Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO2 separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications., This research acknowledges grant TED2021-130621B-C41 by Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN) and the European Union-NextGeneration EU. Also, grants PID2019-104009RB-I00 and PID2022-138582OB-I00, funded by AEI-MCIN, Spain, are acknowledged. In addition, financial support from the Aragón Government (T68_23R and M. P.-M. PhD grant) is thanked. M. Yahia acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the María Zambrano programme. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes. A. Mayoral acknowledges the Spanish Ministry of Science through the Ramon y Cajal programme (RYC2018-024561-I) and to regional government of Aragon (DGA E13_23R). Authors acknowledge Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas, both at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasmall functionalized UiO-66 nanoparticle/polymer Pebax 1657 thin-film nanocomposite membranes for optimal CO2 separation

  • Martínez Orellana, Lidia
  • García-Comas, Cristina
  • Dai, Shan
  • Navarro, Marta
  • Tissot, Antoine
  • Serre, Christian
  • Téllez, Carlos
  • Coronas, Joaquín
Ultrasmall 4 to 6 nm nanoparticles of the metal-organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (-NH2) and nitro (-NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Also, this research acknowledges (TED2021-130621B-C41) grant supported by the European Union-NextGenerationEU, Ministerio de Ciencia e Innovación/MCIN, and the Spanish Agencia Estatal de Investigación/AEI. Grant T68-23R financed by the Aragón Government is gratefully acknowledged. L.M.-I. also thanks the Aragón Government (DGA) for her PhD grant. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación (SAI) and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative starch-PVA membranes incorporating amino-functionalized Zeolitic Imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Amenakpor, Jacking
  • Coronas, Joaquín
  • Zornoza, Beatriz
The growing need for efficient CO2 separation in natural gas purification and carbon capture has driven the advancement of high-performance membrane technologies. This study incorporates the zeolitic imidazolate framework ZIF-8-NH2 into blends of polysaccharide starch and polyvinyl alcohol (PVA) to fabricate eco-friendly membranes. These materials, prepared as dense mixed matrix membranes (MMMs) and thin-film nanocomposite (TFN) membranes, offer a sustainable solution for CO2/CH4 separation. The integration of ZIF-8-NH2 nanoparticles, recognized for their high crystallinity and surface area and selective adsorption capacity into the starch–PVA matrix (33/67 blend ratio), significantly enhances CO2 permeability, increasing from 124 to 188 Barrer at 10 wt% loading, while preserving high CO2/CH4 selectivity (14.1 for the pristine blend and 16.5 for the MMM). For TFNs, a 9/91 starch-PVA matrix with 15 wt% ZIF-8-NH2 incorporated into the selective layer resulted in the best conditions. This architecture provided robust mechanical stability and high separation performance, yielding a CO2 permeance of up to 208 GPU and a CO2/CH4 selectivity of 26.9 at 3 bar feed pressure, nearly doubling the selectivity compared to the dense biopolymer blend. This work highlights the potential of renewable, starch-based materials in membrane-based gas separation, contributing to sustainable solutions for natural gas purification and carbon capture., B. Zornoza acknowledges the grant RYC2022-038139-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. This work was supported by grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033 and the European Union-Next Generation EU), and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial assistance was also provided by the Government of Aragon (T68_23R). The authors would like to thank the Universidad de Zaragoza for the use of “Servicio General de Apoyo a la Investigación-SAI” and the use of instrumentation as well as the technical support and access to the National Facility ELECMI ICTS, “Laboratorio de Microscopias Avanzadas”, at the “Universidad de Zaragoza”. Finally, J. Amenakpor thanks the European Commission - Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Master in Membrane Engineering for Sustainable Development, MESD, Project number: 101081874, Call: ERASMUS-EDU-2022-PEX-EMJM-MOB., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shaping hierarchical porosity beads from metal–organic framework powders using freeze spherification

  • Quindimil, Adrián
  • Fernández de Luis, Roberto
  • Wuttke, Stefan
  • Gurauskis, Jonas
Microporous powdered Metal-Organic Frameworks (MOFs) shaped by conventional mechanical densification methods (e.g., pelletization, granulation) present internal diffusion limitations and pressure drops that limit their technological leap to industrial applications. Therefore, the ongoing search for novel shaping methods that could manufacture controlled hierarchical porous structures with enhanced diffusion, high surface area, crystallinity, and mechanical robustness is needed. In this work, a freeze spherification method is developed to shape MOF-808 powder into spherical beads with hierarchical micro/macro porosity. The optimum spherical bead composition, in terms of suspension solids loading (10, 20, or 30 vol %) and hydroxypropyl methylcellulose (HPMC) binder content (30, 25, and 20 wt %), is determined by considering the bulk density, MOF surface accessibility, and the formation of a highly permeable porous structure in the final beads. The MOF-808 in powder and spherical bead forms is characterized by PXRD, IR, TGA, SEM, N2 physisorption, and mercury porosimetry. The analyses confirm the formation of hierarchically ordered porosity with varying pore sizes, morphologies, and MOF coating degrees, which depend on both suspension solids loading and binder content. The combination of MOF-808 with the HPMC binder does not affect its crystallinity, but a reduction of the binder content of 30 vol % beads from 30 to 25 wt % is key to retain 86% of the MOF-808 surface area . Noteworthy, the beads processed under optimum conditions exhibit sufficient mechanical integrity and superior accessibility, highlighting freeze spherification as a promising shaping method to bring powdered MOF-based catalysts and adsorbents to real-world applications., The authors acknowledge the financial support of the European Union–Next Generation EU and the Ministerio de Ciencia e Innovación (Spain) through the coordinated action “GreenLiFTech” in the framework of the subprojects N-GasCat (TED2021-130621B–C41) and ENZYMOF (TED2021-130621B–C42). The authors also acknowledge the technical support and instrumentation provided by “ELECMI ICTS Laboratorio de Microscopías Avanzadas (LMA)” and “Servicio General de Apoyo a la Investigación (SAI)” of the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed matrix membranes of PIM-1 incorporating MOF-808 functionalized with amino acids for enhanced CO2/CH4separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Martínez-Hernández, Harol David
  • Jimenez-Ruiz, Monica
  • Galván, Vanessa
  • Petrenko, Viktor
  • Fernández de Luis, Roberto
  • Coronas, Joaquín
This study investigates the enhancement of CO2/CH4 separation performance in mixed matrix membranes (MMMs) by incorporating amino acid-functionalized MOF-808 (MOF-808@AA; AA = Lys, Arg and Cys) into a polymer of intrinsic microporosity (PIM-1) matrix. MMMs containing 10 wt% MOF-808@AA were fabricated via solution casting. The structural and physicochemical properties of PIM-1, MOF-808@AA, and the resulting MMMs were characterized using 1H-NMR, FTIR, TGA, SEM, XRD, SAXS, N2/77 K and CO2/15 °C isotherms, and high-pressure CO2 adsorption. Collectively, the characterization results confirm the successful incorporation of MOF-808@AA into the PIM-1 membranes, with no detectable alteration of the nanostructure of the PIM-1 matrix. Gas separation measurements revealed a notable increase in both CO2 permeability and CO2/CH4 selectivity upon incorporation of MOF-808@AA fillers. Among the tested membranes, the PIM-1/MOF-808@Lys MMM functionalized with lysine exhibited the best performance, achieving a CO2 permeability of 14 354 ± 201 Barrer and a CO2/CH4 selectivity of 26.4 ± 1.8. Aging effects were also studied, showing a reduction in CO2 permeability accompanied by a slight increase in selectivity over time. In addition, the single and mixed gas experiments at elevated pressures (up to 6 bar) showed that CO2 permeability under mixed gas conditions was slightly higher than in single gas experiments, supporting the potential of these MMMs for application in realistic CO2/CH4 separation processes under practical operating conditions. Inelastic neutron scattering (INS) and density functional theory (DFT) calculations confirmed that CO2 molecules preferentially interact with the amino groups introduced by AA functionalization. DFT simulations further revealed that while CO2 and CH4 access similar adsorption sites, the interaction energy of CO2 with amino groups is approximately three times higher than that of CH4. These findings demonstrate that MOF-808@AA fillers can significantly enhance the CO2-philicity of PIM-1-based MMMs, offering a promising approach for efficient CO2/CH4 separation compared to pristine PIM-1 or unmodified PIM-1/MOF-808 composites., This investigation received financial support through multiple funding sources: MCIN/AEI/10.13039/501100011033 and ERDF (“A way of making Europe”) provided support via grants PID2022-138582OB-I00 and PID2021-122940OB-C31; the European Union's NextGenerationEU program and MCIN/AEI/10.13039/501100011033 jointly funded TED2021-130621B-C4; and MICIU/AEI/10.13039/501100011033 supported CEX2023-001286-S. Researcher M. Yahia was supported through the María Zambrano fellowship program, financed by both the European Union's NextGenerationEU initiative and Spain's Ministerio de Universidades. Additional financial backing came from the Government of Aragón (T68_23R). The research team expresses sincere appreciation for the technical resources and instrumentation made available by Universidad de Zaragoza, particularly through the ELECMI ICTS Laboratorio de Microscopías Avanzadas national research facility and the Servicio General de Apoyo a la Investigación-SAI. H. D. Martinez-Hernandez acknowledges the Institute Laue-Langevin and the Spanish MCIN for his PhD/CFR contract (Reference: ESP-2-2023)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol–gel-free electrospinning of α-Al2O3 suspensions: A systematic study on processing commercial powders into ceramic fibers

  • Fuentes-García, J. A.
  • Gurauskis, Jonas
This study optimizes the fabrication of electrospun α-Al2O3 ceramic fibers from commercial powders, focusing on the synergy between solid loading (α-Al2O3 solid oxide), solvent systems (water/alcohol), and surfactant (PVP) molecular weight (K15 and K30) for suspension elaboration. Rheological characterization identified a highly suitable processing window with consistency indices (K) of 3.85–4.85 Pa·s and pseudoplastic flow (n) ranging from 0.927–0.972 for the elaborated suspensions. The dominant viscoelastic liquid character (G’> G”), high electrical conductivity (up to 1825 μS/cm), and reduced surface tension (58–64 mN/m) facilitated stable Taylor cone formation and enhanced jet thinning. A breakthrough was achieved by increasing solid loading and transitioning to high-molecular-weight PVP K-30. This strategy, coupled with isopropanol-based solvents, provided steric stabilization and structural recovery necessary to maintain single-fiber integrity during both spinning and sintering at 1500 °C. The resulting fibers exhibited high micrometric uniformity and morphological retention despite the formation of intermediate aluminum oxycarbides. This research demonstrates a robust, cost-effective, and scalable route for designing advanced ceramic scaffolds directly from industrial precursors., This work has received funding from the European Union’s Horizon Europe Climate, Energy and Mobility (CL5) Project 101236115-C2FUe-LS, EIC Pathfinder Open program under Grant Agreement No.101099528 (BMRex). This work wasalso supported by the UK Research and Innovation (UKRI) agency under Grant Agreement No. 10062709. This research was further supported by the European Union−Next Generation EU and the Ministerio de Ciencia e Innovación (Spain) via the coordinated action “GreenLiFTech” in the framework of the subproject N-GasCat (TED2021−130621B−C41)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrasmall Functionalized UiO-66 Nanoparticle/Polymer Pebax 1657 Thin-Film Nanocomposite Membranes for Optimal CO2 Separation

  • Martínez-Izquierdo, Lidia
  • García-Comas, Cristina
  • Dai, Shan
  • Navarro, Marta
  • Tissot, Antoine
  • Serre, Christian
  • Téllez, Carlos
  • Coronas, Joaquín
Ultrasmall 4 to 6 nm nanoparticles of the metal–organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (−NH2) and nitro (−NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

  • Yahia, Mohamed
  • Lozano, Luis A.
  • Zamaro, Juan M.
  • Téllez, Carlos
  • Coronas, Joaquín
This study presents a sustainable microwave-assisted synthesis, based on the use of acetone and a water/acetic acid mixture instead of typical harmful DMF, to fabricate Zr-metal–organic frameworks (MOFs) UiO-66 and MOF-808 as fillers in a PIM-1 matrix for gas separation application. The mixed matrix membranes (MMMs) were prepared with varying loadings (2.5–10 wt%) of MOFs. The physicochemical properties (1H NMR, FTIR, XRD, N2 adsorption, TGA and SEM) of the resulting PIM-1, MOFs and MMMs were analyzed. The CO2/CH4 separation performance and membrane aging characteristics of the MMMs were evaluated. The incorporation of MOF fillers significantly improved CO2 permeability and CO2/CH4 selectivity, attributed to their CO2-philicity and narrow pore size (UiO-66 ≈ 0.6 nm and MOF-808 ≈ 1.8 nm). The MMMs with higher filler loadings (7.5 and 10 wt%) exhibited the most favorable separation performance. Due to the better crystallinity and textural properties, MOF-808 produced the best separation results at 10 wt% filler loading (a CO2/CH4 separation selectivity of 16.2 at 9090 Barrer of CO2 permeability). Aging led to a decrease in CO2 permeability but a slight increase in CO2/CH4 selectivity for all MMMs. Overall, the study highlights the potential of PIM-1/UiO-66 and PIM-1/MOF-808 MMMs as efficient materials for (CO2/CH4) separation comparing with the pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO<sub>2</sub> separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes based on renewable polymer Pebax® and zeolitic imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Coronas, Joaquín
This study investigates the impact of integrating Pebax® Rnew® 30R51, a sustainable elastomer-type copolymer material, with zeolitic imidazolate frameworks (ZIFs) to develop advanced membranes for CO2/CH4 gas separation. The fabrication process of ZIF/Pebax® Rnew® 30R51 thin films was optimized to achieve uniform and defect-free thin film composite (TFC) membranes. Crucial membrane properties, including permeability, selectivity and separation efficiency, were analyzed with variations in ZIF type, loading levels, film thickness and operating conditions. Additionally, the resulting TFC and ZIF/Pebax® Rnew® 30R51 thin film nanocomposite (TFN) membranes were subjected to characterization via FTIR, XRD, TGA and SEM to evaluate their physicochemical properties. Nanoparticles of ZIF-8, NH2-ZIF-8 and ZIF-94 were individually added (at 5–15 wt% loadings) to the Pebax® Rnew® 30R51 matrix to develop the CO2 separation efficiency. The pristine TFC membrane showed a 66 GPU CO2 permeance and a 37.5 CO2/CH4 separation selectivity, primarily due to improved CO2 mass transport. Upon inclusion of ZIFs, the CO2 permeance with 5 wt% loadings of ZIF-8, NH2-ZIF-8 and ZIF-94 increased to 148, 99 and 125 GPU, respectively, despite this, the CO2/CH4 separation selectivity maintained at 29.4, 37.0 and 27.0, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

How Can the Filler-Polymer Interaction in Mixed Matrix Membranes Be Enhanced?

  • Hasan, Md. Rafiul
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler‐polymer interaction to avoid non‐selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side‐chain modification and post‐synthetic modification of filler.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Shaping Hierarchical Porosity Beads from Metal–Organic Framework Powders Using Freeze Spherification

  • Quindimil, Adrián
  • Fernández de Luis, Roberto
  • Wuttke, Stefan
  • Gurauskis, Jonas
Microporous powdered Metal–Organic Frameworks (MOFs) shaped by conventional mechanical densification methods (e.g., pelletization, granulation) present internal diffusion limitations and pressure drops that limit their technological leap to industrial applications. Therefore, the ongoing search for novel shaping methods that could manufacture controlled hierarchical porous structures with enhanced diffusion, high surface area, crystallinity, and mechanical robustness is needed. In this work, a freeze spherification method is developed to shape MOF-808 powder into spherical beads with hierarchical micro/macro porosity. The optimum spherical bead composition, in terms of suspension solids loading (10, 20, or 30 vol %) and hydroxypropyl methylcellulose (HPMC) binder content (30, 25, and 20 wt %), is determined by considering the bulk density, MOF surface accessibility, and the formation of a highly permeable porous structure in the final beads. The MOF-808 in powder and spherical bead forms is characterized by PXRD, IR, TGA, SEM, N2 physisorption, and mercury porosimetry. The analyses confirm the formation of hierarchically ordered porosity with varying pore sizes, morphologies, and MOF coating degrees, which depend on both suspension solids loading and binder content. The combination of MOF-808 with the HPMC binder does not affect its crystallinity, but a reduction of the binder content of 30 vol % beads from 30 to 25 wt % is key to retain 86% of the MOF-808 surface area . Noteworthy, the beads processed under optimum conditions exhibit sufficient mechanical integrity and superior accessibility, highlighting freeze spherification as a promising shaping method to bring powdered MOF-based catalysts and adsorbents to real-world applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sol–Gel-Free Electrospinning of α-Al <sub>2</sub> O <sub>3</sub> Suspensions: A Systematic Study on Processing Commercial Powders into Ceramic Fibers

  • Fuentes-García, Jesús Antonio
  • Gurauskis, Jonas
This study optimizes the fabrication of electrospun α-Al2O3 ceramic fibers from commercial powders, focusing on the synergy between solid loading (α-Al2O3 solid oxide), solvent systems (water/alcohol), and surfactant (PVP) molecular weight (K15 and K30) for suspension elaboration. Rheological characterization identified a highly suitable processing window with consistency indices (K) of 3.85–4.85 Pa·s and pseudoplastic flow (n) ranging from 0.927–0.972 for the elaborated suspensions. The dominant viscoelastic liquid character (G’> G”), high electrical conductivity (up to 1825 μS/cm), and reduced surface tension (58–64 mN/m) facilitated stable Taylor cone formation and enhanced jet thinning. A breakthrough was achieved by increasing solid loading and transitioning to high-molecular-weight PVP K-30. This strategy, coupled with isopropanol-based solvents, provided steric stabilization and structural recovery necessary to maintain single-fiber integrity during both spinning and sintering at 1500 °C. The resulting fibers exhibited high micrometric uniformity and morphological retention despite the formation of intermediate aluminum oxycarbides. This research demonstrates a robust, cost-effective, and scalable route for designing advanced ceramic scaffolds directly from industrial precursors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rheological design and characterization of Al2O3-based pastes for the direct ink writing of CFD-optimized woodpile scaffolds

  • Amonte Lopez, Cecilia
  • Fuentes-García, Jesús Antonio
  • Quindimil, Adrián
  • Gurauskis, Jonas
This study presents a strategy for the design and fabrication framework of Direct Ink Writing (DIW) manufactured Al2O3-based scaffolds, integrating computational fluid dynamics (CFD) and experimental rheological optimization. First, CFD simulations were performed under gas flow conditions to evaluate the impact of internal geometry on the permeability, pressure drop, unit mass flow and outward mass flow rate, comparing Woodpile (WP) architectures with 90° and 45° strut orientations. The WP90 configuration promotes high mass flow, evidenced by a lower pressure drop. While the WP45 configuration created a more intricate fluid pathway, maximizing gas-scaffold interactions at the cost of higher flow resistance. Once the 3D structure was studied, the rheological behaviour of the multicomponent paste comprising PVP, hydroxypropyl cellulose, Darvan, and graphite for DIW was experimentally optimized to achieve the high-viscosity and shear-thinning properties required for the WP structures printability. The effects of solid loading (44-48 vol% vs. 57-61 vol%) and particle morphology in aqueous Al2O3-YSZ and Al2O3-Sepiolite pastes were investigated. Crucially, the study elucidates a system-dependent interaction mechanism where the graphite pore former acts as a reinforcing agent in granular Al2O3-YSZ pastes but functions as a lubricant in fibrous Al2O3-Sepiolite networks. This sequential approach ensures that the scaffold's performance is optimized at the design stage while maintaining high structural fidelity during the extrusion process.