Pasar al contenido principal

DISEÑO DE MATERIALES AVANZADOS PARA SISTEMAS ELECTROQUIMICOS DE CONVERSION Y ALMACENAMIENTO DE ENERGIA: UNA APROXIMACION NANOTECNOLOGICA.

MAT2013-41128-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potassium Salts as Electrolyte Additives in Lithium-Oxygen Batteries

  • Landa, Imanol
  • Olivares, Mara
  • Bergner, Benjamin
  • Pinedo, Ricardo
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Ruiz de Larramendi, Idoia
  • Janek, Jürgen
  • Rojo, Teófilo
  • Tonti, Dino
The stabilization of the intermediates formed during oxygen reduction reaction and their efficient solubilization and diffusion is a crucial issue that needs to be improved in non-aqueous lithium oxygen batteries. By adding 0.1 M K+ (as KOTf salt) to the electrolyte we have observed remarkable improvements in the rate capability of the discharge process. The K+ cation facilitates a more homogeneous discharge product deposition in the porous cathode. Instead, as evidenced by synchrotron measurements, we find that K+ does not influence the cell chemistry, suggesting that it rather assists the superoxide solvation, thus enhancing the solution-based growth of the discharge products. In addition, if iodide (I-) is added as redox mediator we find an extended cycle life when K+ instead of Li+ is used as cation. This finding remarks the benefits of stabilizing the oxygen reduction products in the electrolyte leading to a solution-based mechanism., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), through projects MAT2013-41128-R, MAT2016-78266-P, MAT2015-68394-R, by the “Fondo Europeo de Desarrollo Regional” (FEDER), by the Eusko Jaurlaritza/Gobierno Vasco (through project IT-570-13), and by the Generalitat de Catalunya (grant 2014 SGR 1505). I. Landa-Medrano thanks the Universidad del País Vasco (UPV/EHU) for his predoctoral fellowship. M. Olivares-Marín acknowledges CSIC for a JAE-DOC research contract co-funded by the European Social Fund. J. Janek acknowledges financial support by BMBF (Federal Ministry of Education and Research) within the project BENCHBATT. The xray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical synthesis and magnetic properties of monodisperse nickel ferrite nanoparticles for biomedical applications

  • Insausti, Maite
  • Plazaola, Fernando
  • Moros, María
  • De Matteis, Laura
  • Fuente, Jesús M. de la
With the aim of improving the response in magnetic hyperthermia treatments and other biomedical applications, a nanoparticle system based on nickel ferrites has been investigated. Monodisperse ferrite nanoparticles with different proportions of Ni ions and sizes have been produced by an optimized synthesis based on the thermal decomposition method and the seed-growth technique. All samples were chemically and structurally characterized by different methods, and the magnetic behavior has been analyzed by means of field and temperature dependent magnetization measurements and electronic magnetic resonance. It has been proved that low proportions of Ni cation in the structure favors high saturation magnetization values and a reduction of the magnetic anisotropy constant. The optimized nanoparticles were transferred to water. Such nanoparticles are innocuous at concentrations up to 0.5 mg/mL and are convenient MRI contrast agents. Those samples with lower percentages of Ni atoms and bigger particle sizes presented the highest specific absorption rate, and, for instance, they are the most adequate for magnetic hyperthermia applications., This work was supported by institutional funding from the Ministerio de Educacion y Ciencia and Basque Government under Projects MAT2013-41128-R and GIC-IT-570-13., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Architecture of Na-O2 battery deposits revealed by transmission X-ray microscopy

  • Landa Medrano, Imanol
  • Sorrentino, Andrea
  • Stievano, Lorenzo
  • Ruiz de Larramendi, Idoia
  • Pereiro, Eva
  • Lezama, Luis
  • Rojo, Teófilo
  • Tonti, Dino
The microstructure and chemical composition of the discharge products generated in sodium-oxygen batteries are analyzed by transmission X-ray microscopy (TXM) revealing a complex architecture. Unexpectedly, sodium peroxide is detected in the cubic-shaped discharge deposits associated with the often reported sodium superoxide. Analyses on the product distribution show a surface layer rich in decomposition products in contact with an O-deficient region enclosing the bulk of these cubes. In addition, we show that oxygen evolution reaction (OER) occurs by a process that involves oxidation and re-dissolution of the bulk fraction, leading to a contraction of the discharge particles and a composition similar to that found in the intermediate phase of the deposits observed at the end of discharge. All these solid compounds are eventually removed at the end of recharge, but formation of these structures evidence possible irreversible pathways that need to be considered for the cycle life improvement., The X-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. Work was funded by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), and through projects MAT2015-68394-R, MAT2013-41128-R, MAT2016-78266-P, by the Generalitat de Catalunya (grant 2014 SGR 1505), the "Fondo Europeo de Desarrollo Regional" (FEDER) and the Eusko Jaurlaritza/Gobierno Vasco (under project IT-570-13). I.L.M. thanks the Universidad del País Vasco (UPV/EHU) for his predoctoral and postdoctoral fellowships., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed