Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural Transition in the Growth of Copper Terephthalate Metal–Organic Frameworks: Understanding the Effect of the Synthetic Protocol and Its Impact on Electrochemical Behavior

  • Rodríguez, Sara L.
  • Ortega-Moreno, Gabriela A.
  • Sánchez Sánchez, Manuel
  • Fernández, José L.
  • Zamaro, Juan M.
Some copper-based metal–organic frameworks show promise for use as electrocatalysts because they allow for an electrode configuration in which copper species with redox and electron-conducting properties are immobilized in a three-dimensional arrangement. This work shows that the synthesis of copper terephthalates (Cu-BDCs) can lead to rigid structures of the copper hydroxyterephthalate-type or flexible structures that are isoreticular to the MOF-2 type, depending solely on the synthesis route. Here, a detailed analysis of the syntheses of the crystals is carried out employing protocols with different solvents as well as conventional or microwave-assisted solvothermal methods. All solids were fully characterized by a combination of characterization techniques, such as FE-SEM, T-XRD, TGA, and FTIR, and their electrochemical redox responses were also evaluated by cyclic voltammetry. A correlation between the Cu-BDCs structures and their electrochemical behaviors was established and a new version of an electroactive copper hydroxyterephthalate was synthesized by a microwave method in 3 h with a dimethylformamide-free protocol. This Cu-BDC was obtained as dispersed nanoflakes with a high amount of copper sites and the capacity to be reversibly electroreduced-oxidized and showed catalytic activity in the oxygen reduction reaction (ORR)., This work was supported by the Agencia Nacional de Promoción Científica y Tecnológica of Argentina (Project PICT 1880) and the Universidad Nacional del Litoral (Project CAI+D 00168LI). MSS acknowledges MCIN/AEI/10.13039/501100011033, European Union “NextGenerationEU”/PRTR (TED2021-131143B-I00), MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” (PID2022-136321OB-C21). The authors also wish to thank the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Synthesis of Zeolitic Imidazolate Frameworks at Room Temperature in Water with Exact Zn/Linker Stoichiometry

  • Molina Esquinas, Asunción
  • Rodríguez-Campa, Jorge
  • Flores-Borrell, Rosa
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
Zeolitic imidazolate frameworks (ZIFs) are widely used MOFs because of certain characteristics, but also because they can be prepared at room temperature using water as the unique solvent. However, these a priori sustainable conditions inevitably entail a huge and somehow unusable excess of linker. Here, we present the formation of ZIFs at room temperature in water, starting from mixtures with a linker/metal ratio of two, that is, coinciding with the stoichiometry found in the final MOFs, in the presence of amines. ZIF-8 can be prepared with triethylamine (TEA), giving a yield of Zn of 96.6%. Other bases, like NaOH, tetraethylammonium hydroxide or ammonium hydroxide, do not lead to ZIF-8 under the same conditions. The so-obtained ZIF-8 contains TEA inside its cavities, making it less porous than its conventionally prepared counterparts. Amine can be removed by mild thermal treatments (200–250 °C). Such thermal treatments induce the generation of g-C3N4-like species which could give added value to these materials as potential photocatalysts, increasing their affinity to CO2, as proved in this work. This methodology can be successfully extended to other amines, like N,N-dicyclohexylmethylamine, as well as to other prepared ZIFs, like Co-based ZIF-67, isostructural to ZIF-8., The authors acknowledge MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR funding through the project TED2021-131143B-I00. Grant PID2022-136321OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. M.A.M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced photocatalytic performance of rGO/UiO-66(Zr)/Ag3PO4 composite for degradation of methyl orange (MO) under visible light irradiation

  • Hadush, Abriha
  • Kebede, Tesfahun
  • Taddesse, Abi M.
  • Habib, Nejat R.
  • Sánchez Sánchez, Manuel
Industries like textile, plastic, pulp, and paper produce dye-containing waste waters that have harmful effect on the environment as well as human health. This work presents a series of binary and ternary composites formed by reduced graphene oxide (rGO), silver phosphate (Ag3PO4) and the nanocrystalline MOF, UiO-66(Zr). The composites exhibit the best of their catalytic features to achieve efficient photocatalysis to remove the model dye methyl orange (MO) from aqueous solution as well as dyes from a real industrial wastewater effluent. The composites were prepared under sustainable conditions, at room temperature. XRD characterization shows that the prepared MOF is one of the most nanocrystalline reported UiO-66(Zr), becoming even more nanocrystalline in the composite formation. Different physicochemical characterization techniques indicated the existence of such interaction. Thus, DRS-UV-vis spectroscopy makes clear the reduction of the band-gap of the composites compared with the individual components; the band intensity of the photoluminescence (PL) spectra is substantially reduced in composites, confirming the diminution of electron-hole recombination; and electrochemical impedance spectroscopy (EIS) shows that the electrodes modified with ternary composites present faster electron transfer ability. The selected composite rGO/UiO-66(Zr)/Ag3PO4 exhibits high efficiency on the photodegradation of the model MO dye compared to the binary and single counterparts. It could be attributed to its high surface area, enhanced visible light absorption, efficient charge transfer process, as well as the synergetic effect between its components. A degradation mechanism is proposed based on the estimated band-gaps and on the scavenging study with strategically-chosen species., The authors acknowledge the Spanish Research Council CSIC for funding through the projects (i-COOP+2018) COOPA20271 and (i-COOP+2022) COOPB22002. MSS acknowledges MCIN/AEI and European Union “NextGenerationEU”/PRTR the funding through the projects TED2021-131143B-I00 and PID2022-136321OB-C21. Abi M Taddesse acknowledges the financial support from HU (HURG-2016-03-02 and HURG_2020_03_02_75) and the travel support received from ACE for Climate SABC, Haramaya University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper-loaded sustainable MOFs as photocatalysts for dye removal

  • Redwan Habib, Nejat
  • Taddesse, Abi M.
  • Sainz, Raquel
  • Sánchez Sánchez, Manuel
  • Díaz Carretero, Isabel
This work presents the effect of Cu loading, using incipient wetness impregnation method, on sustainably synthesized MIL-100(Fe), NH2-MIL-53(Al), Zr-BDC and NH2-Zr-BDC MOFs and their photocatalytic removal efficiency on target dye, rhodamine B (RhB), from aqueous solutions. Several Cu ratios have been tested, finding that 2 wt% of Cu load becomes optimum in terms of metal distribution and catalytic performance. Powder X-ray diffraction patterns (XRD) showed no difference from the parent supports in the case of MIL-100(Fe), NH2-MIL-53(Al) and Zr-BDC, whereas extra peaks are induced by Cu impregnation in NH2-Zr-BDC. In addition, several techniques indicate that Cu strongly interacts with the MOF in Cu@NH2-Zr-BDC, exhibiting the lowest bandgap of the series, the lowest photoluminescence intensity and a notable predominance of Cu in the oxidation state 2+. The above evidences lead Cu@NH2-Zr-BDC to behave as the most effective catalyst in the removal of RhB, reaching removal efficiency as high as 93 %, being able to efficiently and selectively remove basic dyes from mixed samples, such as RhB and MB, but not for acidic dyes like MO, and also showing a very good performance (46 % photodegradation) in real waste water from Hawassa textile factory, in Ethiopia. Moreover, this catalyst can be recycled 3 times by simple washing and drying. Scavengers test suggested that h+ is the most active species in the photocatalytic degradation., The authors acknowledge MCIN/AEI and European Union “NextGenerationEU”/PRTR the funding through the projects TED2021-131143B-I00, and PID2022-136321OB-C21. The authors also acknowledge CSIC for the I-COOPA-2019 (COOPA20376) and COOPB22002. Haramaya University is also acknowledged for the local fund granted through the project (HURG-2020–03–02–75, Ethiopia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CdS/g-C3N4/Sm-BDC MOF nanocomposite modified glassy carbon electrodes as a highly sensitive electrochemical sensor for malathion

  • Yassin, Jemal M.
  • Taddesse, Abi M.
  • Tsegaye, Abebaw A.
  • Sánchez Sánchez, Manuel
Malathion is an organophosphate pesticide widely used in agriculture, whose elimination is highly demanded by society. This work faces this challenge by the development of a novel electrochemical sensor via modifying a glassy carbon electrode (GCE) with sustainable Sm-BDC MOFs and their corresponding novel binary and ternary composites combined with CdS and g-C3N4 for the detection of malathion. Different characterization techniques indicate the successful synthesis of desired composite materials, with notable interaction between the individual components. CdS-Sm-BDC-g-C3N4-5 wt% modified electrode exhibited higher peak current than the bare GCE, with excellent electrocatalytic ability to oxidize malathion, due to its higher conductivity, catalytic effect and synergistic effects between CdS, g-C3N4 and Sm-BDC. Under optimized condition, differential pulse voltammograms (DPV) demonstrate that the oxidation peak current was proportional to its concentration in the range of 3.0·10−8–15.0·10−8 M (R2 = 0.996), with high sensitivity (25 μAμM−1) and low detection limit (7.4·10−9 M or 7.4 μmM). In addition, the modified electrode affirms good stability and reproducibility, making it simple, cost effective with high sensitivity and selectivity. The results confirmed that making a composite is a key strategy for improving the physicochemical properties of MOFs and that modifying electrode surfaces with novel composites can enhance the detection of organophosphate pesticide., The authors acknowledge the Spanish Research Council CSIC for funding through the projects COOPA20271 and COOPB22002. This research work was financially supported by Haramaya University (HURG-2020-03-02-75) and Debre Berhan University. MSS acknowledge the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR, and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Semicrystalline/Nanocrystalline UiO-66-Type Zr-MOFs as Photodegraders of Rhodamine B

  • Yassin, Jemal M.
  • Taddesse, Abi M.
  • Sánchez Sánchez, Manuel
UiO-type Zr-BDC MOFs have garnered the interest of the scientific community due to their exceptional diversity in composition, structure, and chemical environment, as well as their high thermal and chemical stabilities. This work demonstrates the sustainable synthesis of a series of nanocrystalline/semicrystalline UiO-66(Zr) metal–organic frameworks (MOFs) under facile conditions—specifically at room temperature, in water, with high yield, and without the use of modulators or toxic byproducts. The synthesis involves either deprotonating the linker or utilizing various ratios of water and DMF as solvents. The as-prepared materials obtained from both synthesis strategies share key structural features with conventional UiO-66(Zr) in their short- and medium-range physicochemical properties, while exhibiting significant differences in crystallinity and textural properties. Nonetheless, the materials generally lack long-range order (semicrystalline), in particular these synthesized following the deprotonation strategy. However, the materials prepared using mixed solvent strategy seem to exhibit characteristics of nanocrystalline UiO-66(Zr). Overall, both approaches successfully addressed various synthesis challenges related to the highly sought-after Zr-based metal–organic frameworks (MOFs). Some of these MOF materials were tested for the photodegradation of rhodamine B (RhB) under mercury light irradiation, evidencing high photocatalytic efficiency of up to 75 ± 0.078% within 120 min under the pseudo-first-order model. This suggests an interaction between the photocatalyst and the RhB dye, involving electron injection from RhB and the ability for ligand-to-metal charge transfer (LMCT), which enhances the efficient photocatalytic degradation of RhB. The trapping experiments indicated that superoxide radicals (•O2−) and photogenerated holes (h+) are crucial in the photodegradation of RhB. Moreover, the materials showed good recyclability across five tested cycles. A plausible photocatalytic reaction mechanism has been proposed to explain these findings., The authors acknowledge the Spanish Research Council CSIC for funding through the projects COOPB22002 and COOPB24072. This research work was also financially supported by Haramaya University (HURG-2020-03-02-75, Ethiopia) and Debre Berhan University. MSS acknowledges the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Batch and continuous flow elimination of BPA with one-pot synthetized laccase@NH2-MIL-53(Al)

  • Molina, M. Asunción
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
  • Meneses-Jácome, A.
Despite recent restrictions on its use, bisphenol A (BPA) continues to be present in wastewater, posing significant health risks that require effective removal methods. Several strategies have been proposed to address this issue, with batch reactors being the most widely used approach. However, scaling up removal systems to continuous flow conditions is essential for practical application in real-world wastewater treatment. This study presents a BPA removal system utilizing a packed bed reactor (PBR) with supported enzymatic catalyst. In previous research, we demonstrated that the laccase@NH2-MIL-53(Al) catalyst was highly effective in degrading BPA in a batch reactor, thanks to its high enzyme loading and minimal enzyme leaching. The system achieved over 80 % removal efficiency along five reaction cycles, operating faster than free enzyme systems. In this work, we extend the application of this catalyst to continuous flow conditions in a PBR, achieving superior removal efficiencies compared to batch processes. Under continuous flow, the biocatalyst maintained over 90 % BPA removal for extended periods, even at higher contaminant concentrations than typical in environment. The system exhibited remarkable stability with no diffusional limitations, suggesting high substrate accessibility to the enzyme. Additionally, chemical oxygen demand (COD) analyses of treated samples showed minimal increases, reinforcing the environmental compatibility and efficiency of the system. These findings highlight the potential of MOF-supported laccase for industrial applications in wastewater treatment, offering a scalable and sustainable solution for BPA degradation., This work has been financed by CSIC (2019AEP076 and COOPB22002). M.A.M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077 and UAM for Ph.D. Program in Applied Chemistry. A.M. acknowledges support from COOPB20377 for his stay at the ICP-CSIC. The authors acknowledge the CYTED-LIDA network and the SAB group of ITESM. The authors acknowledge the projects TED2021-131143B-I00 and PID2022-136321OB-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR, and MCIN/AEI/10.13039/501100011033 and FEDER, respectively., Peer reviewed