Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Replication-Aware Data Dissemination for Vehicular Ad Hoc Networks using Location Determination

  • Kumar, Neeraj
  • Rodrigues, Joel J. P. C.
  • Dua, Amit
  • Lloret, Jaime|||0000-0002-0862-0533
Location determination is one of the most dif- ficult tasks to be achieved in Vehicular Ad Hoc networks (VANETs), as the nodes change their positions quickly due to high velocity. So, data dissemination to the vehicles in presence of high node mobility is one of the challenging issues to be resolved. To address these issues, in this paper, we propose a new Replication-Aware Data Dissemination (RADD) scheme for VANETs by estimating the location of the nodes. Separate algorithms are designed for position estimation, accessing the message from the remote vehicles, and route the packets to the destination. Also, vehicles on the road are sparsely distributed in some regions, so finding an appropriate vehicle for replica placement is also difficult as it needs a specialized approach. To search the suitable vehicle for replica placement, Bloom filters are used using which searching becomes fast and improves the overall per- formance of the system. Moreover, passive RFID tags are used on the vehicles and the RFID readers are placed on the RSUs to collect the data from these tags. These tags and readers are used to determine the vehicles positions in short range communication where GPS system does not work well. Hence, in the proposed scheme, there is no need of placement of access points on the either side of the road which reduces the complexity of the message dissemina- tion in the proposed scheme. The complexity analysis of the proposed scheme is evaluated in different network con- ditions with respect to data dissemination from source to destination. The performance of the proposed scheme was evaluated using different evaluation metrics in comparison to the other existing state-of-the-art schemes. The results obtained show that the proposed scheme performs better than the other existing schemes of its category with respect to various metrics. Specifically, there are improvements of 18 % in reliability, 27 % in replication cost, and 7 % in PDR with respect to the existing state-of-art protocols, The work has been funded by grant from Instituto de Telecomunicacoes, Next Generation Networks and Applications Group (NetGNA), Covilha Delegation, by Government of Russian Federation, Grant 074-U01, by National Funding from the FCT - Fundacao para a Ciencia e a Tecnologia through the UID/EEA/50008/2013 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bragg Gratings Inscribed in Solid-Core Microstructured Single-Mode Polymer Optical Fiber Drawn From a 3D-Printed Polycarbonate Preform

  • Zubel, Michal G.
  • Fasano, Andrea
  • Woyessa, Getinet Taffesse
  • Min, Rui
  • Leal-Junior, Arnaldo Gomes
  • Theodosiou, Antreas
  • Marques, Carlos A. F.
  • Rasmussen, Henrik K.
  • Bang, Ole
  • Kalli, Kyriacos
  • Frizera-Neto, Anselmo
  • Pontes, Maria Jose
  • Sugden, Kate
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper reports the first microstructured solid-core fiber drawn from a 3D-printed preform and the first fiber Bragg gratings inscribed in a fiber of this type. The presented fiber is made of polycarbonate and displays single-mode behavior. The fiber attenuation was the lowest reported so far for a POF drawn from a 3D-printed preform across a broad range of wavelengths. In addition, extensive fiber characterization results are presented and discussed including: fiber attenuation, mode simulations, dynamic thermomechanical analysis and thermo-optic coefficient. Fiber Bragg gratings are successfully inscribed in the produced fiber using three different lasers: a continuous wave helium-cadmium laser, a pulsed femtosecond frequency doubled ytterbium laser and ultra-violet nanosecond krypton fluoride laser. Mechanical testing of the fiber showed that the 3D printing approach did not introduce any unexpected or undesirable characteristics., This work was supported by the People Program (Marie Curie Actions) of the European Union's Seventh Framework Program FP7/2007-2013/, through Research Executive Agency (REA), under Grant 608382. The work of Carlos A. F. Marques was supported in part by the Fundacao para a Ciencia e a Tecnologia (FCT) under Grant UID/EEA/50008/2013, Grant UID/CTM/50025/2019, and Grant SAICTPAC/0036/2015, in part by the National Funds through the FCT/Ministerio da Educacao e Ciencia, in part by the European Regional Development Fund, through the PT2020 Partnership, and in part by national funds (OE), through FCT, in the scope of the framework contract foreseen in the numbers 4, 5, and 6 of the article 23 (Decree-Law 57/2016, August 29, changed by Law 57/2017, July 19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bragg Gratings Inscription in TS-Doped PMMA POF by Using 248-nm KrF Pulses

  • Min, Rui
  • Hu, Xuehao
  • Broadway, Christian
  • Caucheteur, Christophe
  • Pun, Chi-Fung Jeff
  • Tam, Hwa-Yaw
  • Antunes, Paulo
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate the Bragg gratings inscription in the 850-nm spectral region by using trans-4-stilbenemethanol-doped poly methyl methacrylate step-index optical fiber and a 248-nm krypton fluoride (KrF) excimer laser system. The gratings inscription only takes 0.4 s. A detailed study of the grating fabrication process using different pulse repetition rates is also reported. In addition, temperature, humidity, and strain sensitivities are measured to demonstrate the potentiality of these components for different sensing applications., The research leading to these results has received funding from the Fundacao para a Ciencia e Tecnologia (FCT)/MEC national funds and when applicable co-funded by FEDER-PT2020 Partnership Agreement under Project UID/EEA/50008/2013. This work was also supported in part by the Research Excellence Award Programme GVA Prometeo 2017/103 Future Microwave Photonics Technologies and Applications, and in part by the Fundamental Research Funds for the Heilongjiang Provincial Universities under Grant KJCXZD201703. The work of C. Marques was supported by FCT through the Fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring Social Networks and Improving Hypertext Results for Cloud Solutions

  • Costa, J.E.F.
  • Rodrigues, Joel José Puga Coelho
  • Simões, T.M.C.
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Internet technologies are constantly evolving as well as the way people use them. Search engines help users to find higher and better relevant results to their searches. Cloud Computing is an evolution of the Internet services and provides a step further ecosystem that can be used to improve the search of more relevant results. Each search engine is based on different modules in order to retrieve the results expected by users using specific keywords. Social networks appear as a reliable Web technology that can directly support a content search. Several studies have been performed showing the growth of social networks in people lives. Using the cloud computing paradigm it is possible to propose a more scalable and efficient way to explore public information available on online social networks. This paper includes the analyses of several social networks services, available contents, cloud-crawlers, and information extraction. In order to collect relevant data from social networks, a social crawler on cloud is proposed. The new approach provides a cloud-based crawler for low-cost, effective, and personalized search models. Moreover, a new algorithm to rank Web documents is proposed and demonstrated. The proposed system is evaluated in comparison with the top Internet search engine, Google, its behavior is very promising, and it is ready for use., This work has been partially supported by Instituto de Telecomunicações, Next Generation Networks and Applications Group (NetGNA), Covilhã Delegation, by National Funding from the FCT - Fundação para a Ciência e a Tecnologia through the UID/EEA/500008/2013 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Largely tunable dispersion chirped polymer FBG

  • Min, Rui
  • Korganbayev, Sanzhar
  • Molardi, Carlo
  • Broadway, Christian
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Antunes, Paulo
  • Tosi, Daniele
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a largely tunable dispersion fiber Bragg grating (FBG) inscribed in a microstructured polymer optical fiber (mPOF). The bandwidth of the chirped FBG (CFBG) was achieved from 0.11 to 4.86 nm, which corresponds to a tunable dispersion range from 513.6 to 11.15 ps/nm. Furthermore, thermal sensitivity is used to compensate for the wavelength shift due to the applied strain. These results demonstrate that a CFBG in a POF is a promising technology for future optical systems. (C) 2018 Optical Society of America, Fundacao para a Ciencia e a Tecnologia (FCT) (SFRH/BPD/109458/2015, UID/EEA/50008/2013); Research Excellence Award Programme GVA (PROMETEO 2017/103); Oak Ridge Associated Universities (ORAU) (LIFESTART (2017-2019)); Natural Science Foundation of Heilongjiang Province (F2018026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymer optical fiber Bragg grating inscription with a single Nd:YAG laser pulse

