Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic Polyradicals as Redox Mediators: Effect of Intramolecular Radical Interactions on Their Efficiency

  • Badetti, Elena
  • Lloveras, Vega
  • Amadio, Emanuele
  • Lorenzo, Rosalia Di
  • Olivares, Mara
  • Tesio, Alvaro Y.
  • Zhang, Songbai
  • Pan, Fangfang
  • Rissanen, Kari
  • Veciana, Jaume
  • Tonti, Dino
  • Vidal Gancedo, José
  • Licini, Giulia
  • Zonta, Cristiano
The spin–spin interactions between unpaired electrons in organic (poly)radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of spin–spin interaction effect in such an area is absent. This communication reports the preparation of a novel family of discrete polynitroxide molecules, with the same number of radical units but different arrangements to study the effect of intramolecular spin–spin interactions on their electrochemical potential and their use as oxidation redox mediators in a Li–oxygen battery. We find that the intensity of interactions, as measured by the d1/d electron paramagnetic resonance parameter, progressively lowers the reduction potential. This allows us to tune the charging potential of the battery, optimizing its energy efficiency., This work was supported by: DGICT-MINECO (MAT2016-80826-R, MAT2017-91404-EXP, RTI2018-09273-B-I00), AGAUR (2017 SGR 918, 2014 SGR 1505, 2017 SGR 1687) and University of Padova. ICMAB acknowledges Spanish MINECO through the Severo Ochoa Centres of Excellence Programme Grant SEV- 2015-0496 and S.Z. his CSC grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft X-ray Transmission Microscopy on Lithium-Rich Layered-Oxide Cathode Materials

  • Sorrentino, Andrea
  • Simonelli, Laura
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Pereiro, Eva
  • Passerini, Stefano
  • Giorgetti, Marco
  • Tonti, Dino
Energy-dependent full field transmission soft X-ray microscopy (TXM) is able to give a full picture at the nanometer scale of the chemical state and spatial distribution of oxygen and other elements relevant for battery materials, providing pixel-by-pixel absorption spectrum. We show different methods to localize chemical inhomogeneities in Li1.2Mn0.56Ni0.16Co0.08O2 particles with and without VOx coating extracted from electrodes at different states of charge. Considering the 3d(Mn,Ni)-2p(O) hybridization, it has been possible to discriminate the chemical state of Mn and Ni in addition to the one of O. Different oxidation states correspond to specific features in the O-K spectra. To localize sample regions with specific compositions we apply two different methods. In the first, the pixel-by-pixel ratios of images collected at different key energies clearly highlight local inhomogeneities. In the second, introduced here for the first time, we directly correlate corresponding pixels of the two images on a xy scatter plot that we call phase map, where we can visualize the distributions as function of thickness as well as absorption artifacts. We can select groups of pixels, and then map regions with similar spectral features. Core-shell distributions of composition are clearly shown in these samples. The coating appears in part to frustrate some of the usual chemical evolution. In addition, we could directly observe several further aspects, such as: distribution of conducting carbon; inhomogeneous state of charge within the electrode; molecular oxygen profiles within a particle. The latter suggests a surface loss with respect to the bulk but an accumulation layer at intermediate depth that could be assigned to retained O2., This research was funded by Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00 and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local interactions governing the performance of lithium- and manganese-rich cathodes

  • Ali, Shehab E.
  • Olszewski, Wojciech
  • Sorrentino, Andrea
  • Marini, Carlo
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Passerini, Stefano
  • Tonti, Dino
  • Simonelli, Laura
The local structural and electronical transformations occurring along the first charge and discharge cycle of Li- and Mn-rich Li[Li0.2Ni0.16Mn0.56Co0.08]O2 cathode material have been characterized by X-ray absorption spectroscopy at several complementary edges. The irreversible spinel formation, occurring at the expenses of the cycling layered phase during the first charge, is quantified (about 10%) and spatially localized. The local strains induced by the Ni oxidation have been evaluated. They induce the formation of a low spin Mn3+ in the layered structure in parallel to the irreversible formation of the spinel phase in the particles bulk. The charge balance has been quantified for all the elements along the first charging cycle, confirming a reversible oxygen oxidation along the charge. Overall, these quantitative results provide an experimental basis for modeling aimed to control the structure and its evolution, for instance, hindering the spinel formation for the benefit of the material cycle life., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00, and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbons derived from alcohol-treated bacterial cellulose with optimal porosity for LieO2 batteries

  • Wang, Wenhai
  • Khabazian, Siavash
  • Roig Sánchez, Soledad
  • Laromaine, Anna
  • Roig Serra, Anna
  • Tonti, Dino
Porous carbons are important cathode materials for metal-air batteries, but the most usual methods to prepare these porous structures are complex and of high cost. We have prepared porous carbons from bacterial cellulose (BC) hydrogels by a simple water-alcohol solvent exchange before carbonization. Alcohol treatment facilitates looser and more open structures than untreated BC, resulting in porous carbon structures with high surface area, appropriate for electrochemical applications. Used as cathodes in lithium-oxygen batteries, the carbon derived from 1-butanol treated BC has excellent discharge capacity (5.6 mA h cm−2) and good cycle life. This work presents a sustainable, straightforward and fast way to prepare porous carbon materials from BC., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S), the projects MAT2017-91404-EXP and RTI2018-096273-B-I00 and the PhD scholarships of S. R. (BES-2016-077533) with FEDER co-funding. W.W. gratefully acknowledges the support from the China Scholarship Council (CSC No.:201808340076). The authors participate in the SusPlast and FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC) and in the Aerogels COST ACTION (CA 18125). They also acknowledge the Generalitat de Catalunya (2017SGR765 and 2017SGR1687 grants). This work has been performed within the framework of the doctoral program in materials science of UAB (W. W. and S.R–S.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dramatic Drop in Cell Resistance through Induced Dipoles and Bipolar Electrochemistry

  • Fuentes Rodríguez, Laura
  • Abad Muñoz, Llibertat
  • Pujades Otero, Eulalia
  • Gómez-Romero, P.
  • Tonti, Dino
  • Casañ Pastor, Nieves
The use of slurries of conducting particles has been considered a way to extend the electrode area in some energy storage electrochemical cells. When suspensions of conducting particles are used in electrolytes a decreased impedance is observed, even for concentrations much lower than the theoretical percolation limits. Indeed, it is known that polarization occurs when a conducting material is immersed in an electrolyte in presence of electric fields, and bipolar electrochemistry processes may occur. This work demonstrates the dramatic drop in resistance for electrochemical cells with just a few macroscopic conducting pieces immersed in the electrolyte, in the absence of any electrical contact, through bipolar induction. Furthermore, mediation of soluble redox species between adjacent induced poles of opposite charge results in an additional mechanism for charge transfer, contributing further to the decrease in impedance. Relevant parameters like size, geometry, and spatial occupation of inducible pieces within the electric field, are relevant. Remarkably, the effects observed can explain some empirical observations previously reported for carbon suspensions and slurries. Thus, no electronic percolation requiring particle contact, nor ordering, are needed to explain the good performance associated to lowered impedance These results suggest new engineering designs for electrochemical cells with enhanced currents., The authors thank financing from the Ministry of Science of Spain (MAT2015-65192-R, and RTI2018-097753-B-I00, RTI2018-099826-B-I00, MAT2017-91404-EXP), and Severo Ochoa Program (SEV-2015-0496 and CEX2019-000917-S). LLA thanks the Ramon y Cajal Program contract (RYC-2013-12640)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

  • Wang, Wenhai
  • Tesio, Alvaro Y.
  • Olivares-Marín, Mara|||0000-0002-9797-7904
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Tonti, Dino|||0000-0003-0240-1011
A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source, cobalt nitrate and distilled water. After heating the mixture to 300 °C under magnetic stirring, a dry solid product was obtained, which was then carbonized at 900 ºC under argon atmosphere. Changing the glycine/Co molar ratio allowed controlling the size of the cobalt particles and their dispersion in the carbon matrix, the porosity of the carbon and its graphitic character. The carbon-metal composites obtained were tested as oxygen cathodes in Li-O batteries. Cells assembled exhibited a full discharge capacity up to 2.19 mAh cm at a current of 0.05 mA cm and over 39 cycles at a cutoff capacity of 0.5 mAh cm. This work provides a green, feasible and simple way to prepare mesoporous graphitic carbons with embedded cobalt nanoparticles without involving templates.