Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Piezoelectric Stimulation Induces Osteogenesis in Mesenchymal Stem Cells Cultured on Electroactive Two-Dimensional Substrates

  • Guillot-Ferriols, Maria
  • Costa, Carlos M.
  • Correia, Daniela M.
  • Tsimbouri, Penelope M.
  • Lanceros-Mendez, Senentxu
  • Dalby, Matthew J.
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Physical cues have been shown to be effective in inducing osteogenic differentiation of mesenchymal stem cells (MSCs). Here, we propose piezoelectric stimulation as a potential osteogenic cue mimicking the electroactive properties of bone's extracellular matrix. When combined with a magnetostrictive component, piezoelectric polymers can be used for MSC stimulation by applying an external magnetic field. The deformation of the magnetostrictive component produces a deformation in the polymer matrix, generating a change in the surface charge that induces an electric field that can be transmitted to the cells. Cell adhesion, cytoskeleton changes, and metabolomics are the first evidence of MSC osteoblastogenesis and can be used to study initial MSC response to this kind of stimulation. In the current study, poly(vinylidene) fluoride (PVDF) piezoelectric films with and without cobalt ferrite oxide (CFO) crystallized from the melt in the presence of the ionic liquid 1-butyl-3-methyl-imidazolium chloride ([Bmim][Cl]) were produced. [Bmim][Cl] allowed the production of the beta-phase, the most electroactive phase, even without CFO. After ionic liquid removal, PVDF and PVDF-CFO films presented high percentages of the beta-phase and similar crystalline content. Incorporating CFO nanoparticles was effective, allowing the electromechanical stimulation of MSCs by applying a magnetic field with a bioreactor. Before stimulation, the initial response of MSCs was characterized in static conditions, showing that the produced films were biocompatible and noncytotoxic, allowing MSC adhesion and proliferation in the short term. Stimulation experiments revealed that MSCs electromechanically stimulated for 3 days in PVDF-CFO supports showed longer focal adhesions and decreased vimentin cytoskeletal density, both signals of early osteogenic differentiation. Furthermore, they rearranged their energy metabolism toward an osteogenic phenotype after 7 days of culture under the same stimulation. The results prove that MSCs respond to electromechanical stimulation by osteogenic differentiation., This work was supported by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 through the PID2022 138572OB-C41 and C42 projects and the CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/1026), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. M.G.F. received government funding for her Doctoral Thesis [Grant Number BES-2017 080398FPI]. The authors thank FCT (Fundação para a Ciência e a Tecnologia) for financial support under the framework of Strategic Funding grant UID/FIS/04650/2021, UID/QUI/00686/2020, projects 10.54499/2022.05932.PTDC, and 10.54499/2022.03931.PTDC and contract under the Stimulus of Scientific Employment, Individual Support 2020.02915.CEECIND/CP1600/CT0029, (10.54499/2020.02915.CEECIND/CP1600/CT0029) (DMC) and 2020.04028.CEECIND (DOI: 10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.). We also acknowledge EPSRC program grant EP/P001114/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increased electroactive properties of poly(vinylidene fluoride) films by thermo-mechanical post-processing

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Pereira, N.
  • Costa, C. M.
  • Lanceros-Mendez, S.
