Pasar al contenido principal

OPTIMIZACION DE CAPTURA DE CO2 CON MEMBRANAS Y PROCESOS DE UTILIZACION PARA ACOPLAR LA ELECTROVALORIZACION DE CO2 A OXIDACIONES RELEVANTES BAJO CRITERIOS DE SOSTENIBILIDAD

PID2019-108136RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Single-Pass Electrooxidation of Glycerol on Bismuth-Modified Platinum Electrodes as an Anodic Process Coupled to the Continuous CO2 Electroreduction toward Formate

  • Peña-Rodríguez, Ailen
  • Fernández-Caso, Kevin
  • Díaz-Sainz, Guillermo
  • Álvarez-Guerra, Manuel
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
CO2 electroreduction has emerged as a promising strategy for reducing emissions while simultaneously generating valuable products, particularly formic acid/formate. To further enhance the sustainability of this process, the traditional oxygen evolution reaction at the anode can be replaced by a more interesting reaction like glycerol oxidation to high value-added products, in a covalorization approach. In this study, the effect of the presence of a bismuth (Bi) atom supplier (Bi2O3 particles) in the anolyte solution during the glycerol electrooxidation process on platinum (Pt) electrodes coupled with the electroreduction of CO2 to formate is investigated for the first time, operating in a continuous mode with a single pass through the reactor. The results reveal that in the cathode, significant HCOO– production, with Faradaic efficiencies reaching 93%, and modest energy consumption of 208 kW h·kmol–1 were obtained in the continuous CO2 electroreduction to formate using Bi gas diffusion electrodes. On the other hand, in the anode, the presence of Bi2O3 particles leads to a significant alteration in the distribution of high-value-added oxidation products obtained. For instance, the anode demonstrates remarkable dihydroxyacetone (DHA) production of 283 μmol·m–2·s–1, surpassing the results obtained with the nonmodified Pt electrodes. The performance of this system offers a promising pathway for the simultaneous coproduction of high-value-added products from both CO2 and glycerol.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Use of Chitosan as Copper Binder in the Continuous Electrochemical Reduction of CO2 to Ethylene in Alkaline Medium

  • Marcos-Madrazo, Aitor
  • Casado-Coterillo, Clara
  • Iniesta, Jesus
  • Irabien, Ángel
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
This work explores the potential of novel renewable materials in electrode fabrication for the electrochemical conversion of carbon dioxide (CO2) to ethylene in alkaline media. In this regard, the use of the renewable chitosan (CS) biopolymer as ion-exchange binder of the copper (Cu) electrocatalyst nanoparticles (NPs) is compared with commercial anion-exchange binders Sustainion and Fumion on the fabrication of gas diffusion electrodes (GDEs) for the electrochemical reduction of carbon dioxide (CO2R) in an alkaline medium. They were tested in membrane electrode assemblies (MEAs), where selectivity to ethylene (C2H4) increased when using the Cu:CS GDE compared to the Cu:Sustainion and Cu:Fumion GDEs, respectively, with a Faradaic efficiency (FE) of 93.7% at 10 mA cm−2 and a cell potential of −1.9 V, with a C2H4 production rate of 420 µmol m−2 s−1 for the Cu:CS GDE. Upon increasing current density to 90 mA cm−2, however, the production rate of the Cu:CS GDE rose to 509 µmol/m2s but the FE dropped to 69% due to increasing hydrogen evolution reaction (HER) competition. The control of mass transport limitations by tuning up the membrane overlayer properties in membrane coated electrodes (MCE) prepared by coating a CS-based membrane over the Cu:CS GDE enhanced its selectivity to C2H4 to a FE of 98% at 10 mA cm−2 with negligible competing HER. The concentration of carbon monoxide was below the experimental detection limit irrespective of the current density, with no CO2 crossover to the anodic compartment. This study suggests there may be potential in sustainable alernatives to fossil-based or perfluorinated materials in ion-exchange membrane and electrode fabrication, which constitute a step forward towards decarbonization in the circular economy perspective.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Chitosan-based mixed matrix composite membranes for CO2/CH4 mixed gas separation. Experimental characterization and performance validation

  • Torre-Celeizabal, Andrea
  • Casado-Coterillo, Clara
  • Gomis-Berenguer, Alicia
  • Iniesta, Jesus
  • Garea, Aurora
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Membrane technology is acknowledged as one of the most efficient for biogas upgrading, separating simultaneously CH4 and CO2 in the retentate and permeate streams, respectively. The sustainability would still be improved by using renewable and environmentally friendly materials for membrane fabrication. Specifically, this study is focused on laboratory-scale mixed gas separation tests of composite membranes prepared from chitosan (CS), a hydrophilic, biodegradable and biocompatible polymer from abundant natural resources, with good adhesive and film forming properties and high affinity for CO2 due to the primary amine and hydroxyl groups functionalities in CS. To improve mechanical resistance and CO2/CH4 separation, CS was hybridized by a 5wt.% loading of non-toxic ionic [emim][acetate] liquid (IL), and variable loadings of compatible inorganic fillers, such as 3D zeolite 4A and NaETS-10, and layered AM-4 titanosilicate. The CS-based mixed matrix layer was coated on porous polyether sulfone (PES) support. The CO2 permeance and CO2/CH4 separation was measured at different feed concentrations to evaluate the membranes performance in the treatment of different streams. This separation behavior was explained by the wet thickness, water uptake, morphology and ionic resistance of the composite membrane. As such, the 5 wt.% Zeolite 4A and NaETS-10-filled ILCS/PES membranes provided a good dispersion in the ILCS matrix and the mixed matrix layer a good adhesion with the porous PES support, leading to high CO2 permeances and separation factors up to 30, whereas the more hydrophilic lamellar AM-4 titanosilicate-filled ILCS layer showed cluster agglomeration in the matrix and a faster detachment of the coated layer from the PES substrate. With increasing filler loading, an increase of the permeance of both CO2 and CH4 gas components was, although selectivity decreased upon increasing AM-4 filler loading. The CO2/CH4 mixed gas separation performance was validated by a custom-built model for a wide range of feed composition, to cover such processes as natural gas sweetening, biogas upgrading and enhanced oil recovery with acceptable relative error below 10% (absolute value), except for the AM-4 titanosilicate-filled ILCS membranes, showing morphological fabrication defects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Continuous carbon dioxide electroreduction to formate coupled with the single-pass glycerol oxidation to high value-added products

