabilization (depending on the buffer) of the highly loaded biocatalysts was found, very likely as a consequence of the detected intermolecular crosslinkings. This did not occur for the lowly loaded biocatalysts. Next, the enzymes were chemically aminated and then treated with glutaraldehyde. In the case of TLL, the intramolecular crosslinkings (visible by the apparent reduction of the protein size) increased enzyme stability of the lowly loaded biocatalysts, an effect that was further increased for the highly loaded biocatalysts due to intermolecular crosslinkings. Using CALB, the intramolecular crosslinkings were less intense, and the stabilization was lower, even though the intermolecular crosslinkings were quite intense for the highly loaded biocatalyst. The stabilization detected depended on the inactivation buffer. The interactions between enzyme loading and inactivating buffer on the effects of the chemical modifications suggest that the modification and inactivation studies must be performed under the target biocatalysts and conditions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Effect of the support alkyl chain nature in the functional properties of the immobilized lipases

  • De Andrades, Diandra
  • Abellanas Perez, Pedro
  • Rocha Martín, Javier
  • Lopez Gallego, Fernando
  • Alcántara León, Andrés Rafael
  • Polizeli, Maria de Lourdes Teixeira de Moraes
  • Fernandez Lafuente, Roberto
Supports coated with amino-hexyl and amino octyl have been prepared from glyoxyl agarose beads and compared in their performance with octyl-agarose to immobilize lipases A and B from Candida antarctica (CALA and CALB). Immobilization courses were similar using all supports, but enzyme release was more difficult using the amino-alkyl supports suggesting a mixed interfacial activation/ionic exchange immobilization. The enzyme activity and specificity (using p-nitrophenyl propionate, triacetin and both isomers of methyl mandelate) greatly depended on the support. In many instances the enzymes immobilized on the new supports offered higher activities and enantiospecificity in the hydrolysis of both enantiomers of methyl mandelate (mainly using CALB). This was coupled to a lower enzyme stability using the new supports, even in the presence of high ionic strength, suggesting that the amphipathic could be responsible of the enzyme lower stability. Using CALB, it was possible to detect a higher exposition of the enzyme Trp groups to the medium by florescence spectra after its immobilization on the amino-alkyl-supports, correlating to the higher activity and lower stability results.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optimizing the activation of agarose beads with divinyl sulfone for enzyme immobilization and stabilization

  • Abellanas Pérez, Pedro
  • Andrades, Diandra de
  • Alcántara León, Andrés Rafael
  • Polizeli, Maria de Lourdes Teixeira de Moraes
  • Rocha Martín, Javier
  • Fernández Lafuente, Roberto
The focus of the present work is to find the optimal conditions for the activation of agarose beads with divinyl sulfone (DVS). The reactivity of the vinyl sulfone groups in the support was checked by the support capacity to react with ethylamine; via elemental analysis. In addition, trypsin was used as a model enzyme to test the immobilization and stabilization capabilities of the different supports. The higher the pH, the more vinyl sulfone groups are incorporated into the support, but lower reactivity versus ethylamine is observed. Too long activation times led to similar results. A N/S ratio of 1 means that all vinyl sulfone groups were reactive, and it was always lower than tis figure. The N in the support was 50 % of the amount observed for glyoxyl supports activated with ethylenediamine, suggesting the VS polymerization may be a likely explanation for this result. The higher N/S ratio in the support (modified with ethylamine), the higher the obtained stabilization, very likely by the lower polymerization of the vinyl sulfone on the support. We propose 360 mM divinyl sulfone, at pH 11.5 and 2 h as optimal conditions to reach the highest enzyme stabilization by immobilization in this support.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Considerations for the optimization of biocatalyst formulation in multi-enzymatic reactions: Co-immobilized enzymes advantages depend on enzyme kinetic properties

  • Carballares Navarro, Diego
  • Woodley, John M.
  • Fernandez-Lafuente, Roberto
  • Bolívar Bolívar, Juan Manuel
The design of combi-biocatalyst for optimizing cascade reactions is challenging, particularly in terms of the choice of the biocatalyst formulations, including the relative amounts of enzymes to be used, and the experimental set-up strategy chosen for optimization. This paper demonstrates, via dynamic simulation, the optimization of a combi-biocatalyst designed for a multi-cascade two-reaction series (A → B, B → C) involving two enzymes (E1, E2) in free, individually immobilized, or co-immobilized formulations. This has been analyzed in three different scenarios: (1) KM is identical for both enzymes (i.e. KM1 = KM2), (2) KM1 > KM2, and (3) KM1 < KM2. The ratio of mass transport and reaction times was defined using a modified Thiele modulus, providing a useful metric to evaluate the relative magnitude of mass transport limitations. Global mass transport was considered. In the absence of mass transport limitations, the three catalyst formulations gave identical results. However, when (moderate) mass transport limitations were included, substrate (A) and intermediate (B) concentration gradients appear, meaning that the multi-enzyme catalyst formulation becomes critical. The results indicate that although enzyme co-immobilization always provides some kinetic advantages compared to the use of individually immobilized enzymes, these advantages increased when KM2 < KM1 and vice versa. The first situation also provides the most efficient combi-biocatalyst. The optimal enzyme ratio in all enzyme formulations, determined by using either initial rates or time to reach the target yield, is in some instances quite different. This suggests that, although more time-consuming, the latter parameter should be utilized in the design of the enzyme mass ratio for the combined biocatalysts. The optimal enzyme ratio depends on the enzyme formulation. Therefore, extrapolating the results achieved using individually immobilized enzymes to co-immobilized biocatalysts can lead to the preparation of a biocatalyst with sub-optimal efficiency.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Biocatalytic production of biolubricants: strategies, problems and future trends

  • Monteiro, Rodolpho R.C.
  • Berenguer Murcia, Ángel
  • Rocha Martín, Javier
  • Vieira, Rodrigo S.
  • Fernandez Lafuente, Roberto
The increasing worries by the inadequate use of energy and the preservation of nature are promoting an increasing interest in the production of biolubricants. After discussing the necessity of producing biolubricants, this review focuses on the production of these interesting molecules through the use of lipases, discussing the different possibilities (esterification of free fatty acids, hydroesterification or transesterification of oils and fats, transesterification of biodiesel with more adequate alcohols, estolides production, modification of fatty acids). The utilization of discarded substrates has special interest due to the double positive ecological impact (e.g., oil distillated, overused oils). Pros and cons of all these possibilities, together with general considerations to optimize the different processes will be outlined. Some possibilities to overcome some of the problems detected in the production of these interesting compounds will be also discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A review on the immobilization of bromelain

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Tavano, Olga Luisa
  • Abellanas-Perez, Pedro
  • Andrades, Diandra de
  • Santiz-Gómez, José Alfredo
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
This review shows the endeavors performed to prepare immobilized formulations of bromelain extract, usually from pineapple, and their use in diverse applications. This extract has a potent proteolytic component that is based on thiol proteases, which differ depending on the location on the fruit. Stem and fruit are the areas where higher activity is found. The edible origin of this enzyme is one of the features that determines the applications of the immobilized bromelain to a more significant degree. The enzyme has been immobilized on a wide diversity of supports via different strategies (covalent bonds, ion exchange), and also forming ex novo solids (nanoflowers, CLEAs, trapping in alginate beads, etc.). The use of preexisting nanoparticles as immobilization supports is relevant, as this facilitates one of the main applications of the immobilized enzyme, in therapeutic applications (as wound dressing and healing components, antibacterial or anticancer, mucus mobility control, etc.). A curiosity is the immobilization of this enzyme on spores of probiotic microorganisms via adsorption, in order to have a perfect in vivo compatibility. Other outstanding applications of the immobilized enzyme are in the stabilization of wine versus haze during storage, mainly when immobilized on chitosan. Curiously, the immobilized bromelain has been scarcely applied in the production of bioactive peptides.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biocatalytic production of biolubricants: Strategies, problems and future trends

  • Monteiro, Rodolpho R.C.
  • Berenguer-Murcia, Ángel
  • Rocha-Martin, Javier
  • Vieira, Rodrigo S.
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The increasing worries by the inadequate use of energy and the preservation of nature are promoting an increasing interest in the production of biolubricants. After discussing the necessity of producing biolubricants, this review focuses on the production of these interesting molecules through the use of lipases, discussing the different possibilities (esterification of free fatty acids, hydroesterification or transesterification of oils and fats, transesterification of biodiesel with more adequate alcohols, estolides production, modification of fatty acids). The utilization of discarded substrates has special interest due to the double positive ecological impact (e.g., oil distillated, overused oils). Pros and cons of all these possibilities, together with general considerations to optimize the different processes will be outlined. Some possibilities to overcome some of the problems detected in the production of these interesting compounds will be also discussed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A comprehensive review of lipase-catalyzed acidolysis as a method for producing structured glycerides

  • Tacias-Pascacio, Veymar G.
  • Abellanas-Perez, Pedro
  • Andrades, Diandra de
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
The production of structured lipids is a current trend in food technology in order to enhance the properties of fats and oils. Lipases have been utilized in many instances for this purpose, in most examples in an immobilized form. In this review, after discussing the different strategies to produce artificial lipids using lipases (esterification, transesterification, interesterification), we have focused on acidolysis. The reaction commences with hydrolysis at one position of the triglyceride molecule and is followed by the esterification between the released hydroxyl group and the target fatty acid (although other carboxylic acids can be used, such as phenolic acid derivatives). This means that water plays a double role, as substrate in the first step and as an undesired by-product in the second one. Therefore, the control of water activity becomes critical in these reactions. This review discusses the advantages, possibilities and drawbacks of this strategy to produce tailor-made designed lipids, summarizing many of the papers related to this strategy. The summarized results show the complexity of this reaction that can make the understanding and reproducibility of the reactions complex if there are no strict controls of all parameters determining the final yields.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A review on lipase immobilization on hydrophobic supports incorporating systematic mapping principles

  • Guimarães, José Renato
  • Oliveira, Kaíque Souza Gonçalves Cordeiro
  • Gonçalves, Maria Carolina Pereira
  • Romanelli, João Paulo
  • Lopes, Laiane Antunes
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Tardioli, Paulo W.
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
A review of the literature covering research on the immobilization of lipases on hydrophobic supports was performed using systematic mapping (SM) concepts. This approach consists of a rigorous review methodology used to catalog evidence, identify gaps at the frontier of knowledge, unknown trends, and research groups. Our results showed a wide variety of available lipases, including commercial, wild-type and recombinant strains. However, the most commonly used lipases are lipases from Thermomyces lanuginosus (TLL), Candida rugosa (CRL) or Rhizomucor miehei (RML) and lipase B from Candida antarctica (CALB). A wide variety of supports with different degrees of hydrophobicity were identified and the supports activated with a layer of octyl or octadecyl groups were the most used. The advantages of lipase immobilization on these supports were discussed. Among them, the immobilization, purification, stabilization and hyperactivation of lipases in a single step stand up. Moreover, problems related to lipase immobilization by interfacial activation were highlighted (mainly enzyme release). Strategies to overcome these problems include immobilization on heterofunctional supports or intermolecular crosslinking of enzymes immobilized by physical and/or chemical agents. The possibility of increasing the capacity of supports by lipase multilayer immobilization was also discussed. Finally, the structure, distribution of the network and the frequency of co-occurrence between lipases and supports were elucidated to determine the possible hotspots and hitherto unexplored advancement in knowledge.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Peptides with biological and technofunctional properties produced by bromelain hydrolysis of proteins from different sources: A review

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, Daniel
  • Tavano, Olga Luisa
  • Berenguer-Murcia, Ángel
  • Torrestina-Sánchez, Beatriz
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Bromelains are cysteine peptidases with endopeptidase action (a subfamily of papains), obtained from different parts of vegetable belonging to the Bromeliaceae family. They have some intrinsic medical activity, but this review is focused on their application (individually or mixed with other proteases) to produce bioactive peptides. When compared to other proteases, perhaps due to the fact that they are commercialized as an extract containing several proteases, the hydrolysates produced by this enzyme tends to have higher bioactivities than other common proteases. The peptides and the intensity of their final properties depend on the substrate protein and reaction conditions, being the degree of hydrolysis a determining parameter (but not always positive or negative). The produced peptides may have diverse activities such as antioxidant, antitumoral, antihypertensive or antimicrobial ones, among others or they may be utilized to improve the organoleptic properties of foods and feeds. Evolution of the use of this enzyme in this application is proposed to be based on a more intense direct application of Bromeliaceae extract, without the cost associated to enzyme purification, and the use of immobilized biocatalysts of the enzyme by simplifying the enzyme recovery and reuse, and also making the sequential hydrolysis using diverse proteases possible.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

  • Bilal, Muhammad
  • Qamar, Sarmad Ahmad
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

When immobilization of enzymes results in user-unfriendly biocatalysts: Secondary immobilization and other solutions to overcome handling shortcomings

  • Abellanas-Perez, Pedro
  • Chen, Ziyang
  • Tacias-Pascacio, Veymar G.
  • Berenguer-Murcia, Ángel
  • Mendes, Adriano A.
  • Rocha-Martin, Javier
  • Fernández Lafuente, Roberto
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
One recent trend in enzyme immobilization is the use of relatively simple immobilization techniques that produce ex novo solids containing the enzymes. Many of them may present some problems in the handling or during operation (by size and/or mechanical resistance), while bringing forth great improvements in the enzyme features. Other methods use metals, that can lead to unexpected effects. To solve this handling problems may be critical for the implementation of these biocatalysts. This is exemplified using different biocatalysts (enzymes immobilized on pre-existing macroporous supports or nanoparticles, crosslinking enzyme aggregates or enzyme-nanoflowers). After presenting the different immobilization techniques, and discussing the possible role of the metals, we shall discuss how the recovery and mechanical fragility issues can be solved. Recovering can be simplified just by using magnetic materials, while trapping in alginate or polyvinyl alcohol polymeric beads or immobilization in larger particles may solve both problems. Some additional advantages of this strategy are the improvement of enzyme stability, generation of enzyme nanoenvironments, which can permit the promotion of partition effects and produce enzyme stabilization in the presence of hydrophobic organic solvents or improve thermodynamic yields.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation and Characterization of a Multicomponent Arthrospira platensis Biomass Hydrolysate with Superior Anti-Hypertensive, Anti-Hyperlipidemic and Antioxidant Activities via Selective Proteolysis

  • Otero Hernández, Cristina
  • Verdasco-Martín, Carlos M.
Arthrospira platensis biomass is a sustainable source of bioactive products for the food, cosmetic, and medicine industries. As well as primary metabolites, different secondary metabolites can be obtained via distinct enzymatic degradation of biomass. In this work, different hydrophilic extracts were obtained after treating the biomass with: (i) a serine endo-peptidase (Alcalase®), (ii) a mixture of amino-, dipeptidyl-, and endo-peptidases (Flavourzyme®), (iii) a mixture of endo-1,3(4)-β-glucanase and an endo-1,4-xylanase, and β-glucanase (Ultraflo®), and (iv) an exo-1,3-glucanase (Vinoflow®) (all the enzymes from Novozymes A/S (bagsvaerd, Denmark)); with subsequent extraction of the biocomponents with an isopropanol/hexane mixture. The composition of each aqueous phase extract (in terms of amino acids, peptides, oligo-elements, carbohydrates, and phenols) and their in vitro functional properties were compared. The conditions described in this work using the enzyme Alcalase® permits the extraction of eight distinctive peptides. This extract is 7.3 times more anti-hypertensive, 106 times more anti-hypertriglyceridemic, 26 times more hypocholesterolemic, has 4.4 times more antioxidant activities, and has 2.3 times more phenols, than the extract obtained without any prior enzyme biomass digestion. Alcalase® extract is an advantageous product with potential application in functional food, pharmaceutics, and cosmetics., This work was partially supported by the Program of I + D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina” with co-financiation of the European Structural Fund (European Social Fund -EFS- and European Fund for Regional Development- FEDER-), and by Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (Ref. PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Immobilization and Stabilization of Trypsin from the Porcine Pancreas on Chitosan and Its Catalytic Performance in Protein Hydrolysis