[EN] Due to its outstanding electroactive properties, poly(vinylidene fluoride) (PVDF) is widely used in the energy, electronic, and biomedical fields. In particular, the highly polar and electroactive ß-phase obtained by low temperature solvent evaporation has numerous technological applications due to its piezo-, pyro- and ferroelectric properties, but typically presents a porous morphology. PVDF membranes were prepared by non-solvent induced phase separation (NIPS) from a dimethylformamide (DMF) solution, and post-processed by thermo-mechanical compression under varying temperature and pressure to produce solid films. The effect of these parameters on the morphology, ß-phase content, thermal properties, crystalline phase content and piezoelectric response was evaluated. Thermo-mechanical treatment reduces porosity leading to a compact morphology, while also increases the ßphase content and the degree of crystallinity. Also, it enhances the mechanical properties and increases the piezoelectric value. It is to notice that this simple processing method is compatible with the large-scale manufacturing of electroactive PVDF samples in an industrial setting., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UID/ 04650: Physics Centre of Minho and Porto Universities (CF-UM-UP), UID/FIS/04650/2020 and Project 10.54499/2022.03931.PTDC. The authors also thank the FCT for financial support under FCT investigator contract 2020.04028.CEECIND (DOI: 10.54499/2020.04028. CEECIND/CP1600/CT0018) (C.M.C.). The authors thank the Basque Government Industry Departments for funding under the Elkartek program. The work of the Spanish group has been funded by MCIN/AEI/10.13039/501100011033/FEDER Grants PID2022-138572OB-C41 and -C42 and by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization, as well as Carolina from the Food Engineering University Institute for helping in DSC characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the electrical conductivity of Poly(vinylidene fluoride) by blending with poly (3,4-ethylenedioxythiophene) Polystyrene sulfonate (PEDOT:PSS) and ionic liquids

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Andrio Balado, Andreu
  • Correia, Daniela M.
  • Fernandes, Liliana
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
[EN] In order to tailor dielectric response and electrical conductivity, novel polymer blends based on poly(vinylidene fluoride (PVDF) and different fillers composed by poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), and PEDOT:PSS/ionic liquids (ILs): PEDOT:PSS/N-ethyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide ([C(2)mpyr][FSI]) and PEDOT:PSS/N-ethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([C(2)mpyr][TFSI]), with different PEDOT:PSS/IL contents (10, 20 and 40 wt%) were prepared through solvent casting. The morphological, physical-chemical and thermal properties of the polymer blends were evaluated, together with the influence of PEDOT:PSS/IL on the PVDF crystallization kinetics, dielectric and electrical conductivity.The incorporation of PEDOT:PSS/IL in the polymer matrix lead to a decrease of the PVDF spherulites. Furthermore, it was detected that both PEDOT:PSS and IL act as nucleation agents, promoting the homogeneous crystallization of PVDF as well as the crystallization into its b and g polar phases. The electrical conductivity formalism revealed significant contributions of PEDOT:PSS/IL to the electrical conductivity behavior of the blends, being thermally activated and described by the charge transport mechanism. Further, the dc conductivity increases due to the higher number of charge carriers of the PEDOT:PSS/IL content.The tailorable electrical characteristics of the PVDF/PEDOT:PSS-IL blends demonstrate their potential for applications in areas such as ionic actuators and battery devices., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, UID/EEA/04436/2020, and UID/QUI/0686/2020 and under projects, MIT-EXPL/TDI/0033/2021, 2022.03931. PTDC and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under grant SFRH/BD/145345/2019 (L.F.), and FCT investigator contracts 2020.02915. CEECIND (D.M.C), and 2020.04028. CEE-CIND (C.M.C.). Financial support from the Basque Government Industry Department under the ELKARTEK program is acknowledged. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU).This work was funded by the Spanish State Research Agency (AEI) through the Grant number PID2022-138572OB-C41 and PID2022-138572OB-C42. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Micro-scopy Service of the UPV (Universitat Politecnica de Valencia) is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Serra, J. P.
  • Correia, Daniela M.
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
[EN] The influence ofthe inclusion of the organic solvent propylenecarbonate (PC) in microporous membranes based on poly-(l-lacticacid) (PLLA) and poly-(vinylidene fluoride-co-hexafluoropropylene)P-(VDF-HFP) has been studied based on its relevance for the applicationof those separator membranes in lithium-ion batteries. The membraneshave been produced through solvent casting and characterized withrespect to the swelling ratio originated by the uptake of the organicsolvent. The organic solvent uptake affects the porous microstructureand crystalline phase of both membrane types. The organic solventuptake amount affects the crystal size of the membranes as a consequenceof the interaction between the solvent and the polymer, since thepresence of the solvent modifies the melting process of the polymercrystals due to a freezing temperature depression effect. It is alsoshown that the organic solvent partially penetrates into the amorphousphase of the polymer, leading to a mechanical plasticizing effect.Thus, the interaction between the organic solvent and the porous membraneis essential to properly tailor membrane properties, which in turnwill affect lithium-ion battery performance., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, UID/EEA/04436/2020, and UID/QUI/0686/2020 and under projects, MIT-EXPL/TDI/0033/2021, 2022.03931.PTDC, and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under grant 2021.08158.BD (J.P.S.), and FCT investigator contracts 2020.02915.CEECIND (D.M.C.) and 2020.04028.CEECIND (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next GenerationEU (PRTR-C17.I1) and by the Basque Government under the IKUR and Elkartek programs. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU). The work of the Spanish teams was funded by MCIN/AEI/10.13039/501100011033 Grants PID2019-106099RB-C41 and -C43. CIBER de Bioingenieria, Biomateriales y Nanomedicina is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the Universitat Polite`cnica de Vale`ncia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isothermal crystallization of poly(vinylidene fluoride) blended with the ionic liquid [Emim]2[Co(SCN)4]: Simultaneous analysis of crystalline phases by infrared spectroscopy and differential scanning calorimetry

  • Martins, Luis A.
  • Gomez Ribelles, Jose Luis
  • Costa, Carlos M.
  • Correia, Daniela M.
  • Lanceros-Méndez, Senentxu
  • Krakowsky, Ivan
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
[EN] The combination of poly (vinylidene fluoride) (PVDF) with ionic liquids (ILs) is increasingly being studied for the development of smart materials. Together with the functional response provided by the IL, its incorporation into PVDF allows to nucleate specific electroactive phases of the polymer, depending on the processing conditions. Thus, the isothermal crystallization of PVDF incorporating different contents of the magnetic ionic liquid bis(1ethyl-3-methylimidazolium) tetrathiocyanatocobaltate ([Emim]2 [Co(SCN)4]) is reported in this work. Morphological properties of the films were obtained by field emission scanning electronic microscopy (FESEM), and particularly, for the higher contents of IL, segregation was observed through artifacts present on the film surface. This fact has been further confirmed by energy-dispersive x-ray spectroscopy (EDX). The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been analyzed by Fourier transform infrared (FTIR) spectroscopy. Although alpha, beta and gamma crystalline phases were present in all samples, their relative percentages varied greatly with the amount of IL present, demonstrating that [Emim]2 [Co(SCN)4] is a strong inductor of the electroactive (EA) phases of PVDF. By evaluating both FTIR and DSC data, this effect has been ascribed to the higher melting temperatures of the EA structures whose formation is favored at higher crystallization temperatures. The melting temperature (Tm) of the beta phase is higher than that of the alpha phase, whereas Tm for the gamma phase is higher than for alpha and beta phases. Thus, together with the specific functional properties provided by the IL, such as magnetic response and ionic conductivity, the addition of [Emim]2 [Co(SCN)4] strongly influences PVDF's crystallization kinetics, proving to be a simple and very effective way to nucleate specific phases of PVDF, according also to the specific processing conditions., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UID/FIS/04650/2020, and UID/QUI/0686/2020 and under projects 10.54499/2022.03931. PTDC, 2022.05932. PTDC and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under FCT investigator contracts 2020.02915. CEECIND (D.M. C) , and 10.54499/2020.04028. CEECIND/CP1600/CT0018 (C.M.C.) . The authors thank the Basque Government Education and Industry departments for funding under the IKUR and Elkartek programs, respectively. The work of the Spanish group has been funded by the Universitat Politecnica de Valencia though the "Aid to First Research Projects (PAID-06-22), Vice-rectorate of Research of the Universitat Politecnica de Valencia (UPV)", and by the Generalitat Valenciana (GVA) through a grant for stays of Doctorate academic and research staff in research centers located outside the Valencian Community convened by Resolution of October 6, 2022, of the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (DOGV num. 9449/September 14, 2021) . This research was supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fabrication of high-performance electroactive poly(vinylidene fluoride)/ magnetic nanoparticle composites via mechanical compression for deformation sensing sensor

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Pereira, Nelson
  • Mendes-Felipe, Cristian
  • Costa, Carlos Miguel
  • Lanceros-Mendez, Senentxu
[EN] Poly(vinylidene fluoride) (PVDF) has applicability in several areas, from sensors and actuators to energy generation and storage, mainly based on its excellent electroactive properties: piezo-, pyro- and ferroelectricity. In particular, a highly polar and electroactive beta-phase, which is produced through low-temperature solvent evaporation, can be further tuned by the addition of magnetic particles, allowing magnetic and magnetoelectric response. PVDF membranes with two different magnetic particles, cobalt ferrite (CFO) and iron magnetite nanoparticles (FE) were prepared by non-solvent induced phase separation (NIPS) with a particle content of 10 wt% and post-processed by mechanical pressing to obtain a compact morphology. The effect of mechanical compression regarding the morphology, crystalline phase content, electroactive beta-phase content, thermal properties and piezoelectric response of both types of composites were assessed. Mechanical compression results in a compacted structure with decreased porosity, increased beta phase content and piezoelectric constant, with decreased overall crystallinity. To prove the material's functional applicability, a highly responsive deformation sensor was developed based on the CFO composite, proving that this straightforward processing technique is appropriate for producing electroactive PVDF samples on a large scale for applications in the electronic industry., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/04650/2025 and project 10.54499/2022.03931.PTDC. The authors also thank the FCT for financial support under FCT investigator contract 2020.04028.CEECIND (DOI: 10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.) . This research was funded by project BIO-IMP_ACE_MAS_6_E, co-funded by the European Union through the Interreg VI-A Spain-Portugal Programme (POCTEP) 2021-2027. LAM, SLM and JLGR acknowledges support by PID2022-138572OB-C41 and C42 projects funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors thank the Basque Government Industry Departments for funding under the Elkartek program. This research was supported by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

  • Guillot-Ferriols, María Teresa
  • Tolosa, Laia
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regeneration therapy results. Piezoelectric stimulation may be an effective cue to promote MSCs pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive microspheres. Microspheres were produced by electrospray technique, favouring CFO incorporation, crystallisation in beta-phase (85%) and a crystallinity degree of around 55%. The absence of cytotoxicity of the 3D construct was confirmed 24 h after cell encapsulation. Cells were viable, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in the short or long term. Nevertheless, piezoelectric stimulation upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic differentiation pathway. These results open the door for optimising a stimulation protocol allowing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation., This research was funded by Spanish State Research Agency (AEI), G.G.F. acknowledges the support of the PID2019-106000RB-C21/AEI/10.13039/501100011033 project, J.L.G.R. and S.L.-M. acknowledge the support of the PID2019-106099RB-C41 and -C43/AEI/10.13039/501100011033 projects. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. M.G.-F. received government funding for her doctoral thesis, grant number BES-2017-080398. The authors thank FCT (Fundacao para a Ciencia e a Tecnologia) for financial support under the framework of Strategic Funding grant number UID/FIS/04650/2021, projects PTDC/FIS-MAC/28157/2017 and POCI-01-0145-FEDER-007688, and contract under the Stimulus of Scientific Employment, Individual Support 2020.04028 CEECIND (C.M.C.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crystallization Monitoring of Semicrystalline Poly(vinylidene fluoride)/1-Ethyl-3-methylimidazolium Hexafluorophosphate [Emim][PF6] Ionic Liquid Blends

  • Correia, Daniela M.
  • Costa, Carlos M.
  • Krakovsky, Ivan
  • Lanceros-Méndez, Senentxu
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The electroactive characteristics of poly(vinylidene fluoride) (PVDF) are widely and increasingly being used in technological applications, where controlling the crystallization of the PVDF is of utmost importance. The nucleation and growth of crystals in the beta or. electroactive phases, or in the nonelectroactive a phase, depends on a number of factors that, despite the studies carried out, are still to be properly understood, in particular, when blended with specific active fillers. In this context, the crystallization of PVDF blended with the ionic liquid (IL) 1-ethyl-3-methylimidazolium hexafluorophosphate ([Emim][PF6]) has been analyzed. Both components are capable of crystallizing from the melt. The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been monitored using Fourier transform infrared (FTIR) spectroscopy. The isothermal crystallization kinetics of PVDF and the melting temperatures of both PVDF and IL were characterized by differential scanning calorimetry, and the microstructures of the blends were analyzed by optical and electron microscopy. It is observed for [Emim][PF6]/PVDF blends that the isothermal crystallization from the melt between 120 and 162 degrees C produces PVDF crystallites in the beta and. electroactive phases, while the formation of a-phase crystals is nearly suppressed. The morphology of the blends is altered by the addition of IL, which results in the separation of solid phases at room temperature. In addition, [Emim][PF6] remains liquid when mixed with the amorphous PVDF chains due to the cryoscopic descent., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019. The authors thank FEDER funds through the COMPETE 2020 Program and National Funds through FCT under the projects PTDC/BTM-MAT/28237/2017, PTDC/EEI-SII/5582/2014, and PTDC/FIS-MAC/28157/2017. D.M.C. thank the FCT for grant SFRH/BPD/121526/2016 and C.M.C. for the Investigator FCT Contract 2020.04028.CEECIND. The work of the Spanish groups has been funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project and from the Basque Government Industry and Education Departments under the ELKARTEK and PIBA (PIBA-2018-06) programs, respectively. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broadband dielectric response of silk Fibroin/BaTiO3 composites: Influence of nanoparticle size and concentration

  • Costa, C.M.
  • Reizabal, A.
  • Andrio Balado, A.
  • Pérez-Álvarez, L.
  • Vilas-Vilela, J.L.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In order to advance towards more sustainable electronics generation, natural polymers with tailored dielectric response are essential. In this search, the combination of bio-based materials with active fillers in composite form, suppose one of the most viable alternatives. To achieve it, this work has explored the ability to control dielectric response of Silk Fibroin, a protein polymer by its combination with ceramic barium titanate (BaTiO3) nanoparticles. Both the effect of filler concentration (0, 5, 10, 20 and 40 wt%) and size (100 and 200 nm) has been studied in composites processed by easily scalable techniques. Samples with a homogeneous distribution of nanoparticles have been obtained. Dielectric relaxation processes assessed by broadband dielectric relaxation spectroscopy (BDS) in wide frequency (0.1 Hz-1 MHz) and temperature ranges (- 40 to 220 degrees C), revealed a dielectric constant increasing with filler content and decreasing with filler size, ranging from 4.4 for SF up to 142 for the SF/BaTiO3 composite with 40 wt %, at room temperature and 1 kHz. Two relaxations processes are observed, the beta-relaxation and the conductivity relaxation, both with temperature-dependent behaviour. The activation energy of the conductivity process decreases with increasing nanoparticle content and decreasing size. A Maxwell-Wagner-Sillar process related to the interface between the silk fibroin matrix and the BaTiO3 nanoparticles was also identified., The authors thank the FCT (Fundacao para a Ciencia e Tecnologia) for financial support under the framework of Strategic Funding grants UID/FIS/04650/2019, and UID/EEA/04436/2019; and project PTDC/FIS-MAC/28157/2017. The author also thanks the FCT for financial support under grant SFRH/BPD/112547/2015 and Investigator FCT Contract 2020.04028.CEECIND (C.M.C.) as well POCH and European Union. Financial support from the Spanish Ministry of Science and Innovation (MCINN, Agencia Estatal de Investigacion) through the project RTI2018-097862-B-C21 and MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocurable Polyurethane Acrylated Composites with Ionic Liquid-Laden Metal-Organic Framework for Energy Storage and Electronic Applications

  • Salado, Manuel
  • Fernández de Luis, Roberto
  • Andrio Balado, Andreu
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Polymer composites are suitable strategies for the development of advanced materials with tailored electrical properties, particularly relevant in electronics areas such as sensors, actuators, and solid electrolytes for energy storage applications. In this study, composites based on a polyurethane acrylated (PUA) matrix with metal-organic framework (MOF) nanoparticles (MOF-808) were prepared. Different amounts of the ionic liquid 1-ethyl-3-methylimidazolium thiocyanate ([EMIM][SCN]) were incorporated into the pores of the MOF-808 structure to tune the electrical response of the composite. The composites PUA/MOF/IL underwent characterization through electron microscopy for morphology analysis, X-ray diffraction (XRS) and Fourier transform infrared spectroscopy (FTIR) for the determination of the physical-chemical properties, and broadband dielectric spectroscopy (DRS) for assessing dielectric and conductive behavior. At the nanoscale, it is shown that when IL is infused into the MOF nanoparticles, the MOF pores saturate and the remaining IL stabilizes as an interphase on the surface of the MOF particles. DRS reveals that the main alpha-relaxation of the PUA chains is affected by the presence of MOFs and IL, while the secondary beta-relaxation, related to local fluctuations, remains unchanged. Furthermore, the conductivity process is dependent on the MOF:IL weight ratio, and the MOF saturation by IL impacts the dielectric behavior of the nanocomposites. This study provides valuable nanoscale insights into the interaction between MOF and IL and the dielectric behavior of PUA/MOF/IL composites, emphasizing the impact of MOF and IL additives on the relaxation processes and, in particular, on the electrical conductivity. The electrical properties of the developed materials show significant potential for their use as solid polymer electrolytes., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, and UID/EEA/04436/2020 and under projects, POCI- 01-0247-FEDER-046985, 10.54499/2022.03781.PTDC, and 10.54499/2022.03931.PTDC funded by national funds through FCT and by the ERDF through the COMPETE2020 Programa Operacional Competitividade e Internacionalizacao (POCI). NGS-New Generation Storage, C644936001-00000045, supported by IAPMEI (Portugal) with funding from the European Union NextGenerationEU (PRR). The authors also thank the FCT investigator contracts 2020.04028.CEECIND (DOI 10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) by Generalitat Valenciana and by the Basque Government under the IKUR program. The authors thank the financial support as well from the Spanish Agencia Estatal de Investigacion (AEI) through EVOLMOF PID2021-122940OB-C31 (AEI/FEDER, UE) (including FEDER financial support) and ENZYMOF (TED2021-130621B-C42) projects. The research was also supported by CIBER Consorcio Centro de Investigacion Biomedica en Red CIBER_BBN CB06/01/1026, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

  • Guillot Ferriols, María Teresa
  • Tolosa Pardo, Laia
  • Costa, Carlos Miguel
  • Lanceros-Mendez, Senentxu
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regen-eration therapy results. Piezoelectric stimulation may be an effective cue to promote MSC pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive mi-crospheres. Microspheres were produced by electrospray technique, favouring CFO incorpora-tion, crystallisation in -phase (85 %) and a crystallinity degree of around 55 %. The absence of cytotoxicity of the 3D construct was confirmed 24 hours after cell encapsulation. Cells were via-ble, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in short or long term. Nevertheless, piezoelectric stimula-tion upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic dif-ferentiation pathway. These results open the door for optimising a stimulation protocol allow-ing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation.