Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bragg Gratings Inscribed in Solid-Core Microstructured Single-Mode Polymer Optical Fiber Drawn From a 3D-Printed Polycarbonate Preform

  • Zubel, Michal G.
  • Fasano, Andrea
  • Woyessa, Getinet Taffesse
  • Min, Rui
  • Leal-Junior, Arnaldo Gomes
  • Theodosiou, Antreas
  • Marques, Carlos A. F.
  • Rasmussen, Henrik K.
  • Bang, Ole
  • Kalli, Kyriacos
  • Frizera-Neto, Anselmo
  • Pontes, Maria Jose
  • Sugden, Kate
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper reports the first microstructured solid-core fiber drawn from a 3D-printed preform and the first fiber Bragg gratings inscribed in a fiber of this type. The presented fiber is made of polycarbonate and displays single-mode behavior. The fiber attenuation was the lowest reported so far for a POF drawn from a 3D-printed preform across a broad range of wavelengths. In addition, extensive fiber characterization results are presented and discussed including: fiber attenuation, mode simulations, dynamic thermomechanical analysis and thermo-optic coefficient. Fiber Bragg gratings are successfully inscribed in the produced fiber using three different lasers: a continuous wave helium-cadmium laser, a pulsed femtosecond frequency doubled ytterbium laser and ultra-violet nanosecond krypton fluoride laser. Mechanical testing of the fiber showed that the 3D printing approach did not introduce any unexpected or undesirable characteristics., This work was supported by the People Program (Marie Curie Actions) of the European Union's Seventh Framework Program FP7/2007-2013/, through Research Executive Agency (REA), under Grant 608382. The work of Carlos A. F. Marques was supported in part by the Fundacao para a Ciencia e a Tecnologia (FCT) under Grant UID/EEA/50008/2013, Grant UID/CTM/50025/2019, and Grant SAICTPAC/0036/2015, in part by the National Funds through the FCT/Ministerio da Educacao e Ciencia, in part by the European Regional Development Fund, through the PT2020 Partnership, and in part by national funds (OE), through FCT, in the scope of the framework contract foreseen in the numbers 4, 5, and 6 of the article 23 (Decree-Law 57/2016, August 29, changed by Law 57/2017, July 19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer optical fiber Bragg grating inscription with a single Nd:YAG laser pulse

  • Pereira, Luis
  • Min, Rui
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Marques, Carlos
  • Antunes, Paulo
  • Pinto, João L.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We experimentally demonstrate the first polymer optical fiber Bragg gratings inscribed with only one Nd: YAG laser (266 nm) pulse. The gratings have been inscribed in a single-mode poly (methyl methacrylate) optical fiber, with a core doped with benzyl dimethyl ketal for photosensitivity enhancement. One laser pulse with a duration of 8 ns and energy of 72 mu J is adequate to introduce a refractive index change of 0.5 x 10(-4) in the fiber core. The stability of the gratings has been confirmed and the strain and temperature sensitivity measurements demonstrate their tunable properties. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., FEDER funds through the COMPETE 2020 Programme, National Funds through FCT Portuguese Foundation for Science and Technology under the projects UID/CTM/50025/2013 and UID/EEA/50008/2013. C. Marques acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ionic and conformational mobility in poly(vinylidene fluoride)/ionic liquid blends: Dielectric and electrical conductivity behavior

  • Correia, D.M.
  • de Zea Bermudez, Veronica
  • Andrio Balado, Andre
  • Lanceros-Méndez, S.
  • Costa, C.M.
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The glass transition dynamics and the charge transport for blends composed of poly(vinylidene fluoride) (PVDF) and the ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide, [Emim] [TESI] have been investigated as a function of different IL content (0, 10, 25 and 40 % wt) by differential scanning calorimetry (DSC), dynamic-mechanical analysis (DMA) and broadband dielectric relaxation spectroscopy (BDS) in wide frequency and temperature ranges (0.1 Hz-1 MHz and -120 to 150 degrees C, respectively). The inclusion of the IL in the polymer matrix affected the main relaxation process (beta-relaxation) of the amorphous phase of the polymer matrix detected with all the techniques employed. It is demonstrated, that the chain segments of PVDF and the IL are mixed at the nanometer range. The blends were homogeneous regardless of the amount of IL and the glass transition temperature (Tg) shifted to lower temperatures as the IL content was increased. A good agreement between the Tg measured by BDS and DSC was observed for all PVDF/IL samples. The conductivity formalism revealed significant contributions of the IL concentration to the conductivity behavior of the blends in that is described by charge motion and electrode polarization effects. The activation energy of all the PVDF/IL samples, calculated by Dyre model, decreased with IL addition with respect to that of neat PVDF. (C) 2018 Elsevier Ltd. All rights reserved., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2013. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the projects PTDC/CTM-ENE/5387/2014, PTDC/EEI-SII/5582/2014 and UID/CTM/50025/2013 and Grants SFRH/BPD/121526/2016 (D.M.C.), SFRH/BPD/112547/2015 (C.M.C.). Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support) and from the Basque Government Industry Department under the ELKARTEK and HAZITEK programs is also acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.