Pasar al contenido principal

RESPUESTA DE LAS PROPIEDADES ADHESIVAS DE PATOGENOS A LA LIBERACION CONTROLADA DE COMPUESTOS ACTIVOS NATURALES

RTI2018-096862-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE EXTREMADURA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical, structural, and biological evaluation of multilayer HA-Ag/ TiO2/TiN/Ti coatings on Ti6Al4V obtained by magnetron sputtering for implant applications

  • Lenis, J.A.
  • Contreras Romero, Elbert
  • Hurtado Macías, Abel
  • Pacha-Olivenza, M.A.
  • González-Martín, M.L.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In the present work the surface of Ti6Al4V alloy, widely used for the fabrication of implants, was modified by incorporating a novel biocompatible and antibacterial coating composed of multiple layers of hydroxyapatite (HA) and Ag deposited on a TiO2/TiN/Ti trilayer. During the characterization of the coatings, their chemical and phase compositions were evaluated by energy dispersive X-ray spectroscopy and X-ray diffraction. Structural, topographical, and morphological studies were performed by focused ion beam, field emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Mechanical properties were determined by nano indentation and micro scratch test. Finally, the in vitro biological response was evaluated by cell viability tests with mouse mesenchymal stem cells, while bacterial viability was evaluated with Staphylo-coccus aureus strain. The results obtained show great chemical and compositional control, identifying HA (Ca/P close to 1.67) and anatase phases for TiO2. Additionally, an architecture composed of nanometric layers forming a HA-Ag/TiO2/TiN/Ti coating with granular morphology was obtained. The incorporation of multiple Ag layers in the HA structure led to a decrease of about 44 % in its hardness, obtaining values of up to 6.3 GPa. Meanwhile, there was a relief in the residual stresses of >50 %, which generated increases of up to 74 % in the adhesion of the coatings to the substrate The biological tests showed that biocompatible coatings with high antibacterial potential were obtained., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia). The experimental work performed at the CBIT was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RBC41/AEI/10.13039/501100011033 and RTI2018-096794-B-I00 projects. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged. The authors are grateful to Junta de Extremadura and FEDER for grants GR18153 and IB20092. The project RTI2018-096862B-I00, supported by MCIN/AEI/10.13039/501100011033/and by FEDER "Una manera de hacer Europa", is also highly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure, morphology, adhesion and in vitro biological evaluation of antibacterial multi-layer HA-Ag/SiO2/TiN/Ti coatings obtained by RF magnetron sputtering for biomedical applications

  • Lenis, J. A.
  • Pacha-Olivenza, M. A.
  • González-Martín, M. L.
  • Bolívar, F. J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Biocompatible and antibacterial multi-layer coatings of hydroxyapatite (HA)-Ag/SiO2/TiN/Ti were obtained on the Ti-6Al-4V alloy, by means of the magnetron sputtering technique. During characterization of the coatings, the chemical composition was evaluated by energy dispersive X-ray spectroscopy and the phase analysis was carried out by X-ray diffraction. The morphology of the coatings was observed by field emission scanning electron microscopy, while transmission electron microscopy was used to appreciate their structure. The adhesion of the coatings to the substrate was evaluated by micro scratch test. The in vitro biological response was evaluated in terms of cytotoxicity, adhesion and differentiation of mouse mesenchymal stem cells, as well as adhesion and bacterial viability of Staphylococcus aureus strain. Through the compositional study carried out, the deposition of the HA phase was verified, with a Ca/P ratio close to 1.67 and the characteristic diffraction peaks of this compound. The structural study of the coatings evidenced the obtention of multi-layer architectures. The use of an intermediate SiO2/TiN/Ti trilayer was found to improve adhesion between HA-Ag and the substrate by 84%. Finally, the in vitro biological tests carried out indicated a potentially non-toxic character in the coatings. Additionally, an antibacterial effect was registered at low concentrations of Ag (< 0.25 mg/L)., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia), JLGR acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R and MAT 2015-63974-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-096794), and Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund, M-ERA.NET PCIN-2016-146 and RTI2018-096862-B-I00, Spanish "Junta de Extremadura" for the projects IB16117, TE-0016-18 and GR18153.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of PLA/Mg films degradation on surface physical properties and biofilm survival

  • Fernández-Calderón, M. C.
  • Romero-Guzmán, D.
  • Ferrández-Montero, Ana
  • Pérez-Giraldo, C.
  • González-Carrasco, José Luis
  • Lieblich, Marcela
  • Benavente, Rosario
  • Ferrari, Begoña
  • González-Martín, M. L.
  • Gallardo-Moreno, A. M.
New biocompatible and bioabsorbable materials are currently being developed for bone regeneration. These serve as scaffolding for controlled drug release and prevent bacterial infections. Films of polylactic acid (PLA) polymers that are Mg-reinforced have demonstrated they have suitable properties and bioactive behavior for promoting the osseointegration process. However little attention has been paid to studying whether the degradation process can alter the adhesive physical properties of the biodegradable film and whether this can modify the biofilm formation capacity of pathogens. Moreover, considering that the concentration of Mg and other corrosion products may not be constant during the degradation process, the question that arises is whether these changes can have negative consequences in terms of the bacterial colonization of surfaces. Bacteria are able to react differently to the same compound, depending on its concentration in the medium and can even become stronger when threatened. In this context, physical surface parameters such as hydrophobicity, surface tension and zeta potential of PLA films reinforced with 10% Mg have been determined before and after degradation, as well as the biofilm formation capacity of Staphylococcus epidermidis. The addition of Mg to the films makes them less hydrophobic and the degradation also reduces the hydrophobicity and increases the negative charge of the surface, especially over long periods of time. Early biofilm formation at 8 h is consistent with the physical properties of the films, where we can observe a reduction in the bacterial biofilm formation. However, after 24 h of incubation, the biofilm formation increases significantly on the PLA/Mg films with respect to PLA control. The explosive release of Mg ions and other corrosion products within the first hours were not enough to prevent a greater biofilm formation after this initial time. Consequently, the Mg addition to the polymer matrix had a bacteriostatic effect but not a bactericidal one. Future works should aim to optimize the design and biofunctionality of these promising bioabsorbable composites for a degradation period suitable for the intended application., The authors gratefully acknowledge financial support from “Ministerio de Economía y Competitividad” (PCIN-2016-146, MAT2015-63974-C4-3-R, MAT2015-63974-C4-4-R, MAT2016-79869-C2-1-P, RTI2018-096862-B-I00 (AEI/FEDER;UE)) and “Junta de Extremadura-FEDER: European Regional Development Fund” (IB16117, IB16154, GR15089, GR15025, GR18153 and GR18096). Dr. María Carbajo Sánchez is also thanked for providing valuable technical assistance with SEM in the “Servicio de análisis y caracterización de sólidos y superficies (SACSS)” within the University of Extremadura.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From radial to unidirectional water pumping in zeta-potential modulated Nafion nanostructures

  • Esplandiú, María J.
  • Reguera, David
  • Romero-Guzmán, D.
  • Gallardo-Moreno, A. M.
  • Fraxedas, J.
Chemically propelled micropumps are promising wireless systems to autonomously drive fluid flows for many applications. However, many of these systems are activated by nocuous chemical fuels, cannot operate at high salt concentrations, or have difficulty for controlling flow directionality. In this work we report on a self-driven polymer micropump fueled by salt which can trigger both radial and unidirectional fluid flows. The micropump is based on the cation-exchanger Nafion, which produces chemical gradients and local electric fields capable to trigger interfacial electroosmotic flows. Unidirectional pumping is predicted by simulations and achieved experimentally by nanostructuring Nafion into microarrays with a fine tune modulation of surrounding surface zeta potentials. Nafion micropumps work in a wide range of salt concentrations, are reusable, and can be fueled by different salt cations. We demonstrate that they work with the common water-contaminant cadmium, using the own capture of this ion as fuel to drive fluid pumping. Thus, this system has potential for efficient and fast water purification strategies for environmental remediation. Unidirectional Nafion pumps also hold promise for effective analyte delivery or preconcentration for (bio)sensing assays., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract No. FIS2015-67837, and PGC2018-095032-B-100. Thanks also to project RTI2018-096862-B-I00, supported by MCIN/ AEI /10.13039/501100011033/ FEDER “Una manera de hacer Europa” and to grants TE-0033-19, GR21119, and IB20092 by the Junta de Extremadura- FEDER (European Regional Development Fund). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of MINECO (Grant SEV-2017-0706). We also acknowledge the scientific exchange and support of the Center for Molecular Water Science (CMWS).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

From radial to unidirectional water pumping in zeta-potential modulated Nafion nanostructures

  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Reguera, David|||0000-0001-6395-6112
  • Romero-Guzmán, Daniel|||0000-0001-5520-6303
  • Gallardo-Moreno, Amparo M.
  • Fraxedas, Jordi|||0000-0002-2821-4831
Chemically propelled micropumps are promising wireless systems to autonomously drive fluid flows for many applications. However, many of these systems are activated by nocuous chemical fuels, cannot operate at high salt concentrations, or have difficulty for controlling flow directionality. In this work we report on a self-driven polymer micropump fueled by salt which can trigger both radial and unidirectional fluid flows. The micropump is based on the cation-exchanger Nafion, which produces chemical gradients and local electric fields capable to trigger interfacial electroosmotic flows. Unidirectional pumping is predicted by simulations and achieved experimentally by nanostructuring Nafion into microarrays with a fine tune modulation of surrounding surface zeta potentials. Nafion micropumps work in a wide range of salt concentrations, are reusable, and can be fueled by different salt cations. We demonstrate that they work with the common water-contaminant cadmium, using the own capture of this ion as fuel to drive fluid pumping. Thus, this system has potential for efficient and fast water purification strategies for environmental remediation. Unidirectional Nafion pumps also hold promise for effective analyte delivery or preconcentration for (bio)sensing assays.