Pasar al contenido principal

BIOMATERIALES PIEZOELECTRICOS PARA LA DIFERENCIACION CELULAR EN INTERFASES CELULA-MATERIAL ELECTRICAMENTE ACTIVAS.

MAT2016-76039-C4-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamics of hydration water in gelatin and hyaluronic acid hydrogels

  • Kripotou, Sotiria
  • Zafeiris, Konstantinos
  • Culebras-Martinez, Maria
  • Kyritsis, Apostolos
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] We employed broadband dielectric spectroscopy (BDS), for the investigation of the water dynamics in partially hydrated hyaluronic acid (HA), and gelatin (Gel), enzymatically crosslinked hydrogels, in the water fraction ranges [Formula: see text]. Our results indicate that at low hydrations ([Formula: see text]), where the dielectric response of the hydrogels is identical during cooling and heating, water plasticizes strongly the polymeric matrix and is organized in clusters giving rise to [Formula: see text]-process, secondary water relaxation and to an additional slower relaxation process. This later process has been found to be related with the dc charge conductivity and can be described in terms of the conduction current relaxation mechanism. At slightly higher hydrations, however, always below the hydration level where ice is formed during cooling, we have recorded in HA hydrogel a strong water dielectric relaxation process, [Formula: see text], which has Arrhenius-like temperature dependence and large time scale resembling relaxation processes recorded in bulk low density amorphous solid water structures. This relaxation process shows a strong-to-fragile transition at [Formula: see text]C and our data suggest that the VTF-like process recorded at [Formula: see text]C is controlled by the same molecular process like long range charge transport. In addition, our data imply that the crossover temperature is related with the onset of structural rearrangements (increase in configurational entropy) of the macromolecules. In partially crystallized hydrogels ([Formula: see text]) HA exhibits at low temperatures the ice dielectric process consistent with the bulk hexagonal ice, whereas Gel hydrogel exhibits as main low temperature process a slow relaxation process that refers to open tetrahedral structures of water similar to low density amorphous ice structures and to bulk cubic ice. Regarding the water secondary relaxation processes, we have shown that the [Formula: see text]-process and the [Formula: see text] process are activated in water hydrogen bond networks with different structures., The support from Ministerio de Economia, Industria y Competitividad (MINECO) through the MAT2016-76039-C4-1-R project (including the FEDER funds) is acknowledged. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We thank Dr. P. Klonos for his assistance in preparing scheme 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature and ph responsive behaviour of antifouling zwitterionic mesoporous silica nanoparticles.

  • Beltran-Osuna, Angela A.
  • Perilla, Jairo E.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Zwitterionic brush grafting is considered a serious strategy for surface modification on mesoporous silica nanoparticles (MSN) and a prominent alternative to polyethylene glycol films for antifouling applications. In this study, the solution behavior of poly(sulfobetaine methacrylate) (pSBMA) polymer brushes grafted on MSN (95 +/- 15nm particle diameter, 2.8nm pore size) was evaluated. The layers increased their hydrodynamic diameter (d(H)) with increasing temperature, indicating a conformational change from a surface-collapsed state to a fully solvated brush. This development was marked by a transition temperature, related to the molecular weight and the theoretical length of the polymer chains. Variation of d(H) with pH values was studied and a zwitterionic range of 5-9 was established where the electric charges in the molecule were balanced. Zeta potential (ZP) values for all pSBMA-MSN products were also measured. A decreasing trend of ZP with pH and an isoelectric point around 5.5-6.5 was obtained for all dispersions. Furthermore, the influence of temperature was analyzed on ZP and a directly proportional correlation was found, with increasing rates of 0.50-0.87%/degrees C. Finally, ZP variation with electrolyte concentration was determined and a range of 40-60mM of NaCl concentration was established to reach an almost zero-charge point for all nanoparticles. It was demonstrated that the solution response of pSBMA-MSN can be modulated by temperature, pH, and ionic concentration of the media. These behaviors could be used as controlled release mechanisms for the application of pSBMA-MSN as carriers in biomedicine and nanophamaceutical fields in the future. Published under license by AIP Publishing., Jose L. Gomez Ribelles acknowledges support of the Ministerio de Economia y Competitividad, MINECO (Research No. MAT2016-76039-C4-1-R). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was also supported by Ministerio de Ciencia, Tecnologia e Innovacion (MINCIENCIAS), Convocatoria 567 Doctorados Nacionales, and Universidad Nacional de Colombia (Grant No. DIB 201010021438). The authors acknowledge the effort of Ramon Martinez Manez, Scientific Director of the Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), and Head of the Interuniversity Research Institute for Molecular Recognition and Technological Development (IDM) at Universitat Politecnica de Valencia, where all measurements were performed
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human Mesenchymal Stem Cells Growth and Osteogenic Differentiation on Piezoelectric Poly(vinylidene fluoride) Microsphere Substrates

  • Sobreiro-Almeida, Rita
  • Tamaño-Machiavello, María Noel
  • Carvalho, E.O.
  • Cordon, Lourdes
  • Doria, S.
  • Senent, Leonor
  • Correia, D. M.
  • Ribeiro, C.
  • Lanceros-Méndez, S.
  • Sempere-Talens, Amparo
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this work was to determine the influence of the biomaterial environment on human mesenchymal stem cell (hMSC) fate when cultured in supports with varying topography. Poly(vinylidene fluoride) (PVDF) culture supports were prepared with structures ranging between 2D and 3D, based on PVDF films on which PVDF microspheres were deposited with varying surface density. Maintenance of multipotentiality when cultured in expansion medium was studied by flow cytometry monitoring the expression of characteristic hMSCs markers, and revealed that cells were losing their characteristic surface markers on these supports. Cell morphology was assessed by scanning electron microscopy (SEM). Alkaline phosphatase activity was also assessed after seven days of culture on expansion medium. On the other hand, osteoblastic differentiation was monitored while culturing in osteogenic medium after cells reached confluence. Osteocalcin immunocytochemistry and alizarin red assays were performed. We show that flow cytometry is a suitable technique for the study of the differentiation of hMSC seeded onto biomaterials, giving a quantitative reliable analysis of hMSC-associated markers. We also show that electrosprayed piezoelectric poly(vinylidene fluoride) is a suitable support for tissue engineering purposes, as hMSCs can proliferate, be viable and undergo osteogenic differentiation when chemically stimulated., The authors thank the Portuguese Foundation for Science and Technology (FCT) for financial support under project PTDC/EEI-SII/5582/2014, Strategic Funding UID/FIS/04650/2013 and grants SFRH/BPD/90870/2012 (C.R.) and SFRH/BPD/121526/2016 (D.M.C). The authors acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) and from the Basque Government Industry Department under the ELKARTEK program. JLGR, LC, RSS and AS acknowledge funding by the Conselleria de Educacion, Investigacion, Cultura y Deporte of the Generalitat Valenciana through PROMETEO/2016/063 project. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. This work was partially financed with FEDER funds (CIBERONC (CB16/12/00284)). The authors acknowledge the assistance and advice of Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Production and enzymatic degradation of poly (epsilon-caprolactone)/graphene oxide composites

  • Martínez-Ramón, V.
  • Castilla Cortázar, María Isabel Cecilia
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
[EN] Poly(epsilon-caprolactone) (PCL) based composites containing different graphene oxide (GO) contents (0.1, 0.2 and 0.5 wt%) were produced by the solution mixing method followed by compression molding and enzymatically degraded in a pH 7.4 phosphate buffer solution containing Pseudomonas lipase at 37 degrees C. Morphological changes, molecular weight, calorimetric and mechanical properties were analyzed according to graphene oxide content. The study of tensile properties showed that the composites increased their Young's modulus, while tensile strength and elongation at break decreased to significantly less than that of neat PCL. PCL composite crystallinity was evaluated by differential scanning calorimetry (DSC). It was found that incorporating GO can reduce nucleation activity as well as crystallization rates, from 67.6% for neat PCL to 50.6% for a composite with 0.5 wt% GO content. For enzymatic degradation, the weight loss data showed that incorporating GO into the PCL significantly altered enzymatic degradation. The presence of GO did not alter PCL's hydrolysis mechanism, but did slow down composite enzymatic degradation in proportion to the percentage of filler content., I. Castilla-Cortazar and A. J. Campillo-Fernandez are grateful for the support of the Spanish Ministry of Science, Innovation and Universities, through RTE2018-095872-13-C22/ERDF. A. Vidaurre would like to express her gratitude for the support of the Spanish Ministry of Science and Education, through the MAT2016-76039-C4-1-R Project, and also the support from CIBER-BBN, an initiative funded by the Sixth National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions financed by the Institute de Salud Carlos III with assistance from the European Regional Development Fund. The FESEM, TEM and mechanical tests were conducted by the authors at the Microscopy Service of the Universitat Politecnica de Valencia, whose advice is greatly appreciated,
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maintenance of chondrocyte phenotype during expansion on PLLA microtopographies

  • Costa Martínez, Elisa
  • González García, Cristina
  • Salmerón Sánchez, Manuel
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Articular chondrocytes are difficult to grow, as they lose their characteristic phenotype following expansion on standard tissue culture plates. Here, we show that culturing them on surfaces of poly(L-lactic acid) of well-defined microtopography allows expansion and maintenance of characteristic chondrogenic markers. We investigated the dynamics of human chondrocyte dedifferentiation on the different poly(L-lactic acid) microtopographies by the expression of collagen type I, collagen type II and aggrecan at different culture times. When seeded on poly(L-lactic acid), chondrocytes maintained their characteristic hyaline phenotype up to 7days, which allowed to expand the initial cell population approximately six times without cell dedifferentiation. Maintenance of cell phenotype was afterwards correlated to cell adhesion on the different substrates. Chondrocytes adhesion occurs via the (51) integrin on poly(L-lactic acid), suggesting cell-fibronectin interactions. However, (21) integrin is mainly expressed on the control substrate after 1day of culture, and the characteristic chondrocytic markers are lost (collagen type II expression is overcome by the synthesis of collagen type I). Expanding chondrocytes on poly(L-lactic acid) might be an effective solution to prevent dedifferentiation and improving the number of cells needed for autologous chondrocyte transplantation., The support received from the European Research Council (ERC 306990) and the UK EPSRC (EP/P001114/1) is acknowledged. J.L.G.R. acknowledges support of the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1 (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Programme, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Cation and Anion Type on the Formation of the Electroactive beta-Phase and Thermal and Dynamic Mechanical Properties of Poly(vinylidene fluoride)/Ionic Liquids Blends

  • Correia, D.M.
  • Costa, C.M.
  • Lizundia, E.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Films based on poly(vinylidene fluoride) (PVDF) blended with ionic liquids (ILs) comprising different cations and anions were developed to investigate the IL influence on the resulting PVDF crystalline phase. Blends with 25 wt % IL content were produced by solvent casting followed by solvent evaporation at 210 degrees C in an air oven. Five different ILs containing the same cation 1-ethyl-3-methylimidazolium [Emim] and five ILs containing the same anion bis(trifluoromethylsulfonyl)imide [TFSI] were selected. The formation of the different phases and the resulting thermal and dynamic mechanical properties were studied by Fourier transform infrared spectroscopy, differential scanning calorimetry, and dynamic mechanical analysis. The incorporation of [Emim]-based ILs successfully directs the PVDF crystallization from the nonpolar alpha-phase toward the electroactive and highly polar beta-phase. On the contrary, blends containing [TFSI] as a common anion yield a mixture of alpha and beta phases. Overall, the induced beta-phase ranges between 14 and 95% depending on the incorporated IL type. Interestingly, 1-ethyl-3-methylimidazolium chloride [Emim] [Cl] is the most effective IL among the studied ones to significantly enhance the beta-phase content, showing also a marked nucleating effect. The results suggest that ions favorably interact with PVDF chains and are located occupying the amorphous interlamellar PVDF regions. Furthermore, the studied ILs act as plasticizers, yielding lower glass-transition temperatures of the amorphous phase and decreasing mechanical storage modulus at room temperature., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/BTM-MAT/28237/2017, PTDC/EEI-SII/5582/2014, and PTDC/FIS-MAC/28157/2017. D.M.C. and C.M.C. also acknowledge the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, respectively. The financial supports from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-(1 and 3)-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK, and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

The effect of electric fields on hyaline cartilage: an in vitro and in silico study

  • Vaca González, Juan Jairo
[ES] El cartílago hialino es un tejido conectivo denso con poca capacidad de auto regeneración cuando es afectado por patologías degenerativas. Por lo tanto, la estimulación eléctrica se ha propuesto como una terapia alternativa no invasiva para mejorar la reparación del cartílago hialino. De acuerdo con esto, este trabajo presenta un enfoque computacional y experimental combinado para entender mejor la biología del cartílago hialino y su respuesta a la estimulación eléctrica usando diferentes modelos in vitro. En primer lugar, se ha desarrollado un modelo mecanobiológico para simular el proceso de osificación endocondral. Por otro lado, se ha evaluado el efecto de la estimulación eléctrica sobre el cartílago hialino en tres escenarios diferentes. Inicialmente se ha analizado la proliferación celular y la síntesis de glicosaminoglicanos de condrocitos cultivados en monocapa y estimulados con campos eléctricos. Luego, se ha realizado un análisis histomorfométrico a explantes de condroepífisis que fueron estimulados eléctricamente. Por último, se ha evaluado el efecto de los campos eléctricos sobre la diferenciación condrogénica de células madre mesenquimales cultivadas en hidrogeles. Los resultados indican que la estimulación eléctrica es un estímulo biofísico prometedor, ya que este tipo de estimulación mejora la viabilidad y la proliferación celular, induce cambios morfológicos en los condrocitos, y estimula la síntesis de las principales moléculas que componen el cartílago hialino, tales como SOX-9, glicosaminoglicanos y agrecan. Además, este proyecto es el primer paso hacia la implementación de un estímulo biofísico alternativo que modifica la dinámica celular de los condrocitos de la placa de crecimiento en condiciones ex vivo. Adicionalmente, este estudio resalta el efecto potencial de los campos eléctricos para inducir el proceso de condrogénesis de células madre mesenquimales cultivadas en condiciones basales. En general, la evaluación de la estimulación eléctrica sobre condrocitos, tejidos y andamios es una herramienta útil que puede contribuir al conocimiento actual de las terapias regenerativas enfocadas en la regeneración del cartílago hialino., [CA] El cartílag hialí és un teixit connectiu dens amb poca capacitat d'auto regeneració quan es veu afectat per patologies degeneratives. Per tant, l'estimulació elèctrica s'ha proposat com una teràpia alternativa no invasiva per millorar la reparació del cartílag articular. D'acord amb això, aquest treball presenta un enfoc computacional i experimental combinat per entendre millor la biologia del cartílag hialí i la seva resposta a l'estimulació elèctrica usant diferents models in vitro. En primer lloc, s'ha desenvolupat un model mecanobiològic per simular el procés d'ossificació endocondral. D'altra banda, s'ha avaluat l'efecte de l'estimulació elèctrica sobre el cartílag hialí en tres escenaris diferents. Inicialment s'ha analitzat la proliferació cel·lular i la síntesi de glicosaminoglicans de condròcits cultivats en monocapa i estimulats amb camps elèctrics. Després, s'ha realitzat una anàlisi histomorfomètrica a explants de condroepífisis que van ser estimulats elèctricament. Finalment, s'ha avaluat l'efecte dels camps elèctrics sobre la diferenciació condrogénica de cèl·lules mare mesenquimals cultivades en hidrogels. Els resultats indiquen que l'estimulació elèctrica és un estímul biofîsic prometedor, ja que aquest tipus d'estimulació millora la viabilitat i la proliferació cel·lular, indueix canvis morfològics en els condròcits, i estimula la síntesi de les principals molècules que componen el cartílag hialí, com ara SOX-9, glicosaminoglicans i agrecan. A més, aquest projecte és el primer pas cap a la implementació d'un estímul biofísic alternatiu que modifica la dinàmica cel·lular dels condròcits de la placa de creixement en condicions ex vivo. Addicionalment, aquest estudi ressalta l'efecte potencial dels camps elèctrics per induir el procés de condrogènesi de cèl·lules mare mesenquimals cultivades en condicions basals. En general, l'avaluació de l'estimulació elèctrica sobre condròcits, teixits i scaffolds és una eina útil que pot contribuir al coneixement actual de les teràpies regeneratives enfocades a la regeneració del cartílag hialí., [EN] Hyaline cartilage is a dense connective tissue with low self-healing capacity when is affected by degenerative pathologies. Therefore, electrical stimulation has been proposed as a possible non-invasive alternative therapy to enhance the restoration of the cartilaginous tissue. Accordingly, this work presents a combined computational and experimental approach to understand better the hyaline cartilage biology and its response to electrical stimulation using different in vitro models. On the one hand, a mechanobiological model was developed to simulate the endochondral ossification process. On the other hand, the electrical stimulation on hyaline cartilage was evaluated in three different scenarios. Initially, cell proliferation and glycosaminoglycans synthesis of chondrocytes, cultured in monolayer and stimulated with electric fields, was analyzed. Then, a histomorphometric analysis was performed to chondroepiphysis explants that were electrically stimulated. Finally, the effects of the electric fields on chondrogenic differentiation of mesenchymal stem cells cultured in hydrogels was assessed. The results indicated that electrical stimulation is a promising biophysical stimulus, due to the fact that this type of stimulation enhances the viability and the proliferation of cells, induces morphological changes in the chondrocytes, and stimulates the synthesis of the main molecules that compose the hyaline cartilage, such as SOX-9, glycosaminoglycans and aggrecan. Moreover, this project is the first step towards the implementation of an alternative biophysical stimulus that modifies the cellular dynamics of growth plate chondrocytes in ex vivo conditions. Additionally, this study highlights the potential effect of electric fields to induce the chondrogenesis process of mesenchymal stem cells cultured in basal conditions. Overall, the assessment of electrical stimulation on chondrocytes, tissues and scaffolds is a useful tool that may contribute to the current knowledge of regenerative therapies focused on hyaline cartilage healing., To the financial support from COLCIENCIAS – COLFUTURO through the fellowship No. 647 for national doctorates. To the financial support from COLCIENCIAS through the research grant 712-2015 No. 50457. To the financial support from the Spanish Ministry of Economy and Competitiveness through the MAT2016-76039-C4-1-R project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and characterization of microspheres for a 3D mesenchymal stem cell culture

  • Lastra, María Laura
  • Cortizo, Ana María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Recent studies have shown the relevance of growing mesenchymal stem cells (MSCs) in three-dimensional environments with respect to the monolayer cell culture on an adherent substrate. In this sense, macroporous scaffolds and hydrogels have been used as three-dimensional (3D) supports. In this work, we explored the culture of MSCs in a 3D environment created by microspheres, prepared with a fumarate-vinyl acetate copolymer and chitosan. In this system, the environment that the cells feel has similarities to that found by the cells encapsulated in a hydrogel, but the cells have the ability to reorganize their environment since the microspheres are mobile. We evaluated their biocompatibility in vitro using RAW 264.7 macrophages and bone marrow mesenchymal stem cells (BMSCs). The results with RAW 264.7 cells showed good cell viability, without evident signs of cytotoxicity. BMSCs not only proliferate, but also rearrange to grow in clusters, thus highlighting the advantages of microspheres as 3D environments., This work supported by Universidad Nacional de La Plata (11/X 768 and subsidio Jovenes Investigadores 2017), Comision de Investigaciones Cientificas de la Provincia de Buenos Aires. In addition, financial support from the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project PID2019-106099RB-C41/AEI/10.13039/501100011033 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. MLL is a Posdoctoral Fellow of CONICET, AMC is a member of Carrera del Investigador Cientifico de la CICPBA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A cell-free approach with a supporting biomaterial in the form of dispersed microspheres induces hyaline cartilage formation in a rabbit knee model

  • Zurriaga Carda, Javier
  • Lastra, Maria L.
  • Antolinos-Turpin, Carmen M.
  • Morales-Román, Rosa M.
  • Sancho-Tello, María
  • Perea-Ruiz, Sofía
  • Milián, Lara
  • Fernández, Juan M.
  • Cortizo, Ana M.
  • Carda, Carmen
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The objective of this study was to test a regenerative medicine strategy for the regeneration of articular cartilage. This approach combines microfracture of the subchondral bone with the implant at the site of the cartilage defect of a supporting biomaterial in the form of microspheres aimed at creating an adequate biomechanical environment for the differentiation of the mesenchymal stem cells that migrate from the bone marrow. The possible inflammatory response to these biomaterials was previously studied by means of the culture of RAW264.7 macrophages. The microspheres were implanted in a 3¿mm-diameter defect in the trochlea of the femoral condyle of New Zealand rabbits, covering them with a poly(l-lactic acid) (PLLA) membrane manufactured by electrospinning. Experimental groups included a group where exclusively PLLA microspheres were implanted, another group where a mixture of 50/50 microspheres of PLLA (hydrophobic and rigid) and others of chitosan (a hydrogel) were used, and a third group used as a control where no material was used and only the membrane was covering the defect. The histological characteristics of the regenerated tissue have been evaluated 3 months after the operation. We found that during the regeneration process the microspheres, and the membrane covering them, are displaced by the neoformed tissue in the regeneration space toward the subchondral bone region, leaving room for the formation of a tissue with the characteristics of hyaline cartilage., Comisión de Investigaciones Científicas de la Provincia de Buenos Aires (CICPBA), Universidad Nacional de La Plata, Grant/Award Number: 11/X643; Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional de la Unión Europea, Grant/Award Number: MAT2016-76039-C4-1 2-R; Spanish Ministry of Economy and Competitiveness (MINECO)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifouling zwitterionic pSBMA-MSN particles for biomedical applications

  • Beltrán-Osuna, A.A.
  • Perilla-Perilla, Jairo Ernesto
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Mesoporous silica nanoparticles (MSNs) are one of the most promising nanocarriers in biomedicine. Nonetheless, surface modification has been pointed out as a condition necessary for drug delivery applications, where stability and biocompatibility are extremely important for the vehicle performance. Likewise, zwitterionic polymers are outstanding candidates in biological fields, where poly(sulfobetaine methacrylate) (pSBMA) has been widely studied. These polymers, known as antifouling materials, are able to render a surface capacity to avoid protein adhesion. In this work, a core-shell nanocarrier was created, where pSBMA was covalently grafted by atom transfer radical polymerization (ATRP) onto a previously functionalized MSN surface. Brush morphologies with different chain lengths (M over bar n, between 6500 and 32 300) and graft densities (sigma(pSBMA), between 0.15 and 0.51 molecules of pSBMA per nm(2) of MSN) were obtained. Protein adhesion resistance was evaluated with two proteins: fibronectin (FN) and bovine serum albumin (BSA). The best nanocarrier synthesized allowed a reduction of 96% of FN and 76% of BSA adhesion (compared with an adsorption of 100% assigned to the native material). Since the influence of the brush morphology is seldom studied or reported, this work aims to comprehend how the configuration of the polymer brushes affected their antifouling capacity, in order to use this pSBMA-MSN product for biomedical applications, notably as a possible drug delivery nanocarrier. Future work will analyze the solution behavior of the zwitterionic brushes to evaluate variations of temperature and pH values as possible mechanisms of delivery., José L. Gómez Ribelles acknowledges the support of the Ministerio de Economía y Competitividad, MINECO (research number MAT2016-76039-C4-1-R). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was also supported by COLCIENCIAS (Departamento Administrativo de Ciencia Tecnología e Innovación, Convocatoria 567 Doctorados Nacionales) and Universidad Nacional de Colombia (grant number DIB 201010021438). The authors acknowledge the assistance from the Microscopy Service at the Universitat Politècnica de València where all micrographs were taken.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Water dynamics and thermal properties of tyramine-modified hyaluronic acid - Gelatin hydrogels

  • Kripotou, Sotiria
  • Stefanopoulou, Evdokia
  • Culebras-Martínez, Maria
  • Morales-Román, Rosa María
  • Kyritsis, A.
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] A new family of injectable hydrogels, enzymatically crosslinked from mixtures of tyramine conjugates of hyaluronic acid (HA) and gelatin (Gel) are characterized in terms of their molecular morphology, miscibility and water sorption ability by employing Field Emission Scanning Electron Microscopy, water sorption/desorption measurements and differential scanning calorimetry technique. The hydrogels were chemically crosslinked by reaction of the phenol groups of the tyramine in the presence of the enzyme horseradish peroxidase and a small amount of hydrogen peroxide. The water fraction in the microporous hydrogels, h(w), was up to 0.68 being achieved by equilibration in environment of saturated water vapor. Our measurements reveal good miscibility between HA and Gel components in the whole hydration range studied and that the HA/Gel mixtures exhibit glass transition characteristics, water diffusion dynamics and equilibrium water contents that are independent of the composition. The intermolecular interactions have been found to be dependent on the hydration level and the mixtures behave like the Gel component for h(w) < 0.20 and like the HA for higher hydration levels. On the other hand, the appearance of gel-sol like transition in all mixtures, like in neat Gel component, points to nanoscale heterogeneities in the hydrogels and the existence of Gel-rich nanodomains. Calorimetric measurements on hydrogels at high hydration levels (h(w) > 0.40) show that they become partially crystallized at subzero temperatures and reveal that absorbed water molecules form, at least, two discrete forms of ice crystals. In the phase separated hydrogels, next to ice phase, a second phase of polymer/water homogeneous mixture with constant water fraction about 0.25 has been identified., The Spanish Ministry support through the MAT2016-76039-C4-1-R project (including the FEDER funds) is acknowledged. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We thank Dr. P. Klonos for his assistance in preparing Scheme 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chitosan patterning on titanium implants

  • Gilabert-Chirivella, Eduardo
  • Ribeiro, Clarisse
  • Ribeiro, Sylvie
  • Correia, Daniela M.
  • González-Martín, Maria Luisa
  • Manero, Jose Maria
  • Lanceros-Mendez, S.
  • Pérez Feito, Ricardo|||0000-0002-8428-9395
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Titanium and its alloys are widely used in medical implants because of their excellent properties. However, bacterial infection is a frequent cause of titanium-based implant failure and also compromises its osseointegration. In this study, we report a new simple method of providing titanium surfaces with antibacterial properties by alternating antibacterial chitosan domains with titanium domains in the micrometric scale. Surface micro grooves were etched on pure titanium disks at intervals of 60 pm using a modified 3D printer and were then coated with chitosan antibacterial polysaccharide. The dimensions of the patterned microgrooves made it possible to fix the chitosan domains to the titanium substrate without the need for covalent bonding. These domains were stable after 5 days of immersion in water and reduced the surface contact angle. Preliminary cell adhesion assays demonstrated that MC3T3-E1 pre-osteoblasts preferentially adhered to the titanium regions, while C2C12 myoblasts were uniformly distributed over the whole surface., The authors are grateful for the financial support from the Spanish Ministry of Economy and Competitiveness through the MAT2016-76039-C4-1-R Project (including Feder funds). CIBER-BBN is an initiative funded by the VI National R & D & I Plan 2008-2011, "IniciativaIngenio 2010", Consolider Program. GIBER actions are financed by the "Institute de Salud Carlos III" with assistance from the European Regional Development Fund. CR, SR and DMC are grateful to the FCT, POPH/FSE for the SFRH/BPD/90870/2012, SFRH/BD/111478/2015 and SFRH/BD/82411/2011 grants, respectively. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the UPV. We are also indebted to Dionisio Garcia Garcia and Jose Garcia Anton of the "Institute de Seguridad Industrial Radiofisica y Medio Ambiental" of the UPV for their assistance with the scanning confocal laser microscopy
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of synergistic effect between roughness and surface chemistry on cell adhesion of a multilayer Si- Hydroxyapatite coating on Ti6Al4V obtained by magnetron sputtering

  • Pérez Zapata, K.
  • Lenis, J.A.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Ti alloys are widely used in the biomedical field because they have an adequate balance between mechanical properties, corrosion resistance and biocompatibility. However, when this material is incorporated in the human body, unfavorable reactions can be obtained which do not allow a good osseointegration due to the formation of a fibrous and non-adherent layer between the biomaterial and the bone, which can lead to failure or rejection of the implant. In this study, the influence of surface modification of Ti6Al4V alloy with a hydroxyapatite (HA) and silicon (Si) coating on its biological response in vitro was evaluated. The deposition process was performed by sputtering on two Ti6Al4V surfaces with different root mean square roughness values, the first one with 3.8 nm and the second one with 48.7 nm. The surface morphology of the coatings was observed by Scanning Electron Microscopy and Atomic Force Microscopy, the chemical composition was evaluated by X-ray Energy Dispersive Spectrometry and micro-Raman Spectroscopy. The in vitro biological response of the coatings was evaluated by cell metabolic activity assay and cell adhesion tests, using mouse mesenchymal stem cells. The control of the process parameters allowed obtaining a multilayer HA-Si coating with good compositional balance (Ca/P ratio very close to 1.67 and characteristic vibrations of the HA phase). Roughness values of 27 +/- 5 nm and 52 +/- 6 nm were obtained for the multilayer coatings obtained on Ti6Al4V (smooth surface) and Ti6Al4V (rough surface), respectively. Biological assays indicated a potentially non-toxic character of the coatings, moreover, the cell adhesion of Ti6Al4V was favored both by the incorporation of the HA-Si multilayer coating and by the increase in the roughness of the substrate., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIEN-CIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia), JLGR acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R and MAT 2015-63974-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-096794), and Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study of some fundamental physicochemical variables on the morphology of mesoporous silica nanoparticles MCM-41 type

  • Beltrán-Osuna, A.A.
  • Perilla-Perilla, Jairo Ernesto
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] All variables affecting the morphology of mesoporous silica nanoparticles (MSN) should be carefully analyzed in order to truly tailored design their mesoporous structure according to their final use. Although complete control on MCM-41 synthesis has been already claimed, reproducibility and repeatability of results remain a big issue due to the lack of information reported in literature. Stirring rate, reaction volume, and system configuration (i.e., opened or closed reactor) are three variables that are usually omitted, making the comparison of product characteristics difficult. Specifically, the rate of solvent evaporation is seldom disclosed, and its influence has not been previously analyzed. These variables were systematically studied in this work, and they were proven to have a fundamental impact on final particle morphology. Hence, a high degree of circularity (C = 0.97) and monodispersed particle size distributions were only achieved when a stirring speed of 500 rpm and a reaction scale of 500 mL were used in a partially opened system, for a 2 h reaction at 80 degrees C. Well-shaped spherical mesoporous silica nanoparticles with a diameter of 95 nm, a pore size of 2.8 nm, and a total surface area of 954 m(2) g(-1) were obtained. Final characteristics made this product suitable to be used in biomedicine and nanopharmaceutics, especially for the design of drug delivery systems., This study was funded partially by Departamento Administrativo de Ciencia Tecnología e Innovación–COLCIENCIAS (recipient, Angela A. Beltrán-Osuna); Ministerio de Economía y Competitividad, MINECO, research number MAT2016-76039-C4-1-R (Recipient, José L. Gómez-Ribelles); and Universidad Nacional de Colombia, grant number DIB201010021438 (Recipient, Jairo E. Perilla).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new waterborne chitosan-based polyurethane hydrogel as a vehicle to transplant bone marrow mesenchymal cells improved wound healing of ulcers in a diabetic rat model

  • Viezzer, Christian
  • Mazzuca, Rafael
  • Machado, Denise Cantarelli
  • Forte, María Magdalena de Camargo
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Foot ulcers, a common complication of diabetes, can cause physical incapacity and are derived from several factors, including poor wound healing. New therapeutic strategies are needed to minimize this complication for the sake of patients' health. We therefore developed a new chitosan- polyurethane hydrogel membrane (HPUC) and the WA results confirmed that HPUC present low cytotoxicity and improved wound healing when used with mononuclear bone marrow fraction cells in the diabetic rat model. The biodegradable hydrogels were produced in block copolymer networks with a combination of chitosan blocks and biodegradable polyurethane. The membranes were characterized by FTIR, C-13-NMR and thermogravimetry. Swelling and hydrolytic degradation were also evaluated. The non-solubility of the membranes in good solvents and the chemical characterization confirmed that the network structure was formed between the PU and the chitosan through urea/urethane bonds. The findings confirm that the HPUC have interesting properties that make them suitable for wound healing applications., This work was funded by: Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior -doctoral fellowships to Viezzer, C (CAPES/PDSE-BEX: 1408/11-9) and the Spanish Ministry of Economy and Competitiveness (MINECO) through the MAT2016-76039-C4-1-R Project, including FEDER financial support. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of highly swellable hydrogels of water-soluble carboxymethyl chitosan and poly(ethylene glycol)

  • Gámiz González, Mª Amparo
  • Edlund, Ulrica
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Highly swellable hydrogels were produced by crosslinking of high molecular weight carboxymethylated chitosan (CmCHT) with poly(ethylene glycol) (PEG) oligomers. The hydrogel swelling capacity could be controlled via the crosslinking density and ranged from 900% to 5600%. The hydrogels showed good homogeneity with a high interconnected porosity in the swollen state and with nanodomains rich in CmCHT and others rich in PEG diglycidyl ether. Oscillatory frequency sweep analysis showed a storage modulus of 27kPa for the hydrogel with the highest crosslinking density, which together with the exhibited enzyme degradability with lysozyme at 59days indicate that these hydrogels have potential use in delivery systems or soft tissue regeneration., The authors acknowledge the support of the Ministerio de Economia y Competitividad, MINECO, through the MAT2016-76039-C4-1-R project. Maria Amparo Gamiz Gonzalez acknowledges a BES-2011-044740 grant. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(epsilon-caprolactone)/Graphene oxide composite systems: a comparative study on hydrolytic degradation at extreme pH values

  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
  • Vidaurre, Ana|||0000-0003-3394-1176
  • González-Reed, Pablo
  • Castilla Cortázar, María Isabel Cecilia
[EN] Polycaprolactone/Graphene oxide (PCL/GO) composites are shown to be promising substrates for tissue engineering as their degradation behavior is a key aspect in this type of application. The present paper studies the effect of different GO contents (0.1, 0.2 and 0.5 wt%) of PCL/GO composites on accelerated hydrolytic degradation at pH 13 and pH 1. Degradation kinetics at pH 13 is strongly affected by GO content, and speed up at higher percentages. The composite with 0.5 wt% of GO was completely degraded in 72 hours, while degradation at pH 1 presents a different profile and seems to have an induction period that lasts more than 1500 hours. Morphological changes, molecular weight distribution, weight loss, degree of swelling and calorimetric properties were obtained as a function of degradation time. According to the results obtained, the addition of small percentages of GO significantly influences the degradation behavior of the composites acting as degradation modulators., Isabel Castilla-Cortazar and Alberto J. Campillo-Fernandez are grateful for the support of the Spanish Ministry of Science, Innovation and Universities, through RTI2018-095872-B-C22/ERDE Ana Vidaurre would like to express her gratitude for the support of the Spanish Ministry of Science and Education, through the MAT2016-76039-C4-1-R Project, and also the support from CIBER-BBN, an initiative funded by the Sixth National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CII3ER Actions financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular relaxation and ionic conductivity of ionic liquids confined in a poly(vinylidene fluoride) polymer matrix: Influence of anion and cation type

  • Correia, D.M.
  • Costa, C.M.
  • de Zea Bermudez, V.
  • Esperança, J.M.S.S.
  • Reis, P.M.
  • Andrio Balado, A.
  • Lanceros-Méndez, S.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Blends of poly(vinylidene fluoride) (PVDF) and ionic liquids (ILs) with different cations and anions have been prepared by solvent casting. The IL content was the same in all blends of the series. Molecular relaxation and ionic conductivity have been systematically studied by broadband dielectric relaxation spectroscopy (BDS) in wide frequency (0.1 Hz-1 MHz) and temperature ranges (-120 to 150 degrees C) and the results have been analysed in terms of dielectric modulus M*(omega) and conductivity sigma*(omega) formalisms. The main relaxation process (beta-relaxation) of the amorphous phase of the blend that integrates amorphous polymer chain segments and IL molecules was observed. Significant differences in the Vogel-Fulcher-Tammann (VFT) fitting parameters in the PVDF/IL blends with different anions were detected. The conductivity sigma*(omega) formalism shows that it is strongly dependent on the miscibility of the IL with the amorphous PVDF chains and the type of anion. The Barton-Namikawa-Nakajima (BNN) relation sigma(0) similar to omega(c) is fulfilled for all PVDF/IL blends except for that containing 1-ethyl-3-methylimidazolium hydrogen sulfate, [Emim][HSO4]. The activation energy of the ac conductivity, calculated according to the Dyre model, decreases for all PVDF/IL blends with respect to neat PVDF. The structure of the cation of the IL has been found to exert less influence on the dielectric and conductivity properties of the blends., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2013 and the Associated Laboratory Research Unit for Green Chemistry, Technologies and Clean Processes, LAQV (financed by national funds from FCT/MEC, UID/QUI/50006/2013 and ERDF under the PT2020, POCI-01-0145-FEDER-007265). The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/CTM-ENE/5387/2014, PTDC/EEI-SII/5582/2014 and PTDC/FIS-MAC/28157/2017. D.M.C., C.M.C., J.M.S center dot S.E. and P.M.R. also thank to the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, and Investigator FCT contracts IF/00355/2012 and IF/0621/2015, respectively. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-(1 and 3)-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effective elastin-like recombinamers coating on poly(vinylidene) fluoride membranes for mesenchymal stem cell culture

  • Guillot-Ferriols, María Teresa
  • del Barrio, Ana
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Rodríguez-Cabello, José Carlos
  • Santos, Mercedes
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Bone's inherent piezoelectricity is a key factor in regulating bone growth and mesenchymal stem cells (MSCs) fate towards the osteogenic lineage. The piezoelectric polymer poly(vinylidene) fluoride (PVDF) was thus used to manufacture electroactive membranes by means of non-solvent induced phase separation (NIPS), producing porous membranes with approximately 90% of gamma-phase for MSCs culture. The combination of the porous surface and PVDF hydrophobicity hinders cell adhesion and requires a coating to improve cell culture conditions. A layer-by-layer (LbL) method was used to deposit elastin-like recombinamers (ELRs) containing RGD sequences applying click cross-linking chemistry. ELRs potential was confirmed by comparing traditional fibronectin adsorption with ELRs LbL on PVDF electroactive membranes. Porcine bone marrow MSCs preferred ELRs-coated surfaces, which enhanced initial cell adhesion and improved proliferation after 7 days. These findings lead to new possibilities for regenerative therapies in the area of bone tissue engineering, offering the advantages of MSC commitment towards the osteogenic lineage by applying electro-mechanical stimulation on electroactive substrates., This work was supported by the Spanish State Research Agency (AEI) through Projects PID2019-106000RB-C21/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 (including FEDER funds). Maria Guillot-Ferriols received government funding for her doctoral thesis [grant number BES-2017-080398FPI]. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors are grateful for the funding from the Spanish Government (MAT2016-78903-R, RTI2018-096320-B-C22), Junta de Castilla y Leon (VA317P18), Interreg V Espana Portugal POCTEP (0624_2IQBIONEURO_6_E) and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y Leon. This work was also supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2020. The authors thank FCT and FEDER funds (COMPETE 2020) under projects PTDC/BTM-MAT/28237/2017, PTDC/EMD-EMD/28159/2017 and PTDC/FIS-MAC/28157/2017. Carlos M. Costa is grateful to the FCT [grant number FRH/BPD/112547/2015]. Financial support was also received from the Basque Government under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Injectable chitosan-hydroxyapatite hydrogels promote the osteogenic differentiation of mesenchymal stem cells

  • Ressler, Antonia
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Rogina, Anamarija
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Injectable hydrogels have emerged as promising biomaterials for tissue engineering applications. The goal of this study was to evaluate the potential of a pH-responsive chitosan-hydroxyapatite hydrogel to be used as a three-dimensional support for encapsulated mesenchymal stem cells (MSCs) osteogenic differentiation. In vitro enzymatic degradation of the hydrogel, during 28 days of incubation, in simulated physiological condiditons, was characterized by swelling measurements, molecular weight determination and SEM analysis of hydrogel microstructure. Osteogenic differentiation of encapsulated MSCs was confirmed by osteogenic Runx2, collagen type I and osteocalcin immunostaining and alkaline phosphatase quantification. The deposition of late osteogenic markers (calcium phosphates) detected by Alizarin red and von Kossa staining indicated an extracellular matrix mineralization., This work has been supported in part by the Croatian Science Foundation under the project IP-2014-09-3752 by the Spanish Ministry through the MAT2016-76039-C4-1-R project (including the FEDER financial support). Joaquin Rodenas-Rochina acknowledges funding by the Conselleria de Educacion, Investigacion, Cultura y Deporte (Generalitat Valenciana) and co-funding by Fondo Social Europeo (FSE) through APOSTD grant (APOSTD/2016/006).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cellular hydrogels based on pH-responsive chitosan-hydroxyapatite system

  • Rogina, Anamarija
  • Ressler, Antonia
  • Matie, Igor
  • Marijanovic, Inga
  • Ivankovic, Marica
  • Ivankovic, Hrvoje
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] The development of bioactive injectable system as cell carrier with minimal impact on viability of encapsulated cells represents a great challenge. In the present work, we propose a new pH-responsive chitosan-hydroxyapatite-based hydrogel with sodium bicarbonate (NaHCO3) as the gelling agent. The in situ synthesis of hydroxyapatite phase has resulted in stable composite suspension and final homogeneous hydrogel. The application of sodium bicarbonate has allowed non-cytotoxic fast gelation of chitosan-hydroxyapatite within 4min, and without excess of sodium ions concentration. Rheological properties of crosslinked hydrogel have demonstrated possible behaviour as 'strong physical hydro gel'. The live dead staining has confirmed good viability and dispersion, as well as proliferation of encapsulated cells by the culture time. Presented preliminary results show good potential of chitosanhydroxyapatite/NaHCO3 as a cell carrier, whose impact on the cell differentiation need to be confirmed by encapsulation of other cell phenotypes., This work has been supported in part by the Croatian Science Foundation under the project IP-2014-09-3752. The authors want to thank Carlos Garcia Fernandez from TA Instruments for helping with rheological measurements. G. Gallego Ferrer is grateful for the financial support of the Spanish Ministry of Economy and Competitiveness through the MAT2016-76039-C4-1-R project (including Feder funds)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Kinetic study of thermal degradation of chitosan as a function of deacetylation degree

  • Gamiz-Gonzalez, Mª Amparo
  • Correia, D.M.
  • Lanceros-Mendez, S.
  • Sencadas, V.
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Vidaurre, Ana|||0000-0003-3394-1176
[EN] Thermal degradation of chitosan with varying deacetylation degree (DD) ranging between 50 and 85% was analyzed by dynamic thermogravimetric analysis at different heating rates. The present study focused on the temperature range between 500 and 800 K, above water evaporation. Thermal degradation showed a main degradation stage in this temperature interval with a second stage that appeared in the weight derivative curves as a shoulder in the high temperature side of the main peak with increasing intensity as the DD decreased. The Kissinger and isoconversional Ozawa-Flynn-Wall models were employed to evaluate the Ea of both thermal degradation processes. Different kinetic models were tested to computer simulate the thermogravimetric traces calculating the model parameters with a non-linear least squares fitting routine. The Sestack-Berggren model allowed reproducing accurately the overlapping of the two degradation mechanisms and calculating the mass fraction lost in each of them revealing the coupling between the two degradation mechanisms., Thermal degradation of chitosan with varying deacetylation degree (DD) ranging between 50 and 85% was analyzed by dynamic thermogravimetric analysis at different heating rates. The present study focused on the temperature range between 500 and 800 K, above water evaporation. Thermal degradation showed a main degradation stage in this temperature interval with a second stage that appeared in the weight derivative curves as a shoulder in the high temperature side of the main peak with increasing intensity as the DD decreased. The Kissinger and isoconversional Ozawa-Flynn-Wall models were employed to evaluate the Ea of both thermal degradation processes. Different kinetic models were tested to computer simulate the thermogravimetric traces calculating the model parameters with a non-linear least squares fitting routine. The Sestack-Berggren model allowed reproducing accurately the overlapping of the two degradation mechanisms and calculating the mass fraction lost in each of them revealing the coupling between the two degradation mechanisms.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Emulsion based microencapsulation of proteins in poly(L-lactic acid) films and membranes for the controlled release of drugs

  • Delmote, Josephine
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] The aim of this study was to develop micro- or macro-porous substrates of poly(L-lactic acid) (PLLA) for the sustained release of water-soluble proteins. A model protein, bovine serum albumin (BSA), was incorporated into the hydrophobous PLLA matrix by emulsifying an aqueous BSA solution into an organic PLEA solution. The work focused on the effect of the fabrication procedure on substrates' microstructure and protein delivery kinetics. The films were prepared by solvent casting or freeze-extraction, after which the protein release profiles from both matrices were compared. A homogeneous distribution of BSA in the PLLA-films and membranes was obtained. In vitro release of the protein from the freeze extraction membranes was more significant than the release from the solvent cast films. BSA was found to be released from the freeze-extraction membranes in two stages: an initial fast release followed by a sustained release. The release from the solvent cast films was more moderated and accompanied by the polymer degradation., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2016-76039-C4-1-R Project (including Feder funds). CIBER-BBN is an initiative funded by the VI National R&D&I plan 2008-2011, "Iniciativa Ingenio 2010", Consolider Program. CIBER actions are financed by the "Instituto de Salud Carlos III" with assistance from the European Regional Development Fund. The authors' thanks are also due to the "Servicio de Microscopic Electronica" of the "Universitat Politecnica de Valencia" for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of electrical stimulation on chondrogenic differentiation of mesenchymal stem cells cultured in hyaluronic acid - Gelatin injectable hydrogels

  • Vaca-González, Juan Jairo
  • Guillot-Ferriols, María Teresa
  • Garzón-Alvarado, Diego Alexander
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Electrical stimulation (ES) has provided enhanced chondrogenesis of mesenchymal stem cells (MSCs) cultured in micro-mass without the addition of exogenous growth factors. In this study, we demonstrate for the first time that ES of MSCs encapsulated in an injectable hyaluronic acid (HA) - gelatin (GEL) mixture enhances the chondrogenic potential of the hydrogel. Samples were stimulated for 21 days with 10 mV/cm at 60 kHz, applied for 30 min every 6 h a day. Mechanical properties of hydrogels were higher if the precursors were dissolved in Calcium-Free Krebs Ringer Buffer (G' = 1141 +/- 23 Pa) compared to those diluted in culture media (G' = 213 +/- 19 Pa). Cells within stimulated hydrogels were rounder (55%) than non-stimulated cultures (32%) (p = 0.005). Chondrogenic markers such as SOX-9 and aggrecan were higher in stimulated hydrogels compared to controls. The ES demonstrated that normalized content of glycosaminoglycans and collagen to DNA was slightly higher in stimulated samples. Additionally, collagen type II normalized to total collagen was 2.43 times higher in stimulated hydrogels. These findings make ES a promising tool for enhancing articular cartilage tissue engineering outcomes by combining hydrogels and MSCs., The financial support received from COLCIENCIAS through Fellowship No. 647 and Grant 712-2015 No. 50457 is acknowledged, as is that from the Spain Ministry of Economy and Competitiveness through the MAT2016-76039-C4-1-R project (including the Feder Funds).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Protein-Glycosaminoglycan Hydrogels Promote Chondrogenic Stem Cell Differentiation

  • Moulisova, Vladimira
  • Poveda-Reyes, Sara
  • Sanmartin-Masia, Esther
  • Quintanilla-Sierra, Luis
  • Salmerón Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Gelatin-hyaluronic acid (Gel-HA) hybrid hydrogels have been proposed as matrices for tissue engineering because of their ability to mimic the architecture of the extracellular matrix. Our aim was to explore whether tyramine conjugates of Gel and HA, producing injectable hydrogels, are able to induce a particular phenotype of encapsulated human mesenchymal stem cells without the need for growth factors. While pure Gel allowed good cell adhesion without remarkable differentiation and pure HA triggered chondrogenic differentiation without cell spreading, the hybrids, especially those rich in HA, promoted chondrogenic differentiation as well as cell proliferation and adhesion. Secretion of chondrogenic markers such as aggrecan, SOX-9, collagen type II, and glycosaminoglycans was observed, whereas osteogenic, myogenic, and adipogenic markers (RUNX2, sarcomeric myosin, and lipoproteinlipase, respectively) were not present after 2 weeks in the growth medium. The most promising matrix for chondrogenesis seems to be a mixture containing 70% HA and 30% Gel as it is the material with the best mechanical properties from all compositions tested here, and at the same time, it provides an environment suitable for balanced cell adhesion and chondrogenic differentiation. Thus, it represents a system that has a high potential to be used as the injectable material for cartilage regeneration therapies., The authors are grateful for the financial support received from the Spanish Ministry through the MAT2016-76039-C4-1-R project (including the FEDER financial support), the BES-2011-046144, and the EEBB-I-14-08725 grants. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. M.S.-S. acknowledges the European Research Council (ERC-HealInSynergy 306990) and the UK Engineering and Physical Sciences Research Council (EPSRC-EP/P001114/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure, morphology, adhesion and in vitro biological evaluation of antibacterial multi-layer HA-Ag/SiO2/TiN/Ti coatings obtained by RF magnetron sputtering for biomedical applications

  • Lenis, J. A.
  • Pacha-Olivenza, M. A.
  • González-Martín, M. L.
  • Bolívar, F. J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Biocompatible and antibacterial multi-layer coatings of hydroxyapatite (HA)-Ag/SiO2/TiN/Ti were obtained on the Ti-6Al-4V alloy, by means of the magnetron sputtering technique. During characterization of the coatings, the chemical composition was evaluated by energy dispersive X-ray spectroscopy and the phase analysis was carried out by X-ray diffraction. The morphology of the coatings was observed by field emission scanning electron microscopy, while transmission electron microscopy was used to appreciate their structure. The adhesion of the coatings to the substrate was evaluated by micro scratch test. The in vitro biological response was evaluated in terms of cytotoxicity, adhesion and differentiation of mouse mesenchymal stem cells, as well as adhesion and bacterial viability of Staphylococcus aureus strain. Through the compositional study carried out, the deposition of the HA phase was verified, with a Ca/P ratio close to 1.67 and the characteristic diffraction peaks of this compound. The structural study of the coatings evidenced the obtention of multi-layer architectures. The use of an intermediate SiO2/TiN/Ti trilayer was found to improve adhesion between HA-Ag and the substrate by 84%. Finally, the in vitro biological tests carried out indicated a potentially non-toxic character in the coatings. Additionally, an antibacterial effect was registered at low concentrations of Ag (< 0.25 mg/L)., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia), JLGR acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R and MAT 2015-63974-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-096794), and Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund, M-ERA.NET PCIN-2016-146 and RTI2018-096862-B-I00, Spanish "Junta de Extremadura" for the projects IB16117, TE-0016-18 and GR18153.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Freeze-extraction microporous electroactive supports for cell culture

  • Morales-Román, Rosa María
  • Guillot-Ferriols, María Teresa
  • Roig-Pérez, L.
  • Lanceros-Méndez, S.
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Poly(vinylidene fluoride) (PVDF) is a semicrystalline polymer with four crystalline phases, of which the all trans conformation (beta-phase) is the one with the largest piezoelectric response and best electroactive properties. This smart material is able to reproduce physiological events such as inherent bone piezoelectricity, making it a perfect candidate to drive the osteogenic differentiation of mesenchymal stem cells (MSCs) towards the osteogenic lineage. The influence of topography on the adhesion, proliferation and maintenance of multipotency of this type of cell is well established and has confirmed that the production of variable porosity substrates is a suitable approach for cell therapy. In this work, novel PVDF microporous membranes in the beta-phase were developed by the freeze-extraction technique. Several concentrations of PVDF in N,N-dimethylformamide (10, 15 and 20% w/v) were used to obtain membranes with different grades of porosity in the range of 80-84%. The cell culture supports thus produced were found to possess good crystallinity (66%), beta-phase presence (94%) and a microstructure based on spherulite agglomerations with a diameter of spherulite in the order of 1 mu m that is higher as the polymer concentration increases. The membranes have good mechanical properties and the storage modulus, with values between 5 and 47 MPa, rises with the polymer content of the starting solution. Porcine bone marrow mesenchymal stem cells (pBM-MSCs) were used to study cell adhesion and proliferation. Regarding cell adhesion at 24 h, the cells preferred the more porous structures and had round focal adhesions with well-developed cytoskeletons, while they had a round morphology on the less porous membranes. The cells preferred the less porous membranes to proliferate, even though the initial morphology at 24 h showed poor adhesion. These findings confirm that the controlled microporosity of beta-phase PVDF membranes can be produced by freeze extraction and offer the possibility of modifying the adhesion and proliferation of pBM-MSCs on these substrates., This work was supported by the Spanish Government through Projects MAT2016-76039-C4-1-R and MAT2016-76039-C4-3-R (including FEDER funds). Maria Guillot-Ferriols acknowledges the government funding of her doctoral thesis through a BES-2017-080398FPI Grant. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun PVA/Bentonite Nanocomposites Mats for Drug Delivery

  • Ferrández-Rives, M.
  • Beltrán-Osuna, A.A.
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Electrospun mats and films of polyvinyl alcohol (PVA) hydrogel are produced for drug delivery. To provide mechanical consistency to the gel a reinforcement by nanoclays is introduced in the polymer matrix. Four different suspensions of nanoparticles in the polymer solution are prepared in an adequate solvent. These suspensions are subjected to an electrospinning process to produce the nanofiber mat, while films are produced by casting. The influence of the process parameters over the nanofibers microstructure is analyzed by scanning electron microscopy (SEM). The effectiveness of nanoclay encapsulation in the nanocomposites is tested by a thermogravimetric analysis. A crosslinking reaction in solution is carried out to prevent the dissolution of the nanocomposites in aqueous media. A model protein (bovine serum albumin, BSA) is absorbed in the nanocomposites to characterize the release kinetics in phosphate-buffered saline (PBS)., The authors gratefully acknowledge the technical assistance of Yesenia Gonzalez in sample preparation and sorption experiments, Professor Ramon Martinez Manez and his research group from the Laboratory of Nanomedicine, at the Institute of Applied Molecular Chemistry (IQMA) for their support in the DLS measurements and the assistance and advice of Electron Microscopy Service of the UPV. This work was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R (including the FEDER financial support) CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bone-Mimicking Injectable Gelatine/Hydroxyapatite Hydrogels

  • Rogina, A.
  • Sandrk, N
  • Antunovic, M.
  • Ivankovic, M.
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Bioactive synthetic hydrogels have emerged as promising materials because they can provide molecularly tailored biofunctions and adjustable mechanical properties. To mimic the mineralogical and organic components of the natural bone, hydroxyapatite and a tyramine conjugate of gelatine were combined in this study. The effect of various amounts of in situ synthesized hydroxyapatite in gelatine-tyramine on the morphology and physical properties of injectable hydrogels was investigated. Mineralogical identification confirmed successful precipitation of in situ formed hydrox yapatite. Better distribution of hydroxyapatite crystal agglomerates within modified gelatine was found at 5 % of hydroxyapatite, which could be responsible for increased storage modulus with respect to pure gelatine hydrogel. Prepared composite hydrogels are non-toxic and support the proliferation of Hek293 cells., The authors are grateful for the financial support of the Spanish Ministry of Economy and Competitiveness through the MAT2016-76039-C4-1-R project (including Feder funds) and the Croatian Science Foundation under the project IP-2014-09-3752.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of oxygen levels on chondrogenesis of porcine mesenchymal stem cells cultured in polycaprolactone scaffolds

  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Kelly, Daniel John
  • Lebourg, Myriam Madeleine
[EN] Chondrogenesis of mesenchymal stem cells (MSCs) is known to be regulated by a number of environmental factors, including local oxygen levels. The hypothesis of this study is that the response of MSCs to hypoxia is dependent on the physical and chemical characteristics of the substrate used. The objective of this study was to explore how different modifications to polycaprolactone (PCL) scaffolds influenced the response of MSCs to hypoxia. PCL, PCL-hyaluronic acid (HA), and PCL-Bioglass (R) (BG) scaffolds were seeded with MSCs derived from bone marrow and cultured for 35 days under normoxic or low oxygen conditions, and the resulting biochemical properties of the MSC laden construct were assessed. Low oxygen tension has a positive effect over cell proliferation and macromolecules biosynthesis. Furthermore, hypoxia enhanced the distribution of collagen and glycosaminoglycans (GAGs) deposition through the scaffold. On the other hand, MSCs displayed certain material dependent responses to hypoxia. Low oxygen tension had a positive effect on cell proliferation in BG and HA scaffolds, but only a positive effect on GAGs synthesis in PCL and HA scaffolds. In conclusion, hypoxia increased cell viability and expression of chondrogenic markers but the cell response was modulated by the type of scaffold used., Contract grant sponsors: VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, Instituto de Salud Carlos III, and European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable chitosan-poly(epsilon-caprolactone) dialdehyde copolymer networks for soft tissue engineering

  • Gámiz González, Mª Amparo
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Chitosan/PCL block-copolymer networks were synthesized using different amounts of aldehyde end capped polycaprolactone as crosslinking agent. The crosslinking reaction was performed by dissolving both components in the common solvent hexafluoroisopropanol (HFIP). The formation of the network was confirmed by solubility tests in good solvents of both components. The resulting composition was determined by thermogravimetric analysis. The hydrophilic/hydrophobic networks behave as hydrogels; water sorption at pH7 is around 70% that of pure chitosan for a network containing 36% PCL blocks. The PCL domains were not able to crystallize, except for the CHT-64 sample as shown by DSC and X-ray diffraction. Enzymatic degradation of these networks is quite fast, thus, the network with 36% PCL presented a remaining weight of 22 +/- 1% of their initial mass after 28 days of degradation in lipase. Nevertheless in purely hydrolytic degradation, the remaining weight was 86+3% for the same time and composition., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through the MAT2013-46467-C4-1-R and MAT2016-76039-C4-1-R Project, including FEDER funds. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Institute de Salud Carlos III with the assistance of the European Regional Development Fund. MAGG acknowledges a grant from the BES-2011-044740.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid polymer electrolytes based on lithium bis(trifluoromethanesulfonyl)imide/poly(vinylidene fluoride -co-hexafluoropropylene) for safer rechargeable lithium-ion batteries

  • Gonçalves, R.
  • Miranda, D.
  • Almeida, A. M.
  • Silva, M. M.
  • Lanceros-Méndez, S.
  • Costa, C. M.
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The increasing use of electronic portable systems and the consequent energy demand, leads to the need to improve energy storage systems. According to that and due to safety issues, high-performance non-flammable electrolytes and solid polymer electrolytes (SPE) are needed. SPE containing different amounts of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) into a poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP, polymer matrix have been prepared by solvent casting. The addition of LiTFSI into PVDF-HFP allows to tailor thermal, mechanical and electrical properties of the composite. In particular, the ionic conductivity of the composites increases with LiTFSI content, the best ionic conductivities of 0.0011 mS/cmat 25 degrees C and 0.23 mS/cmat 90 degrees C were obtained for the PVDF-HFP/LiTFSI composites with 80 wt % of LiTFSI. This solid electrolyte allows the fabrication of Li metallic/SPE/C-LiFePO4 half-cells with a discharge capacity of 51.2 mAh/ g at C/20. Further, theoretical simulations show that the discharge capacity value depends on the lithium concentration and percentage of free ions and is independent of the solid polymer electrolyte thickness. On the other hand, the voltage plateau depends on the SPE thickness. Thus, a solid electrolyte is presented for the next generation of safer solid-state batteries., The authors thank the FCT (Fundacao para a Ciencia e Tecnologia) for financial support under the framework of Strategic Funding grants UID/FIS/04650/2013, UID/EEA/04436/2013 and UID/QUI/0686/2016; and project no. PTDC/FIS-MAC/28157/2017. The authors also thank the FCT for financial support under grant SFRH/BPD/112547/2015 (C.M.C.). Financial support from the Basque Government Industry Department under the ELKARTEK and HAZITEK programs is also acknowledged. JMMD and JLGR acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1 and 3-R (including the FEDER financial support) CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance fromthe European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of multilayer Hydroxyapatite - Ag/TiN-Ti coatings deposited by radio frequency magnetron sputtering with potential application in the biomedical field

  • Lenis, J.A.
  • Bejarano, G.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The use of composite coatings is emerging as a great alternative to conventional coatings, allowing the combination of different superficial properties that are widely desired in surgical implants, such as osteointegration and bactericidal character, and cannot be provided by one material alone. In the present investigation the effect of the incorporation of a TiN-Ti intermediate bilayer on the chemical composition, structure, morphology, roughness, residual stresses and adhesion of a multi-layer Hydroxyapatite (HA)-Ag coating deposited on Ti-6Al-4V by magnetron sputtering was evaluated. Additionally, the cytotoxicity of the developed system was evaluated by in vitro tests. According to the results obtained, a decrease in the Ca/P ratio from 1.85 to 1.74 was obtained through the deposition of an HA-Ag system on the intermediate bilayer, and the crystallinity of the developed coating was favored. The multi-layer structure was effectively observed by field emission scanning electron microscopy, where it was possible to identify each of the HA, Ag, TiN and Ti layers. Meanwhile, an increase of 7% in crystallite size, a decrease of 36% in residual stresses and an increase of 32% in adhesion were registered for this composite coating compared to the free intermediate bilayer system. Finally, biological evaluation allowed the non-cytotoxic character of the deposited coatings to be confirmed., We thank the University of Antioquia, the Centro de Investigation, Innovation y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovation (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, PR and JLGR acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R (AEI/FEDER, UE) (including the FEDER financial support). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Institute de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crystallization kinetics of poly(ethylene oxide) confined in semicrystalline poly(vinylidene) fluoride

  • Tamaño-Machiavello, María Noel
  • Costa, C.M.
  • Romero Colomer, Francisco José
  • Lanceros-Méndez, S.
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Polymer blends based on poly(vinylidene fluoride) (PVDF) and poly(ethylene oxide) (PEO) have been prepared to analyze the crystallization kinetics of poly(ethylene oxide) confined in semicrystalline PVDF with different ratios of both polymers. Both blend components were dissolved in a common solvent, dimethyl formamide. Blend films were obtained by casting from the solution at 70 degrees C. Thus, PVDF crystals are formed by crystallization from the solution while PEO (which is in the liquid state during the whole process) is confined between PVDF crystallites. The kinetics of crystallization of the confined PEO phase was studied by isothermal and nonisothermal experiments. Fitting of Avrami model to the experimental DSC traces allows a quantitative comparison of the influence of the PVDF/PEO ratio in the blend on the crystallization behavior. The effect of melting and further recrystallization of the PVDF matrix on PEO confinement is also studied. (c) 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 588-597
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ionic and conformational mobility in poly(vinylidene fluoride)/ionic liquid blends: Dielectric and electrical conductivity behavior

  • Correia, D.M.
  • de Zea Bermudez, Veronica
  • Andrio Balado, Andre
  • Lanceros-Méndez, S.
  • Costa, C.M.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The glass transition dynamics and the charge transport for blends composed of poly(vinylidene fluoride) (PVDF) and the ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, [Emim] [TESI] have been investigated as a function of different IL content (0, 10, 25 and 40 % wt) by differential scanning calorimetry (DSC), dynamic-mechanical analysis (DMA) and broadband dielectric relaxation spectroscopy (BDS) in wide frequency and temperature ranges (0.1 Hz-1 MHz and -120 to 150 degrees C, respectively). The inclusion of the IL in the polymer matrix affected the main relaxation process (beta-relaxation) of the amorphous phase of the polymer matrix detected with all the techniques employed. It is demonstrated, that the chain segments of PVDF and the IL are mixed at the nanometer range. The blends were homogeneous regardless of the amount of IL and the glass transition temperature (Tg) shifted to lower temperatures as the IL content was increased. A good agreement between the Tg measured by BDS and DSC was observed for all PVDF/IL samples. The conductivity formalism revealed significant contributions of the IL concentration to the conductivity behavior of the blends in that is described by charge motion and electrode polarization effects. The activation energy of all the PVDF/IL samples, calculated by Dyre model, decreased with IL addition with respect to that of neat PVDF. (C) 2018 Elsevier Ltd. All rights reserved., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2013. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/CTM-ENE/5387/2014, PTDC/EEI-SII/5582/2014 and UID/CTM/50025/2013 and Grants SFRH/BPD/121526/2016 (D.M.C.), SFRH/BPD/112547/2015 (C.M.C.). Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry Department under the ELKARTEK and HAZITEK programs is also acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fluctuations of conformational mobility of macromolecules around the glass transition

  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Molina Mateo, José|||0000-0002-0531-9876
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The heterogeneity of local dynamics in disordered systems is behind some key features of glass transition. In order to improve our understanding of the molecular dynamics in disordered systems in the vicinity of the glass transition, different parameters have been proposed to quantitatively describe dynamical heterogeneity. In the case of polymers, free volume models relate the macromolecular mobility to the free or accessible volume. The relationship between dynamic heterogeneity and fluctuations of accessible volume seems straightforward. In the present work, the heterogeneity of local dynamics in polymeric systems is analyzed by computer simulation with the bond fluctuation model. The value of the accessible volume around each polymer chain is evaluated from a snapshot or static structure at each system state, resulting in a distribution of accessible volume that reflects system heterogeneity. The relationship between the average value and the standard deviation of free volume distributions at different temperatures fits amaster curve for different systems, regardless of the specific inter- and intramolecular interaction potentials that define each material. The dynamic slowdown around the glass transition is accompanied by a clear evolution of the mean value and shape of the accessible free volume distribution. The relative fluctuation of the dynamically accessible volume has been used as a parameter to quantitatively describe heterogeneity. The fluctuation varies with temperature with remarkable differences between the liquid and glassy states of the systems studied, presenting a peak at the glass transition temperature, which can be interpreted as a reflection of the distribution of local glass transition temperatures., The support from the Ministry of Economy and Competitiveness (Spain) through Project No. MAT2016-76039-C4-1-R (including the FEDER financial support) is gratefully acknowledged. R.S.S. acknowledges the support of the Ministry of Education, Culture and Sports (Spain) through the program "Estancias de movilidad de profesores e investigadores seniores en centros extranjeros de ensenanza superior e investigacion 2016 under Grant No. PRX16/00208". CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An innovative bioresorbable gelatin based 3D scaffold that maintains the stemness of adipose tissue derived stem cells and the plasticity of differentiated neurons

  • Martin, Catherine Ann
  • Radhakrishnan, Subathra
  • Nagarajan, Sakthivel
  • Muthukoori, Shanthini
  • Lakshmi, Baddrireddi Subhadra
  • Nivethaa, E. A. K.
  • Reddy, Mettu Srinivas
  • Sellathamby, Shanmugaapriya
  • Rela, Mohamed
  • Subbaraya, Narayana Kalkura
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
[EN] Neural tissue engineering aims at producing a simulated environment using a matrix that is suitable to grow specialized neurons/glial cells pertaining to CNS/PNS which replace damaged or lost tissues. The primary goal of this study is to design a compatible scaffold that supports the development of neural-lineage cells which aids in neural regeneration. The fabricated, freeze-dried scaffolds consisted of biocompatible, natural and synthetic polymers: gelatin and polyvinyl pyrrolidone. Physiochemical characterization was carried out using Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) imaging. The 3D construct retains good swelling proficiency and holds the integrated structure that supports cell adhesion and proliferation. The composite of PVP-gelatin is blended in such a way that it matches the mechanical strength of the brain tissue. The cytocompatibility analysis shows that the scaffolds are compatible and permissible for the growth of both stem cells as well as differentiated neurons. A change in the ratios of the scaffold components resulted in varied sizes of pores giving diverse surface morphology, greatly influencing the properties of the neurons. However, there is no change in stem cell properties. Different types of neurons are characterized by the type of gene associated with the neurotransmitter secreted by them. The change in the neuron properties could be attributed to neuroplasticity. The plasticity of the neurons was analyzed using quantitative gene expression studies. It has been observed that the gelatin-rich construct supports the prolonged proliferation of stem cells and multiple neurons along with their plasticity., Dr SNK is grateful to the Department of Biotechnology (DBT) BCIL/NER-BPMC/2014-1094 and SVAGATA for the financial support rendered. JMMD and JLGR are grateful for the fi nancial support of the Spanish Ministry of Economy and Competitiveness through the MINECO MAT2016-76039-C4-1-R project (including Feder funds). CIBER-BBN is an initiative funded by the VI National R&D & I Plan 2008-2011, "IniciativaIngenio 2010", Consolider Program. CIBER actions are financed by the "Instituto de Salud Carlos III" with assistance from the European Regional Development Fund. The authors also thank Department of Science and Technology (DST) - SR/WOS-A/LS-193/2012, for the financial support rendered for the cell culture experiments. The authors also thank Dr Jayanthi V., Mr Baskar S. S. and Dr Vishnuvardhanan M., for their contribution in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Ionic Liquid Content on the Crystallization Kinetics and Morphology of Semicrystalline Poly(vinylidene Fluoride)/Ionic Liquid Blends

  • Correia, Daniela M.
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The crystallization kinetics of poly(vinylidene fluoride) (PVDF) in blends with the ionic liquid (IL) 1-ethyl-3-methylimidazolium chloride [Emim][Cl] has been studied as a function of [Emim][Cl] content up to 40 wt %. Blends were produced by a solvent casting technique from diluted solutions and solvent evaporation at a temperature higher than the melting point of PVDF followed by cooling to room temperature. Polymer phase, morphology, and crystallization behavior were evaluated. When the molten blend was crystallized from the melt, it was observed that [Emim][Cl] induces nucleation of PVDF in the electroactive and highly polar beta-crystalline phase, while pure PVDF crystallizes in the a phase with the same thermal treatments. It is shown that PVDF crystal growth segregates an amorphous phase rich in IL molecules to the surface of the films and that the IL also remains in the spaces between the lamellae or between spherulites as demonstrated by scanning electronic microscopy (SEM) and polarizing optical microscope (POM) images. Differential scanning calorimetry results of isothermal crystallization show the dependence of equilibrium melting temperature and the Avrami exponent with the [Emim][Cl] content., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2020. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the Projects PTDC/BTM-MAT/28237/2017, PTDC/EMD-EMD/28159/2017, and PTDC/FIS-MAC/28157/2017. D.M.C. and C.M.C. also thank to the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, respectively. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the Project MAT2016-76039-C4-1 -R (AEI/FEDER, UE) (including the FEDER financial support), from the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project PID2019-106099RB-C43/AEI/10.13039/501100011033 and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZ-ITEK, and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.