Pasar al contenido principal

MATERIALES Y COMPONENTES HIBRIDOS PARA SUPERCONDENSADORES Y DISPOSITIVOS INTEGRADOS DE "HARVESTING" Y ALMACENAMIENTO

RTI2018-099826-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From thermal to electroactive graphene nanofluids

  • Rueda-García, Daniel
  • Rodríguez-Laguna, María del Rocío
  • Chávez-Angel, Emigdio
  • Dubal, Deepak P.
  • Caban-Huertas, Zahilia
  • Benages‑Vilau, Raúl
  • Gómez-Romero, P.
This article belongs to the Special Issue Selected papers of the "1st International Conference on Nanofluids (ICNf)"., Here, we describe selected work on the development and study of nanofluids based on graphene and reduced graphene oxide both in aqueous and organic electrolytes. A thorough study of thermal properties of graphene in amide organic solvents (N,N-dimethylformamide, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone) showed a substantial increase of thermal conductivity and specific heat upon graphene integration in those solvents. In addition to these thermal studies, our group has also pioneered a distinct line of work on electroactive nanofluids for energy storage. In this case, reduced graphene oxide (rGO) nanofluids in aqueous electrolytes were studied and characterized by cyclic voltammetry and charge-discharge cycles (i.e., in new flow cells). In addition, hybrid configurations (both hybrid nanofluid materials and hybrid cells combining faradaic and capacitive activities) were studied and are summarized here., ICN2 acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry (MAT2015-68394-R and RTI2018-099826-B-I00, MCIU/AEI/FEDER, UE) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can polyoxometalates enhance the capacitance and energy density of activated carbon in organic electrolyte supercapacitors?

  • Zhu, Jun-Jie
  • Benages‑Vilau, Raúl
  • Gómez-Romero, P.
Polyoxometalates (POMs) have been shown to work as faradaic additives to activated carbon (AC) in acidic aqueous electrolytes. Yet, their use in organic media allows not only for added capacity but also higher voltage. Here we show that the tetraethylammonium derivative of phosphotungstate [PW12O40]3− (PW12) can be homogeneously distributed throughout the pores of activated carbon (AC) in organic solvents such as N,N’-dimethylformamide (DMF) and demonstrate the use of this hybrid electrode material in an organic electrolyte (1 M TEABF4 in acetonitrile) supercapacitor. Our results show the efficient electroactivity of the PW12 cluster even in the absence of protons, providing a higher voltage than aqueous electrolytes and fast and reversible redox activity. The hybrid material shows a combination of double-layer (AC) and redox (PW12) capacities leading to an increase (36%) in volumetric capacitance with respect to pristine AC in the same organic electrolyte (1 M TEABF4 in acetonitrile). Remarkably, we were able to quantify this increase as coming predominantly from non-diffusion-limited processes thanks to the utterly dispersed nature of POMs. Moreover, the hybrid material delivers a good rate capability and excellent cycle stability (93% retention of the initial capacitance after 10,000 cycles). This study has a profound significance on improving capacitance of carbon-based materials in organic electrolytes., Partial funding from Ministry of Science, Innovation and Universities (MCIU), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) (grant RTI2018-099826-B-I00) and AGAUR (2017 SGR 00870) are gratefully acknowledged. ICN2 is funded by the CERCA programme / Generalitat de Catalunya, and it is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). J.J Z. acknowledges his scholarship (No. 201806370211) under China Scholarship Council. This work has been carried out within the framework of doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dramatic Drop in Cell Resistance through Induced Dipoles and Bipolar Electrochemistry

  • Fuentes Rodríguez, Laura
  • Abad Muñoz, Llibertat
  • Pujades Otero, Eulalia
  • Gómez-Romero, P.
  • Tonti, Dino
  • Casañ Pastor, Nieves
The use of slurries of conducting particles has been considered a way to extend the electrode area in some energy storage electrochemical cells. When suspensions of conducting particles are used in electrolytes a decreased impedance is observed, even for concentrations much lower than the theoretical percolation limits. Indeed, it is known that polarization occurs when a conducting material is immersed in an electrolyte in presence of electric fields, and bipolar electrochemistry processes may occur. This work demonstrates the dramatic drop in resistance for electrochemical cells with just a few macroscopic conducting pieces immersed in the electrolyte, in the absence of any electrical contact, through bipolar induction. Furthermore, mediation of soluble redox species between adjacent induced poles of opposite charge results in an additional mechanism for charge transfer, contributing further to the decrease in impedance. Relevant parameters like size, geometry, and spatial occupation of inducible pieces within the electric field, are relevant. Remarkably, the effects observed can explain some empirical observations previously reported for carbon suspensions and slurries. Thus, no electronic percolation requiring particle contact, nor ordering, are needed to explain the good performance associated to lowered impedance These results suggest new engineering designs for electrochemical cells with enhanced currents., The authors thank financing from the Ministry of Science of Spain (MAT2015-65192-R, and RTI2018-097753-B-I00, RTI2018-099826-B-I00, MAT2017-91404-EXP), and Severo Ochoa Program (SEV-2015-0496 and CEX2019-000917-S). LLA thanks the Ramon y Cajal Program contract (RYC-2013-12640)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF-derived conformal cobalt oxide/C composite material as high-performance electrode in hybrid supercapacitors

  • Hosseinzadeh, Batoul
  • Nagar, Bhawna
  • Benages‑Vilau, Raúl
  • Gómez-Romero, P.
  • Habib Kazemi, Sayed
By pyrolysis of a simple Cobalt Metal Organic Framework (MOF) we have been able to synthesize a high-performance hybrid composite electrode with fibrous morphology conformal to the MOF, in a single step and at relatively low temperature (700°C). Indeed, the composite material containing cobalt oxide micro-nano-particles in highly graphitized carbon matrix (cobalt oxide/C-700) presents superb capacity of 1372 F/g (381 mAh/g) at a current density of 2.5 A/g. Besides, an asymmetric supercapacitor (ASC) was fabricated by using the CoO/C-700 composite as positive electrode and activated carbon (AC) as negative electrode. This ASC system delivered maximum energy density of 51.5 Wh/kg and maximum power density of 1687 W/kg, ICN2 acknowledges support from Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/ Generalitat de Catalunya. Funding from the Spanish Ministry (MINECO/FEDER: RTI2018-099826-B-I00, Harvestorage) is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalates (POMs): From electroactive clusters to energy materials

  • Horn, Michael R.
  • Singh, Amandeep
  • Alomari, Suaad
  • Goberna-Ferrón, Sara
  • Benages‑Vilau, Raúl
  • Chodankar, Nilesh R.
  • Motta, Nunzio
  • Ostrikov, Kostya (Ken)
  • MacLeod, Jennifer
  • Sonar, Prashant
  • Gómez-Romero, P.
  • Dubal, Deepak P.
Polyoxometalates (POMs) represent a class of nanomaterials, which hold enormous promise for a range of energy-related applications. Their promise is owing to their "special"structure that gives POMs a truly unique ability to control redox reactions in energy conversion and storage. One such amazing capability is their large number of redox active sites that arises from the complex three-dimensional cluster of metal-oxide ions linked together by oxygen atoms. Here, a critical review on how POMs emerged from being molecular clusters for fundamental studies, to next-generation materials for energy applications is provided. We highlight how exploiting the versatility and activity of these molecules can lead to improved performance in energy devices such as supercapacitors and batteries, and in energy catalyst applications. The potential of POMs across numerous fields is systematically outlined by investigating structure-property-performance relationships and the determinant factors for energy systems. Finally, the challenges and opportunities for this class of materials with respect to addressing our pressing energy-related concerns are identified. This journal is, D. P. D. acknowledges the Queensland University of Technology (start-up grant: 323000-0424/07) and Australian Research Council (ARC), Australia for the Future Fellowship (FT180100058). D. P. D. would also like to acknowledge the financial support from Centre for Materials Science, QUT, Australia. N. M. acknowledges funding from ARC (DP200102546). Sara Goberna-Ferrón has received funding from the postdoctoral fellowship programme Beatriu de Pinós, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under the Marie Skłodowska-Curie grant agreement No 801370. Partial funding from Ministry of Science, Innovation and Universities (MCIU), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) (grant RTI2018-099826-B-I00) and AGAUR (2017 SGR 00870) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya, and it is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coherent Integration of Organic Gel Polymer Electrolyte and Ambipolar Polyoxometalate Hybrid Nanocomposite Electrode in a Compact High-Performance Supercapacitor

  • Zhu, Jun-Jie
  • Martínez-Soria, Luis
  • Gómez-Romero, P.
We report a gel polymer electrolyte (GPE) supercapacitor concept with improved pathways for ion transport, thanks to a facile creation of a coherent continuous distribution of the electrolyte throughout the electrode. Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) was chosen as the polymer framework for organic electrolytes. A permeating distribution of the GPE into the electrodes, acting both as integrated electrolyte and binder, as well as thin separator, promotes ion diffusion and increases the active electrode–electrolyte interface, which leads to improvements both in capacitance and rate capability. An activation process induced during the first charge–discharge cycles was detected, after which, the charge transfer resistance and Warburg impedance decrease. We found that a GPE thickness of 12 μm led to optimal capacitance and rate capability. A novel hybrid nanocomposite material, formed by the tetraethylammonium salt of the 1 nm-sized phosphomolybdate cluster and activated carbon (AC/TEAPMo12), was shown to improve its capacitive performance with this gel electrolyte arrangement. Due to the homogeneous dispersion of PMo12 clusters, its energy storage process is non-diffusion-controlled. In the symmetric capacitors, the hybrid nanocomposite material can perform redox reactions in both the positive and the negative electrodes in an ambipolar mode. The volumetric capacitance of a symmetric supercapacitor made with the hybrid electrodes increased by 40% compared to a cell with parent AC electrodes. Due to the synergy between permeating GPE and the hybrid electrodes, the GPE hybrid symmetric capacitor delivers three times more energy density at higher power densities and equivalent cycle stability compared with conventional AC symmetric capacitors., This research was funded by Ministerio de Ciencia Innovacion y Universidades (MCIU) grant number RTI2018-099826-B-I00, Spanish Research Agency (AEI) grant number SEV-2017-0706 and China Scholarship Council grant number 201806370211. And The APC was funded by CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rational design of MXene/activated carbon/polyoxometalate triple hybrid electrodes with enhanced capacitance for organic-electrolyte supercapacitors

  • Zhu, Jun-Jie
  • Hemesh, Avireddy
  • Jacas Biendicho, Jordi
  • Martínez-Soria, Luis
  • Rueda-García, Daniel
  • Morante, Joan Ramón
  • Ballesteros, Belén
  • Gómez-Romero, P.
We report a triple hybrid electrode (MXene/activated carbon (AC)/polyoxometalates (POMs)) combining the merits of three materials: MXene (high volumetric capacitance), AC (high gravimetric capacitance) and Phosphotungstate (fast redox). Phosphotungstic acid (HPW12) and tetraethylammonium phosphotungstate (TEAPW12) were the two POMs used to prepare MXene/AC/POMs triple hybrids. MXene/AC/TEAPW12 outperformed MXene/AC/HPW12 in 1 M tetraethylammonium tetrafluoroborate (TEABF4)/acetonitrile. Nano-dispersion of POMs facilitates charge storage through surface capacitive processes (91% at 2 mV s). MXene/AC/TEAPW12 delivered significantly higher gravimetric capacitance (87F g at 1 mV s) than MXene (40F g at 1 mV s) in the same organic electrolyte, without sacrificing much volumetric capacitance (less than 10%). The gravimetric capacitance of the triple hybrid was similar to that of MXene/AC, whereas its volumetric capacitance was 1.5 times higher. Replacing TEA cations with 1-ethyl-3-methylimidazolium cations (EMIM), the capacitance improved by 21%. Coupled with AC positive electrodes in an asymmetric cell, MXene/AC/TEAPW12 delivered 4.6 times higher gravimetric energy density and 3.5 times higher volumetric energy density than a similar MXene asymmetric cell at relatively high-power densities. This study proves that MXene/AC/TEAPW12 combines the merits and compensates for the demerits of each component and is a promising electrode material for organic-electrolyte supercapacitors., Partial funding from Ministry of Science, Innovation and Universities (MCIU), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) (grant RTI2018-099826- B-I00) and AGAUR (2017 SGR 00870, 2017 SGR 1246) are gratefully acknowledged. ICN2 and IREC are funded by the CERCA programme / Generalitat de Catalunya, and ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). J.J Z. acknowledges his scholarship (No. 201806370211) under China Scholarship Council.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate intercalated MXene with enhanced electrochemical stability

  • Zhu, Jun-Jie
  • Gómez-Romero, P.
MXene/polyoxometalate (POM) hybrids are useful target materials for a variety of applications. Yet, the goal of preparing simple binary hybrids by intercalation of POMs into MXene has not been achieved. We propose and demonstrate here a method to intercalate POMs (phosphotungstate, PW12) into TiCT MXene through the interaction between POM anions and pre-intercalated surfactant cations. A variety of quaternary ammonium cations have been used to expand TiCT interlayer spacing. Cetyltrimethylammonium cations (CTA) lead to an expansion of 2 nm while allowing intercalation of a considerable load (10 wt%) thanks to their tadpole-like shape and size. CTAPW12 has a layered structure compatible with TiCT. The CTA-delaminated TiCT keeps the large interlayer spacing after being coupled with PW12. The PW12 clusters are dispersed and kept isolated thanks to CTA surfactant and the confinement into TiCT layers. The redox reactions in CTA-delaminated TiCT/PW12 are diffusion-controlled, which proves the well-dispersed PW12 clusters are not adsorbed on the surface of TiCT particles but within TiCT layers. The CTA- delaminated TiCT/PW12 shows superior electrochemical stability (remaining redox active after 5000 cycles) over the other MXene/POM hybrids prepared in this work (inactive after 500 cycles). We associate this improved stability to the effective intercalation of PW12 within TiCT layers helped by the CTA cations, as opposed to the external aggregation of PW12 clusters into micro or nanocrystals taking place for the other cations. The results provide a solid guide to help develop high-performance MXene/POM hybrid materials for a variety of applications., Partial funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), the Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER) (grants RTI2018-099826-B-I00 and PID2021-128390OB-I00) is gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya, and also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). J. J Z. acknowledges his scholarship (no. 201806370211) under the China Scholarship Council. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autonoma de Barcelona (UAB).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

From thermal to electroactive graphene nanofluids

  • Rueda García, Daniel|||0000-0003-3539-1585
  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Cabán Huertas, Zahilia
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Here, we describe selected work on the development and study of nanofluids based on graphene and reduced graphene oxide both in aqueous and organic electrolytes. A thorough study of thermal properties of graphene in amide organic solvents (N,N-dimethylformamide, N,N-dimethylacetamide, and N-methyl-2-pyrrolidone) showed a substantial increase of thermal conductivity and specific heat upon graphene integration in those solvents. In addition to these thermal studies, our group has also pioneered a distinct line of work on electroactive nanofluids for energy storage. In this case, reduced graphene oxide (rGO) nanofluids in aqueous electrolytes were studied and characterized by cyclic voltammetry and charge-discharge cycles (i.e., in new flow cells). In addition, hybrid configurations (both hybrid nanofluid materials and hybrid cells combining faradaic and capacitive activities) were studied and are summarized here.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Can polyoxometalates enhance the capacitance and energy density of activated carbon in organic electrolyte supercapacitors?

  • Zhu, Jun-Jie|||0000-0002-8024-099X
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Polyoxometalates (POMs) have been shown to work as faradaic additives to activated carbon (AC) in acidic aqueous electrolytes. Yet, their use in organic media allows not only for added capacity but also higher voltage. Here we show that the tetraethylammonium derivative of phosphotungstate [PWO] (PW12) can be homogeneously distributed throughout the pores of activated carbon (AC) in organic solvents such as N,N'-dimethylformamide (DMF) and demonstrate the use of this hybrid electrode material in an organic electrolyte (1 M TEABF4 in acetonitrile) supercapacitor. Our results show the efficient electroactivity of the PW12 cluster even in the absence of protons, providing a higher voltage than aqueous electrolytes and fast and reversible redox activity. The hybrid material shows a combination of double-layer (AC) and redox (PW12) capacities leading to an increase (36%) in volumetric capacitance with respect to pristine AC in the same organic electrolyte (1 M TEABF4 in acetonitrile). Remarkably, we were able to quantify this increase as coming predominantly from non-diffusion-limited processes thanks to the utterly dispersed nature of POMs. Moreover, the hybrid material delivers a good rate capability and excellent cycle stability (93% retention of the initial capacitance after 10,000 cycles). This study has a profound significance on improving capacitance of carbon-based materials in organic electrolytes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coherent integration of organic gel polymer electrolyte and ambipolar polyoxometalate hybrid nanocomposite electrode in a compact high-performance supercapacitor

  • Zhu, Jun-Jie|||0000-0002-8024-099X
  • Martinez-Soria, Luis
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report a gel polymer electrolyte (GPE) supercapacitor concept with improved pathways for ion transport, thanks to a facile creation of a coherent continuous distribution of the electrolyte throughout the electrode. Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) was chosen as the polymer framework for organic electrolytes. A permeating distribution of the GPE into the electrodes, acting both as integrated electrolyte and binder, as well as thin separator, promotes ion diffusion and increases the active electrode-electrolyte interface, which leads to improvements both in capacitance and rate capability. An activation process induced during the first charge-discharge cycles was detected, after which, the charge transfer resistance and Warburg impedance decrease. We found that a GPE thickness of 12 μm led to optimal capacitance and rate capability. A novel hybrid nanocomposite material, formed by the tetraethylammonium salt of the 1 nm-sized phosphomolybdate cluster and activated carbon (AC/TEAPMo12), was shown to improve its capacitive performance with this gel electrolyte arrangement. Due to the homogeneous dispersion of PMo12 clusters, its energy storage process is non-diffusion-controlled. In the symmetric capacitors, the hybrid nanocomposite material can perform redox reactions in both the positive and the negative electrodes in an ambipolar mode. The volumetric capacitance of a symmetric supercapacitor made with the hybrid electrodes increased by 40% compared to a cell with parent AC electrodes. Due to the synergy between permeating GPE and the hybrid electrodes, the GPE hybrid symmetric capacitor delivers three times more energy density at higher power densities and equivalent cycle stability compared with conventional AC symmetric capacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polyoxometalate intercalated MXene with enhanced electrochemical stability

  • Zhu, Jun-Jie|||0000-0002-8024-099X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
MXene/polyoxometalate (POM) hybrids are useful target materials for a variety of applications. Yet, the goal of preparing simple binary hybrids by intercalation of POMs into MXene has not been achieved. We propose and demonstrate here a method to intercalate POMs (phosphotungstate, PW12) into TiCT MXene through the interaction between POM anions and pre-intercalated surfactant cations. A variety of quaternary ammonium cations have been used to expand TiCT interlayer spacing. Cetyltrimethylammonium cations (CTA) lead to an expansion of 2 nm while allowing intercalation of a considerable load (10 wt%) thanks to their tadpole-like shape and size. CTAPW12 has a layered structure compatible with TiCT. The CTA-delaminated TiCT keeps the large interlayer spacing after being coupled with PW12. The PW12 clusters are dispersed and kept isolated thanks to CTA surfactant and the confinement into TiCT layers. The redox reactions in CTA-delaminated TiCT/PW12 are diffusion-controlled, which proves the well-dispersed PW12 clusters are not adsorbed on the surface of TiCT particles but within TiCT layers. The CTA- delaminated TiCT/PW12 shows superior electrochemical stability (remaining redox active after 5000 cycles) over the other MXene/POM hybrids prepared in this work (inactive after 500 cycles). We associate this improved stability to the effective intercalation of PW12 within TiCT layers helped by the CTA cations, as opposed to the external aggregation of PW12 clusters into micro or nanocrystals taking place for the other cations. The results provide a solid guide to help develop high-performance MXene/POM hybrid materials for a variety of applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Rational design of MXene/activated carbon/polyoxometalate triple hybrid electrodes with enhanced capacitance for organic-electrolyte supercapacitors

  • Zhu, Jun-Jie|||0000-0002-8024-099X
  • Hemesh, Avireddy
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Martinez-Soria, Luis
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report a triple hybrid electrode (MXene/activated carbon (AC)/polyoxometalates (POMs)) combining the merits of three materials: MXene (high volumetric capacitance), AC (high gravimetric capacitance) and Phosphotungstate (fast redox). Phosphotungstic acid (HPW12) and tetraethylammonium phosphotungstate (TEAPW12) were the two POMs used to prepare MXene/AC/POMs triple hybrids. MXene/AC/TEAPW12 outperformed MXene/AC/HPW12 in 1 M tetraethylammonium tetrafluoroborate (TEABF4)/acetonitrile. Nano-dispersion of POMs facilitates charge storage through surface capacitive processes (91% at 2 mV s). MXene/AC/TEAPW12 delivered significantly higher gravimetric capacitance (87F g at 1 mV s) than MXene (40F g at 1 mV s) in the same organic electrolyte, without sacrificing much volumetric capacitance (less than 10%). The gravimetric capacitance of the triple hybrid was similar to that of MXene/AC, whereas its volumetric capacitance was 1.5 times higher. Replacing TEA cations with 1-ethyl-3-methylimidazolium cations (EMIM), the capacitance improved by 21%. Coupled with AC positive electrodes in an asymmetric cell, MXene/AC/TEAPW12 delivered 4.6 times higher gravimetric energy density and 3.5 times higher volumetric energy density than a similar MXene asymmetric cell at relatively high-power densities. This study proves that MXene/AC/TEAPW12 combines the merits and compensates for the demerits of each component and is a promising electrode material for organic-electrolyte supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polyoxometalates (POMs), from electroactive clusters to energy materials

  • Horn, Michael R.|||0000-0002-2499-1481
  • Singh, Amandeep|||0000-0001-7316-774X
  • Alomari, Suaad
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Benages-Vilau, Raúl|||0000-0003-0875-124X
  • Chodankar, Nilesh R.|||0000-0002-1174-2064
  • Motta, Nunzio|||0000-0002-3857-1031
  • Ostrikov, Kostya|||0000-0001-8672-9297
  • Macleod, Jennifer|||0000-0002-2138-8716
  • Sonar, Prashant|||0000-0002-1119-4897
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Dubal, Deepak P.|||0000-0002-2337-676X
Polyoxometalates (POMs) represent a class of nanomaterials, which hold enormous promise for a range of energy-related applications. Their promise is owing to their "special"structure that gives POMs a truly unique ability to control redox reactions in energy conversion and storage. One such amazing capability is their large number of redox active sites that arises from the complex three-dimensional cluster of metal-oxide ions linked together by oxygen atoms. Here, a critical review on how POMs emerged from being molecular clusters for fundamental studies, to next-generation materials for energy applications is provided. We highlight how exploiting the versatility and activity of these molecules can lead to improved performance in energy devices such as supercapacitors and batteries, and in energy catalyst applications. The potential of POMs across numerous fields is systematically outlined by investigating structure-property-performance relationships and the determinant factors for energy systems. Finally, the challenges and opportunities for this class of materials with respect to addressing our pressing energy-related concerns are identified.