Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocurable Polyurethane Acrylated Composites with Ionic Liquid-Laden Metal-Organic Framework for Energy Storage and Electronic Applications

  • Salado, Manuel
  • Fernández de Luis, Roberto
  • Andrio Balado, Andreu
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Polymer composites are suitable strategies for the development of advanced materials with tailored electrical properties, particularly relevant in electronics areas such as sensors, actuators, and solid electrolytes for energy storage applications. In this study, composites based on a polyurethane acrylated (PUA) matrix with metal-organic framework (MOF) nanoparticles (MOF-808) were prepared. Different amounts of the ionic liquid 1-ethyl-3-methylimidazolium thiocyanate ([EMIM][SCN]) were incorporated into the pores of the MOF-808 structure to tune the electrical response of the composite. The composites PUA/MOF/IL underwent characterization through electron microscopy for morphology analysis, X-ray diffraction (XRS) and Fourier transform infrared spectroscopy (FTIR) for the determination of the physical-chemical properties, and broadband dielectric spectroscopy (DRS) for assessing dielectric and conductive behavior. At the nanoscale, it is shown that when IL is infused into the MOF nanoparticles, the MOF pores saturate and the remaining IL stabilizes as an interphase on the surface of the MOF particles. DRS reveals that the main alpha-relaxation of the PUA chains is affected by the presence of MOFs and IL, while the secondary beta-relaxation, related to local fluctuations, remains unchanged. Furthermore, the conductivity process is dependent on the MOF:IL weight ratio, and the MOF saturation by IL impacts the dielectric behavior of the nanocomposites. This study provides valuable nanoscale insights into the interaction between MOF and IL and the dielectric behavior of PUA/MOF/IL composites, emphasizing the impact of MOF and IL additives on the relaxation processes and, in particular, on the electrical conductivity. The electrical properties of the developed materials show significant potential for their use as solid polymer electrolytes., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, and UID/EEA/04436/2020 and under projects, POCI- 01-0247-FEDER-046985, 10.54499/2022.03781.PTDC, and 10.54499/2022.03931.PTDC funded by national funds through FCT and by the ERDF through the COMPETE2020 Programa Operacional Competitividade e Internacionalizacao (POCI). NGS-New Generation Storage, C644936001-00000045, supported by IAPMEI (Portugal) with funding from the European Union NextGenerationEU (PRR). The authors also thank the FCT investigator contracts 2020.04028.CEECIND (DOI 10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) by Generalitat Valenciana and by the Basque Government under the IKUR program. The authors thank the financial support as well from the Spanish Agencia Estatal de Investigacion (AEI) through EVOLMOF PID2021-122940OB-C31 (AEI/FEDER, UE) (including FEDER financial support) and ENZYMOF (TED2021-130621B-C42) projects. The research was also supported by CIBER Consorcio Centro de Investigacion Biomedica en Red CIBER_BBN CB06/01/1026, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the compositional space of a metal–organic framework with ionic liquids to develop porous ionic conductors for enhanced signal and selectivity in VOC capacitive sensors

  • Gonçalves, Bruna F.
  • Fernández, Eduardo
  • Valverde, Ainara
  • Gaboardi, Mattia
  • Salazar, Hugo
  • Petrenko, Viktor
  • Porro, José María
  • Cavalcanti, Leide P.
  • Urtiaga, Karmele
  • Esperança, José M. S. S.
  • Correia, Daniela M.
  • Fernández-Alonso, Félix
  • Lanceros-Mendez, Senentxu
  • Fernández de Luis, Roberto
The monitoring of atmospheric pollutants, especially non-methane-based volatile organic compounds (NMVOCs), is an important paradigm towards secure air quality surroundings. However, existing gas sensing technologies face challenges in selectively and sensitively detecting individual NMVOCs due to their low concentration in comparison to the main atmospheric components. In this research, the compositional space between a Metal–Organic Framework (MOF) and Ionic Liquids (ILs) is explored to fine tune the signal and selectivity of a capacitive gas sensing layer. Firstly, by tuning the weight ratio of the MOF : IL components, ionic conductive materials ranging from solid porous to partially porous inks are produced. Secondly, by combining the sensitivity arising from the IL's dielectric characteristics with the selectivity endowed by the MOF's porosity, varied capacitive responses are obtained. Finally, the sensing responses of thirteen sensors towards the detection of water vapor, ethanol, acetone and isopropanol demonstrate that the hybridization of the MOF/IL offers a suitable avenue to balance the porosity, magnitude of response, and partial selectivity. In addition, when the responses of multiple MOF/IL sensors are evaluated, cross-selectivity detection of individual NMVOCs is reached. This approach contributes to fine-tuning the MOF/IL sensor performance not just by expanding the MOF/IL combinations, but optimizing sensor processing by advanced printing and electronics design., Financial support for this work has been secured through Grants PID2020-114506GB-I00 funded by MCIN/AEI/10.13039/501100011033; TED2021-129457B-I00 funded by MCIN/AEI/10.13039/501100011033, EVOLMOF PID2021-122940OB-C31 (AEI/FEDER, UE) (including FEDER financial support), ENZYMOF (TED2021-130621B-C42). This study forms part of the Advanced Materials Programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). We acknowledge the continued support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center and BCMaterials on behalf of the Department of Education of the Basque Government. Basque Government Industry and Education Departments under the ELKARTEK and PIBA (PIBA-2022-1-0032) programs are also acknowledged. The MSCA-RISE-2017 (No. 778412) INDESMOF, which received funding from the European Union's Horizon 2020 Research and Innovation Programme, is also acknowledged. Finally we acknowledge the Portuguese Foundation for Science and Technology (FCT) through projects UID/QUI/00686/2020, UIDB/50006/2020, UIDP/50006/2020, LA/P/0008/2020, and 2022.05932.PTDC and an investigator FCT Contract 2020.02915.CEECIND (D. M. C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative starch-PVA membranes incorporating amino-functionalized Zeolitic Imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Amenakpor, Jacking
  • Coronas, Joaquín
  • Zornoza, Beatriz
The growing need for efficient CO2 separation in natural gas purification and carbon capture has driven the advancement of high-performance membrane technologies. This study incorporates the zeolitic imidazolate framework ZIF-8-NH2 into blends of polysaccharide starch and polyvinyl alcohol (PVA) to fabricate eco-friendly membranes. These materials, prepared as dense mixed matrix membranes (MMMs) and thin-film nanocomposite (TFN) membranes, offer a sustainable solution for CO2/CH4 separation. The integration of ZIF-8-NH2 nanoparticles, recognized for their high crystallinity and surface area and selective adsorption capacity into the starch–PVA matrix (33/67 blend ratio), significantly enhances CO2 permeability, increasing from 124 to 188 Barrer at 10 wt% loading, while preserving high CO2/CH4 selectivity (14.1 for the pristine blend and 16.5 for the MMM). For TFNs, a 9/91 starch-PVA matrix with 15 wt% ZIF-8-NH2 incorporated into the selective layer resulted in the best conditions. This architecture provided robust mechanical stability and high separation performance, yielding a CO2 permeance of up to 208 GPU and a CO2/CH4 selectivity of 26.9 at 3 bar feed pressure, nearly doubling the selectivity compared to the dense biopolymer blend. This work highlights the potential of renewable, starch-based materials in membrane-based gas separation, contributing to sustainable solutions for natural gas purification and carbon capture., B. Zornoza acknowledges the grant RYC2022-038139-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. This work was supported by grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033 and the European Union-Next Generation EU), and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial assistance was also provided by the Government of Aragon (T68_23R). The authors would like to thank the Universidad de Zaragoza for the use of “Servicio General de Apoyo a la Investigación-SAI” and the use of instrumentation as well as the technical support and access to the National Facility ELECMI ICTS, “Laboratorio de Microscopias Avanzadas”, at the “Universidad de Zaragoza”. Finally, J. Amenakpor thanks the European Commission - Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Master in Membrane Engineering for Sustainable Development, MESD, Project number: 101081874, Call: ERASMUS-EDU-2022-PEX-EMJM-MOB., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shaping hierarchical porosity beads from metal–organic framework powders using freeze spherification

  • Quindimil, Adrián
  • Fernández de Luis, Roberto
  • Wuttke, Stefan
  • Gurauskis, Jonas
Microporous powdered Metal-Organic Frameworks (MOFs) shaped by conventional mechanical densification methods (e.g., pelletization, granulation) present internal diffusion limitations and pressure drops that limit their technological leap to industrial applications. Therefore, the ongoing search for novel shaping methods that could manufacture controlled hierarchical porous structures with enhanced diffusion, high surface area, crystallinity, and mechanical robustness is needed. In this work, a freeze spherification method is developed to shape MOF-808 powder into spherical beads with hierarchical micro/macro porosity. The optimum spherical bead composition, in terms of suspension solids loading (10, 20, or 30 vol %) and hydroxypropyl methylcellulose (HPMC) binder content (30, 25, and 20 wt %), is determined by considering the bulk density, MOF surface accessibility, and the formation of a highly permeable porous structure in the final beads. The MOF-808 in powder and spherical bead forms is characterized by PXRD, IR, TGA, SEM, N2 physisorption, and mercury porosimetry. The analyses confirm the formation of hierarchically ordered porosity with varying pore sizes, morphologies, and MOF coating degrees, which depend on both suspension solids loading and binder content. The combination of MOF-808 with the HPMC binder does not affect its crystallinity, but a reduction of the binder content of 30 vol % beads from 30 to 25 wt % is key to retain 86% of the MOF-808 surface area . Noteworthy, the beads processed under optimum conditions exhibit sufficient mechanical integrity and superior accessibility, highlighting freeze spherification as a promising shaping method to bring powdered MOF-based catalysts and adsorbents to real-world applications., The authors acknowledge the financial support of the European Union–Next Generation EU and the Ministerio de Ciencia e Innovación (Spain) through the coordinated action “GreenLiFTech” in the framework of the subprojects N-GasCat (TED2021-130621B–C41) and ENZYMOF (TED2021-130621B–C42). The authors also acknowledge the technical support and instrumentation provided by “ELECMI ICTS Laboratorio de Microscopías Avanzadas (LMA)” and “Servicio General de Apoyo a la Investigación (SAI)” of the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed matrix membranes of PIM-1 incorporating MOF-808 functionalized with amino acids for enhanced CO2/CH4separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Martínez-Hernández, Harol David
  • Jimenez-Ruiz, Monica
  • Galván, Vanessa
  • Petrenko, Viktor
  • Fernández de Luis, Roberto
  • Coronas, Joaquín
This study investigates the enhancement of CO2/CH4 separation performance in mixed matrix membranes (MMMs) by incorporating amino acid-functionalized MOF-808 (MOF-808@AA; AA = Lys, Arg and Cys) into a polymer of intrinsic microporosity (PIM-1) matrix. MMMs containing 10 wt% MOF-808@AA were fabricated via solution casting. The structural and physicochemical properties of PIM-1, MOF-808@AA, and the resulting MMMs were characterized using 1H-NMR, FTIR, TGA, SEM, XRD, SAXS, N2/77 K and CO2/15 °C isotherms, and high-pressure CO2 adsorption. Collectively, the characterization results confirm the successful incorporation of MOF-808@AA into the PIM-1 membranes, with no detectable alteration of the nanostructure of the PIM-1 matrix. Gas separation measurements revealed a notable increase in both CO2 permeability and CO2/CH4 selectivity upon incorporation of MOF-808@AA fillers. Among the tested membranes, the PIM-1/MOF-808@Lys MMM functionalized with lysine exhibited the best performance, achieving a CO2 permeability of 14 354 ± 201 Barrer and a CO2/CH4 selectivity of 26.4 ± 1.8. Aging effects were also studied, showing a reduction in CO2 permeability accompanied by a slight increase in selectivity over time. In addition, the single and mixed gas experiments at elevated pressures (up to 6 bar) showed that CO2 permeability under mixed gas conditions was slightly higher than in single gas experiments, supporting the potential of these MMMs for application in realistic CO2/CH4 separation processes under practical operating conditions. Inelastic neutron scattering (INS) and density functional theory (DFT) calculations confirmed that CO2 molecules preferentially interact with the amino groups introduced by AA functionalization. DFT simulations further revealed that while CO2 and CH4 access similar adsorption sites, the interaction energy of CO2 with amino groups is approximately three times higher than that of CH4. These findings demonstrate that MOF-808@AA fillers can significantly enhance the CO2-philicity of PIM-1-based MMMs, offering a promising approach for efficient CO2/CH4 separation compared to pristine PIM-1 or unmodified PIM-1/MOF-808 composites., This investigation received financial support through multiple funding sources: MCIN/AEI/10.13039/501100011033 and ERDF (“A way of making Europe”) provided support via grants PID2022-138582OB-I00 and PID2021-122940OB-C31; the European Union's NextGenerationEU program and MCIN/AEI/10.13039/501100011033 jointly funded TED2021-130621B-C4; and MICIU/AEI/10.13039/501100011033 supported CEX2023-001286-S. Researcher M. Yahia was supported through the María Zambrano fellowship program, financed by both the European Union's NextGenerationEU initiative and Spain's Ministerio de Universidades. Additional financial backing came from the Government of Aragón (T68_23R). The research team expresses sincere appreciation for the technical resources and instrumentation made available by Universidad de Zaragoza, particularly through the ELECMI ICTS Laboratorio de Microscopías Avanzadas national research facility and the Servicio General de Apoyo a la Investigación-SAI. H. D. Martinez-Hernandez acknowledges the Institute Laue-Langevin and the Spanish MCIN for his PhD/CFR contract (Reference: ESP-2-2023)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Shaping Hierarchical Porosity Beads from Metal–Organic Framework Powders Using Freeze Spherification

  • Quindimil, Adrián
  • Fernández de Luis, Roberto
  • Wuttke, Stefan
  • Gurauskis, Jonas
Microporous powdered Metal–Organic Frameworks (MOFs) shaped by conventional mechanical densification methods (e.g., pelletization, granulation) present internal diffusion limitations and pressure drops that limit their technological leap to industrial applications. Therefore, the ongoing search for novel shaping methods that could manufacture controlled hierarchical porous structures with enhanced diffusion, high surface area, crystallinity, and mechanical robustness is needed. In this work, a freeze spherification method is developed to shape MOF-808 powder into spherical beads with hierarchical micro/macro porosity. The optimum spherical bead composition, in terms of suspension solids loading (10, 20, or 30 vol %) and hydroxypropyl methylcellulose (HPMC) binder content (30, 25, and 20 wt %), is determined by considering the bulk density, MOF surface accessibility, and the formation of a highly permeable porous structure in the final beads. The MOF-808 in powder and spherical bead forms is characterized by PXRD, IR, TGA, SEM, N2 physisorption, and mercury porosimetry. The analyses confirm the formation of hierarchically ordered porosity with varying pore sizes, morphologies, and MOF coating degrees, which depend on both suspension solids loading and binder content. The combination of MOF-808 with the HPMC binder does not affect its crystallinity, but a reduction of the binder content of 30 vol % beads from 30 to 25 wt % is key to retain 86% of the MOF-808 surface area . Noteworthy, the beads processed under optimum conditions exhibit sufficient mechanical integrity and superior accessibility, highlighting freeze spherification as a promising shaping method to bring powdered MOF-based catalysts and adsorbents to real-world applications.