Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Rapid, Low-Cost, and Scalable Technique for Printing State-of-the-Art Organic Field-Effect Transistors

  • Temiño, Inés
  • Pozo, Freddy G. del
  • Ajayakumar, Murugan
  • Galindo, Sergi
  • Puigdollers-González, Joaquim
  • Mas Torrent, Marta
In the last few years exciting advances have been achieved in developing printing techniques for organic semiconductors, and impressive mobility values have been reported for the resulting organic field-effect transistors (OFETs). However, not all these techniques are scalable and some of them require additional crystallization steps. This study reports on the fabrication of OFETs employing blends of four benchmark organic semiconductors with polystyrene and demonstrates that applying the same formulation and experimental conditions for printing them, highly reproducible and uniform crystalline films exhibiting high OFET performance are successfully achieved. It is noted that the mobility values achieved here are not the highest reported for the studied materials; however, they are state-of-the-art values and could be regarded as exceptional considering the low cost and fast speed of the fabrication process involved here., This work was mainly funded by the ERC StG 2012 306826 e GAMES and ERC PoC 2014 640120 LAB TECH projects. The authors also thank the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER BBN), the DGI (Spain) project BE WELL CTQ2013 40480 R, the Generalitat de Catalunya (2014 SGR 17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV 2015 0496). The authors would like to thank the ICTS "NANBIOSIS", more specifically to the Nanotechnology Platform, unit of CIBER BBN at the Institute for Bioengineering of Catalonia (IBEC) for their assistance in ToF SIMS analyses. I. T. acknowledges FPU fellowship from the Ministery and the Materials Science PhD Program of Universitat Autònoma de Barcelona. F. G. D. P. thanks Universidad Técnica de Ambato and Secretaría de Educación Superior, Ciencia, Tecnología e Innovación for funding through a doctoral scholarship “Convocatoria abierta 2010”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of polymorphism and morphology in solution sheared organic field-effect transistors

  • Galindo, Sergi
  • Tamayo, Adrián
  • