Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin-like metallic NiCo2Se4 for high-performance lithium–sulfur batteries

  • Zhang, Ting
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Yang, Xuhui
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., To realize fast-growing field of electric vehicles, rechargeable lithium-sulfur batteries (LSBs) have recently emerged as one of the most exciting alternatives to lithium-ion batteries (LIBs) owing to their higher theoretical energy density, 6 times higher than LIBs and lower cost. However, a poor utilization of the active material involved by the electrical insulating character of sulfur and lithium sulfides and a rapid degradation during charge/discharge processes still limit their practical application. Therefore, in this work, an urchin-shaped NiCo2Se4 (u-NCSe) nanostructures as efficient sulfur hosts were synthesized to overcome the limitations of lithium-sulfur batteries (LSBs) using selenization of Ni0.33Co0.67(CO3)0.5OH precursor. The u-NCSe showed a hollow structure with different distribution of Ni, Co and Se, which was proved by electron energy loss spectroscopy (EELS). Meanwhile, the high-resolution transmission electron microscopy (HRTEM) images indicated that the NiCo2Se4 nanostructures had a good crystallinity, in agreement with the cubic phase of NiCo2Se4 (space group: C12/m1). Owing to the hollow structure that can relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh/g at 0.1 C and retains 626 mAh/g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg/cm2), a reversible capacity of 557 mAh/g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measure-ments prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union’s Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016-77798-C4-3-R and ENE2017-85087-C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF-FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The effects of lithium sulfur battery ageing on second-life possibilities and environmental life cycle assessment studies

  • Wolff, Deidre
  • Canals Casals, Lluc|||0000-0002-4791-9917
  • Benveniste Pérez, Gabriela|||0000-0002-3905-3367
  • Corchero García, Cristina|||0000-0002-8465-0830
  • Trilla Romero, Lluís|||0000-0002-7586-3834
The development of Li-ion batteries has enabled the re-entry of electric vehicles into the market. As car manufacturers strive to reach higher practical specific energies (550 Wh/kg) than what is achievable for Li-ion batteries, new alternatives for battery chemistry are being considered. Li-Sulfur batteries are of interest due to their ability to achieve the desired practical specific energy. The research presented in this paper focuses on the development of the Li-Sulfur technology for use in electric vehicles. The paper presents the methodology and results for endurance tests conducted on in-house manufactured Li-S cells under various accelerated ageing conditions. The Li-S cells were found to reach 80% state of health after 300–500 cycles. The results of these tests were used as the basis for discussing the second life options for Li-S batteries, as well as environmental Life Cycle Assessment results of a 50 kWh Li-S battery, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dual extended Kalman filter for state of charge estimation of lithium–sulfur batteries

  • Trilla Romero, Lluís|||0000-0002-7586-3834
  • Canals Casals, Lluc|||0000-0002-4791-9917
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Paradell, Pol
Lithium-Sulfur is a promising technology for the next generation of batteries and research efforts for early-stage prototype implementation increased in recent years. For the development of a suitable Battery Management System, a state estimator is required; however, lithium-sulfur behavior presents a large non-observable region that may difficult the convergence of the state estimation algorithm leading to large errors or even instability. A dual Extended Kalman Filter is proposed to circumvent the non-observability region. This objective is achieved by combining a parameter estimation algorithm with a cell model that includes non-linear behavior such as self-discharge and cell degradation. The resulting dual Kalman filter is applied to lithium–sulfur batteries to estimate their State-of-Charge incorporating the effects of degradation, temperature, and self-discharge deviations., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dual extended Kalman filter for state of charge estimation of lithium–sulfur batteries

  • Trilla Romero, Lluís
  • Canals Casals, Lluc
  • Jacas Biendicho, Jordi
  • Paradell, Pol
Lithium-Sulfur is a promising technology for the next generation of batteries and research efforts for early-stage prototype implementation increased in recent years. For the development of a suitable Battery Management System, a state estimator is required; however, lithium-sulfur behavior presents a large non-observable region that may difficult the convergence of the state estimation algorithm leading to large errors or even instability. A dual Extended Kalman Filter is proposed to circumvent the non-observability region. This objective is achieved by combining a parameter estimation algorithm with a cell model that includes non-linear behavior such as self-discharge and cell degradation. The resulting dual Kalman filter is applied to lithium–sulfur batteries to estimate their State-of-Charge incorporating the effects of degradation, temperature, and self-discharge deviations., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The effects of lithium sulfur battery ageing on second-life possibilities and environmental life cycle assessment studies

  • Wolff, Deidre
  • Canals Casals, Lluc
  • Benveniste Pérez, Gabriela
  • Corchero García, Cristina
  • Trilla Romero, Lluís
The development of Li-ion batteries has enabled the re-entry of electric vehicles into the market. As car manufacturers strive to reach higher practical specific energies (550 Wh/kg) than what is achievable for Li-ion batteries, new alternatives for battery chemistry are being considered. Li-Sulfur batteries are of interest due to their ability to achieve the desired practical specific energy. The research presented in this paper focuses on the development of the Li-Sulfur technology for use in electric vehicles. The paper presents the methodology and results for endurance tests conducted on in-house manufactured Li-S cells under various accelerated ageing conditions. The Li-S cells were found to reach 80% state of health after 300–500 cycles. The results of these tests were used as the basis for discussing the second life options for Li-S batteries, as well as environmental Life Cycle Assessment results of a 50 kWh Li-S battery, Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Ting|||0000-0002-0317-9662
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yang, Xuhui
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Urchin-shaped NiCoSe (u-NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium-sulfur batteries (LSBs). u-NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh g at 0.1 C and retains 626 mAh g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm), a reversible capacity of 557 mAh g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance.