Pasar al contenido principal

NANOFLUIDOS BASADOS EN CARBONES CON MICROESTRUCTURA OPTIMIZADA

MAT2015-68394-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

BiVO4 Fern Architectures, A Competitive Anode for Lithium-Ion Batteries

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Patil, Deepak R.
  • Patil, Santosh S.
  • Munirathnam, N. R.
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
The development of high-performance anode materials for lithium-ion batteries (LIBs) is currently subject to much interest. In this study, BiVO fern architectures are introduced as a new anode material for LIBs. The BiVO fern shows an excellent reversible capacity of 769 mAh g (ultrahigh volumetric capacity of 3984 mAh cm) at 0.12 A g with large capacity retention. A LIB full cell is then assembled with a BiVO fern anode and LiFePO (LFP, commercial) as cathode material. The device can achieve a capacity of 140 mAh g at 1C rate, that is, 81 % of the capacity of the cathode and maintained to 104 mAh g at a high rate of 8C, which makes BiVO a promising candidate as a high-energy anode material for LIBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fern-like rGO/BiVO4 hybrid nanostructures for high-energy symmetric supercapacitor

  • Patil, Santosh S.
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Deonikar, Virendrakumar G.|||0000-0001-6603-8333
  • Tamboli, Mohaseen S.|||0000-0003-1749-2681
  • Ambekar, Jalindar D.|||0000-0001-9844-2883
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Kolekar, Sanjay S.|||0000-0002-4367-6014
  • Kale, Bharat B.|||0000-0003-0556-9477
  • Patil, Deepak R.
Herein, we demonstrate the synthesis of rGO/BiVO hybrid nanostructures by facile hydrothermal method. Morphological studies reveal that rGO sheets are embedded in the special dendritic fern-like structures of BiVO. The rGO/BiVO hybrid architecture shows the way to a rational design of supercapacitor, since these structures enable easy access of electrolyte ions by reducing internal resistance. Considering the unique morphological features of rGO/BiVO hybrid nanostructures, their supercapacitive properties were investigated. The rGO/BiVO electrode exhibits a specific capacitance of 151 F/g at the current density of 0.15 mA/cm. Furthermore, we have constructed rGO/BiVO symmetric cell which exhibits outstanding volumetric energy density of 1.6 mW h/cm (33.7 W h/kg) and ensures rapid energy delivery with power density of 391 mW/cm (8.0 kW/kg). The superior properties of symmetric supercapacitor can be attributed to the special dendritic fern-like BiVO morphology and intriguing physicochemical properties of rGO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potassium Salts as Electrolyte Additives in Lithium-Oxygen Batteries

  • Landa, Imanol
  • Olivares, Mara
  • Bergner, Benjamin
  • Pinedo, Ricardo
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Ruiz de Larramendi, Idoia
  • Janek, Jürgen
  • Rojo, Teófilo
  • Tonti, Dino
The stabilization of the intermediates formed during oxygen reduction reaction and their efficient solubilization and diffusion is a crucial issue that needs to be improved in non-aqueous lithium oxygen batteries. By adding 0.1 M K+ (as KOTf salt) to the electrolyte we have observed remarkable improvements in the rate capability of the discharge process. The K+ cation facilitates a more homogeneous discharge product deposition in the porous cathode. Instead, as evidenced by synchrotron measurements, we find that K+ does not influence the cell chemistry, suggesting that it rather assists the superoxide solvation, thus enhancing the solution-based growth of the discharge products. In addition, if iodide (I-) is added as redox mediator we find an extended cycle life when K+ instead of Li+ is used as cation. This finding remarks the benefits of stabilizing the oxygen reduction products in the electrolyte leading to a solution-based mechanism., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), through projects MAT2013-41128-R, MAT2016-78266-P, MAT2015-68394-R, by the “Fondo Europeo de Desarrollo Regional” (FEDER), by the Eusko Jaurlaritza/Gobierno Vasco (through project IT-570-13), and by the Generalitat de Catalunya (grant 2014 SGR 1505). I. Landa-Medrano thanks the Universidad del País Vasco (UPV/EHU) for his predoctoral fellowship. M. Olivares-Marín acknowledges CSIC for a JAE-DOC research contract co-funded by the European Social Fund. J. Janek acknowledges financial support by BMBF (Federal Ministry of Education and Research) within the project BENCHBATT. The xray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electroactive graphene nanofluids for fast energy storage

  • Dubal, Deepak P.
  • Gómez-Romero, P.
Graphenes have been extensively studied as electrode materials for energy storage in supercapacitors and batteries, but always as solid electrodes. The conception and development of graphene electroactive nanofluids (ENFs) reported here for the first time provides a novel way to 'form' graphene electrodes and demonstrates proof of concept for the use of these liquid electrodes for energy storage in novel flow cells.Astabilized dispersion of reduced graphene oxide (rGO) in aqueous sulfuric acid solution was shown to have capacitive energy storage capabilities parallel to those of solid electrode supercapacitors (169 F g(rGO)) but working up to much faster rates (from 1mV s to the highest scan rate of 10 V s) in nanofluids with 0.025, 0.1 and 0.4 wt% rGO, featuring viscosities very close to that of water, thus being perfectly suitable for scalable flow cells. Our results provide proof of concept for this technology and include preliminary flow cell performance of rGO nanofluids under static and continuous flow conditions. Graphene nanofluids effectively behave as true liquid electrodes with very fast capacitive storage mechanism and herald the application not only of graphenes but also other 2D materials like MoS in nanofluids for energy storage and beyond., Authors acknowledge the award to DPD of a MarieCurie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV2013-0295. Also, partial funding from AGAUR (NESTOR project 2014-SGR-1505) and from Ministerio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fern-like rGO/BiVO4 hybrid nanostructures for high-energy symmetric supercapacitor

  • Patil, Santosh S.
  • Dubal, Deepak P.
  • Gómez-Romero, P.
  • Patil, Deepak R.
et al., Herein, we demonstrate the synthesis of rGO/BiVO hybrid nanostructures by facile hydrothermal method. Morphological studies reveal that rGO sheets are embedded in the special dendritic fern-like structures of BiVO. The rGO/BiVO hybrid architecture shows the way to a rational design of supercapacitor, since these structures enable easy access of electrolyte ions by reducing internal resistance. Considering the unique morphological features of rGO/BiVO hybrid nanostructures, their supercapacitive properties were investigated. The rGO/BiVO electrode exhibits a specific capacitance of 151 F/g at the current density of 0.15 mA/cm. Furthermore, we have constructed rGO/BiVO symmetric cell which exhibits outstanding volumetric energy density of 1.6 mW h/cm (33.7 W h/kg) and ensures rapid energy delivery with power density of 391 mW/cm (8.0 kW/kg). The superior properties of symmetric supercapacitor can be attributed to the special dendritic fern-like BiVO morphology and intriguing physicochemical properties of rGO., B.B.K. and D.R.P. thank the Ministry of Electronics and Information Technology (MeitY, New Delhi, India) and the INSPIRE faculty program (DST, New Delhi) for their financial support. D.P.D. and P.G.-R. acknowledge partial support from the Spanish Miisterio MINECO (Grant MAT2015-68394-R, MINECO/FEDER) and the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Co-fund programme of the Marie Curie Actions of the seventh R&D Framework Programme of the European Union. DPD and PGR also acknowledge AGAUR (Generalitat de Catalunya) for Project NESTOR (Nanomaterials for Energy STORage) 2014_SGR_1505., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalization of polypyrrole nanopipes with redox-active polyoxometalates for high energy density supercapacitors

  • Dubal, Deepak P.
  • Ballesteros, Belén
  • Mohite, Ashwini A.
  • Gómez-Romero, P.
Hybrid materials are very attractive for the fabrication of high-performance supercapacitors. Here, we have explored organic–inorganic hybrid materials based on open-end porous 1 D polypyrrole nanopipes (PPy-NPipes) and heteropolyoxometalates (phosphotungstate ([PWO], PW) or phosphomolybdate ([PMoO], PMo)) that display excellent areal capacitances. Two different hybrid materials (PMo@PPy and PW@PPy) were effectively synthesized and used for symmetric supercapacitors. The anchoring of the inorganic nanoclusters onto the conducting polymer nanopipes led to electrodes that stood up to our best expectations exhibiting outstanding areal capacitances that are almost 1.5 to 2 fold higher than that of pristine PPy-NPipes. In addition, symmetric cells based on PMo@PPy and PW@PPy hybrid electrodes were fabricated and showed significant improvement in cell performance with very high volumetric capacitances in the range of 6.3–6.8 F cm (considering the volume of whole device). Indeed, they provide extended potential windows in acidic electrolytes (up to 1.5 V) which led to ultrahigh energy densities of 1.5 and 2.2 mWh cm for PMo@PPy and PW@PPy cells, respectively. Thus, these unique organic-inorganic hybrid symmetric cells displayed extraordinary electrochemical performances far exceeding those of more complex asymmetric systems., Partial funding from Ministerio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) and from AGAUR (project NESTOR, Grant 2014_SGR_1505) are acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Finally, the award to D.P.D. of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain, is gratefully acknowledged, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hurdles to organic quinone flow cells. Electrode passivation by quinone reduction in acetonitrile Li electrolytes

  • Rueda-García, Daniel
  • Dubal, Deepak P.
  • Huguenin, Fritz
  • Gómez-Romero, P.
The uses of quinones in Redox Flow Batteries (RFBs) has been mainly circumscribed to aqueous solutions (of derivatives with polar groups) despite a larger solubility and wider electrochemical window provided by organic media. The redox mechanism of quinones in protic media is simpler and better known than in aprotic media, where radical species are involved. This paper reports the behaviour of methyl-p-benzoquinone (MBQ) under electrochemical reduction conditions in a LiClO[sbnd]CHCN electrolyte and various working electrodes. We detected the reversible generation of a bright green coating on the working electrode and the subsequent formation of a polymer (the nature of which depends on the presence or absence of oxygen). These coatings prevent the regular redox process of methyl-p-benzoquinone from taking place on the surface of the electrode and is generated regardless of the electrode material used or the presence of O in solution. In addition to MBQ, the green passivating layer was also found for less sterically hindered quinones such as p-benzoquinone or 1,4-naphthoquinone, but not for anthraquinone. We have also shown the central role of Li in the formation of this green layer. This work provides important guidelines for the final use of quinones in RFBs with organic electrolytes., Partial funding from Miisterio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (Grant MAT2015-68394-R, MINECO/FEDER) is acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Finally, the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain, is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of the raman spectra in graphene-based nanofluids and its correlation with thermal properties

  • Rodríguez-Laguna, María del Rocío
  • Gómez-Romero, P.
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
This article belongs to the Special Issue Thermal Transport in Nanostructures and Nanomaterials., It is well known that by dispersing nanoparticles in a fluid, the thermal conductivity of the resulting nanofluid tends to increase with the concentration of nanoparticles. However, it is not clear what the mechanism behind this phenomenon is. Raman spectroscopy is a characterization technique connecting the molecular and macroscopic world, and therefore, it can unravel the puzzling effect exerted by the nanomaterial on the fluid. In this work, we report on a comparative study on the thermal conductivity, vibrational spectra and viscosity of graphene nanofluids based on three different amides: N, N-dimethylacetamide (DMAc); N, N-dimethylformamide (DMF); and N-methyl-2-pyrrolidinone (NMP). A set of concentrations of highly stable surfactant-free graphene nanofluids developed in-house was prepared and characterized. A correlation between the modification of the vibrational spectra of the fluids and an increase in their thermal conductivity in the presence of graphene was confirmed. Furthermore, an explanation of the non-modification of the thermal conductivity in graphene-NMP nanofluids is given based on its structure and a peculiar arrangement of the fluid., ICN2 acknowledges support from Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/ Generalitat de Catalunya. Funding from the Spanish Ministry (MINECO/FEDER: MAT2015-68394-R NaCarFLOW and FIS2015-70862-P PHENTOM) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined Influence of Meso- and Macroporosity of Soft-Hard Templated Carbon Electrodes on the Performance of Li-O2 Cells with Different Configurations

  • Olivares, Mara
  • Aklalouch, Mohamed
  • Tonti, Dino
Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li–O2 battery cathodes., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV- 2015-0496), and through the projects MAT2015-64442-R and MAT2015-68394-R with FEDER co-funding; the European Commission (contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes, LABOHR)”. M.O. acknowledges CSIC for a JAE-DOC research contract cofinanced by European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined influence of meso- and macroporosity of soft-hard templated carbon electrodes on the performance of Li-O2 cells with different configurations

  • Olivares, Mara
  • Aklalouch, Mohamed
  • Tonti, Dino
© The Author(s)., Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li–O2 battery cathodes., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV- 2015-0496), and through the projects MAT2015-64442-R and MAT2015-68394-R with FEDER co-funding; the European Commission (contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes, LABOHR)”. M.O. acknowledges CSIC for a JAE-DOC research contract cofinanced by European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All nanocarbon Li-Ion capacitor with high energy and high power density

  • Dubal, Deepak P.
  • Gómez-Romero, P.
An energy storage device reaching energy densities of 102 Wh/Kg at power densities of 104 W/Kg would mean the possibility of charging such a device in 36 s. The nanocarbon device presented here is closer to that feat than any previously reported system. N-doped Carbon Nanopipes were used as anode and Partially Reduced Graphene Oxide as cathode, with LiPF6 EC/PC electrolyte. This system yields simultaneously high energy and power densities (262 at 450 W/kg and 78 Wh/kg at 9000 W/kg) which are energy/power combinations considerably higher than those of present Li-ion batteries. Our cell exhibits excellent cycle stability (∼91% capacity retention after 4000 cycles “0.01–4 V”). These breakthrough results are based on the kinetic balancing of the nanocarbon electrodes, which can deliver excellent high energy density at high rates and low costs., Partial funding from Miisterio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) and from AGAUR (project NESTOR: 2014_SGR_1505) are acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Finally, the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain, is gratefully acknowledged. DPD acknowledges the support of University of Adelaide, Australia for grant of Research Fellowship (VC Fellow)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Battery and supercapacitor materials in flow cells. Electrochemical energy storage in a LiFePO4/reduced graphene oxide aqueous nanofluid

  • Rueda-García, Daniel
  • Caban-Huertas, Zahilia
  • Sánchez-Ribot, Sergi
  • Marchante, Carlos
  • Benages‑Vilau, Raúl
  • Dubal, Deepak P.
  • Ayyad, Omar
  • Gómez-Romero, P.
Exploring conceptual frontiers between batteries, supercapacitors, redox flow batteries (RFBs) and fuel cells (FCs), we have used a battery material (i.e. LiFePO4) and a supercapacitor material (i.e. graphene) in the form of nanoparticles dispersed in an aqueous electrolyte to characterize the electrochemical activity of the resulting electroactive nanofluids. X-ray diffraction, TEM, Raman, XPS and AFM analyses were carried out to characterize the solid LiFePO4 and RGO components. The corresponding electroactive nanofluids were prepared by dispersion in an aqueous Li2SO4 electrolyte and stabilized with Diaminobenzoic Acid (DABA). Cyclic voltammetry measurements were used to analyze their electrochemical behavior in three-electrode cells. Charge-discharge tests of the LiFePO4/RGO (positive) vs. RGO (negative) nanofluids were also performed. Effective utilization of dispersed electroactive particles (ca. 100 mAh/g(LFP) at 1C) was demonstrated, which turned out to be superior to the same LFP material used as solid electrode. A charge-transfer percolation effect provided by the RGO dispersion is proposed as the mechanism for the good performance of LiFePO4 (not coated with carbon!) and RGO Nanofluids. Our results constitute a first step and proof of concept of the possible application of electroactive nanofluid electrodes in alternative flow batteries., Partial funding from the Spanish Ministry (MINECO-FEDER MAT2015-68394-R. NaCarFLOW) and recognition from AGAUR (2017_SGR_870) are acknowledged. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and fabrication of printed paper‐based hybrid micro‐supercapacitor by using graphene and redox‐active electrolyte

  • Nagar, Bhawna
  • Dubal, Deepak P.
  • Pires, Luis
  • Merkoçi, Arben
  • Gómez-Romero, P.
Inspired by future needs of flexible, simple, and low-cost energy storage devices, smart graphene-based micro-supercapacitors on conventional Xerox paper substrates were developed. The use of redox-active species (iodine redox couple) was explored to further improve the paper device's performance. The device based on printed graphene paper itself already had a remarkable maximum volumetric capacitance of 29.6 mF cm-3 (volume of whole device) at 6.5 mA cm-3 . The performance of the hybrid electrode with redox-active potassium iodide at the graphene surface was tested. Remarkably, the hybrid device showed improved volumetric capacitance of 130 mF cm-3 . The maximum energy density for a graphene+KI device in H2 SO4 electrolyte was estimated to be 0.026 mWh cm-3 . Thus, this work offers a new simple, and lightweight micro-supercapacitor based on low-cost printed graphene paper, which will have great applications in portable electronics., Partial funding from MINECO (grants no. MAT2015-68394-R, and MAT2017-87202-P MINECO/FEDER) and recognition from AGAUR (2017 SGR 870) are acknowledged. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO, grant no. SEV-2013-0295) and funded by the CERCA program/ Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy harvesting from neutralization reactions with saline feedback

  • Lima, Gilberto
  • Dubal, Deepak P.
  • Rueda-García, Daniel
  • Gómez-Romero, P.
  • Huguenin, Fritz
This work proposes an acid-base machine consisting of insertion electrodes for protons and alkaline metal ions placed in electrolytic solutions with different pH values and alkaline ion concentrations to harvest energy from a neutralization reaction. We simulate energy harvesting during acidic wastewater treatment with base (KOH) by using phosphomolybdic acid and nickel hexacyanoferrate as the negative and the positive electrodes, respectively, in aqueous H2SO4 and K2SO4 solutions. In this configuration, the machine harvests energy from a change in the free energy related to changes in the proton and in the potassium ion concentrations after neutralization reactions, with feedback from the saline solution resulting from neutralization. The electrochemical impedance spectroscopy diagrams provide insight into the practical proton and potassium ion electroinsertion reversibility in acidic and neutral media. Based on the charge/discharge curves at pH = 2 and pH = 5.8, the acid-base machine harvests ca. 10 kJ per mol of electro-inserted protons in the first cycles. These results demonstrate that the methodology is viable for sustainable growth—it can harvest energy from wastewater treatment, a practice that can be especially profitable for the industrial sector, which produces great amounts of wastewater., We are grateful to FAPESP (Projects 2015/16867-9 and 2015/17628-8) for financial support. Partial funding from MINECO (NaCarFLOW) and Grant MAT2015-68394-R (MINECO/FEDER) are acknowledged. ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295) and funded by the CERCA programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid graphene‐polyoxometalates nanofluids as liquid electrodes for dual energy storage in novel flow cells

  • Dubal, Deepak P.
  • Rueda-García, Daniel
  • Marchante, Carlos
  • Benages‑Vilau, Raúl
  • Gómez-Romero, P.
Solid Hybrid materials abound. But flowing versions of them are new actors in the materials science landscape and in particular for energy applications. This paper presents a new way to deliver nanostructured hybrid materials for energy storage, namely, in the form of nanofluids. We present here the first example of a hybrid electroactive nanofluid (HENFs) combining capacitive and faradaic energy storage mechanisms in a single fluid material. This liquid electrode is composed of reduced graphene oxide and polyoxometalates (rGO‐POMs) forming a stable nanocomposite for electrochemical energy storage in novel Nanofluid Flow Cells. Two graphene based hybrid materials (rGO‐phosphomolybdate, rGO‐PMo12 and rGO‐phosphotungstate, rGO‐PW12) were synthesized and dispersed with the aid of a surfactant in 1 M H2SO4 aqueous electrolyte to yield highly stable hybrid electroactive nanofluids (HENFs) of low viscosity which were tested in a home‐made flow cell under static and continuous flowing conditions. Remarkably, even low concentration rGO‐POMs HENFs (0.025 wt%) exhibited high specific capacitances of 273 F/g(rGO‐PW12) and 305 F/g(rGO‐PMo12) with high specific energy and specific power. Moreover, rGO‐POM HENFs show excellent cycling stability (∼95 %) as well as Coulombic efficiency (∼77–79 %) after 2000 cycles. Thus, rGO‐POM HENFs effectively behave as real liquid electrodes with excellent properties, demonstrating the possible future application of HENFs for dual energy storage in a new generation of Nanofluid Flow Cells., Partial funding from MINECO-FEDER (MAT2015-68394-R) and moral support from AGAUR (2017 SGR 870) are gratefully acknowledged. Authors appreciate the award to DPD with the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Co-fund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union“. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms behind the enhancement of thermal properties of graphene nanofluids

  • Rodríguez-Laguna, María del Rocío
  • Castro-Álvarez, Alejandro
  • Sledzinska, Marianna
  • Maire, Jeremie
  • Costanzo, Francesca
  • Ensing, Bernd
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Sotomayor Torres, C. M.
  • Gómez-Romero, P.
  • Chávez-Angel, Emigdio
While the dispersion of nanomaterials is known to be effective in enhancing the thermal conductivity and specific heat capacity of fluids, the mechanisms behind this enhancement remain to be elucidated. Herein, we report on highly stable, surfactant-free graphene nanofluids, based on N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF), with enhanced thermal properties. An increase of up to 48% in thermal conductivity and 18% in specific heat capacity was measured. The blue shift of several Raman bands with increasing graphene concentration in DMF indicates that there is a modification in the vibrational energy of the bonds associated with these modes, affecting all the molecules in the liquid. This result indicates that graphene has the ability to affect solvent molecules at long-range, in terms of vibrational energy. Density functional theory and molecular dynamics simulations were used to gather data on the interaction between graphene and solvent, and to investigate a possible order induced by graphene on the solvent. The simulations showed a parallel orientation of DMF towards graphene, favoring π–π stacking. Furthermore, a local order of DMF molecules around graphene was observed suggesting that both this special kind of interaction and the induced local order may contribute to the enhancement of the fluid's thermal properties., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry (MINECO/FEDER: MAT2015-68394-R NaCarFLOW, FIS2015-70862-P PHENTOM and FIS2015-64886-C5-3-P SIESTA) is also acknowledged. FC, BE, MP and PO acknowledge support from the EU Center of Excellence MaX-Materials Design at the Exascale (Grant No. 676598), Generalitat de Catalunya (Grant No. 2014SGR301) and supercomputing resources from the Red Española de Supercomputación (RES). ACA acknowledges Fundació Cellex de Barcelona for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards flexible solid-state supercapacitors for smart and wearable electronics

  • Dubal, Deepak P.
  • Chodankar, Nilesh R.
  • Kim, Do-Heyoung
  • Gómez-Romero, P.
Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field., DPD acknowledges the support of the University of Adelaide, Australia for the grant of a Research Fellowship (VC Fellow), the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia, and the Co-fund program of the Marie Curie Actions of the 7th R&D Framework Program of the European Union. DPD and PGR acknowledges support from MINECO-FEDER (MAT2015-68394-R) and AGAUR (NESTOR 2014_SGR_1505). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and funding from the CERCA Programme/Generalitat de Catalunya. This work was also supported by the National Research Foundation of Korea (NRF-2015M3A7B 4050 424)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin hierarchical porous carbon nanosheets for high‐performance supercapacitors and redox electrolyte energy storage

  • Jayaramulu, Kolleboyina
  • Dubal, Deepak P.
  • Nagar, Bhawna
  • Ranc, Vaclav
  • Tomanec, Ondrej
  • Petr, Martin
  • Datta, Kasibhatta K. R.
  • Zboril, Radek
  • Gómez-Romero, P.
  • Fischer, Roland A.
The design of advanced high‐energy‐density supercapacitors requires the design of unique materials that combine hierarchical nanoporous structures with high surface area to facilitate ion transport and excellent electrolyte permeability. Here, shape‐controlled 2D nanoporous carbon sheets (NPSs) with graphitic wall structure through the pyrolysis of metal–organic frameworks (MOFs) are developed. As a proof‐of‐concept application, the obtained NPSs are used as the electrode material for a supercapacitor. The carbon‐sheet‐based symmetric cell shows an ultrahigh Brunauer–Emmett–Teller (BET)‐area‐normalized capacitance of 21.4 µF cm−2 (233 F g−1), exceeding other carbon‐based supercapacitors. The addition of potassium iodide as redox‐active species in a sulfuric acid (supporting electrolyte) leads to the ground‐breaking enhancement in the energy density up to 90 Wh kg−1, which is higher than commercial aqueous rechargeable batteries, maintaining its superior power density. Thus, the new material provides a double profits strategy such as battery‐level energy and capacitor‐level power density., K.J. is grateful to the Alexander von Humboldt (AvH) foundation for a postdoctoral fellowship. D.P.D. acknowledges the support of University of Adelaide, Australia for grant of Research Fellowship (VC Fellow). D.P.D. and P.G.R. acknowledge funding from MINECO‐FEDER (MAT2015‐68394‐R) and AGAUR (NESTOR 2014_SGR_1505) ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV‐2013‐0295) and funding from the CERCA Programme/Generalitat de Catalunya. The authors also gratefully acknowledge support by the Catalysis Research Centre (CRC) at TU Munich, the support from the Ministry of Education, Youth and Sports of the Czech Republic (LO1305), and the assistance provided by the Research Infrastructure NanoEnviCz, supported by the Ministry of Education, Youth and Sports of the Czech Republic under Project No. LM2015073. The work was further supported by the Operational Programme Research, Development and Education—European Regional Development Fund, Project No. CZ.02.1.01/0.0/0.0/15_003/0000416 of the Ministry of Education, Youth and Sports of the Czech Republic., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling BiVO4 nanorods as a novel anode material for high performance lithium ion capacitors: beyond intercalation strategies

  • Dubal, Deepak P.
  • Jayaramulu, Kolleboyina
  • Zboril, Radek
  • Fischer, Roland A.
  • Gómez-Romero, P.
Energy storage is increasingly demanded in many new niches of applications from wearables to unmanned autonomous vehicles. However, current energy storage systems are unable to fulfill the power requirements (high energy at high power) needed for these novel applications. Recently, Li-ion capacitors (LICs) have been spotted as hybrid devices with the potential to display high energy and high power. Nevertheless, it is still a great challenge to achieve high performance LICs due to the unmatched kinetic properties and capacity between anode and cathode materials. Herein, we are presenting our first seminal report on the use of BiVO4 nanorods as a new anode material for LICs coupled with a partially reduced graphene oxide (PRGO) cathode. The BiVO4 nanorods show an excellent reversible capacity of 877 mA h g−1 (ultrahigh volumetric capacity of 4560 mA h cm−3) at 1.1 A g−1 with a great capacity retention (in half-cell design), which is the highest value reported so far for metal vanadates. Later on, a LIC was constructed with BiVO4 as the anode and PRGO as the cathode electrode, delivering a high energy density of 152 W h kg−1 and a maximum power density of 9.6 kW kg−1 compared to that for hard carbon and intercalation (such as Li4Ti5O12 and Li3VO4) based anode materials. Additionally, the BiVO4//PRGO LIC exhibits a good cyclability of 81% over 6000 cycles. Thus, this investigation opens up new opportunities to develop different LIC systems., DPD acknowledges the support of University of Adelaide, Australia for the grant of Research Fellowship (Research for Impact). Funding from MINECO (MAT2015-68394-R) is acknowledged. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295) and funded by the CERCA programme/Generalitat de Catalunya. K. J. R. is grateful to the Alexander von Humboldt (AvH) foundation for a post-doctoral fellowship. The authors also gratefully acknowledge support by the Catalysis Research Centre at TU Munich and the support from the Ministry of Education, Youth and Sports of the Czech Republic (LO1305) and the assistance provided by the Research Infrastructure NanoEnviCz, supported by the Ministry of Education, Youth and Sports of the Czech Republic under project no. LM2015073. The authors gratefully acknowledge the support by the Operational Programme Research, Development and Education – European Regional Development Fund, project no. CZ.02.1.01/0.0/0.0/15_003/0000416 and the project CZ.02.1.01/0.0/0.0/16_019/0000754., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of low-melting point molten salts and detection of solid-to-liquid transitions by alternative techniques to DSC

  • Rodríguez-Laguna, María del Rocío
  • Gómez-Romero, P.
  • Sotomayor Torres, C. M.
  • Lu, Ming-Chang
  • Chávez-Angel, Emigdio
The ‘Solar salt’ (60% NaNO3-40% KNO3, wt. %) is the most used heat transfer and storage material in high temperature CSP systems. The main drawback is its high melting temperature of 228 °C, which requires extra-energy to keep it in the liquid state and avoid damage to pipes at low temperatures. Multi-component salts are combinations of different cations and anions. The difference in size of the ions hinders the crystallization of the material and provides lower melting temperatures. Multi-component salts are considered in this study to replace simpler combinations, such as binary and ternary eutectic mixtures. Herein, we report on two novel six-component nitrates with a melting temperature of 60–75 °C and a thermal stability up to ~500 °C under a linear heating program in N2 atmosphere. Properties such as the thermal conductivity in solid and molten state, heat capacity and vibrational spectra were evaluated. The study of the thermal behaviour of these materials using differential scanning calorimetry was insufficient, hence alternative and complementary techniques were used, such as: the three-omega technique, optical transmission and Raman spectroscopy. Multi-component salts were found to solidify as amorphous solids even at slow cooling rates and water was found to behave as a catalyst of crystallization., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM and MAT2015-68394-R NaCarFLOW are also acknowledged. M.-C. L acknowledges support from the Ministry of Science and Technology in Taiwan, MOST 104-2221-E-009-147-MY3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From thermal to electroactive graphene nanofluids

  • Rueda-García, Daniel
  • Rodríguez-Laguna, María del Rocío
  • Chávez-Angel, Emigdio
  • Dubal, Deepak P.
  • Caban-Huertas, Zahilia
  • Benages‑Vilau, Raúl
  • Gómez-Romero, P.
This article belongs to the Special Issue Selected papers of the "1st International Conference on Nanofluids (ICNf)"., Here, we describe selected work on the development and study of nanofluids based on graphene and reduced graphene oxide both in aqueous and organic electrolytes. A thorough study of thermal properties of graphene in amide organic solvents (N,N-dimethylformamide, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone) showed a substantial increase of thermal conductivity and specific heat upon graphene integration in those solvents. In addition to these thermal studies, our group has also pioneered a distinct line of work on electroactive nanofluids for energy storage. In this case, reduced graphene oxide (rGO) nanofluids in aqueous electrolytes were studied and characterized by cyclic voltammetry and charge-discharge cycles (i.e., in new flow cells). In addition, hybrid configurations (both hybrid nanofluid materials and hybrid cells combining faradaic and capacitive activities) were studied and are summarized here., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry (MAT2015-68394-R and RTI2018-099826-B-I00, MCIU/AEI/FEDER, UE) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the enhancement of the thermal conductivity of graphene-based nanofluids

  • Rodríguez-Laguna, María del Rocío
  • Sotomayor Torres, C. M.
  • Gómez-Romero, P.
  • Chávez-Angel, Emigdio
Trabajo presentado a la 18th International Conference on Nanotechnology (IEEE-NANO), celebrada en Cork (Irlanda) del 23 al 26 de julio de 2018., Heat transfer fluids have been extensively used in both low-temperature and high temperature applications (e.g. microelectronics cooling and concentrated solar power). However, their low thermal conductivity is still a limit on performance. One way to enhance thermal properties is to disperse nanomaterials, such as graphene flakes in the base fluid. In this work, we have developed highly stable DMAcgraphene nanofluids with enhanced thermal properties. Furthermore, the displacement of several Raman bands as a function of graphene concentration in DMAc suggests that the solvent molecules are able to interact with graphene surfaces strongly., We acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry (MINECO-FEDER MAT2015-68394-R NaCarFLOW) and PHENTOM (FIS2015-70862-P) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of one-dimensional quantum crystals of molecular deuterium inside carbon nanotubes

  • Cabrillo García, Carlos
  • Fernández-Perea, Ricardo
  • Bermejo, Francisco Javier
  • Chico, Leonor
  • Mondelli, C.
  • González, M. A.
  • Enciso, Eduardo
  • Benito, Ana M.
  • Maser, Wolfgang K.
7 figures.-- Supplementary data available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Crystallization under stringent cylindrical confinement leads to novel quasi-one-dimensional materials. Substances with strong cohesive interactions can eventually preserve the symmetries of their bulk phase compatible with the restricted geometry, while those with weak cohesive interactions develop qualitatively different structures. Frozen molecular deuterium (D2), a solid with a strong quantum character, is structurally held by weak dispersive forces. Here, the formation of one-dimensional D2 crystals under carbon nanotube confinement is reported. In contradiction with its weak cohesive interactions, their structures, scrutinized using neutron scattering, correspond to definite cylindrical sections of the hexagonal close-packed bulk crystal. The results are rationalized on the grounds of numerical calculations, which point towards nuclear quantum delocalization as the physical mechanism responsible for the stabilization of such outstanding structures., This work has been partly supported by the Spanish Agencia Estatal de Investigación (AEI), Fondo Europeo de Desarrollo Regional (FEDER, EU), Ministerio de Economía y Competitividad (MINECO), Ministerio de Ciencia, Innovación y Universidades (MCIU), under Grants No. MAT2016-75354-P (AEI/FEDER, EU), FIS2015-64654-P (MINECO/FEDER, EU), MAT2015-68394-R (MINECO/FEDER, EU), PGC2018-097018-B-I00 (MCIU/AEI/FEDER, EU), MAT2012-33633 (MINECO/FEDER, EU), MAT2012-39199-C02-02 (MINECO/FEDER, EU), by EU COST Action CM1405 “Molecules in Motion” (MOLIM), and by Spanish Ministerio de Ciencia e Innovación under Grants No. MAT2007-65711-C04-01, MAT2007-65711-C04-05, MAT2002-04540-C05-02, MAT2002-04540-C05-03, and MAT2002-04540-C05-04., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using polyoxometalates to enhance the capacity of lithium-oxygen batteries

  • Homewood, Tom
  • Frith, James T.
  • Vivek, J Padmanabhan
  • Casañ Pastor, Nieves
  • Tonti, Dino
  • Owen, John R.
  • Garcia Araez, Nuria
The Keggin-type polyoxometalate α-SiW12O404- increases the discharge capacity and potential of lithium-oxygen batteries, by facilitating the reduction of O2 to Li2O2, as confirmed by in situ electrochemical pressure measurements and XRD. Compared to organic redox mediators, polyoxometalates have higher chemical and structural stability, which could lead to longer cycling lithium-oxygen batteries., Financial support from the European Commission through the FP7-MC-CIG FunLAB project (630162), from EPSRC through the Energy SUPERSTORE call “supporting early career researchers” (EP/L019469/1), from the Royal Society for a Research Grant (RG130523) and from the Spanish Government, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and through projects MAT2015-68394-R and MAT2015-65192-R are gratefully acknowledged. N. G. A. gratefully acknowledges EPSRC for an early career fellowship (EP/N024303/1). The data for this article is available from the University of Southampton at DOI: 10.5258/SOTON/D0570., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Architecture of Na-O2 battery deposits revealed by transmission X-ray microscopy

  • Landa Medrano, Imanol
  • Sorrentino, Andrea
  • Stievano, Lorenzo
  • Ruiz de Larramendi, Idoia
  • Pereiro, Eva
  • Lezama, Luis
  • Rojo, Teófilo
  • Tonti, Dino
The microstructure and chemical composition of the discharge products generated in sodium-oxygen batteries are analyzed by transmission X-ray microscopy (TXM) revealing a complex architecture. Unexpectedly, sodium peroxide is detected in the cubic-shaped discharge deposits associated with the often reported sodium superoxide. Analyses on the product distribution show a surface layer rich in decomposition products in contact with an O-deficient region enclosing the bulk of these cubes. In addition, we show that oxygen evolution reaction (OER) occurs by a process that involves oxidation and re-dissolution of the bulk fraction, leading to a contraction of the discharge particles and a composition similar to that found in the intermediate phase of the deposits observed at the end of discharge. All these solid compounds are eventually removed at the end of recharge, but formation of these structures evidence possible irreversible pathways that need to be considered for the cycle life improvement., The X-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. Work was funded by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), and through projects MAT2015-68394-R, MAT2013-41128-R, MAT2016-78266-P, by the Generalitat de Catalunya (grant 2014 SGR 1505), the "Fondo Europeo de Desarrollo Regional" (FEDER) and the Eusko Jaurlaritza/Gobierno Vasco (under project IT-570-13). I.L.M. thanks the Universidad del País Vasco (UPV/EHU) for his predoctoral and postdoctoral fellowships., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrahigh energy density supercapacitors through a double hybrid strategy

  • Dubal, Deepak P.
  • Nagar, Bhawna
  • Suárez Guevara, Jullieth
  • Tonti, Dino
  • Enciso, Eduardo
  • Palomino, Pablo
  • Gómez Romero, Pedro
Herein, we are presenting all-solid-state symmetric supercapacitors (ASSSCs) with an innovative double hybrid strategy, where a hybrid material based on reduced graphene oxide (rGO) anchored with phoshotungstic acid, rGO-H<inf>3</inf>PW<inf>12</inf>O<inf>40</inf>) is combined with hybrid electrolyte (hydroquinone-doped gel electrolyte). Initially, a hybrid electrode is fabricated by decorating H<inf>3</inf>PW<inf>12</inf>O<inf>40</inf> nanodots onto the surface rGO (rGO-PW<inf>12</inf>). Next, a symmetric cell based on rGO-PW<inf>12</inf> electrodes was assembled with PVA-H<inf>2</inf>SO<inf>4</inf> polymer gel-electrolyte. Interestingly, rGO-PW<inf>12</inf> symmetric cell revealed a substantial enhancement in the cell performance as compared to parent rGO systems. It featured a widened potential range of 1.6 V, thereby providing 1.05 mWh/cm<sup>3</sup> energy density. The electrochemical performance of rGO-PW<inf>12</inf> cell was further advanced by introducing redox-active (hydroquinone) species in to the PVA-H<inf>2</inf>SO<inf>4</inf> gel-electrolyte. Indeed, the performance of rGO-PW<inf>12</inf> cell was surprisingly improved with an ultra-high energy density of 2.38 mWh/cm<sup>3</sup> (more than two-fold)., Partial funding from Miisterio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) and from AGAUR (project NESTOR) are acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Finally, the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain, is gratefully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Discharge products of ionic liquid-based Li-O2 batteries observed by energy dependent soft x-ray transmission microscopy

  • Olivares, Mara
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Tonti, Dino
Products deposited on an O<inf>2</inf>-cathode discharged in ionic liquid electrolytes are analyzed by transmission soft X-ray microscopy (TXM) and compared to ether-based electrolytes, showing differences in morphology and chemical compositions. With both solvents we observe Li<inf>2</inf>O<inf>2</inf> and LiO<inf>2</inf> primary products in similar proportions. However, while as previously observed in tetraglyme an important reactivity takes place producing significant amount of carbonates, in ionic liquid-based electrolytes the formation of carbonates was almost negligible, confirming higher stability. Only when sample is intentionally air exposed before analysis, significant amounts of carbonates came up. However, LiOH crystallites are clearly recognized with the ionic liquid electrolyte. The abundance of these crystallites depends on both the LiTFSI concentration and the storage time of discharged electrodes, suggesting that they result from the reaction of water trace with primary discharge products., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), and projects MAT2012-39199-C02-01, MAT2015-68394-R, by the Generalitat de Catalunya (grant 2014 SGR 1505) and by the European Commission in the Seventh Framework Programme FP7-2010-GC-ELECTROCHEMICAL STORAGE, under contract no. 265971 “Lithium−Air Batteries with Split Oxygen Harvesting and Redox processes (LABOHR)”. M.O.M. acknowledges CSIC for a JAE-DOC research contract co-funded by the European Social Fund. The x-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. In particular, we want to thank the technical support of R. Valcarcel., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanisms behind the enhancement of thermal properties of graphene nanofluids

  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Maire, Jeremie|||0000-0002-9921-4804
  • Costanzo, Francesca|||0000-0002-5258-9246
  • Ensing, Bernd|||0000-0002-4913-3571
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
While the dispersion of nanomaterials is known to be effective in enhancing the thermal conductivity and specific heat capacity of fluids, the mechanisms behind this enhancement remain to be elucidated. Herein, we report on highly stable, surfactant-free graphene nanofluids, based on N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF), with enhanced thermal properties. An increase of up to 48% in thermal conductivity and 18% in specific heat capacity was measured. The blue shift of several Raman bands with increasing graphene concentration in DMF indicates that there is a modification in the vibrational energy of the bonds associated with these modes, affecting all the molecules in the liquid. This result indicates that graphene has the ability to affect solvent molecules at long-range, in terms of vibrational energy. Density functional theory and molecular dynamics simulations were used to gather data on the interaction between graphene and solvent, and to investigate a possible order induced by graphene on the solvent. The simulations showed a parallel orientation of DMF towards graphene, favoring π-π stacking. Furthermore, a local order of DMF molecules around graphene was observed suggesting that both this special kind of interaction and the induced local order may contribute to the enhancement of the fluid's thermal properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electroactive graphene nanofluids for fast energy storage

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Graphenes have been extensively studied as electrode materials for energy storage in supercapacitors and batteries, but always as solid electrodes. The conception and development of graphene electroactive nanofluids (ENFs) reported here for the first time provides a novel way to 'form' graphene electrodes and demonstrates proof of concept for the use of these liquid electrodes for energy storage in novel flow cells.Astabilized dispersion of reduced graphene oxide (rGO) in aqueous sulfuric acid solution was shown to have capacitive energy storage capabilities parallel to those of solid electrode supercapacitors (169 F g(rGO)) but working up to much faster rates (from 1mV s to the highest scan rate of 10 V s) in nanofluids with 0.025, 0.1 and 0.4 wt% rGO, featuring viscosities very close to that of water, thus being perfectly suitable for scalable flow cells. Our results provide proof of concept for this technology and include preliminary flow cell performance of rGO nanofluids under static and continuous flow conditions. Graphene nanofluids effectively behave as true liquid electrodes with very fast capacitive storage mechanism and herald the application not only of graphenes but also other 2D materials like MoS in nanofluids for energy storage and beyond.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling BiVO4 nanorods as a novel anode material for high performance lithium ion capacitors, beyond intercalation strategies

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Jayaramulu, Kolleboyina|||0000-0003-4923-5065
  • Zboril, Radek|||0000-0002-3147-2196
  • Fischer, Roland A.|||0000-0002-7532-5286
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Energy storage is increasingly demanded in many new niches of applications from wearables to unmanned autonomous vehicles. However, current energy storage systems are unable to fulfill the power requirements (high energy at high power) needed for these novel applications. Recently, Li-ion capacitors (LICs) have been spotted as hybrid devices with the potential to display high energy and high power. Nevertheless, it is still a great challenge to achieve high performance LICs due to the unmatched kinetic properties and capacity between anode and cathode materials. Herein, we are presenting our first seminal report on the use of BiVO nanorods as a new anode material for LICs coupled with a partially reduced graphene oxide (PRGO) cathode. The BiVO nanorods show an excellent reversible capacity of 877 mA h g (ultrahigh volumetric capacity of 4560 mA h cm) at 1.1 A g with a great capacity retention (in half-cell design), which is the highest value reported so far for metal vanadates. Later on, a LIC was constructed with BiVO as the anode and PRGO as the cathode electrode, delivering a high energy density of 152 W h kg and a maximum power density of 9.6 kW kg compared to that for hard carbon and intercalation (such as LiTiO and LiVO) based anode materials. Additionally, the BiVO//PRGO LIC exhibits a good cyclability of 81% over 6000 cycles. Thus, this investigation opens up new opportunities to develop different LIC systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Capacitive vs Faradaic Energy Storage in a Hybrid Cell with LiFePO4/RGO Positive Electrode and Nanocarbon Negative Electrode

  • Cabán Huertas, Zahilia
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Ayyad, Omar
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report an advanced device based on a Nitrogen-doped Carbon Nanopipes (N-CNP) negative electrode and a lithium iron phosphate (LiFePO) positive electrode. We carefully balanced the cell composition (charge balance) and suppressed the initial irreversible capacity of the anode in the round of few cycles.We demonstrated an optimal performance in terms of specific capacity 170 mAh/g of LiFePO with energy density of about 203 Wh kg and a stable operation for over 100 charge-discharge cycles. The components of this device (combining capacitive and faradaic electrodes) are low cost and easily scalable. This device has a performance comparable to those offered by the present technology of LIBs with the potential for faster charging; hence, we believe that the results disclosed in this work may open up new opportunities for energy storage devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modification of the raman spectra in graphene-based nanofluids and its correlation with thermal properties

  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
It is well known that by dispersing nanoparticles in a fluid, the thermal conductivity of the resulting nanofluid tends to increase with the concentration of nanoparticles. However, it is not clear what the mechanism behind this phenomenon is. Raman spectroscopy is a characterization technique connecting the molecular and macroscopic world, and therefore, it can unravel the puzzling effect exerted by the nanomaterial on the fluid. In this work, we report on a comparative study on the thermal conductivity, vibrational spectra and viscosity of graphene nanofluids based on three different amides: N, N-dimethylacetamide (DMAc); N, N-dimethylformamide (DMF); and N-methyl-2-pyrrolidinone (NMP). A set of concentrations of highly stable surfactant-free graphene nanofluids developed in-house was prepared and characterized. A correlation between the modification of the vibrational spectra of the fluids and an increase in their thermal conductivity in the presence of graphene was confirmed. Furthermore, an explanation of the non-modification of the thermal conductivity in graphene-NMP nanofluids is given based on its structure and a peculiar arrangement of the fluid.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid graphene-polyoxometalates nanofluids as liquid electrodes for dual energy storage in novel flow cells

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Marchante, Carlos|||0000-0002-2296-0112
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Solid Hybrid materials abound. But flowing versions of them are new actors in the materials science landscape and in particular for energy applications. This paper presents a new way to deliver nanostructured hybrid materials for energy storage, namely, in the form of nanofluids. We present here the first example of a hybrid electroactive nanofluid (HENFs) combining capacitive and faradaic energy storage mechanisms in a single fluid material. This liquid electrode is composed of reduced graphene oxide and polyoxometalates (rGO-POMs) forming a stable nanocomposite for electrochemical energy storage in novel Nanofluid Flow Cells. Two graphene based hybrid materials (rGO-phosphomolybdate, rGO-PMo₁₂ and rGO-phosphotungstate, rGO-PW₁₂) were synthesized and dispersed with the aid of a surfactant in 1 M H₂SO₄ aqueous electrolyte to yield highly stable hybrid electroactive nanofluids (HENFs) of low viscosity which were tested in a home-made flow cell under static and continuous flowing conditions. Remarkably, even low concentration rGO-POMs HENFs (0.025 wt%) exhibited high specific capacitances of 273 F/g(rGO-PW₁₂) and 305 F/g(rGO-PMo₁₂) with high specific energy and specific power. Moreover, rGO-POM HENFs show excellent cycling stability (∼95 %) as well as Coulombic efficiency (∼77-79 %) after 2000 cycles. Thus, rGO-POM HENFs effectively behave as real liquid electrodes with excellent properties, demonstrating the possible future application of HENFs for dual energy storage in a new generation of Nanofluid Flow Cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Energy harvesting from neutralization reactions with saline feedback

  • Lima, Gilberto
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Huguenin, Fritz|||0000-0002-4164-7930
This work proposes an acid-base machine consisting of insertion electrodes for protons and alkaline metal ions placed in electrolytic solutions with different pH values and alkaline ion concentrations to harvest energy from a neutralization reaction. We simulate energy harvesting during acidic wastewater treatment with base (KOH) by using phosphomolybdic acid and nickel hexacyanoferrate as the negative and the positive electrodes, respectively, in aqueous HSO and KSO solutions. In this configuration, the machine harvests energy from a change in the free energy related to changes in the proton and in the potassium ion concentrations after neutralization reactions, with feedback from the saline solution resulting from neutralization. The electrochemical impedance spectroscopy diagrams provide insight into the practical proton and potassium ion electroinsertion reversibility in acidic and neutral media. Based on the charge/discharge curves at pH = 2 and pH = 5.8, the acid-base machine harvests ca. 10 kJ per mol of electro-inserted protons in the first cycles. These results demonstrate that the methodology is viable for sustainable growth-it can harvest energy from wastewater treatment, a practice that can be especially profitable for the industrial sector, which produces great amounts of wastewater.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

V2O5 encapsulated MWCNTs in 2D surface architecture, complete solid-state bendable highly stabilized energy efficient supercapacitor device

  • Pandit, Bidhan
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Kale, Bharat B.|||0000-0003-0556-9477
  • Sankapal, Babasaheb R.
A simple and scalable approach has been reported for O encapsulation over interconnected multi-walled carbon nanotubes (MWCNTs) network using chemical bath deposition method. Chemically synthesized O/MWCNTs electrode exhibited excellent charge-discharge capability with extraordinary cycling retention of 93% over 4000 cycles in liquid-electrolyte. Electrochemical investigations have been performed to evaluate the origin of capacitive behavior from dual contribution of surface-controlled and diffusion-controlled charge components. Furthermore, a complete flexible solid-state, flexible symmetric supercapacitor (FSS-SSC) device was assembled with O/MWCNTs electrodes which yield remarkable values of specific power and energy densities along with enhanced cyclic stability over liquid configuration. As a practical demonstration, the constructed device was used to lit the 'VNIT' acronym assembled using 21 LED's.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Battery and supercapacitor materials in flow cells. Electrochemical energy storage in a LiFePO4/reduced graphene oxide aqueous nanofluid

  • Rueda García, Daniel|||0000-0003-3539-1585
  • Cabán Huertas, Zahilia
  • Sánchez Ribot, Sergi
  • Marchante, Carlos|||0000-0002-2296-0112
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Ayyad, Omar
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Exploring conceptual frontiers between batteries, supercapacitors, redox flow batteries (RFBs) and fuel cells (FCs), we have used a battery material (i.e. LiFePO) and a supercapacitor material (i.e. graphene) in the form of nanoparticles dispersed in an aqueous electrolyte to characterize the electrochemical activity of the resulting electroactive nanofluids. X-ray diffraction, TEM, Raman, XPS and AFM analyses were carried out to characterize the solid LiFePO and RGO components. The corresponding electroactive nanofluids were prepared by dispersion in an aqueous LiSO electrolyte and stabilized with Diaminobenzoic Acid (DABA). Cyclic voltammetry measurements were used to analyze their electrochemical behavior in three-electrode cells. Charge-discharge tests of the LiFePO/RGO (positive) vs. RGO (negative) nanofluids were also performed. Effective utilization of dispersed electroactive particles (ca. 100 mAh/g(LFP) at 1C) was demonstrated, which turned out to be superior to the same LFP material used as solid electrode. A charge-transfer percolation effect provided by the RGO dispersion is proposed as the mechanism for the good performance of LiFePO (not coated with carbon!) and RGO Nanofluids. Our results constitute a first step and proof of concept of the possible application of electroactive nanofluid electrodes in alternative flow batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hurdles to organic quinone flow cells. Electrode passivation by quinone reduction in acetonitrile Li electrolytes

  • Rueda García, Daniel|||0000-0003-3539-1585
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Huguenin, Fritz|||0000-0002-4164-7930
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
The uses of quinones in Redox Flow Batteries (RFBs) has been mainly circumscribed to aqueous solutions (of derivatives with polar groups) despite a larger solubility and wider electrochemical window provided by organic media. The redox mechanism of quinones in protic media is simpler and better known than in aprotic media, where radical species are involved. This paper reports the behaviour of methyl-p-benzoquinone (MBQ) under electrochemical reduction conditions in a LiClO[sbnd]CHCN electrolyte and various working electrodes. We detected the reversible generation of a bright green coating on the working electrode and the subsequent formation of a polymer (the nature of which depends on the presence or absence of oxygen). These coatings prevent the regular redox process of methyl-p-benzoquinone from taking place on the surface of the electrode and is generated regardless of the electrode material used or the presence of O in solution. In addition to MBQ, the green passivating layer was also found for less sterically hindered quinones such as p-benzoquinone or 1,4-naphthoquinone, but not for anthraquinone. We have also shown the central role of Li in the formation of this green layer. This work provides important guidelines for the final use of quinones in RFBs with organic electrolytes.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

On the Enhancement of the Thermal Conductivity of Graphene-Based Nanofluids

  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Heat transfer fluids have been extensively used in both low-temperature and high temperature applications (e.g. microelectronics cooling and concentrated solar power). However, their low thermal conductivity is still a limit on performance. One way to enhance thermal properties is to disperse nanomaterials, such as graphene flakes in the base fluid. In this work, we have developed highly stable DMAc-graphene nanofluids with enhanced thermal properties. Furthermore, the displacement of several Raman bands as a function of graphene concentration in DMAc suggests that the solvent molecules are able to interact with graphene surfaces strongly.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Development of low-melting point molten salts and detection of solid-to-liquid transitions by alternative techniques to DSC

  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Lu, Ming-Chang|||0000-0002-1186-0191
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
The 'Solar salt' (60% NaNO-40% KNO, wt. %) is the most used heat transfer and storage material in high temperature CSP systems. The main drawback is its high melting temperature of 228 °C, which requires extra-energy to keep it in the liquid state and avoid damage to pipes at low temperatures. Multi-component salts are combinations of different cations and anions. The difference in size of the ions hinders the crystallization of the material and provides lower melting temperatures. Multi-component salts are considered in this study to replace simpler combinations, such as binary and ternary eutectic mixtures. Herein, we report on two novel six-component nitrates with a melting temperature of 60-75 °C and a thermal stability up to ~500 °C under a linear heating program in N atmosphere. Properties such as the thermal conductivity in solid and molten state, heat capacity and vibrational spectra were evaluated. The study of the thermal behaviour of these materials using differential scanning calorimetry was insufficient, hence alternative and complementary techniques were used, such as: the three-omega technique, optical transmission and Raman spectroscopy. Multi-component salts were found to solidify as amorphous solids even at slow cooling rates and water was found to behave as a catalyst of crystallization.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

All nanocarbon Li-Ion capacitor with high energy and high power density

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
An energy storage device reaching energy densities of 102 Wh/Kg at power densities of 10 W/Kg would mean the possibility of charging such a device in 36 s. The nanocarbon device presented here is closer to that feat than any previously reported system. N-doped Carbon Nanopipes were used as anode and Partially Reduced Graphene Oxide as cathode, with LiPF EC/PC electrolyte. This system yields simultaneously high energy and power densities (262 at 450 W/kg and 78 Wh/kg at 9000 W/kg) which are energy/power combinations considerably higher than those of present Li-ion batteries. Our cell exhibits excellent cycle stability (∼91% capacity retention after 4000 cycles "0.01-4 V"). These breakthrough results are based on the kinetic balancing of the nanocarbon electrodes, which can deliver excellent high energy density at high rates and low costs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards flexible solid-state supercapacitors for smart and wearable electronics, Recent Advances in Flexible Solid-State Supercapacitors

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Chodankar, Nilesh R.|||0000-0002-1174-2064
  • Kim, Do-Heyoung|||0000-0001-7949-2252
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

From thermal to electroactive graphene nanofluids

  • Rueda García, Daniel|||0000-0003-3539-1585
  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Cabán Huertas, Zahilia
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Here, we describe selected work on the development and study of nanofluids based on graphene and reduced graphene oxide both in aqueous and organic electrolytes. A thorough study of thermal properties of graphene in amide organic solvents (N,N-dimethylformamide, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone) showed a substantial increase of thermal conductivity and specific heat upon graphene integration in those solvents. In addition to these thermal studies, our group has also pioneered a distinct line of work on electroactive nanofluids for energy storage. In this case, reduced graphene oxide (rGO) nanofluids in aqueous electrolytes were studied and characterized by cyclic voltammetry and charge-discharge cycles (i.e., in new flow cells). In addition, hybrid configurations (both hybrid nanofluid materials and hybrid cells combining faradaic and capacitive activities) were studied and are summarized here.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design and Fabrication of Printed Paper-Based Hybrid Micro-Supercapacitor by using Graphene and Redox-Active Electrolyte

  • Nagar, Bhawna|||0000-0003-2363-9758
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Baptista Pires, Luis Miguel|||0000-0002-2290-6386
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Inspired by future needs of flexible, simple, and low-cost energy storage devices, smart graphene-based micro-supercapacitors on conventional Xerox paper substrates were developed. The use of redox-active species (iodine redox couple) was explored to further improve the paper device's performance. The device based on printed graphene paper itself already had a remarkable maximum volumetric capacitance of 29.6 mF cm (volume of whole device) at 6.5 mA cm. The performance of the hybrid electrode with redox-active potassium iodide at the graphene surface was tested. Remarkably, the hybrid device showed improved volumetric capacitance of 130 mF cm. The maximum energy density for a graphene+KI device in HSO electrolyte was estimated to be 0.026 mWh cm. Thus, this work offers a new simple, and lightweight micro-supercapacitor based on low-cost printed graphene paper, which will have great applications in portable electronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Functionalization of Polypyrrole Nanopipes with Redox-Active Polyoxometalates for High Energy Density Supercapacitors, "Nailing" Redox-active Polyoxometalates (POMs) to Polypyrrole Nano-pipes for Ultrahigh Energy Density Supercapacitors

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Mohite, Ashwini A.
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Hybrid materials are very attractive for the fabrication of high-performance supercapacitors. Here, we have explored organic-inorganic hybrid materials based on open-end porous 1 D polypyrrole nanopipes (PPy-NPipes) and heteropolyoxometalates (phosphotungstate ([PWO], PW) or phosphomolybdate ([PMoO], PMo)) that display excellent areal capacitances. Two different hybrid materials (PMo@PPy and PW@PPy) were effectively synthesized and used for symmetric supercapacitors. The anchoring of the inorganic nanoclusters onto the conducting polymer nanopipes led to electrodes that stood up to our best expectations exhibiting outstanding areal capacitances that are almost 1.5 to 2 fold higher than that of pristine PPy-NPipes. In addition, symmetric cells based on PMo@PPy and PW@PPy hybrid electrodes were fabricated and showed significant improvement in cell performance with very high volumetric capacitances in the range of 6.3-6.8 F cm(considering the volume of whole device). Indeed, they provide extended potential windows in acidic electrolytes (up to 1.5 V) which led to ultrahigh energy densities of 1.5 and 2.2 mWh cmfor PMo@PPy and PW@PPy cells, respectively. Thus, these unique organic-inorganic hybrid symmetric cells displayed extraordinary electrochemical performances far exceeding those of more complex asymmetric systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrahigh energy density supercapacitors through a double hybrid strategy

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Nagar, Bhawna|||0000-0003-2363-9758
  • Suarez-Guevara, Jullieth|||0000-0003-4570-7125
  • Tonti, Dino|||0000-0003-0240-1011
  • Enciso, Eduardo|||0000-0002-5536-2864
  • Palomino, Pablo
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Herein, we are presenting all-solid-state symmetric supercapacitors (ASSSCs) with an innovative double hybrid strategy, where a hybrid material based on reduced graphene oxide (rGO) anchored with phoshotungstic acid, rGO-HPWO) is combined with hybrid electrolyte (hydroquinone-doped gel electrolyte). Initially, a hybrid electrode is fabricated by decorating HPWO nanodots onto the surface rGO (rGO-PW). Next, a symmetric cell based on rGO-PW electrodes was assembled with PVA-HSO polymer gel-electrolyte. Interestingly, rGO-PW symmetric cell revealed a substantial enhancement in the cell performance as compared to parent rGO systems. It featured a widened potential range of 1.6 V, thereby providing 1.05 mWh/cm energy density. The electrochemical performance of rGO-PW cell was further advanced by introducing redox-active (hydroquinone) species in to the PVA-HSO gel-electrolyte. Indeed, the performance of rGO-PW cell was surprisingly improved with an ultra-high energy density of 2.38 mWh/cm (more than two-fold).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct electrodeposition of imidazole modified poly(pyrrole) copolymers, synthesis, characterization and supercapacitive properties

  • Wolfart, Franciele
  • Hryniewicz, Bruna|||0000-0002-8701-4418
  • Marchesi, Luís F.
  • Orth, Elisa
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Vidotti, Marcio|||0000-0002-9944-5186
In this manuscript we report the direct electrosynthesis of a new conducting copolymer based on the incorporation of imidazole molecules within the polypyrrole chain. Different proportions of the monomers were tested during the direct electropolymerization of the copolymer. The resulting materials were characterized by electrochemical and spectroscopic techniques (Raman and XPS) and a mechanism of polymerization is proposed. Our findings showed that imidazole acts as an inhibitor of the polymerization process, decreasing the overall number of actives sites for the polymerization on the electrode surface producing a polymeric morphology very different compared with pure polypyrrole, as observed by Scanning Electron Microscopy images and corroborated by Electrochemical Impedance Spectroscopy. This behavior significantly affects the supercapacitive performance of the resulting p(Py-IMZ) modified electrodes where the specific capacitance of the material increased from 122 to 201 Fg (64%) at 10 mV s. Furthermore, a unique pseudo-capacitive behavior described herein emphasizes the role of the imidazole as inductor of the morphology and co-monomer in the unique electrochemical signature of the material. The results suggest that the incorporation of IMZ increases the specific capacitance of PPy electrode by around 64%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrathin hierarchical porous carbon nanosheets for high-performance supercapacitors and redox electrolyte energy storage

  • Jayaramulu, Kolleboyina|||0000-0003-4923-5065
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Nagar, Bhawna|||0000-0003-2363-9758
  • Ranc, Vaclav
  • Tomanec, Ondrej
  • Petr, Martin
  • Datta, Kasibhatta Kumara Ramanatha
  • Zboril, Radek|||0000-0002-3147-2196
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Fischer, Roland A.|||0000-0002-7532-5286
The design of advanced high-energy-density supercapacitors requires the design of unique materials that combine hierarchical nanoporous structures with high surface area to facilitate ion transport and excellent electrolyte permeability. Here, shape-controlled 2D nanoporous carbon sheets (NPSs) with graphitic wall structure through the pyrolysis of metal-organic frameworks (MOFs) are developed. As a proof-of-concept application, the obtained NPSs are used as the electrode material for a supercapacitor. The carbon-sheet-based symmetric cell shows an ultrahigh Brunauer-Emmett-Teller (BET)-area-normalized capacitance of 21.4 µF cm (233 F g), exceeding other carbon-based supercapacitors. The addition of potassium iodide as redox-active species in a sulfuric acid (supporting electrolyte) leads to the ground-breaking enhancement in the energy density up to 90 Wh kg, which is higher than commercial aqueous rechargeable batteries, maintaining its superior power density. Thus, the new material provides a double profits strategy such as battery-level energy and capacitor-level power density