Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juárez-Pérez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes., E. J. J.-P. and M. H. acknowledge the funding support from MCIN/AEI/10.13039/501100011033 for the project grant PID2022-140516OB-I00, E. J. J.-P. for the project grant PID2019-107893RB-I00, and M. H. for CNS2023-145197, PID2019-108247RA-I00, and her Ramón y Cajal fellowship (RYC-2018-025222-I). M. H, I. C.-R and E. J. J-P acknowledge the Diputación General de Aragón for projects E31_23R (M. H and I. C.-R.) and T57_23R (E. J. J.-P.). A. M. acknowledges the Spanish ministry of Science and Universities (RYC2018-024561-I, CNS2023-144346), and the Gobierno de Aragón (Nanomidas group, E13_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress in integrated photo-rechargeable battery technologies

  • Abellán, Manuel
  • Ciria-Ramos, Isabel
  • Gascón, Ignacio
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
Integrated photo-rechargeable battery systems represent a significant advancement in sustainable energy storage and conversion by combining photovoltaic energy harvesting with direct energy storage in a compact design. Although initially studied in the 1970s, interest in this field has surged in recent years. Due to the multidisciplinary nature of this topic, researchers from diverse backgrounds approach it with varying methodologies, resulting in highly diverse cell designs and inconsistent performance metrics. These variations complicate the comparison and evaluation of system efficiency and functionality. This review presents a comprehensive overview of the field's development and current state, from early photoelectrochemical approaches to modern integrated designs. Additionally, it addresses the challenge of performance evaluation by compiling current approaches to performance measurement and proposing standardized evaluation parameters under defined conditions. This dual focus on field overview and metrics standardization aims to provide both a thorough understanding of solar electrochemical energy storage technologies and a framework for their consistent evaluation, which is critical for advancing these technologies., The authors acknowlege the project PID2022-140516OB-I00 funded by MICIU/AEI 10.13039/501100011033 and FEDER, EU. M. H. also acknowledges the project CNS2023-145197 funded by MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRT., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrochemical performance of M(dca)2pyz (M = Fe, Co and Ni) MOFs as sustainable anodes in lithium-ion batteries

  • Ciria-Ramos, Isabel
  • García-Fernández, Alberto
  • Mayoral, Álvaro
  • Orera, Alodia
  • Juarez-Perez, Emilio J.
  • Haro, Marta
A family of Metal–Organic Frameworks (MOFs) based on the ligands pyrazine (pyz) and dicyanamide (dca) and the metal centers Fe, Co and Ni with the unit formula M(dca)2pyz has been studied as anodes for Li-Ion Batteries (LIBs). These compounds are analogs of transition metal nitrides (TMNs) but synthesized following an environmentally friendly process. Fe(dca)2pyz provides the best electrochemical performance with a specific capacity of 519 mA h g−1 and 375 mA h cm−3 after 450 cycles at 200 mA g−1 and a capacity retention of 90% with respect to the first cycle. This performance is better than most of the Fe nitrides reported to date, highlighting its potential as an anode for LIBs. The high capacity is due to the conversion and displacement reaction occurring with the Fe atoms and the insertion of Li+ into the ligands. In contrast, the specific capacities of Co(dca)2pyz and Ni(dca)2pyz are lower due to a partial reduction of the Co atoms in the first case, and to the oxidation of the Ni atoms which hinders the Li+ intercalation process in the second. As a result, the specific capacities after 450 cycles at 200 mA g−1 are 148 mA h g−1 for Co(dca)2pyz and 57 mA h g−1 for Ni(dca)2pyz. Powder-XRD and TEM characterizations after cycling of the three samples reveal that Fe(dca)2pyz and Co(dca)2pyz samples become amorphous while the Ni(dca)2pyz material does not. This suggests that the amorphization process is relevant for obtaining anodes with improved electrochemical performance. This study demonstrates that MOFs obtained by a cost-effective and environmentally friendly method can act as precursors for obtaining high performance anodes for LIBs without the need for an energy intensive carbonization process, since they undergo an in situ amorphization process, giving rise to AMorphous Organometallic (AMO) electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Progress in integrated photo-rechargeable battery technologies

  • Abellán, Manuel
  • Ciria-Ramos, Isabel
  • Gascón, Ignacio
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Integrated photo-rechargeable battery systems represent a significant advancement in sustainable energy storage and conversion by combining photovoltaic energy harvesting with direct energy storage in a compact design. Although initially studied in the 1970s, interest in this field has surged in recent years. Due to the multidisciplinary nature of this topic, researchers from diverse backgrounds approach it with varying methodologies, resulting in highly diverse cell designs and inconsistent performance metrics. These variations complicate the comparison and evaluation of system efficiency and functionality. This review presents a comprehensive overview of the field's development and current state, from early photoelectrochemical approaches to modern integrated designs. Additionally, it addresses the challenge of performance evaluation by compiling current approaches to performance measurement and proposing standardized evaluation parameters under defined conditions. This dual focus on field overview and metrics standardization aims to provide both a thorough understanding of solar electrochemical energy storage technologies and a framework for their consistent evaluation, which is critical for advancing these technologies.