Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 904
Encontrada(s) 10 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-surface synthesis of porous graphene nanoribbons mediated by phenyl migration

  • Moreno, Cesar|||0000-0003-2682-211X
  • Diaz de Cerio, Xabier|||0000-0002-2389-1905
  • Tenorio Tuñas, Maria|||0000-0002-0632-1636
  • Gao, Fei
  • Vilas-Varela, Manuel|||0000-0002-6768-5441
  • Sarasola, Ane
  • Peña, Diego|||0000-0003-3814-589X
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Mugarza, Aitor|||0000-0002-2698-885X
Advancements in the on-surface synthesis of atomically precise graphene nanostructures are propelled by the introduction of innovative precursor designs and reaction types. Until now, the latter has been confined to cross-coupling and cyclization reactions that involve the cleavage of specific atoms or groups. In this article, we elucidate how the migration of phenyl substituents attached to graphene nanoribbons can be harnessed to generate arrays of [18]-annulene pores at the edges of the nanostructures. This sequential pathway is revealed through a comprehensive study employing bond-resolved scanning tunneling microscopy and ab-initio computational techniques. The yield of pore formation is maximized by anchoring the graphene nanoribbons at steps of vicinal surfaces, underscoring the potential of these substrates to guide reaction paths. Our study introduces a new reaction to the on-surface synthesis toolbox along with a sequential route, altogether enabling the extension of this strategy towards the formation of other porous nanostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A high voltage solid state symmetric supercapacitor based on graphene-polyoxometalate hybrid electrodes with a hydroquinone doped hybrid gel-electrolyte

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Suarez-Guevara, Jullieth|||0000-0003-4570-7125
  • Tonti, Dino|||0000-0003-0240-1011
  • Enciso, Eduardo|||0000-0002-5536-2864
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
In pursuit of high capacitance and high energy density storage devices, hybrid materials have quickly garnered well-deserved attention based on their power to merge complementary components and properties. Here, we report the fabrication of all-solid state symmetric supercapacitors (ASSSC) based on a double hybrid approach combining a hybrid electrode (reduced graphene oxide-phoshomolybdate, rGO-PMo) and a hybrid electrolyte (hydroquinone doped gel-electrolyte). To begin with, a high-performance hybrid electrode based on HPMoO nanodots anchored onto rGO was prepared (rGO-PMo). Later, an all-solid state symmetric cell based on these rGO-PMo electrodes, and making use of a polymer gel-electrolyte was assembled. This symmetric cell showed a significant improvement in cell performance. Indeed, it allowed for an extended potential window by 0.3 V that led to an energy density of 1.07 mW h cm. Finally, we combined these hybrid electrodes with a hybrid electrolyte incorporating an electroactive species. This is the first proof-of-design where a redox-active solid-state gel-electrolyte is applied to rGO-PMo hybrid supercapacitors to accomplish a significant enhancement in the capacitance. Strikingly, a further excellent increase in the device performance (energy density of 1.7 mW h cm) was realized with the hybrid electrode-hybrid electrolyte combination cell as compared to that of the conventional electrolyte cell. Thus, this unique symmetric device outclasses the high-voltage asymmetric counterparts under the same power and represents a noteworthy advance towards high energy density supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Narrowing the Zero-Field Tunneling Resonance by Decreasing the Crystal Symmetry of Mn12 Acetate

  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Juanhuix, Judith|||0000-0003-3728-8215
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Imaz, Inhar|||0000-0002-0278-1141
  • Chudnovsky, Eugene|||0000-0002-1880-3966
  • Tejada, Javier|||0000-0001-9246-5566
  • Zarzuela, Ricardo|||0000-0003-1765-1697
  • Statuto, Nahuel|||0000-0002-0062-760X
We report the discovery of a less symmetric crystalline phase of Mn acetate, a triclinic phase, resulting from recrystallizing the original tetragonal phase reported by Lis in acetonitrile and toluene. This new phase exhibits the same structure of Mn acetate clusters and the same positions of tunneling resonances on the magnetic field as the conventional tetragonal phase. However, the width of the zero-field resonance is at least 1 order of magnitude smaller - can be as low as 50 Oe - indicating very small inhomogeneous broadening due to dipolar and nuclear fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering Homochiral Metal-Organic Frameworks by Spatially Separating 1D Chiral Metal-Peptide Ladders, Tuning the Pore Size for Enantioselective Adsorption

  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Gómez, Laura
  • Imaz, Inhar|||0000-0002-0278-1141
  • Verdugo-Escamilla, Cristóbal|||0000-0003-2345-8359
  • Ribas, Xavi|||0000-0002-2850-4409
  • Maspoch, Daniel|||0000-0003-1325-9161
The reaction of the chiral dipeptide glycyl-L(S)-glutamate with Co<sup.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Diamond-coated silicon nanowires for enhanced micro-supercapacitor with ionic liquids

  • Gund, Girish S.|||0000-0002-2301-6051
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Mueller-Sebert, Wolfgang
  • Bidan, Gérard
  • Gaboriau, D.
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Silicon nanowires (SiNWs) and diamond-coated SiNWs (D@SiNWs) on highly n-doped silicon wafer substrates were prepared through standard chemical vapor deposition (CVD) method as electrodes for micro-supercapacitors. The surface of electrodes exhibited uniform distribution of SiNWs on silicon wafer and continuous diamond coating on SiNWs. Electrochemical measurements were carried out in order to test the combined effect of using Ionic Liquid electrolytes and diamond coating on SiNWs on energy storage performance. Optimal values of areal capacitance, energy density and power densities were 317 μF cm, 0.13 μWh cm and 150 μW cm, respectively. So, the work reported here confirms the suitability and compatibility of D@SiNWs electrode materials and ionic liquid electrolytes for the fabrication of high-performing and robust micro-supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Healing damaged coatings using friction-sensitive hybrid microcapsules

  • García Jimeno, Sonia|||0000-0003-3821-2714
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Mejias, Nereida
  • Navarro Bañón, Mª Virtudes
  • Frances, A.B.
  • Maspoch, Daniel|||0000-0003-1325-9161
A new healing surface coating technology based on the incorporation of hybrid melamine-formaldehyde-polyurethane (MF/PU) microcapsules which contain a healing mixture, into standard polyurethane surface coatings, is described. Microcapsules release the healing mixture upon surface scratching after mechanical damage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lanthanide-organic framework nanothermometers prepared by spray-drying

  • Wang, Zhuopeng
  • Ananias, Duarte
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Brites, Carlos D. S.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Rocha, João
  • Carlos, Luís D.|||0000-0003-4747-6535
Accurate, noninvasive, and self-referenced temperature measurements at the submicrometer scale are of great interest, prompted by the ever-growing demands in the fields of nanotechnology and nanomedicine. The thermal dependence of the phosphor's luminescence provides high detection sensitivity and spatial resolution with short acquisition times in, e.g., biological fluids, strong electromagnetic fields, and fast-moving objects. Here, it is shown that nanoparticles of [(Tb0.914Eu0.086)2(PDA)3(H2O)]·2H2O (PDA = 1,4-phenylenediacetic acid), the first lanthanide-organic framework prepared by the spray-drying method, are excellent nanothermometers operating in the solid state in the 10-325 K range (quantum yield of 0.25 at 370 nm, at room temperature). Intriguingly, this system is the most sensitive cryogenic nanothermometer reported so far, combining high sensitivity (up to 5.96 ± 0.04% K-1 at 25 K), reproducibility (in excess of 99%), and low-temperature uncertainty (0.02 K at 25 K).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of texture in hybrid carbon-phosphomolybdic acid materials on their performance as electrodes in supercapacitors

  • Palomino, Pablo
  • Suarez-Guevara, Jullieth|||0000-0003-4570-7125
  • Olivares-Marín, Mara|||0000-0002-9797-7904
  • Ruiz Ruiz, Vanesa|||0000-0001-6657-2253
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Tonti, Dino|||0000-0003-0240-1011
  • Enciso, Eduardo|||0000-0002-5536-2864
In this paper, phosphomolybdic acid HPMoO (PMo) was anchored to four synthetic micro-mesoporous carbons and a commercial one to analyse the relationship between the porous texture of the support, the PMo adsorption and the performance of the resulting hybrid materials as electrodes in supercapacitors. The uptake of PMo on carbon supports follows a clear correlation with the micropore volume, which implies that PMo is mainly adsorbed in microporosity as a consequence of a greater confinement in this kind of pores instead of mesopores. Transmission electron microscopy indicates that the PMo adsorbed is homogeneously dispersed in the carbon texture. Finally, the addition of PMo to the original carbon electrodes provided capacitances up to 293 F per gram of electrode, substantially larger than the 206-240 F g of the unmodified activated carbon. This result represented an increase of up to 35% in terms of gravimetric energy density and 160% in terms of volumetric energy density, after PMo integration into the carbon matrix.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical modulation of coherent phonon emission in optomechanical cavities

  • Maire, Jeremie
  • Arregui, Guillermo
  • Capuj, Nestor E.
  • Colombano, Martín F.
  • Sotomayor-Torres, Clivia M.
  • Navarro-Urrios, Daniel
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical (OM) structures are well suited to study photon-phonon interactions, and they also turn out to be potential building blocks for phononic circuits and quantum computing. In phononic circuits, in which information is carried and processed by phonons, OM structures could be used as interfaces to photons and electrons thanks to their excellent coupling efficiency. Among the components required for phononic circuits, such structures could be used to create coherent phonon sources and detectors, but more complex functions remain challenging. Here, we propose and demonstrate a way to modulate the coherent phonon emission from OM crystals by a photothermal effect induced by an external laser, effectively creating a phonon switch working at ambient conditions of pressure and temperature and the working speed of which is only limited by the build-up time of the mechanical motion of the OM structure. We additionally demonstrate two other modulation schemes: modulation of harmonics in which the mechanical mode remains active but different harmonics of the optical force are used, and modulation to and from a chaotic regime. Furthermore, due to the local nature of the photothermal effect used here, we expect this method to allow us to selectively modulate the emission of any single cavity on a chip without affecting its surroundings in the absence of mechanical coupling between the structures, which is an important step toward freely controllable networks of OM phonon emitters. (c) 2018 Author(s)., This work was supported by the European Comission FET Open project PHENOMEN (No. H2020-EU-713450) and the Spanish MINECO project PHENTOM (No. FIS2015-70862-P). The ICN2 is funded by the CERCA programme, the Generalitat de Catalunya, and supported by the Severo Ochoa programme of the Spanish MINECO Grant No. SEV-2013-0295. D.N.U. and M.F.C. gratefully acknowledge the support of a Ramon y Cajal postdoctoral fellowship (No. RYC-2014-15392) and a Severo Ochoa studentship, respectively. The authors thank F. Alzina for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanocrystalline silicon optomechanical cavities

  • Navarro-Urrios, D.
  • Capuj, N.E.
  • Maire, J.
  • Colombano, M.F.
  • Jaramillo-Fernandez, J.
  • Chavez-Angel, E.
  • Martín-Rodríguez, Leopoldo Luis
  • Sotomayor-Torres, C.M.
  • Ahopelto, J.
  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Silicon on insulator photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, there are some constraints such as the high cost of the wafers and limitation to a single physical device level. In the present work we investigate nanocrystalline silicon as an alternative material for optomechanical devices. In particular we demonstrate that optomechanical crystal cavities fabricated of nanocrystalline silicon have optical and mechanical properties enabling non-linear dynamical behaviour and effects such as thermo-optic/free-carrier-dispersion self-pulsing, phonon lasing and chaos, all at low input laser power and with typical frequencies as high as 0.3 GHz. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Commission project PHENOMEN (H2020-EU-713450), MINECO Severo Ochoa Excellence program (SEV-2013-0295), MINECO (FIS2015-70862-P, RYC-2014-15392) and CERCA Programme/Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of hybrid materials based on sponge supported reduced graphene oxide and transition metal hydroxides for hybrid energy storage devices

  • Dubal, Deepak P.
  • Holze, Rudolf
  • Gómez-Romero, P.
This work is licensed under a Creative Commons Attribution 4.0 International License., Earnest efforts have been taken to design hybrid energy storage devices using hybrid electrodes based on capacitive (rGO) and pseudocapacitive (Ni(OH)2 and Co(OH)2) materials deposited on the skeleton of 3D macroporous (indicate sponge material) sponge support. Conducting framework was formed by coating rGO on macroporous sponge on which subsequent deposition of Ni(OH)2 and Co(OH)2 was carried out. The synergetic combination of rGO and Ni(OH)2 or Co(OH)2) provides dual charge-storing mechanisms whereas 3D framework of sponge allows excellent accessibility of electrolyte to hybrid electrodes. Moreover, to further increase the energy density, hybrid devices have been fabricated with SP@rGO@Ni or SP@rGO@Co and SP@rGO as positive and negative electrodes, respectively. These hybrid devices operate with extended operating voltage windows and achieve remarkable electrochemical supercapacitive properties which make them truly promising energy storage devices for commercial production., Authors appreciate the award to DPD of a Humboldt Fellowship of the Alexander von Humboldt Foundation (AvH), Germany and the award of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) for Catalan system of science and technology, Spain. Partial funding from Spanish Grant MAT2012-39199-C02-01 is gratefully acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic platform for environmental contaminants sensing and degradation based on boron-doped diamond electrodes

  • Medina-Sánchez, Mariana
  • Mayorga-Martínez, Carmen C.
  • Pino, Flavio
  • Merkoçi, Arben
We have developed a lab-on-a-chip (LOC) platform for electrochemical detection and degradation of the pesticide atrazine (Atz). It is based on boron-doped diamond (BDD) electrodes and a competitive magneto-enzyme immunoassay (EIA) that enables high sensitivity. To detect the enzymatic reaction, we employed a BDD electrode modified with platinum nanoparticles (PtNPs), as a highly conductive catalytic transducer. Chronoamperometry revealed a limit of detection (LOD) of 3.5 pM for atrazine, which, to the best of our knowledge, is one of the lowest value published to date. Finally, we degraded Atz in the same platform, using a bare BDD electrode that features remarkable corrosion stability, a wide potential window, and much higher O2 overvoltage as compared to conventional electrodes. These characteristics enable the electrode to produce a greater amount of HO• on the anode surface than do conventional electrodes and consequently, to destroy the pollutant more rapidly. Our new LOC platform might prove interesting as a smart system for detection and remediation of diverse pesticides and other contaminants., The authors acknowledge the support given by MICINN for the project Spain–Japan International Bilateral PIB2010JP-00278 and support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Engineered Ferromagnetism in LaMnO3 Thin Films

  • Roqueta, Jaume
  • Pomar, Alberto
  • Balcells Argemi, Lluis
  • Frontera, Carlos
  • Valencia, Sergio
  • Abrudan, Radu
  • Bozzo Closas, Bernat
  • Konstantinović, Z.
  • Santiso, José
  • Martínez Perea, Benjamín
A systematic study of the growth process of LaMnO3 (LMO) thin films, by pulsed laser deposition, on top of SrTiO3 substrates under different oxygen partial pressures (PO2) is reported. It is found that the accommodation of the orthorhombic LMO phase onto the cubic STO structure, i.e. the amount of structural strain, is controlled by background oxygen pressure. We demonstrate that magnetic behaviour can be continuously tuned from robust ferromagnetic (FM) ordering to an antiferromagnet. These results strongly point to a strain-induced selective orbital occupancy as the origin of the observed FM behaviour, in agreement with recent theoretical calculations., We acknowledge financial support from the Spanish MINECO (MAT2011-29081 and MAT2012-33207), CONSOLIDER (CSD2007-00041), and FEDER program. We thank P. García for his kind assistance during x-ray experiments. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant - SEV 2013-0295). ZK thanks the support from the Ministry of Education, Science, and Technological Development of Republic of Serbia through Project III45018., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-cost flexible supercapacitors with high-energy density based on nanostructured MnO2 and Fe2O3 thin films directly fabricated onto stainless steel

  • Gund, Girish S.
  • Dubal, Deepak P.
  • Chodankar, Nilesh R.
  • Cho, Jun Y.
  • Gómez-Romero, P.
  • Park, Chan
  • Lokhande, Chandrakant D.
This work is licensed under a Creative Commons Attribution 4.0 International License., The facile and economical electrochemical and successive ionic layer adsorption and reaction (SILAR) methods have been employed in order to prepare manganese oxide (MnO2) and iron oxide (Fe2O3) thin films, respectively with the fine optimized nanostructures on highly flexible stainless steel sheet. The symmetric and asymmetric flexible-solid-state supercapacitors (FSS-SCs) of nanostructured (nanosheets for MnO2 and nanoparticles for Fe2O3) electrodes with Na2SO4/Carboxymethyl cellulose (CMC) gel as a separator and electrolyte were assembled. MnO2 as positive and negative electrodes were used to fabricate symmetric SC, while the asymmetric SC was assembled by employing MnO2 as positive and Fe2O3 as negative electrode. Furthermore, the electrochemical features of symmetric and asymmetric SCs are systematically investigated. The results verify that the fabricated symmetric and asymmetric FSS-SCs present excellent reversibility (within the voltage window of 0–1V and 0–2V, respectively) and good cycling stability (83 and 91%, respectively for 3000 of CV cycles). Additionally, the asymmetric SC shows maximum specific capacitance of 92Fg−1, about 2-fold of higher energy density (41.8Wh kg−1) than symmetric SC and excellent mechanical flexibility. Furthermore, the “real-life” demonstration of fabricated SCs to the panel of SUK confirms that asymmetric SC has 2-fold higher energy density compare to symmetric SC., One of the authors GSG is thankful to DAE-BRNS, BARC Mumbai, India for the award of, “JRF”. Authors are also grateful to Department of Science and Technology (DST) for financial support through PURSE and FIST & University Grant Commission (UGC) India through DSA-I scheme. Authors are also thankful to UGC-DAE CSR, Indore centre for providing Raman facility. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid energy storage: the merging of battery and supercapacitor chemistries

  • Dubal, Deepak P.
  • Ayyad, Omar
  • Ruiz Ruiz, Vanesa
  • Gómez-Romero, P.
The hybrid approach allows for a reinforcing combination of properties of dissimilar components in synergic combinations. From hybrid materials to hybrid devices the approach offers opportunities to tackle much needed improvements in the performance of energy storage devices. This paper reviews the different approaches and scales of hybrids, materials, electrodes and devices striving to advance along the diagonal of Ragone plots, providing enhanced energy and power densities by combining battery and supercapacitor materials and storage mechanisms. Furthermore, some theoretical aspects are considered regarding the possible hybrid combinations and tactics for the fabrication of optimized final devices. All of it aiming at enhancing the electrochemical performance of energy storage systems., Partial funding from Spanish (Grant MAT2012-39199-C02-01) and Catalan administrations (NESTOR 2014-SGR-1505 project), and a postdoctoral contract (Beatriu de Pinos, Marie Curie) from Generalitat de Catalunya (Dr D. P. Dubal) are gratefully acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional arrays of 1D MnO2 nanocrystals for all-solid-state asymmetric supercapacitors

  • Dubal, Deepak P.
  • Holze, Rudolf
  • Gómez-Romero, P.
Reported is the synthesis of 3D hierarchical structures based on one-dimensional MnO2 nanobuilding blocks (nanorods, nanowires, and nanoneedles) by means of a facile and scalable coprecipitation method and their use as electrodes for the assembly of all-solid-state supercapacitors. Asymmetric devices were also assembled by using these nanostructured MnO2 materials as the positive electrode and reduced graphene oxide (rGO) as the negative electrode with a polymeric gel electrolyte. The asymmetric cells successfully extend the working voltage windows beyond 1.4 V and allowed for a maximum voltage of 1.8 V. An asymmetric device based on hierarchical nanoneedle-like MnO2 and rGO achieved a maximum specific capacitance of 99 F g−1 at a scan rate of 10 mV s−1 with a stable operational voltage of 1.8 V. This high value allowed for a large specific energy of 24.12 Wh kg−1., Funded by: Alexander von Humboldt Foundation;Beatriu de Pinos Program. Grant Number: BP-DGR-2013; Catalan System of Science and Technology and Spanish MINECO. Grant Number: SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic thin films on stepped surfaces: lateral scattering of quantum well states

  • Schiller, Frederik
  • Abd El-Fattah, Zakaria M.
  • Schirone, S.
  • Lobo-Checa, Jorge
  • Urdanpilleta, Marta
  • Ruiz-Osés, Miguel
  • Cordón, J.
  • Corso, Martina
  • Sánchez-Portal, Daniel
  • Mugarza, Aitor
  • Ortega, J. Enrique
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence., Quantum well states of Ag films grown on stepped Au(111) surfaces are shown to undergo lateral scattering, in analogy with surface states of vicinal Ag(111). Applying angle resolved photoemission spectroscopy we observe quantum well bands with zone-folding and gap openings driven by surface/interface step lattice scattering. Experiments performed on a curved Au(111) substrate allow us to determine a subtle terrace-size effect, i.e., a fine step-density-dependent upward shift of quantum well bands. This energy shift is explained as mainly due to the periodically stepped crystal potential offset at the interface side of the film. Finally, the surface state of the stepped Ag film is analyzed with both photoemission and scanning tunneling microscopy. We observe that the stepped film interface also affects the surface state energy, which exhibits a larger terrace-size effect compared to surface states of bulk vicinal Ag(111)crystals., This work was supported in part by the Spanish Ministry of Economy (MINECO) through grants MAT2013–46593-C6–2-P, MAT2013–46593-C6–4-P, MAT2013–46593-C6–5-P, and FIS2010–19609-C02–02, by the German Sonderforschungsbereich SFB 1083, and by the Basque Government through Projects IT-621–13 and IT-756–13. ICN2 acknowledges support from the Severo Orchoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering homochiral metal-organic frameworks by spatially separating 1D chiral metal-peptide ladders: tuning the pore size for enantioselective adsorption

  • Stylianou, Kyriakos C.
  • Gómez, Laura
  • Imaz, Inhar
  • Verdugo-Escamilla, Cristóbal
  • Ribas, Xavi
  • Maspoch, Daniel
The reaction of the chiral dipeptide glycyl-L(S)-glutamate with CoII ions produces chiral ladders that can be used as rigid 1D building units. Spatial separation of these building units with linkers of different lengths allows the engineering of homochiral porous MOFs with enhanced pore sizes, pore volumes, and surface areas. This strategy enables the synthesis of a family of isoreticular MOFs, in which the pore size dictates the enantioselective adsorption of chiral molecules (in terms of their size and enantiomeric excess)., This work was supported by the MINECO-Spain under the project PN MAT2012-30994. I.I. thanks the MINECO for the RyC fellowship and K.C.S. is grateful to EU for the Marie Curie Fellowship (300390 NanoBioMOFs FP7-PEOPLE-2011-IEF). The authors thank the Diamond Light Source for access to beamline I19, which contributed to the results presented herein (MT8477). X.R. thanks for an ICREA Acadèmia award. The project “Factoría de Cristalización, CONSOLIDER INGENIO-2010” provided PXRD facilities. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced magnetic properties in antiferromagnetic-core/ferrimagnetic-shell nanoparticles

  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Nogués, Josep
This work is licensed under a Creative Commons Attribution 4.0 International License., Bi-magnetic core/shell nanoparticles are gaining increasing interest due to their foreseen applications. Inverse antiferromagnetic(AFM)/ferrimagnetic(FiM) core/shell nanoparticles are particularly appealing since they may overcome some of the limitations of conventional FiM/AFM systems. However, virtually no simulations exist on this type of morphology. Here we present systematic Metropolis Monte Carlo simulations of the exchange bias properties of such nanoparticles. The coercivity, HC, and loop shift, Hex, present a non-monotonic dependence with the core diameter and the shell thickness, in excellent agreement with the available experimental data. Additionally, we demonstrate novel unconventional behavior in FiM/AFM particles. Namely, while HC and Hex decrease upon increasing FiM thickness for small AFM cores (as expected), they show the opposite trend for large cores. This presents a counterintuitive FiM size dependence for large AFM cores that is attributed to the competition between core and shell contributions, which expands over a wider range of core diameters leading to non-vanishing Hex even for very large cores. Moreover, the results also hint different possible ways to enhance the experimental performance of inverse core/shell nanoparticles for diverse applications., M.V. and K.N.T. acknowledge the financial support of the European Social Fund (EU) and the Greek National Operational Program ‘‘Education and Lifelong Learning’’ in the framework of ARISTEIA I (Project COMANA/22). J.N. acknowledges the support of the 2014-SGR-1015 project of the Generalitat de Catalunya and the MAT2010-20616-C02 and MAT2013-48628-R projects of the Spanish Ministerio de Economía y Competitividad (MINECO). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ production of biofunctionalized few-layer defect-free microsheets of graphene

  • Gravagnuolo, Alfredo M.
  • Morales-Narváez, Eden
  • Silva, Everson T. da
  • Merkoçi, Arben
Biological interfacing of graphene has become crucial to improve its biocompatibility, dispersability, and selectivity. However, biofunctionalization of graphene without yielding defects in its sp2-carbon lattice is a major challenge. Here, a process is set out for biofunctionalized defect-free graphene synthesis through the liquid phase ultrasonic exfoliation of raw graphitic material assisted by the self-assembling fungal hydrophobin Vmh2. This protein (extracted from the edible fungus Pleurotus ostreatus) is endowed with peculiar physicochemical properties, exceptional stability, and versatility. The unique properties of Vmh2 and, above all, its superior hydrophobicity, and stability allow to obtain a highly concentrated (≈440–510 μg mL−1) and stable exfoliated material (ζ-potential, +40/+70 mV). In addition controlled centrifugation enables the selection of biofunctionalized few-layer defect-free micrographene flakes, as assessed by Raman spectroscopy, atomic force microscopy, scanning electron microscopy, and electrophoretic mobility. This biofunctionalized product represents a high value added material for the emerging applications of graphene in the biotechnological field such as sensing, nanomedicine, and bioelectronics technologies., This work was supported by The European Commission Program, FP7-OCEAN (613844) and MINECO (Spain; BIO2013–49464-EXP and RTC-2014–2619–7); Ministero dell’Università e della Ricerca Scientifica (Italy)—Industrial Research Project PON01_01966 EnerbioChem, funded in the frame of Operative National Programme Research and Competitiveness 2007–2013 D. D. Prot. n. 01/Ric. 18.1.2010; P.O.R. Campania FSE 2007–2013, Project CREMe. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013–0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lanthanide-organic framework nanothermometers prepared by spray-drying

  • Wang, Zhuopeng
  • Carné-Sánchez, Arnau
  • Imaz, Inhar
  • Maspoch, Daniel
  • Rocha, João
  • Carlos, Luis D.
Accurate, noninvasive, and self-referenced temperature measurements at the submicrometer scale are of great interest, prompted by the ever-growing demands in the fields of nanotechnology and nanomedicine. The thermal dependence of the phosphor's luminescence provides high detection sensitivity and spatial resolution with short acquisition times in, e.g., biological fluids, strong electromagnetic fields, and fast-moving objects. Here, it is shown that nanoparticles of [(Tb0.914Eu0.086)2(PDA)3(H2O)]·2H2O (PDA = 1,4-phenylenediacetic acid), the first lanthanide–organic framework prepared by the spray-drying method, are excellent nanothermometers operating in the solid state in the 10–325 K range (quantum yield of 0.25 at 370 nm, at room temperature). Intriguingly, this system is the most sensitive cryogenic nanothermometer reported so far, combining high sensitivity (up to 5.96 ± 0.04% K−1 at 25 K), reproducibility (in excess of 99%), and low-temperature uncertainty (0.02 K at 25 K)., This work was developed in the scope of the project CICECO-Aveiro Institute of Materials (Ref. No. FCT UID /CTM /50011/2013), financed by national funds through the FCT/MEC and when applicable co-fi nanced by FEDER under the PT2020 Partnership Agreement. C.D.S.B. (SFRH/BPD/89003/2012) and D.A. (SFRH/BPD/95032/2013) thank FCT (Fundação para a Ciência e a Tecnologia) for postdoctoral grants. Z.W. also thanks the postdoctoral scholarship under the Project No. CENTRO-07-ST24-FEDER-002032. This work was also supported by the MINECO-Spain under the Project Nos. PN MAT2012-30994 and EU FP7 ERC-Co 615954. I.I. thanks the MINECO for the RyC fellowship. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant No. SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanopaper as an optical sensing platform

  • Morales-Narváez, Eden
  • Merkoçi, Arben
Bacterial cellulose nanopaper (BC) is a multifunctional material known for numerous desirable properties: sustainability, biocompatibility, biodegradability, optical transparency, thermal properties, flexibility, high mechanical strength, hydrophilicity, high porosity, broad chemical-modification capabilities and high surface area. Herein, we report various nanopaper-based optical sensing platforms and describe how they can be tuned, using nanomaterials, to exhibit plasmonic or photoluminescent properties that can be exploited for sensing applications. We also describe several nanopaper configurations, including cuvettes, plates and spots that we printed or punched on BC. The platforms include a colorimetric-based sensor based on nanopaper containing embedded silver and gold nanoparticles; a photoluminescent-based sensor, comprising CdSe@ZnS quantum dots conjugated to nanopaper; and a potential up-conversion sensing platform constructed from nanopaper functionalized with NaYF4:Yb3+@Er3+&SiO2 nanoparticles. We have explored modulation of the plasmonic or photoluminescent properties of these platforms using various model biologically relevant analytes. Moreover, we prove that BC is and advantageous preconcentration platform that facilitates the analysis of small volumes of optically active materials (∼4 μL). We are confident that these platforms will pave the way to optical (bio)sensors or theranostic devices that are simple, transparent, flexible, disposable, lightweight, miniaturized and perhaps wearable., This work was supported by MINECO (Spain, MAT2014-52485-P, BIO2013-49464-EXP). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimised room temperature, water-based synthesis of CPO-27-M metal-organic frameworks with high space-time yields

  • Garzón-Tovar, Luis
  • Carné-Sánchez, Arnau
  • Carbonell, Carlos
  • Imaz, Inhar
  • Maspoch, Daniel
PMCID: PMC4902134, The exceptional porosity of Metal-Organic Frameworks (MOFs) could be harnessed for countless practical applications. However, one of the challenges currently precluding the industrial exploitation of these materials is a lack of green methods for their synthesis. Since green synthetic methods obviate the use of organic solvents, they are expected to reduce the production costs, safety hazards and environmental impact typically associated with MOF fabrication. Herein we describe the stepwise optimisation of reaction parameters (pH, reagent concentrations and reaction time) for the room temperature, water-based synthesis of several members of the CPO-27/MOF-74-M series of MOFs, including ones made from Mg(ii), Ni(ii), Co(ii) and Zn(ii) ions. Using this method, we built MOFs with excellent BET surface areas and unprecedented Space-Time Yields (STYs). Employing this approach, we have synthesised CPO-27-M MOFs with record BET surface areas, including 1279 m2 g-1 (CPO-27-Zn), 1351 m2 g-1 (CPO-27-Ni), 1572 m2 g-1 (CPO-27-Co), and 1603 m2 g-1 (CPO-27-Mg). We anticipate that our method could be applied to produce CPO-27-Ni, -Mg, -Co and -Zn with STYs of 44 kg m-3 per day, 191 kg m-3 per day, 1462 kg m-3 per day and a record 18720 kg m-3 per day, respectively., This work was supported by the Spanish MINECO (project PN MAT2012-30994) and the EC (project FP7 ERC-Co 61594). I. I. acknowledges the Spanish MINECO for a Ramón y Cajal grant. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Program (Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader, Marta
  • López-Ortega, Alberto
  • Golosovsky, Igor V.
  • Estradé, Sònia
  • Roca, Alejandro G.
  • Salazar-Álvarez, G.
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Peiró, Francesca
  • Baró, María Dolors
  • Nogués, Josep
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.-- et al., The intimate relationship between stoichiometry and physicochemical properties in transition-metal oxides makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between the magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides., This work was supported by the 2014-SGR-1015 and 2009-SGR-35 projects of the Generalitat de Catalunya, by the MAT2010-20616-C02, MAT2011-27380-C02-01, MAT2010-16407, MAT2013-48628-R and CSD2009-00013 projects of the Spanish Ministerio de Economía y Competitividad (MINECO), the ONDA and COEFNANO projects (no. FP7-PEOPLE-2009-IRSES-247518 and no. FP7-PEOPLE-2012-IRSES-318901) of the European Union, the Russian grants RFBR 13-02-00121, 13-02-12429 and RG 14.B25.31.0025, the Brazilian grants CNPq-304368/2010-5 and FAPEMIG-PPM 00319-11, the Argentine grants PIP 1333 (CONICET) and SECTyP 06/C404 (Univ. Nac. de Cuyo) and the Swedish Research Council (VR). Research at NCSR “D” was supported by the HSF-EU program ARISTEIA, grant COMANA/22. GSA was partially supported by the Knut and Alice Wallenberg Foundation (Project: 3DEM-NATUR). I.V.G. thanks the Generalitat de Catalunya for his sabbatical fellowship (2010 PIV 00096). M.D.B. was partially supported by an ICREA Academia award. M.E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. A. G. Roca would like to thank Generalitat de Catalunya for financial support under the Beatriu de Pinós fellowship program (2011 BP_B 00209). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoluminescent lateral-flow immunoassay revealed by graphene oxide: Highly sensitive paper-based pathogen detection

