Pasar al contenido principal

HIDROGELES BIOMIMETICOS IMPRIMIBLES CON PRESENTACION DE FACTORES DE CRECIMIENTO EFICIENTE PARA ESTUDIOS DE HEPATOTOXICIDAD DE ALTO RENDIMIENTO

PID2019-106000RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Oxidized Polysaccharides for In Situ Forming Hydrogels

  • Muhammad, Muhammad
  • Willems, Christian
  • Rodríguez-Fernández, Julio
  • Groth, Thomas
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Polysaccharides are widely used as building blocks of scaffolds and hydrogels in tissue engineering, which may require their chemical modification to permit crosslinking. The goal of this study was to generate a library of oxidized alginate (oALG) and oxidized hyaluronic acid (oHA) that can be used for in situ gelling hydrogels by covalent reaction between aldehyde groups of the oxidized polysaccharides (oPS) and amino groups of carboxymethyl chitosan (CMC) through imine bond formation. Here, we studied the effect of sodium periodate concentration and reaction time on aldehyde content, molecular weight of derivatives and cytotoxicity of oPS towards 3T3-L1 fibroblasts. It was found that the molecular weights of all oPs decreased with oxidation and that the degree of oxidation was generally higher in oHA than in oALG. Studies showed that only oPs with an oxidation degree above 25% were cytotoxic. Initial studies were also done on the crosslinking of oPs with CMC showing with rheometry that rather soft gels were formed from higher oxidized oPs possessing a moderate cytotoxicity. The results of this study indicate the potential of oALG and oHA for use as in situ gelling hydrogels or inks in bioprinting for application in tissue engineering and controlled release., This work was supported by the Deutscher Akademischer Austauschdienst DAAD (grant No. 91605199 to MM) and Deutsche Forschungsgemeinschaft (grant Gr1290/11-1 to TG). The kind support by Spanish State Research Agency (AEI) through the PID2019-106000RB-C21/AEI/10.13039/501100011033 project (including the FEDER financial support) to GGF is acknowledged. We acknowledge the financial support within the funding programme "Open Access Publishing" by the German Research Foundation (DFG).We are very thankful to Andrea Liedmann for her guidance during the cell experiments and Alexandros Repanas for his help during the synthesis and characterization of oPs and data analyses. Furthermore, Marie-Luise Trutschel is acknowledged for her guidance during the rheological measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Copper-zinc/chitosan complex hydrogels: Rheological, degradation and biological properties

  • Loncarevic, Andrea
  • Malbasa, Zoran
  • Kovacic, Marin
  • Ostojic, Karla
  • Angaits, Ange
  • Skoko, Zeljko
  • Szpunar, Joanna
  • Urlic, Inga
  • Rogina, Anamarija
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Polymer hydrogels crosslinked by therapeutic metal ions have attracted increased interest in recent years due to their unique and versatile properties. Chitosan hydrogels are widely investigated for various biomedical applications such as tissue engineering and drug delivery. Copper and zinc ions are considered as therapeutic metal ions, that have important roles in bone regeneration. The aim of this study was to investigate the physicochemical and biological properties of bimetallic-chitosan complex hydrogels with different cupric and zinc ions content. Scanning electron microscopy (SEM) revealed changes in the morphology from the microstructure with larger, tubular pores for aerogels with higher Zn content, to the sheets-like structure with long pores for samples with higher Cu content. FTIR analysis indicated the formation of bimetallic-chitosan aerogels. The obtained Xray diffraction patterns showed a broadening of chitosan's characteristic diffraction maximum, while characterization of physical properties showed decreased swelling ability and increased shear modulus with higher Cu content. ICP-MS results showed a negligible amount of copper and zinc ions released under physiological conditions during 24 h indicating a strong physical crosslink between metal ions and chitosan chains. Furthermore, accelerated in vitro degradation showed that hydrogels maintained good stability during four weeks of lysozyme activity. The MTT assay indicated that the cytotoxicity of Cu2+-Zn2+/chitosan complexes could be adjusted by the amount of cupric ions. All results imply that Cu2+ and Zn2+ ions act as physical crosslinkers of the polymer network. Also, results are in agreement with the prediction of density functional theory (DFT) which indicated stronger chitosan-Cu tetrahedral aqua complex interactions in comparison to the chitosan-[Zn(H2O)4]2+ interactions., This work was supported by the Croatian Science Foundation [grant number UIP-2020-02-6201]. A.L. acknowledges Biorender.com. Z.S. acknowledges CeNIKS project financed from the European Regional Development Fund, OP Competitiveness and Cohesion 2014-2020. G.G.F. acknowledges grant number PID2019-106000RB-C21 funded by MCIN/AEI/10.13039/501100011033. M.K. and A.R. acknowledge that the resources of the Isabella computer cluster based in the SRCE - University of Zagreb University Computing Centre were used for this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Ion Doping of Alginate-Based Surface Coatings Induces Adipogenesis of Stem Cells

  • Kindi, Husnia
  • Willems, Christian
  • Zhao, Mingyan
  • Menzel, Matthias
  • Schmelzer, Christian.E.H.
  • Herzberg, Martin
  • Fuhrmann, Bodo
  • Groth, Thomas
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Metal ions are important effectors of protein and cell functions. Here, polyelectrolyte multilayers (PEMs) made of chitosan (Chi) and alginate (Alg) were doped with different metal ions (Ca2+, Co2+, Cu2+, and Fe3+), which can form bonds with their functional groups. Ca2+ and Fe3+ ions can be deposited in PEM at higher quantities resulting in more positive zeta potentials and also higher water contact angles in the case of Fe3+. An interesting finding was that the exposure of PEM to metal ions decreases the elastic modulus of PEM. Fourier transformed infrared (FTIR) spectroscopy of multilayers provides evidence of interaction of metal ions with the carboxylic groups of Alg but not for hydroxyl and amino groups. The observed changes in wetting and surface potential are partly related to the increased adhesion and proliferation of multipotent C3H10T1/2 fibroblasts in contrast to plain nonadhesive [Chi/Alg] multilayers. Specifically, PEMs doped with Cu2+ and Fe3+ ions greatly promote cell attachment and adipogenic differentiation, which indicates that changes in not only surface properties but also the bioactivity of metal ions play an important role. In conclusion, metal ion-doped multilayer coatings made of alginate and chitosan can promote the differentiation of multipotent cells on implants without the use of other morphogens like growth factors., This work was partly funded by the International Graduate School AGRIPOLY supported by the European Regional Development Fund (ERDF) and the Federal State Saxony-Anhalt and a grant to H.K. from Martin Luther University Halle-Wittenberg for female PhD students. This work was further supported by the Fraunhofer Internal Programs without Grant Attract 069608203 (CEHS) . G.G.F. acknowledges funding by the State Research Agency of the Ministry of Science and Innovation of Spain, PID2019-106000RB-C21/AEI/10.13039/501100011033 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Research Progress in Enzymatically Cross-Linked Hydrogels as Injectable Systems for Bioprinting and Tissue Engineering

  • Naranjo-Alcázar, Raquel
  • Bendix, Sophie
  • Groth, Thomas
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Hydrogels have been developed for different biomedical applications such as in vitro culture platforms, drug delivery, bioprinting and tissue engineering. Enzymatic cross-linking has many advantages for its ability to form gels in situ while being injected into tissue, which facilitates minimally invasive surgery and adaptation to the shape of the defect. It is a highly biocompatible form of cross-linking, which permits the harmless encapsulation of cytokines and cells in contrast to chemically or photochemically induced cross-linking processes. The enzymatic cross-linking of synthetic and biogenic polymers also opens up their application as bioinks for engineering tissue and tumor models. This review first provides a general overview of the different cross-linking mechanisms, followed by a detailed survey of the enzymatic cross-linking mechanism applied to both natural and synthetic hydrogels. A detailed analysis of their specifications for bioprinting and tissue engineering applications is also included., This work was supported by the Grant PID2019-106000RB-C21 funded by MCIN/AEI/10.13039/501100011033 and the CIBER-Consorcio Centro de Investigacion Biomedica en Red-(CB06/01/1026), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. Raquel Naranjo-Alcazar received government funding for her doctoral thesis (Grant Number PRE2020-094368).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of metal ions on the physical properties of multilayers from hyaluronan and chitosan, and the adhesion, growth and adipogenic differentiation of multipotent mouse fibroblasts

  • Kindi, Husnia
  • Menzel, Matthias
  • Heilmann, Andreas
  • Schmelzer, Christian E. H.
  • Herzberg, Martin
  • Fuhrmann, Bodo
  • Groth, Thomas
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Polyelectrolyte multilayers (PEMs) consisting of the polysaccharides hyaluronic acid (HA) as the polyanion and chitosan (Chi) as the polycation were prepared with layer-by-layer technique (LbL). The [Chi/HA](5) multilayers were exposed to solutions of metal ions (Ca2+, Co2+, Cu2+ and Fe3+). Binding of metal ions to [Chi/HA](5) multilayers by the formation of complexes with functional groups of polysaccharides modulates their physical properties and the bioactivity of PEMs with regard to the adhesion and function of multipotent murine C3H10T1/2 embryonic fibroblasts. Characterization of multilayer formation and surface properties using different analytical methods demonstrates changes in the wetting, surface potential and mechanical properties of multilayers depending on the concentration and type of metal ion. Most interestingly, it is observed that Fe3+ metal ions greatly promote adhesion and spreading of C3H10T1/2 cells on the low adhesive [Chi/HA](5) PEM system. The application of intermediate concentrations of Cu2+, Ca2+ and Co2+ as well as low concentrations of Fe3+ to PEMs also results in increased cell spreading. Moreover, it can be shown that complex formation of PEMs with Cu2+ and Fe3+ ions leads to increased metabolic activity in cells after 24 h and induces cell differentiation towards adipocytes in the absence of any additional adipogenic media supplements. Overall, complex formation of [Chi/HA](5) PEM with metal ions like Cu2+ and Fe3+ represents an interesting and cheap alternative to the use of growth factors for making cell-adhesive coatings and guiding stem cell differentiation on implants and scaffolds to regenerate connective-type of tissues., This work was part of the High-Performance Center Chemical and Biosystems Technology Halle/Leipzig, supported by the European Regional Development Fund (ERDF), and a grant to HK from the Martin Luther University Halle-Wittenberg for female PhD students. The work was further supported by the Fraunhofer Internal Programs under Grant No. Attract 069-608203 (CEHS). TG acknowledges the kind support by the Ministry of Science and Higher Education of the Russian Federation within the framework of state support for the creation and development of World-Class Research Centers ``Digital biodesign and personalized healthcare'' 075-15-2020926. GGF acknowledges funding by the State Research Agency. Ministry of Science and Innovation of Spain, grant PID2019106000RB-C21/AEI/10.13039/501100011033 project. We are grateful for the kind support by Christian Willems for the help in formatting and proof reading the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Osteogenic differentiation of human mesenchymal stem cells on substituted calcium phosphate/chitosan composite scaffold

  • Ressler, A.
  • Antunovic, Maja
  • Babic, Slaven
  • Urlic, Inga
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Ionic substitutions are a promising strategy to enhance the biological performance of calcium phosphates (CaP) and composite materials for bone tissue engineering applications. However, systematic studies have not been performed on multi-substituted organic/inorganic scaffolds. In this work, highly porous composite scaffolds based on CaPs substituted with Sr2+, Mg2+, Zn2+ and SeO3 2¿ ions, and chitosan have been prepared by freezegelation technique. The scaffolds have shown highly porous structure, with very well interconnected pores and homogeneously dispersed CaPs, and high stability during 28 days in the degradation medium. Osteogenic potential of human mesenchymal stem cells seeded on scaffolds has been determined by histological, immunohistochemical and RT-qPCR analysis of cultured cells in static and dynamic conditions. Results indicated that ionic substitutions have a beneficial effect on cells and tissues. The scaffolds with multi-substituted CaPs have shown increased expression of osteogenesis related markers and increased phosphate deposits, compared to the scaffolds with non-substituted CaPs., The financial supports of the European Regional Development Fund (grant KK.01.1.1.07.0014) , the PID2019-106000RB-C21/AEI/10.13039/501100011033 project from the Spanish Research Agency, and the L'Oreal-UNESCO "For Women in Science" Foundation are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Electroactive Environments for Mesenchymal Stem Cells Osteogenic Differentiation

  • Guillot Ferriols, María Teresa
[ES] El aumento de la esperanza de vida conlleva la aparición de problemas muscoloesqueléticos afectando a la calidad de vida de los pacientes. Las nuevas terapias regenerativas óseas se centran en el uso de las células madre mesenquimales, MSCs, encargadas de la regeneración del tejido in vivo. La inducción de un fenotipo osteogénico prediferenciado in vitro, previo a la implantación de las MSCs, resulta en una mejor capacidad de regeneración del tejido óseo. Habitualmente se han empleado medios de diferenciación osteogénica que contienen dexametasona. Estos métodos son poco eficientes, por lo que el uso de métodos físicos está adquiriendo relevancia. El hueso es un tejido con propiedades piezoeléctricas debido a las fibras de colágeno que forman parte de su matriz extracelular. Este estímulo ha sido relacionado con su capacidad de responder al estrés mecánico y autoregenerarse, donde juegan un papel importante las MSCs. Éstas se encuentran en un entorno electroactivo, y son precisamente estas señales físicas las que pueden influir en su proceso de diferenciación osteogénica pudiendo ser empleadas para su prediferenciación in vitro de forma efectiva. Para comprobar esta hipótesis, en la presente Tesis Doctoral se han diseñado soportes de cultivo piezoeléctricos en 2 y 3 dimensiones basados en el uso del polímero piezoeléctrico polifluoruro de vinilideno (PVDF) combinados con partículas magnetostrictivas de ferrita de cobalto (CFO). Esta combinación permite la estimulación de los soportes de cultivo aplicando un campo magnético con un biorreactor. Este campo magnético genera la deformación del componente magnetostrictivo, que es transmitida a la matriz polimérica, deformándola y generando un campo eléctrico. Ésta última es transmitida a las células cultivadas en estos soportes para estudiar su efecto sobre la diferenciación osteogénica. En el primer capítulo se desarrollaron y caracterizaron membranas electroactivas de PVDF fabricadas por el método de separación de fases inducida por no-solventes. Se empleó etanol como no-solvente, dando lugar a membranas homogéneas altamente porosas. Estas cristalizan en fase g. Se optimizó un recubrimiento basado en la técnica capa a capa (LbL), empleando recombinámeros similares a la elastina (ELRs) que contenían secuencias de adhesión celular RGD. Se estudió la respuesta celular inicial de las MSCs y se comparó con los mismos soportes recubiertos únicamente con fibronectina adsorbida. La presencia de los ELRs es necesaria para promover la adhesión inicial de las MSCs en este tipo de soportes. En el segundo capítulo se combinó el PVDF con CFO, usando agua como no-solvente. Las membranas eran no simétricas, con una superficie lisa, que fue empleada para cultivo celular, con una mayoría en fase b, la más electroactiva. Se recubrieron y caracterizaron las membranas mediante LbL con colágeno tipo I y heparina. Se estudió el comportamiento de las MSCs sobre el LbL, resultando esencial para la proliferación celular en el caso de las membranas PVDF-CFO. En el capítulo tres se desarrollaron films de PVDF y PVDF-CFO cristalizados en presencia del líquido iónico [Bmim][Cl]. La presencia de éste indujo la nucleación del PVDF en fase b. Las MSCs eran capaces de adherirse y proliferar. Se realizaron ensayos de estimulación piezoeléctrica empleando un biorreactor magnético. Las MSCs respondieron a la estimulación incrementado la longitud de sus adhesiones focales, así como reduciendo la vimentina en el citoplasma. Finalmente, se diseñaron soportes de cultivo piezoeléctricos en 3D. Para ello se desarrollaron microesferas de PVDF y PVDF-CFO mediante la técnica de electropulverizado. Las microesferas se encapsularon en hidrogeles de gelatina junto con las MSCs. Se estimularon y tras 7 días, se observó un incremento en la expresión del factor de transcripción RUNX2 en las muestras estimuladas demostrando que la estimulación piezoeléctrica es capaz de activar en mayor medida la diferenciación de las MSCs., [CA] L'augment de l'esperança de vida comporta l'aparició de problemes muscoloesquelètics afectant la qualitat de vida dels pacients. Les noves teràpies regeneratives òssies es centren en l'ús de les cèl·lules mare mesenquimals, MSCs, encarregades de la regeneració del teixit in vivo. La inducció d'un fenotip osteogènic prediferenciat in vitro, previ a la implantació de les MSCs, resulta en una millor capacitat de regeneració del teixit ossi. Habitualment s'han fet servir mitjans de diferenciació osteogènica que contenen dexametasona. Aquests mètodes són poc eficients, per la qual cosa l'ús de mètodes físics està adquirint rellevància. L'os és un teixit amb propietats piezoelèctriques a causa de les fibres de col·lagen que formen part de la seva matriu extracel·lular. Aquest estímul ha estat relacionat amb la capacitat de respondre a l'estrès mecànic i autoregenerar-se, on juguen un paper important les MSCs. Aquestes es troben en un entorn electroactiu, i són precisament aquests senyals físics els que poden influir en el seu procés de diferenciació osteogènica podent ser emprats per a la seva prediferenciació in vitro de manera efectiva. Per comprovar aquesta hipòtesi, a la present tesi doctoral s'han dissenyat suports de cultiu piezoelèctrics en 2 i 3 dimensions basats en l'ús del polímer piezoelèctric polifluorur de vinilidè (PVDF) combinats amb partícules magnetostrictives de ferrita de cobalt (CFO). Aquesta combinació permet l'estimulació dels suports de cultiu aplicant un camp magnètic amb un bioreactor. Aquest camp magnètic genera la deformació del component magnetostrictiu, que és transmesa a la matriu polimèrica, deformant-la i generant un camp elèctric. Aquesta última és transmesa a les cèl·lules cultivades en aquests suports per estudiar-ne l'efecte sobre la diferenciació osteogènica. En el primer capítol es van desenvolupar i caracteritzar membranes electroactives de PVDF fabricades pel mètode de separació de fases induïda per no solvents. Es va emprar etanol com a no-solvent, donant lloc a membranes homogènies altament poroses. Aquestes cristal·litzen en fase g. S'optimitzà un recobriment basat en la tècnica capa a capa (LbL), emprant recombinàmers similars a l'elastina (ELRs) que contenien seqüències d'adhesió cel·lular RGD. Es va estudiar la resposta cel·lular inicial de les MSCs i es va comparar amb els mateixos suports recoberts únicament amb fibronectina adsorbida. La presència dels ELR és necessària per promoure l'adhesió inicial de les MSCs en aquest tipus de suports. En el segon capítol es va combinar el PVDF amb CFO, usant aigua com a no-solvent. Les membranes eren no simètriques, amb una superfície llisa, que va ser emprada per a cultiu cel·lular, amb una majoria en fase b, la més electroactiva. Es van recobrir i caracteritzar les membranes mitjançant LbL amb col·lagen tipus I i heparina. Es va estudiar el comportament de les MSCs sobre el LbL, resultant essencial per a la proliferació cel·lular en el cas de les membranes PVDF-CFO. Al capítol tres es van desenvolupar films de PVDF i PVDF-CFO cristal·litzats en presència del líquid iònic [Bmim][Cl]. La seva presència va induir la nucleació del PVDF en fase b. Les MSCs eren capaces d'adherir-se i proliferar. Es van realitzar assajos d'estimulació piezoelèctrica emprant un bioreactor magnètic. Les MSCs van respondre a l'estimulació incrementant la longitud de les seves adhesions focals, així com reduint la vimentina al citoplasma. Finalment, es van dissenyar suports de cultiu piezoelèctrics en 3D. Per això es van desenvolupar microesferes de PVDF i PVDF-CFO mitjançant la tècnica d'electropolveritzat. Les microesferes es van encapsular en hidrogels de gelatina juntament amb les MSCs. Es van estimular i després de 7 dies, es va observar un increment en l'expressió del factor de transcripció RUNX2 a les mostres estimulades demostrant que l'estimulació piezoelèctrica és capaç d'activar més la diferenciació de les MSCs., [EN] Life expectancy increase entails the presence of musculoskeletal disorders producing a substantial impact on patient's quality of life. New bone regenerative therapies are focused on the use of mesenchymal stem cells (MSCs), the main effectors of bone regeneration in vivo. Over the years, it has been demonstrated that the induction of a pre-differentiated phenotype in vitro, before MSCs implantation, results in a better capacity for bone tissue regeneration. For this purpose, biochemical approaches based on the use of osteogenic differentiation medium containing dexamethasone have traditionally been used. These methods are not efficient, which has favoured the use of physical methods as an alternative. Bone is a piezoelectric tissue due to the collagen fibres that conform its extracellular matrix. This stimulus has been related to its ability to respond to mechanical stress and self-regenerate, a process in which MSCs play a key role. MSCs are subjected to an electroactive environment. It is hypothesised that these physical signals may influence their osteogenic differentiation process and be used to effectively pre-differentiate them in vitro. To test this hypothesis, along this Doctoral Thesis, piezoelectric cell culture supports have been designed in 2 and 3 dimensions based on the use of the piezoelectric polymer poly(vinylidene) fluoride (PVDF) combined with magnetostrictive cobalt ferrite oxide (CFO) nanoparticles. This combination allows the stimulation of culture supports by applying a magnetic field with a bioreactor. This magnetic field induces the deformation of the magnetostrictive component, which is transmitted to the polymeric matrix, generating a deformation and producing an electric field, which is transmitted to the MSCs to study its effect on their osteogenic differentiation. In the first chapter, electroactive PVDF membranes manufactured by the non-solvent induced phase separation technique were developed and characterised. Ethanol was used as a non-solvent, which gave rise to highly porous homogeneous membranes crystallised in the g phase. A coating protocol based on the layer-by-layer (LbL) technique, using elastin-like recombinamers (ELRs) containing RGD cell adhesion sequences, was optimised. MSCs' initial cellular response was studied and compared with the membranes coated with adsorbed fibronectin. The presence of the ELRs was necessary to promote MSCs' initial adhesion in this type of support. In the second chapter, PVDF was combined with CFO, using water as a non-solvent. The membranes were not symmetrical, with a smooth surface used for cell culture, with a majority in phase b, the most electroactive. Membranes were coated and characterised by LbL with type I collagen and heparin. The behaviour of MSCs on LbL was studied, essential for cell proliferation in the case of PVDF-CFO membranes. In chapter three, PVDF and PVDF-CFO films crystallised in the presence of the ionic liquid [Bmim][Cl] were developed. The presence of ionic liquid induced PVDF nucleation in the b phase. MSCs were able to adhere and proliferate. Piezoelectric stimulation tests were performed using a magnetic bioreactor. MSCs responded to stimulation by increasing the length of their focal adhesions and reducing vimentin in the cytoplasm. Finally, 3D piezoelectric culture supports were designed. For this, PVDF and PVDF-CFO microspheres were developed using the electrospray technique. The microspheres were encapsulated in gelatin hydrogels together with the MSCs. They were stimulated, and after 7 days, an increase in the expression of the transcription factor RUNX2 was observed in the stimulated samples, demonstrating that piezoelectric stimulation is capable of activating the differentiation of MSCs to a greater extent., La presente tesis doctoral no podría haberse realizado sin la financiación del Ministerio de Economía y Competitividad a través de la beca para formación de personal investigador BES-2017-080398 y a la Agencia Estatal de Investigación a través de los proyectos PID2019-106000RB-C21 / AEI / 10.13039/501100011033, PID2019-106099RB- C41 y –C43 / AEI / 10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effective elastin-like recombinamers coating on poly(vinylidene) fluoride membranes for mesenchymal stem cell culture

  • Guillot-Ferriols, María Teresa
  • del Barrio, Ana
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Rodríguez-Cabello, José Carlos
  • Santos, Mercedes
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Bone's inherent piezoelectricity is a key factor in regulating bone growth and mesenchymal stem cells (MSCs) fate towards the osteogenic lineage. The piezoelectric polymer poly(vinylidene) fluoride (PVDF) was thus used to manufacture electroactive membranes by means of non-solvent induced phase separation (NIPS), producing porous membranes with approximately 90% of gamma-phase for MSCs culture. The combination of the porous surface and PVDF hydrophobicity hinders cell adhesion and requires a coating to improve cell culture conditions. A layer-by-layer (LbL) method was used to deposit elastin-like recombinamers (ELRs) containing RGD sequences applying click cross-linking chemistry. ELRs potential was confirmed by comparing traditional fibronectin adsorption with ELRs LbL on PVDF electroactive membranes. Porcine bone marrow MSCs preferred ELRs-coated surfaces, which enhanced initial cell adhesion and improved proliferation after 7 days. These findings lead to new possibilities for regenerative therapies in the area of bone tissue engineering, offering the advantages of MSC commitment towards the osteogenic lineage by applying electro-mechanical stimulation on electroactive substrates., This work was supported by the Spanish State Research Agency (AEI) through Projects PID2019-106000RB-C21/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 (including FEDER funds). Maria Guillot-Ferriols received government funding for her doctoral thesis [grant number BES-2017-080398FPI]. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors are grateful for the funding from the Spanish Government (MAT2016-78903-R, RTI2018-096320-B-C22), Junta de Castilla y Leon (VA317P18), Interreg V Espana Portugal POCTEP (0624_2IQBIONEURO_6_E) and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y Leon. This work was also supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2020. The authors thank FCT and FEDER funds (COMPETE 2020) under projects PTDC/BTM-MAT/28237/2017, PTDC/EMD-EMD/28159/2017 and PTDC/FIS-MAC/28157/2017. Carlos M. Costa is grateful to the FCT [grant number FRH/BPD/112547/2015]. Financial support was also received from the Basque Government under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Primary human hepatocyte-laden scaffolds for the treatment of acute liver failure

  • Rodríguez-Fernández, Julio
  • Garcia-Legler, Emma
  • Villanueva-Badenas, Estela
  • Donato, M. Teresa
  • Salmerón Sánchez, Manuel
  • Tolosa, Laia
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Cell-based liver therapies based on retrieving and steadying failed metabolic function(s) for acute and chronic diseases could be a valuable substitute for liver transplants, even though they are limited by the low engraftment capability and reduced functional quality of primary human hepatocytes (PHH). In this paper we propose the use of gelatin-hyaluronic acid (Gel-HA) scaffolds seeded with PHH for the treatment of liver failure. We first optimized the composition using Gel-HA hydrogels, looking for the mechanical properties closer to the human liver and determining HepG2 cells functionality. Gel-HA scaffolds with interconnected porosity (pore size 102 ¿m) were prepared and used for PHH culture and evaluation of key hepatic functions. PHH cultured in Gel-HA scaffolds exhibited increased albumin and urea secretion and metabolic capacity (CYP and UGT activity levels) compared to standard monolayer cultures. The transplant of the scaffold containing PHH led to an improvement in liver function (transaminase levels, necrosis) and ameliorated damage in a mouse model of acetaminophen (APAP)-induced liver failure. The study provided a mechanistic understanding of APAP-induced liver injury and the impact of transplantation by analyzing cytokine production and oxidative stress induction to find suitable biomarkers of cell therapy effectiveness., This work has been supported by the Institute of Health Carlos III (Plan Estatal de I+D+i 2013-2016) and co-financed by the European Regional Development Fund "A way to achieve Europe" (FEDER) through grants PI18/00993, PI21/00223 and CP16/00097; by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 through the PID2019-106000RB-C21 and PID2019-106000RB-C22 Grants and by the Generalitat Valenciana (PROMETEO/2019/060) . L.T. was supported by ISCIII CP16/00097 and MV21/00044, E.V.B through grant FI22/00082 (ISCIII) . M.S-S was supported by an EPSRC Programme Grant (EP/P001114/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

  • Guillot-Ferriols, María Teresa
  • Tolosa, Laia
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regeneration therapy results. Piezoelectric stimulation may be an effective cue to promote MSCs pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive microspheres. Microspheres were produced by electrospray technique, favouring CFO incorporation, crystallisation in beta-phase (85%) and a crystallinity degree of around 55%. The absence of cytotoxicity of the 3D construct was confirmed 24 h after cell encapsulation. Cells were viable, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in the short or long term. Nevertheless, piezoelectric stimulation upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic differentiation pathway. These results open the door for optimising a stimulation protocol allowing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation., This research was funded by Spanish State Research Agency (AEI), G.G.F. acknowledges the support of the PID2019-106000RB-C21/AEI/10.13039/501100011033 project, J.L.G.R. and S.L.-M. acknowledge the support of the PID2019-106099RB-C41 and -C43/AEI/10.13039/501100011033 projects. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. M.G.-F. received government funding for her doctoral thesis, grant number BES-2017-080398. The authors thank FCT (Fundacao para a Ciencia e a Tecnologia) for financial support under the framework of Strategic Funding grant number UID/FIS/04650/2021, projects PTDC/FIS-MAC/28157/2017 and POCI-01-0145-FEDER-007688, and contract under the Stimulus of Scientific Employment, Individual Support 2020.04028 CEECIND (C.M.C.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrical stimulation: Effective cue to direct osteogenic differentiation of mesenchymal stem cells?

  • Guillot-Ferriols, María Teresa
  • Lanceros-Méndez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mesenchymal stem cells (MSCs) play a major role in bone tissue engineering (BTE) thanks to their capacity for osteogenic differentiation and being easily available. In vivo, MSCs are exposed to an electroactive microenvironment in the bone niche, which has piezoelectric properties. The correlation between the electrically active milieu and bone's ability to adapt to mechanical stress and self-regenerate has led to using electrical stimulation (ES) as physical cue to direct MSCs differentiation towards the osteogenic lineage in BTE. This review summarizes the different techniques to electrically stimulate MSCs to induce their osteoblastogenesis in vitro, including general electrical stimulation and substrate mediated stimulation by means of conductive or piezoelectric cell culture supports. Several aspects are covered, including stimulation parameters, treatment times and cell culture media to summarize the best conditions for inducing MSCs osteogenic commitment by electrical stimulation, from a critical point of view. Electrical stimulation activates different signaling pathways, including bone morphogenetic protein (BMP) Smad-dependent or independent, regulated by mitogen activated protein kinases (MAPK), extracellular signal-regulated kinases (ERK) and p38. The roles of voltage gate calcium channels (VGCC) and integrins are also highlighted according to their application technique and parameters, mainly converging in the expression of RUNX2, the master regulator of the osteogenic differentiation pathway. Despite the evident lack of homogeneity in the approaches used, the ever-increasing scientific evidence confirms ES potential as an osteoinductive cue, mimicking aspects of the in vivo microenvironment and moving one step forward to the translation of this approach into clinic., This work was supported by the Spanish State Research Agency (AEI) through Projects PID2019-106000RB-C21/AEI/10.13039/501100011 033, PID2019-106099RB-C41/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 (including FEDER funds). The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Maria Guillot-Ferriols received government funding for her doctoral thesis [Grant Number BES-2017-080398FPI]. Funding from the FCT Fundacao para a Ciencia e a Tecnologia (FCT) under the strategic funding UID/FIS/04650/2020 and from the Basque Government Industry Departments under the ELKARTEK program is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PCL-Coated Multi-Substituted Calcium Phosphate Bone Scaffolds with Enhanced Properties

  • Bauer, Leonard
  • Antunovic, Maja
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Ionic substitutions within the hydroxyapatite lattice are a widely used approach to mimic the chemical composition of the bone mineral. In this work, Sr-substituted and Mg- and Sr-co-substituted calcium phosphate (CaP) scaffolds, with various levels of strontium and magnesium substitution, were prepared using the hydrothermal method at 200 degrees C. Calcium carbonate skeletons of cuttlefish bone, ammonium dihydrogenphosphate (NH4H2PO4), strontium nitrate (Sr(NO3)(2)), and magnesium perchlorate (Mg(ClO4)(2)) were used as reagents. Materials were characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Whole powder pattern decomposition refinements of XRD data indicated that increased magnesium content in the Mg- and Sr-co-substituted scaffolds was related to an increased proportion of the whitlockite (WH) phase in the biphasic hydroxyapatite (HAp)/WH scaffolds. In addition, refinements indicate that Sr2+ ions have replaced Ca2+ sites in the WH phase. Furthermore, PCL-coated Mg-substituted and Sr- and Mg-co-substituted scaffolds, with the HAp:WH wt. ratio of 90:10 were prepared by vacuum impregnation. Results of compression tests showed a positive impact of the WH phase and PCL coating on the mechanical properties of scaffolds. Human mesenchymal stem cells (hMSCs) were cultured on composite scaffolds in an osteogenic medium for 21 days. Immunohistochemical staining showed that Mg-Sr-CaP/PCL scaffold exhibited higher expression of collagen type I than the Mg-CaP/PCL scaffold, indicating the positive effect of Sr2+ ions on the differentiation of hMSCs, in concordance with histology results. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) analysis confirmed an early stage of osteogenic differentiation., This research was funded by the Croatian Science Foundation (project IP-2014-09-3752) and the European Structural and Investments Funds (grant KK.01.1.1.07.0014.). The authors thank Inga Urli, Faculty of Science, University of Zagreb for providing Hek293 and hMSC cells. Compression experiments were carried out at the Centre for Biomaterials and Tissue Engineering (CBIT), Universitat Politecnica de Valencia, Valencia, Spain under the PID2019-106000RB-C21/AEI/10.13039/501100011033 project. The authors would like to thank Jorge Mas-Estelles for his generous assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Vitro Models for Studying Chronic Drug-Induced Liver Injury

  • Donato, M. Teresa
  • Tolosa, Laia
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Drug-induced liver injury (DILI) is a major clinical problem in terms of patient morbidity and mortality, cost to healthcare systems and failure of the development of new drugs. The need for consistent safety strategies capable of identifying a potential toxicity risk early in the drug discovery pipeline is key. Human DILI is poorly predicted in animals, probably due to the well-known interspecies differences in drug metabolism, pharmacokinetics, and toxicity targets. For this reason, distinct cellular models from primary human hepatocytes or hepatoma cell lines cultured as 2D monolayers to emerging 3D culture systems or the use of multi-cellular systems have been proposed for hepatotoxicity studies. In order to mimic long-term hepatotoxicity in vitro, cell models, which maintain hepatic phenotype for a suitably long period, should be used. On the other hand, repeated-dose administration is a more relevant scenario for therapeutics, providing information not only about toxicity, but also about cumulative effects and/or delayed responses. In this review, we evaluate the existing cell models for DILI prediction focusing on chronic hepatotoxicity, highlighting how better characterization and mechanistic studies could lead to advance DILI prediction., This work has been supported by the Institute of Health Carlos III (ISCIII, Plan Estatal de I+D+i 2013-2016) and co-financed by the European Regional Development Fund "A way to achieve Europe" (FEDER) through grant PI21/00223, by the Spanish Ministry of Science and Innovation Ministry-Spanish Research Agency through the Project PID2019-106000RB-C22/AEI/10.13039/501100011033, and by the Generalitat Valenciana (PROMETEO/2019/060).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Mechanical Control of Alginate-Fibronectin Hydrogels with Dual Crosslinking: Covalent and Ionic

  • Trujillo-Muñoz, Sara
  • Seow, Melanie
  • Lueckgen, Aline
  • Salmerón Sánchez, Manuel
  • Cipitria, Amaia
[EN] Alginate is a polysaccharide used extensively in biomedical applications due to its biocompatibility and suitability for hydrogel fabrication using mild reaction chemistries. Though alginate has commonly been crosslinked using divalent cations, covalent crosslinking chemistries have also been developed. Hydrogels with tuneable mechanical properties are required for many biomedical applications to mimic the stiffness of different tissues. Here, we present a strategy to engineer alginate hydrogels with tuneable mechanical properties by covalent crosslinking of a norbornene-modified alginate using ultraviolet (UV)-initiated thiol-ene chemistry. We also demonstrate that the system can be functionalised with cues such as full-length fibronectin and protease-degradable sequences. Finally, we take advantage of alginate's ability to be crosslinked covalently and ionically to design dual crosslinked constructs enabling dynamic control of mechanical properties, with gels that undergo cycles of stiffening-softening by adding and quenching calcium cations. Overall, we present a versatile hydrogel with tuneable and dynamic mechanical properties, and incorporate cell-interactive features such as cell-mediated protease-induced degradability and full-length proteins, which may find applications in a variety of biomedical contexts., This researchwas funded by Deutsche Forschungsgemeinschaft (DFG) grant CI 203/1-2, DFG Emmy Noether grant (CI 203/2-1) and the Berlin-Brandenburg School for Regenerative Therapies (BSRT) Extension grant. This work was also supported by an EPSRC Program Grant (EP/P001114/1) and from the UK Regenerative Medicine Platform "Acellular/Smart Materials-3D Architecture" (MR/R015651/1). This research was also supported by the Spanish State Research Agency (AEI) through the PID2019-106000RB-C21/AEI/10.13039/501100011033 project (including the FEDER funds). The article processing charge was funded by the Max Planck Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fine-Tuning Regulation of Surface Mobility by Acrylate Copolymers and Its Effect on Cell Adhesion and Differentiation

  • Morata-Martínez, Miranda
  • Sprott, Mark R.
  • Antolinos-Turpín, Carmen M.
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Fibronectin (FN) mediates cell-material interactions during events such as tissue repair, and therefore the biomimetic modeling of this protein in vitro benefits regeneration. The nature of the interface is crucial in determining cell adhesion, morphology, and differentiation. Poly(ethyl acrylate) (PEA) spontaneously organizes FN into biological nanonetworks, resulting in exceptional bone regeneration in animal models. Spontaneous network organization of FN is also observed in poly(buthyl acrylate) (PBA) substrates that have higher surface mobility than PEA. C2C12 myoblasts differentiate efficiently on PEA and PBA substrates. In this study, we investigate if intermediate surface mobilities between PEA and PBA induce cell differentiation more efficiently than PEA. A family of P(EA-co-BA) copolymers were synthesized in the entire range of compositions to finely tune surface mobility between PEA and PBA. Surface characterization demonstrates that FN mobility steadily increased with the PBA content. All compositions allowed the biological organization of FN with similar exposure of cell binding domains. C2C12 myoblasts adhered well in all the materials, with higher focal adhesions in PEA and PBA. The increase of the interfacial mobility had an impact in cell adhesion by increasing the number of FAs per cell. In addition, cell differentiation decreased proportionally with surface mobility, from PEA to PBA., This work was supported by an EPSRC Programme Grant (EP/P001114/1), the Grant (PID2019-106000RB-C21) funded by MCIN/AEI/10.13039/501100011033 and the CIBER (Consorcio Centro de Investigacion Biomedica en Red) (CB06/01/1026) ,Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

  • Guillot Ferriols, María Teresa
  • Tolosa Pardo, Laia
  • Costa, Carlos Miguel
  • Lanceros-Mendez, Senentxu
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regen-eration therapy results. Piezoelectric stimulation may be an effective cue to promote MSC pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive mi-crospheres. Microspheres were produced by electrospray technique, favouring CFO incorpora-tion, crystallisation in -phase (85 %) and a crystallinity degree of around 55 %. The absence of cytotoxicity of the 3D construct was confirmed 24 hours after cell encapsulation. Cells were via-ble, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in short or long term. Nevertheless, piezoelectric stimula-tion upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic dif-ferentiation pathway. These results open the door for optimising a stimulation protocol allow-ing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation.