Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

What do you do, titanium? Insight into the role of titanium oxide as a water oxidation promoter in hematite-based photoanodes

  • Monllor-Satoca, Damián
  • Bärtsch, Mario
  • Fàbrega, Cristian
  • Genç, Aziz
  • Reinhard, Sandra
  • Andreu, Teresa
  • Arbiol, Jordi
  • Niederberger, Markus
  • Morante, Joan Ramon
  • Monllor-Satoca, Damián|||/items/ad103271-d5d2-4d69-8944-a59d0a0be58c
Hematite (α-Fe2O3) is a promising photoanode in solar water splitting devices with a set of intrinsic limitations that lessen its maximum performance; among the methods used for improving its photoactivity, titanium doping has witnessed an intensive research during recent years. However, the origin of the Ti-induced enhancement remains elusive to date with the lack of a systematic mechanistic study. In this contribution, we prepared mesoporous hematite (host)–titania (guest) composite films by mixing the respective preformed nanoparticles obtained by a non-aqueous sol–gel route in a wide range of loading levels (0–20 mol%) up to the solid state solubility limits of both components. Voltammetric and impedance measurements were performed observing an optimum 10% doping, with a 15-fold photocurrent increase (up to 1.3 mA cm−2 at 1.23 VRHE) and a 100-fold decrease in the charge transfer resistance. The roles of surface states and charge donor (dopant) densities were also assessed, assuming a charge transfer mechanism through hole trapping at surface states and its isoenergetic transfer to water; an optimum 10–15% doping range was obtained similarly to photocurrent, where the maximum overlapping between surface and water states is prevalent. Finally, HR-TEM and EELS measurements were employed to detect the presence of pseudobrookite and titania phases (20% doping), evincing that hematite–pseudobrookite heterojunctions have a beneficial cascade of charge transfers but titania-pseudobrookite heterojunctions depict a deleterious “hole mirror” mechanism that prevents water photooxidation. Tailoring the combined effect of donor states (conductivity), phase coexistence (solubility), heterojunctions (energetics) and surface states (kinetics) in the composite paves the way for understanding the mechanism of other dopant-induced changes and could be extended to further photoactive materials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High yield of GaAs nanowire arrays on Si mediated by the pinning and contact angle of Ga

  • Russo-Averchi, Eleonora
  • Mata, Maria de la
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
GaAs nanowire arrays on silicon offer great perspectives in the optoelectronics and solar cell industry. To fulfill this potential, gold-free growth in predetermined positions should be achieved. Ga-assisted growth of GaAs nanowires in the form of array has been shown to be challenging and difficult to reproduce. In this work, we provide some of the key elements for obtaining a high yield of GaAs nanowires on patterned Si in a reproducible way: contact angle and pinning of the Ga droplet inside the apertures achieved by the modification of the surface properties of the nanoscale areas exposed to growth. As an example, an amorphous silicon layer between the crystalline substrate and the oxide mask results in a contact angle around 90°, leading to a high yield of vertical nanowires. Another example for tuning the contact angle is anticipated, native oxide with controlled thickness. This work opens new perspectives for the rational and reproducible growth of GaAs nanowire arrays on silicon., The authors thank the NCCR QSIT and the ERANet RUS Project InCoSiN PRI-PIMERU-2011-1422. They acknowledge European funding from ERC through grant UpCon, EU through FP7 project Nanoembrace, as well as SNF through the NCCR-QSIT and grants 121758/1 and 129775/1. S.C.B. thanks funding through the SNF Marie Heim-Vogtlin program. J.A. acknowledges the funding from the Generalitat de Catalunya 2014 SGR 1638. M.d.l.M. thanks the CSIC JaePredoc program. J.A. and M.d.l.M. thank funding from Spanish MINECO MAT2014-51480-ERC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lived excitons in GaN/AlN nanowire heterostructures

  • Beeler, M.
  • Lim, C. B.
  • Hille, Pascal
  • Schörmann, Jörg
  • Mata, Maria de la
  • Arbiol, Jordi
  • Eickhoff, Martin
  • Monroy, Eva
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., GaN/AlN nanowire heterostructures can display photoluminescence (PL) decay times on the order of microseconds that persist up to room temperature. Doping the GaN nanodisk insertions with Ge can reduce these PL decay times by two orders of magnitude. These phenomena are explained by the three-dimensional electric field distribution within the GaN nanodisks, which has an axial component in the range of a few MV/cm associated to the spontaneous and piezoelectric polarization, and a radial piezoelectric contribution associated to the shear components of the lattice strain. At low dopant concentrations, a large electron-hole separation in both the axial and radial directions is present. The relatively weak radial electric fields, which are about one order of magnitude smaller than the axial fields, are rapidly screened by doping. This bidirectional screening leads to a radial and axial centralization of the hole underneath the electron, and consequently, to large decreases in PL decay times, in addition to luminescence blue shifts., This work is supported by the EU ERC-StG “TeraGaN” (#278428) project, the LOEWE program of excellence of the Federal State of Hessen (project initiative STORE-E), and by the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Generalitat de Catalunya 2014SGR1638. J.A. thanks ICN2 Severo Ochoa Excellence Program. MdlM thanks CSIC JaePredoc program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Position-controlled growth of GaN nanowires and nanotubes on diamond by molecular beam epitaxy

  • Schuster, Fabian
  • Mata, Maria de la
  • Magén, César
  • Arbiol, Jordi
  • Stutzmann, Martin
In this work the position-controlled growth of GaN nanowires (NWs) on diamond by means of molecular beam epitaxy is investigated. In terms of growth, diamond can be seen as a model substrate, providing information of systematic relevance also for other substrates. Thin Ti masks are structured by electron beam lithography which allows the fabrication of perfectly homogeneous GaN NW arrays with different diameters and distances. While the wurtzite NWs are found to be Ga-polar, N-polar nucleation leads to the formation of tripod structures with a zinc-blende core which can be efficiently suppressed above a substrate temperature of 870 °C. A variation of the III/V flux ratio reveals that both axial and radial growth rates are N-limited despite the globally N-rich growth conditions, which is explained by the different diffusion behavior of Ga and N atoms. Furthermore, it is shown that the hole arrangement has no effect on the selectivity but can be used to force a transition from nanowire to nanotube growth by employing a highly competitive growth regime., Financial support from the Deutsche Forschungsgemeinschaft (DFG) via the Forschergruppe 1493, TUM.solar in the frame of the Bavarian Collaborative Research Project “Solar technologies go Hybrid” (SolTec), and the excellence program Nanosystems Initiative Munich is gratefully acknowledged. The authors thank the group of C.E. Nebel at Fraunhofer IAF in Freiburg for supplying the SCD diamond substrates. J.A. acknowledges the funding from the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Generalitat de Catalunya 2014SGR1638. MdlM thanks the CSIC Jae-Predoc program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, María
  • Luo, ZhiShan
  • Genç, Aziz
  • Arbiol, Jordi
  • Cabot, Andreu
et al., The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K., At IREC, work was supported by European Regional Development Funds and the Framework 7 program under project UNION (FP7-NMP 310250). M.I. and S.O. thank AGAUR for their Beatriu i Pinos post-doctoral grant (2013 BP-A00344) and the PhD grant, respectively. A.G. thanks to the Turkish Ministry of National Education for the PhD grant. A.G. and J.A. acknowledge the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and the ICN2 Severo Ochoa Excellence Program. Z.L. and Y.L. thanks the China Scholarship Council for their PhD grant. IREC and ICN2 groups acknowledge the funding from Generalitat de Catalunya 2014SGR1638. The work performed at Rutgers was supported by NSF grant number 1400246. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer-enhanced stability of inorganic perovskite nanocrystals and their application in color conversion LEDs

  • Meyns, Michaela
  • Ibáñez, María
  • Nafria, Raquel
  • Genç, Aziz
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kanaras, Antonio G.
et al., Cesium lead halide (CsPbX, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics., This work was supported by the European Regional Development Funds, the Framework 7 program under project UNION (FP7-NMP-2012-310250) and HI-LED (FP7-ICT-2013-11-619912), as well as the Spanish MINECO Projects BOOSTER (ENE2013-46624-C4-3-R) and AMALIE (TEC2012-38901-C02-01). M.M. thanks the Spanish MINECO for financial support through the Juan de la Cierva-formacion program. A.G. and J.A. acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface hydrogen enables subeutectic vapor-liquid-solid semiconductor nanowire growth

  • Sivaram, Saujan V.
  • Hui, Ho Yee
  • Mata, Maria de la
  • Arbiol, Jordi
  • Filler, Michael A.
Vapor-liquid-solid nanowire growth below the bulk metal-semiconductor eutectic temperature is known for several systems; however, the fundamental processes that govern this behavior are poorly understood. Here, we show that hydrogen atoms adsorbed on the Ge nanowire sidewall enable AuGe catalyst supercooling and control Au transport. Our approach combines in situ infrared spectroscopy to directly and quantitatively determine hydrogen atom coverage with a >regrowth> step that allows catalyst phase to be determined with ex situ electron microscopy. Maintenance of a supercooled catalyst with only hydrogen radical delivery confirms the centrality of sidewall chemistry. This work underscores the importance of the nanowire sidewall and its chemistry on catalyst state, identifies new methods to regulate catalyst composition, and provides synthetic strategies for subeutectic growth in other nanowire systems., M.A.F., S.V.S., and H.Y.H. gratefully acknowledge the financial support of the National Science Foundation (#1133563 and #1150755). S.V.S. and H.Y.H. also thank the NSF IGERT program (#1069138) and the Archibald McNeill Endowment at Georgia Tech, respectively, for additional support. The HAADF-STEM microscopy was conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza. J.A. and M.d.l.M. thank them for offering access to their instruments and expertise. JA and MdlM acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the plasmonic response up: Hollow cuboid metal nanostructures

  • Genç, Aziz
  • Patarroyo, Javier
  • Arenal, Raúl
  • González, Edgar
  • Bastús, Neus G.
  • Dunin-Borkowski, Rafal E.
  • Puntes, Víctor F.
  • Arbiol, Jordi
ACS AuthorChoice - This is an open access article published under an ACS AuthorChoice License.-- et al., We report the fine-tuning of the localized surface plasmon resonances (LSPRs) from ultraviolet to near-infrared by nanoengineering the metal nanoparticle morphologies from solid Ag nanocubes to hollow AuAg nanoboxes and AuAg nanoframes. Spatially resolved mapping of plasmon resonances by electron energy loss spectroscopy (EELS) revealed a homogeneous distribution of highly intense plasmon resonances around the hollow nanostructures and the interaction, that is, hybridization, of inner and outer plasmon fields for the nanoframe. Experimental findings are accurately correlated with the boundary element method (BEM) simulations demonstrating that the homogeneous distribution of the plasmon resonances is the key factor for their improved plasmonic properties. As a proof of concept for these enhanced plasmonic properties, we show the effective label free sensing of bovine serum albumin (BSA) of single-walled AuAg nanoboxes in comparison with solid Au nanoparticles, demonstrating their excellent performance for future biomedical applications., J.A. and A.G. acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638 and Spanish MICINN Project eATOM (MAT2014-51480-ERC). A.G. acknowledges the Turkish Ministry of National Education for the Ph.D. scholarship. J.P., N.G.B., and V.P. acknowledge financial support from the Generalitat de Catalunya 2014-SGR-612, Spanish MICINN (MAT2012-33330), and European Community (EU-FP7) through the FutureNanoNeeds project. N.G.B. thanks the Spanish MICINN for the financial support through the Juan de la Cierva program and European Commission for the Career Integration Grant (CIG)-Marie Curie Action. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative − I3)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twin-induced InSb nanosails: A convenient high mobility quantum system

  • Mata, Maria de la
  • Leturcq, Renaud
  • Plissard, Sebastien R.
  • Rolland, Chloé
  • Magén, César
  • Arbiol, Jordi
  • Caroff, Philippe
Ultra narrow bandgap III-V semiconductor nanomaterials provide a unique platform for realizing advanced nanoelectronics, thermoelectrics, infrared photodetection, and quantum transport physics. In this work we employ molecular beam epitaxy to synthesize novel nanosheet-like InSb nanostructures exhibiting superior electronic performance. Through careful morphological and crystallographic characterization we show how this unique geometry is the result of a single twinning event in an otherwise pure zinc blende structure. Four-terminal electrical measurements performed in both the Hall and van der Pauw configurations reveal a room temperature electron mobility greater than 12 000 cm·V·s. Quantized conductance in a quantum point contact processed with a split-gate configuration is also demonstrated. We thus introduce InSb >nanosails> as a versatile and convenient platform for realizing new device and physics experiments with a strong interplay between electronic and spin degrees of freedom., This research was supported in part by the French ANR through the TERADOT Project No. ANR-11-JS04-002-01, the Ministry of Higher Education and Research, Nord-Pas de Calais and Mid-Pyrené es Regional Council and FEDER through the “Contrat de Projets Etat Region (CPER) 2007−2013”, IDEX WirOnSi, the Australian Research Council, through the Future Fellowship program, grant number FT120100498, the Generalitat de Catalunya 2014 SGR 1638, the Spanish MINECO MAT2014-51480-ERC (e-ATOM), and the ICN2 Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UV photosensing characteristics of nanowire-based GaN/AlN superlattices

  • Lähnemann, Jonas
  • Den Hertog, Martien
  • Hille, Pascal
  • Mata, Maria de la
  • Fournier, Thierry
  • Schörmann, Jörg
  • Arbiol, Jordi
  • Eickhoff, Martin
  • Monroy, Eva
arXiv:1604.07978v2, We have characterized the photodetection capabilities of single GaN nanowires incorporating 20 periods of AlN/GaN:Ge axial heterostructures enveloped in an AlN shell. Transmission electron microscopy confirms the absence of an additional GaN shell around the heterostructures. In the absence of a surface conduction channel, the incorporation of the heterostructure leads to a decrease of the dark current and an increase of the photosensitivity. A significant dispersion in the magnitude of dark currents for different single nanowires is attributed to the coalescence of nanowires with displaced nanodisks, reducing the effective length of the heterostructure. A larger number of active nanodisks and AlN barriers in the current path results in lower dark current and higher photosensitivity and improves the sensitivity of the nanowire to variations in the illumination intensity (improved linearity). Additionally, we observe a persistence of the photocurrent, which is attributed to a change of the resistance of the overall structure, particularly the GaN stem and cap sections. As a consequence, the time response is rather independent of the dark current., Financial support from the EU ERC-SG “TeraGaN” (#278428) and ANR JCJC COSMOS (ANR-12-JS10-0002) is acknowledged. Furthermore, the groups in Grenoble and Giessen received traveling support from the DAAD/Campus France program Procope. P.H., J.S., and M.E. acknowledge financial support within the LOEWE program of excellence of the Federal State of Hessen (project initiative STORE-E). M.d.l.M. and J.A. acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO MAT2014-51480-ERC (e-ATOM) and Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hollow metal nanostructures for enhanced plasmonics: synthesis, local plasmonic properties and applications

  • Genç, Aziz
  • Patarroyo, Javier
  • Sancho-Parramon, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
  • Arbiol, Jordi
Metallic nanostructures have received great attention due to their ability to generate surface plasmon resonances, which are collective oscillations of conduction electrons of a material excited by an electromagnetic wave. Plasmonic metal nanostructures are able to localize and manipulate the light at the nanoscale and, therefore, are attractive building blocks for various emerging applications. In particular, hollow nanostructures are promising plasmonic materials as cavities are known to have better plasmonic properties than their solid counterparts thanks to the plasmon hybridization mechanism. The hybridization of the plasmons results in the enhancement of the plasmon fields along with more homogeneous distribution as well as the reduction of localized surface plasmon resonance (LSPR) quenching due to absorption. In this review, we summarize the efforts on the synthesis of hollow metal nanostructures with an emphasis on the galvanic replacement reaction. In the second part of this review, we discuss the advancements on the characterization of plasmonic properties of hollow nanostructures, covering the single nanoparticle experiments, nanoscale characterization via electron energy-loss spectroscopy and modeling and simulation studies. Examples of the applications, i.e. sensing, surface enhanced Raman spectroscopy, photothermal ablation therapy of cancer, drug delivery or catalysis among others, where hollow nanostructures perform better than their solid counterparts, are also evaluated., J.A. and A.G. acknowledge the funding from Generalitat de Catalunya 2014 SGR 1638 and Spanish MICINN project e-ATOM (MAT2014-51480-ERC). J.P., N.G.B., and V.P. acknowledge financial support from the Generalitat de Catalunya 2014-SGR-612, Spanish MICINN (MAT2012-33330) and European Community (EU-FP7) through the FutureNanoNeeds project. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991) and by the European Commission Seventh Framework Programme (FP7) through the Marie Curie Career Integration Grant (322153-MINE). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

InAs/InSb: From nanowires to nanomembranes

  • Mata, Maria de la
  • Leturcq, Renaud
  • Plissard, Sebastien R.
  • Rolland, Chloé
  • Magén, César
  • Caroff, Philippe
  • Arbiol, Jordi
Resumen del trabajo presentado al 16th European Microscopy Congress, celebrado en Lyon (Francia) del 28 de agosto al 2 de septiembre de 2016., The control over crystalline defects is of extreme importance when growing functional materials, since their presence may alter the final behavior (opto-electronic properties) and evolution of the growing system (orientation and shape). In the present work we address both phenomena in the particular case of InSb related nanostructures. On one hand, heterostructured architectures may show interfacial dislocations if reaching the coherency limit, which is dependent on geometrical constrictions of the systems in addition to the mismatch between phases. In this context, it is usually assumed that the mismatch strain in axial heterostructured nanowires is mainly relaxed by elastic distortion of the lattice, although theoretical calculations predict the formation of misfit dislocations. It is remarkably important unveiling whether the partial/total lattice relaxation takes place through elastic and/or plastic mechanisms since both will affect the material performance. Interestingly, the location and shape of the heterointerfaces, as well as possible diffusion phenomena involved, may hinder the understanding of the actual relaxation mechanism, as we show in the case of axial InAs/InSb nanowires. Contrary to most reported works, we find out the presence of misfit dislocations at the core of the system while there is a huge plane bending through the edges of the nanowires. On the other hand, we correlate the systematic observation of a lateral twin boundary with the morphological transition from nanowires to membrane-like systems, called nanosails. Based on the experimental data gathered, consisting on SEM and aberration-corrected STEM measurements, including polarity determination, we are able to establish the underlying defect-driving growth mechanism leading to the formation of membrane-like structures growing aside InAs/InSb nanowires, showing excellent transport properties. Possible instabilities during the growth may promote the sinking of the catalytic droplet to wet one sidewall, leading to the nucleation of the lateral twin that opens the way for the broadening of the system., We acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO MAT2014-51480- ERC (e-ATOM) and Spanish MINECO Severo Ochoa Excellence Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structural and chemical characterization and 3D modelling of metal oxide core-shell nanoparticles with complex morphology

  • Martí-Sànchez, Sara
  • Genç, Aziz
  • Luo, ZhiShan
  • Ibáñez, María
  • Mata, Maria de la
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al 16th European Microscopy Congress, celebrado en Lyon (Francia) del 28 de agosto al 2 de septiembre de 2016., A wide variety of metal oxide manganite and ferrite core-shell nanoparticles (NPs) with adjustable composition were characterized by means of Transmission Electron Microscopy related tools in order to precisely understand their composition, the arrangement of the different chemical species and cation valence state variation along the nanoparticles. The nanoparticles were produced at low temperature and ambient atmosphere using a one-pot two-step synthesis protocol involving the cation exchange of Mn or Fe by Co or Ni in preformed Mn3O4 or Fe3O4 NPs, allowing the formation of a core shell structure. These nanoparticle systems present a complex 3D structure, which has been modelled with Rhodius software and simulated with the STEM-CELL packages, giving rise to a fine determination of the studied systems. Special attention has been paid on manganite – cobalt systems. By selecting the proper cobalt precursor, CoO crystallites could be simultaneously nucleated on the NP surface to form Mn3O4@CoMn2O4–CoO (Figure 1). In this latest case, heterostructured NPs exhibited improved performance and durability as bifunctional catalysts for the oxygen reduction and evolution reactions (ORR, OER) over commercial Pt and IrO2-based catalysts and over previously reported spinel electrocatalysts in alkaline solution., SM acknowledges funding from >Programa Internacional de Becas >la Caixa>-Severo Ochoa”, from Generalitat de Catalunya 2014 SGR 1638, the Spanish MINECO MAT2014-51480-ERC (e-ATOM), Severo Ochoa Excellence Program and coordinated projects between IREC and ICN2, TNT-FUELS and e-TNT (MAT2014-59961-C2-2-R). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic scale strain relaxation in axial semiconductor III-V nanowire heterostructures

  • Mata, María de la
  • Magén, César
  • Caroff, Philippe
  • Arbiol, Jordi
Combination of mismatched materials in semiconductor nanowire heterostructures offers a freedom of bandstructure engineering that is impossible in standard planar epitaxy. Nevertheless, the presence of strain and structural defects directly control the optoelectronic properties of these nanomaterials. Understanding with atomic accuracy how mismatched heterostructures release or accommodate strain, therefore, is highly desirable. By using atomic resolution high angle annular dark field scanning transmission electron microscopy combined with geometrical phase analyses and computer simulations, we are able to establish the relaxation mechanisms (including both elastic and plastic deformations) to release the mismatch strain in axial nanowire heterostructures. Formation of misfit dislocations, diffusion of atomic species, polarity transfer, and induced structural transformations are studied with atomic resolution at the intermediate ternary interfaces. Two nanowire heterostructure systems with promising applications (InAs/InSb and GaAs/GaSb) have been selected as key examples., J.A. acknowledges the funding from the Spanish MINECO MAT2014-51480-ERC (e-ATOM), EU ERANet-RUS Project PRI-PIMERU 2011-1422, and Generalitat de Catalunya 2009SGR770 and 2014SGR1638. M.d.l.M. thanks CSIC Jae-Predoc program. P.C. would like to thank Xavier Wallart for scientific discussions, the French National Research Agency (ANR), TERADOT Project (ANR-11-JS04-002-01) and the Australian Research Council (ARC), Future Fellowship project (FT120100498), for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards defect-free 1-D GaAs/AlGaAs heterostructures based on GaAs nanomembranes

  • Tutuncuoglu, Gozde
  • Mata, María de la
  • Deiana, D
  • Potts, Heidi
  • Matteini, Federico
  • Arbiol, Jordi
  • Fontcuberta Morral, Anna
We demonstrate the growth of defect-free zinc-blende GaAs nanomembranes by molecular beam epitaxy. Our growth studies indicate a strong impact of As4 re-emission and shadowing in the growth rate of the structures. The highest aspect ratio structures are obtained for pitches around 0.7-1 μm and a gallium rate of 1 Å s(-1). The functionality of the membranes is further illustrated by the growth of quantum heterostructures (such as quantum wells) and the characterization of their optical properties at the nanoscale. This proves the potential of nanoscale membranes for optoelectronic applications., GT, HP, FM and AFiM acknowledge SNF funding through the NCCR QSIT, its director's reserve and project nr 143908 and 134506 (DACH program), as well as CIME and CMI for access to the electron microscopes. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3). JA and MdlM acknowledge the funding from the Spanish MINECO MAT2014-51480-ERC (e-ATOM), MAT2014-59961-C2-2-R and Severo Ochoa Excellence Program and Generalitat de Catalunya 2014SGR1638. MdlM thanks the CSIC Jae-Predoc program. The STEM and FIB sample preparation works have been conducted partially in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon – Universidad de Zaragoza”. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. Authors also acknowledge ICN2 for the use of their microscopy facilities. Lastly, we would like to acknowledge Fauzia Jabeen for her valuable help with our MBE system., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-performance thermoelectric nanocomposites from nanocrystal building blocks

  • Ibáñez, Maria|||0000-0001-5013-2843
  • Luo, Zhishan|||0000-0002-0801-9238
  • Genç, Aziz|||0000-0002-2888-2549
  • Piveteau, Laura
  • Ortega, Silvia|||0000-0002-3812-5146
  • Cadavid, Doris|||0000-0002-1376-6078
  • Dobrozhan, Oleksandr|||0000-0001-9238-7596
  • Liu, Yu|||0000-0001-7313-6740
  • Nachtegaal, Maarten
  • Zebarjadi, Mona
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hollow metal nanostructures for enhanced plasmonics, synthesis, local plasmonic properties and applications

  • Genç, Aziz|||0000-0002-2888-2549
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Sancho i Parramon, Jordi
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Puntes, Víctor|||0000-0001-8996-9499
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Metallic nanostructures have received great attention due to their ability to generate surface plasmon resonances, which are collective oscillations of conduction electrons of a material excited by an electromagnetic wave. Plasmonic metal nanostructures are able to localize and manipulate the light at the nanoscale and, therefore, are attractive building blocks for various emerging applications. In particular, hollow nanostructures are promising plasmonic materials as cavities are known to have better plasmonic properties than their solid counterparts thanks to the plasmon hybridization mechanism. The hybridization of the plasmons results in the enhancement of the plasmon fields along with more homogeneous distribution as well as the reduction of localized surface plasmon resonance (LSPR) quenching due to absorption. In this review, we summarize the efforts on the synthesis of hollow metal nanostructures with an emphasis on the galvanic replacement reaction. In the second part of this review, we discuss the advancements on the characterization of plasmonic properties of hollow nanostructures, covering the single nanoparticle experiments, nanoscale characterization via electron energy-loss spectroscopy and modeling and simulation studies. Examples of the applications, i.e. sensing, surface enhanced Raman spectroscopy, photothermal ablation therapy of cancer, drug delivery or catalysis among others, where hollow nanostructures perform better than their solid counterparts, are also evaluated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the Plasmonic Response up, Hollow Cuboid Metal Nanostructures

  • Genç, Aziz|||0000-0002-2888-2549
  • Patarroyo, Javier|||0000-0002-3703-666X
  • Sancho i Parramon, Jordi
  • Arenal, Raúl|||0000-0002-2071-9093
  • Duchamp, Martial
  • González, Edgar E.|||0000-0003-3103-3959
  • Henrard, Luc
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Puntes, Víctor|||0000-0001-8996-9499
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
We report the fine-tuning of the localized surface plasmon resonances (LSPRs) from ultraviolet to near-infrared by nanoengineering the metal nanoparticle morphologies from solid Ag nanocubes to hollow AuAg nanoboxes and AuAg nanoframes. Spatially resolved mapping of plasmon resonances by electron energy loss spectroscopy (EELS) revealed a homogeneous distribution of highly intense plasmon resonances around the hollow nanostructures and the interaction, that is, hybridization, of inner and outer plasmon fields for the nanoframe. Experimental findings are accurately correlated with the boundary element method (BEM) simulations demonstrating that the homogeneous distribution of the plasmon resonances is the key factor for their improved plasmonic properties. As a proof of concept for these enhanced plasmonic properties, we show the effective label free sensing of bovine serum albumin (BSA) of single-walled AuAg nanoboxes in comparison with solid Au nanoparticles, demonstrating their excellent performance for future biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Twin-induced InSb nanosails, a convenient high mobility quantum system

  • De La Mata, Maria|||0000-0002-1581-4838
  • Leturcq, Renaud
  • Plissard, Sébastien R.
  • Rolland, Chloé
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Caroff, Philippe
Ultra narrow bandgap III-V semiconductor nanomaterials provide a unique platform for realizing advanced nanoelectronics, thermoelectrics, infrared photodetection, and quantum transport physics. In this work we employ molecular beam epitaxy to synthesize novel nanosheet-like InSb nanostructures exhibiting superior electronic performance. Through careful morphological and crystallographic characterization we show how this unique geometry is the result of a single twinning event in an otherwise pure zinc blende structure. Four-terminal electrical measurements performed in both the Hall and van der Pauw configurations reveal a room temperature electron mobility greater than 12 000 cm²·V⁻¹·s⁻¹. Quantized conductance in a quantum point contact processed with a split-gate configuration is also demonstrated. We thus introduce InSb "nanosails" as a versatile and convenient platform for realizing new device and physics experiments with a strong interplay between electronic and spin degrees of freedom.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

UV Photosensing Characteristics of Nanowire-Based GaN/AlN Superlattices

  • Lähnemann, Jonas
  • Den Hertog, Martien
  • Hille, Pascal
  • De La Mata, Maria|||0000-0002-1581-4838
  • Fournier, Thierry
  • Schörmann, Jörg
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
  • Monroy, Eva
We have characterized the photodetection capabilities of single GaN nanowires incorporating 20 periods of AlN/GaN:Ge axial heterostructures enveloped in an AlN shell. Transmission electron microscopy confirms the absence of an additional GaN shell around the heterostructures. In the absence of a surface conduction channel, the incorporation of the heterostructure leads to a decrease of the dark current and an increase of the photosensitivity. A significant dispersion in the magnitude of dark currents for different single nanowires is attributed to the coalescence of nanowires with displaced nanodisks, reducing the effective length of the heterostructure. A larger number of active nanodisks and AlN barriers in the current path results in lower dark current and higher photosensitivity and improves the sensitivity of the nanowire to variations in the illumination intensity (improved linearity). Additionally, we observe a persistence of the photocurrent, which is attributed to a change of the resistance of the overall structure, particularly the GaN stem and cap sections. As a consequence, the time response is rather independent of the dark current.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polymer-enhanced stability of inorganic perovskite nanocrystals and their application in color conversion LEDs

  • Meyns, Michaela|||0000-0003-2476-9001
  • Perálvarez, Mariano
  • Heuer-Jungemann, Amelie
  • Hertog, Wim
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Nafria, Raquel|||0000-0002-3254-1616
  • Genç, Aziz|||0000-0002-2888-2549
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Carreras, Josep
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kanaras, Antonios G.
Cesium lead halide (CsPbX₃, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX₃ NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phonon engineering in isotopically disordered silicon nanowires

  • Mukherjee, Samik|||0000-0002-5279-1110
  • Givan, Uri
  • Senz, Stephan
  • Bergeron, A.
  • Francoeur, Sebastien|||0000-0002-6129-7026
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Sekiguchi, T.
  • Itoh, K. M.
  • Isheim, D.
  • Seidman, D. N.
  • Moutanabbir, Oussama|||0000-0002-0721-3696
The introduction of stable isotopes in the fabrication of semiconductor nanowires provides an additional degree of freedom to manipulate their basic properties, design an entirely new class of devices, and highlight subtle but important nanoscale and quantum phenomena. With this perspective, we report on phonon engineering in metal-catalyzed silicon nanowires with tailor-made isotopic compositions grown using isotopically enriched silane precursors ²⁸SiH, ²⁹SiH, and ³⁰SiH with purity better than 99.9%. More specifically, isotopically mixed nanowires ²⁸Si ³⁰Si with a composition close to the highest mass disorder (x ∼ 0.5) were investigated. The effect of mass disorder on the phonon behavior was elucidated and compared to that in isotopically pure Si nanowires having a similar reduced mass. We found that the disorder-induced enhancement in phonon scattering in isotopically mixed nanowires is unexpectedly much more significant than in bulk crystals of close isotopic compositions. This effect is explained by a nonuniform distribution of ²⁸Si and ³⁰Si isotopes in the grown isotopically mixed nanowires with local compositions ranging from x = ∼0.25 to 0.70. Moreover, we also observed that upon heating, phonons in ²⁸Si ³⁰Si nanowires behave remarkably differently from those in ²⁹Si nanowires suggesting a reduced thermal conductivity induced by mass disorder. Using Raman nanothermometry, we found that the thermal conductivity of isotopically mixed ²⁸Si Si nanowires is ∼30% lower than that of isotopically pure ²⁹Si nanowires in agreement with theoretical predictions. (Figure Presented).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Long-lived excitons in GaN/AlN nanowire heterostructures

  • Beeler, Mark
  • Lim, Caroline B.
  • Hille, Pascal
  • Bleuse, Joel
  • Schörmann, Jörg
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
  • Monroy, Eva
GaN/AlN nanowire heterostructures can display photoluminescence (PL) decay times on the order of microseconds that persist up to room temperature. Doping the GaN nanodisk insertions with Ge can reduce these PL decay times by two orders of magnitude. These phenomena are explained by the three-dimensional electric field distribution within the GaN nanodisks, which has an axial component in the range of a few MV/cm associated to the spontaneous and piezoelectric polarization, and a radial piezoelectric contribution associated to the shear components of the lattice strain. At low dopant concentrations, a large electron-hole separation in both the axial and radial directions is present. The relatively weak radial electric fields, which are about one order of magnitude smaller than the axial fields, are rapidly screened by doping. This bidirectional screening leads to a radial and axial centralization of the hole underneath the electron, and consequently, to large decreases in PL decay times, in addition to luminescence blue shifts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Position-controlled growth of GaN nanowires and nanotubes on diamond by molecular beam epitaxy

  • Schuster, Fabian
  • Hetzl, Martin
  • Weiszer, Saskia
  • Garrido, Jose|||0000-0001-5621-1067
  • De La Mata, Maria|||0000-0002-1581-4838
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Stutzmann, Martin|||0000-0002-0068-3505
In this work the position-controlled growth of GaN nanowires (NWs) on diamond by means of molecular beam epitaxy is investigated. In terms of growth, diamond can be seen as a model substrate, providing information of systematic relevance also for other substrates. Thin Ti masks are structured by electron beam lithography which allows the fabrication of perfectly homogeneous GaN NW arrays with different diameters and distances. While the wurtzite NWs are found to be Ga-polar, N-polar nucleation leads to the formation of tripod structures with a zinc-blende core which can be efficiently suppressed above a substrate temperature of 870 °C. A variation of the III/V flux ratio reveals that both axial and radial growth rates are N-limited despite the globally N-rich growth conditions, which is explained by the different diffusion behavior of Ga and N atoms. Furthermore, it is shown that the hole arrangement has no effect on the selectivity but can be used to force a transition from nanowire to nanotube growth by employing a highly competitive growth regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High yield of gaas nanowire arrays on si mediated by the pinning and contact angle of Ga, Amorphous silicon mediates a high yield in GaAs nanowire arrays on Si

  • Russo-Averchi, Eleonora
  • Vukajlovic Plestina, Jelena
  • Tütüncüoglu, Gözde
  • Matteini, Federico
  • Dalmau-Mallorquí, Anna
  • De La Mata, Maria|||0000-0002-1581-4838
  • Rüffer, Daniel
  • Potts, Heidi A.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Conesa-Boj, Sonia
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
GaAs nanowire arrays on silicon offer great perspectives in the optoelectronics and solar cell industry. To fulfill this potential, gold-free growth in predetermined positions should be achieved. Ga-assisted growth of GaAs nanowires in the form of array has been shown to be challenging and difficult to reproduce. In this work, we provide some of the key elements for obtaining a high yield of GaAs nanowires on patterned Si in a reproducible way: contact angle and pinning of the Ga droplet inside the apertures achieved by the modification of the surface properties of the nanoscale areas exposed to growth. As an example, an amorphous silicon layer between the crystalline substrate and the oxide mask results in a contact angle around 90°, leading to a high yield of vertical nanowires. Another example for tuning the contact angle is anticipated, native oxide with controlled thickness. This work opens new perspectives for the rational and reproducible growth of GaAs nanowire arrays on silicon.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface hydrogen enables subeutectic vapor-liquid-solid semiconductor nanowire growth

  • Sivaram, Saujen V.
  • Hui, Ho Yee
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Filler, Michael A.
Vapor-liquid-solid nanowire growth below the bulk metal-semiconductor eutectic temperature is known for several systems; however, the fundamental processes that govern this behavior are poorly understood. Here, we show that hydrogen atoms adsorbed on the Ge nanowire sidewall enable AuGe catalyst supercooling and control Au transport. Our approach combines in situ infrared spectroscopy to directly and quantitatively determine hydrogen atom coverage with a "regrowth" step that allows catalyst phase to be determined with ex situ electron microscopy. Maintenance of a supercooled catalyst with only hydrogen radical delivery confirms the centrality of sidewall chemistry. This work underscores the importance of the nanowire sidewall and its chemistry on catalyst state, identifies new methods to regulate catalyst composition, and provides synthetic strategies for subeutectic growth in other nanowire systems.