  • Morales-Narváez, Eden
  • Naghdi, Tina
  • Zor, Erhan
  • Merkoçi, Arben
A paper-based lateral flow immunoassay for pathogen detection that avoids the use of secondary antibodies and is revealed by the photoluminescence quenching ability of graphene oxide is reported. Escherichia coli has been selected as a model pathogen. The proposed device is able to display a highly specific and sensitive performance with a limit of detection of 10 CFU mL–1 in standard buffer and 100 CFU mL–1 in bottled water and milk. This low-cost disposable and easy-to-use device will prove valuable for portable and automated diagnostics applications., This work was supported by MINECO, (Spain, BIO2013-49464-EXP). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two new adenine-based Co(II) coordination polymers: Synthesis, crystal structure, coordination modes, and reversible hydrochromic behavior

  • Burneo, Iván
  • Stylianou, Kyriakos C.
  • Rodríguez-Hermida, Sabina
  • Imaz, Inhar
  • Maspoch, Daniel
We report the synthesis of two new three-dimensional coordination polymers (CPs) based on Co(II), adenine, and aromatic tetracarboxylate linkers. Adenine exhibits bidentate binding modes in both CPs, coordinating through the N3 and N9 sites in a first compact CP and through the more rare N3 and N7 sites in a second open, flexible, and H2O-responsive CP. These differences together with an analysis of the extended coordination structures made of adenine reported in the Cambridge Structural Database illustrate the rich coordination versatility of adenine as a building block for CPs. Although the latter CP is nonporous to N2 or CO2, it shows a reversible and detectable color change from pink to purple, and vice versa, upon hydration and dehydration, respectively., I.B. thanks SENESCYT-Ecuador for a Ph.D. fellowship. I.I. and K.C.S. are grateful to MINECO, for a Ramon y Cajal grant, and to the EU, for a Marie Curie Fellowship (300390 NanoBioMOFs FP7-PEOPLE-2011-IEF), respectively. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Label-free nanoplasmonic sensing of tumor-associate autoantibodies for early diagnosis of colorectal cancer

  • Soler, María
  • Estévez, M. Carmen
  • Villar-Vázquez, Roi
  • Casal, J. Ignacio
  • Lechuga, Laura M.
57 p.-4 fig.-2 tab., Colorectal cancer is treatable and curable when detected at early stages. However there is a lack of less invasive and more specific screening and diagnosis methods which would facilitate its prompt identification. Blood circulating autoantibodies which are immediately produced by the immune system at tumor appearance have become valuable biomarkers for preclinical diagnosis of cancer. In this work, we present the rapid and label-free detection of colorectal cancer autoantibodies directly in blood serum or plasma using a recently developed nanoplasmonic biosensor. Our nanoplasmonic device offers sensitive and real-time quantification of autoantibodies with excellent selectivity and reproducibility, achieving limits of detection around 1 nM (150–160 ng mL−1). A preliminary evaluation of clinical samples of colorectal cancer patients has shown good correlation with ELISA. These results demonstrate the reliability of the nanobiosensor strategy and pave the way towards the achievement of a sensitive diagnostic tool for early detection of colorectal cancer., M. Soler acknowledges financial support from “Programa de Formación de Personal Investigador (FPI)” from the Spanish Ministry of Economy and Competitiveness (MINECO). R. Villar-Vazquez was a recipient of a FPU fellowship from the Spanish Ministry of Education and Culture. We acknowledge the financial support from COLONTEST project (RETOS-COLABORACIÓN Subprogram, RTC-2014-1518-1). The NanoB2A is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya (2014 SGR 624). ICN2 is the recipient of Grant SEV-2013-0295 from the “Severo Ochoa Centers of Excellence” Program of Spanish MINECO. In addition, JI Casal was supported by the grant BIO2012-31023 from the MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotexturing to enhance photoluminescent response of atomically thin indium selenide with highly tunable band gap

  • Brotons-Gisbert, Mauro
  • Hidalgo, Francisco
  • Tobias, Gerard
  • Canadell, Enric
  • Ordejón, Pablo
  • Martínez Pastor, Juan Pascual
  • Sánchez-Royo, Juan F.
Brotons-Gisbert, Mauro et al., Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density., This work was supported by the Spanish Government (Grant Nos. TEC2014-53727-C2-1-R and MAT2014-53500-R as well as Grants FIS2015-64886-C5-3-P and FIS2015-64886-C5-4-P), the Comunidad Valenciana Government (Grant No. PROMETEOII/ 2014/059), and the Generalitat de Catalunya Government (2014SGR301). The work at Berkeley was supported by National Science Foundation No. DMR-1306601. Authors thank the Central Support Service for Experimental Research (SCSIE) (SEM and Micro-PL facilities) of the University of Valencia. J.F.S.R. acknowledges financial support from the Mobility Program of VLC-CAMPUS. E.C., G.T., F.H., and P.O. acknowledge support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grants SEV-2015-0496 and SEV-2013-0295. F.H. acknowledges support of CONACYT. M.B.G. acknowledges his fellowship no. UVINV-PREDOC13-110538 under the program “Atracció de Talent, VLC-CAMPUS” of the University of Valencia. D.A.P. acknowledges his contract CPI-15-276 under the program PROMETEOII/2014/059., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous synthesis of LiFePO4 with fractal granularity

  • Caban-Huertas, Zahilia
  • Ayyad, Omar
  • Dubal, Deepak P.
  • Gómez-Romero, P.
Lithium iron phosphate (LiFePO4) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consisted of nanoparticles grown into larger micro-sized formations which in turn agglomerate leading to high tap density electrodes, which is beneficial for energy density. These intricate structures could be easily and effectively coated with a thin and uniform carbon layer for increased conductivity, as it is well established for simpler microstructures. Materials and electrodes were studied by means of XRD, SEM, TEM, SAED, XPS, Raman and TGA. Last but not least, lithium transport through fractal LiFePO4 electrodes was investigated based upon fractal theory. These water-made fractal electrodes lead to high-performance lithium cells (even at high rates) tested by CV and galvanostatic charge-discharge, their performance is comparable to state of the art (but less environmentally friendly) electrodes., Funding from the E C Seventh Framework program (FP7/2007-2013) under grant Agreement 266090 (SOMABAT) is gratefully acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Authors appreciate the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) for Catalan system of science and technology, Spain. We thank AGAUR (Generalitat de Catalunya) for project NESTOR Nanomaterials for Energy STORage. 2014_SGR_1505., EUR 1,165 APC fee funded by the EC FP7 Post-Grant Open Access Pilot, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier
  • Dettori, Riccardo
  • Melis, Claudio
  • Colombo, Luciano
  • Rurali, Riccardo
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, j, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of j on different features of the pore topology—such as the porosity and the pore diameter—and on the nanowire (NW) geometry—diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of j on porosity and NW diameter. The model illustrates the failure of Matthiessen’s rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term., We acknowledge financial support by the Spanish MINECO under Grant Nos. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 (co-funded by the EU under the FEDER Program), and TEC2015-67462-C2-1-R (MINECO/FEDER) and through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496; the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384; the Regione Sardegna basic research Project No. CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for financial support under Project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). The calculations have been performed at the Barcelona Supercomputing Center (BSC-CNS) within the project “Nanoporous silicon for thermoelectric applications (FI-2015-1-0010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo
  • Melis, Claudio
  • Rurali, Riccardo
  • Colombo, Luciano
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low–dimensional Si–based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering., We acknowledge the financial support by the Spanish MINECO under Grant Nos. FEDER-FIS2012-37549-C05-02, FEDER-MAT2013-40581-P, TEC2012-31330, and TEC2015-67462-C2-1-R, the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496. We also acknowledge the financial support by the Regione Sardegna basic research project CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for the financial support under project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). We finally acknowledge the computational support by CINECA under ISCRA project TREWI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heat transport through a solid–solid junction: the interface as an autonomous thermodynamic system

  • Rurali, Riccardo
  • Colombo, Luciano
  • Cartoixà, Xavier
  • Wilhelmsen, Øivind
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions., We acknowledge financial support from the Ministerio de Economı´a y Competitividad (MINECO) under grant no. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 and TEC2015-67462-C2-1-R (co-funded by the EU under the FEDER program), the Generalitat de Catalunya under grant no. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under grant no. SEV-2013-0295 and SEV-2015-0496 and from the Research Council of Norway under Project no. 221672. The Department of Chemistry, Faculty of Science and Technology, Norwegian University of Science and Technology supported ØW, TT, DB, and SK., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale coordination polymers obtained in ultrasmall liquid droplets on solid surfaces and its comparison to different synthetic volume scales

  • Bellido, Elena
  • González-Monje, Pablo
  • Guardingo, Mireia
  • Novio, Fernando
  • Montero, Mavis L.
  • Ruiz Molina, Daniel
This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence.-- et al., Synthesis of coordination polymers at femtolitre scales assisted by an AFM tip has become an area of increasing interest due to the astonishing range of implications that derive from it, from gaining basic knowledge of confined reactions in femtolitre droplets to the fabrication of molecular-based devices. However, this field is still in its infancy, a reason why several new basic studies that allow us control over it are highly required. Herein we report the synthesis of [Co(CH3COO)2(μ-4,4′-bpy)] in femtolitre droplets on surfaces and the results are compared with those obtained for the same reaction at different volume scales., M. G. thanks the CSIC for a predoctoral grant (JAEpre). This work was supported by project MAT2015-70615-R from the Spanish Government and by FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano-Escobal, Irati
  • Gonzalez Rosillo, Juan Carlos
  • Domingo, Neus
  • Illa, Xavi
  • López-Barbera, José Francisco
  • Fornell, Jordina
  • Suriñach, Santiago
  • Baró, María Dolors
  • Puig Molina, Teresa
  • Pané, Salvador
  • Nogués, Josep
  • Sort, Jordi
Golvano-Escobal, Irati et al., Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks that are commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-1216 and 2014-SGR-753 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R, MAT2014-51778-C2-1-R and FIS2013-48668-C2-1-P from the Spanish Ministerio de Economía y Competitividad (MINECO) and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER). Dr. Eva Pellicer and Dr. Neus Domingo are also grateful to MINECO for the “Ramon y Cajal” contracts (RYC-2012-10839 and RYC-2010-06365 respectively). ICN2 and ICMAB acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295 and Grant SEV-2015-0496, respectively). The PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible 2D phase transition driven by an electric field: Visualization and control on the atomic scale

  • Wortmann, B.
  • Vörden, Dennis van
  • Graf, P.
  • Robles, Roberto
  • Abufager, Paula
  • Lorente, Nicolás
  • Bobisch, Christian A.
  • Möller, Rolf
We report on a reversible structural phase transition of a two-dimensional system that can be locally induced by an external electric field. Two different structural configurations may coexist within a CO monolayer on Cu(111). The balance between the two phases can be shifted by an external electric field, causing the domain boundaries to move, increasing the area of the favored phase controllable both in location and size. If the field is further enhanced new domains nucleate. The arrangement of the CO molecules on the Cu surface is observed in real time and real space with atomic resolution while the electric field driving the phase transition is easily varied over a broad range. Together with the well-known molecular manipulation of CO adlayers, our findings open exciting prospects for combining spontaneous long-range order with man-made CO structures such as >molecule cascades> or >molecular graphene>. Our new manipulation mode permits us to bridge the gap between fundamental concepts and the fabrication of arbitrary atomic patterns in large scale, by providing unprecedented insight into the physics of structural phase transitions on the atomic scale., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). R.R. and N.L. acknowledge financial support from Spanish MINECO (Grant No. MAT2012-38318-C03-02 with joint financing by FEDER Funds from the European Union). P.A. acknowledges the MINCyT (project PICT Bicentenario 1962), CONICET (project PIP 0272), and UNR (project PID 19/I375) and the CCT-Rosario Computational Center. C.A.B. acknowledges financial support through the German research council (DFG)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface engineering of a magnetic organometallic nanowire

  • Ormaza, Maider
  • Robles, Roberto
  • Bachellier, Nicolas
  • Abufager, Paula
  • Lorente, Nicolás
  • Limot, Laurent
The manipulation of the molecular spin state by atom doping is an attractive strategy to confer desirable magnetic properties to molecules. Here, we present the formation of novel magnetic metallocenes by following this approach. In particular, two different on-surface procedures to build isolated and layer-integrated Co-ferrocene (CoFc) molecules on a metallic substrate via atomic manipulation and atom deposition are shown. The structure as well as the electronic properties of the so-formed molecule are investigated combining scanning tunneling microscopy and spectroscopy with density functional theory calculations. It is found that unlike single ferrocene a CoFc molecule possesses a magnetic moment as revealed by the Kondo effect. These results correspond to the first controlled procedure toward the development of tailored metallocene-based nanowires with a desired chemical composition, which are predicted to be promising materials for molecular spintronics., R.R. and N.L. acknowledge financial support from Spanish MINECO (Grant MAT2012-38318-C03-02 with joint financing by FEDER Funds from the European Union). P.A. acknowledges financial support from CONICET. ICN2 acknowledges support from the Severo Ochoa Progam (MINECO, Grant SEV-2013-0295). IPCMS acknowledges financial support from the Agence Nationale de la Recherche through Grant ANR-13-BS10-0016, project LabEx NIE and project LabEx CSC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactions in ultra-small droplets by tip-assisted chemistry

  • Guardingo, Mireia
  • Busqué, Félix
  • Ruiz Molina, Daniel
This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence., The confinement of chemical reactions within small droplets has received much attention in the last few years. This approach has been proved successful for the in-depth study of naturally occurring chemical processes as well as for the synthesis of different sets of nanomaterials with control over their size, shape and properties. Different approaches such as the use of self-contained structures or microfluidic generated droplets have been followed over the years with success. However, novel approaches have emerged during the last years based on the deposition of femtolitre-sized droplets on surfaces using tip-assisted lithographic methods. In this feature article, we review the advances made towards the use of these ultra-small droplets patterned on surfaces as confined nano-reactors., M. G. thanks the CSIC for a predoctoral grant (JAEpre). This work was supported by projects MAT2015-70615-R and CTQ2013-41161-R from the Spanish Government and by FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., We acknowledge support by the CSIC Open Access publication initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic structure of 2H-NbSe2 single-layers in the CDW state

  • Silva-Guillén, José Ángel
  • Ordejón, Pablo
  • Guinea, Francisco
  • Canadell, Enric
Adensity functional theory study of NbSe2 single-layers in the normal non-modulated and the 3×3 CDWstates is reported.Weshow that, in the single layer, theCDWbarely affects the Fermi surface of the system, thus ruling out a nesting mechanism as the driving force for the modulation. TheCDW stabilizes levels lying around 1.35 eV below the Fermi level within the Se-based valence band but having a substantial Nb–Nb bonding character. The absence of interlayer interactions leads to the suppression of the pancake-like portion of the bulk Fermi surface in the single-layer.Weperform scanning tunneling microscopy simulations and find that the images noticeably change with the sign and magnitude of the voltage bias. The atomic corrugation of the Se sublayer induced by the modulation plays a primary role in leading to these images, but the electronic reorganization also has an important contribution. The analysis of the variation of these images with the bias voltage does not support a Fermi surface nesting mechanism for theCDW. It is also shown that underlying graphene layers (present in some of the recent experimental work) do not modify the conduction band, but do affect the shape of the valence band of NbSe2 single-layers. The relevance of these results in understanding recent physical measurements for NbSe2 single-layers is discussed. Introduction Transition metal dichalcogenides are layered materials, easily exfoliable due to the van der Waals forces linking their layers. They have been the focus of large attention in the past few years because they are ideal systems where to study the influence of the reduced electronic screening brought about by lowering the dimensionality from bulk to layers of different thickness. Among them, 2H-NbSe2 (from now on we will refer to it just as NbSe2) is metallic at room temperature, becomes superconducting (SC) at around 7 K [1, 2] and there are strong indications that it is a twogap superconductor [3–7]. Before reaching the SC state it undergoes a charge density wave (CDW) distortion at around 30 K [8, 9]. The bulk structure of NbSe2 is built from hexagonal layers containing Nb atoms in a trigonal prismatic coordination (see figure 1(a)) [10], but there are also relatively short interlayer Se–Se contacts providing a substantial interlayer coupling. Although, This work has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) through the ERC Advanced Grant NOVGRAPHENE (GA 290846). Work in Bellaterra was supported by Spanish MINECO (Grant Nos. FIS2015-64886-C5-3-P and FIS2015-64886-C5-4-P, and the Severo Ochoa Centers of Excellence Program under Grants SEV-2013-0295 and SEV-2015-0496), and Generalitat de Catalunya (2014SGR301). We thank M. Ugeda for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queraltó, Albert
  • Mata, Maria de la
  • Martínez Orellana, Lidia
  • Magén, César
  • Gibert, Marta
  • Arbiol, Jordi
  • Hühne, Ruben
  • Obradors, Xavier
  • Puig Molina, Teresa
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented CeGdO (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect (CSD2007-00041), and from the Catalan Government (2014-SGR-753, 2014-SGR-1638 and Xarmae). AQ and MdlM are also grateful for JAE-Predoc fellowship from CSIC (E-08-2012-1321248 and E-08-2013-1028356, co-financed by the European Social Fund). Authors also thank the INA-LMA facilities for the use of the advanced (S)TEM equipment., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-synthetic anisotropic wet-chemical etching of colloidal sodalite ZIF crystals

  • Avci-Camur, Civan
  • Carné-Sánchez, Arnau
  • Guillerm, Vincent
  • Carbonell, Carlos
  • Imaz, Inhar
  • Maspoch, Daniel
PMCID: PMC5134325., Controlling the shape of metal–organic framework (MOF) crystals is important for understanding their crystallization and useful for myriad applications. However, despite the many advances in shaping of inorganic nanoparticles, post-synthetic shape control of MOFs and, in general, molecular crystals remains embryonic. Herein, we report using a simple wet-chemistry process at room temperature to control the anisotropic etching of colloidal ZIF-8 and ZIF-67 crystals. Our work enables uniform reshaping of these porous materials into unprecedented morphologies, including cubic and tetrahedral crystals, and even hollow boxes, by an acid–base reaction and subsequent sequestration of leached metal ions. Etching tests on these ZIFs reveal that etching occurs preferentially in the crystallographic directions richer in metal–ligand bonds; that, along these directions, the etching rate tends to be faster on the crystal surfaces of higher dimensionality; and that the etching can be modulated by adjusting the pH of the etchant solution., This work was supported by the MINECO-Spain through projects PN MAT2012-30994 and EU FP7 ERC-Co 615954. I.I. and J.A. thanks the MINECO for a RyC and FPU fellowship, respectively, and V.G. is grateful to the Generalitat de Catalunya for a Beatriu de Pinós Fellowship. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomimetic replication of microscopic metal-organic framework patterns using printed protein patterns

  • Liang, Kang
  • Carbonell, Carlos
  • Maspoch, Daniel
  • Falcaro, Paolo
It is demonstrated that metal–organic frameworks (MOFs) can be replicated in a biomimetic fashion from protein patterns. Bendable, fluorescent MOF patterns are formed with micrometer resolution under ambient conditions. Furthermore, this technique is used to grow MOF patterns from fingerprint residue in 30 s with high fidelity. This technique is not only relevant for crime-scene investigation, but also for biomedical applications., P. F. acknowledges the Australian Research Council (ARC, DECRA Grant DE120102451), and the CSIRO AMTCP scheme. K.L. and J.J.R. acknowledge the OCE Scheme. This work was supported by the MINECO-Spain under Project No. PN MAT2012–30994 and the EC (project FP7 ERC-Co 61594). ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant No. SEV-2013–0295. This work was also supported by the ARC Centre of Excellence in Convergent Bio-Nano Science and Technology (Project No. CE140100036) and performed in part at the Materials Characterization and Fabrication Platform (MCFP) at The University of Melbourne and the Victorian Node of the Australian National Fabrication Facility (ANFF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Introducing asymmetric functionality into MOFs: via the generation of metallic Janus MOF particles

  • Ayala, Abraham
  • Carbonell, Carlos
  • Imaz, Inhar
  • Maspoch, Daniel
Herein we report a versatile methodology for engineering metallic Janus MOF particles based on desymmetrization at interfaces, whereby each MOF particle is partially coated with a desired metal. We demonstrate that it enables the fabrication of homogeneous Janus MOF particles according to the MOF (ZIF-8, UiO-66 or UiO-66-SH), the metal (Au, Co or Pt), the MOF particle size (from the micrometer to the submicrometer regime) and the metal-film thickness (from 5 nm to 50 nm) employed. We anticipate that our strategy could be applied to impart new functionalities to MOFs, including asymmetric functionalization, magnetic-guidance and motorization., This work was supported by the MINECO-Spain through projects PN MAT2012-30994 and EU FP7 ERC-Co 615954. I. I. thanks the MINECO for a RyC grant (RYC-2010-06530), and A. A. is grateful to the CONACYT for a predoctoral grant (CVU-36457). ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Healing damaged coatings using friction-sensitive hybrid microcapsules

  • García-Jimeno, Sonia
  • Cano-Sarabia, Mary
  • Mejías, Nereida
  • Navarro, Virtudes
  • Francés, Ana Belén
  • Maspoch, Daniel
A new healing surface coating technology based on the incorporation of hybrid melamine-formaldehyde–polyurethane (MF/PU) microcapsules which contain a healing mixture, into standard polyurethane surface coatings, is described. Microcapsules release the healing mixture upon surface scratching after mechanical damage., We thank the MICINN (Spain) for financial support through the project INNPACTO 2011-1229-020000. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-crystal and humidity-controlled powder diffraction study of the breathing effect in a metal-organic framework upon water adsorption/desorption

  • Aríñez-Soriano, Javier
  • Albalad, Jorge
  • Vila-Parrondo, Christian
  • Pérez-Carvajal, Javier
  • Rodríguez-Hermida, Sabina
  • Cabeza, Aurelio
  • Juanhuix, Jordi
  • Imaz, Inhar
  • Maspoch, Daniel
Herein we report a study on water adsorption/desorption-triggered single-crystal to single-crystal transformations in a MOF, by single-crystal and humidity-controlled powder X-ray diffraction and water-sorption measurements. We identified a gate-opening effect at a relative humidity of 85% upon water adsorption, and a gate-closure effect at a relative humidity of 55 to 77% upon water desorption. This reversible breathing effect between the "open" and the "closed" structures of the MOF involves the cleavage and formation of several coordination bonds., This work was supported by the Spanish MINECO through project PN MAT2015-65354-C2-1-R and by EU FP7 through ERC-Co grant agreement no. 615954. I. I. and J. A. thank the MINECO for a RyC grant (RYC-2010-06530) and a FPU predoctoral grant (AP2010-5934), respectively. J. A. also thanks the Chemistry PhD programme of the Universitat Autònoma de Barcelona. A. C. thanks MINECO and Junta de Andalucía through research projects MAT2013-41836-R and P12-FQM-1656, respectively. ICN2 acknowledges the support from the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-step synthesis of heterometallic coordination polymers using a polyazamacrocyclic linker

  • Aríñez-Soriano, Javier
  • Albalad, Jorge
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Busqué, Félix
  • Juanhuix, Jordi
  • Maspoch, Daniel
A new macrocyclic linker 1,4,7,10-tetraazacyclododecane-1,7-bis(4-acetamidobenzoic)-4,10-diacetic acid (HL1) was synthesized and characterized. This linker was used to create two heterometallic coordination polymers following a two-step synthesis. This synthesis consisted of first combining this polyazamacrocyclic linker with Ni(ii) or Mn(ii) ions to obtain the corresponding metallomacrocyclic complexes showing non-coordinated carboxylic groups. In a second step, these metallated macrocycles were used as building units to construct two heterometallic Ni(ii)-Zn(ii) and Mn(ii)-Zn(ii) coordination polymers when combined with Zn(ii) ions. In addition, a third Zn(ii)-Zn(ii) coordination polymer could also be synthesized by direct mixing of HL1 with Zn(ii) ions. Interestingly, the Mn(ii)-Zn(ii) coordination polymer exhibits a reversible type-I >crystal-to-amorphous transformation> upon water sorption/desorption., This work was supported by MINECO-Spain through project PN MAT2012-30994. I. I. and J. A. thank MINECO for an RyC contract (RYC-2010-06530) and an FPU predoctoral grant (AP-2010-5934), respectively. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Narrowing the zero-field tunneling resonance by decreasing the crystal symmetry of Mn12 acetate

  • Espín, Jordi
  • Zarzuela, R.
  • Maspoch, Daniel
  • Imaz, Inhar
  • Chudnovsky, E. M.
  • Tejada, Javier
We report the discovery of a less symmetric crystalline phase of Mn acetate, a triclinic phase, resulting from recrystallizing the original tetragonal phase reported by Lis in acetonitrile and toluene. This new phase exhibits the same structure of Mn acetate clusters and the same positions of tunneling resonances on the magnetic field as the conventional tetragonal phase. However, the width of the zero-field resonance is at least 1 order of magnitude smaller - can be as low as 50 Oe - indicating very small inhomogeneous broadening due to dipolar and nuclear fields., The work at the University of Barcelona has been supported by MINECO Project MAT2011-23698. J.E. thanks the MINECO for a FPI fellowship. The work of E.M.C was supported by the U.S. National Science Foundation; grant DMR-1161571. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program; grants SEV-2015-0496 and SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Freezing the nonclassical crystal growth of a coordination polymer using controlled dynamic gradients

  • Rubio-Martínez, Marta
  • Imaz, Inhar
  • Domingo, Neus
  • Carbonell, Carlos
  • Amabilino, David B.
  • Maspoch, Daniel
  • Puigmartí Luis, Josep
A methodology that can be efficiently used to synthesize, isolate, and study out-of-equilibrium crystal structures employing controlled and diffusion-limited microfluidic environments is demonstrated. Unlike studies conducted with conventional mixing procedures in a flask, it is proven experimentally and with numerical simulations that microfluidic technologies can undoubtedly fine-tune reaction times and reagents concentration profiles; factors that enable out-of-equilibrium crystal forms to be obtained., The authors acknowledge the financial support from MINECO-Spain, under projects MAT2012-30994 and CTQ2011-16009-E, the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant agreement no 615954 and from the Swiss National Science Foundation (SNF) through the project no 200021_160174. The authors thank the Microscopy Service of the UAB. M.R.-M. and C.C. thank the ICN2 for their research fellowship, I.I., N.D., and J.P.-L. thank the MINECO for RyC contracts. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A first cyclodextrin-transition metal coordination polymer

  • Xu, Heng
  • Rodríguez-Hermida, Sabina
  • Pérez-Carvajal, Javier
  • Juanhuix, Jordi
  • Imaz, Inhar
  • Maspoch, Daniel
The synthesis, X-ray crystallographic structure, and water uptake measurements of the first coordination polymer made of a cyclodextrin and a transition metal ion (in this case, Cu) are shown. This coordination polymer is made by connecting paddle-wheel Cu units through a γ-cyclodextrin functionalized with eight carboxylate groups, is stable in water, and shows selective water-induced reversible structural transformations., This work was supported by the Spanish MINECO (project PN MAT2012-30994) and the Catalan AGAUR (project 2014 SGR 80). I.I. thanks the MINECO for a RyC grant (RYC-2010-06530). H.X. thanks the Generalitat de Catalunya for an FI grant. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the amide groups in the CO2/N2 selectivity of a series of isoreticular, interpenetrated metal-organic frameworks

  • Safarifard, Vahid
  • Rodríguez-Hermida, Sabina
  • Guillerm, Vincent
  • Imaz, Inhar
  • Morsali, Ali
  • Maspoch, Daniel
Here we report the use of a pillaring strategy for the design and synthesis of three novel amide-functionalized metal-organic frameworks (MOFs), TMUs-22/-23/-24, isoreticular to the recently reported imine-functionalized TMU-6 and TMU-21 MOFs. An extensive study of their CO sorption properties and selectivity for CO over N, from single gas sorption isotherms to breakthrough measurements, revealed that not only the incorporation of amide groups but also their accessibility is crucial to obtain enhanced CO sorption and CO/N selectivity. Therefore, the MOF with more accessible amide groups (TMU-24) shows a CO/N selectivity value of ca. 10 (as revealed by breakthrough experiments), which is ca. 500% and 700% of the selectivity values observed for the other amide-containing (TMU-22 and TMU-23) and imine-containing (TMU-6 and TMU-21) MOFs., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2013-45008-P), the Catalan AGAUR (project 2014 SGR 80), and the ERC under the EU FP7 (ERC-Co 615954). I.I. and E.V.R.F. thank the MINECO for their RyC fellowships RYC-2010-06530 and RyC-2012-11427 and V.G. is grateful to the Generalitat de Catalunya for a Beatriu de Pinos Fellowship (2014 BP-B00155). ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grant SEV-2013-0295. E.V.R.F. and J.S.A. acknowledge the Generalitat Valenciana for PROMETEOII/2014/004. Support of this investigation by Tarbiat Modares University is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Switchable colloids, thin-films and interphases based on metal complexes with non-innocent ligands: the case of valence tautomerism and their applications

  • Vázquez Mera, Nuria
  • Novio, Fernando
  • Roscini, Claudio
  • Bellacanzone, Christian
  • Guardingo, Mireia
  • Hernando, Jordi
  • Ruiz Molina, Daniel
Successful nanostructuration approaches developed in the last few years have allowed the preparation of robust valence tautomeric (VT) switchable (micro-/nano-) structures of a variety of dimensions and morphologies. These results are expected to definitely foster the implementation of these materials on hybrid molecular electronic devices but also endorse new applications in other different fields such as sensing, drug delivery or water remediation, among others., N. A. V.-M. thanks the Ministerio de Ciencia e Innovación (MICINN) for a predoctoral FPU fellowship. M. G. thanks the CSIC for a predoctoral grant (JAEpre). C. B. thanks the ICN2 and the Severo Ochoa program for his predoctoral grant. This work was supported by projects MAT2015-70615-R and CTQ2015-65439-R from the Spanish Government and by FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carborane bis-pyridylalcohols as linkers for coordination polymers: Synthesis, crystal structures, and guest-framework dependent mechanical properties

  • Tsang, Min Ying
  • Rodríguez-Hermida, Sabina
  • Stylianou, Kyriakos C.
  • Tan, Fangchang
  • Negi, Divya
  • Teixidor, Francesc
  • Viñas, Clara
  • Choquesillo-Lazarte, Duane
  • Verdugo-Escamilla, Cristóbal
  • Guerrero, Miguel
  • Sort, Jordi
  • Juanhuix, Jordi
  • Maspoch, Daniel
  • Giner Planas, José
We report the synthesis and characterization of six novel coordination polymers (CPs) based on M(II) (M: Zn and Co), di-, tri-, and tetracarboxylate linkers and two novel bis-pyridylalcohol 1,7-bis{(pyridin-n′-yl)methanol}-1,7-dicarba-closo-dodecaboranes (n′ = 3, L1; n′ = 4, L2) ligands. The polycarboxylates are terephthalic acid (H2BDC), 1,3,5-benzenetricarboxylic acid (H3BTB), and 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4TCPB). Structural description of CPs reveals the flexibility of the carborane ligands and their ability to construct extended structures. The CP containing Co(II), BTB, and L2 behaves as a crystalline sponge for a variety of guests, showing a higher affinity for aromatic guest molecules. Single-crystal nanoindentation experiments indicate that a high number of specific interactions between the guests and the CP framework result in a high elastic modulus and hardness values., This work was supported by the EU FP7 ERC-Co 615954. M.Y.T., T.F., F.T., C.V. and J.G.P. acknowledge MEC grants CTQ2013-44670-R and the Generalitat de Catalunya (2014/ SGR/149) for financial support. J.S. thanks the Generalitat de Catalunya 2014/SGR/1015 for financial support and MAT2014-57960-C3-1-R for partial financial support and associated FEDER is acknowledged. The Intramural CSIC (201530E011) provided X-ray structural facilities for this work. ICMAB and ICN2 acknowledge the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grants SEV-2015-0496 and SEV-2013-0295. F.T. is enrolled in the UAB Ph.D. program and acknowledges the China Scholarship Council (CSC) for her Ph.D. grant (201506060171)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast epitaxial growth kinetics in functional oxide thin films grown by pulsed laser annealing of chemical solutions

  • Queraltó, Albert
  • Pérez del Pino, Ángel
  • Mata, Maria de la
  • Arbiol, Jordi
  • Tristany, Mar
  • Obradors, Xavier
  • Puig Molina, Teresa
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2013-0295 and SEV-2015- 0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-51778-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect CSD2007-00041, and from the Catalan Government with 2014-SGR-753, 2014-SGR-1638 and Xarmae. AQ and MdlM are also grateful to CSIC and European Social Fund program for JAE-Predoc fellowships (E-08-2012-1321248 and E-08-2013-1028356)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Last advances in silicon-based optical biosensors

  • Fernández Gavela, Adrián
  • Grajales García, Daniel
  • Ramírez, Jhonattan C.
  • Lechuga, Laura M.
We review the most important achievements published in the last five years in the field of silicon-based optical biosensors. We focus specially on label-free optical biosensors and their implementation into lab-on-a-chip platforms, with an emphasis on developments demonstrating the capability of the devices for real bioanalytical applications. We report on novel transducers and materials, improvements of existing transducers, new and improved biofunctionalization procedures as well as the prospects for near future commercialization of these technologies., The nanoB2A is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya (2014 SGR 624). ICN2 is the recipient of Grant SEV-2013-0295 from the “Severo Ochoa Centers of Excellence” Program of Spanish MINECO. Laura M. Lechuga acknowledges the Brazilian Program Science without Frontiers for International Cooperation—MEC/MCTI/CAPES/CNPq/FAPs, project No. 313690/2013-8. Daniel Grajales García acknowledges to the Mexican Council of Science and Technology (CONACYT) for the scholarship 218103-CVU 397275. Jhonattan C. Ramirez acknowledges to the National Counsel of Technological and Scientific Development (CNPq) Brazil., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of antibody-functionalized carbon nanotubes filled with radioactivable metals towards a targeted anticancer therapy

  • Spinato, Cinzia
  • Kierkowicz, Magdalena
  • Pach, Elzbieta
  • Martincic, Markus
  • Ballesteros, Belén
  • Tobias, Gerard
  • Bianco, Alberto
Spinato, Cinzia et al., In the present work we have devised the synthesis of a novel promising carbon nanotube carrier for the targeted delivery of radioactivity, through a combination of endohedral and exohedral functionalization. Steam-purified single-walled carbon nanotubes (SWCNTs) have been initially filled with radioactive analogues (i.e. metal halides) and sealed by high temperature treatment, affording closed-ended CNTs with the filling material confined in the inner cavity. The external functionalization of these filled CNTs was then achieved by nitrene cycloaddition and followed by the derivatization with a monoclonal antibody (Cetuximab) targeting the epidermal growth factor receptor (EGFR), overexpressed by several cancer cells. The targeting efficiency of the so-obtained conjugate was evaluated by immunostaining with a secondary antibody and by incubation of the CNTs with EGFR positive cells (U87-EGFR+), followed by flow cytometry, confocal microscopy or elemental analyses. We demonstrated that our filled and functionalized CNTs can internalize more efficiently in EGFR positive cancer cells., The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007–2013/ under REA grant agreement no 290023 (RADDEL). This work was partly supported by the Centre National de la Recherche Scientifique (CNRS), by the Agence Nationale de la Recherche (ANR) through the LabEx project Chemistry of Complex Systems (ANR-10-LABX-0026_CSC) and by the International Center for Frontier Research in Chemistry (icFRC). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). KCL acknowledges support from WCR. The authors are grateful to Thomas Swan & Co. Ltd for providing Elicarb® SWCNTs. MM, MK and EP work has been done as a part of PhD program in Materials Sciences at UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of steam-treatment time on the length and structure of single-walled and double-walled carbon nanotubes

  • Kierkowicz, Magdalena
  • Pach, Elzbieta
  • Santidrián, Ana
  • Tobías Rossell, Ester
  • Kalbáč, Martin
  • Ballesteros, Belén
  • Tobias, Gerard
A major challenge to turn the potential of carbon nanotubes (CNTs) into customer applications is to reduce or eliminate their toxicity. Taking into account health and safety concerns, intensified research efforts have been conducted to improve the biocompatibility of CNTs, including the development of new shortening and purification strategies. Ideally, the methods used for improving the biocompatibility of CNTs should not alter the electronic properties of CNTs. Herein, we report on the shortening of a sample containing single-walled and double-walled CNTs using steam and obtain new insights in the properties of the steam-treated CNTs. The present study shows that short CNTs (median length ca. 200 nm) can be obtained under the reported conditions. Raman analysis reveals that wider and outer nanotubes undergo more significant changes than the narrower and inner ones, especially after a prolonged steam treatment., The research leading to these results has received fundingfrom the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007–2013/under REA grant agreement n8 290023 (RADDEL). ICN2 ac-knowledgessupport from the Severo OchoaProgram(MINECO, Grant SEV-2013-0295), and M. Kalbacthe support from MSMTproject LL1301. M. Kierkowicz and E. Pach are enrolled in the PhD Program in Materials Science at UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanotubes allow capture of krypton, barium and lead for multichannel biological X-ray fluorescence imaging

  • Serpell, Christopher J.
  • Martincic, Markus
  • Kierkowicz, Magdalena
  • Tobias, Gerard
  • Davis, Benjamin G.
Serpell, Christopher J. et al., The desire to study biology in situ has been aided by many imaging techniques. Among these, X-ray fluorescence (XRF) mapping permits observation of elemental distributions in a multichannel manner. However, XRF imaging is underused, in part, because of the difficulty in interpreting maps without an underlying cellular ‘blueprint’; this could be supplied using contrast agents. Carbon nanotubes (CNTs) can be filled with a wide range of inorganic materials, and thus can be used as ‘contrast agents’ if biologically absent elements are encapsulated. Here we show that sealed single-walled CNTs filled with lead, barium and even krypton can be produced, and externally decorated with peptides to provide affinity for sub-cellular targets. The agents are able to highlight specific organelles in multiplexed XRF mapping, and are, in principle, a general and versatile tool for this, and other modes of biological imaging., C.J.S., R.N.R., S.D.M., M.M., M.K., E.P., B.B., G.T. and B.G.D. were supported by the European Commission FP7-ITN RADDEL (contract number 290023). R.R. was supported by a Felix scholarship. K.W. was supported by a Margaret Pelly scholarship. We are grateful to the Diamond Light Source for the award of beamtime (SP11203/SP12063) and to beamline scientists at I18 for support. Ashley Shepherd at the Surface Analysis Facility of the Department of Chemistry at the University of Oxford collected the XPS data, and Errin Johnson at the Dunn School of Pathology of the University of Oxford prepared biological samples for STEM. We are also grateful to MATGAS for providing access to TGA equipment and Mar Estelles for training and support. We are grateful to Thomas Swan & Co. Ltd. for providing Elicarb SWNT. M.M., M.K. and E.P. have conducted this work as part of the PhD program in Materials Sciences at the Universitat Autònoma de Barcelona. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). B.G.D. was supported by a Royal Society Wolfson Research Merit Award during the course of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imaging water thin films in ambient conditions using atomic force microscopy

  • Santos, Sergio
  • Verdaguer, Albert
This article belongs to the Special Issue Surface Forces and Thin Liquid Films., All surfaces exposed to ambient conditions are covered by a thin film of water. Other than at high humidity conditions, i.e, relative humidity higher than 80%, those water films have nanoscale thickness. Nevertheless, even the thinnest film can profoundly affect the physical and chemical properties of the substrate. Information on the structure of these water films can be obtained from spectroscopic techniques based on photons, but these usually have poor lateral resolution. When information with nanometer resolution in the three dimensions is needed, for example for surfaces showing heterogeneity in water affinity at the nanoscale, Atomic Force Microscopy (AFM) is the preferred tool since it can provide such resolution while being operated in ambient conditions. A complication in the interpretation of the data arises when using AFM, however, since, in most cases, direct interaction between a solid probe and a solid surface occurs. This induces strong perturbations of the liquid by the probe that should be controlled or avoided. The aim of this review is to provide an overview of different AFM methods developed to overcome this problem, measuring different interactions between the AFM probe and the water films, and to discuss the type of information about the water film that can be obtained from these interactions., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., This work was supported by the Ministerio de Economia y Competitividad (MINECO), Spain, through Project MAT2012-38319-C02-01. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hetero-bimetallic paddlewheel clusters in coordination polymers formed by a water-induced single-crystal-to-single-crystal transformation

  • Albalad, Jorge
  • Aríñez-Soriano, Javier
  • Vidal Gancedo, José
  • Lloveras, Vega
  • Juanhuix, Jordi
  • Imaz, Inhar
  • Aliaga Alcalde, Nuria
  • Maspoch, Daniel
Herein we report a water-induced single-crystal to single-crystal transformation that involves the formation of hetero-bimetallic paddlewheel clusters in coordination polymers. Through this transformation, which involves the cleavage and formation of different coordination bonds, two different Cu(II)-Zn(II) and Cu(II)-Ni(II) paddle-wheel units exhibiting a 1 : 1 metal ratio were created., This work was supported by the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2013-47869-C4-2-P), DGI grant BeWell (CTQ2013-40480-R), the Catalan AGAUR (project 2014-SGR-80 and 2014-SGR-17), and the ERC under the EU FP7 (ERC-Co 615954). J. A. thanks the Generalitat de Catalunya for a FI fellowship (2016FI B 00449). ICN2 and ICMAB acknowledge the support of the Spanish MINECO through the Severo Ochoa Centres of Excellence Programme, under Grants SEV-2013-0295 and SEV-2015-0496. The authors thank Dr N. Clos from the Serveis Cientifíco-Tècnics of the University of Barcelona for her assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic features in the electronic structure of the two-dimensional transition metal trichalcogenide TiS3: electron doping and plasmons

  • Silva Guillén, José Ángel
  • Canadell, Enric
  • Ordejón, Pablo
  • Guinea, Francisco
  • Roldán, Rafael
Analysis of the band structure of TiS3 single-layers suggests the possibility of changing their physical behaviour by injecting electron carriers. The anisotropy of the valence and conduction bands is explained in terms of their complex orbital composition. The nature of the Fermi surface and Lindhard response function for di erent doping concentrations is studied by means of rstprinciples DFT calculations. It is suggested that for electron doping levels x (number of electrons per unit cell) 0.18-0.30e the system could exhibit incommensurate charge or spin modulations which, however, would keep the metallic state whereas systems doped with smaller x would be 2D metals without any electronic instability. The e ect of spin-orbit coupling in the band dispersion is analysed. The DFT e ective masses are used to study the plasmon spectrum from an e ective low energy model. We nd that this material supports highly anisotropic plasmons, with opposite anisotropy for the electron and hole bands., We thank A Castellanos-Gomez for useful discussions and R Robles for assistance with the calculations. This work has received funding from the European Unions Seventh Framework Programme (FP7/2007-2013) through the ERC Advanced Grant NOVGRAPHENE (GA No. 290846), European Commission under the Graphene Flagship, contract CNECTICT-604391, the Spanish MINECO (through Grants No. FIS2015- 64886-C5-3-P, FIS2015-64886-C5-4-P, FIS2014- 58445-JIN and the Severo Ochoa Centers of Excellence Program under Grants SEV-2013-0295 and SEV-2015- 0496), and the Generalitat de Catalunya (2014SGR301), as well as from the Comunidad Autónoma de Madrid (CAM) MAD2D-CM Program (S2013/MIT-3007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of self-organized Mn3O4 nanoinclusions in LaMnO3 films

  • Pomar, Alberto
  • Konstantinović, Z.
  • Bagués, Núria
  • Roqueta, Jaume
  • López Mir, Laura
  • Balcells, Lluis
  • Frontera, Carlos
  • Mestres, Narcís
  • Sandiumenge, Felip
  • Martínez Perea, Benjamín
  • Santiso, José
et al., We present a single-step route to generate ordered nanocomposite thin films of secondary phase inclusions (Mn3O4) in a pristine perovskite matrix (LaMnO3) by taking advantage of the complex phase diagram of manganese oxides. We observed that in samples grown under vacuum growth conditions from a single LaMnO3 stoichiometric target by Pulsed Laser Deposition, the most favorable mechanism to accommodate Mn2+ cations is the spontaneous segregation of self-assembled wedge-like Mn3O4 ferrimagnetic inclusions inside a LaMnO3 matrix that still preserves its orthorhombic structure and its antiferromagnetic bulk-like behavior. A detailed analysis on the formation of the self-assembled nanocomposite films evidences that Mn3O4 inclusions exhibit an epitaxial relationship with the surrounding matrix that it may be explained in terms of a distorted cubic spinel with slight (~9°) c-axis tilting. Furthermore, a Ruddlesden-Popper La2MnO4 phase, helping to the stoichiometry balance, has been identified close to the interface with the substrate. We show that ferrimagnetic Mn3O4 columns influence the magnetic and transport properties of the nanocomposite by increasing its coercive field and by creating local areas with enhanced conductivity in the vicinity of the inclusions., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV-2015-0496 and SEV 2013-0295), Projects MAT2011-29081 and MAT2015-71664-R and Ministry of Education and Science of Serbia (Grant—III45018) is acknowledged. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). NB thanks the Spanish MINECO for financial support through the FPI program., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AFM imaging of mercaptobenzoic acid on Au(110): submolecular contrast with metal tips

  • Hauptmann, Nadine
  • Robles, Roberto
  • Abufager, Paula
  • Lorente, Nicolás
  • Berndt, Richard
A self-assembled monolayer of mercaptobenzoic acid (MBA) on Au(110) is investigated with scanning tunneling and atomic force microscopy (STM and AFM) and density functional calculations. High-resolution AFM images obtained with metallic tips show clear contrasts between oxygen atoms and phenyl moieties. The contrast above the oxygen atoms is due to attractive covalent interactions, which is different than previously reported high-resolution images, where Pauli repulsion dominated the image contrast. We show that the bonding of MBA to the substrate occurs mainly through dispersion interactions, whereas the thiol-Au bond contributes only a quarter of the adsorption energy. No indication of Au adatoms mediating the thiol-Au interaction was found in contrast to other thiol-bonded systems. However, MBA lifts the Au(110)-(2 × 1) reconstruction., Financial support from the Deutsche Forschungsgemeinschaft via the SFB 677 is gratefully acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). P.A. acknowledges the MINCyT (project PICT Bicentenario 1962), CONICET (project PIP 0272), and UNR (project PID 19/I375) and the CCT-Rosario Computational Center., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D visualization of the iron oxidation state in FeO/Fe3O4 core-shell nanocubes from electron energy loss tomography

  • Torruella, Pau
  • Arenal, Raúl
  • Peña, Francisco de la
  • Saghi, Zineb
  • Yedra, Lluís
  • Eljarrat, Alberto
  • López-Conesa, Lluís
  • Estrader, Marta
  • López-Ortega, Alberto
  • Salazar-Álvarez, G.
  • Nogués, Josep
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiró, Francesca
  • Estradé, Sònia
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample., This work has been carried out in the frame of the Spanish research projects MAT2013-41506, MAT2013-48628-R, FIS2013-46159-C3-3-P, and CSD2009-00013, and Catalan Government support from the SGR2014-672 and 2014-SGR1015 projects is acknowledged. We also acknowledge the support received from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative-I3). G.S.A. was partially supported by the Knut and Alice Wallenberg Foundation (Project: 3DEMNATUR). M.E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). F.d.l.P. and C.D. acknowledge funding from the ERC under grant no. 259619 PHOTO EM. C.D. acknowledges the Royal Society for funding, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Above-bandgap photovoltages in antiferroelectrics

  • Pérez-Tomás, Amador
  • Lira-Cantú, Mónica
  • Catalán, Gustau
The first antiferroelectric solar cell is presented. This study shows that antiferroelectric thin-film photovoltaic current can be switched on when biased into the polar phase to generate abovebandgap photovoltages in excess of 100 V and photovoltaic fields of several megavolts per centimeter, the largest ever measured for any material., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295, and the grants ENE2013-48816-C5-4-R and FIS2013-48668-C2-1-P. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to consolidated Catalonia research groups 2014SGR 1212 and 1216-F. To the COST Action StableNextSol project MP1307; and to the European Research Council (ERC) Starting Grant, project No. 308023., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances and promises of layered halide hybrid perovskite semiconductors

  • Pedesseau, Laurent
  • Sapori, Daniel
  • Traore, Boubacar
  • Robles, Roberto
  • Fang, Hong-Hua
  • Loi, Maria Antonietta
  • Tsai, Hsinhan
  • Nie, Wanyi
  • Blancon, Jean-Christophe
  • Neukirch, Amanda
  • Tretiak, Sergei
  • Mohite, Ashwini A.
  • Katan, Claudine
  • Even, Jacky
  • Kepenekian, M.
Layered halide hybrid organic-inorganic perovskites (HOP) have been the subject of intense investigation before the rise of three-dimensional (3D) HOP and their impressive performance in solar cells. Recently, layered HOP have also been proposed as attractive alternatives for photostable solar cells and revisited for light-emitting devices. In this review, we combine classical solid-state physics concepts with simulation tools based on density functional theory to overview the main features of the optoelectronic properties of layered HOP. A detailed comparison between layered and 3D HOP is performed to highlight differences and similarities. In the same way as the cubic phase was established for 3D HOP, here we introduce the tetragonal phase with D symmetry as the reference phase for 2D monolayered HOP. It allows for detailed analysis of the spin-orbit coupling effects and structural transitions with corresponding electronic band folding. We further investigate the effects of octahedral tilting on the band gap, loss of inversion symmetry and possible Rashba effect, quantum confinement, and dielectric confinement related to the organic barrier, up to excitonic properties. Altogether, this paper aims to provide an interpretive and predictive framework for 3D and 2D layered HOP optoelectronic properties., The work at FOTON is supported by Agence Nationale pour la Recherche (SNAP and SuperSansPlomb projects) and was performed using HPC resources from GENCI-CINES/IDRIS Grant 2016-c2012096724. The work at ISCR is supported by Agence Nationale pour la Recherche (TRANSHYPERO project). J.E.’s work is supported by the Fondation d’entreprises banque Populaire de l’Ouest under Grant PEROPHOT 2015. The work at Los Alamos National Laboratory (LANL) was supported by LANL LDRD program and was partially performed at the Center for Nonlinear Studies and at the Center for Integrated Nanotechnologies, a U.S. Department of Energy, Office of Science user facility. The Groningen team would like to acknowledge funding from European Research Council (ERC Starting Grant “Hy-SPOD” No. 306983) and by the Foundation for Fundamental Research on Matter (FOM), which is part of The Netherlands Organization for Scientific Research (NWO), under the framework of the FOM Focus Group “Next Generation Organic Photovoltaics”. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). This project received funding from the European Union's Horizon 2020 research and innovation programme under the grant agreement no. 687008., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ag:BiVO4 dendritic hybrid-architecture for high energy density symmetric supercapacitors

  • Patil, Santosh S.
  • Dubal, Deepak P.
  • Tamboli, Mohaseen S.
  • Ambekar, Jalindar D.
  • Kolekar, Sanjay S.
  • Gómez-Romero, P.
  • Kale, Bharat B.
  • Patil, Deepak R.
We demonstrate the fabrication of Ag:BiVO4 with a dendritic architecture by a template free hydrothermal method. Then, symmetric cells based on Ag:BiVO4 electrodes were assembled which exhibit an extended voltage window of up to 1.6 V with an excellent energy density of 2.63 mW h cm−3 (38.43 W h kg−1) and a power density of 558 mW cm−3 (8.1 kW kg−1)., The authors would like to thank the Department of Science and Technology (DST) INSPIRE faculty program (IFA-14/MS-05) and the Department of Electronics and Information Technology (DeitY, New Delhi) for financial support. The authors also acknowledge support from UGC-SAP, Department of Chemistry, Shivaji University Kolhapur. DPD and PGR appreciate the award with the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Co-fund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous ballistic transport in disordered bilayer graphene: A Dirac semimetal induced by dimer vacancies

  • Tuan, Dinh van
  • Roche, Stephan
We report anomalous quantum transport features in bilayer graphene in the presence of a random distribution of structural vacancies. By using an efficient real-space Kubo-Greenwood transport methodology, the impact of a varying density of dimer versus nondimer vacancies is investigated in very large scale disordered models. While nondimer vacancies are shown to induce localization regimes, dimer vacancies result in an unexpected ballistic regime whose energy window surprisingly enlarges with increasing impurity density. Such counterintuitive phenomenon is explained by the formation of an effective linear dispersion in the bilayer band structure, which roots in the symmetry breaking effects driven by dimer vacancies, and provides a realization of Dirac semimetals in high dimension., S.R. acknowledges the Spanish Ministry of Economy and Competitiveness (MAT2012-33911), the Secretaria de Universidades e Investigacion del Departamento de Economia y Conocimiento de la Generalidad de Cataluña, and the Severo Ochoa Program (MINECO SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Baselines for lifetime of organic solar cells

  • Gevorgyan, Suren A.
  • Mingorance, Alba
  • Krebs, Frederik C.
et al., The process of accurately gauging lifetime improvements in organic photovoltaics (OPVs) or other similar emerging technologies, such as perovskites solar cells is still a major challenge. The presented work is part of a larger effort of developing a worldwide database of lifetimes that can help establishing reference baselines of stability performance for OPVs and other emerging PV technologies, which can then be utilized for pass-fail testing standards and predicting tools. The study constitutes scanning of literature articles related to stability data of OPVs, reported until mid-2015 and collecting the reported data into a database. A generic lifetime marker is utilized for rating the stability of various reported devices. The collected data is combined with an earlier developed and reported database, which was based on articles reported until mid-2013. The extended database is utilized for establishing the baselines of lifetime for OPVs tested under different conditions. The work also provides the recent progress in stability of unencapsulated OPVs with different architectures, as well as presents the updated diagram of the reported record lifetimes of OPVs. The presented work is another step forward towards the development of pass-fail testing standards and lifetime prediction tools for emerging PV technologies., This work has been supported by the European Commission's StableNextSol COST Action MP1307. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 609788 (CHEETAH) and n° 290022 (ESTABLIS). ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant Nos. SEV-2013-0295 and ENE2013-48816-C5-4-R. Thanks goes to Agencia de Gestio d'Ajuts Universitaris i de Recerca for the support through the Xarxa de Referencia en Materials Avançats per a l'Energia (XaRMAE) and consolidated research group No. 2014SGR-1212. This work has been carried out under the Materials Science Ph.D. Degree for A.M. of the Universitat Autònoma de Barcelona. R.R. and H.H. are grateful for financial support from BMBF (grant number 03EK3502) and ESF. F.P. received support from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 659747. L.S. and M.R. received supported from the Portuguese Foundation for Science and Technology in the framework of the Strategic Program UID/FIS/04650/2013., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatible polydopamine-like particles for the removal of heavy metals at extremely low concentrations

  • Contreras Rodríguez, Ada Rebeca
  • Saiz-Poseu, Javier
  • García-Pardo, Javier
  • García Martínez, Beatriz
  • Lorenzo, Julia
  • Ojea-Jiménez, Isaac
  • Komilis, Dimitrios
  • Sedó, Josep
  • Busqué, Félix
  • Sánchez, Antoni
  • Ruiz Molina, Daniel
  • Font, Xavier
A family of catechol-based submicron particles, with sizes between 200 and 300 nm, was tested for the removal of Cd(II), Pb(II) and Cr(VI) in water. The highest adsorption capacity was obtained with catechol-based particles in the case of Pb(II), followed by Cd(II). However, the catechol particles failed to adsorb Cr(VI). Our results indicate an up to four-fold increase of the adsorption capacity of these particles compared to that of activated carbon under the same experimental conditions. To check the biocompatible character of the submicron particles, their stability was evaluated in a phosphate buffer solution (PBS) and in a cell culture medium. The results confirmed that the presence of proteins in the medium favors their stability. A bioluminescent Vibrio fischeri test and a cytotoxicity assay on the HepG2 cell line were used to determine that the catechol particles did not exhibit any substantial toxicity. The results show that these catechol-based particles can be used as an efficient biocompatible adsorbent to remove heavy metals at extremely low concentrations., A. R. Contreras Rodríguez thanks the financial support through the scholarship provided by the Consejo Nacional de Ciencia y Tecnologia (CONACYT, Mexico). D. Komilis is recipient of a scholarship from the TECNIOSPRING program (ACCIO, Generalitat de Catalunya). We also acknowledge financial support from MINECO (Project CTQ2010-15380/BQU) and MAT2012-38318-C03-02 from the Spanish Government and by FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Authors also thank CM1101 and MP1106 Cost Actions., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio(Sensing) devices based on ferrocene–functionalized graphene and carbon nanotubes

  • Rabti, Amal
  • Raouafi, Noureddine
  • Merkoçi, Arben
Both carbon nanotubes (CNTs) and graphene are important pillars in the ongoing efforts to devise new applications in nanotechnology. One of their most promising applications is building devices such as sensors and biosensors, which is important step for the development of personalized medical healthcare devices. Mediators are usually used and sought to modify the physicochemical properties of these materials. In this review, we highlight the importance of the functionalization of CNT and graphene derivatives with redox molecules taking ferrocene derivatives as a model molecule. The employed techniques during (bio)sensing measurements using various functionalization strategies are also described. In addition, we discuss various aspects related to the applications of ferrocene–modified CNTs and graphene in electrochemical sensors and biosensors with a focus on the explanation of both CNTs/graphene and ferrocene contributions in the catalytic systems, which in turn enhance the analytical performance of the (bio)sensing devices., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV–2013–0295) and MICINN for the Project MAT2011–25870 and Generalitat de Cataluña for SGR support. The Ministry of Higher Education and Scientific Research of Tunisia (MHESR), UTM University, LCAE laboratory (LR99ES15) and TWAS (grant #: RG–13–413 RG/PHA/AF/AC_C) are also acknowledged for research funds and mobility grants for AR., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge, spin and valley Hall effects in disordered grapheme

  • Cresti, A.
  • Nikolić, Branislav K.
  • Garcia, Jose H.
  • Roche, Stephan
The discovery of the integer quantum Hall effect in the early eighties of the last century, with highly precise quantization values for the Hall conductance in multiples of e2/h, has been the first fascinating manifestation of the topological state of matter driven by magnetic field and disorder, and related to the formation of non-dissipative current flow. In 2005, several new phenomena such as the spin Hall effect and the quantum spin Hall effect were predicted in the presence of strong spinorbit coupling and vanishing external magnetic field. More recently, the Zeeman spin Hall effect and the formation of valley Hall topological currents have been introduced for graphene-based systems, under time-reversal or inversion symmetrybreaking conditions, respectively. This review presents a comprehensive coverage of all these Hall effects in disordered graphene from the perspective of numerical simulations of quantum transport in two-dimensional bulk systems (by means of the Kubo formalism) and multiterminal nanostructures (by means of the Landauer-Büttiker scattering and nonequilibrium Green function approaches). In contrast to usual two-dimensional electron gases, the presence of defects in graphene generates more complex electronic features such as electron-hole asymmetry, defect resonances or percolation effect between localized impurity states, which, together with extra degrees of freedom (sublattice pseudospin, valley isospin), bring a higher degree of complexity and enlarge the transport phase diagram., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 696656. S. R. acknowledges funding from the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (Project No. FIS2015-67767-P (MINECO/FEDER)), the Secretaria de Universidades e Investigación del Departamento de Economía y Conocimiento de la Generalidad de Cataluña, and the Severo Ochoa Program (MINECO, Grant SEV2013-0295). We acknowledge computational resources from PRACE and the Barcelona Supercomputing Center (Mare Nostrum), under Project 2015133194. B. K. N. was supported by NSF Grant No. ECCS 1509094. The supercomputing time was provided by in part by XSEDE, which is supported by NSF Grant No. ACI-1053575., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of electron-transfer in immunonanosensors by using polyclonal and monoclonal antibodies

  • Mars, Abdelmoneim
  • Parolo, Claudio
  • Escosura-Muñiz, Alfredo de la
  • Raouafi, Noureddine
  • Merkoçi, Arben
The design and operation of biosensors is not trivial. For instance, variation in the output signal during monitoring of analytes can not usually be controlled. Hence, if such control were possible, and could be triggered on demand, it would greatly facilitate system design and operation. Herein, we report the design of two types of voltamperometric immunosensors, in which the magnitude of the current output signal (differential pulse voltammetry [DPV]) can be increased or decreased as needed. The designed systems use monoclonal and polyclonal anti-human IgG antibodies, conjugated to monopodal ferrocene-modified gold nanoparticles that are casted onto screen-printed carbon electrodes (Ab/mFcL/AuNPs/SPCEs). Upon addition of human IgG as antigen, the systems exhibit opposite responses according to the Ab: the current decreases when monoclonal Ab is used, whereas it increases when polyclonal Ab is used. We attributed the former response to inhibition of electron-transfer (due to the formation of a protein layer), and the latter response, to a global increase in electron transfer (induced by the aggregation of gold nanoparticles). These effects were confirmed by studying a custom-made lipoic acid-based bipodal ligand, which confirmed that the increase in current is effectively induced by the aggregation of the modified nanoparticles (pAb/mFcL/AuNPs). Both sensors have large dynamic ranges, although the pAb-based one was found to be 3.3-times more sensitive. Tests of selectivity and specificity for ovalbumin, α-lactalbumin and serum bovine albumin showed that the immunosensors are highly selective and specific, even in the presence of up to 1000-fold levels of potentially competitive proteins. The limit of detection for human IgG using the pAb/mFcL/AuNP bioconjugate was estimated to be 0.85 ng/mL. The pAb/mFcL/AuNPs-based biosensor has used to determine amounts of human IgG in real sample., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Authors wish to thank the Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya for Grant 2014 SGR 260 support and the MHESR, University of Tunis El-Manar and the LCAE laboratory for research funds and mobility grant awarded to AMM. MEC (Spain) for MAT2011-25870 grant is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coordination polymers built from 1,4-bis(imidazol-1-ylmethyl)benzene: From crystalline to amorphous

  • Adarsh, Nayarassery N.
  • Novio, Fernando
  • Ruiz Molina, Daniel
The supramolecular chemistry of the bis-imidazole ligand 1,4-bis(imidazol-1-ylmethyl)benzene, popularly known as bix, has been explored by various researchers in order to synthesize functional coordination polymers (CPs). The flexibility of the bix ligand, its unpredictable conformation and its coordination behaviour with transition metal ions have resulted in a huge number of structurally diverse and functionally intriguing CPs. In this perspective review we discuss the progress in CPs of bix between 1997 and today. More precisely, this review emphasizes the developments in functional supramolecular coordination polymers built from the bix ligand, from crystalline materials to amorphous nanomaterials., NNA thanks the EU for a Marie Curie Intra-European Fellowship. FN and DRM thank ICN2-CSIC, Spain for financial support, and especially the students and collaborators for their contributions to amorphous CPPs. This work was supported by project MAT2015-70615-R from the Spanish Government and by FEDER funds. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection of parathyroid hormone-like hormone in cancer cell cultures by gold nanoparticle-based lateral flow immunoassays

  • Chamorro-García, Alejandro
  • Escosura-Muñiz, Alfredo de la
  • Espinoza-Castañeda, Marisol
  • Rodríguez-Hernández, Carlos J.
  • Torres, Carmen de
  • Merkoçi, Arben
Parathyroid hormone-like hormone (PTHLH) exerts relevant roles in progression and dissemination of several tumors. However, factors influencing its production and secretion have not been fully characterized. The main limitation is the lack of specific, sensitive and widely available techniques to detect and quantify PTHLH. We have developed a lateral flow immunoassay using gold nanoparticles label for the fast and easy detection of PTHLH in lysates and culture media of three human cell lines (HaCaT, LA-N-1, SK-N-AS). Levels in culture media and lysates ranged from 11 to 20 ng/mL and 0.66 to 0.87 μg/mL respectively. Results for HaCaT are in agreement to the previously reported, whereas LA-N-1 and SK-N-AS have been evaluated for the first time. The system also exhibits good performance in human serum samples. This methodology represents a helpful tool for future in vitro and in vivo studies of mechanisms involved in PTHLH production as well as for diagnostics., [From the Clinical Editor]: Parathyroid Hormone-like Hormone (PTHLH) is known to be secreted by some tumors. However, the detection of this peptide remains difficult. The authors here described their technique of using gold nanoparticles as label for the detection of PTHLH by Lateral-flow immunoassays (LFIAs). The positive results may also point a way to using the same technique for the rapid determination of other relevant cancer proteins., Grant/Funding Support: ICN2 acknowledges support of the Spanish MINECO under Project MAT2014-52485-P and through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 and from the Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya (Grant 2014 SGR 260). The authors also wish to acknowledge funding from the Spanish Ministry of Health (FIS PI14/00040 to CdT), and Fundació Privada Cellex., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of the spin-lifetime anisotropy in graphene using oblique spin precession

  • Raes, Bart
  • Scheerder, Jeroen E.
  • Costache, Marius V.
  • Bonell, Fréderic
  • Sierra, Juan F.
  • Cuppens, Jo
  • Vondel, Joris van de
  • Valenzuela, Sergio O.
We determine the spin-lifetime anisotropy of spin-polarized carriers in graphene. In contrast to prior approaches, our method does not require large out-of-plane magnetic fields and thus it is reliable for both low-and high-carrier densities. We first determine the in-plane spin lifetime by conventional spin precession measurements with magnetic fields perpendicular to the graphene plane. Then, to evaluate the out-of-plane spin lifetime, we implement spin precession measurements under oblique magnetic fields that generate an out-of-plane spin population. We find that the spin-lifetime anisotropy of graphene on silicon oxide is independent of carrier density and temperature down to 150 K, and much weaker than previously reported. Indeed, within the experimental uncertainty, the spin relaxation is isotropic. Altogether with the gate dependence of the spin lifetime, this indicates that the spin relaxation is driven by magnetic impurities or random spin-orbit or gauge fields., This research was partially supported by the European Research Council under Grant Agreement No. 308023 SPINBOUND, by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contract No. MAT2013-46785-P and Severo Ochoa No. SEV-2013-0295), and by the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya. M.V.C., J.F.S. and J.C. acknowledge support from the Ramón y Cajal, Juan de la Cierva and Beatriu de Pinós programs, respectively. F.B. acknowledges funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/ under REA Grant Agreement No. 624897. J.E.S. and J.V.d.V. acknowledge funding from the Methusalem Funding of the Flemish Government and the Research Foundation-Flanders (FWO)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemically synthesized amorphous and crystalline nanowires: dissimilar nanomechanical behavior in comparison with homologous flat films

  • Zeeshan M. A.
  • Guerrero, Miguel
  • Nogués, Josep
  • Suriñach, Santiago
  • Baró, María Dolors
  • Pané, Salvador
  • Pellicer, Eva
  • Sort, Jordi
et al., The effects of constrained sample dimensions on the mechanical behavior of crystalline materials have been extensively investigated. However, there is no clear understanding of these effects in nano-sized amorphous samples. Herein, nanoindentation together with finite element simulations are used to compare the properties of crystalline and glassy CoNi(Re)P electrodeposited nanowires (ϕ ≈ 100 nm) with films (3 μm thick) of analogous composition and structure. The results reveal that amorphous nanowires exhibit a larger hardness, lower Young's modulus and higher plasticity index than glassy films. Conversely, the very large hardness and higher Young's modulus of crystalline nanowires are accompanied by a decrease in plasticity with respect to the homologous crystalline films. Remarkably, proper interpretation of the mechanical properties of the nanowires requires taking the curved geometry of the indented surface and sink-in effects into account. These findings are of high relevance for optimizing the performance of new, mechanically-robust, nanoscale materials for increasingly complex miniaturized devices., Partial financial support from the MAT2011-27380-C02-02 and the 2014 SGR-1015 research projects from the Spanish MINECO and the Generalitat de Catalunya is acknowledged. The authors also acknowledge funding support from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement 296679 (MANAQA). E.P. acknowledges the Spanish Ministerio de Economía y Competitividad (MINECO) for the ‘Ramon y Cajal’ contract (RYC-2012-10839). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective ionic-liquid microemulsion based electrodeposition of mesoporous Co-Pt films for methanol oxidation catalysis in alkaline media

  • Serrà, Albert
  • Gómez, Elvira
  • Golosovsky, Igor V.
  • Nogués, Josep
  • Vallés, Elisa
Pt-based direct methanol fuel cells are attracting increasing interest as environmentally friendly alternative energy sources. However, the high price of Pt and the difficulty to prepare favourable morphologies for catalysis (e.g., mesoporous materials) are hampering their development into feasible products. Here, we demonstrate a novel approach to efficiently grow mesoporous films of Pt-poor alloys (CoPt and CoPt), based on electrodeposition in ionic liquid-in-water (IL/W) microemulsions. The high proportion of the electrolytic aqueous solution in the IL/W microemulsion favors a significant deposition rate, while the presence of IL drops induces the formation of highly mesoporous films. The mesoporous alloys, with pores in the 8-11 nm range, exhibit excellent durability in acidic and alkaline aggressive media, maintaining their peculiar morphology. The structures are very efficient for the catalysis of methanol electro-oxidation in alkaline media, with minimal poisoning of the catalysts. These results pave the way to develop simple, versatile environmentally friendly fuel cell catalysts to commercialize new viable ecological alternative energy sources., This work was supported by the EU ERDF (FEDER) fund and the Spanish Government grant TEC2014-51940-C2-2-R from Ministerio de Economía y Competitividad (MINECO). The partial support from the 2014-SGR-1015 project from the Generalitat de Catalunya and the Russian grants RFBR 16-02-00058 and RG14.B25.31.0025 is also acknowledged. A. S. thanks the Ministerio de Educación, Cultura y Deporte for a predoctoral grant (FPU). The authors thank the CCiT-UB for the use of their equipment. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of dephasing on spin lifetime in ballistic spin-orbit materials

  • Cummings, Aron W.
  • Roche, Stephan
We theoretically investigate spin dynamics in spin-orbit-coupled materials. In the ballistic limit, the spin lifetime is dictated by dephasing that arises from energy broadening plus a nonuniform spin precession. For the case of clean graphene, we find a strong anisotropy with spin lifetimes that can be short even for modest energy scales, on the order of a few ns. These results offer deeper insight into the nature of spin dynamics in graphene, and are also applicable to the investigation of other systems where spin-orbit coupling plays an important role., This work is supported by the European Union Seventh Framework Programme under grant agreement 604391 Graphene Flagship, the Severo Ochoa Program (MINECO, Grant SEV-2013-0295), the Spanish Ministry of Economy and Competitiveness (MAT2012-33911), and Secretaría de Universidades e Investigación del Departamento de Economía y Conocimiento de la Generalidad de Cataluña., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electroactive graphene nanofluids for fast energy storage

  • Dubal, Deepak P.
  • Gómez-Romero, P.
Graphenes have been extensively studied as electrode materials for energy storage in supercapacitors and batteries, but always as solid electrodes. The conception and development of graphene electroactive nanofluids (ENFs) reported here for the first time provides a novel way to 'form' graphene electrodes and demonstrates proof of concept for the use of these liquid electrodes for energy storage in novel flow cells.Astabilized dispersion of reduced graphene oxide (rGO) in aqueous sulfuric acid solution was shown to have capacitive energy storage capabilities parallel to those of solid electrode supercapacitors (169 F g(rGO)) but working up to much faster rates (from 1mV s to the highest scan rate of 10 V s) in nanofluids with 0.025, 0.1 and 0.4 wt% rGO, featuring viscosities very close to that of water, thus being perfectly suitable for scalable flow cells. Our results provide proof of concept for this technology and include preliminary flow cell performance of rGO nanofluids under static and continuous flow conditions. Graphene nanofluids effectively behave as true liquid electrodes with very fast capacitive storage mechanism and herald the application not only of graphenes but also other 2D materials like MoS in nanofluids for energy storage and beyond., Authors acknowledge the award to DPD of a MarieCurie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV2013-0295. Also, partial funding from AGAUR (NESTOR project 2014-SGR-1505) and from Ministerio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced activity and acid pH stability of prussian blue-type oxygen evolution electrocatalysts processed by chemical etching

  • Han, Li-Juan
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Galán-Mascarós, José Ramón
et al., The development of upscalable oxygen evolving electrocatalysts from earth-abundant metals able to operate in neutral or acidic environments and low overpotentials remains a fundamental challenge for the realization of artificial photosynthesis. In this study, we report a highly active phase of heterobimetallic cyanide-bridged electrocatalysts able to promote water oxidation under neutral, basic (pH < 13), and acidic conditions (pH > 1). Cobalt-iron Prussian blue-type thin films, formed by chemical etching of Co(OH)(CO)·nHO nanocrystals, yield a dramatic enhancement of the catalytic performance toward oxygen production, when compared with previous reports for analogous materials. Electrochemical, spectroscopic, and structural studies confirm the excellent performance, stability, and corrosion resistance, even when compared with state-of-the-art metal oxide catalysts under moderate overpotentials and in a remarkably large pH range, including acid media where most cost-effective water oxidation catalysts are not useful. The origin of the superior electrocatalytic activity toward water oxidation appears to be in the optimized interfacial matching between catalyst and electrode surface obtained through this fabrication method., This work was supported by the European Union (Project ERC StG Grant CHEMCOMP No. 279313); the Spanish Ministerio de Economia y Competitividad (MINECO) through Projects CTQ2015-71287-R, TNT-FUELS, and e-TNT (MAT2014-59961-C2-2-R) and the Severo Ochoa Excellence Accreditations 2014−2018, SEV-2013-0319 and SEV-2013-0295, the Generalitat de Catalunya (2014-SGR-797 and 2014-SGR1638), and the ICIQ foundation. A.R.C. thanks the Marie Curie COFUND Action from the European Commission for cofinancing his postdoctoral fellowship. L.H. thanks MINECO for her predoctoral fellowship. The research leading to these results has also received funding from “La Caixa” Foundation., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced detection of quantum dots labeled protein by simultaneous bismuth electrodeposition into microfluidic channel

  • Medina-Sánchez, Mariana
  • Miserere, Sandrine
  • Cadevall, Miquel
  • Merkoçi, Arben
In this study, we propose an electrochemical immunoassay into a disposable microfluidic platform, using quantum dots (QDs) as labels and their enhanced detection using bismuth as an alternative to mercury electrodes. CdSe@ZnS QDs were used to tag human IgG as a model protein and detected through highly sensitive stripping voltammetry of the dissolved metallic component (cadmium in our case). The modification of the screen printed carbon electrodes (SPCEs) was done by a simple electrodeposition of bismuth that was previously mixed with the sample containing QDs. A magneto-immunosandwich assay was performed using a micromixer. A magnet placed at its outlet in order to capture the magnetic beads used as solid support for the immunoassay. SPCEs were integrated at the end of the channel as detector. Different parameters such as bismuth concentration, flow rate, and incubation times, were optimized. The LOD for HIgG in presence of bismuth was 3.5 ng/mL with a RSD of 13.2%. This LOD was about 3.3-fold lower than the one obtained without bismuth. Furthermore, the sensitivity of the system was increased 100-fold respect to experiments carried out with classical screen-printed electrodes, both in presence of bismuth., This work was supported by MINECO (Spain, MAT2014–52485–P). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV–2013–0295) and the supportfrom AGAUR, Generalitat de Catalunya (Grant 2014 SGR260)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced flexoelectric-like response in oxide semiconductors

  • Narváez, Jackeline
  • Vasquez-Sancho, Fabian
  • Catalán, Gustau
Flexoelectricity is a property of all dielectric materials whereby they polarize in response to deformation gradients such as those produced by bending. Although it is generally thought of as a property of dielectric insulators, insulation is not a formal requirement: in principle, semiconductors can also redistribute their free charge in response to strain gradients. Here we show that bending a semiconductor not only generates a flexoelectric-like response, but that this response can in fact be much larger than in insulators. By doping single crystals of wide-bandgap oxides to increase their conductivity, their effective flexoelectric coefficient was increased by orders of magnitude. This large response can be explained by a barrier-layer mechanism that remains important even at the macroscale, where conventional (insulator) flexoelectricity otherwise tends to be small. Our results open up the possibility of using semiconductors as active ingredients in electromechanical transducer applications., This research was funded by an ERC Starting grant from the EU (ERC 308023) and by a national research grant (FIS2013-48668-C2-1-P) from the Spanish MINECO. All research in ICN2 is supported by the Severo Ochoa Excellence Programme (SEV-2013-0295). F.V.-S. thanks MICITT and CONICIT for support during his PhD., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric performance of solution-derived bismuth telluride based nanocomposites via liquid-phase Sintering

  • Zhang, Chaohua
  • Mata, Maria de la
  • Belarre, Francisco J.
  • Arbiol, Jordi
  • Xiong, Qihua
et al., Bismuth telluride based thermoelectric materials show great promise in electricity generation from waste heat and solid-state refrigeration, but improving their conversion efficiency with economical approaches for widespread use remains a challenge. An economical facile bottom-up approach has been developed to obtain nanostructured powders, which are used to build bulk thermoelectric materials. Using excess tellurium as sacrificial additive to enable liquid-phase sintering in the spark plasma sintering process, the lattice and bipolar contributions to the thermal conductivity are both greatly reduced without compromising too much the power factor, which leads to the achievement of high figure of merit (ZT) in both n-type and p-type bismuth telluride based nanocomposites. The ZT values are 1.59±0.16 for p-type BiSbTe and 0.98±0.07 for n-type BiTeSe at 370 K, which are significantly high for bottom-up approaches. These results demonstrate that solution-chemistry approaches as facile, scalable and low-energy-intensive ways to achieve nanopowders, combined with liquid-phase sintering process, can open up great possibilities in developing high-performance low-price thermoelectric bulk nanocomposites., Q.X. gratefully thanks Singapore National Research Foundation via a Fellowship grant (NRF-RF2009-06) and an Investigator ship grant (NRF-NRFI2015-03), Ministry of Education via a tier2 grant (MOE2012-T2-2-086) and Nanyang Technological University via a start-up grant support (M58110061). F.J.B, M.d.l. M and J.A acknowledge the funding from the Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO project e-TNT (MAT2014-59961-C2-2-R). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Q.Y. thanks Singapore A*STAR Pharos program SERC 1527200022. D.P. acknowledges support from Singapore Ministry of Education, Singapore Academic Research Fund Tier-1 (project SUTDT12015005)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of phononic crystals on free-standing silicon membranes

  • Sledzinska, Marianna
  • Graczykowski, Bartlomiej
  • Alzina, Francesc
  • Santiso, José
  • Sotomayor Torres, C. M.
Free-standing Si films have been and remain an excellent example to study experimentally the effect of the reduction of the characteristic size on the phonon dispersion relation. A step further in geometrical complexity and, therefore, in increasing the control and manipulation of phonons is achieved by introducing periodicity in the medium to form phononic crystals. Here we report on the development of the fabrication process of large-area, solid-air and solid-solid two-dimensional phononic crystals, directly on free-standing, single crystalline silicon membranes. The patterning of the membranes involved electron-beam lithography and reactive ion etching for holes or metal evaporation and lift-off for pillars. The fabrication was possible due to the external strain induced on the membrane in order to reduce the buckling, which is typically found in large area free-standing structures. As a result, we obtained 250 nm thick structured membranes with patterned areas up to 100 × 100 μm, feature size between 100 and 300 nm and periodicity between 300 and 500 nm. The changes in dispersion relations of hypersonic acoustic phonons due to nanopatterning in free-standing silicon membranes were measured by Brillouin light scattering and the results were compared with numerical calculations by finite elements method. Information on phonon dispersion relation combined with a reliable fabrication process for large-scale structures opens a way for phonon engineering in more complex devices., The authors acknowledge the financial support from the FP7 FET Energy Project MERGING (Grant no. 309150); the Spanish MICINN projects nanoTHERM (Grant no. CSD2010-0044); TAPHOR (MAT2012-31392) and the program Severo Ochoa (Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of well-ordered silicon nanopillars embedded in a microchannel via metal-assisted chemical etching: a route towards an opto-mechanical biosensor

  • Solis-Tinoco, V.
  • Marquez, S.
  • Sepúlveda, Borja
  • Lechuga, Laura M.
Ordered nanopillars have been used as a smart configuration to design and fabricate localized surface plasmon resonance (LSPR) sensors. Importantly, these nanostructures can be integrated within microfluidic channels as a novel opportunity to enhance the response of biosensors and also to control the fluid flow by modifying the wettability surface of the walls. In this work, we demonstrate a large-scale and low-cost nanofabrication methodology that integrates the fabrication of silicon nanopillars (SiNPs) inside a microfluidic channel. The strategy is based on placing a catalytic gold layer patterned with nanoholes inside a SU-8 microchannel, by combining nanosphere lithography, reactive ion etching, and e-beam gold deposition, to control the area, separation distance and diameter of the nanostructures. The height of the SiNPs strongly depends on a well-controlled metal-assisted silicon etching protocol. We demonstrate experimentally that the design and the cleaning of the catalytic gold mesh using ultraviolet ozone strongly affect the etching rate for the formation of large-surface-area nanopillars. Our results explain the fast fabrication of hexagonal arrays of SiNPs embedded in a microfluidic channel with varying aspect ratio from 2 to 7 and separation of 300 nm and 400 nm, respectively, which has important implications for the achievement of new optomechanical biosensors., V. Solis-Tinoco & S. Marquez acknowledge financial support from “Programa becas en el extranjero” from National Council for Science and Technology (CONACyT-Mexico). The nanoB2A is a consolidated research group (Grup de Recerca) of the Generalitat de Catalunya and has support from the Departament d'Universitats, Recerca i Societat de la Informacio de la Generalitat de Catalunya (2014 SGR 624). ICN2 is the recipient of Grant SEV-2013-0295 from the “Severo Ochoa Centers of Excellence” Program of Spanish MINECO. We acknowledged financial support of MINECO, projects FIS2013-49280-EXP, MAT2011-12645-E., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe3O4@NiFexOy nanoparticles with enhanced electrocatalytic properties for oxygen evolution in carbonate electrolyte

  • Luo, ZhiShan
  • Martí-Sànchez, Sara
  • Nafria, Raquel
  • Mata, Maria de la
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
et al., The design and engineering of earth-abundant catalysts that are both cost-effective and highly active for water splitting are crucial challenges in a number of energy conversion and storage technologies. In this direction, herein we report the synthesis of FeO@NiFeO core-shell nanoheterostructures and the characterization of their electrocatalytic performance toward the oxygen evolution reaction (OER). Such nanoparticles (NPs) were produced by a two-step synthesis procedure involving the colloidal synthesis of FeO nanocubes with a defective shell and the posterior diffusion of nickel cations within this defective shell. FeO@NiFeO NPs were subsequently spin-coated over ITO-covered glass and their electrocatalytic activity toward water oxidation in carbonate electrolyte was characterized. FeO@NiFeO catalysts reached current densities above 1 mA/cm with a 410 mV overpotential and Tafel slopes of 48 mV/dec, which is among the best electrocatalytic performances reported in carbonate electrolyte., This work was supported by the European Regional Development Funds and the Spanish MINECO project BOOSTER, TNT-FUELS, e-TNT, Severo Ochoa Program (MINECO, Grant SEV-2013-0295), and PEC−CO2. Z.L. thanks the China Scholarship Council for scholarship support. P.G. acknowledges the People Programme (Marie Curie Actions) of the FP7/2007-2013 European Union Program (TECNIOspring grant agreement no. 600388) and the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ. M.I. thanks AGAUR for Beatriu de Pinos postdoctoral grant (2013 BP-A00344). J.L. is Serra Hunter Fellow and is grateful to ICREA Academia program. S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. Authors also acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferrocene-functionalized graphene electrode for biosensing applications

  • Rabti, Amal
  • Mayorga-Martínez, Carmen C.
  • Baptista-Pires, Luis
  • Raouafi, Noureddine
  • Merkoçi, Arben
A novel ferrocene-functionalized reduced graphene oxide (rGO)-based electrode is proposed. It was fabricated by the drop casting of ferrocene-functionalized graphene onto polyester substrate as the working electrode integrated within screen-printed reference and counter electrodes. The ferrocene-functionalized rGO has been fully characterized using FTIR, XPS, contact angle measurements, SEM and TEM microscopy, and cyclic voltammetry. The XPS and EDX analysis showed the presence of Fe element related to the introduced ferrocene groups, which is confirmed by a clear CV signal at ca. 0.25 V vs. Ag/AgCl (0.1 KCl). Mediated redox catalysis of HO and bio-functionalization with glucose oxidase for glucose detection were achieved by the bioelectrode providing a proof for potential biosensing applications., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and MICINN for the Project MAT2011–25870 and Generalitat de Cataluña for SGR support. The Ministry of Higher Education and Scientific Research of Tunisia (MHESR), the UTM University and the LCAE Laboratory are also acknowledged for research and travel funds granted for AR (LR99ES15)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Finite element analysis of true and pseudo surface acoustic waves in one-dimensional phononic crystals

  • Graczykowski, Bartlomiej
  • Alzina, Francesc
  • Gomis-Bresco, J.
  • Sotomayor Torres, C. M.
In this paper, we report a theoretical investigation of surface acoustic waves propagating in one-dimensional phononic crystal. Using finite element method eigenfrequency and frequency response studies, we develop two model geometries suitable to distinguish true and pseudo (or leaky) surface acoustic waves and determine their propagation through finite size phononic crystals, respectively. The novelty of the first model comes from the application of a surface-like criterion and, additionally, functional damping domain. Exemplary calculated band diagrams show sorted branches of true and pseudo surface acoustic waves and their quantified surface confinement. The second model gives a complementary study of transmission, reflection, and surface-to-bulk losses of Rayleigh surface waves in the case of a phononic crystal with a finite number of periods. Here, we demonstrate that a non-zero transmission within non-radiative band gaps can be carried via leaky modes originating from the coupling of local resonances with propagating waves in the substrate. Finally, we show that the transmission, reflection, and surface-to-bulk losses can be effectively optimised by tuning the geometrical properties of a stripe., The authors acknowledge the financial support from the FP7 project MERGING (Grant No. 309150); the Spanish MICINN projects nanoTHERM (Grant No. CSD2010-0044) and TAPHOR (MAT2012-31392); and the program Severo Ochoa (Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible ITO-free organic solar cells applying aqueous solution-processed V2O5 hole transport layer: An outdoor stability study

  • Lima, Francisco Anderson S.
  • Vasconcelos, Igor F.
  • Gevorgyan, Suren A.
  • Krebs, Frederik C.
  • Lira-Cantú, Mónica
et al., Solution processable semiconductor oxides have opened a new paradigm for the enhancement of the lifetime of thin film solar cells. Their fabrication by low-cost and environmentally friendly solution-processable methods makes them ideal barrier (hole and electron) transport layers. In this work, we fabricate flexible ITO-free organic solar cells (OPV) by printing methods applying an aqueous solution-processed VO as the hole transport layer (HTL) and compared them to devices applying PEDOT:PSS. The transparent conducting electrode was PET/Ag/PEDOT/ZnO, and the OPV configuration was PET/Ag/PEDOT/ZnO/P3HT:PCBM/HTL/Ag. Outdoor stability analyses carried out for more than 900 h revealed higher stability for devices fabricated with the aqueous solution-processed VO., ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant Nos. SEV-2013-0295 and ENE2013-48816-C5-4-R. Thanks goes to the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support through the Xarxa de Referència en Materials Avançats per a l’Energia (XaRMAE) and the consolidated research group No. 2014SGR-1212. To the COST Action StableNextSol Project No. MP1307. To CNPq and FUNCAP (Brazil) for the financial support to A.L., A.B., and I.V. Thanks goes to the European Research Infrastructure (SOPHIA) (Grant No. 262533) for providing access to manufacturing equipment at DTU., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Following the steps of a reaction by direct imaging of many individual molecules

  • Vörden, Dennis van
  • Robles, Roberto
  • Bobisch, Christian A.
  • Möller, Rolf
et al., The dehydrogenation and dechlorination of FeOEP-Cl on Cu(111) has been studied in detail by scanning tunneling microscopy. Although, it is not possible to follow the reaction of an individual molecule, the complete pathway of the reaction with 22 inequivalent intermediate states and the rates of the involved processes are revealed. This is achieved by combining the analysis of a large data set showing thousands of molecules in the different stages of the reaction with numerical simulations., C. A. Bobisch acknowledges financial support from the Deutsche Forschungsgemeinschaft (DFG). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles: impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto
  • Roca, Alejandro G.
  • Torruella, Pau
  • Petrecca, Michele
  • Estradé, Sònia
  • Peiró, Francesca
  • Puntes, Víctor F.
  • Nogués, Josep
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored., Financial support from the 2014-SGR-1015, MAT2010-20616-C02, MAT2013-48628-R, MAT2013-41506, and CSD2009-00013 projects is acknowledged. ALO acknowledges the Juan de la Cierva Program (MINECO IJCI-2014-21530). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-tunable atomically thin lateral MoS2 Schottky junction patterned by electron beam

  • Katagiri, Y.
  • Roche, Stephan
  • Haruyama, J.
et al., Among atomically thin two-dimensional (2D) materials, molybdenum disulfide (MoS) is attracting considerable attention because of its direct bandgap in the 2H-semiconducting phase. On the other hand, a 1T-metallic phase has been revealed, bringing complementary application. Recently, thanks to top-down fabrication using electron beam (EB) irradiation techniques, in-plane 1T-metal/2H-semiconductor lateral (Schottky) MoS junctions were demonstrated, opening a path toward the co-integration of active and passive two-dimensional devices. Here, we report the first transport measurements evidencing the formation of a MoS Schottky barrier (SB) junction with barrier height of 0.13-0.18 eV created at the interface between EB-irradiated (1T)/nonirradiated (2H) regions. Our experimental findings, supported by state-of-the-art simulation, reveal unique device fingerprint of SB-based field-effect transistors made from atom-thin 1T layers., This work at Aoyama Gakuin was partly supported by a Grant-in-aid for Scientific Research (Basic Research A: 24241046 and Challenging Exploratory Research: 15K13277) and grant for private University in MEXT and AOARD grant (135049) in U.S. Air Force Office of Scientific Research. The Tokyo University’s work was also supported by the Special Coordination Funds for Promoting Science and Technology. Computational resources at nanohub.org are gratefully acknowledged. S. Roche acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295). G.Iannacconne, Gianluca Fiori and Stephan Roche acknowledge the funding from the European Union Seventh Framework Programme under Grant agreement No. 604391 Graphene Flagship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-based Janus micromotors for the dynamic removal of pollutants

  • Orozco, Jahir
  • Mercante, Luiza A.
  • Pol, Roberto
  • Merkoçi, Arben
Persistent organic pollutants (POPs) are ubiquitous in the environment as a result of modern industrial processes. We present an effective POPs decontamination strategy based on their dynamic adsorption at the surface of reduced graphene oxide (rGO)-coated silica (SiO)-Pt Janus magnetic micromotors for their appropriate final disposition. While the motors rapidly move in a contaminated solution, the adsorption of POPs efficiently takes place in a very short time. Characterization of the micromotors both from the materials and from the motion point of view was performed. Polybrominated diphenyl ethers (PBDEs) and 5-chloro-2-(2,4-dichlorophenoxy) phenol (triclosan) were chosen as model POPs and the removal of the contaminants was efficiently achieved. The rGO-coated micromotors demonstrated superior adsorbent properties with respect to their concomitant GO-coated micromotors, static rGO-coated particles and dynamic silica micromotors counterparts. The extent of decontamination was studied over the number of micromotors, whose magnetic properties were used for their collection from environmental samples. The adsorption properties were maintained for 4 cycles of micromotors reuse. The new rGO-coated SiO functional material-based micromotors showed outstanding capabilities towards the removal of POPs and their further disposition, opening up new possibilities for efficient environmental remediation of these hazardous compounds., This study was supported by the European Commission Program, FP7-OCEAN, SMS Project (613844). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). The Nanobiosensors and Bioelectronics Group acknowledges the support from the Generalitat de Cataluña (Grant 2014 SGR 260). L. A. M. acknowledges the financial support from the FAPESP-BEPE (2014/26088-4) project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth of polypyrrole nanostructures through reactive templates for energy storage applications

  • Dubal, Deepak P.
  • Caban-Huertas, Zahilia
  • Holze, Rudolf
  • Gómez-Romero, P.
This work presents a facile reactive template route to prepare polypyrrole (PPy) with a given, chosen nanostructure among three different morphologies (i.e., nanotubes, nanofibers and urchins). This approach exploits the variability of MnO morphologies and its versatility as sacrificial template. The morphological evolution for this template-assisted growth of PPy nanostructures has been briefly explained. These unique architectures significantly enhance the electroactive surface area of the PPy nanostructures, leading to better interfacial/chemical distribution at the nanoscale, fast ion and electron transfer and good strain accommodation. Thus, when used as supercapacitor electrodes, a maximum specific capacitance of 604 F/g at a current density of 1.81 A/g was reached for PPy nanofibers. Even after more than 1000 cycles at 9 A/g, a capacitance of 259 F/g with 91% retention was achieved. Moreover, the same PPy nanofibers can be used as cathode material for lithium-ion batteries (LIBs), showing a capacity of 70.82 mAh/g at a rate of 0.10 C with good cycling stability and rate capability. Our results provide sound evidences that PPy nanostructures can be properly tuned and make the difference for the practical application of these materials in electrochemical energy storage devices., Authors appreciate the award to DPD with the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Co-fund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union and the award of Humboldt Fellowship of the Alexander von Humboldt Foundation (AvH), Germany. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly dispersible and stable anionic boron cluster-graphene oxide nanohybrids

  • Cabrera-González, Justo
  • Cabana, Laura
  • Ballesteros, Belén
  • Tobias, Gerard
  • Núñez Aguilera, Rosario
An efficient process to produce boron cluster-graphene oxide nanohybrids that are highly dispersible in water and organic solvents is established for the first time. Dispersions of these nanohybrid materials in water were extraordinarily stable after one month. Characterization of hybrids after grafting of appropriate cobaltabisdicarbollide and closo-dodecaborate derivatives onto the surface of graphene oxide (GO) was done by FT-IR, XPS, and UV/Vis. Thermogravimetric analysis (TGA) clearly shows a higher thermal stability for the modified-GO nanohybrids compared to the parent GO. Of particular note, elemental mapping by energy-filtered transmission electron microscopy (EFTEM) reveals that a uniform decoration of the graphene oxide surface with the boron clusters is achieved under the reported conditions. Therefore, the resulting nanohybrid systems show exceptional physico-chemical and thermal properties, paving the way for an enhanced processability and further expanding the range of application for graphene-based materials., This work has been suppo rted by Ministerio de Economía y Competitividad, (MINECO; CTQ2013-44670-R, MAT2014-53500-R) and Generalitat de Catalunya (2014/SGR/149). J.C.-G. thanks the CSIC for an intramural grant. ICMAB and ICN2 acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2013-0295). J.C.G. is enrolled in the UAB Ph.D. program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà, Albert
  • Alcobé, Xavier
  • Sort, Jordi
  • Nogués, Josep
  • Vallés, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade these types of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown using ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electrocatalysis. Additionally, these nanowires also present exceptional conventional catalytic activity when used in conjunction with NaBH, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents., This work was supported by the EU ERDF (FEDER) fund and the Spanish Government grants TEC2014-51940-C2-2-R and MAT2014-57960-C3-1-R from Ministerio de Economía y Competitividad (MINECO) –the latter cofinanced by FEDER. Partial funding from the European Research Council (Consolidator Grant, project n. 648454, SPIN-PORICS) and the Generalitat de Catalunya (2014-SGR-1015 project) is acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed