Pasar al contenido principal

CAPTURA DIRECTA DE CO2 DEL AIRE CON MEMBRANAS NANOCOMPUESTAS DE CAPA FINA BASADAS EN MOF

PID2022-138582OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian Daniel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Jaimes-Paez, Cristian Daniel|||/items/ac839a07-b546-4847-9217-c898cb6012b7
Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure through the two fundamental strategies of pH control and previous calcination of the zeolite. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO2 separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications., This research acknowledges grant TED2021-130621B-C41 by Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN) and the European Union-NextGeneration EU. Also, grants PID2019-104009RB-I00 and PID2022-138582OB-I00, funded by AEI-MCIN, Spain, are acknowledged. In addition, financial support from the Aragón Government (T68_23R and M. P.-M. PhD grant) is thanked. M. Yahia acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the María Zambrano programme. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes. A. Mayoral acknowledges the Spanish Ministry of Science through the Ramon y Cajal programme (RYC2018-024561-I) and to regional government of Aragon (DGA E13_23R). Authors acknowledge Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas, both at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Andrographolide encapsulation in Metal-Organic Frameworks (MOFs) via solvent-free process at high pressure

  • Pantoja-Romero, Wenndy
  • Aysa-Martínez, Yolanda
  • Lavín-Flores, Alexis
  • Medina-Berrios, Nataniel
  • Bayro, Marvin J.
  • Morell, Gerardo
  • Weiner, Brad R.
  • Coronas, Joaquín
Andrographolide (ADG) encapsulation was carried out on MOFs MIL-53(Al) and ZIF-8 by high-pressure (0.3 GPa) contact. This methodology is not only environment-friendly but also energy/time-saving and gives rise to ADG-MOFs with physical features equivalent to those of materials obtained by common liquid phase encapsulation. The loaded MOFs were characterized through TEM, SEM, XRD, TGA, FT-IR, BET, and NMR. The observed decrease in the intensity of ADG XRD peaks is due to the adsorption of ADG into the MOFs. TGA showed the decomposition step of ADG in the range of 200–300 °C in both loaded MOFs. FT-IR also showed intense signals of the ADG in the synthesized materials. The dissolution profile of ADG in MIL-53(Al) in PBS (pH=7.4) was carried out showing that the drug was released up to 96 % after 75 h. Solid-state NMR confirmed the interactions between ADG molecules and ZIF-8 groups and the formation of a hydrogen bond between the carboxylic group of ADG and the hydroxyl group of MIL-53(Al). Coefficient partition studies determined that both MOFs did not improve the hydrophilicity of the ADG, due to the loading of the drug preferably occurring by interactions in the hydrophobic areas within the pores of the MOFs., This research was carried out under the auspices of the Fundación Carolina España, PR NASA EPSCoR (NASA Cooperative Agreement [NNX15AK43A]) and the Research Initiative for Scientific Enhancement program (RISE [5R25GM061151-20]). We want to acknowledge Mr. Kim Kisslinger from Brookhaven National Institute -New York for taking HR-TEM images. To Mr. Guillermo Blazquez García, for his contributions in Figure 1, image creation and editing. is gratefully acknowledged. We also acknowledge funding in part from the National Institutes of Health/National Cancer Institute under Grant #U54 CA096297, grant PID2022-138582OB-I00 funded from the Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación and by “ERDF a way of making Europe” and grant T68-23R from the Aragón Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How can the filler-polymer interaction in mixed matrix membranes Be enhanced?

  • Hasan, Md. Rafiul
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler-polymer interaction to avoid non-selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side-chain modification and post-synthetic modification of filler., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial support from “the Government of Aragón (T68-23R)” is also thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes based on renewable polymer Pebax® and zeolitic imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Coronas, Joaquín
This study investigates the impact of integrating Pebax® Rnew® 30R51, a sustainable elastomer-type copolymer material, with zeolitic imidazolate frameworks (ZIFs) to develop advanced membranes for CO2/CH4 gas separation. The fabrication process of ZIF/Pebax® Rnew® 30R51 thin films was optimized to achieve uniform and defect-free thin film composite (TFC) membranes. Crucial membrane properties, including permeability, selectivity and separation efficiency, were analyzed with variations in ZIF type, loading levels, film thickness and operating conditions. Additionally, the resulting TFC and ZIF/Pebax® Rnew® 30R51 thin film nanocomposite (TFN) membranes were subjected to characterization via FTIR, XRD, TGA and SEM to evaluate their physicochemical properties. Nanoparticles of ZIF-8, NH2-ZIF-8 and ZIF-94 were individually added (at 5–15 wt% loadings) to the Pebax® Rnew® 30R51 matrix to develop the CO2 separation efficiency. The pristine TFC membrane showed a 66 GPU CO2 permeance and a 37.5 CO2/CH4 separation selectivity, primarily due to improved CO2 mass transport. Upon inclusion of ZIFs, the CO2 permeance with 5 wt% loadings of ZIF-8, NH2-ZIF-8 and ZIF-94 increased to 148, 99 and 125 GPU, respectively, despite this, the CO2/CH4 separation selectivity maintained at 29.4, 37.0 and 27.0, respectively., This work acknowledges grants PID2022–138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021–130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023–001286-S (funded by MICIU/AEI /10.13039/501100011033). M. Yahia was supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Technical guidance and instrumentation provided by “the Universidad de Zaragoza” through “the national facility ELECMI ICTS Laboratorio de Microscopías Avanzadas” and “the Servicio General de Apoyo a la Investigación-SAI” are thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1., This recent investigation is acknowledging the grants: 1. PID2019-104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033/), 2. PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), 3. TED2021-130621B-C4 (funded by MICIU/AEI/10.13039/501100011033/ and The “European Union Next-Generation-EU/PRTR”), 4. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. M. Yahia's is supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from “the Government of Aragón (T68_23R)” is also recognized. Furthermore, technical guidance and instrumentation provided by “the Universidad de Zaragoza/UNIZAR” through “the national facility ELECMI ICTS”, “the Servicio General de Apoyo a la Investigación-SAI”, and “Laboratorio de Microscopías Avanzadas”, are appreciated., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied., This work gratefully acknowledges grants PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”), PID2019-104009RB-I00 funded by MICIU/AEI/10.13039/501100011033 and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033/). Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node « Laboratorio de Microscopias Avanzadas (LMA) » at « Universidad de Zaragoza»., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Open and FAIR data for nanofiltration in organic media: A unified approach

  • Van Buggenhout, Simon
  • Coronas, Joaquín
  • Vankelecom, Ivo F.J.
  • Verbeke, Rhea
Van Buggenhout, Simon: et al., Organic solvent nanofiltration (OSN), also called solvent-resistant nanofiltration (SRNF), has emerged as a promising technology for the removal of impurities, recovery of solutes, and the regeneration of solvents in various industries, such as the pharmaceutical and the (petro)chemical industries. Despite the widespread use of OSN/SRNF, the presence of scattered, non-standardized data, and the absence of openly accessible data pose critical challenges to the development of new membrane materials and processes, their comparison to the state-of-the-art materials, and their fundamental understanding. To overcome these hurdles, data from peer-reviewed research articles and commercial datasheets were curated via a standardized procedure to obtain an extensive dataset on the membrane materials, synthesis parameters, operational conditions, physicochemical properties, and performance of OSN/SRNF membranes. Thanks to a truly impressive joint effort of the OSN/SRNF community, the dataset contains, as per April 2024, 5006 unique membrane filtrations from 294 publications for 42 solvents under several process parameters. This findable, accessible, interoperable, reproducible, and open (FAIR/O) dataset is available on both the OSN Database and the newly inaugurated Open Membrane Database for SRNF (OMD4SRNF). These databases provide multiple visualization and data exploration tools. Here, the standardized procedure applied to curate the data and the functionality of the databases are outlined, as well as the online user interface to deposit new data by external users on the OMD4SRNF. This community-led project has been supported by all the co-authors of this work. Most importantly, they additionally agreed to systematically deposit their future peer-reviewed data on OSN/SRNF into the databases. We thereby pave the road for FAIR/O data in the field of OSN/SRNF to increase transparency, enable more accurate data analysis, and foster collaboration and innovation., The website and back-office development of the OMD, and by extension the OMD4SRNF, is performed with the help of Thomas Stassin and Pierre Biezemans from codefathers.be. The research reported in this publication was supported by funding from King Abdullah University of Science and Technology (KAUST) and KU Leuven. This work was supported by the Research Foundation Flanders (FWO) through R.V. junior postdoctoral fellowship (1216222 N), S.C. and M.L. doctoral fellowships (1SF9825 N and 1S93122 N) and project grant G0C6623 N. This work was supported by the Flemish government through Industrieel Onderzoeksfonds (IOF) grants (VTI-23-00181, C3/21/066 and IOFM/17/008) and by VLAIO through the RENOVATE 2 program (HBC.2022.0536). Y.R. and R.P.L. were supported by the National Science Foundation (DMREF-1921873). J.C. acknowledges the Spanish Agencia Estatal de Investigación (PID2022-138582OB-I00 through MCIN/AEI/10.13039/501100011033/and “ERDF A way of making Europe”) as well as the Aragón Government (T68_23R). This work was partially supported by Kobe University Strategic International Collaborative Research Grant (Type B Fostering Joint Research). J.R.M. and S.B. were supported by the National Alliance for Water Innovation and the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy (EERE), Industrial Efficiency and Decarbonization Office, under Funding Opportunity Announcement Number DE-FOA-0001905. K.Z. and Q.F. acknowledge grants from the National Key R&D Program of China (2023YFC3709005), the Ministry of Science and Technology, PRC, the Bureau of International Cooperation, Chinese Academy of Sciences (132C35KYSB20160018). K.Z. thanks Ocean University of China Professor Fellowship. M.G. gratefully acknowledges financial support from the US National Science Foundation (NSF-CBET) under the CAREER Program (#2043648). U.K. and H.S. were supported by the German Research Foundation within the Research Unit FOR5538 IMPD4Cat, grant KR2491/14-1. A.J.V. and S.S. acknowledge the Max-Planck-Society for funding. A.V. and A.Y. were supported by State Program of TIPS RAS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphiphilic zeolitic imidazolate framework for improved CO2 separation in PIM-1 mixed matrix membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Iñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF-94, known for its affinity to CO2, was partially modified with 2-undecylimidazolate (umIm) through the solvent-assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM-1. The modified ZIF-94 (ZIF-94-umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g-1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM-1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and the European Union-NextGeneration EU), and CEX2023-001286-S (funded by MICIU/AEI /10.13039/501100011033). Financial support from the Aragón government (GA), T68-23R, and M. P.-M. PhD grant, is also gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva-Formación programmes. A. Mayoral acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and GA (E13_23R). A.B. Foster acknowledges EPSRC Programme Grant EP/V047078/1 “SynHiSel”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Life cycle assessment and multi-objective optimization of biogas upgrading using chitosan based composite membranes

  • Dawood, Beheshta
  • Torre-Celeizabal, Andrea
  • Pina-Vidal, Cristina
  • Téllez, Carlos
  • Rumayor, Marta
  • Garea, Aurora
  • Casado-Coterillo, Clara
Biopolymer membranes, hybridized by non-toxic or renewable fillers are gaining attention on the preparation of membranes for CO2 separation, providing their flux and mechanical endurance is improved to provide environmental and economic viability as real alternatives in the decarbonization of the chemical industry. Cellulose acetate is the most commonly found natural biopolymer but its preparation needs organic solvents and it is prone to plasticization. Chitosan biopolymer can be produced from fish waste, but its mechanical resistance is limited due to its high hydrophilicity. In this work, chitosan was blended with cellulose acetate or starch, which can also be obtained from biowaste. The membranes were characterized by single N2, CH4 and CO2 gas permeation and also CO2/CH4 mixture separation. The CO2 permeance of CS:ST membranes was closer to commercial PDMS membrane, and the CO2/CH4 selectivity of CS:CA membranes was in the range of selective polymer membranes for this application. A sustainability assessment of the membrane fabrication was performed using Life Cycle Assessment with three environmental impact categories (ReCiPe midpoint method): Global warming, energy and materials depletion. A multi-objective optimization model was applied to optimize the process conditions in the simultaneous CO2 and CH4 recovery from model biogas feed stream optimal mass and energy balances. The optimized energy consumption for the separation was utilized on the evaluation of the cradle-to-gate environmental performance for the membranes attaining 90 % purity and recovery in CO2 and CH4 in the permeate and retentate outlet streams, respectively., Funding from regional government through “Contrato Programa Gobierno de Cantabria – UC”, the European Union for the Bio4HUMAN GA 101135144 Horizon Europe project and the Spanish State Research Agency for the project grant PID2019-108136RB-C31/AEI/10.13039/501100011033 are gratefully acknowledged. A.T.C. also acknowledges the AEI for the Early-Stage Researcher contract PRE2020-09765/aei/10.13039/50111000110333. Grant PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU is also recognized. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, “Laboratorio de Microscopías Avanzadas” node at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-free process for preparing metal-organic framework composites based on carbon-based quantum dots and their derivatives as drug delivery systems for Andrographolide

  • Pantoja-Romero, Wenndy
  • Lavín-Flores, Alexis
  • Morell, Gerardo
  • Martínez-Ferrer, Magaly
  • Weiner, Brad R.
  • Coronas, Joaquín
Andrographolide (ADG) was conjugated with MIL-53(Al), ZIF-8, carbon-based quantum dots (CBQDs) and doped carbon-based quantum dots (D-CBQDs) using high-pressure (0.3 GPa) contact. This solvent-free approach is environmentally friendly, energy-efficient, and time-saving, resulting in ADG-MOFs-CBQDs/D-CBQDs with physical properties comparable to those produced by traditional liquid phase encapsulation. The resulting nanocomposites were characterized using SEM, XRD, TGA, FT-IR, and 1H NMR. The results indicate that ADG was partly encapsulated within the metal-organic framework (MOF) pores, while another portion was bound externally to CBQD/D-CBQDs, as evidenced by distinct drug signals in each analysis. This green synthesis approach simplifies the conjugation process. It significantly enhances the drug solubility, as indicated by changes in hydrophobicity observed via 1H NMR, surpassing the improvements achieved by ADG encapsulation within MOFs alone. Additionally, in preliminary tests, the materials exhibited significant cytotoxicity against PC3 cells compared to ADG (25.05 ± 0.06 µg/mL) after 48 hours of exposure., This research was carried out under the auspices of the Fundación Carolina España, PR NASA EPSCoR (NASA Cooperative Agreement [NNX15AK43A]). We also acknowledge funding in part from the National Institutes of Health/National Cancer Institute under Grant #U54 CA096297. This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”) and CEX2023-001286-S (funded by MICIU/AEI /10.13039/501100011033) and grant T68-23R from the Aragón Government., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study for CO2 separation with poly(ethylene oxide terephthalate)-poly(butylene terephthalate) multiblock copolymer membranes: Approaching a greener solvent preparation

  • Martínez-Visus, Iñigo
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., Green solvent alternatives for the multiblock copolymer PolyActive™ were selected to test their effectiveness in membrane fabrication for gas separation. Solubility tests were conducted to assess the solvent-polymer compatibility, followed by membrane fabrication using a drop casting-solution method. Ethyl lactate was identified as a potential greener solvent, compared to more commonly used solvents like chloroform and tetrahydrofuran, as it maintained the membrane conformation, thermal and chemical stability, and thermal degradation characteristics as demonstrated by membrane characterization using SEM, FTIR, TGA and DSC. Single gas transport parameters (permeability, diffusivity and solubility) for N2, H2, CH4, He and CO2 were obtained via the time-lag method for the prepared membranes. A temperature dependence study was conducted in the 25–70 °C range, calculating activation energies for gas transport properties and ideal selectivities. Mixed gas measurements were also performed, comparing separation selectivities to those (ideal selectivities) obtained in single gas, indicating a potential competitive adsorption effect between less permeable species, leading to more selective separation in gas mixture. Membranes prepared with different polymer concentrations (1, 2 and 5 wt%) in ethyl lactate achieve a CO2/N2 ideal selectivity of up to 50.4 at a CO2 permeability of 179 Barrer. This enhanced performance was attributed to ethyl lactate higher boiling point, resulting in a more densely packed polymer structure as reflected by the higher crystallinity and lower fractional free volume measured through XRD, DSC and pycnometry analyses., This work gratefully acknowledges grants PID2022–138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), PID2019–104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033) and CEX2023–001286-S (funded by MICIU/AEI/10.13039/501100011033/). I. Martínez-Visus was supported through grant PRE2020–092006 (funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”). Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». Finally, Prof. Dr Steven Abbott is thanked for providing estimation of Hansen solubility parameters of PolyActive™., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation., This work gratefully acknowledges grants PID2022-138582OB-I00 and PID2021-123079OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. L. Güemes also thanks the Aragón Government (DGA) for his Ph.D. grant. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced flux of nanofiltration membranes for low molecular weight solutes using Zr-MOF@MoS2 nanohybrids as both interlayer and filler materials

  • Colás-Sebastián, Javier
  • Luque-Alled, José Miguel
  • Téllez, Carlos
  • Coronas, Joaquín
This study investigates the fabrication and performance of polyamide (PA) thin film composite (TFC) membranes for nanofiltration applications, incorporating nanosized (∼10 nm) zirconium-based metal-organic frameworks (MOFs) and MoS2. Three different Zr-MOFs, namely UiO-66, UiO-66-NH2 and MOF-808, were synthesized and anchored onto 2D MoS2 nanosheets forming MOF@MoS2 nanohybrids. These nanohybrids were integrated into PA TFC membranes using two distinct methods: (i) embedding them into the PA layer, resulting in thin film nanocomposite (TFN) membranes, and (ii) creating bilayered membranes with the nanohybrids beneath the PA layer. The membranes were evaluated for the removal of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da), from water. The TFN membranes containing UiO-66@MoS2 nanohybrids exhibited the highest performance, with a water permeance of 12 L·m−2·h−1·bar−1 for the SY dye solution, representing a 140 % increase relative to the control PA TFC membrane. All membranes exhibited high rejection values (> 98 %), with performance strongly influenced by the dye size and charge. The characterization revealed that the porosity and sorption capacities of the nanohybrids are crucial to obtain more permeable membranes, but other factors such as negative surface charge, roughness and hydrophilicity play an important role., Grant PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU is gratefully acknowledged (“Agencia Estatal de Investigación” (AEI, Spain), “Ministerio de Ciencia, Innovación y Universidades” (MCIN, Spain) and European Regional Development Fund (ERDF, EU)). J. M. Luque-Alled acknowledges Grant FJC2021-047822-I funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. Grants T68_23R and CEX2023-001286-S funded by Government of Aragon and MICIU/AEI/10.13039/501100011033, respectively, are also gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative starch-PVA membranes incorporating amino-functionalized Zeolitic Imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Amenakpor, Jacking
  • Coronas, Joaquín
  • Zornoza, Beatriz
The growing need for efficient CO2 separation in natural gas purification and carbon capture has driven the advancement of high-performance membrane technologies. This study incorporates the zeolitic imidazolate framework ZIF-8-NH2 into blends of polysaccharide starch and polyvinyl alcohol (PVA) to fabricate eco-friendly membranes. These materials, prepared as dense mixed matrix membranes (MMMs) and thin-film nanocomposite (TFN) membranes, offer a sustainable solution for CO2/CH4 separation. The integration of ZIF-8-NH2 nanoparticles, recognized for their high crystallinity and surface area and selective adsorption capacity into the starch–PVA matrix (33/67 blend ratio), significantly enhances CO2 permeability, increasing from 124 to 188 Barrer at 10 wt% loading, while preserving high CO2/CH4 selectivity (14.1 for the pristine blend and 16.5 for the MMM). For TFNs, a 9/91 starch-PVA matrix with 15 wt% ZIF-8-NH2 incorporated into the selective layer resulted in the best conditions. This architecture provided robust mechanical stability and high separation performance, yielding a CO2 permeance of up to 208 GPU and a CO2/CH4 selectivity of 26.9 at 3 bar feed pressure, nearly doubling the selectivity compared to the dense biopolymer blend. This work highlights the potential of renewable, starch-based materials in membrane-based gas separation, contributing to sustainable solutions for natural gas purification and carbon capture., B. Zornoza acknowledges the grant RYC2022-038139-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. This work was supported by grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033 and the European Union-Next Generation EU), and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial assistance was also provided by the Government of Aragon (T68_23R). The authors would like to thank the Universidad de Zaragoza for the use of “Servicio General de Apoyo a la Investigación-SAI” and the use of instrumentation as well as the technical support and access to the National Facility ELECMI ICTS, “Laboratorio de Microscopias Avanzadas”, at the “Universidad de Zaragoza”. Finally, J. Amenakpor thanks the European Commission - Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Master in Membrane Engineering for Sustainable Development, MESD, Project number: 101081874, Call: ERASMUS-EDU-2022-PEX-EMJM-MOB., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Membrane preparation assisted by integration of machine learning and response surface methodology for CO2 separation

  • Carrillo-Sánchez, Lucía
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., The separation of carbon dioxide (CO2) is presented as a current challenge in the environment and energy sector. The primary reason for this is to control the emissions of this gas into the atmosphere and the upgrading of biomethane. In this context, the membrane separation technology seems to be a very sustainable promising tool for such tasks. This work presents a machine learning (ML) study, based on a database created from membrane preparation conditions and gas separation records from the literature, achieved for the CO2/N2 and CO2/CH4 mixtures using dense membranes of thermoplastic elastomer Pebax® 1657. A comparative analysis of three different ML models was carried out: multiple linear regression, decision tree and random forest. This last algorithm demonstrates the best performance in statistics terms of coefficient of determination and root mean square error. In addition, the combination of the ML random forest with a method based on the design of experiments with response surface methodology (RSM) allowed to identify the favorable conditions for the membrane synthesis, with the objective of enhancing the CO2 separation performance. This resulted in prepared membranes in the laboratory considering the proposed conditions by RSM with CO2 permeability and CO2/X selectivity values of 115 Barrer and 43.5 and 132 Barrer and 16.4 for the CO2/N2 and CO2/CH4 mixtures, respectively, at 35 °C., Grant PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033/and by “ERDF A way of making Europe” is gratefully acknowledged. Also, grant T68_23R funded by Aragón Government, IASOMM24004 funded by European Union-NextGenerationEU/PRTR (C16.R1) and grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033/are thanked. In addition, “Investigo Program” of “Servicio Público de Empleo Estatal” which is funded by European Union-NextGenerationEU/PRTR is gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergy of block and microporous polymers with tailored zeolitic Imidazole frameworks for membrane‐based direct air capture

  • Martínez-Visus, Iñigo
  • Carrillo-Sánchez, Lucía
  • Luque-Alled, José Miguel
  • Foster, Andrew B.
  • Budd, Peter M.
  • Téllez, Carlos
  • Coronas, Joaquín
The data that support the findings of this study are available from the corresponding author upon reasonable request., Direct air capture (DAC) concerns the separation from air of carbon dioxide (CO2), the most significant greenhouse gas in the atmosphere, as a means of producing negative emissions. The challenge for the scientific and industrial communities is tremendous, and membrane technology is postulated as an efficient alternative in terms of energy, costs, and ease of implementation. Two polymers, commercial elastomeric PolyActive and high-performance polymer of intrinsic microporosity (PIM-1), with complementary permeation-selectivity features, to form both dense and thin film composite membranes, are studied to operate in the 500 ppm to 15% range of CO2 feed concentration and at 10–50 °C temperatures. A study on its synergistic pairing for a multistage DAC process is evaluated and to enhance the separation performance, the membranes are modified with zeolitic imizadolate frameworks (ZIF), capable of modification by solvent-assisted ligand exchange (SALE). A sequential SALE process is designed using two different ligands, one hydrophilic and the other hydrophobic, to modify nanosized ZIF-8 and produce a ZIF with tailored ligand composition. This is aimed at improving both the CO2 interaction and compatibility of MOF with the membrane polymer, achieving at 500 ppm a CO2 permeance of 1037 GPU with a CO2/N2 selectivity of 16.2., This work gratefully acknowledges grants PID2022–138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”). CEX2023–001286-S (funded by MICIU/AEI/10.13039/501100011033/). I.M.-V. was supported through grant PRE2020–092006 (funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”). L.C.-S. was supported by “Programa Investigo” of “Servicio Público de Empleo Estatal”, which is funded by the Union Europea-NextGenerationEU/PRTR. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva-Formación programmes. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigacion-SAI. Universidad de Zaragoza and the use of instrumentation, as well as the technical advice provided by the National Facility ELECMI ICTS. Node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». Andrew Foster is supported by EPSRC Programme Grant EP/V047078/1 (SynHiSel)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High pressure-based synthesis of nanoporous metal–organic framework ZIF-93 giving rise to a phase for proton conduction

  • Pérez-Miana, Marta
  • Fernández de Luis, Roberto
  • Fidalgo-Marijuan, Arkaitz
  • Li, Junyan
  • Mayoral, Álvaro
  • Coronas, Joaquín
This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to “high-pressure”), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn(C5N2OH5)2·1.2(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4+ and NO3– ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10–3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here., This research acknowledges grant PID2022-138582OB-I00, EVOLMOF PID2021-122940OB-C31 and CEX2023-001286-S funded by Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia, Innovación y Universidades (MICIU) and by “ERDF a way of making Europe”. Financial support from the Aragón Government (GA), T68-23R and M.P.-M. Ph.D. and postdoctoral (POSTDOC_ECV_06_25) grants, is also gratefully acknowledged. A.M. acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and to GA (E13-23R). Authors acknowledge Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas, both at Universidad de Zaragoza and to the Center for High-Resolution Electron Microscopy (CℏEM), ShanghaiTech University (EM02161943)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed matrix membranes of PIM-1 incorporating MOF-808 functionalized with amino acids for enhanced CO2/CH4separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Martínez-Hernández, Harol David
  • Jimenez-Ruiz, Monica
  • Galván, Vanessa
  • Petrenko, Viktor
  • Fernández de Luis, Roberto
  • Coronas, Joaquín
This study investigates the enhancement of CO2/CH4 separation performance in mixed matrix membranes (MMMs) by incorporating amino acid-functionalized MOF-808 (MOF-808@AA; AA = Lys, Arg and Cys) into a polymer of intrinsic microporosity (PIM-1) matrix. MMMs containing 10 wt% MOF-808@AA were fabricated via solution casting. The structural and physicochemical properties of PIM-1, MOF-808@AA, and the resulting MMMs were characterized using 1H-NMR, FTIR, TGA, SEM, XRD, SAXS, N2/77 K and CO2/15 °C isotherms, and high-pressure CO2 adsorption. Collectively, the characterization results confirm the successful incorporation of MOF-808@AA into the PIM-1 membranes, with no detectable alteration of the nanostructure of the PIM-1 matrix. Gas separation measurements revealed a notable increase in both CO2 permeability and CO2/CH4 selectivity upon incorporation of MOF-808@AA fillers. Among the tested membranes, the PIM-1/MOF-808@Lys MMM functionalized with lysine exhibited the best performance, achieving a CO2 permeability of 14 354 ± 201 Barrer and a CO2/CH4 selectivity of 26.4 ± 1.8. Aging effects were also studied, showing a reduction in CO2 permeability accompanied by a slight increase in selectivity over time. In addition, the single and mixed gas experiments at elevated pressures (up to 6 bar) showed that CO2 permeability under mixed gas conditions was slightly higher than in single gas experiments, supporting the potential of these MMMs for application in realistic CO2/CH4 separation processes under practical operating conditions. Inelastic neutron scattering (INS) and density functional theory (DFT) calculations confirmed that CO2 molecules preferentially interact with the amino groups introduced by AA functionalization. DFT simulations further revealed that while CO2 and CH4 access similar adsorption sites, the interaction energy of CO2 with amino groups is approximately three times higher than that of CH4. These findings demonstrate that MOF-808@AA fillers can significantly enhance the CO2-philicity of PIM-1-based MMMs, offering a promising approach for efficient CO2/CH4 separation compared to pristine PIM-1 or unmodified PIM-1/MOF-808 composites., This investigation received financial support through multiple funding sources: MCIN/AEI/10.13039/501100011033 and ERDF (“A way of making Europe”) provided support via grants PID2022-138582OB-I00 and PID2021-122940OB-C31; the European Union's NextGenerationEU program and MCIN/AEI/10.13039/501100011033 jointly funded TED2021-130621B-C4; and MICIU/AEI/10.13039/501100011033 supported CEX2023-001286-S. Researcher M. Yahia was supported through the María Zambrano fellowship program, financed by both the European Union's NextGenerationEU initiative and Spain's Ministerio de Universidades. Additional financial backing came from the Government of Aragón (T68_23R). The research team expresses sincere appreciation for the technical resources and instrumentation made available by Universidad de Zaragoza, particularly through the ELECMI ICTS Laboratorio de Microscopías Avanzadas national research facility and the Servicio General de Apoyo a la Investigación-SAI. H. D. Martinez-Hernandez acknowledges the Institute Laue-Langevin and the Spanish MCIN for his PhD/CFR contract (Reference: ESP-2-2023)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled synthesis of ZIF-8 nanoparticles in the 20-60 nm range

  • Selvin, Minu
  • Esteras-Saz, Javier
  • Coronas, Joaquín
The control of particle size of zeolitic imidazolate framework ZIF-8 is crucial due to the high impact of such parameter on the material properties, like crystallinity and surface area, with an important effect on emerging applications related to composite materials, molecular separations and encapsulation, among others. This study focuses on controlling the effect of several basic parameters to achieve different particle sizes below 100 nm with a narrow particle size distribution. Specifically, synthesis time, stirring speed, the addition of a deprotonator and its nature were systematically studied. As a result, ZIF-8 with average particle sizes of ca. 20 ± 4, 40 ± 6 and 60 ± 3 nm was successfully obtained. The different particle sizes were observed by SEM and compared with the corresponding crystallite size calculated from powder X-ray diffraction using different models. The strong correlation between both sizes validates the reliability of our different approaches to the synthesis of ZIF-8., Grant PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU is gratefully acknowledged («Agencia Estatal de Investigación» (AEI, Spain), «Ministerio de Ciencia, Innovación y Universidades» (MCIN, Spain) and European Regional Development Fund (ERDF, EU)). Grants T68_23R and CEX2023-001286-S funded by the Government of Aragon and MICIU/AEI/10.13039/501100011033, respectively, are also gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent Organic Framework (COF) based mixed matrix membranes as an alternative solution for gas separation

  • Alom, Jahangir
  • Rahman, Md Abdur
  • Hossein, Mehrafarin
  • Ban, Sagar
  • Martínez-Visus, Iñigo
  • Ahmed, Mohammed Boshir
  • Keskin, Seda
  • Téllez, Carlos
  • Zornoza, Beatriz
Data will be made available on request., Gas separation plays an essential role in refineries and the chemical industry, with membrane-based technologies gaining prominence for their low cost, compact equipment with a space-saving design footprint, energy efficiency, ease of scale-up, and environmental benefits. Current research focuses on enhancing membrane performance in actual operating conditions by optimizing the equilibrium between selectivity and permeability to expand commercial and industrial applications. This balance between selectivity and permeability can be addressed by using mixed-matrix membranes (MMMs), which are formed by adding nanostructured fillers to the polymer to enhance its separation properties. In this scenario, covalent-organic frameworks (COFs) show considerable potential. COFs have generated significant interest in membrane separation owing to their stable organic structures, compatibility with polymers, and tailorable pore sizes and chemical functionalities. This review provides a systematic overview of COF-based MMMs for gas separation, distinguishing this work from previous reviews that broadly address other inorganic fillers incorporated into MMMs. The manuscript critically examines the physicochemical design principles and effective synthesis routes of COF fillers, their structure-performance relationships within polymer matrix, and, finally, their influence on gas transport behavior under practical operating conditions. Furthermore, a thorough examination of the challenges and opportunities of COF-based MMMs, along with recent advancements in the field, is conducted. The key benefits and drawbacks of using COFs with MOF as a double filler in MMM for gas separation are assessed with respect to permeability, selectivity, interfacial compatibility, and long-term stability. The review also provides recent advances in molecular modeling and machine-learning approaches for rational COF-based MMM design. Lastly, a summary of current research initiatives and potential future research directions is provided to accelerate the development of scalable and industrially viable COF-based MMMs., The authors thank the European Commission - Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Master in Membrane Engineering for Sustainable Development, MESD, Project number: 101081874, Call: ERASMUS-EDU-2022-PEX-EMJM-MOB. B. Zornoza acknowledges the grant RYC2022-038139-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. I. Martínez-Visus thanks the grant PRE2020-092006 (funded by MICIU/AEI/10.13039/501100011033 and by “ESF Investing in your future”). Grants PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033/, UZ2024-IyA-04 funded by the University of Zaragoza and JIUZ2024-IyA-10 funded by Fundación Ibercaja, are acknowledged. Financial assistance was also provided by the Government of Aragon (T68_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gaining insight into the synthesis of nanosized pure zeolite NaA

  • Güemes, Lucas
  • Coronas, Joaquín
  • Téllez, Carlos
In zeolite synthesis, controlling and reducing the particle size is advantageous for different processes in which mass transfer occurs through surface active sites. In this work, the hydrothermal synthesis of zeolite NaA has been studied in detail seeking to control the size, morphology and crystal phase of the resulting zeolite particles. Adjusting the crystallization conditions and molar composition of a SiO2-Al2O3-TMA2O-Na2O-H2O system allows for the consistent production of zeolite NaA with a particle size down to 68 nm measured by TEM, using tetramethylammonium (TMA) as the organic structure directing agent (OSDA). Within the composition region in which the LTA zeolite crystallization is favored, syntheses at higher OSDA/Na+ and Si/Al atomic ratios produce smaller particles. Depending on the synthesis gel molar formulation, different morphologies and sizes of LTA crystals (in the ∼68–760 nm range) with slightly distinct Si/Al atomic ratios (in the 1.1–2.3 range) can be achieved. The synthesized zeolites were characterized in detail by different techniques, and their textural properties were evaluated through CO2 and N2 adsorption and correlated with their composition., This work gratefully acknowledges grants PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. L. Güemes also thanks the Aragón Government (DGA) for his Ph.D. grant. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. CEX2023–001,286-S funded by MICIU/AEI/10.13039/501100011033/., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanoparticles enhance radiosensitivity in glioblastoma cells

  • Coppola, Laura
  • Cuestas-Ayllón, Carlos
  • Moros, María
  • Fuente, Jesús M. de la
  • Bifulco, Maurizio
  • Pagano, Cristina
Bifulco, Maurizio; Pagano, Cristina; et al., [Background]: Glioblastoma multiforme (GBM) is a highly aggressive primary brain tumor with a poor patient prognosis. Standard of care treatment includes maximal surgical resection, followed by radiotherapy and temozolomide administration. Despite this multimodal strategy, patients fail to achieve an effective response due to resistance to radio-treatment, allowing the tumor to recur. Therefore, there is a compelling need to discover new radiosensitizer approaches to overcome radioresistance and improve the response and survival of patients affected by glioblastoma. A novel approach is represented by nanoradiosensitizers, such as gold nanoparticles (AuNPs), able to enhance the effectiveness of radiotherapy., [Methods]: In this study, we assessed the biological interaction of AuNPs with ionizing radiation (IR) in both immortalized and primary patient-derived glioblastoma cell lines., [Results]: we observed that the combinatory effect of AuNPs with IR decreased cell viability and increased necrosis and apoptosis compared to cells treated only with IR or untreated cells. Additionally, our results showed an increase in the sensitization enhancement ratio (SER) of cells treated with AuNPs and IR. Furthermore, AuNPs showed a tumor-specific effect, since it did not seem to support the effects of radiation on the normal human astrocyte (NHA) cell line., [Conclusions]: Our results suggest that the use of AuNPrs can improve radiotherapy efficacy by increasing the radiosensitivity of the targeted cells., This work gratefully acknowledges grants PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. L. Güemes also thanks the Aragon Government (DGA) for his Ph.D. grant. Financial assistance from the Government of Arag´on (T68_23R) is also acknowledged. CEX2023–001,286-S funded by MICIU/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO<sub>2</sub> separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Open and FAIR data for nanofiltration in organic media: A unified approach

  • Van Buggenhout, Simon
  • Ignacz, Gergo
  • Caspers, Scout
  • Dhondt, Robin
  • Lenaerts, Marie
  • Lenaerts, Nathalie
  • Hosseinabadi, Sareh Rezaei
  • Nulens, Ines
  • Koeckelberghs, Guy
  • Ren, Yi
  • Lively, Ryan P.
  • Rabiller-Baudry, Murielle
  • Lim, Ki Min
  • Ghazali, Nazlee
  • Coronas, Joaquin
  • Abel, Milan
  • Wessling, Matthias
  • Skiborowski, Mirko
  • Oxley, Adam
  • Han, Seok Ju
  • Livingston, Andrew
  • Yi, Zhuan
  • Gao, Congjie
  • Guan, Kecheng
  • Gonzales, Ralph Rolly
  • Matsuyama, Hideto
  • Bettahalli, Srivatsa NM.
  • McCutcheon, Jeffrey R.
  • Radmanesh, Farzaneh
  • Benes, Nieck E.
  • Tashvigh, Akbar Asadi
  • Fang, Qing
  • Zhang, Kaisong
  • Chen, Guining
  • Jin, Wanqin
  • Zhang, Yatao
  • Zhang, Chun-Xu
  • Liu, Mei-Ling
  • Sun, Shi-Peng
  • Buekenhoudt, Anita
  • Zhao, Chen
  • Bruggen, Bart Van der
  • Kim, Jeong F.
  • Condes, Lucas C.
  • Webb, Matthew T.
  • Galizia, Michele
  • Alhazmi, Banan
  • Upadhyaya, Lakshmeesha
  • Nunes, Suzana P.
  • Kim, Dae Woo
  • Schröter, Henrik
  • Kragl, Udo
  • Störtte, Sven
  • Vorholt, Andreas J.
  • Culfaz-Emecen, P. Zeynep
  • Pizzoccaro-Zilamy, Marie-Alix
  • Winnubst, Louis
  • Yushkin, Alexey
  • Volkov, Alexey
  • Chau, John
  • Sirkar, Kamalesh K.
  • Lu, Shao
  • Szekely, Gyorgy
  • Vankelecom, Ivo
  • Verbeke, Rhea
Organic solvent nanofiltration (OSN), also called solvent-resistant nanofiltration (SRNF), has emerged as a promising technology for the removal of impurities, recovery of solutes, and the regeneration of solvents in various industries, such as the pharmaceutical and the (petro)chemical industries. Despite the widespread use of OSN/SRNF, the presence of scattered, non-standardized data, and the absence of openly accessible data pose critical challenges to the development of new membrane materials and processes, their comparison to the state-of-the-art materials, and their fundamental understanding. To overcome these hurdles, data from peer-reviewed research articles and commercial datasheets were curated via a standardized procedure to obtain an extensive dataset on the membrane materials, synthesis parameters, operational conditions, physicochemical properties, and performance of OSN/SRNF membranes. Thanks to a truly impressive joint effort of the OSN/SRNF community, the dataset contains, as per April 2024, 5006 unique membrane filtrations from 294 publications for 42 solvents under several process parameters. This findable, accessible, interoperable, reproducible, and open (FAIR/O) dataset is available on both the OSN Database and the newly inaugurated Open Membrane Database for SRNF (OMD4SRNF). These databases provide multiple visualization and data exploration tools. Here, the standardized procedure applied to curate the data and the functionality of the databases are outlined, as well as the online user interface to deposit new data by external users on the OMD4SRNF. This community-led project has been supported by all the co-authors of this work. Most importantly, they additionally agreed to systematically deposit their future peer-reviewed data on OSN/SRNF into the databases. We thereby pave the road for FAIR/O data in the field of OSN/SRNF to increase transparency, enable more accurate data analysis, and foster collaboration and innovation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes based on renewable polymer Pebax® and zeolitic imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Coronas, Joaquín
This study investigates the impact of integrating Pebax® Rnew® 30R51, a sustainable elastomer-type copolymer material, with zeolitic imidazolate frameworks (ZIFs) to develop advanced membranes for CO2/CH4 gas separation. The fabrication process of ZIF/Pebax® Rnew® 30R51 thin films was optimized to achieve uniform and defect-free thin film composite (TFC) membranes. Crucial membrane properties, including permeability, selectivity and separation efficiency, were analyzed with variations in ZIF type, loading levels, film thickness and operating conditions. Additionally, the resulting TFC and ZIF/Pebax® Rnew® 30R51 thin film nanocomposite (TFN) membranes were subjected to characterization via FTIR, XRD, TGA and SEM to evaluate their physicochemical properties. Nanoparticles of ZIF-8, NH2-ZIF-8 and ZIF-94 were individually added (at 5–15 wt% loadings) to the Pebax® Rnew® 30R51 matrix to develop the CO2 separation efficiency. The pristine TFC membrane showed a 66 GPU CO2 permeance and a 37.5 CO2/CH4 separation selectivity, primarily due to improved CO2 mass transport. Upon inclusion of ZIFs, the CO2 permeance with 5 wt% loadings of ZIF-8, NH2-ZIF-8 and ZIF-94 increased to 148, 99 and 125 GPU, respectively, despite this, the CO2/CH4 separation selectivity maintained at 29.4, 37.0 and 27.0, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Andrographolide Encapsulation in Metal-Organic Frameworks (MOFs) via Solvent-Free Process at High Pressure

  • Pantoja-Romero, Wenndy
  • Aysa-Martínez, Yolanda
  • Lavín-Flores, Alexis
  • Medina-Berrios, Nataniel
  • Bayro, Marvin J.
  • Morell, Gerardo
  • Weiner, Brad R.
  • Coronas, Joaquín
Andrographolide (ADG) encapsulation was carried out on MOFs MIL‐53(Al) and ZIF‐8 by high‐pressure (0.3 GPa) contact. This methodology is not only environment‐friendly but also energy/time‐saving and gives rise to ADG‐MOFs with physical features equivalent to those of materials obtained by common liquid phase encapsulation. The loaded MOFs were characterized through TEM, SEM, XRD, TGA, FT‐IR, BET, and NMR. The observed decrease in the intensity of ADG XRD peaks is due to the adsorption of ADG into the MOFs. TGA showed the decomposition step of ADG in the range of 200–300 °C in both loaded MOFs. FT‐IR also showed intense signals of the ADG in the synthesized materials. The dissolution profile of ADG in MIL‐53(Al) in PBS (pH=7.4) was carried out showing that the drug was released up to 96 % after 75 h. Solid‐state NMR confirmed the interactions between ADG molecules and ZIF‐8 groups and the formation of a hydrogen bond between the carboxylic group of ADG and the hydroxyl group of MIL‐53(Al). Coefficient partition studies determined that both MOFs did not improve the hydrophilicity of the ADG, due to the loading of the drug preferably occurring by interactions in the hydrophobic areas within the pores of the MOFs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

How Can the Filler-Polymer Interaction in Mixed Matrix Membranes Be Enhanced?

  • Hasan, Md. Rafiul
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler‐polymer interaction to avoid non‐selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side‐chain modification and post‐synthetic modification of filler.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study for CO2 separation with poly(ethylene oxide terephthalate)-poly(butylene terephthalate) multiblock copolymer membranes: Approaching a greener solvent preparation

  • Martínez-Visus, Íñigo
  • Téllez, Carlos
  • Coronas, Joaquín
Green solvent alternatives for the multiblock copolymer PolyActive™ were selected to test their effectiveness in membrane fabrication for gas separation. Solubility tests were conducted to assess the solvent-polymer compatibility, followed by membrane fabrication using a drop casting-solution method. Ethyl lactate was identified as a potential greener solvent, compared to more commonly used solvents like chloroform and tetrahydrofuran, as it maintained the membrane conformation, thermal and chemical stability, and thermal degradation characteristics as demonstrated by membrane characterization using SEM, FTIR, TGA and DSC. Single gas transport parameters (permeability, diffusivity and solubility) for N2, H2, CH4, He and CO2 were obtained via the time-lag method for the prepared membranes. A temperature dependence study was conducted in the 25–70 °C range, calculating activation energies for gas transport properties and ideal selectivities. Mixed gas measurements were also performed, comparing separation selectivities to those (ideal selectivities) obtained in single gas, indicating a potential competitive adsorption effect between less permeable species, leading to more selective separation in gas mixture. Membranes prepared with different polymer concentrations (1, 2 and 5 wt%) in ethyl lactate achieve a CO2/N2 ideal selectivity of up to 50.4 at a CO2 permeability of 179 Barrer. This enhanced performance was attributed to ethyl lactate higher boiling point, resulting in a more densely packed polymer structure as reflected by the higher crystallinity and lower fractional free volume measured through XRD, DSC and pycnometry analyses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Amphiphilic Zeolitic Imidazolate Framework for Improved CO2 Separation in PIM-1 Mixed Matrix Membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Íñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF‐94, known for its affinity to CO2, was partially modified with 2‐undecylimidazolate (umIm) through the solvent‐assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM‐1. The modified ZIF‐94 (ZIF‐94‐umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g−1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM‐1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Solvent-Free Process for Preparing Metal-Organic Framework Composites Based on Carbon-Based Quantum Dots and Their Derivatives as Drug Delivery Systems for Andrographolide

  • Pantoja-Romero, Wenndy
  • Lavín-Flores, Alexis
  • Morell, Gerardo
  • Martínez-Ferrer, Magaly
  • Weiner, Brad R.
  • Coronas, Joaquín
Andrographolide (ADG) was conjugated with MIL-53(Al), ZIF-8, carbon-based quantum dots (CBQDs) and doped carbon-based quantum dots (D-CBQDs) using high-pressure (0.3 GPa) contact. This solvent-free approach is environmentally friendly, energy-efficient, and time-saving, resulting in ADG-MOFs-CBQDs/D-CBQDs with physical properties comparable to those produced by traditional liquid phase encapsulation. The resulting nanocomposites were characterized using SEM, XRD, TGA, FT-IR, and 1H NMR. The results indicate that ADG was partly encapsulated within the metal-organic framework (MOF) pores, while another portion was bound externally to CBQD/D-CBQDs, as evidenced by distinct drug signals in each analysis. This green synthesis approach simplifies the conjugation process. It significantly enhances the drug solubility, as indicated by changes in hydrophobicity observed via 1H NMR, surpassing the improvements achieved by ADG encapsulation within MOFs alone. Additionally, in preliminary tests, the materials exhibited significant cytotoxicity against PC3 cells compared to ADG (25.05 ± 0.06 µg/mL) after 48 hours of exposure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Zeolite@Metal-organic framework core-shell synthesized from the aluminum of the zeolite with accessible internal surface for CO2 adsorption

  • Güemes, Lucas
  • Navarro, Marta
  • Cacho-Bailo, Fernando
  • Jaimes-Paez, Cristian D.
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
Combining the rigid microporosity of zeolites with the more versatile structures of metal–organic frameworks (MOFs) seeks to obtain a synergistic effect of both materials. Starting from a low cost and industrially produced zeolite, as it is zeolite NaA (with the LTA type structure), we show that it is possible to crystallize a MOF as shell onto it by only using an aqueous solution of terephthalic acid (H2BDC). Unlike other zeolite-MOF hybrids reported in the literature, the crystallized MOF only uses the aluminum from the zeolite and may share in turn some aluminum atoms with the inorganic zeolite core, therefore it consists solely of zeolitic Al and BDC. Depending on the pretreatment of the zeolite and the synthesis conditions (pH, time, linker ratio), the crystalline zeolite core is maintained or converted into an amorphous aluminosilicate. Thus, it is possible to retain a part of the adsorption properties of the parent zeolite without degrading its structure. The resulting core–shell material, designated as LTA@Al-BDC, combines the zeolite microporosity and molecular sieving properties with the MOF that crystallizes as high aspect ratio sheets which, together with its hydrophobicity, favors the contact with polymeric materials. In addition, being zeolite 4A (NaA) affinity towards CO2 been probed, the resulting LTA@Al-BDC material constitutes a prominent candidate towards CO2 separation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Life cycle assessment and multi-objective optimization of biogas upgrading using chitosan based composite membranes

  • Dawood, Beheshta
  • Torre-Celeizabal, Andrea
  • Pina-Vidal, Cristina
  • Téllez, Carlos
  • Rumayor, Marta
  • Garea, Aurora
  • Casado-Coterillo, Clara
Biopolymer membranes, hybridized by non-toxic or renewable fillers are gaining attention on the preparation of membranes for CO2 separation, providing their flux and mechanical endurance is improved to provide environmental and economic viability as real alternatives in the decarbonization of the chemical industry. Cellulose acetate is the most commonly found natural biopolymer but its preparation needs organic solvents and it is prone to plasticization. Chitosan biopolymer can be produced from fish waste, but its mechanical resistance is limited due to its high hydrophilicity. In this work, chitosan was blended with cellulose acetate or starch, which can also be obtained from biowaste. The membranes were characterized by single N2, CH4 and CO2 gas permeation and also CO2/CH4 mixture separation. The CO2 permeance of CS:ST membranes was closer to commercial PDMS membrane, and the CO2/CH4 selectivity of CS:CA membranes was in the range of selective polymer membranes for this application. A sustainability assessment of the membrane fabrication was performed using Life Cycle Assessment with three environmental impact categories (ReCiPe midpoint method): Global warming, energy and materials depletion. A multi-objective optimization model was applied to optimize the process conditions in the simultaneous CO2 and CH4 recovery from model biogas feed stream optimal mass and energy balances. The optimized energy consumption for the separation was utilized on the evaluation of the cradle-to-gate environmental performance for the membranes attaining 90 % purity and recovery in CO2 and CH4 in the permeate and retentate outlet streams, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced flux of nanofiltration membranes for low molecular weight solutes using Zr-MOF@MoS2 nanohybrids as both interlayer and filler materials

  • Colás Sebastián, Javier
  • Luque-Alled, José Miguel
  • Téllez, Carlos
  • Coronas, Joaquín
This study investigates the fabrication and performance of polyamide (PA) thin film composite (TFC) membranes for nanofiltration applications, incorporating nanosized (∼10 nm) zirconium-based metal-organic frameworks (MOFs) and MoS2. Three different Zr-MOFs, namely UiO-66, UiO-66-NH2 and MOF-808, were synthesized and anchored onto 2D MoS2 nanosheets forming MOF@MoS2 nanohybrids. These nanohybrids were integrated into PA TFC membranes using two distinct methods: (i) embedding them into the PA layer, resulting in thin film nanocomposite (TFN) membranes, and (ii) creating bilayered membranes with the nanohybrids beneath the PA layer. The membranes were evaluated for the removal of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da), from water. The TFN membranes containing UiO-66@MoS2 nanohybrids exhibited the highest performance, with a water permeance of 12 L·m−2·h−1·bar−1 for the SY dye solution, representing a 140 % increase relative to the control PA TFC membrane. All membranes exhibited high rejection values (> 98 %), with performance strongly influenced by the dye size and charge. The characterization revealed that the porosity and sorption capacities of the nanohybrids are crucial to obtain more permeable membranes, but other factors such as negative surface charge, roughness and hydrophilicity play an important role.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Membrane preparation assisted by integration of machine learning and response surface methodology for CO2 separation

  • Carrillo-Sánchez, Lucía
  • Téllez, Carlos
  • Coronas, Joaquín
The separation of carbon dioxide (CO2) is presented as a current challenge in the environment and energy sector. The primary reason for this is to control the emissions of this gas into the atmosphere and the upgrading of biomethane. In this context, the membrane separation technology seems to be a very sustainable promising tool for such tasks. This work presents a machine learning (ML) study, based on a database created from membrane preparation conditions and gas separation records from the literature, achieved for the CO2/N2 and CO2/CH4 mixtures using dense membranes of thermoplastic elastomer Pebax® 1657. A comparative analysis of three different ML models was carried out: multiple linear regression, decision tree and random forest. This last algorithm demonstrates the best performance in statistics terms of coefficient of determination and root mean square error. In addition, the combination of the ML random forest with a method based on the design of experiments with response surface methodology (RSM) allowed to identify the favorable conditions for the membrane synthesis, with the objective of enhancing the CO2 separation performance. This resulted in prepared membranes in the laboratory considering the proposed conditions by RSM with CO2 permeability and CO2/X selectivity values of 115 Barrer and 43.5 and 132 Barrer and 16.4 for the CO2/N2 and CO2/CH4 mixtures, respectively, at 35 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Innovative starch-PVA membranes incorporating amino-functionalized Zeolitic Imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Amenakpor, Jacking
  • Coronas, Joaquín
  • Zornoza, Beatriz
The growing need for efficient CO2 separation in natural gas purification and carbon capture has driven the advancement of high-performance membrane technologies. This study incorporates the zeolitic imidazolate framework ZIF-8-NH2 into blends of polysaccharide starch and polyvinyl alcohol (PVA) to fabricate eco-friendly membranes. These materials, prepared as dense mixed matrix membranes (MMMs) and thin-film nanocomposite (TFN) membranes, offer a sustainable solution for CO2/CH4 separation. The integration of ZIF-8-NH2 nanoparticles, recognized for their high crystallinity and surface area and selective adsorption capacity into the starch–PVA matrix (33/67 blend ratio), significantly enhances CO2 permeability, increasing from 124 to 188 Barrer at 10 wt% loading, while preserving high CO2/CH4 selectivity (14.1 for the pristine blend and 16.5 for the MMM). For TFNs, a 9/91 starch-PVA matrix with 15 wt% ZIF-8-NH2 incorporated into the selective layer resulted in the best conditions. This architecture provided robust mechanical stability and high separation performance, yielding a CO2 permeance of up to 208 GPU and a CO2/CH4 selectivity of 26.9 at 3 bar feed pressure, nearly doubling the selectivity compared to the dense biopolymer blend. This work highlights the potential of renewable, starch-based materials in membrane-based gas separation, contributing to sustainable solutions for natural gas purification and carbon capture.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synergy of Block and Microporous Polymers with Tailored Zeolitic Imidazole Frameworks for Membrane-Based Direct Air Capture

  • Martínez-Visus, Íñigo
  • Carrillo-Sánchez, Lucía
  • Luque-Alled, José Miguel
  • Foster, Andrew B.
  • Budd, Peter M.
  • Téllez, Carlos
  • Coronas, Joaquín
Direct air capture (DAC) concerns the separation from air of carbon dioxide (CO2), the most significant greenhouse gas in the atmosphere, as a means of producing negative emissions. The challenge for the scientific and industrial communities is tremendous, and membrane technology is postulated as an efficient alternative in terms of energy, costs, and ease of implementation. Two polymers, commercial elastomeric PolyActive and high‐performance polymer of intrinsic microporosity (PIM‐1), with complementary permeation‐selectivity features, to form both dense and thin film composite membranes, are studied to operate in the 500 ppm to 15% range of CO2 feed concentration and at 10–50 °C temperatures. A study on its synergistic pairing for a multistage DAC process is evaluated and to enhance the separation performance, the membranes are modified with zeolitic imizadolate frameworks (ZIF), capable of modification by solvent‐assisted ligand exchange (SALE). A sequential SALE process is designed using two different ligands, one hydrophilic and the other hydrophobic, to modify nanosized ZIF‐8 and produce a ZIF with tailored ligand composition. This is aimed at improving both the CO2 interaction and compatibility of MOF with the membrane polymer, achieving at 500 ppm a CO2 permeance of 1037 GPU with a CO2/N2 selectivity of 16.2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mixed matrix membranes of PIM-1 incorporating MOF-808 functionalized with amino acids for enhanced CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Martínez-Hernández, Harol David
  • Jiménez-Ruiz, Monica
  • Galván, Vanessa
  • Petrenko, Viktor
  • Fernández de Luis, Roberto
  • Coronas, Joaquín
This study investigates the enhancement of CO2/CH4 separation performance in mixed matrix membranes (MMMs) by incorporating amino acid-functionalized MOF-808 (MOF-808@AA; AA = Lys, Arg and Cys) into a polymer of intrinsic microporosity (PIM-1) matrix. MMMs containing 10 wt% MOF-808@AA were fabricated via solution casting. The structural and physicochemical properties of PIM-1, MOF-808@AA, and the resulting MMMs were characterized using 1H-NMR, FTIR, TGA, SEM, XRD, SAXS, N2/77 K and CO2/15 °C isotherms, and high-pressure CO2 adsorption. Collectively, the characterization results confirm the successful incorporation of MOF-808@AA into the PIM-1 membranes, with no detectable alteration of the nanostructure of the PIM-1 matrix. Gas separation measurements revealed a notable increase in both CO2 permeability and CO2/CH4 selectivity upon incorporation of MOF-808@AA fillers. Among the tested membranes, the PIM-1/MOF-808@Lys MMM functionalized with lysine exhibited the best performance, achieving a CO2 permeability of 14 354 ± 201 Barrer and a CO2/CH4 selectivity of 26.4 ± 1.8. Aging effects were also studied, showing a reduction in CO2 permeability accompanied by a slight increase in selectivity over time. In addition, the single and mixed gas experiments at elevated pressures (up to 6 bar) showed that CO2 permeability under mixed gas conditions was slightly higher than in single gas experiments, supporting the potential of these MMMs for application in realistic CO2/CH4 separation processes under practical operating conditions. Inelastic neutron scattering (INS) and density functional theory (DFT) calculations confirmed that CO2 molecules preferentially interact with the amino groups introduced by AA functionalization. DFT simulations further revealed that while CO2 and CH4 access similar adsorption sites, the interaction energy of CO2 with amino groups is approximately three times higher than that of CH4. These findings demonstrate that MOF-808@AA fillers can significantly enhance the CO2-philicity of PIM-1-based MMMs, offering a promising approach for efficient CO2/CH4 separation compared to pristine PIM-1 or unmodified PIM-1/MOF-808 composites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High Pressure-Based Synthesis of Nanoporous Metal–Organic Framework ZIF-93 Giving Rise to a Phase for Proton Conduction

  • Pérez-Miana, Marta
  • Fernández de Luis, Roberto
  • Fidalgo-Marijuan, Arkaitz
  • Li, Junyan
  • Mayoral, Álvaro
  • Coronas, Joaquín
This study aims to develop a green, solvent-free synthesis of ZIF-93 (ZIF stands for zeolitic imidazolate framework) and to explore the formation of different phases. We report the solvent-free synthesis of a previously unreported nanoporous ZIF phase, ZIF-93_HP (HP referring to “high-pressure”), from zinc oxide using a dual high-pressure (150 MPa) and thermal (110 °C) method. The influence of key synthesis parameters, such as the amount of NH4NO3 promotor and reaction steps, was systematically investigated to maximize the conversion of ZnO into the intermediate ZIF-93_HP, while, in parallel, preventing its further conversion into nanoporous ZIF-93 phase. The material was extensively characterized by X-ray diffraction, thermogravimetry, electron microscopy and N2 and CO2 adsorption, which revealed insights into the structure, morphology and nanoporosity of ZIF-93_HP. ZIF-93_HP, with empirical formula of Zn(C5N2OH5)2·1.2(NH4NO3)·(H2O), is related to the previously reported ZIF-93 (Zn(C5N2OH5)2). Water washing of this phase led to the transformation into ZIF-93 and a significant increase in the BET specific surface area (from 4 to 181 m2/g). In addition, the presence of NH4+ and NO3– ions into its structure makes ZIF-93_HP proton conductor at room temperature and moisture conditions (3.76 × 10–3 S/cm), a property that decreases with increasing temperature due to dehydration. The discovery of ZIF-93_HP highlights the potential of the high-pressure, solvent-free synthesis as a powerful tool for the exploration of different ZIFs and reticular materials that are inaccessible through traditional solvothermal methods. As crystallization under solvent-free conditions is often influenced by nonthermodynamic equilibrium, this approach holds a great potential for expanding the material landscape by enabling the discovery of different phases and structures with unique properties, such as the promising proton conductivity demonstrated here.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gaining insight into the synthesis of nanosized pure zeolite NaA

  • Güemes, Lucas
  • Coronas, Joaquín
  • Téllez, Carlos
In zeolite synthesis, controlling and reducing the particle size is advantageous for different processes in which mass transfer occurs through surface active sites. In this work, the hydrothermal synthesis of zeolite NaA has been studied in detail seeking to control the size, morphology and crystal phase of the resulting zeolite particles. Adjusting the crystallization conditions and molar composition of a SiO2-Al2O3-TMA2O-Na2O-H2O system allows for the consistent production of zeolite NaA with a particle size down to 68 nm measured by TEM, using tetramethylammonium (TMA) as the organic structure directing agent (OSDA). Within the composition region in which the LTA zeolite crystallization is favored, syntheses at higher OSDA/Na+ and Si/Al atomic ratios produce smaller particles. Depending on the synthesis gel molar formulation, different morphologies and sizes of LTA crystals (in the ~68–760 nm range) with slightly distinct Si/Al atomic ratios (in the 1.1–2.3 range) can be achieved. The synthesized zeolites were characterized in detail by different techniques, and their textural properties were evaluated through CO2 and N2 adsorption and correlated with their composition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Covalent Organic Framework (COF) based mixed matrix membranes as an alternative solution for gas separation

  • Alom, Jahangir
  • Rahman, Md Abdur
  • Hossein, Mehrafarin
  • Ban, Sagar
  • Martínez-Visus, Íñigo
  • Ahmed, Mohammed Boshir
  • Keskin, Seda
  • Téllez, Carlos
  • Zornoza, Beatriz
Gas separation plays an essential role in refineries and the chemical industry, with membrane-based technologies gaining prominence for their low cost, compact equipment with a space-saving design footprint, energy efficiency, ease of scale-up, and environmental benefits. Current research focuses on enhancing membrane performance in actual operating conditions by optimizing the equilibrium between selectivity and permeability to expand commercial and industrial applications. This balance between selectivity and permeability can be addressed by using mixed-matrix membranes (MMMs), which are formed by adding nanostructured fillers to the polymer to enhance its separation properties. In this scenario, covalent-organic frameworks (COFs) show considerable potential. COFs have generated significant interest in membrane separation owing to their stable organic structures, compatibility with polymers, and tailorable pore sizes and chemical functionalities. This review provides a systematic overview of COF-based MMMs for gas separation, distinguishing this work from previous reviews that broadly address other inorganic fillers incorporated into MMMs. The manuscript critically examines the physicochemical design principles and effective synthesis routes of COF fillers, their structure-performance relationships within polymer matrix, and, finally, their influence on gas transport behavior under practical operating conditions. Furthermore, a thorough examination of the challenges and opportunities of COF-based MMMs, along with recent advancements in the field, is conducted. The key benefits and drawbacks of using COFs with MOF as a double filler in MMM for gas separation are assessed with respect to permeability, selectivity, interfacial compatibility, and long-term stability. The review also provides recent advances in molecular modeling and machine-learning approaches for rational COF-based MMM design. Lastly, a summary of current research initiatives and potential future research directions is provided to accelerate the development of scalable and industrially viable COF-based MMMs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled synthesis of ZIF-8 nanoparticles in the 20-60 nm range

  • Selvin, Minu
  • Esteras-Saz, Javier
  • Coronas, Joaquín
The control of particle size of zeolitic imidazolate framework ZIF-8 is crucial due to the high impact of such parameter on the material properties, like crystallinity and surface area, with an important effect on emerging applications related to composite materials, molecular separations and encapsulation, among others. This study focuses on controlling the effect of several basic parameters to achieve different particle sizes below 100 nm with a narrow particle size distribution. Specifically, synthesis time, stirring speed, the addition of a deprotonator and its nature were systematically studied. As a result, ZIF-8 with average particle sizes of ca. 20 ± 4, 40 ± 6 and 60 ± 3 nm was successfully obtained. The different particle sizes were observed by SEM and compared with the corresponding crystallite size calculated from powder X-ray diffraction using different models. The strong correlation between both sizes validates the reliability of our different approaches to the synthesis of ZIF-8.