Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel sensor for monitoring of iron (III) ions based on porphyrins

  • Vlascici, Dana
  • Fagadar-Cosma, Eugenia
  • Popa, Iuliana
  • Chiriac, Vlad
  • Gil Agustí, María Teresa
[EN] Three A3B porphyrins with mixed carboxy-, phenoxy-, pyridyl- and dimethoxysubstituent functionalization on the meso-phenyl groups were obtained by multicomponent synthesis, fully characterized and used as ionophores for preparing PVC-based membrane sensors selective to iron(III). The membranes have an ionophore:PVC:plasticizer composition ratio of 1:33:66. Sodium tetraphenylborate was used as additive (20 mol% relative to ionophore). The performance characteristics (linear concentration range, slope and selectivity) of the sensors were investigated. The best results were obtained for the membrane based on 5-(4-carboxyphenyl)-10,15,20-tris(4-phenoxyphenyl)-porphyrin plasticized with bis(2-ethylhexyl)sebacate, in a linear range from 1 × 10−7 –1 × 10−1 M with a slope of 21.6 mV/decade. The electrode showed high selectivity with respect to alkaline and heavy metal ions and a response time of 20 s. The influence of pH on the sensor response was studied. The sensor was used for a period of six weeks and the utility has been tested for the quantitative determination of Fe(III) in recovered solutions from spent lithium ion batteries and for the quantitative determination of Fe(III) in tap water samples., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 266090 (SOMABAT), Romanian PNCDI2 Program-Module III-EU 128/2011 and is a result of collaboration between the coauthors within the project POSDRU/21/1.5/G/38347.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous synthesis of LiFePO4 with fractal granularity

  • Caban-Huertas, Zahilia
  • Ayyad, Omar
  • Dubal, Deepak P.
  • Gómez-Romero, P.
Lithium iron phosphate (LiFePO4) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consisted of nanoparticles grown into larger micro-sized formations which in turn agglomerate leading to high tap density electrodes, which is beneficial for energy density. These intricate structures could be easily and effectively coated with a thin and uniform carbon layer for increased conductivity, as it is well established for simpler microstructures. Materials and electrodes were studied by means of XRD, SEM, TEM, SAED, XPS, Raman and TGA. Last but not least, lithium transport through fractal LiFePO4 electrodes was investigated based upon fractal theory. These water-made fractal electrodes lead to high-performance lithium cells (even at high rates) tested by CV and galvanostatic charge-discharge, their performance is comparable to state of the art (but less environmentally friendly) electrodes., Funding from the E C Seventh Framework program (FP7/2007-2013) under grant Agreement 266090 (SOMABAT) is gratefully acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Authors appreciate the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) for Catalan system of science and technology, Spain. We thank AGAUR (Generalitat de Catalunya) for project NESTOR Nanomaterials for Energy STORage. 2014_SGR_1505., EUR 1,165 APC fee funded by the EC FP7 Post-Grant Open Access Pilot, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Alternative approaches for the fabrication of electrodes based on LiFePO4 as cathode in LIBs

  • Caban-Huertas, Zahilia
Lithium ion batteries are the power sources of choice for portable electronics, power tools and electric base transportation and they are ready to take over other niche and mainstream applications (from wearables to smart grid support to electric vehicles). Yet, this implies new requirements such as a combination of high energy and power densities, longer cycling life and, last but not least, substantially reduced costs. Most of the work presented in this thesis consisting of the optimization of low-cost and ecofriendly methods for the preparation of LiFePO4 (LFP) and the development of nanostructured and hybrid composites based on this cathode material and conductive polymers or conductive nanocarbons like graphene. Indeed, olivine-type LFP has been recognized as one of the most promising cathode materials for rechargeable Li batteries. Its advantages include high capacity, high stability, nontoxicity, and low cost. In order to overcome the well-known insulating nature of LFP, different methods, alternative to the conventional carbon-coating, were proposed and tested. We used low-temperature, low cost and environmental methods for synthesizing nanocrystalline LixFePO4 with the olivine structure and different morphologies and microstructures are described. As an alternative design of LFP electrodes, we developed electroactive LFP nanofluids based on the solid samples described before with the intention to use them as part of novel redox flow cells., I gratefully acknowledge the financial support of the ICN2 through my studies. I appreciate the financial support of the European Commission under grant agreement. 266090 (SOMABAT)., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Aqueous synthesis of LiFePO4 with Fractal Granularity

  • Cabán Huertas, Zahilia
  • Ayyad, Omar
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Lithium iron phosphate (LiFePO) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consisted of nanoparticles grown into larger micro-sized formations which in turn agglomerate leading to high tap density electrodes, which is beneficial for energy density. These intricate structures could be easily and effectively coated with a thin and uniform carbon layer for increased conductivity, as it is well established for simpler microstructures. Materials and electrodes were studied by means of XRD, SEM, TEM, SAED, XPS, Raman and TGA. Last but not least, lithium transport through fractal LiFePO electrodes was investigated based upon fractal theory. These water-made fractal electrodes lead to high-performance lithium cells (even at high rates) tested by CV and galvanostatic charge-discharge, their performance is comparable to state of the art (but less environmentally friendly) electrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Capacitive vs Faradaic Energy Storage in a Hybrid Cell with LiFePO4/RGO Positive Electrode and Nanocarbon Negative Electrode

  • Cabán Huertas, Zahilia
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Ayyad, Omar
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report an advanced device based on a Nitrogen-doped Carbon Nanopipes (N-CNP) negative electrode and a lithium iron phosphate (LiFePO) positive electrode. We carefully balanced the cell composition (charge balance) and suppressed the initial irreversible capacity of the anode in the round of few cycles.We demonstrated an optimal performance in terms of specific capacity 170 mAh/g of LiFePO with energy density of about 203 Wh kg and a stable operation for over 100 charge-discharge cycles. The components of this device (combining capacitive and faradaic electrodes) are low cost and easily scalable. This device has a performance comparable to those offered by the present technology of LIBs with the potential for faster charging; hence, we believe that the results disclosed in this work may open up new opportunities for energy storage devices.