Pasar al contenido principal

ESTRATEGIAS DE VALORIZACION DE CO2 EMPLEANDO CATALIZADORES BIO Y NANOPOROSOS

PID2022-136321OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural Transition in the Growth of Copper Terephthalate Metal–Organic Frameworks: Understanding the Effect of the Synthetic Protocol and Its Impact on Electrochemical Behavior

  • Rodríguez, Sara L.
  • Ortega-Moreno, Gabriela A.
  • Sánchez Sánchez, Manuel
  • Fernández, José L.
  • Zamaro, Juan M.
Some copper-based metal–organic frameworks show promise for use as electrocatalysts because they allow for an electrode configuration in which copper species with redox and electron-conducting properties are immobilized in a three-dimensional arrangement. This work shows that the synthesis of copper terephthalates (Cu-BDCs) can lead to rigid structures of the copper hydroxyterephthalate-type or flexible structures that are isoreticular to the MOF-2 type, depending solely on the synthesis route. Here, a detailed analysis of the syntheses of the crystals is carried out employing protocols with different solvents as well as conventional or microwave-assisted solvothermal methods. All solids were fully characterized by a combination of characterization techniques, such as FE-SEM, T-XRD, TGA, and FTIR, and their electrochemical redox responses were also evaluated by cyclic voltammetry. A correlation between the Cu-BDCs structures and their electrochemical behaviors was established and a new version of an electroactive copper hydroxyterephthalate was synthesized by a microwave method in 3 h with a dimethylformamide-free protocol. This Cu-BDC was obtained as dispersed nanoflakes with a high amount of copper sites and the capacity to be reversibly electroreduced-oxidized and showed catalytic activity in the oxygen reduction reaction (ORR)., This work was supported by the Agencia Nacional de Promoción Científica y Tecnológica of Argentina (Project PICT 1880) and the Universidad Nacional del Litoral (Project CAI+D 00168LI). MSS acknowledges MCIN/AEI/10.13039/501100011033, European Union “NextGenerationEU”/PRTR (TED2021-131143B-I00), MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” (PID2022-136321OB-C21). The authors also wish to thank the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Synthesis of Zeolitic Imidazolate Frameworks at Room Temperature in Water with Exact Zn/Linker Stoichiometry

  • Molina Esquinas, Asunción
  • Rodríguez-Campa, Jorge
  • Flores-Borrell, Rosa
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
Zeolitic imidazolate frameworks (ZIFs) are widely used MOFs because of certain characteristics, but also because they can be prepared at room temperature using water as the unique solvent. However, these a priori sustainable conditions inevitably entail a huge and somehow unusable excess of linker. Here, we present the formation of ZIFs at room temperature in water, starting from mixtures with a linker/metal ratio of two, that is, coinciding with the stoichiometry found in the final MOFs, in the presence of amines. ZIF-8 can be prepared with triethylamine (TEA), giving a yield of Zn of 96.6%. Other bases, like NaOH, tetraethylammonium hydroxide or ammonium hydroxide, do not lead to ZIF-8 under the same conditions. The so-obtained ZIF-8 contains TEA inside its cavities, making it less porous than its conventionally prepared counterparts. Amine can be removed by mild thermal treatments (200–250 °C). Such thermal treatments induce the generation of g-C3N4-like species which could give added value to these materials as potential photocatalysts, increasing their affinity to CO2, as proved in this work. This methodology can be successfully extended to other amines, like N,N-dicyclohexylmethylamine, as well as to other prepared ZIFs, like Co-based ZIF-67, isostructural to ZIF-8., The authors acknowledge MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR funding through the project TED2021-131143B-I00. Grant PID2022-136321OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. M.A.M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of phosphorus desorption from soils using a modified DMT-HFAO technique and its relationship with phosphorus fractions and maize (Zea mays L.) yield

  • Ahmed, K.
  • Taddesse, A.M.
  • Dechassa, N.
  • Díaz Carretero, Isabel
This research investigated the kinetics of phosphorus (P) release from soils by employing an improved technique-hydrous ferric aluminium binary oxide in dialysis membrane tubes (DMT-HFAO). The as-synthesized adsorbents were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared (FTIR), thermogravimetic (TGA/DTA) and Brunauer-Emmett-Teller (BET) techniques. The modified method, DMT-HFAO, was used in six soils equilibrated for a period from 1 to 42 days. Two component first order model was applied to estimate the cumulative P desorbed and P desorption indices and how these parameters are related to maize yield. The cumulative P-extracted by DMT-HFAO over 42 days significantly correlated (p < 0.01) with maize plant uptake; better than the reference single system (DMT-HFO). This indicated that DMT-HFAO is superior in mimicking plant mode of action as compared to the benchmark, DMT-HFO. Among the P fractions, HCO3-Pi, HCO3-Po and D/HCl significantly correlated with the yield parameters in both techniques. Our findings, therefore, provide some insights on the importance of this modified technique in estimating the residual P in soil. Accurate estimation of residual P is important not only from environmental perspective but also from the judicious use of this non-renewable fertilizer. © 2023 The Authors, The authors thank Haramaya University for providing a financial grant for the research (HURG-2016-03-02 and HURG-2020–03–02–75). I.D. acknowledges funding from PID2022-136321OB-C21, MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR through the project TED2021-131143B-I00., Appendix A. Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe-Al binary composite filled dialysis membrane tubes (DMT-HFAO): a modified method for assessment of phosphate desorption from aqueous and soil solutions

  • Kassim, A.
  • Taddesse, A.M.
  • Nigussie, D.
  • Díaz Carretero, Isabel
  • Habib, N.R.
Phosphorus (P) limits plant growth particularly in strongly acidic soils due to P fixation. P availability to a plant is a functional concept of time rather than a measurable quantity. Therefore, a method that can estimate P availability over time is required. This research work was intended to synthesize a nanocomposite material that can monitor soil P desorption kinetics. To this effect, a binary sorbent system filled in a dialysis membrane tube was developed. Accordingly, calcined and amorphous powder samples of Fe-Al binary mixed oxides were synthesized by a gel-evaporation method and characterized by XRD, FTIR, TGA-DTA, SEM-EDX and BET techniques. The performance, as a phosphate sink, of crystalline hydrous ferric aluminum oxide (HFAO) and hydrous amorphous ferric aluminum oxide (HAFAO) each filled in a dialysis membrane tube (DMT) was evaluated. A single hydrated ferric oxide (HFO) suspension filled in dialysis membrane tubes (DMT) designated DMT-HFO was used as a benchmark. For the aqueous system, the sorption capacity of the DMT-HFAO was found to be 260% (mg mg−1 phosphate) whereas the amorphous congener (DMT-HAFAO) was approximately 200% (mg mg−1 phosphate) times that of DMT-HFO during the 24 h equilibration. For the soil solution system, the phosphate desorbed by the DMT-HFAO was about 520% (mg mg−1 phosphate) compared with a single system, DMT-HFO, in 168 h. For the desorption experiment carried out with soil solution, the data fitted fairly well with first order kinetics for both sorbents (R2 = 0.946-0.998), the amount adsorbed by DMT-HFAO being greater than DMT-HFO. The soil data fitted an intra-particle diffusion model fairly well for both sorbents (R2 = 0.98-0.992) with rate constants, kp, following the order: DMT-HFAO > DMT-HAFAO > DMT-HFO. The DMT-HFAO approach also showed better fit to the two component first order model (R2 = 0.994 & 0.997) indicating that the modified method has promising potential for a long-term phosphate desorption kinetics study from soil, the implication of which is important both from agricultural and environmental perspectives. However, correlation of the P adsorbed by this sink method with actual plant P uptake in various soils should be carried out to validate the universality of this technique. © 2023 The Royal Society of Chemistry., The authors thank SIDA and the Research and Extension Office of Haramaya University for providing the financial grant for the research (HURG-2014-03-03, HURG-2016-03-02 and HURG-2020-03-02-75). I. D. acknowledges funding from PID2022-136321OB-C21, MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR through the project TED2021-131143B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic synthesis of Hydroxytyrosol from Oleuropein for valorization of an agricultural waste

  • García-Molina, Gabriel
  • Peters, Eduard
  • Palmeri, Rosa
  • Awoke, Yaregal
  • Márquez Álvarez, Carlos
  • Blanco Martín, Rosa María
Oleuropein (OP) is an appreciated compound present not only in fruits but also in leaves of olive trees, which can be transformed into hydroxytyrosol (HT), a substance with high antioxidant activity. In this work, the transformation of an agricultural residue containing OP (olive leaves or wastewater from mills) to the high added value compound HT is accomplished through different enzymatic strategies. Different enzymes were used, immobilized on various supports by diverse binding forces: beta-glucosidase encapsulated in siliceous material, esterases and lipases immobilized on hydrophobic supports (octyl-functionalized amorphous silica and periodic mesoporous organosilica), and esterase immobilized on amine-functionalized ordered mesoporous silica. All these biocatalysts were tested for oleuropein hydrolysis through two different reaction approaches: a) split of glucosidic bond catalyzed by beta-glucosidase (β-glu), followed by hydrolysis of the aglycon and further ester hydrolysis. 5 mg·mL−1 of β-glu fully hydrolyzed 5 mM OP at pH 7 and 50°C in 7 days, and further enzymatic hydrolysis of the aglycon yielded near to 0.5 mM HT in the best conditions tested. b) via direct hydrolysis of the ester bond to produce hydroxytyrosol in a one-step reaction using esterases or lipases. The latter reaction pathway catalyzed by lipase from Penicillium camemberti immobilized on octyl-silica (4 mg·mL−1) at 35°C and pH 6 directly produced 6.8 mM HT (1 mg·mL−1), transforming in 12 days near to 30% of the initial 25 mM OP from a commercial olive leaves extract. © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group., This work has been financed by the following sponsors and projects: Spanish State Research Agency (Agencia Española de Investigación, AEI, MCIN/AEI/10.13039/501100011033); Ministerio de Ciencia e Innovación PID2022-136321OB-C21; European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project PID2019-107968RB-I00; Spanish Consejo Superior de Investigaciones Científicas COOPB2202, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks for enzyme immobilization and nanozymes: A laccase-focused review

  • Alvarado-Ramírez, Lynette
  • Machorro-García, Gerson
  • López-Legarrea, Andrea
  • Trejo-Ayala, Dulce
  • Rostro-Alanis, Magdalena D.J.
  • Sánchez Sánchez, Manuel
  • Blanco Martín, Rosa María
  • Rodríguez-Rodríguez, José
  • Parra-Saldívar, Roberto
Laccases are natural catalysts with remarkable catalytic activity. However, their application is limited by their lack of stability. Metal-organic frameworks (MOFs) have emerged as a promising alternative for enzyme immobilization. Enzymes can be immobilized in MOFs via two approaches: postsynthetic immobilization and in situ immobilization. In postsynthetic immobilization, an enzyme is embedded after MOF formation by covalent interactions or adsorption. In contrast, in in situ immobilization, a MOF is formed in the presence of an enzyme. Additionally, MOFs have exhibited intrinsic enzyme-like activity. These materials, known as nanozymes when they have the ability to replace enzymes in certain catalytic processes, have multiple key advantages, such as low cost, easy preparation, and large surface areas. This review presents a general overview of the most recent advances in both enzyme@MOF biocatalysts and MOF-based nanozymes in different applications, with a focus on laccase, which is one of the most widely investigated enzymes with excellent industrial potential. © 2023, Research was sponsored by the ARO and was accomplished under Grant Number: W911NF-211-0311. The views and conclusions contained in this document are those of the authors and should not be interpreted as representing the official policies, either expressed or implied, of ARO or the U.S. Government. The U.S. Government is authorized to reproduce and distribute reprints for Government purposes notwithstanding any copyright notation herein. The PhD scholarship awarded by Consejo Nacional de Ciencia y Tecnología (CONACYT), Mexico to L. Alvarado-Ramírez (486638) is thankfully acknowledged. We are also thankful to “Programa Iberoamericano de Ciencia y Tecnología para el Desarrollo” in the Latin American development network “Lacasas Inmovilizadas para la Degradaci´on de Compuestos Arom´aticos en Aguas Residuales” (LIDA, project 318RT0552). All listed authors are also grateful to their representative universities for providing literature access. R.M. Blanco and M. S´anchez-S´anchez acknowledge (i) MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR the funding through the project TED2021-131143B-I00; and (ii) MCIN/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe" for the project PID2022- 136321OB-C21. Figs. 1–4 were created with BioRender.com, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced photocatalytic performance of rGO/UiO-66(Zr)/Ag3PO4 composite for degradation of methyl orange (MO) under visible light irradiation

  • Hadush, Abriha
  • Kebede, Tesfahun
  • Taddesse, Abi M.
  • Habib, Nejat R.
  • Sánchez Sánchez, Manuel
Industries like textile, plastic, pulp, and paper produce dye-containing waste waters that have harmful effect on the environment as well as human health. This work presents a series of binary and ternary composites formed by reduced graphene oxide (rGO), silver phosphate (Ag3PO4) and the nanocrystalline MOF, UiO-66(Zr). The composites exhibit the best of their catalytic features to achieve efficient photocatalysis to remove the model dye methyl orange (MO) from aqueous solution as well as dyes from a real industrial wastewater effluent. The composites were prepared under sustainable conditions, at room temperature. XRD characterization shows that the prepared MOF is one of the most nanocrystalline reported UiO-66(Zr), becoming even more nanocrystalline in the composite formation. Different physicochemical characterization techniques indicated the existence of such interaction. Thus, DRS-UV-vis spectroscopy makes clear the reduction of the band-gap of the composites compared with the individual components; the band intensity of the photoluminescence (PL) spectra is substantially reduced in composites, confirming the diminution of electron-hole recombination; and electrochemical impedance spectroscopy (EIS) shows that the electrodes modified with ternary composites present faster electron transfer ability. The selected composite rGO/UiO-66(Zr)/Ag3PO4 exhibits high efficiency on the photodegradation of the model MO dye compared to the binary and single counterparts. It could be attributed to its high surface area, enhanced visible light absorption, efficient charge transfer process, as well as the synergetic effect between its components. A degradation mechanism is proposed based on the estimated band-gaps and on the scavenging study with strategically-chosen species., The authors acknowledge the Spanish Research Council CSIC for funding through the projects (i-COOP+2018) COOPA20271 and (i-COOP+2022) COOPB22002. MSS acknowledges MCIN/AEI and European Union “NextGenerationEU”/PRTR the funding through the projects TED2021-131143B-I00 and PID2022-136321OB-C21. Abi M Taddesse acknowledges the financial support from HU (HURG-2016-03-02 and HURG_2020_03_02_75) and the travel support received from ACE for Climate SABC, Haramaya University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper-loaded sustainable MOFs as photocatalysts for dye removal

  • Redwan Habib, Nejat
  • Taddesse, Abi M.
  • Sainz, Raquel
  • Sánchez Sánchez, Manuel
  • Díaz Carretero, Isabel
This work presents the effect of Cu loading, using incipient wetness impregnation method, on sustainably synthesized MIL-100(Fe), NH2-MIL-53(Al), Zr-BDC and NH2-Zr-BDC MOFs and their photocatalytic removal efficiency on target dye, rhodamine B (RhB), from aqueous solutions. Several Cu ratios have been tested, finding that 2 wt% of Cu load becomes optimum in terms of metal distribution and catalytic performance. Powder X-ray diffraction patterns (XRD) showed no difference from the parent supports in the case of MIL-100(Fe), NH2-MIL-53(Al) and Zr-BDC, whereas extra peaks are induced by Cu impregnation in NH2-Zr-BDC. In addition, several techniques indicate that Cu strongly interacts with the MOF in Cu@NH2-Zr-BDC, exhibiting the lowest bandgap of the series, the lowest photoluminescence intensity and a notable predominance of Cu in the oxidation state 2+. The above evidences lead Cu@NH2-Zr-BDC to behave as the most effective catalyst in the removal of RhB, reaching removal efficiency as high as 93 %, being able to efficiently and selectively remove basic dyes from mixed samples, such as RhB and MB, but not for acidic dyes like MO, and also showing a very good performance (46 % photodegradation) in real waste water from Hawassa textile factory, in Ethiopia. Moreover, this catalyst can be recycled 3 times by simple washing and drying. Scavengers test suggested that h+ is the most active species in the photocatalytic degradation., The authors acknowledge MCIN/AEI and European Union “NextGenerationEU”/PRTR the funding through the projects TED2021-131143B-I00, and PID2022-136321OB-C21. The authors also acknowledge CSIC for the I-COOPA-2019 (COOPA20376) and COOPB22002. Haramaya University is also acknowledged for the local fund granted through the project (HURG-2020–03–02–75, Ethiopia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural zeolite supported g-C3N4/ZnO/Ag3PO4 composite: A tandem n-n heterojunction for simultaneous photodegradation of dyes under visible and solar irradiation

  • Bezu, Zewdu
  • Taddesse, Abi M.
  • Díaz Carretero, Isabel
Various zinc-based ternary composite photocatalysts with variable weight percent ratios of g-C3N4:ZnO/Ag3PO4 in pristine and natural zeolite supported form were prepared using precipitation and solid-state methods, respectively. X-ray diffraction (XRD), Brunauer, Emmett, and Teller (BET), Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDX), Thermogravimetric analysis (TGA/DTA), Fourier Transform Infrared (FTIR), Ultraviolet–Visible Diffuse Reflectance (UV–Vis DRS), and Photoluminescence (PL) techniques were used to investigate the as-produced composites. The photocatalytic efficacy of the developed materials was studied considering methyl orange dye (MeO) and laboratory-prepared mixed dyes as target pollutants. The photodegradation (MeO) performance of the natural zeolite-supported (NZGZA-1) ternary system was found to be 87.1% under optimal working circumstances. The primary active species engaged in MeO decolorization were the holes. The photodegradation efficiency under outdoor experiment yielded 98.2 and 78.9 %, for MeO and mixture of dyes respectively. After five consecutive cycles, the reusability of the supported catalyst was examined, and a 47.2 % decline was recorded at the end of the fifth cycle showing the fairly well stability of the catalyst. The photocatalytic degradation of the studied model pollutant follows pseudo-1st-order kinetics. The present work evidenced beneficial use of natural zeolite as support to ternary photocatalyst systems with enhanced efficiency apart from meeting the criteria for circular economy. Thus, reusing of spent natural zeolite as a support for composite photocatalysts could be considered viable alternative to disposing the same to the environment., The authors would like to thank the Spanish Agency for International Development Cooperation AECID INNOVACION (2020/ACDE/000373) and Haramaya University for their support (HURG-2020-03-02-75). I.D. acknowledges funding from PID2022-136321OB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CdS/g-C3N4/Sm-BDC MOF nanocomposite modified glassy carbon electrodes as a highly sensitive electrochemical sensor for malathion

  • Yassin, Jemal M.
  • Taddesse, Abi M.
  • Tsegaye, Abebaw A.
  • Sánchez Sánchez, Manuel
Malathion is an organophosphate pesticide widely used in agriculture, whose elimination is highly demanded by society. This work faces this challenge by the development of a novel electrochemical sensor via modifying a glassy carbon electrode (GCE) with sustainable Sm-BDC MOFs and their corresponding novel binary and ternary composites combined with CdS and g-C3N4 for the detection of malathion. Different characterization techniques indicate the successful synthesis of desired composite materials, with notable interaction between the individual components. CdS-Sm-BDC-g-C3N4-5 wt% modified electrode exhibited higher peak current than the bare GCE, with excellent electrocatalytic ability to oxidize malathion, due to its higher conductivity, catalytic effect and synergistic effects between CdS, g-C3N4 and Sm-BDC. Under optimized condition, differential pulse voltammograms (DPV) demonstrate that the oxidation peak current was proportional to its concentration in the range of 3.0·10−8–15.0·10−8 M (R2 = 0.996), with high sensitivity (25 μAμM−1) and low detection limit (7.4·10−9 M or 7.4 μmM). In addition, the modified electrode affirms good stability and reproducibility, making it simple, cost effective with high sensitivity and selectivity. The results confirmed that making a composite is a key strategy for improving the physicochemical properties of MOFs and that modifying electrode surfaces with novel composites can enhance the detection of organophosphate pesticide., The authors acknowledge the Spanish Research Council CSIC for funding through the projects COOPA20271 and COOPB22002. This research work was financially supported by Haramaya University (HURG-2020-03-02-75) and Debre Berhan University. MSS acknowledge the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR, and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Semicrystalline/Nanocrystalline UiO-66-Type Zr-MOFs as Photodegraders of Rhodamine B

  • Yassin, Jemal M.
  • Taddesse, Abi M.
  • Sánchez Sánchez, Manuel
UiO-type Zr-BDC MOFs have garnered the interest of the scientific community due to their exceptional diversity in composition, structure, and chemical environment, as well as their high thermal and chemical stabilities. This work demonstrates the sustainable synthesis of a series of nanocrystalline/semicrystalline UiO-66(Zr) metal–organic frameworks (MOFs) under facile conditions—specifically at room temperature, in water, with high yield, and without the use of modulators or toxic byproducts. The synthesis involves either deprotonating the linker or utilizing various ratios of water and DMF as solvents. The as-prepared materials obtained from both synthesis strategies share key structural features with conventional UiO-66(Zr) in their short- and medium-range physicochemical properties, while exhibiting significant differences in crystallinity and textural properties. Nonetheless, the materials generally lack long-range order (semicrystalline), in particular these synthesized following the deprotonation strategy. However, the materials prepared using mixed solvent strategy seem to exhibit characteristics of nanocrystalline UiO-66(Zr). Overall, both approaches successfully addressed various synthesis challenges related to the highly sought-after Zr-based metal–organic frameworks (MOFs). Some of these MOF materials were tested for the photodegradation of rhodamine B (RhB) under mercury light irradiation, evidencing high photocatalytic efficiency of up to 75 ± 0.078% within 120 min under the pseudo-first-order model. This suggests an interaction between the photocatalyst and the RhB dye, involving electron injection from RhB and the ability for ligand-to-metal charge transfer (LMCT), which enhances the efficient photocatalytic degradation of RhB. The trapping experiments indicated that superoxide radicals (•O2−) and photogenerated holes (h+) are crucial in the photodegradation of RhB. Moreover, the materials showed good recyclability across five tested cycles. A plausible photocatalytic reaction mechanism has been proposed to explain these findings., The authors acknowledge the Spanish Research Council CSIC for funding through the projects COOPB22002 and COOPB24072. This research work was also financially supported by Haramaya University (HURG-2020-03-02-75, Ethiopia) and Debre Berhan University. MSS acknowledges the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Díaz Carretero, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability., The authors acknowledge the grant PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, EU and to the PID2022-136535OB-100 grant; to the CSIC for the COOPA20271, COOPB22002, and COOPB24072 grants, as well as research grants (HURG-2016-03-02 and HURG-2020-03-02-75) received from Ministry of Education through office of the Research and Extension, Haramaya University. AM acknowledges the Spanish Ministry of Science (RYC2018-024561-I and to the European Union NextGeneration EU/PTR; CNS2023-144346), the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and the support by Aragon Government ( E13_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Batch and continuous flow elimination of BPA with one-pot synthetized laccase@NH2-MIL-53(Al)

  • Molina, M. Asunción
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
  • Meneses-Jácome, A.
Despite recent restrictions on its use, bisphenol A (BPA) continues to be present in wastewater, posing significant health risks that require effective removal methods. Several strategies have been proposed to address this issue, with batch reactors being the most widely used approach. However, scaling up removal systems to continuous flow conditions is essential for practical application in real-world wastewater treatment. This study presents a BPA removal system utilizing a packed bed reactor (PBR) with supported enzymatic catalyst. In previous research, we demonstrated that the laccase@NH2-MIL-53(Al) catalyst was highly effective in degrading BPA in a batch reactor, thanks to its high enzyme loading and minimal enzyme leaching. The system achieved over 80 % removal efficiency along five reaction cycles, operating faster than free enzyme systems. In this work, we extend the application of this catalyst to continuous flow conditions in a PBR, achieving superior removal efficiencies compared to batch processes. Under continuous flow, the biocatalyst maintained over 90 % BPA removal for extended periods, even at higher contaminant concentrations than typical in environment. The system exhibited remarkable stability with no diffusional limitations, suggesting high substrate accessibility to the enzyme. Additionally, chemical oxygen demand (COD) analyses of treated samples showed minimal increases, reinforcing the environmental compatibility and efficiency of the system. These findings highlight the potential of MOF-supported laccase for industrial applications in wastewater treatment, offering a scalable and sustainable solution for BPA degradation., This work has been financed by CSIC (2019AEP076 and COOPB22002). M.A.M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077 and UAM for Ph.D. Program in Applied Chemistry. A.M. acknowledges support from COOPB20377 for his stay at the ICP-CSIC. The authors acknowledge the CYTED-LIDA network and the SAB group of ITESM. The authors acknowledge the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR, and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of ZSM-5 from natural mordenite from Spain

  • Awoke, Yaregal
  • Sánchez Sánchez, Manuel
  • Arnaiz, Itziar
  • Díaz Carretero, Isabel
Data will be made available on request., Zeolite ZSM-5 has been synthesized using natural mordenite sourced from the San José-Los Escullos-Cabo de Gata deposit in southeast of Spain. The final pure ZSM-5 was achieved without the need of calcination of the natural mordenite through an inter-zeolite transformation being the adjustment of the Si/Al ratio the key factor. The Si/Al ratio of the natural mordenite was modified through two main methods: (i) dealumination under acidic conditions and (ii) the addition of an extra silica source. Dealumination process adds the advantage of eliminating the impurities present in the initial natural mordenite. ZSM-5 with over 88 % crystallinity was produced under hydrothermal synthesis conditions at 190 °C for 48 h using NH4OH as the alkalinity source with coffin shape particles showing short b-axis ranging from 90 to 200 nm. Similarly, ZSM-5 with over 78 % crystallinity was obtained with NaOH as the alkalinity source at 190 °C for 48 h, however, the particles are irregular-shaped of around 160–260 nm in size. In the second approach, despite the presence of impurities of Fe, highly crystalline (over 100 % crystallinity) ZSM-5 is produced, once again with well-shaped coffin shaped crystals using NH4OH yet larger, with a b-axis ranging from 200 to 300 nm and irregular shaped ZSM-5 using NaOH., The authors acknowledge funding from MCIN/AEI grant code: PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, EU. CSIC is also acknowledged through an iCOOP call i-COOPB22002. We acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iron(III) modified glassy carbon electrode for adsorption stripping voltammetric detection of uric acid

  • Mehretie, Solomon
  • Losada, José
  • Admassie, Shimelis
  • Tessema, Merid
  • Solomon, Theodros
  • Díaz Carretero, Isabel
A ferric-doped zeolite-modified electrode was fabricated for the determination of uric acid. The ferric-doped zeolite was responsible for the electrocatalytic oxidation of uric acid in a buffer solution (pH 4.6). The analytical performance of the ferric-doped zeolite modified electrode was evaluated using adsorption stripping square wave voltammetry. A linear anodic response for uric acid in the concentration range 0.6 – 60.0 µM, a detection limit of 0.23 µM, and a sensitivity of 0.64 µA/µM were obtained. Finally, the proposed method was used for the determination of uric acid in a urine sample, and hence it has potential application for clinical samples., The authors acknowledge funding from the International Science Program, Uppsala University, Sweden and MCIN/AEI grant code: PID2022-136321OB-C21/ AEI/10.13039/501100011033/ FEDER, UE. CSIC COOPB24072 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Post-Synthesis Surfactant-Induced Mesoporosity in Zeolite Crystals: State-of-the-Art, Open Questions and Perspectives

  • Pérez-Pariente, Joaquín
  • Sánchez Sánchez, Manuel
  • Aguilar Pliego, Julia
In this chapter, the state-of-the-art on the generation of intracrystalline mesopores in zeolite crystals by post-synthesis treatments with cationic surfactants in alkaline medium is critically reviewed. So far, five 12R large pore FAU, BEA, MAZ, LTL and MOR, and one medium pore 10R MFI zeolites have been subjected to this treatment. The main aspects of the process and the chemical and structural factors of the parent zeolites that trigger the mesostructuring process have been thoroughly examined. Particular attention has also been paid to discuss the influence of the treatment on the total acidity and acid strength of the resulting materials. Finally, some general considerations have been elaborated to serve as guidelines for future work, with the aim of helping to develop the most suitable materials for specific catalytic processes. © 2025 by IGI Global Scientific Publishing. All rights reserved., The authors acknowledge funding from MCIN/AEI grant code: PID2022- 136321OB- C21/AEI/10.13039/501100011033/FEDER, EU, as well as the project: PID2022-138481NB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selected sustainably synthesized metal–organic frameworks for hydrogen and carbon dioxide storage

  • Habib, Nejat Redwan
  • Díaz Carretero, Isabel
  • Taddesse, Abi M.
  • Langmi, Henrietta W.
Selected metal–organic frameworks (MOFs) including Al–MIL-53–NH2, Fe–MIL-100, Zr–BDC and Zr–BDC–NH2 were synthesized via a sustainable approach and tested for hydrogen and carbon dioxide storage. The synthesis was conducted at room temperature in the presence of water acting as a solvent. Crystalline Fe–MIL-100, nanocrystalline Al–MIL-53–NH2, and semi-crystalline Zr–BDC and Zr–BDC–NH2 were formed as confirmed by powder X-ray diffraction. Fourier transform infrared spectroscopy further confirmed the successful metal–ligand coordination in the MOFs. Thermogravimetric analysis shows that Zr–BDC was the most stable among the synthesized MOFs as it started to decompose above 500 °C. Morphological evaluation using field emission scanning electron microscopy reveals that Fe–MIL-100 consisted of octahedral-shaped crystals while Al–MIL-53–NH2, Zr–BDC and Zr–BDC–NH2 manifested as agglomerated particles. The agglomeration, further validated by transmission electron microscopy, results from the clustering of nanocrystals or small particles. This occurs due to the rapid formation of the precipitate during the room-temperature synthesis, where water serves as the solvent for the specified MOFs. The highest Brunauer–Emmett–Teller (BET) surface area (2013 m2 g−1), determined from nitrogen sorption, was recorded for Fe–MIL-100. Accordingly, Fe–MIL-100 exhibited the highest H2 uptake (1.0 wt% at 77 K and 1 bar) and CO2 storage (8.5 wt% at 298 K and 1 bar). This study illustrates the potential of certain sustainably produced MOFs for gas storage applications. Sustainably prepared MOFs provide the benefit of scalable synthesis suitable for industrial production by reducing reaction times and employing environmentally friendly solvents. This journal is © The Royal Society of Chemistry, 2026, We thank the Department of Science, Technology and Innovation (DSTI) and the National Research Foundation (NRF) South African Research Chairs Initiative (SARChI) (Grant Number: 2090155358). The NRF CPRR funding stream (Grant Number: 0215586378) is also acknowledged. NRH acknowledges the University of Pretoria for post-doctoral researcher funding. ID acknowledges funding from the MCIN/AEI under grant code: PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, UE. This research work was also financially supported by Haramaya University (HURG-2020-03-02-75), Ethiopia., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Diaz, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability.