Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the electrical characteristics of poly(vinylidene fluoride) hybrid composites incorporating the metal organic framework HKUST-1 and nanoconfined [Bmim]2[NiCl4] ionic liquid

  • Goncalves, Bruna F.
  • Balado, Andreu Andrio
  • Correia, Daniela M.
  • Fernandes, Liliana
  • Tariq, M.
  • Esperança, Jose M. S. S.
  • Costa, Carlos M.
  • Lanceros-Mendez, Senentxu
  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This study reports ternary hybrid composites based on a poly(vinylidene fluoride) (PVDF) polymer matrix incorporating metal-organic framework (MOF) microparticles (HKUST-1), and an ionic liquid (IL) (bis(1-butyl-3methylimidazolium) tetrachloronickelate ([Bmim]2[NiCl4])), the pores of HKUST-1 being filled with the IL to tune the composite's electrical response. It is shown that introducing MOF and IL separately promotes nucleation of the electroactive phase of the polymer. However, the electroactive phase content of the PVDF/HKUST/IL composite lies between that of the MOF and IL composites. In IL-containing composites, the dielectric response is dominated by interfacial polarisation and a conductivity-related peak, which mask the beta-relaxation. The distribution of IL throughout the PVDF matrix and at the MOF-polymer interfaces causes the PVDF/HKUST/IL hybrid composite to display intermediate conductivity values between those of the PVDF/HKUST and PVDF/IL systems. While the IL dispersed within the PVDF matrix promotes ion transport and enhances conductivity, the IL located at the MOF-polymer interfaces may experience partial confinement or limited mobility. This dual-confinement effect allows for the precise "tuning" of conductivity and dielectric relaxation. The tailoring of electrical characteristics of these ternary composites provides a pathway for the development of electroactive materials suitable for a wide range of application requirements., This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) , by Generalitat Valenciana and by the IKUR program of the Basque Government. The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UID/04650/2025: Physics Centre of Minho and Porto Universities (CF-UM-UP) (https://doi.org/10.54499/UID/04650/2025) , UID/00686: Chemistry Centre of University of Minho (CQ-UM/UM) , UID/FIS/04650/2020, UID/50006/2023 and 10.54499/LA/P/0008/2020 of the Associate Laboratory for Green Chemistry-LAQV REQUIMTE and under projects 10.54499/2022.03931.PTDC, 2022.05932.PTDC and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI) . The authors also thank the FCT for financial support under FCT investigator contract 2020.02915.CEECIND (D.M.C) . The authors thank the Basque Government Education and Industry departments for funding under the IKUR and Elkartek programs, respectively. This research was also supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red-(CB06/01/1026) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with HR-FESEM characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increased electroactive properties of poly(vinylidene fluoride) films by thermo-mechanical post-processing

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Pereira, N.
  • Costa, C. M.
  • Lanceros-Mendez, S.
[EN] Due to its outstanding electroactive properties, poly(vinylidene fluoride) (PVDF) is widely used in the energy, electronic, and biomedical fields. In particular, the highly polar and electroactive ß-phase obtained by low temperature solvent evaporation has numerous technological applications due to its piezo-, pyro- and ferroelectric properties, but typically presents a porous morphology. PVDF membranes were prepared by non-solvent induced phase separation (NIPS) from a dimethylformamide (DMF) solution, and post-processed by thermo-mechanical compression under varying temperature and pressure to produce solid films. The effect of these parameters on the morphology, ß-phase content, thermal properties, crystalline phase content and piezoelectric response was evaluated. Thermo-mechanical treatment reduces porosity leading to a compact morphology, while also increases the ßphase content and the degree of crystallinity. Also, it enhances the mechanical properties and increases the piezoelectric value. It is to notice that this simple processing method is compatible with the large-scale manufacturing of electroactive PVDF samples in an industrial setting., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UID/ 04650: Physics Centre of Minho and Porto Universities (CF-UM-UP), UID/FIS/04650/2020 and Project 10.54499/2022.03931.PTDC. The authors also thank the FCT for financial support under FCT investigator contract 2020.04028.CEECIND (DOI: 10.54499/2020.04028. CEECIND/CP1600/CT0018) (C.M.C.). The authors thank the Basque Government Industry Departments for funding under the Elkartek program. The work of the Spanish group has been funded by MCIN/AEI/10.13039/501100011033/FEDER Grants PID2022-138572OB-C41 and -C42 and by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization, as well as Carolina from the Food Engineering University Institute for helping in DSC characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the electrical conductivity of Poly(vinylidene fluoride) by blending with poly (3,4-ethylenedioxythiophene) Polystyrene sulfonate (PEDOT:PSS) and ionic liquids

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Andrio Balado, Andreu
  • Correia, Daniela M.
  • Fernandes, Liliana
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
[EN] In order to tailor dielectric response and electrical conductivity, novel polymer blends based on poly(vinylidene fluoride (PVDF) and different fillers composed by poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), and PEDOT:PSS/ionic liquids (ILs): PEDOT:PSS/N-ethyl-N-methylpyrrolidinium bis(fluorosulfonyl)imide ([C(2)mpyr][FSI]) and PEDOT:PSS/N-ethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide ([C(2)mpyr][TFSI]), with different PEDOT:PSS/IL contents (10, 20 and 40 wt%) were prepared through solvent casting. The morphological, physical-chemical and thermal properties of the polymer blends were evaluated, together with the influence of PEDOT:PSS/IL on the PVDF crystallization kinetics, dielectric and electrical conductivity.The incorporation of PEDOT:PSS/IL in the polymer matrix lead to a decrease of the PVDF spherulites. Furthermore, it was detected that both PEDOT:PSS and IL act as nucleation agents, promoting the homogeneous crystallization of PVDF as well as the crystallization into its b and g polar phases. The electrical conductivity formalism revealed significant contributions of PEDOT:PSS/IL to the electrical conductivity behavior of the blends, being thermally activated and described by the charge transport mechanism. Further, the dc conductivity increases due to the higher number of charge carriers of the PEDOT:PSS/IL content.The tailorable electrical characteristics of the PVDF/PEDOT:PSS-IL blends demonstrate their potential for applications in areas such as ionic actuators and battery devices., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, UID/EEA/04436/2020, and UID/QUI/0686/2020 and under projects, MIT-EXPL/TDI/0033/2021, 2022.03931. PTDC and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under grant SFRH/BD/145345/2019 (L.F.), and FCT investigator contracts 2020.02915. CEECIND (D.M.C), and 2020.04028. CEE-CIND (C.M.C.). Financial support from the Basque Government Industry Department under the ELKARTEK program is acknowledged. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU).This work was funded by the Spanish State Research Agency (AEI) through the Grant number PID2022-138572OB-C41 and PID2022-138572OB-C42. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Micro-scopy Service of the UPV (Universitat Politecnica de Valencia) is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Serra, J. P.
  • Correia, Daniela M.
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
[EN] The influence ofthe inclusion of the organic solvent propylenecarbonate (PC) in microporous membranes based on poly-(l-lacticacid) (PLLA) and poly-(vinylidene fluoride-co-hexafluoropropylene)P-(VDF-HFP) has been studied based on its relevance for the applicationof those separator membranes in lithium-ion batteries. The membraneshave been produced through solvent casting and characterized withrespect to the swelling ratio originated by the uptake of the organicsolvent. The organic solvent uptake affects the porous microstructureand crystalline phase of both membrane types. The organic solventuptake amount affects the crystal size of the membranes as a consequenceof the interaction between the solvent and the polymer, since thepresence of the solvent modifies the melting process of the polymercrystals due to a freezing temperature depression effect. It is alsoshown that the organic solvent partially penetrates into the amorphousphase of the polymer, leading to a mechanical plasticizing effect.Thus, the interaction between the organic solvent and the porous membraneis essential to properly tailor membrane properties, which in turnwill affect lithium-ion battery performance., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, UID/EEA/04436/2020, and UID/QUI/0686/2020 and under projects, MIT-EXPL/TDI/0033/2021, 2022.03931.PTDC, and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under grant 2021.08158.BD (J.P.S.), and FCT investigator contracts 2020.02915.CEECIND (D.M.C.) and 2020.04028.CEECIND (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next GenerationEU (PRTR-C17.I1) and by the Basque Government under the IKUR and Elkartek programs. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU). The work of the Spanish teams was funded by MCIN/AEI/10.13039/501100011033 Grants PID2019-106099RB-C41 and -C43. CIBER de Bioingenieria, Biomateriales y Nanomedicina is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the Universitat Polite`cnica de Vale`ncia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isothermal crystallization of poly(vinylidene fluoride) blended with the ionic liquid [Emim]2[Co(SCN)4]: Simultaneous analysis of crystalline phases by infrared spectroscopy and differential scanning calorimetry

  • Martins, Luis A.
  • Gomez Ribelles, Jose Luis
  • Costa, Carlos M.
  • Correia, Daniela M.
  • Lanceros-Méndez, Senentxu
  • Krakowsky, Ivan
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
[EN] The combination of poly (vinylidene fluoride) (PVDF) with ionic liquids (ILs) is increasingly being studied for the development of smart materials. Together with the functional response provided by the IL, its incorporation into PVDF allows to nucleate specific electroactive phases of the polymer, depending on the processing conditions. Thus, the isothermal crystallization of PVDF incorporating different contents of the magnetic ionic liquid bis(1ethyl-3-methylimidazolium) tetrathiocyanatocobaltate ([Emim]2 [Co(SCN)4]) is reported in this work. Morphological properties of the films were obtained by field emission scanning electronic microscopy (FESEM), and particularly, for the higher contents of IL, segregation was observed through artifacts present on the film surface. This fact has been further confirmed by energy-dispersive x-ray spectroscopy (EDX). The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been analyzed by Fourier transform infrared (FTIR) spectroscopy. Although alpha, beta and gamma crystalline phases were present in all samples, their relative percentages varied greatly with the amount of IL present, demonstrating that [Emim]2 [Co(SCN)4] is a strong inductor of the electroactive (EA) phases of PVDF. By evaluating both FTIR and DSC data, this effect has been ascribed to the higher melting temperatures of the EA structures whose formation is favored at higher crystallization temperatures. The melting temperature (Tm) of the beta phase is higher than that of the alpha phase, whereas Tm for the gamma phase is higher than for alpha and beta phases. Thus, together with the specific functional properties provided by the IL, such as magnetic response and ionic conductivity, the addition of [Emim]2 [Co(SCN)4] strongly influences PVDF's crystallization kinetics, proving to be a simple and very effective way to nucleate specific phases of PVDF, according also to the specific processing conditions., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial Support under the framework of Strategic Funding UID/FIS/04650/2020, and UID/QUI/0686/2020 and under projects 10.54499/2022.03931. PTDC, 2022.05932. PTDC and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under FCT investigator contracts 2020.02915. CEECIND (D.M. C) , and 10.54499/2020.04028. CEECIND/CP1600/CT0018 (C.M.C.) . The authors thank the Basque Government Education and Industry departments for funding under the IKUR and Elkartek programs, respectively. The work of the Spanish group has been funded by the Universitat Politecnica de Valencia though the "Aid to First Research Projects (PAID-06-22), Vice-rectorate of Research of the Universitat Politecnica de Valencia (UPV)", and by the Generalitat Valenciana (GVA) through a grant for stays of Doctorate academic and research staff in research centers located outside the Valencian Community convened by Resolution of October 6, 2022, of the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (DOGV num. 9449/September 14, 2021) . This research was supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fabrication of high-performance electroactive poly(vinylidene fluoride)/ magnetic nanoparticle composites via mechanical compression for deformation sensing sensor

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Pereira, Nelson
  • Mendes-Felipe, Cristian
  • Costa, Carlos Miguel
  • Lanceros-Mendez, Senentxu
[EN] Poly(vinylidene fluoride) (PVDF) has applicability in several areas, from sensors and actuators to energy generation and storage, mainly based on its excellent electroactive properties: piezo-, pyro- and ferroelectricity. In particular, a highly polar and electroactive beta-phase, which is produced through low-temperature solvent evaporation, can be further tuned by the addition of magnetic particles, allowing magnetic and magnetoelectric response. PVDF membranes with two different magnetic particles, cobalt ferrite (CFO) and iron magnetite nanoparticles (FE) were prepared by non-solvent induced phase separation (NIPS) with a particle content of 10 wt% and post-processed by mechanical pressing to obtain a compact morphology. The effect of mechanical compression regarding the morphology, crystalline phase content, electroactive beta-phase content, thermal properties and piezoelectric response of both types of composites were assessed. Mechanical compression results in a compacted structure with decreased porosity, increased beta phase content and piezoelectric constant, with decreased overall crystallinity. To prove the material's functional applicability, a highly responsive deformation sensor was developed based on the CFO composite, proving that this straightforward processing technique is appropriate for producing electroactive PVDF samples on a large scale for applications in the electronic industry., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/04650/2025 and project 10.54499/2022.03931.PTDC. The authors also thank the FCT for financial support under FCT investigator contract 2020.04028.CEECIND (DOI: 10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.) . This research was funded by project BIO-IMP_ACE_MAS_6_E, co-funded by the European Union through the Interreg VI-A Spain-Portugal Programme (POCTEP) 2021-2027. LAM, SLM and JLGR acknowledges support by PID2022-138572OB-C41 and C42 projects funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors thank the Basque Government Industry Departments for funding under the Elkartek program. This research was supported by CIBER -Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/1026) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for helping with FESEM characterization.