Pasar al contenido principal

THEORY OF MOLECULAR ARCHITECTURES FOR ELECTRONIC, OPTICAL AND MAGNETIC SENSING

PID2022-140845OB-C66

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION DONOSTIA INTERNATIONAL PHYSICS CENTER

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On-surface synthesis of porous graphene nanoribbons mediated by phenyl migration

  • Moreno, Cesar|||0000-0003-2682-211X
  • Diaz de Cerio, Xabier|||0000-0002-2389-1905
  • Tenorio Tuñas, Maria|||0000-0002-0632-1636
  • Gao, Fei
  • Vilas-Varela, Manuel|||0000-0002-6768-5441
  • Sarasola, Ane
  • Peña, Diego|||0000-0003-3814-589X
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Mugarza, Aitor|||0000-0002-2698-885X
Advancements in the on-surface synthesis of atomically precise graphene nanostructures are propelled by the introduction of innovative precursor designs and reaction types. Until now, the latter has been confined to cross-coupling and cyclization reactions that involve the cleavage of specific atoms or groups. In this article, we elucidate how the migration of phenyl substituents attached to graphene nanoribbons can be harnessed to generate arrays of [18]-annulene pores at the edges of the nanostructures. This sequential pathway is revealed through a comprehensive study employing bond-resolved scanning tunneling microscopy and ab-initio computational techniques. The yield of pore formation is maximized by anchoring the graphene nanoribbons at steps of vicinal surfaces, underscoring the potential of these substrates to guide reaction paths. Our study introduces a new reaction to the on-surface synthesis toolbox along with a sequential route, altogether enabling the extension of this strategy towards the formation of other porous nanostructures.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of a non-planar cyclophenylene on Au(111)

  • Salaverría Bugallo, Sergio
  • Irizar Landa, Martín
  • Janeiro Rodríguez, Jesús
  • Angulo Portugal, Paula
  • Wang, Tao
  • Calupitan, Jan Patrick
  • Rodríguez Fernández, Jonathan
  • García Lekue, Aran
  • Corso, Martina
  • Artacho, Emilio
  • Peña Gil, Diego
  • Pérez Meirás, María Dolores
  • Oteyza, Dimas G. de
The article reports the surface-assisted synthesis of a non-planar cyclophenylene derivative containing four meta- and two para-connected phenylene moieties on Au(111), via hierarchical Ullmann coupling of a 1,10 dibrominated angular [3]phenylene and subsequent C–C bond cleavage at the four-membered rings. Scanning tunneling microscopy and spectroscopy (STM/STS) were used for the characterization of its chemical structure and electronic properties. Density functional theory (DFT) calculations support the experimental observations
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Tribological Improvement of Sunflower Lubricants Using Different Surface Modified Graphene Additives

  • Liñeira del Río, José Manuel
  • Martínez, Adrián
  • Sanjurjo Muñiz, Claudia
  • Peña, Diego
  • Hernández Battez, Antolin
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The use of mineral lubricants has been demonstrated to be detrimental to the environment. Consequently, there has been a shift toward the utilization of biodegradable lubricants, such as those derived from vegetable sources. The last ones necessitate the incorporation of additives to attain optimal anti-friction and anti-wear characteristics, with nanoparticles emerging as particularly suitable candidates due to their exceptional properties. However, they have the significant limitation that they sediment in the fluid, making their chemical modification to achieve good stability a challenge. Thus, the objective of this work is analyzing the antifriction and antiwear properties of sunflower nanolubricants that contain sunflower oil and graphene oxide (GO), alkylated hexadecanol graphene oxide (GO-HD) and alkylated sulfur-doped graphene oxide (GO-SA) nanoparticles. Slight enhancements in friction were observed compared to sunflower oil, with a maximum 11 % reduction for GO-HD (0.10 wt%). With regard to anti-wear behavior, GO-HD and GO-SA nanolubricants exhibited outstanding performance, with maximum worn volume reductions of 44 % and 36 %, respectively. Finally, through Raman spectroscopy and scanning electron microscopy the tribofilm formation as tribological mechanism responsible for tribological improvement was observed., This research is supported by Xunta de Galicia (ED431C 2020/10 and ED431G 2019/03), by MCIN/AEI/10.13039/501100011033 through PID2022–140845OB-C62 project. JMLdR is grateful for financial support through the Margarita Salas program, funded by MCIN/AEI/10.13039/501100011033 and "NextGenerationEU/PRTR", for the financial support of Xunta de Galicia and Campus Industrial de Ferrol through the Talento Investigador program and also for the funding of open access charge: Universidade da Coruña / CISUG, Xunta de Galicia; ED431C 2020/10, Xunta de Galicia; ED431G 2019/03
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

B and N substitutional co-doping in 7AGNRs

  • Menchón, Rodrigo E.
  • Delgado-Enales, Iñigo
  • Sánchez-Portal, Daniel
  • Garcia-Lekue, Aran
On-surface synthesis of graphene nanoribbons enables engineering their electronic and magnetic properties, which sensitively depend on their precise bonding structure, morphology and chemical composition. Here, we investigate nitrogen and boron co-doping in order to better understand the effects of simultaneous chemical substitution in sites along the backbone of 7AGNRs. In a comparative analysis with the pristine system, the origin of the impurity bands that nitro-borylated systems exhibit was addressed. In addition to this, we studied the appearance of an electric dipolar moment, the charge transfer mechanism behind it and its dependence on the distance between BN centres. The high defect concentration limit and the dilute limit were investigated, along with various doping schemes with four substitutional doping sites and the possible emergence of magnetism in these systems., This work was supported by grant PID2019-107338RB-C66 funded by MCIN/AEI/10.13039/501100011033, grant TED2021-132388B-C44 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea Next Generation EU/PRTR, grant PID2022-140845OB-C66 funded by MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa, the European Union H2020 program through the FET Open project SPRING (Grant Agreement No. 863098) and the Basque Department of Education (IT1569-22). The authors also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kondo effect of co-porphyrin: Remarkable sensitivity to adsorption sites and orientations

  • Meng, Xiangzhi
  • Möller, Jenny
  • Menchón, Rodrigo E.
  • Weismann, Alexander
  • Sánchez-Portal, Daniel
  • Garcia-Lekue, Aran
  • Herges, Rainer
  • Berndt, Richard
We investigated the Kondo effect of cobalt(II)-5-15-bis(4′-bromophenyl)-10,20-bis(4′-iodophenyl)porphyrin (CoTPPBr2I2) molecules on Au(111) with low-temperature scanning tunneling microscopy under ultrahigh vacuum conditions. The molecules exhibit four adsorption configurations at the top and bridge sites of the surface with different molecular orientations. The Kondo resonance shows extraordinary sensitivity to the adsorption configuration. By switching the molecule between different configurations, the Kondo temperature is varied over a wide range from ≈8 up to ≈250 K. Density functional theory calculations reveal that changes of the adsorption configuration lead to distinct variations of the hybridization between the molecule and the surface. Furthermore, we show that surface reconstruction plays a significant role for the molecular Kondo effect., This work was supported by grant PID2019-107338RB-C66 funded by MCIN/AEI/10.13039/501100011033, grant TED2021-132388B-C44 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea Next Generation EU/PRTR, grant PID2022-140845OB-C66 funded by MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa, the European Union H2020 program through the FET Open project SPRING (Grant Agreement No. 863098) and the Basque Department of Education (IT1569-22). The authors also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATA_Influence_of_atomistic_features

  • Candelas, Bruno
  • Zabala, Nerea
  • Koval, Peter
  • Babaze, Antton
  • Sánchez-Portal, Daniel
  • Aizpurua, Javier
The files contain the numerical data of the figures of the article "Influence of atomistic features in plasmon-exciton coupling and charge transfer driven by a single molecule in a metallic nano cavity". Journal: The Journal of Chemical Physics. The data files are organized in different folders and subfolders corresponding to each of the figures in the paper and the supplementary material. The details of the files and the information contained in each folder are explained in a particular README.txt file within the folder. [Description of methods used for collection/generation of data] Explained in the README files in the folder., The dataset includes the numerical data presented in J. Chem Phys. 161 (2024); "Influence of atomistic features in plasmon-exciton coupling and charge transfer driven by a single molecule in a metallic nano cavity", written by Bruno Candelas, Nerea Zabala, Peter Koval, Anton Babaze, Daniel Sánchez-Portal, and Javier Aizpurua (doi: 10.1063/5.0216464). The dataset is organized into folders according to the explanation in the README file, and each folder contains .txt files of the data for each of the figures indicated on its name, together with README instructions on each case., MCIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe", Grants PID2022-139579NB-I00 and PID2022-140845OB-C66; Basque Government (Projects No. IT 1526-22 and IT1569-22 for consolidated groups of the Basque University)., See the README in the folders, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Footprints of atomic-scale features in plasmonic nanoparticles as revealed by electron energy loss spectroscopy

  • Urbieta, Mattin
  • Barbry, Marc
  • Koval, Peter
  • Rivacoba, Alberto
  • Sánchez-Portal, Daniel
  • Aizpurua, Javier
  • Zabala, Nerea
We present a first-principles theoretical study of the atomistic footprints in the valence electron energy loss spectroscopy (EELS) of nanometer-size metallic particles. Charge density maps of excited plasmons and EEL spectra for specific electron paths through a nanoparticle (Na380 atom cluster) are modeled using ab initio calculations within time-dependent density functional theory. Our findings unveil the atomic-scale sensitivity of EELS within this low-energy spectral range. Whereas localized surface plasmons (LSPs) are particularly sensitive to the atomistic structure of the surface probed by the electron beam, confined bulk plasmons (CBPs) reveal quantum size effects within the nanoparticle's volume. Moreover, we prove that classical local dielectric theories mimicking the atomistic structure of the nanoparticles reproduce the LSP trends observed in quantum calculations, but fall short in describing the CBP behavior observed under different electron trajectories., Financial support from Project No. PID2022-139579NB-I00 of MICIN, project of the Basque Department of Education (Grant No. IT1526-22) are acknowledged. M. U. acknowledges support from DIPC and CFM. D. S. P. acknowledges support from Grants PID2019-107338RB-C66 and PID2022-140845OB-C66 funded by MCIN/AEI/10.13039/501100011033, and the Basque Department of Education (Grant IT1569-22). M. B. acknowledges support from the Departamento de Educación of the Basque Government through a PhD grant, as well as from Euskampus and the DIPC at the initial stages of this work. P. K. acknowledges financial support from the Fellows Gipuzkoa program of the Gipuzkoako Foru Aldundia through the FEDER funding scheme of the European Union, “Una manera de hacer Europa”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of atomistic features in plasmon-exciton coupling and charge transfer driven by a single molecule in a metallic nanocavity

  • Candelas, Bruno
  • Zabala, Nerea
  • Koval, Peter
  • Babaze, Antton
  • Sánchez-Portal, Daniel
When an organic molecule is placed inside a plasmonic cavity formed by two metallic nanoparticles (MNP) under illumination, the electronic excitations of the molecule couple to the plasmonic electromagnetic modes of the cavity, inducing new hybrid light–matter states called polaritons. Atomistic ab initio methods accurately describe the coupling between MNPs and molecules at the nanometer scale and allow us to analyze how atomistic features influence the interaction. In this work, we study the optical response of a porphine molecule coupled to a silver nanoparticle dimer from first principles, within the linear-response time-dependent density functional theory framework, using the recently developed Python Numeric Atomic Orbitals implementation to compute the optical excitations. The optical spectra show the splitting of the resonances of the plasmonic dimer and the molecule into two distinct polaritons, a characteristic feature of the strong light–matter coupling regime. Our results stress the importance of atomistic features, such as the gap configuration in determining the plasmon–exciton coupling strength and in the emergence of molecule-mediated charge-transfer plasmon (CTP) resonances at lower frequencies. Moreover, we show that the strength of the CTP resonance can be tuned by shifting the alignment of the molecular energy levels with respect to the Fermi level of the MNPs., B.C. acknowledges support through the Ph.D. Student program of Materials Physics Center and Donostia International Physics Center. We also acknowledge support through Grant No. IT 1526-22 funded by the Department of Education, Research and Universities of the Basque Government, and Grant No. PID2022-139579NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. D.S.-P. acknowledges support through Grant No. IT 1569-22 funded by the Department of Education, Research and Universities of the Basque Government and Grant No. PID2022-140845OB-C66 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface synthesis of porous graphene nanoribbons mediated by phenyl migration

  • Moreno, César
  • Díaz de Cerio, Xabier
  • Tenorio, Maria
  • Gao, Fei
  • Vilas-Varela, Manuel
  • Sarasola, Ane
  • Peña, Diego
  • Garcia-Lekue, Aran
  • Mugarza, Aitor
Advancements in the on-surface synthesis of atomically precise graphene nanostructures are propelled by the introduction of innovative precursor designs and reaction types. Until now, the latter has been confined to cross-coupling and cyclization reactions that involve the cleavage of specific atoms or groups. In this article, we elucidate how the migration of phenyl substituents attached to graphene nanoribbons can be harnessed to generate arrays of [18]-annulene pores at the edges of the nanostructures. This sequential pathway is revealed through a comprehensive study employing bond-resolved scanning tunneling microscopy and ab-initio computational techniques. The yield of pore formation is maximized by anchoring the graphene nanoribbons at steps of vicinal surfaces, underscoring the potential of these substrates to guide reaction paths. Our study introduces a new reaction to the on-surface synthesis toolbox along with a sequential route, altogether enabling the extension of this strategy towards the formation of other porous nanostructures., This research was funded by the CERCA Programme/Generalitat de Catalunya and supported by the Spanish Ministry of Economy and Competitiveness, MINECO under Contract No. SEV-2017-0706), Grant Nos. CEX2021-001214-S, PID2022-140845OB-C62, PID2022-140845OB-C63, PID2022-140845OB-C66, PGC2018-096955-B-C43, TED2021-132388B-C41 and TED2021-132388B-C42 funded by MCIN/AEI /10.13039/501100011033, PID2022-140827OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, the European Union (EU) H2020 program through the FET Open project SPRING (Grant Agreement No. 863098), the FLAG-ERA grant LEGOCHIP (AEI/10.13039/501100011033 Grants No. PCI2019-111890-2 and PCI-111933-2), and Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019-2022, ED431G 2019/03). This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. X.D.d.C., F.G., A.S., and A.G.-L. acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government. C.M. was supported by Grant RYC2019- 028110-I funded by MICIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”. M.T. has been supported by Spanish State Research Agency/FSE (ref. BES-2017-08078, project ref. SEV-2013-0295-17-2)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

[19]Starphene: Combined in-solution and on-surface synthesis towards the largest starphene

  • Besteiro-Sáez, Javier
  • Mateo, Luis M.
  • Salaverría, Sergio
  • Wang, Tao
  • Angulo Portugal, Paula
  • Calupitan, Jan Patrick
  • Rodríguez-Fernández, Jonathan
  • García-Fuente, Amador
  • Ferrer, Jaime
  • Pérez, Dolores
  • Corso, Martina
  • Oteyza, Dimas G. de
  • Peña, Diego
Starphenes are structurally appealing three-fold symmetric polycyclic aromatic compounds with potential interesting applications in molecular electronics and nanotechnology. This family of star-shaped polyarenes can be regarded as three acenes that are connected through a single benzene ring. In fact, just like acenes, unsubstituted large starphenes are poorly soluble and highly reactive molecules under ambient conditions making their synthesis difficult to achieve. Herein, we report two different synthetic strategies to obtain a starphene formed by 19 cata-fused benzene rings distributed within three hexacene branches. This molecule, which is the largest starphene that has been obtained to date, was prepared by combining solution-phase and on-surface synthesis. [19]Starphene was characterized by high-resolution scanning tunneling microscopy (STM) and spectroscopy (STS) showing a remarkable small HOMO-LUMO transport gap (0.9 eV)., The authors gratefully acknowledge financial support from Spanish MCIN/AEI/ 10.13039/501100011033 and the European Regional Development Fund (ERDF) through grants PID2022-140845OB-C6, PID2022-139933NB-I00 and PID2022-137078NB-100, from the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant. no. 863098), ERC SyG MolDAM (951519) and MSCA Postdoctoral Fellowship (Grant Agreement No. 101153230 to JPC), and from Xunta de Galicia (Centro de Investigación do Sistema Universitario de Galicia, 2023–2027, ED431G 2023/03)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of a non-planar cyclophenylene on Au(111)

  • Salaverría, Sergio
  • Irizar, Martin
  • Janeiro, Jesús
  • Angulo Portugal, Paula
  • Wang, Tao
  • Calupitan, Jan Patrick
  • Rodríguez-Fernández, Jonathan
  • Garcia-Lekue, Aran
  • Corso, Martina
  • Artacho, Emilio
  • Peña, Diego
  • Pérez, Dolores
  • Oteyza, Dimas G. de
We report the surface-assisted synthesis of a non-planar cyclophenylene derivative containing four meta- and two para- connected phenylene moieties on Au(111), via hierarchical Ullmann coupling of a 1,10-dibrominated angular [3] phenylene and subsequent C-C bond cleavage at the four-membered rings. Scanning tunneling microscopy and spectroscopy (STM/STS) were used for the characterization of its chemical structure and electronic properties. Density functional theory (DFT) calculations support the experimental observations., This work was supported by grants PID2022-140845OB−C62, PID2022-140845OB−C64, PID2022-140845OB−C66 and PID2022-139933NB−I00, funded by the Spanish MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa. We also acknowledge grants TED2021-132388B−C43 and TED2021-132388B−C44, funded by the Spanish MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. Further support is acknowledged from the European Union Horizon2020 through FET-Open Project SPRING (Grant No. 863098) and ERC Synergy Grant MolDAM (951519), the Xunta de Galicia (Centro de investigación do Sistema universitario de Galicia accreditation 2023–2027, ED431G 2023/03) and the European Union (European Regional Development Fund - ERDF). A.G−L also acknowledges the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government. E.A. further acknowledges a María de Maeztu award to Nanogune, Grant No. CEX2020-001038-M, funded by MCIN/AEI/10.13039/501100011033, and the Quantum Sense project of the Diputación General de Gipuzkoa. JJ thanks the AEI for the award of a pre-doctoral fellowship (PRE2020-092897)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong in-plane magnetic anisotropy in semiconducting monolayer CoCl2

  • Kerschbaumer, Samuel
  • Hadjadj, Sebastien E.
  • Aguirre Baños, Andrea
  • Longo, Danilo
  • Pinar Solé, Andrés
  • Stetsovych, Oleksandr
  • Candia, Adriana E.
  • Angulo Portugal, Paula
  • Caldevilla, David
  • Choueikani, Fadi
  • Corso, Martina
  • Serrate, David
  • Lobo-Checa, Jorge
  • Jelinek, Pavel
  • Ilyn, Max
  • Rogero, Celia
Transition-metal dihalides (TMDH) are emerging as a highly promising class of 2D magnetic materials due to their simplicity, stability, and compatibility with nanofabrication techniques. In this work, we explore the structural, electronic, and magnetic properties of monolayer CoCl2 grown epitaxially on Au(111) using a multitechnique approach. Our results reveal that epitaxial CoCl2 exhibits ferromagnetic order below 24 K with strong in-plane magnetic anisotropy, setting it apart from other TMDH materials. Additionally, we identify in-gap states arising from the CoCl2–Au(111) interface, which provide insights into its electronic behavior. These findings position CoCl2 as a versatile 2D material for spintronic applications and nanoscale devices, bridging the gap between fundamental research and real-world technological solutions., The authors gratefully acknowledge the financial support by the Spanish MCIU/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR (Grant Nos. PID2020-114252GB-I00, PID2022-140845OB-C6, PID2022-138750NB-C21, PID2022-138750NB-C22, PID2022-140845OB-C65, TED2021-132388B-C43, TED2021-130292B-C42, the scholarship PRE2020-093355, and the scholarship PRE-2021-1-0350), the Basque Government INKER EC-2024-1-0010, IT1591-22, from the regional Governments of Aragon (E12-23R), the Spanish Research Council CSIC through I-LINK C20002, and the IKUR Strategy (HPC-IA and QT 2023–2025) under the collaboration agreement between Ikerbasque Foundation, MPC, and DIPC on behalf of the Department of Education of the Basque Government. We also acknowledge the financial support of Czech Science Foundation GACR 20-13692X and CzechNanoLab Research Infrastructure supported by MEYS CR LM2023051. We further acknowledge the use of Servicio General de Apoyo a la Investigación-SAI and the Laboratorio de Microscopías Avanzadas of the Universidad de Zaragoza. We also thank beamline DEIMOS and Synchrotron Soleil for the opportunity of performing XAS/XMCD measurements. S.K. acknowledges funding of the Ph.D. fellowship from the MPC Asociación. D.L. acknowledges the MSCA project QMOLESR (Project Number: 101064332)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced one-dimensional magnetic stripe in metallic monolayer H-NbSe2

  • Jia, Liangguang
  • Zhang, Ca
  • Gao, Fei
  • Chen, Yaoyao
  • Zhou, Lili
  • Zhou, Fudi
  • Han, Xu
  • Zhang, Teng
  • Sánchez-Portal, Daniel
  • Gao, Shiwu
Lattice distortion of materials has a profound impact on their electronic and magnetic properties, which can generate local magnetic states in intrinsically non-magnetic systems. Here we report on the realization of a one-dimensional (1D) magnetic stripe in monolayer H-NbSe2 sustained by strain along the terraces of the graphene/SiC substrates. The strength of this tensile strain is widely tunable by the height-to-width ratio of the terraces. Increasing the tensile strength leads to the shifts and splitting of the Nb 4d bands crossing the Fermi energy, generating spin polarization in a 1D magnetic stripe along the terrace. Simultaneously, the charge-density-wave signature of strained H-NbSe2 is significantly suppressed. Such a magnetic stripe can be locally quenched by an individual Se-atom defect via the defect-induced Jahn–Teller distortion and charge density redistribution. These findings provide a different route to achieving and manipulating 1D magnetism in otherwise non-magnetic systems, offering a new way for spintronic devices., This work was supported by the National Key R&D Program of China (Grant Nos. 2022YFA1402602, 2022YFA1402502, 2021YFA1400103, 2020YFA0308802, and 2024YFA1611300), the National Natural Science Foundation of China (Grant Nos. 92163206, 12274026, 12321004, 12304205, 11934003, 12393831, and U2230402), Beijing Association for Science and Technology Youth Talent Lift Program, MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-140845OB-C66), and FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic excitations of isolated and interconnected complexes on a superconductor

  • Meng, Xiangzhi
  • Möller, Jenny
  • Irizar, Martin
  • Sánchez-Portal, Daniel
  • Garcia-Lekue, Aran
  • Weismann, Alexander
  • Herges, Rainer
  • Berndt, Richard
The magnetic complex Fe(II) porphyrin was studied on superconducting Pb(100). Low-temperature scanning tunneling microscopy was performed on isolated molecules and molecular networks prepared via Ullmann coupling. Isolated molecules adopt two distinct adsorption configurations with different magnetic excitations, namely, Yu-Shiba-Rusinov states and spin excitations. They may be understood in terms of their different magnetic anisotropies and exchange couplings with the substrate, as illustrated by the density functional theory calculations. In networks, strong intermolecular interactions lead to diverse structures with distinct magnetic and electronic properties. This work demonstrates a degree of control over the magnetic quantum states of a molecular complex on a superconductor., X.M. acknowledges support by Kiel Nano, Surface and Interface Science (KiNSIS). M.I., D.S.-P., and A.G.-L. acknowledge financial support from Grant PID2022-140845OB-C66 funded by MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa and grant IT-1569-22 funded by the University of the Basque Country (EHU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A functional 2D carbon allotrope combining Nanoporous graphene and biphenylene segments

  • Angulo Portugal, Paula
  • Irizar, Martin
  • Huang, Longfeng
  • Sarker, Mamun
  • Ashoush, Mustafa A.
  • Abd El-Fattah, Zakaria M.
  • Barth, Johannes V.
  • Schiller, Frederik
  • El-Sayed, Afaf
  • Gao, Fei
  • Oteyza, Dimas G. de
  • Sinitsa, Alexander S.
  • Garcia-Lekue, Aran
  • Corso, Martina
  • Piquero-Zulaica, Ignacio
The data that supports the findings of this paper are available from the corresponding authors upon request., The implementation of graphene in semiconductor technology requires bandgap tuning, which can be achieved by chemical doping, geometric confinement in nanoribbons or with the insertion of nanopores and non-hexagonal rings. The bottom-up on-surface synthesis approach in ultra-high vacuum allows for the synthesis of atomically well-defined graphene or biphenylene nanoribbons and nanoporous graphene (NPG) structures suitable for device applications. Here, a novel 2D carbon allotrope is synthesized in the form of a functional NPG with periodically spaced biphenylene segments. First, 12-armchair porous graphene nanoribbons (12-pGNRs) on Au(111) and Au(788) using 7,10-dibromo-1,4-diphenyl-triphenylene (DBDT) molecular precursor are grown. Low-temperature scanning tunneling microscopy/spectroscopy (LT-STM/STS) and non-contact atomic force microscopy (nc-AFM) measurements reveal the presence of high-quality semiconducting 12-pGNRs. Thermal annealing of densely packed 12-pGNRs at 550 °C triggers their lateral fusion into diverse NPG structures featuring either graphene-type or biphenylene-type junctions. The structural and electronic properties are again characterized by LT-STM and nc-AFM in combination with density functional theory (DFT) calculations. DFT shows that while graphene-type NPGs are direct bandgap semiconductors, biphenylene-type NPGs manifest a smaller and indirect bandgap. The NPGs are stable upon oxygen and air exposure, and the nanopores feature a noticeable affinity to carbon monoxide, making them appealing systems for chemical sensors., This work was supported by Grants PID2022-140845OB-C66, PID2022-140845OB-C64, PID2022-140845OB-C65, PID2023-149158OB-C44 funded by the Spanish MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa. The authors also acknowledge Grants TED2021-132388B-C43 and TED2021-132388B-C44, funded by the Spanish MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. The work was also supported by the Basque Government (IT1591-22) and by Red Guipuzcoana de Ciencia, Tecnología e Innovación programme of the Gipuzkoa Provincial Council. J.B. and I.P.-Z. acknowledge funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – 531278475. The synthesis of DBDT by M.S. and A.S. was supported by the Office of Naval Research (N00014-19-1-2596)., Peer reviewed