  • Miguez, João Pedro
  • Fernández-Lafuente, Roberto
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
In this study, trypsin from the porcine pancreas was immobilized on a heterofunctional support prepared by activating chitosan (Chit) hydrogel with glutaraldehyde (GA), then functionalizing it with glycine (Chit–GA–Gly). The catalytic performance of the immobilized trypsin in the hydrolysis reactions was compared with the catalytic performance of the immobilized enzyme on glutaraldehyde-activated chitosan (Chit–GA) and chitosan hydrogel (Chit). The maximum concentration of immobilized protein on Chit–GA–Gly was approximately 16 mg·g−1 at pH 9.0 (5 mmol·L−1 buffer sodium carbonate) at 25 °C from an offered protein loading of 20 mg·g−1. This biocatalyst exhibited maximum specific activity (SA) of 33.1 ± 0.2 nmol·min−1·mg−1 for benzoyl-DL-arginine-p-nitroanilide (BAPNA) hydrolysis, twice as high as the enzyme immobilized on the classic Chit–GA support (SA values ranging between 6.7 ± 0.1 nmol·min−1·mg−1 and 8.1 ± 0.1 nmol·min−1·mg−1). The Elovich kinetic model was used to describe the adsorption process using low (3 mg·g−1) and high (20 mg·g−1) initial protein loadings. The optimum temperature for BAPNA hydrolysis catalyzed by the immobilized trypsin (60 °C) was 10 °C higher than that of its soluble form. Additionally, the immobilized enzyme was 16 to 20 times more stable than its soluble form at 50–55 °C. Thermodynamic studies were conducted to elucidate the kinetics of the thermal inactivation process of soluble and immobilized forms. Complete hydrolysis of bovine serum albumin (BSA) at 37 °C was achieved after 2 h using a soluble enzyme, while for its immobilized form, the hydrolysis yield was 47%. Reuse tests revealed that this biocatalyst retained 37% of its original activity after 10 successive hydrolysis batches. Based on these results, this support could be used as an interesting alternative for producing heterogeneous biocatalysts with high catalytic activity and thermal stability when producing protein hydrolysates., The present study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Brazil, Finance Code 001. The authors are also thankful for the financial support of Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG), Brazil (Process APQ-01691-21), Ministerio de Ciencia e Innovación, and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). Adriano A. Mendes thanks the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for the research fellowship (PQ-2 CA EQ, Grant 310633/2020-6)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Support Matrix and Crosslinking Agents on Nutritional Properties of Orange Juice during Enzyme Clarification: A Comparative Study

  • Silva, Pâmela M. da
  • Esparza-Flores, Eli Emanuel
  • Virgili, Anike H.
  • Menezes, Eliana W. de
  • Fernández-Lafuente, Roberto
  • Dal Magro, Lucas
  • Rodrigues, Rafael C.
This study investigated the impact of a support matrix and active group on the support to the nutritional properties of orange juice after juice clarification. Pectinase was immobilized on chitosan and aminated silica supports, activated with genipin or glutaraldehyde, and applied for juice clarification. The effects on various juice properties, including reducing sugars, total soluble solids, vitamin C, and phenolic compounds, juice color, and pH, were evaluated. The results revealed that the immobilization on chitosan activated using genipin resulted in the highest biocatalyst activity (1211.21 U·g−1). The juice treatments using the biocatalysts led to turbidity reduction in the juice (up to 90%), with the highest reductions observed in treatments involving immobilized enzyme on chitosan. Importantly, the enzymatic treatments preserved the natural sugar content, total soluble solids, and pH of the juice. Color differences between treated and raw juice samples were especially relevant for those treated using enzymes, with significant differences in L* and b*, showing loss of yellow vivid color. Analysis of phenolic compounds and vitamin C showed no significant alterations after the enzymatic treatment of the raw juice. According to our results, the clarification of orange juice using immobilized enzymes can be a compromise in turbidity reduction and color reduction to maintain juice quality., This research was funded by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Grant number 405418/2021-3; Fundação de Amparo à Pesquisa do Rio Grande do Sul (FAPERGS), Grant numbers 21/2551-0002270-1 and 22/2551-0000397-4; Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government), Grant number PID2022-136535OB-I00; and Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) from Mexican Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Effects of Buffer Nature on Immobilized Lipase Stability Depend on Enzyme Support Loading

  • Abellanas-Pérez, Pedro
  • Carballares, Diego
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
The lipases from Thermomyces lanuginosus (TLL) and Candida antarctica (B) (CALB) were immobilized on octyl-agarose beads at 1 mg/g (a loading under the capacity of the support) and by overloading the support with the enzymes. These biocatalysts were compared in their stabilities in 10 mM of sodium phosphate, HEPES, and Tris-HCl at pH 7. Lowly loaded CALB was more stable than highly loaded CALB preparation, while with TLL this effect was smaller. Phosphate was very negative for the stability of the CALB biocatalyst and moderately negative using TLL at both loadings. The stability of the enzymes in HEPES and Tris-HCl presented a different response as a function of the enzyme loading (e.g., using lowly loaded CALB, the stabilities were similar in both buffers, but it was clearly smaller in HEPES using the highly loaded biocatalysts). Moreover, the specific activity of the immobilized enzymes versus p-nitrophenol butyrate, triacetin and R- or S-methyl mandelate depended on the buffer, enzyme loading, and interaction between them. In some cases, almost twice the expected activity could be obtained using highly loaded octyl-CALB, depending on the buffer. A co-interaction between the effects on enzyme activity and the specificity of support enzyme loading and buffer nature was detected., This research was funded by Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Almond Lipase Features by Using Different Immobilization Supports

  • Cherni, Oumaima
  • Carballares, Diego
  • Siar, El Hocine
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Rocha-Martín, Javier
  • Bahri, Sellema
  • Fernández-Lafuente, Roberto
The lipase from Prunus dulcis almonds has been immobilized for the first time. For this purpose, two different supports, an octadecyl methacrylate particulate support, and aminated agarose (monoaminoethyl-N-aminoethyl) have been utilized. Both immobilized biocatalysts show improved enzyme stability, but great changes in enzyme specificity were detected. The enzyme immobilized via ion exchange maintained its activity intact versus p-nitrophenyl butyrate, while the enzyme immobilized on the hydrophobic support fully lost its activity versus this substrate, which was confirmed to be due to substrate adsorption on the support. However, this biocatalyst was much more active versus triacetin (more than 10-fold), R- or S- methyl mandelate at pH 7. At pH 9, a strong effect of using phosphate or bicarbonate as reaction buffers was detected. Using bicarbonate, the interfacially immobilized enzyme presented no activity versus R-isomer, but it was very active versus the S-isomer and triacetin. Using a phosphate buffer during the reaction, all compounds were recognized as substrates. The enzyme immobilized via ion exchange was significantly more active using phosphate; in fact, using bicarbonate, the enzyme was inactive versus both methyl mandelate isomers. This paper shows for the first time a great interaction between the effects of the immobilization protocol and buffer used during reaction on the enantiospecificity of lipases., Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glyoxyl-ficin: An example where a more intense multipoint covalent attachment may decrease enzyme stability

  • Siar, El Hocine
  • Morellon-Sterling, Roberto
  • Carballares, Diego
  • Rocha-Martin, J.
  • Barbosa, Oveimar
  • Bolívar Bolívar, Juan Manuel
  • Fernández-Lafuente, Roberto
The immobilization of ficin extract (sulfidryl proteases) on glyoxyl agarose beads stabilized it, but there is a clear stability maximum after 3 h of immobilization, being the 24 h biocatalyst less stable when thermally inactivated in presence of air. The incubation of the thermally inactivated biocatalysts in the presence of dithiothreitol permitted to recover almost total activity of the biocatalysts prepared for 24 h of immobilization, while the enzyme immobilized for 3 h recovered less activity. This suggested that the main cause of the faster enzyme inactivation of the 24 h biocatalyst was the Cys oxidation. This was confirmed by inactivating the Cys blocked biocatalysts by using 2,2′-dipyridyldisulfide. Again, a higher percentage of the initial activity (when unblocked by incubation in mercaptoethanol the thermally inactivated biocatalysts) was observed for the 24 h biocatalyst. The use of helium atmosphere enabled to greatly improve the enzyme stability of all immobilized biocatalysts, confirming the highest stability of the biocatalyst immobilized for 24 h. Results suggested that this biocatalyst was in fact the most rigid one, but that the distortion induced by the immobilization produced a higher exposition of the catalytic Cys, and this way, its oxidation becomes faster in the presence of oxygen. © 2023 The Authors, We gratefully recognize the financial support from Ministerio de Ciencia e Innovaci´on and Agencia Estatal de Investigaci´on (Spanish Government) (PID2021-122398OB-I00 and PID2022-136535OB-I00). The authors also thank the financial support from Ministerio de Ciencia, Tecnología e Innovaci´on, Ministerio de Educaci´on Nacional, Ministerio de Industria, Comercio y Turismo, and ICETEX, Programme Ecosistema Científico-Colombia Científica from Fondo Francisco Jos´e de Caldas; Grant RC-FP44842-212-2018. RMS thanks the Ministerio de Educacion -Spanish Government for a FPU fellowship, DC thank to Ministerio de Ciencia e Innovaci´on-Spanish Government for a FPI. Prof A. Berenguer (Alicante University) help and suggestions during the writing of this paper are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The nature of the buffer alters the effects of the chemical modification on the stability of immobilized lipases

  • Abellanas-Pérez, Pedro
  • Carballares, Diego
  • Rocha-Martin, J.
  • Fernández-Lafuente, Roberto
The objective of this paper was to analyze whether an interaction between the effects of the buffer nature and chemical modification on enzyme stability exists. For this, the lipase B from Candida antarctica (CALB) and the lipase from Thermomyces lanuginosus (TLL) were immobilized on octyl agarose beads and modified with picryl sulfonic acid (TNBS) and ethylenediamine via the carbodiimide route. The obtained biocatalysts were them inactivated in different buffers (2-amino-2-(hydroxymethyl)propane-1,3-diol (Tris)-HCl, N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonic acid) (HEPES) or phosphate). A significant interaction was found between the chemical modification of the enzyme surfaces and their stabilities in these different buffers. While phosphate was the buffer where the lowest enzyme stabilities were found for both unmodified immobilized enzymes, the differences on enzyme stabilities become much smaller after some chemical modifications. In many instances, chemical modification improves enzyme stability when using a buffer and was negative when using the other one (e.g., TNBS modification of TLL was positive using Tris-HCl or negative using the other buffers, amination of CALB decreased its stability when inactivated in Tris-HCl or HEPES while it almost had no effect in phosphate). Thus, clear co-interactions of the effects on enzyme stability between chemical modification and buffer nature were established. © 2023 The Authors, DC thank to Ministerio de Ciencia e Innovaci´on-Spanish Government for a FPI. This research was funded by Ministerio de Ciencia e Innovaci´on and Agencia Estatal de Investigaci´on (Spanish Government) (PID2022-136535OB-I00). We gratefully recognize Prof. ´Angel Berenguer-Murcia for his suggestions and help during the writing of this paper., Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-Catalyzed Synthesis of Glycerol Carbonate in Solventless Liquid One Phase Conditions: Role of Reaction Medium Engineering on Catalytic Performance

  • Gonzalez-Miranda, D.
  • Carballares, Diego
  • Pedregal, T.
  • Fernández-Lafuente, Roberto
  • Ladero, M.
  • Bolívar Bolívar, Juan Manuel
This study pursues the efficient synthesis of glycerol carbonate (GC) using immobilized lipases on octyl agarose by means of interfacial activation under solventless conditions. The monophasic system formed between glycerol and ethylene carbonate at elevated temperatures displays low viscosity and minimizes mass transfer hindrances, which represent promising novel conditions in this biocatalytic process. Immobilized lipases from Candida rugosa and Thermomyces lanuginosus on octyl agarose were identified as suitable catalysts. While thermally denatured biocatalysts lost their catalytic capacity completely, biocatalysts with the catalytic Ser irreversibly inhibited showed significant enzymatic activity, suggesting that the catalytic Ser may not play a key role in the reaction. The influence of various operational variables and conditions: temperature, catalyst concentration, and reaction setup (2 mL vials and 100 mL round-bottom flasks with magnetic stirring were used) were studied with the aim of achieving high conversions (>99%) and yields (>99%) in short reaction times. Among the tested lipases, immobilized C. rugosa lipase exhibited the highest turnover numbers. The use of immobilized lipases allowed for multiple reaction cycles without a significant decrease in the initial reaction rate or the final conversion, highlighting the potential for catalyst reuse. This research achieved remarkable results in terms of reaction productivity, product concentration, atom efficiency, and turnover number compared to any previous study, emphasizing the significance of reaction engineering approaches in developing efficient sustainable processes for synthesizing valuable chemicals. The study emphasizes the potential of lipases as catalysts for GC synthesis and underscores the importance of considering monophasic solventless conditions at high temperatures for improved reaction efficiency and high reaction atomic efficiency. © 2023 The Authors. Published by American Chemical Society., J.M.B. acknowledges funding from the Government of Community of Madrid (2018-T1/BIO-10200) and from UCM-Santander (PR108/20). Support from MINECO andAEI through projects CTQ2017-84,963-C2-1-R, PCI2018-093,114, and PID2020-114365RB-C21 is gratefully acknowl-edged. RFL acknowledges the support from MINECO andAEI through project PID2022-136535OB-I00, Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing biotechnological applications of L-asparaginase: Immobilization on amino-epoxy-agarose for improved catalytic efficiency and stability

  • de Melo, D.W.
  • Fernández-Lafuente, Roberto
  • Rodrigues, R.C.
L-asparaginase has been shown to be effective in reducing acrylamide formation in food and in treating certain cancers, such as acute lymphoblastic leukemia. This study aimed to improve the application of L-asparaginase in these areas, through its immobilization in two distinct supports: epoxy-agarose and amino-epoxy-agarose. Different immobilization conditions were investigated, including immobilization pH and buffer concentration. The best activity results were obtained employing amino-epoxy-agarose, being the 0.1 M sodium carbonate buffer pH 10 the conditions that offered the highest immobilization yield (76%), immobilization efficiency (89.8%) and relative activity (68.2%). Immobilization of L-asparaginase in amino-epoxy-agarose improved its catalytic efficiency and stability, including at pH 4 and 60 °C. All immobilized biocatalysts preserved more than 70% of their activity after 7 cycles of reuse, and maintained about 82% of their activity after 60 days of storage at 4°C. These results show the efficacy of immobilized biocatalysts in the preservation of enzymatic activity and highlight their potential for biotechnological applications. © 2023 Elsevier Ltd, This work was supported by the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq – process 405418/2021-3), Fundação de Amparo à Pesquisa do Rio Grande do Sul (FAPERGS – processes 21/2551-0002270-1 and 22/2551-0000397-4), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) from Brazilian Government. We also gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of lipase immobilization on hydrophobic supports incorporating systematic mapping principles

  • Guimarães, José R.
  • Oliveira, K.S.G.C.
  • Gonçalves, M.C.P.
  • Romanelli, J.P.
  • Lopes, L.A.
  • Berenguer-Murcia, I.
  • Fernández-Lafuente, Roberto
  • Tardioli, P.W.
A review of the literature covering research on the immobilization of lipases on hydrophobic supports was performed using systematic mapping (SM) concepts. This approach consists of a rigorous review of the methodology used to catalog evidence, to identify gaps at the frontier of knowledge, to identify unknown trends, and to list research groups. Our results show a wide variety of available lipases, including commercial, wild-type and recombinant strains. However, the most commonly used lipases are lipases from Thermomyces lanuginosus (TLL), Candida rugosa (CRL) or Rhizomucor miehei (RML) and lipase B from Candida antarctica (CALB). A wide variety of supports with different degrees of hydrophobicity were identified and the supports activated with a layer of octyl or octadecyl groups were the most commonly used. The advantages of lipase immobilization on these supports are discussed. Among them, the immobilization, purification, stabilization and hyperactivation of lipases in a single step stand out. Moreover, problems related to lipase immobilization by interfacial activation are highlighted (mainly enzyme release). Strategies to overcome these problems include immobilization on heterofunctional supports or intermolecular crosslinking of enzymes immobilized by physical and/or chemical agents. The possibility of increasing the capacity of supports by lipase multilayer immobilization is also discussed. Finally, the structure, distribution of the network and the frequency of co-occurrence between lipases and supports are elucidated to determine the possible hotspots and hitherto unexplored advances in knowledge. © 2023 The Royal Society of Chemistry, This work was funded by São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022-136535OB-I00 and MCIN/AEI/10.13039/501100011033/) and by FEDER A Way of Making Europe funds (project PID2021-123079OB-I00), and Generalitat Valenciana (CIPROM/2021/70)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effects of the chemical modification on immobilized lipase features are affected by the enzyme crowding in the support

  • Abellanas-Pérez, Pedro
  • Carballares, Diego
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
In this article, we have analyzed the interactions between enzyme crowding on a given support and its chemical modification (ethylenediamine modification via the carbodiimide route and picryl sulfonic (TNBS) modification of the primary amino groups) on the enzyme activity and stability. Lipase from Thermomyces lanuginosus (TLL) and lipase B from Candida antarctica (CALB) were immobilized on octyl-agarose beads at two very different enzyme loadings, one of them exceeding the capacity of the support, one well under this capacity. Chemical modifications of the highly loaded and lowly loaded biocatalysts gave very different results in terms of activity and stability, which could increase or decrease enzyme activity depending on the enzyme support loading. For example, both lowly loaded biocatalysts increased their activity after modification while the effect was the opposite for the highly loaded biocatalysts. Additionally, the modification with TNBS of highly loaded CALB biocatalyst increased its stability while decrease the activity. © 2023 The Authors. Biotechnology Progress published by Wiley Periodicals LLC on behalf of American Institute of Chemical Engineers., Agencia Estatal de Investigación, Grant/Award Number: PID2022-136535OB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Support Enzyme Loading Influences the Effect of Aldehyde Dextran Modification on the Specificity of Immobilized Ficin for Large Proteins

  • Siar, El Hocine
  • Abellanas-Pérez, Pedro
  • Rocha-Martin, J.
  • Fernández-Lafuente, Roberto
It has been reported that the modification of immobilized glyoxyl–ficin with aldehyde dextran can promote steric hindrances that greatly reduce the activity of the immobilized protease against hemoglobin, while the protease still maintained a reasonable level of activity against casein. In this paper, we studied if this effect may be different depending on the amount of ficin loaded on the support. For this purpose, both the moderately loaded and the overloaded glyoxyl–ficin biocatalysts were prepared and modified with aldehyde dextran. While the moderately loaded biocatalyst had a significantly reduced activity, mainly against hemoglobin, the activity of the overloaded biocatalyst was almost maintained. This suggests that aldehyde dextran was able to modify areas of the moderately loaded enzyme that were not available when the enzyme was overloaded. This modification promoted a significant increase in biocatalyst stability for both biocatalysts, but the stability was higher for the overloaded biocatalyst (perhaps due to a combination of inter- and intramolecular crosslinking), This study was funded by Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocatalytic Production of Solketal Esters from Used Oil Utilizing Treated Macauba Epicarp Particles as Lipase Immobilization Support: A Dual Valorization of Wastes for Sustainable Chemistry

  • Miguel Júnior, José
  • Dimas, João V. B.
  • Barbosa, Milson S.
  • Gomes, Raphael A. B.
  • Carvalho, Ana K. F.
  • Soares, Cleide M. F.
  • Fernández-Lafuente, Roberto
  • Mendes, Adriano A
This study describes the production of solketal esters from used soybean cooking oil (USCO) via enzymatic hydroesterification. This process consists of the complete hydrolysis of USCO into free fatty acids (FFAs) catalyzed by crude lipase extract from Candida rugosa (CRL). The resulting FFAs were recovered and utilized as the raw material for an esterification reaction with solketal, which was achieved via an open reaction. For this purpose, lipase Eversa® Transform 2.0 (ET2.0) was immobilized via physical adsorption on treated epicarp particles from Acrocomia aculeata (macauba), a lignocellulosic residue. A protein loading of 25.2 ± 1.3 mg g−1 with a support and immobilization yield of 64.8 ± 2.5% was achieved using an initial protein loading of 40 mg g−1 of support. The influence of certain parameters on the esterification reaction was evaluated using a central composite rotatable design (CCRD). Under optimal conditions, a FFAs conversion of 72.5 ± 0.8% was obtained after 150 min of reaction at 46 ◦C using a biocatalyst concentration of 20% wt. and a FFAs–solketal molar ratio of 1:1.6. The biocatalyst retained 70% of its original activity after ten esterification batches. This paper shows the conversion of two agro-industrial waste into valuable materials (enzyme immobilization support and solketal esters), The present study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)—Brazil—Finance Code 001. The authors are also thankful for the financial support of Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG)—Brazil (Process APQ-01691-21) and Ministerio de Ciencia e Innovación, and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.A.M. thanks the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) for the research fellowship (PQ-2 CA BI, Grant 306253/2023-2). J.M.J. and J.V.B.D. thank the FAPEMIG and CNPq Foundation for the student fellowships, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the Full Hydrolysis of Babassu Oil by Combi-Lipases

  • Santos, Rayan P. S.
  • Araujo, Lucas L.
  • Oliveira, Airton A.
  • Silva, Thamyres F. da
  • Rocha, Thales G.
  • Fernández-Lafuente, Roberto
  • Monteiro, Rodolpho R. C.
  • Vieira, R.S.
The concept of combi-lipases is herein explored in the full hydrolysis of babassu oil. The commercially immobilized lipases from Candida antarctica (form B) (Novozym® 435), Rhizomucor miehei (Lipozyme® RM-IM), and Thermomyces lanuginosus (Lipozyme® TL-IM) were evaluated as single and combined biocatalysts by a mixture design with triangular surface. As a result, after evaluating the response desirability profiling for all biocatalysts, the best biocatalyst in the reaction was the combi-lipases composed of 75% of Lipozyme® RM-IM, 17% of Novozym® 435, and 8% of Lipozyme® TL-IM, reaching full hydrolysis (>99%) after 4 h of reaction. Subsequently, such combi-lipases were employed as biocatalysts in the optimization of the reaction in a shorter reaction time (3 h). After optimization by the Taguchi method, full hydrolysis (>99%) was reached under optimized reaction conditions (9 wt.% of biocatalyst content, 1:2 (oil/water), 40 °C, and 180 rpm). Under such conditions, the combi-lipases maintained 70% of their initial activity after 10 reaction cycles. The antimicrobial activity against some of the most common environmental bacteria of the obtained free fatty acids (FFAs) was also evaluated. The FFAs inhibited more than 90% of the growth of S. aureus, E. coli, and P. aeruginosus when using 10 mg FFAs/mL., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). Airton A. Oliveira Jr thanks the Programa de Formação de Recursos Humanos—Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1—ANP/Finep). This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brazil (CAPES)—Finance Code 001., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review on the immobilization of bromelain

  • Tacias-Pascacio, Veymar G.
  • Castañeda-Valbuena, D.
  • Tavano, Olga Luisa
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Santiz Gómez, José Alfredo
  • Berenguer Murcia, A.
  • Fernández-Lafuente, Roberto
This review shows the endeavors performed to prepare immobilized formulations of bromelain extract, usually from pineapple, and their use in diverse applications. This extract has a potent proteolytic component that is based on thiol proteases, which differ depending on the location on the fruit. Stem and fruit are the areas where higher activity is found. The edible origin of this enzyme is one of the features that determines the applications of the immobilized bromelain to a more significant degree. The enzyme has been immobilized on a wide diversity of supports via different strategies (covalent bonds, ion exchange), and also forming ex novo solids (nanoflowers, CLEAs, trapping in alginate beads, etc.). The use of preexisting nanoparticles as immobilization supports is relevant, as this facilitates one of the main applications of the immobilized enzyme, in therapeutic applications (as wound dressing and healing components, antibacterial or anticancer, mucus mobility control, etc.). A curiosity is the immobilization of this enzyme on spores of probiotic microorganisms via adsorption, in order to have a perfect in vivo compatibility. Other outstanding applications of the immobilized enzyme are in the stabilization of wine versus haze during storage, mainly when immobilized on chitosan. Curiously, the immobilized bromelain has been scarcely applied in the production of bioactive peptides., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) and FEDER (PID2022-136535OB-I00). The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to DA (Grant No: 2023/01338-7). A.B.M. would like to thank the Generalitat Valenciana (PROMETEO Project CIPROM/2021/70) and the PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proteases immobilized on nanomaterials for biocatalytic, environmental and biomedical applications: Advantages and drawbacks

  • Bilal, Muhammad
  • Qamar, Sarmad Ahmad
  • Carballares, Diego
  • Berenguer-Murcia, Ángel
  • Fernández-Lafuente, Roberto
Proteases have gained significant scientific and industrial interest due to their unique biocatalytic characteristics and broad-spectrum applications in different industries. The development of robust nanobiocatalytic systems by attaching proteases onto various nanostructured materials as fascinating and novel nanocarriers has demonstrated exceptional biocatalytic performance, substantial stability, and ease of recyclability over multiple reaction cycles under different chemical and physical conditions. Proteases immobilized on nanocarriers may be much more resistant to denaturation caused by extreme temperatures or pH values, detergents, organic solvents, and other protein denaturants than free enzymes. Immobilized proteases may present a lower inhibition. The use of non-porous materials in the immobilization prevents diffusion and steric hindrances during the binding of the substrate to the active sites of enzymes compared to immobilization onto porous materials; when using very large or solid substrates, orientation of the enzyme must always be adequate. The advantages and problems of the immobilization of proteases on nanoparticles are discussed in this review. The continuous and batch reactor operations of nanocarrier-immobilized proteases have been successfully investigated for a variety of applications in the leather, detergent, biomedical, food, and pharmaceutical industries. Information about immobilized proteases on various nanocarriers and nanomaterials has been systematically compiled here. Furthermore, different industrial applications of immobilized proteases have also been highlighted in this review., The NOBELIUM JOINING GDANSK TECH RESEARCH COMMUNITY program is graciously acknowledged for supporting this work under the international collaboration project awarded to Muhammad Bilal (Grant number 44/2023/IDUB/I.1). We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing tailor-made steric matters to improve the immobilized ficin specificity for small versus large proteins

  • Siar, El Hocine
  • Abellanas-Pérez, Pedro
  • Morellon-Sterling, Roberto
  • Bolívar Bolívar, Juan Manuel
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
The development of strategies that can permit to adjust the size specificity of immobilized proteases by the generation of steric hindrances may enlarge its applicability. Using as a model ficin immobilized on glyoxyl agarose, two strategies were assayed to generate tailor made steric hindrances. First, ficin has been coimmobilized on supports coated with large proteins (hemoglobin or bovine serum albumin (BSA)). While coimmobilization of ficin with BSA presented no effect on the activity versus any of the assayed substrates, coimmobilization with hemoglobin permitted to improve the immobilized ficin specificity for casein versus hemoglobin, but still significant activity versus hemoglobin remained. Second, aldehyde-dextran has been employed to modify the immobilized ficin, trying to generate steric hindrances to avoid the entry of large proteins (hemoglobin) while enabling the entry of small ones (casein). This also increased the size specificity of ficin, but still did not suppress the activity versus hemoglobin. The combination of both strategies and the use of 37ºC during the proteolysis enabled to almost fully nullify the hydrolytic activity versus hemoglobin while preserving a high percentage of the activity versus casein. The modifications improved enzyme stability and the biocatalyst could be reused for 5 cycles without alteration of its properties., This research was funded by Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the activation strategy of nickel oxide-multi-walled carbon nanotubes on the immobilization of xylanase for synthesis of xylooligosaccharides

  • Varan, Nazli Ece
  • Yildirim, Deniz
  • Toprak, Ali
  • Fernández-Lafuente, Roberto
  • Alagöz, Dilek
Magnetic nickel oxide multi-walled carbon nanotubes (MWCNT-NiO) were employed in the immobilization of xylanase from Thermomyces lanuginosus, after modification with (3-glycidoxypropyl)trimethoxysilane or 3-aminopropyltriethoxysilane (APTES). The APTES-derivatized MWCNT-NiO particles were activated with glutaraldehyde to immobilize T. lanuginosus xylanase via covalent attachment. The (3-glycidoxypropyl)trimethoxysilane-derivatized MWCNT-NiO particles were directly used for the covalent immobilization of T. lanuginosus xylanase, or the formed epoxy groups were converted to aldehyde groups. The free xylanase had maximum activity at pH 7.5, whereas the immobilized samples showed an optimum pH of 7.0. The optimum temperature was 60°C for the xylanase samples. The thermal stability of xylanase increased at 7 and/or 12 folds after immobilization. The results of xylooligosaccharide synthesis showed that the main formed xylooligosaccharides were xylobiose, xylotriose, and xylotetraose for the immobilized xylanase samples. Furthermore, an effect of the enzyme loading could be found, an increase in this parameter promoted that xylobiose and xylotriose amounts slightly increased, whereas xylotetraose amount slightly decreased. The immobilized xylanase samples retained at least 80% of their initial activity after five reuses at pH 7.0 and 60°C. The results show that the new xylanase preparations were easily separable, thermally stable, and reusable in the synthesis of xylooligosaccharides., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of biocatalysts β-galactosidase loading in their performance in the kinetically controlled synthesis of lactulose

  • Gomes e Silva, Natan Câmara
  • Albuquerque, Tiago Lima de
  • Neto, Carlos Alberto Girão
  • Barros Gonçalves, Luciana Rocha
  • Ponte Rocha, Maria Valderez
  • Fernández-Lafuente, Roberto
β-galactosidase from Kluyveromyces lactis has been immobilized on chitosan-glutaraldehyde particles employing different enzyme loadings (in a range of 0.7–7 mg/g of support). The biocatalysts had been later utilized to produce lactulose by transglycosylation using milk whey supplemented with fructose. The amount of produced lactulose decreased when the enzyme loading increased, from around 18 mg/mL using the biocatalysts with only 0.7 mg/g to around 7 mg/mL using the biocatalyst with a loading of 7 mg/mL. The results showed in this paper shows the great effect of the substrates and product concentration gradients inside the biocatalyst particle, not only lactulose, but also glucose and galactose. That is, the use of a excessive enzyme loading can lead to a significant worsening of the β-galactosidase biocatalyst performance in kinetically controlled synthesis., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the specificity of ficin versus large hemoglobin and small casein by co-immobilizing inert proteins on the immobilized enzyme layer and further modification with aldehyde dextran

  • Siar, El Hocine
  • Abellanas-Pérez, Pedro
  • Rocha-Martin, Javier
  • Fernández-Lafuente, Roberto
Ficin has been immobilized at full loading on glyoxyl agarose beads. Then, ficin was blocked with 2,2′-dipyridyldisulfide. To be effective, the modification must be performed in the presence of 0.5 M urea, as the enzyme was not inhibited under standard conditions, very likely because the catalytic Cys was not fully exposed to the medium. Activity could be fully recovered by incubation with 1 M mercaptoethanol. This biocatalyst could hydrolyze hemoglobin and casein. The objective of this paper was to increase the enzyme specificity versus small proteins by generating steric hindrances to the access of large proteins. The step by step blocking via ionic exchange of the biocatalyst with aminated bovine serum albumin (BSA), aldehyde dextran and a second layer of aminated BSA produced a biocatalyst that maintained its activity versus small synthetic substrates, increased the biocatalyst stability, while reduced its activity to over 50 % versus casein. Interestingly, this treatment almost fully annulled the activity versus hemoglobin, more effectively at 37 °C than at 55 °C. The biocatalyst could be reused 5 times without changes in activity. The changes could be caused by steric hindrances, but it cannot be discarded some changes in enzyme sequence specificity caused by the modifications., This research was funded by the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eversa transform 2.0 immobilized on a hydrophobic support enables the solvent-free almost quantitative esterification of the free fatty acids from soybean oil with neopentylglycol

  • Monteiro, Rodolpho R. C.
  • Neta, Maria M.F. de Melo
  • Soares, Jorge B.
  • Lomonaco, Diego
  • Luna, F. Murilo T. de
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The performance of Eversa Transform 2.0 (ETL) and lipase from Thermomyces lanuginosus (TLL) was compared in the solvent-free esterification of the free fatty acids (FFAs) from soybean oil with neopentylglycol (NPG) to produce NPG-diesters, which may be used as biolubricants. Enzymes were immobilized by interfacial activation on an octadecyl-coated methacrylate macroporous resin (C18) and compared to commercially immobilized TLL (Lipozyme® TL IM), free ETL and TLL. ETL@C18 surpassed the performance of all tested biocatalysts, reaching up to 98 % of FFAs conversion after 6 h of reaction at 50 °C and using a biocatalyst content of 9 wt% (related to the mass of FFAs). After optimization, the reactor temperature had a higher influence on the production of the NPG-diesters than the biocatalyst content, so that 45 °C and 3 wt% were determined to be the optimal values. Under such conditions, ETL@C18 retained approximately 88 % of its initial conversion into the NPG-diesters even after 10 consecutive reaction cycles. The biolubricant is composed mainly of NPG-diesters (∼91 %) and unreacted NPG (∼9 %), as confirmed by NMR analysis. The NPG-diesters exhibited a higher viscosity index (from 190.84 to 215.86) and oxidative stability (from 0.10 h to 1.34 h) than the starting material. The NPG-diesters biolubricant also exhibited a lower friction coefficient (0.049 against 0.064) and wear scar diameter (139.03 μm against 151.43 μm) than the 20W-50 mineral lubricant., The Spanish government is gratefully recognized by the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación by the financial support to Roberto Fernandez-Lafuente (PID2022-136535OB-I00 and TED2021-131462B-I00). The Brazilian government is gratefully recognized by the Programa de Formação de Recursos Humanos from the Agência Nacional de Petróleo (PRH/ANP) by the doctoral scholarship to Rodolpho R. C. Monteiro., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights on the role of blocking agent on the properties of the lipase from Thermomyces lanuginosus immobilized on heterofunctional support for hydroesterification reactions

  • Miranda, Felipe Cardoso
  • Oliveira, Kaíque Souza G. C.
  • Tardioli, Paulo W.
  • Fernández-Lafuente, Roberto
  • Guimarães, José Renato
Here, we report a study of the effect of the blocking agent on the properties of the lipase from Thermomyces lanuginosus (TLL) immobilized on a heterofunctional support (Purolite C18-ethylnediamina (EDA)- vinyl sulfone (VS)-TLL-blocking agent) in different reactions. The performance of the biocatalysts was compared to those immobilized on standard hydrophobic support (Purolite C18-TLL) and the commercial one (TLL-IM). The nature of the blocking agent (Cys, Gly and Asp) altered the enzyme features. TLL-IM always gave a comparatively worse performance, with its specificity for the oil being very different to the Purolite biocatalysts. Under optimized conditions, Purolite C18-TLL yielded 97 % of hydrolysis conversion after 4 h using a water/waste cooking soybean oil (WCSO) mass ratio of 4.3, biocatalyst load of 6.5 wt% and a temperature of 44.2 °C (without buffer or emulsification agent). In esterification reactions of the purified free fatty acids (FFAs) obtained from WCSO, the best TLL biocatalysts depended on the utilized alcohol: linear amyl alcohol was preferred by Purolite C18-TLL and Purolite C18-EDA-VS-TLL-Gly, while higher activity was achieved utilizing isoamyl alcohol as nucleophile by Purolite C18-EDA-VS-TLL-Cys, Purolite C18-EDA-VS-TLL-Asp and IM-TLL as catalysts. All the results indicate the influence of the blocking step on the final biocatalyst features., This work was funded by Federal University of Itajubá (Edital 06/2023 - UNIVERSAL UNIFEI), São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 133204/2023-5), and Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government), with FEDER cofinancial support (project PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the performance of lipases in the full hydrolysis of residual coconut oil by immobilization on hydrophobic supports

  • Monteiro, Rodolpho R. C.
  • Luna, F. Murilo T. de
  • Lomonaco, Diego
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The effect of the immobilization via interfacial activation on hydrophobic supports of lipase A from Candida antarctica (CALA) and Eversa Transform 2.0 (ETL) in the hydrolysis of residual coconut oil is herein explored. Firstly, some important process parameters (biocatalyst content, substrates ratio, reactor temperature and stirring) were evaluated using the Taguchi method for both free biocatalysts. For free ETL, it was possible to reach full hydrolysis after 6 h under optimized reaction conditions (9 wt% of ETL, 1:2 (oil/water, w/w), 50 °C and 180 rpm). For free CALA, reaching full hydrolysis was not possible under the same optimized reaction conditions, even after 24 h of reaction. Then, ETL and CALA were immobilized by interfacial activation on a methacrylate macroporous resin particles containing octadecyl groups. After reaction conditions optimization by the Taguchi method, immobilized ETL (ETL@C18) reached full hydrolysis under the same optimized reaction conditions of free ETL, but in only 3 h. Immobilized CALA (CALA@C18), reached full hydrolysis (>99 %) after 24 hours under optimized reaction conditions which was not possible employing free CALA (56 %). Finally, under optimized reaction conditions, ETL@C18 retained 85 % of its initial activity after 10 consecutive hydrolysis cycles, whereas CALA@C18 retained less than 50 % of its initial activity after 5 consecutive hydrolysis cycles., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00 and TED2021–131462B-I00). Rodolpho R. C. Monteiro thanks Programa de Formação de Recursos Humanos – Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1 – ANP/Finep)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of a biolubricant by the enzymatic esterification of the free fatty acids from castor oil with neopentylglycol

  • Oliveira, Airton A.
  • Santos, Rayan P. S.
  • Rocha, Wesley S.
  • Luna, F. Murilo T. de
  • Fernández-Lafuente, Roberto
  • Monteiro, Rodolpho R. C.
  • Vieira, Rodrigo S.
The optimization of the esterification of the free fatty acids (FFAs) from castor oil with neopentylglycol (NPG) catalyzed by the commercially immobilized lipase from Thermomyces lanuginosus (Lipozyme® TL IM) is herein reported. An 95 ± 3.3 % acid consumption was achieved at 55 °C, 6 wt% biocatalyst content and a substrates molar ratio (acid/alcohol)) of 2:1 after 24 h of reaction in a solvent-free medium. The addition of 1 M heptane seemed to lead to biocatalyst inactivation. The final product was composed of over 85 % of diesters of NPG, 5 % of monoesters of NPG and 5 % estolides (estolide number of 7), together to 2 % of unreacted FFAs. This product improved the feedstock viscosity index from 87.15 to 119.21 and the oxidative stability from 0.18 h to 24 h. It also exhibited a lower friction coefficient (0.0518 against 0.0592) and a lower wear scar diameter (117.99 against 136.78) than the commercial lubricant 15 W-50. Lipozyme® TL IM retained approximately half of its initial FFAs conversion after eight consecutive reaction cycles of 24 h., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00 and TED2021-131462B-I00). Airton A. Oliveira Jr and Rodolpho R. C. Monteiro thank Programa de Formação de Recursos Humanos – Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1 – ANP/Finep)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Changes in ficin specificity by different substrate proteins promoted by enzyme immobilization

  • González Vasquez, Alex D.
  • Hocine, El Siar
  • Urzúa, Marcela
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
Ficin extract has been immobilized using different supports: glyoxyl and Aspartic/1,6 hexamethylenediamine (Asp/HA) agarose beads. The latter was later submitted to glutaraldehyde modification to get covalent immobilization. The activities of these 3 kinds of biocatalysts were compared utilizing 4 different substrates, casein, hemoglobin and bovine serum albumin and benzoyl-arginine-p-nitroanilide at pH 7 and 5. Using glyoxyl-agarose, the effect of enzyme-support reaction time on the activity versus the four substrates at both pH values was studied. Reaction time has been shown to distort the enzyme due to an increase in the number of covalent support-enzyme bonds. Surprisingly, for all the substrates and conditions the prolongation of the enzyme-support reaction did not imply a decrease in enzyme activity. Using the Asp/HA supports (with different amount of HA) differences in the effect on enzyme activity versus the different substrates are much more significant, while with some substrates the immobilization produced a decrease in enzyme activity, with in other cases the activity increased. These different effects are even increased after glutaraldehyde treatment. That way, the conformational changes induced by the biocatalyst immobilization or the chemical modification fully altered the enzyme protein specificity. This may also have some implications when following enzyme inactivation., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00)., FONDECYT Project N° 1231631(MU), Beca Doctorado Nacional N° 21212403 Agencia Nacional de Investigación y Desarrollo (ANID)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of papain at extreme pHs and temperatures by its immobilization on cellulose nanocrystals coated with polydopamine

  • Rashidi, Zohreh
  • Homaei, Ahmad
  • Fernández-Lafuente, Roberto
In this investigation, a nano-support containing cellulose nanocrystals – polydopamine (CP) was functionalized with glutaraldehyde (G) and utilized to immobilize papain. The properties of the supports and stabilized enzyme were characterized by TEM, SEM, DLS, Zeta-potential, FTIR, and EDS analyses. The optimal temperature of both papain forms was 60 °C, while the optimal pH value of the stabilized papain shifted from 7 to 8 after immobilization. The immobilized enzyme preparations showed higher stability at 80 and 90 °C and under acidic and alkaline conditions compared to the free enzyme. CPG-papain stability was higher than that of CP-papain. The Km values for free and immobilized papain on CP and CPG were 3.92, 3, and 2.74 mM respectively. Kcat values were 9.05, 15.18, and 11.59 min−1 and catalytic efficiency values were 2.3, 5.05, and 4.23 mM−1.min−1. Additionally, the potential advantages of using a silver nanohydrid support were assessed. Although silver nanoparticles conveyed some catalytic activity to the final biocatalysts, they also caused a decrease in stability and activity of the immobilized papain. Therefore, the non-hybrid supports CP and CPG were more suitable candidates for the immobilization of papain than the hybrid supports., This research was financially supported by Hormozgan Science and Technology Park. RFL gratefully recognize the support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022–136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing mixed cationic/anionic supports to covalently immobilize/stabilize enzymes with high isoelectric point by enzyme adsorption and support-enzyme glutaraldehyde crosslinking

  • González Vasquez, Alex D.
  • Hocine, El Siar
  • Alcántara, Andrés R.
  • Urzúa, Marcela
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
Ficin fully immobilized on Asp-agarose beads at pH 7 but not on an aminated support. This made enzyme adsorption plus glutaraldehyde modification non-viable for this enzyme. Modifying glyoxyl-agarose beads with mixtures of Asp and 1,6-hexamethylenediamine (HA) at different ratios, mixed anion/cation exchanger supports were built. Only if HA greatly exceed Asp in the support, immobilization did not work. While only using the Asp-agarose support immobilized enzyme molecules were only ionically adsorbed after glutaraldehyde treatment (visualized in SDS-PAGE analysis), the mixed supports gave covalent immobilization. The glutaraldehyde modification of these biocatalysts permitted to establish covalent bonds with the support, and this was more effective when using higher amounts of HA in the support. When around 60 % of the groups in the support were HA, the treatment with glutaraldehyde fully suppressed enzyme release from the support after boiling in SDS. The glutaraldehyde treated biocatalysts were more stable than just the adsorbed enzymes or the enzyme adsorbed only on Asp supports and then treated with glutaraldehyde (the optimal biocatalyst retained 90 % of the initial activity while the just adsorbed ficin retained 50 % of the initial activity). This strategy can be utilized to immobilize other proteins with high isoelectric points following this immobilization strategy., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00) and FONDECYT (Project N° 1231631(MU), A.D.G-V gratefully recognize a “Beca Doctorado Nacional) (N° 21212403) and Agencia Nacional de Investigación y Desarrollo ANID by funding this research stay., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Cross-Linked Aggregates of Peroxidase from Megathyrsus maximus (Guinea Grass) and Their Application for Indigo Carmine Decolorization

  • Pérez, Angie V.
  • Gaitán Oyola, Jorge A.
  • Vargas Delgadillo, Diana P.
  • Castillo, John J.
  • Barbosa, Oveimar
  • Fernández-Lafuente, Roberto
We present the synthesis of a cross-linking enzyme aggregate (CLEAS) of a peroxidase from Megathyrsus maximus (Guinea Grass) (GGP). The biocatalyst was produced using 50%v/v ethanol and 0.88%w/v glutaraldehyde for 1 h under stirring. The immobilization yield was 93.74% and the specific activity was 36.75 U mg-1. The biocatalyst surpassed by 61% the free enzyme activity at the optimal pH value (pH 6 for both preparations), becoming this increase in activity almost 10-fold at pH 9. GGP-CLEAS exhibited a higher thermal stability (2-4 folds) and was more stable towards hydrogen peroxide than the free enzyme (2-3 folds). GGP-CLEAS removes over 80% of 0.05 mM indigo carmine at pH 5, in the presence of 0.55 mM H2O2 after 60 min of reaction, a much higher value than when using the free enzyme. The operational stability showed a decrease of enzyme activity (over 60% in 4 cycles), very likely related to suicide inhibition., This research was funded by Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government), project number PID2022-136535OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning almond lipase features by the buffer used during immobilization: The apparent biocatalysts stability depends on the immobilization and inactivation buffers and the substrate utilized

  • Cherni, Oumaima
  • Carballares, Diego
  • Siar, El Hocine
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Moraes Polizeli, Maria de Lourdes Teixeira de
  • Rocha-Martín, Javier
  • Bahri, Sellema
  • Fernández-Lafuente, Roberto
The lipase from Prunus dulcis almonds was inactivated under different conditions. At pH 5 and 9, enzyme stability remained similar under the different studied buffers. However, when the inactivation was performed at pH 7, there were some clear differences on enzyme stability depending on the buffer used. The enzyme was more stable in Gly than when Tris was employed for inactivation. Then, the enzyme was immobilized on methacrylate beads coated with octadecyl groups at pH 7 in the presence of Gly, Tris, phosphate and HEPES. Its activity was assayed versus triacetin and S-methyl mandelate. The biocatalyst prepared in phosphate was more active versus S-methyl mandelate, while the other ones were more active versus triacetin. The immobilized enzyme stability at pH 7 depends on the buffer used for enzyme immobilization. The buffer used in the inactivation and the substrate used determined the activity. For example, glycine was the buffer that promoted the lowest or the highest stabilities depending on the substrate used to quantify the activities., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). Oumaima Cherni thanks the Tunisian Ministry of Higher Education and Scientific Research for her fellowship to perform her stay at ICP-CSIC. The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to DA (Grant No: 2023/01338-7)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption features of reduced aminated supports modified with glutaraldehyde: Understanding the heterofunctional features of these supports

  • De Andrades, Diandra
  • Abellanas-Pérez, Pedro
  • Carballares, Diego
  • Alcántara, Andrés R.
  • Polizeli, Maria de Lourdes T. M.
  • Rocha-Martin, Javier
  • Fernández-Lafuente, Roberto
Immobilization of enzymes on aminated supports using the glutaraldehyde chemistry may involve three different interactions, cationic, hydrophobic, and covalent interactions. To try to understand the impact this heterofunctionality, we study the physical adsorption of the beta-galactosidase from Aspergillus niger, on aminated supports (MANAE) and aminated supports with one (MANAE-GLU) or two molecules of glutaraldehyde (MANAE-GLU-GLU). To eliminate the chemical reactivity of the glutaraldehyde, the supports were reduced using sodium borohydride. After enzyme adsorption, the release of the enzyme from the supports using different NaCl concentrations, Triton X100, ionic detergents (SDS and CTAB), or different temperatures (4 °C to 55 °C) was studied. Using MANAE support, at 0.3 M NaCl almost all the immobilized enzyme was released. Using MANAE-GLU, 0.3 M, and 0.6 M NaCl similar results were obtained. However, incubation at 1 M or 2 M NaCl, many enzyme molecules were not released from the support. For the MANAE-GLU-GLU support, none of the tested concentrations of NaCl was sufficient to release all enzyme bound to the support. Only using high temperatures, 0.6 M NaCl, and 1 % CTAB or SDS, could the totality of the proteins be released from the support. The results shown in this paper confirm the heterofunctional character of aminated supports modified with glutaraldehyde., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). DC is holding a FPI fellowship. The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to DA (Grant No: 2023/01338-7). The help and suggestions from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reutilization of the Most Stable Coimmobilized Enzyme Using Glutaraldehyde Chemistry to Produce a New Combi-biocatalyst When the Coimmobilized Enzyme with a Lower Stability Is Inactivated

  • Carballares, Diego
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Polizeli, Maria de Lourdes T. M.
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
In the present article, glutaraldehyde was used to covalently coimmobilize the lipase Eversa Transform 2.0 and the β-galactosidase from Aspergillus oryzae. Both enzymes were adsorbed on amino supports and modified with glutaraldehyde. However, the first enzyme remained almost fully active under stress conditions, while the β-galactosidase lost a large percentage of its activity. To prevent the necessity of discarding both enzymes, the lipase was covalently immobilized following this immobilization strategy. The biocatalyst was reduced to eliminate its chemical reactivity, and the β-galactosidase was then coimmobilized via ion exchange. The incubation at high concentrations of salt desorbed the β-galactosidase from the support. This combi-biocatalyst was used in three inactivation/rebuilding cycles where the inactivated β-galactosidase was liberated from the combi-biocatalyst by washing at high ionic strength and replaced with a fresh enzyme, while the immobilized lipase maintained its activity throughout the 3 cycles. That way, it was possible to use this strategy to reuse the immobilized Eversa Transform 2.0 to build new combi-biocatalysts after β-galactosidase inactivation., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00 and CNS2022-135135). D.C. holds a FPI fellowship from this project. The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to D.A. (grant no.: 2023/01338-7)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A hydroesterification reaction system to produce octyl esters using degummed soybean oil as substrate: Combining reusable free and immobilized lipases

  • Guimarães, José R.
  • Miranda, Letícia Passos
  • Camargo Bento, Renato Franco de
  • Fernández-Lafuente, Roberto
  • Tardioli, Paulo W.
This study shows the enzymatic synthesis of octyl alcohol-based biolubricants carried out in two catalytic steps: degummed soybean oil (DSO) hydrolysis and esterification of the produced and purified free fatty acids (FFA). Several lipases were evaluated as catalysts in the hydrolysis of DSO. Under optimal conditions, lipase from Pseudomonas fluorescens (PFL) yielded 97 % conversion after 23 h using 50 U/g oil and DSO:water mass ratio of 1:0.5. Sequential batch strategies have been developed for the recovery and reuse of free enzyme in further hydrolysis cycles. When hexane was used in the separation between the FFA-rich phase and the phase composed of water, enzyme and glycerol, there was better PFL recovery and FFA-conversion of 65 % was still achieved after five 24-hour hydrolytic cycles. In the esterification step, the potential of four lipases (commercial Lipozym-435, and lipase B from Candida antarctica (CALB), lipase from porcine pancreas (PPL) and Eversa® Transform 2.0 (EV) immobilized on Purolite Lifetech EC8806F) were evaluated in the production of octyl esters in a solvent-free medium (FFA/octanol molar ratio of 1:2.5) using screw-capped glass bottles as reactor. The immobilized EV gave the best ester yield (∼87 wt%). When EV-Purolite was used in a vortex flow reactor, a yield of around 94 wt% was reached after 3 h of reaction using a biocatalyst load of 1 % (w/v) and FFA/octanol molar ratio of 1:2.5. The immobilized lipase could be reused for five consecutive 3 h-batches of esterification, maintaining the octyl esters yield of the first batch., This work was funded by Federal University of Itajubá (Edital 06/2023 - UNIVERSAL UNIFEI), São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 308212/2017-7), and Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the activation of agarose beads with divinyl sulfone for enzyme immobilization and stabilization

  • Abellanas-Pérez, Pedro
  • de Andrades, Diandra
  • Alcántara, Andrés R
  • Polizeli, Maria de Lourdes Teixeira de Moraes
  • Rocha-Martin, Javier
  • Fernandez-Lafuente, Roberto
The focus of the present work is to find the optimal conditions for the activation of agarose beads with divinyl sulfone (DVS). The reactivity of the vinyl sulfone groups in the support was checked by the support capacity to react with ethylamine; via elemental analysis. In addition, trypsin was used as a model enzyme to test the immobilization and stabilization capabilities of the different supports. The higher the pH, the more vinyl sulfone groups are incorporated into the support, but lower reactivity versus ethylamine is observed. Too long activation times led to similar results. A N/S ratio of 1 means that all vinyl sulfone groups were reactive, and it was always lower than tis figure. The N in the support was 50 % of the amount observed for glyoxyl supports activated with ethylenediamine, suggesting the VS polymerization may be a likely explanation for this result. The higher N/S ratio in the support (modified with ethylamine), the higher the obtained stabilization, very likely by the lower polymerization of the vinyl sulfone on the support. We propose 360 mM divinyl sulfone, at pH 11.5 and 2 h as optimal conditions to reach the highest enzyme stabilization by immobilization in this support., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to DA (Grant No: 2023/01338-7). JR-M recognizes the support from Grant CNS2022-135135 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR and Grant PID2022-139209OB-C22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic production of xylose esters using degummed soybean oil fatty acids following a hydroesterification strategy

  • Miranda, Felipe Cardoso
  • Gonçalves Cordeiro Oliveira, Kaíque Souza
  • Tardioli, Paulo W.
  • Fernández-Lafuente, Roberto
  • Guimarães, José R.
The enzymatic synthesis of xylose fatty acid esters was carried out in two steps: hydrolysis of degummed soybean oil (DSO) and esterification of the produced and purified free fatty acids (FFA) with xylose. Different lipases immobilized on a hydrophobic support were evaluated in the hydrolysis of DSO and an experimental design was used to optimize the reaction. Eversa® Transform 2.0 (EV-Purolite) yielded 93% conversion after 6 h using biocatalyst load of 6.53 wt%, water/oil mass ratio of 5.5 and temperature of 48.4 °C. High operational stability for EV-Purolite was found using a sequential batch strategy and the possibility of concentrating glycerol. In the esterification stage, lipase from Thermomyces lanuginosus (TLL-Purolite) and lipase B from Candida antarctica showed better performance than lipase from porcine pancreas and EV-Purolite. About 17% of FFAs (0.85 molecules of FAA per xylose molecule) was consumed using an enzyme load of 5 wt% of TLL-Purolite and FFA/xylose molar ratio of 5. Sequential esterification batches showed low operational stability of TTL-Purolite due to the desorption of TLL from the support. The final mixture of the reaction medium containing xylose fatty acid esters showed emulsifying properties similar to those of commercial surfactant., This work was funded by Federal University of Itajubá (Edital 06/2023 - UNIVERSAL UNIFEI), São Paulo Research Foundation (FAPESP, grant number 2016/10636-8), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES, Finance Code 001), Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, project numbers 405889/2016-0 and 133204/2023-5), and Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022-136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the enzymatic production of biolubricants by the Taguchi method: Esterification of the free fatty acids from castor oil with 2-ethyl-1-hexanol catalyzed by Eversa Transform 2.0

  • Monteiro, Rodolpho R. C.
  • Neta, Maria M.F. de Melo
  • Rocha, Wesley S.
  • Soares, Jorge B.
  • Luna, F. Murilo T. de
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The solvent-free esterification of the free fatty acids (FFAs) obtained by the hydrolysis of castor oil (a non-edible vegetable oil) with 2-ethyl-1-hexanol (a branched fatty alcohol) was catalyzed by different free lipases. Eversa Transform 2.0 (ETL) features surpassed most commercial lipases. Some process parameters were optimized by the Taguchi method (L16'). As a result, a conversion over 95% of the FFAs of castor oil into esters with lubricants properties was achieved under optimized reaction conditions (15 wt% of biocatalyst content, 1:4 molar ratio (FFAs/alcohol), 30 °C, 180 rpm, 96 h). The substrates molar ratio had the highest influence on the dependent variable (conversion at 24 h). FFAs/2-ethyl-1-hexanol esters were characterized regarding the physicochemical and tribological properties. Interestingly, the modification of the FFAs with 2-ethyl-1-hexanol by ETL increased the oxidative stability of the FFAs feedstock from 0.18 h to 16.83 h. The biolubricants presented a lower friction coefficient than the reference commercial mineral lubricant (0.052 ± 0.07 against 0.078 ± 0.04). Under these conditions, ETL catalyzed the oligomerization of ricinoleic acid (a hydroxyl fatty acid) into estolides, reaching a conversion of 25.15% of the initial FFAs (for the first time)., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00 and TED2021-131462B-I00). Rodolpho R. C. Monteiro thanks Programa de Formação de Recursos Humanos – Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1 – ANP/Finep)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilized Lipases in the Synthesis of Short-Chain Esters: An Overview of Constraints and Perspectives

  • Sousa, Ronaldo Rodrigues de
  • Santos, Michelle M. dos
  • Medeiros, Matheus W. R.
  • Manoel, Evelin A.
  • Berenguer Murcia, A.
  • Freire, Denise Maria Guimarães
  • Fernández-Lafuente, Roberto
  • Ferreira-Leitão, Viridiana Santana
Biocatalysis—specifically the use of immobilized lipases—has been proposed as a greener alternative for ester production. Several critical challenges, such as the high cost of biocatalysts, are delaying the industrial implementation of biocatalysis. Moreover, for short-chain ester synthesis, the strong inhibition/inactivation potential of short-chain acids and alcohols on lipases leads to long reaction cycles and/or the need to use organic solvents to overcome the limitations of solvent-free systems and, consequently, the decrease in product concentrations. This review presents an overview of the scientific developments in enzymatic short-chain ester synthesis, compiling the constraints on their syntheses from a process perspective, including insights about key performance indicators (KPI) and economic parameters., We gratefully recognize the financial support from Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro—FAPERJ (APQ1 E26/211.736/2021 and IT Grant E-26/260.418/2022), Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support and PID2021-123079OB-I00 project funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Díaz Carretero, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability., The authors acknowledge the grant PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, EU and to the PID2022-136535OB-100 grant; to the CSIC for the COOPA20271, COOPB22002, and COOPB24072 grants, as well as research grants (HURG-2016-03-02 and HURG-2020-03-02-75) received from Ministry of Education through office of the Research and Extension, Haramaya University. AM acknowledges the Spanish Ministry of Science (RYC2018-024561-I and to the European Union NextGeneration EU/PTR; CNS2023-144346), the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and the support by Aragon Government ( E13_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Aqueous Enzymatic Extraction for Obtaining Oil from Thevetia peruviana Seeds

  • Domínguez Pérez, Luis
  • Castañeda-Valbuena, D.
  • Rosales Quintero, Arnulfo
  • Santiz Gómez, José Alfredo
  • Zimmermann, Vinicius
  • Virgen-Ortíz, José J.
  • Galindo Ramírez, Sergio
  • Fernández-Lafuente, Roberto
  • Rodrigues, Rafael C.
  • Tacias-Pascacio, Veymar G.
The aqueous enzymatic extraction (AEE) of oil from Thevetia peruviana seeds was studied. The oil extraction yields obtained by treatment with cellulase, Alcalase, and Viscozyme L were compared, finding that the treatment with Alcalase at pH 6 and 50 °C gave the highest yield (63.07%), so it was selected for the optimization of the oil extraction process through a central composite design and a response surface methodology. An oil extraction yield of 78.22% was achieved under the optimum conditions (2% of Alcalase, 4 h of incubation, 250 rpm, and a solid-to-liquid ratio of 1:4.5). The predominant fatty acids in the oil obtained by both AEE and standard solvent extraction (SE) were oleic, linoleic, stearic, and palmitic acids. However, AEE produced an oil presenting lower acidity and peroxide values and greater oxidative stability, indicating that this method produces an oil with better quality. Scanning electron microscopy images of Thevetia peruviana seeds showed a structural alteration of their cell wall caused by AEE, which allowed the release of oil from this seed in the aqueous medium. The results suggest that AEE could be an excellent alternative in terms of efficiency, oil quality, and environmental friendliness for the extraction of this oil., Tacias-Pascacio and Castañeda-Valbuena give thanks for the financial support from “Instituto de Ciencia, Tecnología e Innovación” from the government of Chiapas, Mexico. Fernandez-Lafuente wants to thank the support from the Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). The authors gratefully recognize the Universidad Politécnica de Chiapas for the technical support in the scanning electron micrograph analysis. The help and suggestions from Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) during the writing of this paper and the support of the engineers Ilse Vázquez-Camas and Dilan Hernández-Miguel (Tecnológico Nacional de México/Instituto Tecnológico de Tuxtla Gutiérrez) in the experimental part of the project are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A comprehensive review of lipase-catalyzed acidolysis as a method for producing structured glycerides

  • Tacias-Pascacio, Veymar G.
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Tavano, Olga Luisa
  • Mendes, Adriano A.
  • Berenguer Murcia, A.
  • Fernández-Lafuente, Roberto
The production of structured lipids is a current trend in food technology in order to enhance the properties of fats and oils. Lipases have been utilized in many instances for this purpose, in most examples in an immobilized form. In this review, after discussing the different strategies to produce artificial lipids using lipases (esterification, transesterification, interesterification), we have focused on acidolysis. The reaction commences with hydrolysis at one position of the triglyceride molecule and is followed by the esterification between the released hydroxyl group and the target fatty acid (although other carboxylic acids can be used, such as phenolic acid derivatives). This means that water plays a double role, as substrate in the first step and as an undesired by-product in the second one. Therefore, the control of water activity becomes critical in these reactions. This review discusses the advantages, possibilities and drawbacks of this strategy to produce tailor-made designed lipids, summarizing many of the papers related to this strategy. The summarized results show the complexity of this reaction that can make the understanding and reproducibility of the reactions complex if there are no strict controls of all parameters determining the final yields., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00), CNPq (Grants 307809/2020-0, 306253/2023-2, 405418/2021-3) and FAPERGS (grants 21/2551-0002270-1, 22/2551-0000397-4). A.B.M. thanks the Generalitat Valenciana (CIPROM/2021/70) for financial support. We thank Novozymes, and specially R. Martinez, by the kind donation of enzymes. This communication is part of the R + D + i project PID2021-123079OB-I00 funded by MCIN/ AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laccase-based biocatalytic systems application in sustainable degradation of pharmaceutically active contaminants

  • Singh, Anil Kumar
  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Cornet, Iris
  • Fernández-Lafuente, Roberto
  • Bilal, Muhammad
[Data availability] No data were used for the research described in the article., The outflow of pharmaceutically active chemicals (PhACs) exerts a negative impact on biological systems even at extremely low concentrations. For instance, enormous threats to human and aquatic species have resulted from the widespread use of antibiotics in ecosystems, which stimulate the emergence and formation of antibiotic-resistant bacterial species and associated genes. Additionally, it is challenging to eliminate these PhACs by employing conventional physicochemical water treatment techniques. Enzymatic approaches, including laccase, have been identified as a promising alternative to eliminate a broad array of PhACs from water matrices. However, their application in environmental bioremediation is hindered by several factors, including the enzyme's stability and its location in the aqueous environment. Such obstacles may be surmounted by employing laccase immobilization, which enables enhanced stability (including inactivation caused by the substrate), and thus improved catalysis. This review emphasizes the potential hazards of PhACs to aquatic organisms within the detection concentration range of ngL−1 to µgL−1, as well as the deployment of laccase-based multifunctional biocatalytic systems for the environmentally friendly mitigation of anticancer drugs, analgesics/NSAIDs, antibiotics, antiepileptic agents, and beta blockers as micropollutants. This approach could reduce the underlying toxicological consequences. In addition, current developments, potential applications, and viewpoints have focused on computer-assisted investigations of laccase-PhACs binding at enzyme cavities and degradability prediction., The financial support from the National Science Centre, Poland under the Research Grant number UMO-2023/49/B/ST8/02271 is graciously acknowledged. RFL thanks Misterio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (project PID2022–136535OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vinyl sulfone-amino-alkyl supports: heterofunctional matrixes to prevent enzyme release and stabilize lipases via covalent immobilization

  • Abellanas-Pérez, Pedro
  • Andrades, Diandra de
  • Alcántara, Andrés R.
  • Rocha-Martín, Javier
  • Polizeli, Maria de Lourdes T. M.
  • Fernández-Lafuente, Roberto
New trifunctional supports were prepared (amino-octyl-vinyl sulfone (VS)- and amino-hexyl-VS-agarose) and compared to octyl-VS-agarose. They were utilized to immobilize the lipases A and B from Candida antarctica (CALA and CALB). After incubation to generate some enzyme-support bonds and blocking with different nucleophiles, SDS-PAGE analyses showed that all enzyme molecules become covalently immobilized on the support. In all VS biocatalysts, the blocking reagent presented a great effect in the properties of enzymes. The best blocking agents promoted a significant enzyme stabilization compared to the enzyme stability using the amino-alkyl-agarose supports, higher than that using octyl-VS-agarose supports, although these remained the most stable ones in most cases, as the octyl-biocatalysts were significantly more stable than the enzyme immobilized on amino-alkyl-support. Enzyme activities and specificities could be also greatly tuned by the immobilization in the new trifunctional supports, with enzyme activities in many instances enhancing that of the best non-covalently immobilized enzyme. That way, the results on this paper show that the properties of the enzymes when immobilized on these new trifunctional supports may be significantly tuned by the nature of the acyl chain in the support and the nature of the reagent used to block the reactivity of the remaining VS groups. acyl chain in the support and the nature of the reagent used to block the reactivity of the remaining VS groups., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). JR-M recognize the support from Grant CNS2022-135135 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR and Grant PID2022-139209OB-C22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU. The authors gratefully acknowledge FAPESP (São Paulo Research Foundation) by research scholarship to DA (Grant No: 2020/15510-8 and 2023/01338-7). The help and suggestions from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme loading in the support and medium composition during immobilization alter activity, specificity and stability of octyl agarose-immobilized Eversa Transform

  • Sabi, Guilherme J.
  • de Souza, Leonardo
  • Abellanas-Pérez, Pedro
  • Tardioli, Paulo W.
  • Mendes, Adriano A.
  • Rocha-Martín, Javier
  • Fernández-Lafuente, Roberto
Eversa Transform (ETL) was immobilized on octyl agarose beads at two different enzymes loadings (1 mg/g and 15 mg/g) under 18 different conditions, including different pH values, buffers, additives (different solvents, Ca2+, NaCl). Their activity was analyzed at pH 5 and 7 with p-nitrophenyl butyrate and at pH 5 with triacetin, determining also its stability at pH 5 and 7 (in different media). Ca2+ stabilized ETL biocatalysts while phosphate destabilized them. The overloaded biocatalysts were generally less stable and with a lower specific activity than the lowly loaded biocatalyst. Results show that enzyme activity (even by a 3 fold factor) and stability of the immobilized enzyme may be tailored by controlling the immobilization conditions, but the effects of the immobilization conditions on activity depend on the substrate and conditions of activity determination, the effects on stability depend on the inactivation conditions. Moreover, the enzyme loading of the biocatalysts defines the effects of the immobilization conditions, and there are clear interactions between immobilization conditions (e.g., immobilization pH determines the effect of the presence of NaCl). These suggest that the extrapolation of the results obtained with one substrate under one condition to other conditions can lead to wrong decisions., RF-L gratefully recognizes the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). AAM recognizes the support from CNPq (project 306253/2023-2). Guilherme J. Sabi and Leonardo de Sousa gratefully recognice Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES, Finance Code 001; CAPES-PRINT Process Numbers 88887.936648/2024-00; CAPES-PDSE Process Numbers 88881.933605/2024-01) for supporting the stay at ICP-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alcalase immobilization in iota-carrageenan-matrix hydrogel beads derived from the macroalga Solieria filiformis

  • D’Almeida, Alan Portal
  • Gonçalves, Luciana Rocha Barros
  • Albuquerque, Tiago L.
  • Fernández-Lafuente, Roberto
  • Silva, Ivanildo José
This study aims to immobilize Bacillus licheniformis (Alcalase) protease in iota-carrageenan (ιCAR) matrix hydrogels via adsorption. CAR was extracted from macroalgae Solieria filiformis and used to produce hydrogels using Al3 + as the gelling agent. Subsequently, enzyme immobilization was performed at 25ºC, for 120 min using particles of ∼2.0 mm diameter, varying the medium pH values (7.0, 8.0, and 9.0). The immobilization at pH 8.0 resulted in the biocatalyst with the highest immobilization yield (100 %), expressed activity (88.9 %), and mass activity (10.4 U/g) for 1.0 mg/g of enzyme loading. When using particles with different diameters (1.0, 2.0, and 3.0 mm), the best results were obtained using 1.0 mm particles. This permitted a 100 % immobilization yield, 95.8 % expressed activity, and high mass activity (11.2 U/g). The lyophilized biocatalyst presented varying macro-pore diameters, ranging from 21 to 126 µm. The immobilized biocatalyst was 11 times more stable than the soluble enzyme at 60ºC and pH 8.0 and presented > 80 % retained activity in the pH range 6.0–9.0., This work was supported by Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico (FUNCAP), by granted scholarship and funding (Process nº PS1–0186–00043.01.00/21); Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) (Grant nº. 440639/2022–0/2022–9). The authors would also like thank the Algae Producers Association of Flecheiras and Guajiru cities for the algae supply, the Grupo de Pesquisa em Termofluidodinâmica Aplicada (GPTA), and Central Analítica UFC/CT-INFRA/MCTI-SISANO/Pró-Equipamentos CAPES for the support. RFL wants to thank the support from ministerio de ciencia, innovacion y universidades and Agência Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00). Molecular graphics of the Alcalase enzyme were produced using UCSF ChimeraX 1.8., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-driven electron localization and defect heterogeneity in ceria

  • Zhang, Xingfan
  • Zhou, Yi
  • Mayoral, Álvaro
  • Terasaki, Osamu
  • Catlow, C. Richard A.
  • Sokol, Alexey A.
et al., The exceptional performance of ceria (CeO2) in catalysis and energy conversion is fundamentally governed by its defect chemistry, particularly oxygen vacancies. The formation of each oxygen vacancy (VO••) is assumed to be compensated by two localized electrons on cations (Ce3+). Here, we show by combining theory with experiment that while this 1 VO••: 2Ce3+ ratio accounts for the global charge compensation, it does not apply at the local scale, particularly in nanoparticles. Hybrid quantum mechanical/molecular mechanical (QM/MM) defect calculations, together with synchrotron X-ray photoelectron spectroscopy (XPS) measurements, show that electrons have a strong preference to localize and segregate on surfaces, which can overcome the trapping force from the VO•• sites in the bulk. At a given Fermi level, the surface VO•• tends to trap more electrons than those in bulk, resulting in a higher Ce3+ to VO•• ratio on surfaces than that in the bulk, driven by the preferential localization of electrons and enhanced VO••–Ce3+coupling. Large-scale unbiased Monte Carlo simulations on ceria nanoparticles confirmed this trend and further show that the surface segregation of electrons is more pronounced at low reduction levels and in smaller nanoparticles. In highly reduced ceria nanoparticles, however, the enhanced repulsive interactions lead to a less significant extent of defect heterogeneity or even reverse the location preference of defects in some nanoparticles. Our findings underscore the need to consider both the overall nonstoichiometry and local defect behavior in easily reducible oxides, with direct relevance to their performance in catalytic and energy applications., The authors acknowledge the use of the THOMAS, YOUNG, and ARCHER2 UK National Supercomputing Service (http://www.archer2.ac.uk) via membership of the UK’s HEC Materials Chemistry Consortium, which is funded by EPSRC (Grant Nos. EP/P020194, EP/T022213, and EP/R029431). We also acknowledge funding provided by EPSRC under Grant Nos. EP/W014580, EP/W014378, EP/R001847, EP/K038419, and EP/I030662. Experimental parts were supported by grants from the Japan Society for the Promotion of Science (JSPS), KAKENHI (grant nos. JP 21H05010 and JP 21KK0085). The experiment at SPring-8 BL07LSU was carried out as joint research in the Synchrotron Radiation Research Organization and the Institute for Solid State Physics, The University of Tokyo (Proposal No. 2021B7401). STEM experiment was supported by the Centre for High-Resolution Electron Microscopy (CℏEM), ShanghaiTech University (EM02161943), and Shanghai Key Laboratory of High-resolution Electron Microscopy. J.B. and T.L. acknowledge the Royal Society International Exchanges 2023 programme for funding. A.M. acknowledges the Spanish Ministry of Science MICIU/AEI/10.13039/501100011033 (RYC2018-024561-I; CEX2023-001286-S, EU NextGenerationEU/PRTR: CNS2023-144346 and PID 2022136535OB-I00) and the Regional Government of Aragon (E13_23R)., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Spirulina Extract Enhances the Vasodilation in Aorta and Mesenteric Arteries of Aged Rats

  • Majewski, Michal S.
  • Klett-Mingo, Mercedes
  • Verdasco-Martín, Carlos M.
  • Otero Hernández, Cristina
  • Ferrer, Mercedes
Aging, one of the main factors associated with cardiovascular diseases, induces vascular modifications through nitric oxide (NO) release and oxidative stress. Based on the antioxidant properties of the non-enzymatic spirulina extract (non-Enz-Spir-E) and that degrading enzymes enhances the extract bioactivity, the aim of this study was to analyze the in vitro effect of an Alcalase-assisted Enz-Spir-E on the vasodilator function of conduit and resistance arteries (which differently contribute to blood pressure regulation) in aging. Therefore, thoracic aorta (TA) and mesenteric arteries (MA) from male Sprague–Dawley rats (20–22 months-old) were divided into two groups: non-incubated vessels and vessels exposed to Enz-Spir-E (0.1% w/v) for 3 h. The vasodilation to acetylcholine (ACh), sodium nitroprusside (SNP, a NO donor), carbon-monoxide-releasing molecule (CORM), and cromakalim (a potassium channel opener), as well as NO and superoxide anion production, were studied. Enz-Spir-E increased the ACh-, SNP-, and CORM-induced responses in both types of arteries, while the cromalakim-induced relaxation was increased only in MA. Enz-Spir-E increased NO release (TA: 5.69-fold; MA: 1.79-fold), while it reduced superoxide anion formation (TA: 0.52-fold; MA: 0.66-fold). These results indicate that Enz-Spir-E improves aging-associated vasodilation through increasing NO release/bioavailability in both types of arteries and hyperpolarizing mechanisms only in MA., This research was funded by the Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III (PI19/01282) and Fondo Europeo de Desarrollo Regional to MF and the Agencia Estatal de Investigación del Ministerio de Ciencia, Innovación y Universidades (PID2022-136535OB-I00), to CO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the Catalytic Performance of β-Mannanase via Polyvinyl Alcohol Immobilization and Genipin Modification

  • Faki, Nazli Ece Varan
  • Toprak, Ali
  • Yucebilgic, Guzide
  • Alagöz, Dilek
  • Yildirim, Deniz
  • Fernández-Lafuente, Roberto
This article belongs to the Special Issue Application of Bioenzyme Engineering and Enzyme Catalysis in the Food Industry, This study reports the immobilization of β-mannanase from Aspergillus niger—either unmodified or genipin-modified—within polyvinyl alcohol hydrogels (PVA@mannanase and PVA@mannanase-Gen) for the enhanced production of mannooligosaccharides (MOSs). All enzyme preparations showed an optimal pH of 5.0, while immobilization shifted the optimal temperature from 40 °C for the free enzyme to 55 °C for the immobilized forms. Genipin modification notably improved stability, increasing the half-life from 25.3 h (free enzyme) to 429.2 h in PVA@mannanase-Gen, and raised catalytic efficiency by approximately 2.3-fold. Both immobilized preparations retained over 75% of their activity after five reuse cycles at pH 5 and 55 °C. Using PVA@mannanase-Gen under these optimized conditions, MOSs were effectively produced, with mannotetraose as the predominant product. To explore their potential applications, the MOSs generated from locust bean gum were evaluated for effects on MCF-7 and HCT-116 cancer cell lines, resulting in moderate growth inhibition (~24–25% at 0.4 mM after 24 h). Together, these findings demonstrate that the immobilization of the genipin-modified enzyme not only enhances β-mannanase stability and performance but also supports the efficient production of MOSs with promising antitumoral activity., This research was funded by Agencia Estatal de Investigación (Spain), grant number PID2022-136535OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The structure of the immobilized Eversa Transform determines the activity/stability effects of the biocatalyst metallization

  • Souza, Leonardo de
  • Sabi, Guilherme J
  • Abellanas-Perez, Pedro
  • Mendes, Adriano A
  • Tardioli, Paulo W
  • Rocha-Martin, Javier
  • Fernandez-Lafuente, Roberto
In this paper, the human designed lipase Eversa Transform (ETL) has been immobilized on octyl agarose beads using 4 previously published protocols that provided biocatalysts with very different properties. Then, the biocatalysts were submitted to incubation with 7 different metal cations in Tris or buffer, with the objective of checking if the immobilized enzyme altered its properties after metallization and whether this modification has different qualitative and quantitative values when changing the immobilized enzyme protocol (that is, maintaining enzyme, support and enzyme orientation, only changing the enzyme structure). Enzyme activity versus nitro-phenol butyrate at different pH values using different buffers, enzyme activities versus this substrate and triacetin and R or S methyl mandelate and the enzyme stability under different conditions were studied. The results showed that the enzyme activity/ pH curve and specificity versus different substrates are drastically changed upon metallization, these changes depending on the presence of Tris or phosphate during mineralization and very interestingly, depending on the biocatalyst that is submitted to this treatment. The same treatment could increase the enzyme activity or stability for one biocatalyst while it could be negative for other biocatalysts., Roberto Fernandez-Lafuente gratefully recognizes the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00). Javier Rocha-Martin gratefully recognizes the financial support from MICIU/AEI/10.13039/501100011033, ERDF A way of making Europe and European Union NextGenerationEU/PRTR (CNS2022-135135 and PID2022-139209OB-C22). AAM recognizes the support from CNPq (project 306253/2023-2). Guilherme J. Sabi and Leonardo de Sousa gratefully recognice Coordenação de Aperfeiçoamento de Pessoal de Nível Superior–Brasil (CAPES, Finance Code 001; CAPES-PRINT Process Numbers 88887.936648/2024-00; CAPES-PDSE Process Numbers 88881.933605/2024-01) for supporting the stay at ICP-CSIC. We recognize the help and useful comments from Angel Berenguer-Murcia (Universidad de Alicante) during the writing of this paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation and characterization of different immobilized and chemically modified preparations of lipase B from Candida antarctica: is it the activation energy a good indicator of the biocatalyst expressed activity?

  • Hackenhaar, Camila R.
  • Abellanas-Perez, Pedro
  • Carballares, Diego
  • Bolivar, Juan M
  • Rodrigues, Rafael C
  • Fernandez-Lafuente, Roberto
Lipase B from Candida antarctica immobilized on octyl (via interfacial activation) and octyl-vinyl sulfone (covalently attached) agarose beads via different immobilization protocols was submitted to amination and/or glutaraldehyde modifications. The catalytic performance of the resulting biocatalysts significantly varied across different substrates: using octyl-CALB with the double modification, activity increased 3.5 fold versus triacetin and decreased by 5 % using R-methyl mandelate, while using the covalent biocatalyst, activity increase by 2.2 or 20 %, respectively. Similarly, the stability of the biocatalysts -both in absolute and relative terms- was strongly influenced by the inactivation pH and the substrate used for residual activity determination. Under the tested conditions, activity versus substrate concentration followed first-order kinetics up to the substrate solubility limit, preventing the determination of kinetic parameters such as Kcat or Km. Activation energy (Eₐ) for triacetin hydrolysis was also measured for each biocatalyst under different inactivation states. Interestingly, no consistent correlation was found between Eₐ and enzyme activity. Generally, partial inactivation of the biocatalysts increased Eₐ, although some exceptions were observed. These findings suggest that Eₐ alone does not directly correlate with enzymatic activity, highlighting the complex interplay between structural enzyme modifications, substrate used to determine the enzyme activity, and the enzyme catalytic behavior., JMB acknowledges funding from project CNS2022-135541 financed by MICIU/AEI /10.13039/501100011033 and by European Union NextGeneration EU/PRTR. DCN and JMB acknowledges funding from Pathfinder Open 2022, a European Innovation Council (EIC) work program that is part of Horizon Europe (grant agreement no. 101099528) and UK Innovation Funding Agency (UKRI) (reference no. 10062709). RFL acknowledges the support from MINECO and AEI via project PID2022-136535OB-I00. RCR acknowledges the support from CNPq (Process: 403151/2023-6) and FAPERGS (Process: 22/2551-0000397-4). CRH acknowledges the support by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brazil (CAPES) – Finance Code 001., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly (Ethylene-Alt-Maleic Anhydride) Ionic Modification of Lipase B from Candida antarctica Immobilized on Octyl Agarose Beads Alters Its Catalytic Properties

  • Gonzalez-Vasquez, Alex D.
  • Abellanas-Pérez, Pedro
  • Rocha-Martín, Javier
  • Urzúa, Marcela
  • Fernández-Lafuente, Roberto
The lipase B from Candida antarctica was immobilized on octyl-agarose using low and high (one that saturated the support surface with enzyme) loadings. Then, both biocatalysts were aminated, and the aminated and non-aminated biocatalysts were used in further experiments. The enzyme activity was determined using substrates with different structures. The modification of the four biocatalysts with poly (ethylene-alt-maleic anhydride) revealed that only a marginal covalent reaction occurs. That way, the ion exchange of the polymer on the immobilized enzyme surface should be responsible for the enzyme functional changes. The modification of the biocatalysts with this polymer produced mixed results for enzyme activity (depending on the enzyme loading, use of aminated or non-aminated enzyme, polymer concentration and used substrate), in some instances more than doubling the activity, in others reducing it by 5–6 times the activity when compared to the unmodified biocatalyst. The effects on biocatalyst stability were also mixed, depending on the same factors; in some instances, great stabilization could be found (e.g., in inactivation of the highly loaded aminated biocatalyst at pH 7.0, the unmodified biocatalyst kept 5% of the initial activity, while the biocatalyst modified with 1% of the polymer maintained 80%), but in other instances, enzyme stability was reduced after modification. It was shown that one of the effects of the polymer modification was the prevention of the enzyme release during inactivation., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022-136535OB-I00) and FONDECYT (Project N° 1231631(MU). A.D.G.-V. gratefully recognizes a Beca Doctorado Nacional (N° 21212403) and Agencia Nacional de Investigación y Desarrollo ANID for funding this research study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization of large-pore intergrowth zeolites SSZ-31 and PST-38

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Mayoral, Álvaro
  • Hong, Suk Bong
The structure determination of multiple-phase intergrowth zeolites faces more challenges than that of single-phase ordered zeolites because of their structural complexity and diversity. Here, we directly visualized the atomic structure and one-dimensional stacking disorder of the pure-silica large-pore intergrowth zeolites SSZ-31 and PST-38, using aberration-corrected scanning transmission electron microscopy. The atomic-resolution images revealed the presence of distinct polymorphs, their intergrowth boundaries, and cages formed through local connectivity variations. It was found that while SSZ-31 is an almost pure (ca. 90%) polymorph A, E, or their intergrowth, with the ABC stacking of 12-ring channels, PST-38 is a predominant intergrowth between SSZ-31 polymorph C and a 1D 10-ring structure, denoted as PST-39, along the same axis. Furthermore, the latter material also contains a region where the 8-membered rings are connected to the 12- and 10-membered rings. The structural features of SSZ-31 and PST-38 presented here provide insights into the design and synthesis of intergrowth zeolites., This work was supported by the Shanxi Research Institute of Huairou Laboratory, EcoPro HN, the KRICT Institutional Research Program (KK2412-10), the Spanish Ministry of Science MICIU/AEI/10.13039/501100011033 (CNS2023-144346, CEX2023-001286-S, and PID2022-136535OB-I00), the Spanish National Research Council, CSIC (COOPB23035), and the Regional Government of Aragon (DGA E13_20R). We also thank the use of instrumentation, as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Diaz, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Surface-Driven Electron Localization and Defect Heterogeneity in Ceria

  • Zhang, Xingfan
  • Yoko, Akira
  • Zhou, Yi
  • Jee, Woongkyu
  • Mayoral, Alvaro
  • Liu, Taifeng
  • Guan, Jingcheng
  • Lu, You
  • Keal, Thomas W.
  • Buckeridge, John
  • Ninomiya, Kakeru
  • Nishibori, Maiko
  • Yamamoto, Susumu
  • Matsuda, Iwao
  • Adschiri, Tadafumi
  • Terasaki, Osamu
  • Woodley, Scott M.
  • Catlow, C. Richard A.
  • Sokol, Alexey A.
The exceptional performance of ceria (CeO2) in catalysis and energy conversion is fundamentally governed by its defect chemistry, particularly oxygen vacancies. The formation of each oxygen vacancy (VO••) is assumed to be compensated by two localized electrons on cations (Ce3+). Here, we show by combining theory with experiment that while this 1 VO••: 2Ce3+ ratio accounts for the global charge compensation, it does not apply at the local scale, particularly in nanoparticles. Hybrid quantum mechanical/molecular mechanical (QM/MM) defect calculations, together with synchrotron X-ray photoelectron spectroscopy (XPS) measurements, show that electrons have a strong preference to localize and segregate on surfaces, which can overcome the trapping force from the VO•• sites in the bulk. At a given Fermi level, the surface VO•• tends to trap more electrons than those in bulk, resulting in a higher Ce3+ to VO•• ratio on surfaces than that in the bulk, driven by the preferential localization of electrons and enhanced VO••–Ce3+coupling. Large-scale unbiased Monte Carlo simulations on ceria nanoparticles confirmed this trend and further show that the surface segregation of electrons is more pronounced at low reduction levels and in smaller nanoparticles. In highly reduced ceria nanoparticles, however, the enhanced repulsive interactions lead to a less significant extent of defect heterogeneity or even reverse the location preference of defects in some nanoparticles. Our findings underscore the need to consider both the overall nonstoichiometry and local defect behavior in easily reducible oxides, with direct relevance to their performance in catalytic and energy applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural Characterization of Large-Pore Intergrowth Zeolites SSZ-31 and PST-38

  • Kemp, Kingsley Christian
  • Jo, Donghui
  • Mayoral, Alvaro
  • Hong, Suk Bong
The structure determination of multiple-phase intergrowth zeolites faces more challenges than that of single-phase ordered zeolites because of their structural complexity and diversity. Here, we directly visualized the atomic structure and one-dimensional stacking disorder of the pure-silica large-pore intergrowth zeolites SSZ-31 and PST-38, using aberration-corrected scanning transmission electron microscopy. The atomic-resolution images revealed the presence of distinct polymorphs, their intergrowth boundaries, and cages formed through local connectivity variations. It was found that while SSZ-31 is an almost pure (ca. 90%) polymorph A, E, or their intergrowth, with the ABC stacking of 12-ring channels, PST-38 is a predominant intergrowth between SSZ-31 polymorph C and a 1D 10-ring structure, denoted as PST-39, along the same axis. Furthermore, the latter material also contains a region where the 8-membered rings are connected to the 12- and 10-membered rings. The structural features of SSZ-31 and PST-38 presented here provide insights into the design and synthesis of intergrowth zeolites.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Adsorption features of reduced aminated supports modified with glutaraldehyde: Understanding the heterofunctional features of these supports

  • Andrades, Diandra de
  • Abellanas, Pedro
  • Carballares Navarro, Diego
  • Alcántara León, Andrés Rafael
  • Polizeli, Maria de Lourdes Teixeira de Moraes
  • Rocha Martín, Javier
  • Fernandez-Lafuente, Roberto
Immobilization of enzymes on aminated supports using the glutaraldehyde chemistry may involve three different interactions, cationic, hydrophobic, and covalent interactions. To try to understand the impact this heterofunctionality, we study the physical adsorption of the beta-galactosidase from Aspergillus niger, on aminated supports (MANAE) and aminated supports with one (MANAE-GLU) or two molecules of glutaraldehyde (MANAE-GLU-GLU). To eliminate the chemical reactivity of the glutaraldehyde, the supports were reduced using sodium borohydride. After enzyme adsorption, the release of the enzyme from the supports using different NaCl concentrations, Triton X100, ionic detergents (SDS and CTAB), or different temperatures (4 °C to 55 °C) was studied. Using MANAE support, at 0.3 M NaCl almost all the immobilized enzyme was released. Using MANAE-GLU, 0.3 M, and 0.6 M NaCl similar results were obtained. However, incubation at 1 M or 2 M NaCl, many enzyme molecules were not released from the support. For the MANAE-GLU-GLU support, none of the tested concentrations of NaCl was sufficient to release all enzyme bound to the support. Only using high temperatures, 0.6 M NaCl, and 1 % CTAB or SDS, could the totality of the proteins be released from the support. The results shown in this paper confirm the heterofunctional character of aminated supports modified with glutaraldehyde.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Vinyl sulfone-amino-alkyl supports: heterofunctional matrixes to prevent enzyme release and stabilize lipases via covalent immobilization

  • Abellanas Pérez, Pedro
  • de Andrades, Diandra
  • Alcántara León, Andrés Rafael
  • Rocha Martín, Javier
  • Polizeli, Maria de Lourdes Teixeira de Moraes
  • Fernandez Lafuente, Roberto
New trifunctional supports were prepared (amino-octyl-vinyl sulfone (VS)- and amino-hexyl-VS-agarose) and compared to octyl-VS-agarose. They were utilized to immobilize the lipases A and B from Candida antarctica (CALA and CALB). After incubation to generate some enzyme-support bonds and blocking with different nucleophiles, SDS-PAGE analyses showed that all enzyme molecules become covalently immobilized on the support. In all VS biocatalysts, the blocking reagent presented a great effect in the properties of enzymes. The best blocking agents promoted a significant enzyme stabilization compared to the enzyme stability using the amino-alkyl-agarose supports, higher than that using octyl-VS-agarose supports, although these remained the most stable ones in most cases, as the octyl-biocatalysts were significantly more stable than the enzyme immobilized on amino-alkyl-support. Enzyme activities and specificities could be also greatly tuned by the immobilization in the new trifunctional supports, with enzyme activities in many instances enhancing that of the best non-covalently immobilized enzyme. That way, the results on this paper show that the properties of the enzymes when immobilized on these new trifunctional supports may be significantly tuned by the nature of the acyl chain in the support and the nature of the reagent used to block the reactivity of the remaining VS groups.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Changes in ficin specificity by different substrate proteins promoted by enzyme immobilization

  • González Vásquez, Alex D.
  • Hocine, El Siar
  • Urzúa, Marcela
  • Rocha Martín, Javier
  • Fernández Lafuente, Roberto
Ficin extract has been immobilized using different supports: glyoxyl and Aspartic/1,6 hexamethylenediamine (Asp/HA) agarose beads. The latter was later submitted to glutaraldehyde modification to get covalent immobilization. The activities of these 3 kinds of biocatalysts were compared utilizing 4 different substrates, casein, hemoglobin and bovine serum albumin and benzoyl-arginine-p-nitroanilide at pH 7 and 5. Using glyoxyl-agarose, the effect of enzyme-support reaction time on the activity versus the four substrates at both pH values was studied. Reaction time has been shown to distort the enzyme due to an increase in the number of covalent support-enzyme bonds. Surprisingly, for all the substrates and conditions the prolongation of the enzyme-support reaction did not imply a decrease in enzyme activity. Using the Asp/HA supports (with different amount of HA) differences in the effect on enzyme activity versus the different substrates are much more significant, while with some substrates the immobilization produced a decrease in enzyme activity, with in other cases the activity increased. These different effects are even increased after glutaraldehyde treatment. That way, the conformational changes induced by the biocatalyst immobilization or the chemical modification fully altered the enzyme protein specificity. This may also have some implications when following enzyme inactivation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Enzyme loading in the support and medium composition during immobilization alter activity, specificity and stability of octyl agarose-immobilized Eversa Transform

  • Sabi, Guilherme J.
  • De Souza, Leonardo
  • Abellanas Perez, Pedro
  • Tardioli, Paulo W.
  • Mendes, Adriano A.
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
Eversa Transform (ETL) was immobilized on octyl agarose beads at two different enzymes loadings (1 mg/g and 15 mg/g) under 18 different conditions, including different pH values, buffers, additives (different solvents, Ca2+, NaCl). Their activity was analyzed at pH 5 and 7 with p-nitrophenyl butyrate and at pH 5 with triacetin, determining also its stability at pH 5 and 7 (in different media). Ca2+ stabilized ETL biocatalysts while phosphate destabilized them. The overloaded biocatalysts were generally less stable and with a lower specific activity than the lowly loaded biocatalyst. Results show that enzyme activity (even by a 3 fold factor) and stability of the immobilized enzyme may be tailored by controlling the immobilization conditions, but the effects of the immobilization conditions on activity depend on the substrate and conditions of activity determination, the effects on stability depend on the inactivation conditions. Moreover, the enzyme loading of the biocatalysts defines the effects of the immobilization conditions, and there are clear interactions between immobilization conditions (e.g., immobilization pH determines the effect of the presence of NaCl). These suggest that the extrapolation of the results obtained with one substrate under one condition to other conditions can lead to wrong decisions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

The nature of the buffer alters the effects of the chemical modification on the stability of immobilized lipases

  • Abellanas Perez, Pedro
  • Carballares, Diego
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
The objective of this paper was to analyze whether an interaction between the effects of the buffer nature and chemical modification on enzyme stability exists. For this, the lipase B from Candida antarctica (CALB) and the lipase from Thermomyces lanuginosus (TLL) were immobilized on octyl agarose beads and modified with picryl sulfonic acid (TNBS) and ethylenediamine via the carbodiimide route. The obtained biocatalysts were them inactivated in different buffers (2-amino-2-(hydroxymethyl)propane-1,3-diol (Tris)-HCl, N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonic acid) (HEPES) or phosphate). A significant interaction was found between the chemical modification of the enzyme surfaces and their stabilities in these different buffers. While phosphate was the buffer where the lowest enzyme stabilities were found for both unmodified immobilized enzymes, the differences on enzyme stabilities become much smaller after some chemical modifications. In many instances, chemical modification improves enzyme stability when using a buffer and was negative when using the other one (e.g., TNBS modification of TLL was positive using Tris-HCl or negative using the other buffers, amination of CALB decreased its stability when inactivated in Tris-HCl or HEPES while it almost had no effect in phosphate). Thus, clear co-interactions of the effects o
Docta Complutense
Publicación Artículo científico (JournalArticle)

The Effects of Buffer Nature on Immobilized Lipase Stability Depend on Enzyme Support Loading

  • Abellanas Pérez, Pedro
  • Carballares Navarro, Diego
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
The lipases from Thermomyces lanuginosus (TLL) and Candida antarctica (B) (CALB) were immobilized on octyl-agarose beads at 1 mg/g (a loading under the capacity of the support) and by overloading the support with the enzymes. These biocatalysts were compared in their stabilities in 10 mM of sodium phosphate, HEPES, and Tris-HCl at pH 7. Lowly loaded CALB was more stable than highly loaded CALB preparation, while with TLL this effect was smaller. Phosphate was very negative for the stability of the CALB biocatalyst and moderately negative using TLL at both loadings. The stability of the enzymes in HEPES and Tris-HCl presented a different response as a function of the enzyme loading (e.g., using lowly loaded CALB, the stabilities were similar in both buffers, but it was clearly smaller in HEPES using the highly loaded biocatalysts). Moreover, the specific activity of the immobilized enzymes versus p-nitrophenol butyrate, triacetin and R- or S-methyl mandelate depended on the buffer, enzyme loading, and interaction between them. In some cases, almost twice the expected activity could be obtained using highly loaded octyl-CALB, depending on the buffer. A co-interaction between the effects on enzyme activity and the specificity of support enzyme loading and buffer nature was detected.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Support Enzyme Loading Influences the Effect of Aldehyde Dextran Modification on the Specificity of Immobilized Ficin for Large Proteins

  • Siar, El Hocine
  • Abellanas Pérez, Pedro
  • Rocha Martín, Javier
  • Fernández Lafuente, Roberto
It has been reported that the modification of immobilized glyoxyl–ficin with aldehyde dextran can promote steric hindrances that greatly reduce the activity of the immobilized protease against hemoglobin, while the protease still maintained a reasonable level of activity against casein. In this paper, we studied if this effect may be different depending on the amount of ficin loaded on the support. For this purpose, both the moderately loaded and the overloaded glyoxyl–ficin biocatalysts were prepared and modified with aldehyde dextran. While the moderately loaded biocatalyst had a significantly reduced activity, mainly against hemoglobin, the activity of the overloaded biocatalyst was almost maintained. This suggests that aldehyde dextran was able to modify areas of the moderately loaded enzyme that were not available when the enzyme was overloaded. This modification promoted a significant increase in biocatalyst stability for both biocatalysts, but the stability was higher for the overloaded biocatalyst (perhaps due to a combination of inter- and intramolecular crosslinking).
Docta Complutense
Publicación Artículo científico (JournalArticle)

Poly (Ethylene-Alt-Maleic Anhydride) Ionic Modification of Lipase B from Candida antarctica Immobilized on Octyl Agarose Beads Alters Its Catalytic Properties

  • Gonzalez Vasquez, Alex D.
  • Abellanas Perez, Pedro
  • Rocha Martín, Javier
  • Urzúa, Marcela
  • Fernandez Lafuente, Roberto
The lipase B from Candida antarctica was immobilized on octyl-agarose using low and high (one that saturated the support surface with enzyme) loadings. Then, both biocatalysts were aminated, and the aminated and non-aminated biocatalysts were used in further experiments. The enzyme activity was determined using substrates with different structures. The modification of the four biocatalysts with poly (ethylene-alt-maleic anhydride) revealed that only a marginal covalent reaction occurs. That way, the ion exchange of the polymer on the immobilized enzyme surface should be responsible for the enzyme functional changes. The modification of the biocatalysts with this polymer produced mixed results for enzyme activity (depending on the enzyme loading, use of aminated or non-aminated enzyme, polymer concentration and used substrate), in some instances more than doubling the activity, in others reducing it by 5–6 times the activity when compared to the unmodified biocatalyst. The effects on biocatalyst stability were also mixed, depending on the same factors; in some instances, great stabilization could be found (e.g., in inactivation of the highly loaded aminated biocatalyst at pH 7.0, the unmodified biocatalyst kept 5% of the initial activity, while the biocatalyst modified with 1% of the polymer maintained 80%), but in other instances, enzyme stability was reduced after modification. It was shown that one of the effects of the polymer modification was the prevention of the enzyme release during inactivation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Tailoring the specificity of ficin versus large hemoglobin and small casein by co-immobilizing inert proteins on the immobilized enzyme layer and further modification with aldehyde dextran

  • Siar, El Hocine
  • Abellanas Pérez, Pedro
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
Ficin has been immobilized at full loading on glyoxyl agarose beads. Then, ficin was blocked with 2,2′-dipyridyldisulfide. To be effective, the modification must be performed in the presence of 0.5 M urea, as the enzyme was not inhibited under standard conditions, very likely because the catalytic Cys was not fully exposed to the medium. Activity could be fully recovered by incubation with 1 M mercaptoethanol. This biocatalyst could hydrolyze hemoglobin and casein. The objective of this paper was to increase the enzyme specificity versus small proteins by generating steric hindrances to the access of large proteins. The step by step blocking via ionic exchange of the biocatalyst with aminated bovine serum albumin (BSA), aldehyde dextran and a second layer of aminated BSA produced a biocatalyst that maintained its activity versus small synthetic substrates, increased the biocatalyst stability, while reduced its activity to over 50 % versus casein. Interestingly, this treatment almost fully annulled the activity versus hemoglobin, more effectively at 37 °C than at 55 °C. The biocatalyst could be reused 5 times without changes in activity. The changes could be caused by steric hindrances, but it cannot be discarded some changes in enzyme sequence specificity caused by the modifications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

The structure of the immobilized Eversa Transform determines the activity/stability effects of the biocatalyst metallization

  • de Souza, Leonardo
  • Sabi, Guilherme J.
  • Abellanas Perez, Pedro
  • Mendes, Adriano A.
  • Tardioli, Paulo W.
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
In this paper, the human designed lipase Eversa Transform (ETL) has been immobilized on octyl agarose beads using 4 previously published protocols that provided biocatalysts with very different properties. Then, the biocatalysts were submitted to incubation with 7 different metal cations in Tris or buffer, with the objective of checking if the immobilized enzyme altered its properties after metallization and whether this modification has different qualitative and quantitative values when changing the immobilized enzyme protocol (that is, maintaining enzyme, support and enzyme orientation, only changing the enzyme structure). Enzyme activity versus nitro-phenol butyrate at different pH values using different buffers, enzyme activities versus this substrate and triacetin and R or S methyl mandelate and the enzyme stability under different conditions were studied. The results showed that the enzyme activity/ pH curve and specificity versus different substrates are drastically changed upon metallization, these changes depending on the presence of Tris or phosphate during mineralization and very interestingly, depending on the biocatalyst that is submitted to this treatment. The same treatment could increase the enzyme activity or stability for one biocatalyst while it could be negative for other biocatalysts.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Designing mixed cationic/anionic supports to covalently immobilize/stabilize enzymes with high isoelectric point by enzyme adsorption and support-enzyme glutaraldehyde crosslinking

  • Gonzalez Vasquez, Alex D.
  • Hocine, El Siar
  • Alcántara, Andrés R.
  • Urzúa, Marcela
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
Ficin fully immobilized on Asp-agarose beads at pH 7 but not on an aminated support. This made enzyme adsorption plus glutaraldehyde modification non-viable for this enzyme. Modifying glyoxyl-agarose beads with mixtures of Asp and 1,6-hexamethylenediamine (HA) at different ratios, mixed anion/cation exchanger supports were built. Only if HA greatly exceed Asp in the support, immobilization did not work. While only using the Asp-agarose support immobilized enzyme molecules were only ionically adsorbed after glutaraldehyde treatment (visualized in SDS-PAGE analysis), the mixed supports gave covalent immobilization. The glutaraldehyde modification of these biocatalysts permitted to establish covalent bonds with the support, and this was more effective when using higher amounts of HA in the support. When around 60 % of the groups in the support were HA, the treatment with glutaraldehyde fully suppressed enzyme release from the support after boiling in SDS. The glutaraldehyde treated biocatalysts were more stable than just the adsorbed enzymes or the enzyme adsorbed only on Asp supports and then treated with glutaraldehyde (the optimal biocatalyst retained 90 % of the initial activity while the just adsorbed ficin retained 50 % of the initial activity). This strategy can be utilized to immobilize other proteins with high isoelectric points following this immobilization strategy.
Docta Complutense
Publicación Artículo científico (JournalArticle)

The effects of the chemical modification on immobilized lipase features are affected by the enzyme crowding in the support

  • Abellanas‐Perez, Pedro
  • Carballares Navarro, Diego
  • Rocha Martín, Javier
  • Fernandez Lafuente, Roberto
In this article, we have analyzed the interactions between enzyme crowding on a given support and its chemical modification (ethylenediamine modification via the carbodiimide route and picryl sulfonic (TNBS) modification of the primary amino groups) on the enzyme activity and stability. Lipase from Thermomyces lanuginosus (TLL) and lipase B from Candida antarctica (CALB) were immobilized on octyl-agarose beads at two very different enzyme loadings, one of them exceeding the capacity of the support, one well under this capacity. Chemical modifications of the highly loaded and lowly loaded biocatalysts gave very different results in terms of activity and stability, which could increase or decrease enzyme activity depending on the enzyme support loading. For example, both lowly loaded biocatalysts increased their activity after modification while the effect was the opposite for the highly loaded biocatalysts. Additionally, the modification with TNBS of highly loaded CALB biocatalyst increased its stability while decrease the activity.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Glutaraldehyde modification of lipases immobilized on octyl agarose beads: Roles of the support enzyme loading and chemical amination of the enzyme on the final enzyme features

  • Abellanas Perez, Pedro
  • Carballares Navarro, Diego
  • Fernandez Lafuente, Roberto
  • Rocha Martín, Javier
Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) have been immobilized on octyl agarose at low loading and at a loading exceeding the maximum support capacity. Then, the enzymes have been treated with glutaraldehyde and inactivated at pH 7.0 in Tris-HCl, sodium phosphate and HEPES, giving different stabilities. Stabilization (depending on the buffer) of the highly loaded biocatalysts was found, very likely as a consequence of the detected intermolecular crosslinkings. This did not occur for the lowly loaded biocatalysts. Next, the enzymes were chemically aminated and then treated with glutaraldehyde. In the case of TLL, the intramolecular crosslinkings (visible by the apparent reduction of the protein size) increased enzyme stability of the lowly loaded biocatalysts, an effect that was further increased for the highly loaded biocatalysts due to intermolecular crosslinkings. Using CALB, the intramolecular crosslinkings were less intense, and the stabilization was lower, even though the intermolecular crosslinkings were quite intense for the highly loaded biocatalyst. The stabilization detected depended on the inactivation buffer. The interactions between enzyme loading and inactivating buffer on the effects of the chemical modifications suggest that the modification and inactivation studies must be performed under the target biocatalysts and conditions.