Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Glutaraldehyde modification of lipases immobilized on octyl agarose beads: Roles of the support enzyme loading and chemical amination of the enzyme on the final enzyme features

  • Abellanas Pérez, Pedro
  • Carballares Navarro, Diego
  • Fernández Lafuente, Roberto
  • Rocha Martín, Javier
Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) have been immobilized on octyl agarose at low loading and at a loading exceeding the maximum support capacity. Then, the enzymes have been treated with glutaraldehyde and inactivated at pH 7.0 in Tris-HCl, sodium phosphate and HEPES, giving different stabilities. Stabilization (depending on the buffer) of the highly loaded biocatalysts was found, very likely as a consequence of the detected intermolecular crosslinkings. This did not occur for the lowly loaded biocatalysts. Next, the enzymes were chemically aminated and then treated with glutaraldehyde. In the case of TLL, the intramolecular crosslinkings (visible by the apparent reduction of the protein size) increased enzyme stability of the lowly loaded biocatalysts, an effect that was further increased for the highly loaded biocatalysts due to intermolecular crosslinkings. Using CALB, the intramolecular crosslinkings were less intense, and the stabilization was lower, even though the intermolecular crosslinkings were quite intense for the highly loaded biocatalyst. The stabilization detected depended on the inactivation buffer. The interactions between enzyme loading and inactivating buffer on the effects of the chemical modifications suggest that the modification and inactivation studies must be performed under the target biocatalysts and conditions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Biocatalytic production of biolubricants: strategies, problems and future trends

  • Monteiro, Rodolpho R.C.
  • Berenguer Murcia, Ángel
  • Rocha Martín, Javier
  • Vieira, Rodrigo S.
  • Fernandez Lafuente, Roberto
The increasing worries by the inadequate use of energy and the preservation of nature are promoting an increasing interest in the production of biolubricants. After discussing the necessity of producing biolubricants, this review focuses on the production of these interesting molecules through the use of lipases, discussing the different possibilities (esterification of free fatty acids, hydroesterification or transesterification of oils and fats, transesterification of biodiesel with more adequate alcohols, estolides production, modification of fatty acids). The utilization of discarded substrates has special interest due to the double positive ecological impact (e.g., oil distillated, overused oils). Pros and cons of all these possibilities, together with general considerations to optimize the different processes will be outlined. Some possibilities to overcome some of the problems detected in the production of these interesting compounds will be also discussed.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Novel Lipase from Streptomyces exfoliatus DSMZ 41693 for Biotechnological Applications

  • Rodríguez-Alonso, Guillermo
  • Toledo-Marcos, Juan
  • Serrano-Aguirre, Lara
  • Rumayor, Carlos
  • Pasero, Beatriz
  • Flores, Aida
  • Saborido, Ana
  • Hoyos, Pilar
  • Hernáiz, María J.
  • Mata, Isabel de la
  • Arroyo, Miguel
Genome mining of Streptomyces exfoliatus DSMZ 41693 has allowed us to identify four different lipase-encoding sequences, and one of them (SeLipC) has been successfully cloned and extracellularly expressed using Rhodococcus sp. T104 as a host. SeLipC was purified by one-step hydrophobic interaction chromatography. The enzyme is a monomeric protein of 27.6 kDa, which belongs to subfamily I.7 of lipolytic enzymes according to its phylogenetic analysis and biochemical characterization. The purified enzyme shows the highest activity at 60 °C and an optimum pH of 8.5, whereas thermal stability is significantly improved when protein concentration is increased, as confirmed by thermal deactivation kinetics, circular dichroism, and differential scanning calorimetry. Enzyme hydrolytic activity using p-nitrophenyl palmitate (pNPP) as substrate can be modulated by different water-miscible organic cosolvents, detergents, and metal ions. Likewise, kinetic parameters for pNPP are: KM = 49.6 µM, kcat = 57 s−1, and kcat/KM = 1.15 × 106 s−1·M−1. SeLipC is also able to hydrolyze olive oil and degrade several polyester-type polymers such as poly(butylene succinate) (PBS), poly(butylene succinate)-co-(butylene adipate) (PBSA), and poly(ε-caprolactone) (PCL). Moreover, SeLipC can catalyze the synthesis of different sugar fatty acid esters by transesterification using vinyl laurate as an acyl donor, demonstrating its interest in different biotechnological applications., This research was funded by the Ministerio de Ciencia, Innovación y Universidades of Spain, grants RTI2018-096037B-I00, TED2021-131462B-I00, TED2021-130430B-C21, and PDC2022-133817-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eversa transform 2.0 immobilized on a hydrophobic support enables the solvent-free almost quantitative esterification of the free fatty acids from soybean oil with neopentylglycol

  • Monteiro, Rodolpho R. C.
  • Neta, Maria M.F. de Melo
  • Soares, Jorge B.
  • Lomonaco, Diego
  • Luna, F. Murilo T. de
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The performance of Eversa Transform 2.0 (ETL) and lipase from Thermomyces lanuginosus (TLL) was compared in the solvent-free esterification of the free fatty acids (FFAs) from soybean oil with neopentylglycol (NPG) to produce NPG-diesters, which may be used as biolubricants. Enzymes were immobilized by interfacial activation on an octadecyl-coated methacrylate macroporous resin (C18) and compared to commercially immobilized TLL (Lipozyme® TL IM), free ETL and TLL. ETL@C18 surpassed the performance of all tested biocatalysts, reaching up to 98 % of FFAs conversion after 6 h of reaction at 50 °C and using a biocatalyst content of 9 wt% (related to the mass of FFAs). After optimization, the reactor temperature had a higher influence on the production of the NPG-diesters than the biocatalyst content, so that 45 °C and 3 wt% were determined to be the optimal values. Under such conditions, ETL@C18 retained approximately 88 % of its initial conversion into the NPG-diesters even after 10 consecutive reaction cycles. The biolubricant is composed mainly of NPG-diesters (∼91 %) and unreacted NPG (∼9 %), as confirmed by NMR analysis. The NPG-diesters exhibited a higher viscosity index (from 190.84 to 215.86) and oxidative stability (from 0.10 h to 1.34 h) than the starting material. The NPG-diesters biolubricant also exhibited a lower friction coefficient (0.049 against 0.064) and wear scar diameter (139.03 μm against 151.43 μm) than the 20W-50 mineral lubricant., The Spanish government is gratefully recognized by the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación by the financial support to Roberto Fernandez-Lafuente (PID2022-136535OB-I00 and TED2021-131462B-I00). The Brazilian government is gratefully recognized by the Programa de Formação de Recursos Humanos from the Agência Nacional de Petróleo (PRH/ANP) by the doctoral scholarship to Rodolpho R. C. Monteiro., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the performance of lipases in the full hydrolysis of residual coconut oil by immobilization on hydrophobic supports

  • Monteiro, Rodolpho R. C.
  • Luna, F. Murilo T. de
  • Lomonaco, Diego
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The effect of the immobilization via interfacial activation on hydrophobic supports of lipase A from Candida antarctica (CALA) and Eversa Transform 2.0 (ETL) in the hydrolysis of residual coconut oil is herein explored. Firstly, some important process parameters (biocatalyst content, substrates ratio, reactor temperature and stirring) were evaluated using the Taguchi method for both free biocatalysts. For free ETL, it was possible to reach full hydrolysis after 6 h under optimized reaction conditions (9 wt% of ETL, 1:2 (oil/water, w/w), 50 °C and 180 rpm). For free CALA, reaching full hydrolysis was not possible under the same optimized reaction conditions, even after 24 h of reaction. Then, ETL and CALA were immobilized by interfacial activation on a methacrylate macroporous resin particles containing octadecyl groups. After reaction conditions optimization by the Taguchi method, immobilized ETL (ETL@C18) reached full hydrolysis under the same optimized reaction conditions of free ETL, but in only 3 h. Immobilized CALA (CALA@C18), reached full hydrolysis (>99 %) after 24 hours under optimized reaction conditions which was not possible employing free CALA (56 %). Finally, under optimized reaction conditions, ETL@C18 retained 85 % of its initial activity after 10 consecutive hydrolysis cycles, whereas CALA@C18 retained less than 50 % of its initial activity after 5 consecutive hydrolysis cycles., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00 and TED2021–131462B-I00). Rodolpho R. C. Monteiro thanks Programa de Formação de Recursos Humanos – Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1 – ANP/Finep)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the enzymatic production of biolubricants by the Taguchi method: Esterification of the free fatty acids from castor oil with 2-ethyl-1-hexanol catalyzed by Eversa Transform 2.0

  • Monteiro, Rodolpho R. C.
  • Neta, Maria M.F. de Melo
  • Rocha, Wesley S.
  • Soares, Jorge B.
  • Luna, F. Murilo T. de
  • Fernández-Lafuente, Roberto
  • Vieira, Rodrigo S.
The solvent-free esterification of the free fatty acids (FFAs) obtained by the hydrolysis of castor oil (a non-edible vegetable oil) with 2-ethyl-1-hexanol (a branched fatty alcohol) was catalyzed by different free lipases. Eversa Transform 2.0 (ETL) features surpassed most commercial lipases. Some process parameters were optimized by the Taguchi method (L16'). As a result, a conversion over 95% of the FFAs of castor oil into esters with lubricants properties was achieved under optimized reaction conditions (15 wt% of biocatalyst content, 1:4 molar ratio (FFAs/alcohol), 30 °C, 180 rpm, 96 h). The substrates molar ratio had the highest influence on the dependent variable (conversion at 24 h). FFAs/2-ethyl-1-hexanol esters were characterized regarding the physicochemical and tribological properties. Interestingly, the modification of the FFAs with 2-ethyl-1-hexanol by ETL increased the oxidative stability of the FFAs feedstock from 0.18 h to 16.83 h. The biolubricants presented a lower friction coefficient than the reference commercial mineral lubricant (0.052 ± 0.07 against 0.078 ± 0.04). Under these conditions, ETL catalyzed the oligomerization of ricinoleic acid (a hydroxyl fatty acid) into estolides, reaching a conversion of 25.15% of the initial FFAs (for the first time)., We gratefully recognize the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spanish Government) (PID2022–136535OB-I00 and TED2021-131462B-I00). Rodolpho R. C. Monteiro thanks Programa de Formação de Recursos Humanos – Agência Nacional de Petróleo, Gás Natural e Biocombustíveis/Financiadora de Estudos e Projetos (PRH 31.1 – ANP/Finep)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Glutaraldehyde modification of lipases immobilized on octyl agarose beads: Roles of the support enzyme loading and chemical amination of the enzyme on the final enzyme features

  • Abellanas Perez, Pedro
  • Carballares Navarro, Diego
  • Fernandez Lafuente, Roberto
  • Rocha Martín, Javier
Lipase B from Candida antarctica (CALB) and lipase from Thermomyces lanuginosus (TLL) have been immobilized on octyl agarose at low loading and at a loading exceeding the maximum support capacity. Then, the enzymes have been treated with glutaraldehyde and inactivated at pH 7.0 in Tris-HCl, sodium phosphate and HEPES, giving different stabilities. Stabilization (depending on the buffer) of the highly loaded biocatalysts was found, very likely as a consequence of the detected intermolecular crosslinkings. This did not occur for the lowly loaded biocatalysts. Next, the enzymes were chemically aminated and then treated with glutaraldehyde. In the case of TLL, the intramolecular crosslinkings (visible by the apparent reduction of the protein size) increased enzyme stability of the lowly loaded biocatalysts, an effect that was further increased for the highly loaded biocatalysts due to intermolecular crosslinkings. Using CALB, the intramolecular crosslinkings were less intense, and the stabilization was lower, even though the intermolecular crosslinkings were quite intense for the highly loaded biocatalyst. The stabilization detected depended on the inactivation buffer. The interactions between enzyme loading and inactivating buffer on the effects of the chemical modifications suggest that the modification and inactivation studies must be performed under the target biocatalysts and conditions.