  • Fernández-Caso, Kevin
  • Peña-Rodríguez, Ailen
  • Solla-Gullón, José
  • Montiel, Vicente
  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
CO2 electroreduction has been considered a promising alternative to simultaneously reduce CO2 emissions and produce value-added products. Among others, the production of formic acid/formate is particularly attractive. Although promising results have already been obtained in the literature, one of the recent approaches to improve the process deals with the use of an alternative reaction at the anode instead of the traditional oxygen evolution reaction (OER). In this context, this work reports, for the first time, the study of the CO2 electroreduction to formate coupled with the electrooxidation of glycerol to high-added value products where both half-reactions operate in a continuous mode with a single pass of the reactants through the electrochemical cell. Interestingly, at the cathode, similar results to those previously reported were obtained, reaching formate concentrations of about 18 g·L-1 at a 200 mA·cm-2. In addition, at the anode, promising dihydroxyacetone productions of 196 µmol·m-2·s-1 were simultaneously achieved in the output stream of the anodic compartment. These findings represent a significant step forward for the development and application of the technology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Coupling glycerol oxidation reaction using Ni-Co foam anodes to CO2 electroreduction in gas-phase for continuous co-valorization

  • Fernández-Caso, Kevin
  • Molera, Martí
  • Andreu, Teresa
  • Solla-Gullón, José
  • Montiel, Vicente
  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrocatalytic reduction of CO2 is a promising alternative for storing energy and producing valuable products, such as formic acid/formate. Continuous gas-phase CO2 electroreduction has shown great potential in producing high concentrations of formic acid or formate at the cathode while allowing the oxygen evolution or the hydrogen oxidation reactions to occur at the anode. It is advantageous to use a more relevant oxidation reaction, such as glycerol which is a plentiful by-product of current biodiesel production process. This work successfully manages to couple the glycerol oxidation reaction with continuous gas-phase CO2 electroreduction to formate with the implementation of Ni-Co foam-based anodes. The MEA-electrolyzer developed can achieve significantly high formate concentrations of up to 359 g L-1 with high Faradaic efficiencies of up to 95%, while also producing dihydroxyacetone at a rate of 0.434 mmol m−2 s−1. In comparison with existing literature, this represents an excellent trade-off between relevant figures of merit and can remarkably contribute to a future implementation of this coupled electrochemical system approach at larger scales.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Life cycle assessment and multi-objective optimization of biogas upgrading using chitosan based composite membranes

  • Dawood, Beheshta
  • Torre-Celeizabal, Andrea
  • Pina-Vidal, Cristina
  • Téllez, Carlos
  • Rumayor, Marta
  • Garea, Aurora
  • Casado-Coterillo, Clara
Biopolymer membranes, hybridized by non-toxic or renewable fillers are gaining attention on the preparation of membranes for CO2 separation, providing their flux and mechanical endurance is improved to provide environmental and economic viability as real alternatives in the decarbonization of the chemical industry. Cellulose acetate is the most commonly found natural biopolymer but its preparation needs organic solvents and it is prone to plasticization. Chitosan biopolymer can be produced from fish waste, but its mechanical resistance is limited due to its high hydrophilicity. In this work, chitosan was blended with cellulose acetate or starch, which can also be obtained from biowaste. The membranes were characterized by single N2, CH4 and CO2 gas permeation and also CO2/CH4 mixture separation. The CO2 permeance of CS:ST membranes was closer to commercial PDMS membrane, and the CO2/CH4 selectivity of CS:CA membranes was in the range of selective polymer membranes for this application. A sustainability assessment of the membrane fabrication was performed using Life Cycle Assessment with three environmental impact categories (ReCiPe midpoint method): Global warming, energy and materials depletion. A multi-objective optimization model was applied to optimize the process conditions in the simultaneous CO2 and CH4 recovery from model biogas feed stream optimal mass and energy balances. The optimized energy consumption for the separation was utilized on the evaluation of the cradle-to-gate environmental performance for the membranes attaining 90 % purity and recovery in CO2 and CH4 in the permeate and retentate outlet streams, respectively., Funding from regional government through “Contrato Programa Gobierno de Cantabria – UC”, the European Union for the Bio4HUMAN GA 101135144 Horizon Europe project and the Spanish State Research Agency for the project grant PID2019-108136RB-C31/AEI/10.13039/501100011033 are gratefully acknowledged. A.T.C. also acknowledges the AEI for the Early-Stage Researcher contract PRE2020-09765/aei/10.13039/50111000110333. Grant PID2022-138582OB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU is also recognized. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, “Laboratorio de Microscopías Avanzadas” node at the University of Zaragoza., Peer reviewed