  • Pereira, Luis
  • Min, Rui
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Marques, Carlos
  • Antunes, Paulo
  • Pinto, João L.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We experimentally demonstrate the first polymer optical fiber Bragg gratings inscribed with only one Nd: YAG laser (266 nm) pulse. The gratings have been inscribed in a single-mode poly (methyl methacrylate) optical fiber, with a core doped with benzyl dimethyl ketal for photosensitivity enhancement. One laser pulse with a duration of 8 ns and energy of 72 mu J is adequate to introduce a refractive index change of 0.5 x 10(-4) in the fiber core. The stability of the gratings has been confirmed and the strain and temperature sensitivity measurements demonstrate their tunable properties. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., FEDER funds through the COMPETE 2020 Programme, National Funds through FCT Portuguese Foundation for Science and Technology under the projects UID/CTM/50025/2013 and UID/EEA/50008/2013. C. Marques acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ALBAYZIN Query-by-example Spoken Term Detection 2016 evaluation

  • Tejedor, Javier
  • Toledano, Doroteo T.
  • Lopez-Otero, Paula
  • Docio-Fernandez, Laura
  • Proença, Jorge
  • Perdigão, Fernando
  • Pompili, Anna
  • Abad, Alberto
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
[EN] Query-by-example Spoken Term Detection (QbE STD) aims to retrieve data from a speech repository given an acoustic (spoken) query containing the term of interest as the input. This paper presents the systems submitted to the ALBAYZIN QbE STD 2016 Evaluation held as a part of the ALBAYZIN 2016 Evaluation Campaign at the IberSPEECH 2016 conference. Special attention was given to the evaluation design so that a thorough post-analysis of the main results could be carried out. Two different Spanish speech databases, which cover different acoustic and language domains, were used in the evaluation: the MAVIR database, which consists of a set of talks from workshops, and the EPIC database, which consists of a set of European Parliament sessions in Spanish. We present the evaluation design, both databases, the evaluation metric, the systems submitted to the evaluation, the results, and a thorough analysis and discussion. Four different research groups participated in the evaluation, and a total of eight template matching-based systems were submitted. We compare the systems submitted to the evaluation and make an in-depth analysis based on some properties of the spoken queries, such as query length, single-word/multi-word queries, and in-language/out-of-language queries., This work was partially supported by Fundacao para a Ciencia e Tecnologia (FCT) under the projects UID/EEA/50008/2013 (pluriannual funding in the scope of the LETSREAD project) and UID/CEC/50021/2013, and Grant SFRH/BD/97187/2013. Jorge Proenca is supported by the SFRH/BD/97204/2013 FCT Grant. This work was also supported by the Galician Government ('Centro singular de investigacion de Galicia' accreditation 2016-2019 ED431G/01 and the research contract GRC2014/024 (Modalidade: Grupos de Referencia Competitiva 2014)), the European Regional Development Fund (ERDF), the projects "DSSL: Redes Profundas y Modelos de Subespacios para Deteccion y Seguimiento de Locutor, Idioma y Enfermedades Degenerativas a partir de la Voz" (TEC2015-68172-C2-1-P) and the TIN2015-64282-R funded by Ministerio de Economia y Competitividad in Spain, the Spanish Government through the project "TraceThem" (TEC2015-65345-P), and AtlantTIC ED431G/04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bragg Grating Inscription With Low Pulse Energy in Doped Microstructured Polymer Optical Fibers

  • Min, Rui
  • Nielsen, K.
  • Bang, Ole
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate that fiber Bragg gratings (FBGs) can be written in a doped polymer optical fiber (POF) in a low ultraviolet (UV) pulse energy regime (60 ¿J/pulse) using a 248-nm krypton fluoride excimer laser system. The total energy density per inscription necessary to obtain Bragg gratings is between 493.6 and 3825 mJ/cm2, depending on the number of pulses and the pulse energy. The impact of the pulse energy on the growth of the Bragg grating is investigated, and it is shown that the 248-nm light induces a positive refractive index change. This article demonstrates that the FBGs can be obtained in the POFs without high pulse energy (mJ level) at 248-nm wavelength, which reduces maintenance costs. Furthermore, we can consider it as a solution to increase the lifetime of the laser system without high energy still allowing fast and efficient production of the FBGs for sensing applications., This work was supported in part by the UID/EEA/50008/2013; in part by the SFRH/BPD/109458/2015; in part by the KJCXZD201703; and in part by the GVA PROMETEO2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fabrication of tunable chirped mPOF Bragg gratings using a uniform phase mask

  • Min, Rui
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate chirped Bragg gratings fabrication in doped microstructured tapered polymer fibers by using a uniform phase mask. The use of high photosensitive benzyl dimethyl ketal (BDK) doped core fiber allows to obtain chirped Bragg gratings by means of a single krypton fluoride laser pulse. The stability of the gratings has been confirmed and the strain and temperature sensitivity measurements demonstrate their tunable properties. Finally, different tapered profiles have been implemented in order to show the potentiality of this fabrication technique in polymer optical fibers. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., This work was supported by Fundação para a Ciência e Tecnologia (FCT)/MEC through national funds and when applicable co-funded by FEDER PT2020 partnership agreement under the project UID/EEA/50008/2013. C. A. F. Marques also acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015. The authors also acknowledge the Research Excellence Award Programme GVA PROMETEO 2017/103 FUTURE MICROWAVE PHOTONIC TECHNOLOGIES AND APPLICATIONS and Fundamental Research Funds for the Heilongjiang Provincial Universities (KJCXZD201703).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hot water-assisted fabrication of chirped polymer optical fiber Bragg gratings

  • Min, Rui
  • Broadway, Christian
  • Caucheteur, Christophe
  • Woyessa, G.
  • Bang, Ole
  • Antunes, Paulo
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We obtained chirped gratings by performing hot water gradient thermal annealing of uniform poly (methylmethacrylate) (PMMA) microstructured polymer optical fiber Bragg gratings (POFBGs). The proposed method's simplicity is one of its main advantages because no special phase mask or additional etching are needed. It not only enables easy control tuning of the central wavelength and chirp characteristics, but it also leads to obtain flexible grating response, compared with tapered chirped POFBGs. Therefore, a flexible and low-cost chirped POFBG devices fabrication technique has been presented by using a single uniform phase mask. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, This work was supported by Fundação para a Ciência e Tecnologia (FCT)/MEC through national funds, when applicable co-funded by FEDER PT2020 partnership agreement under the project UID/EEA/50008/2013 and the Research Excellence Award Programme GVA PROMETEO 2017/103 Future Microwave Photonics Technologies and applications, Science Foundation of Heilongjiang Province of China (F2018026). C. A. F. Marques also acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast inscription of long period gratings in microstructured polymer optical fibers

  • Min, Rui
  • Marques, Carlos
  • Nielsen, K.
  • Bang, Ole
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate 20 dB long period grating (LPG) fast inscription in microstructured polymer optical fibers (mPOFs) using a point-by-point technique obtaining an LPG total length of 25 mm. Two 248 nm UV laser pulses of 15 ns duration have been employed for every inscription point, which means a time reduction by over 21 times compared with the fastest inscription time already reported in literature. The device has been fabricated in a single-mode mPOF with a core that has been doped with benzyl dimethyl ketal for photosensitivity enhancement. Moreover, we characterize the strain and temperature responses and the stability of the fabricated gratings response under different conditions in order to assess the viability for different applications., This work was supported in part by the Fundacao para a Ciencia e Tecnologia/MEC through national funds, in part by FEDER-PT2020 partnership agreement under the Projects UID/EEA/50008/2013, in part by the Research Excellence Award Programme GVA PROMETEO 2017/103 Future Microwave Photonic Technologies and Applications and Fundamental Research Funds for the Heilongjiang Provincial Universities under Grant KJCXZD201703. The work of C. Marques was supported by the FCT through the Fellowship under Grant SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Moiré phase-shifted fiber Bragg gratings in polymer optical fibers

  • Min, Rui
  • Marques, Carlos
  • Bang, Ole
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a simple way to fabricate phase-shifted fiber Bragg grating in polymer optical fibers as a narrowband transmission filter for a variety of applications at telecom wavelengths. The filters have been fabricated by overlapping two uniform fiber Bragg gratings with slightly different periods to create a Moire grating with only two pulses (one pulse is 15 ns) of UV power. Experimental characterization of the filter is provided under different conditions where the strain and temperature sensitivities were measured., The research leading to these results has received funding from the Fundacao para a Ciencia e Tecnologia (FCT - Portugal)/MEC through national funds and when applicable co-funded by FEDER - PT2020 partnership agreement under the project UID/EEA/50008/2013. C. A. F. Marques also acknowledges the financial support from FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal profile detection through high-sensitivity fiber optic chirped Bragg grating on microstructured PMMA fiber

  • Korganbayev, Sanzhar
  • Min, Rui
  • Jelbuldina, Madina
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, Ole
  • Marques, Carlos
  • Tosi, Daniele
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] In this work, a linearly chirped fiber Bragg grating (CFBG) inscribed in a microstructured polymer optical fiber (mPOF) has been demonstrated for detecting temperature pro- files during thermal treatments. A CFBG of 10 mm length and 0.98 nm bandwidth has been inscribed in a mPOF fiber by means of a KrF laser and uniform phase mask. The CFBG has a high temperature sensitivity of -191.4 pm/°C). The CFBG has been used as a semi-distributed temperature sensor, capable of detecting the temperature profile along the grating length, for scenarios that account minimally invasive biomedical treatments. Two experiments have been designed to validate the CFBG tem- perature reconstruction, using a linear gradient, and a research- grade radiofrequency ablation (RFA) setup to apply Gaussian- shaped temperature spatial profiles. The result is that the higher sensitivity of the CFBG supports the detection of spatially non- uniform temperature fields by means of spectral reconstruction., This work was supported in part by Nazarbayev University, Research Council (ORAU project LIFESTART), in part by Fundacao para a Ciencia e Tecnologia (FCT)/MEC through National funds and when applicable co-funded by FEDER PT2020 partnership agreement under the project UID/EEA/50008/2013, and in part by the Research Excellence Award Programme GVA PROMETEO 2017/103 FUTURE MICROWAVE PHOTONIC TECHNOLOGIES AND APPLICATIONS. The work of C. Marques was supported by FCT through the fellowship SFRH/BPD/109458/2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructured PMMA POF chirped Bragg gratings for strain sensing

  • Min, Rui
  • Broadway, Christian
  • Hu, Xuehao
  • Caucheteur, Christophe
  • Bang, O.
  • Antunes, Paulo
  • Marques, Carlos
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a chirped microstructured polymer fiber Bragg grating based on taper technology for strain sensing application. The effective bandwidth of the grating is dependent on strain and remains practically constant with respect to temperature and humidity changes. We report a sensitivity of 0.90 pm/mu e for the central wavelength under stable temperature and humidity values. The 3-dB bandwidth of the grating has been measured under different temperature and humidity conditions., The authors acknowledge the financial support from FCT through the fellowship SFRH/BPD/109458/2015, program UID/EEA/50008/2013 by the National Funds through the Fundacao para a Ciencia e a Tecnologia/Ministerio da Educacao e Ciencia, and the European Regional Development Fund under the PT2020 Partnership Agreement. This work was also supported by the Research Excellence Award Programme GVA PROMETEO 2017/103 and the Science Foundation of Heilongjiang Province of China (2018026).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast and stable gratings inscription in POFs made of different materials with pulsed 248 nm KrF laser

  • Marques, Carlos
  • Min, Rui
  • Leal-Junior, A.
  • Antunes, Paulo
  • Fasano, A.
  • Woyessa, G.
  • Nielsen, Kristian
  • Rasmussen, H.K.
  • Bang, Ole
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper presents fiber Bragg grating (FBG) inscription with a pulsed 248 nm UV KrF laser in polymer optical fibers (POFs) made of different polymers, namely polymethyl methacrylate (PMMA), cyclic-olefin polymer and co-polymer, and Polycarbonate. The inscribed gratings and the corresponding inscription parameters are compared with grating inscribed in POFs made of the aforementioned materials but with the hitherto most used laser for inscription, which is a continuous wave 325 nm UV HeCd laser. Results show a reduction of the inscription time of at least 16 times. The maximum time reduction is more than 130 times. In addition, a reflectivity and a bandwidth close to or higher than the ones with the 325 nm laser were obtained. The polymer optical fiber Bragg gratings (POFBGs) inscribed with the 248 nm laser setup present high stability with small variations in their central wavelength, bandwidth, and reflectivity after 40 days. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement., Fundacao para Ciencia e a Tecnologia (FCT) (SFRH/BPD/109458/2015, UID/EEA/50008/2013).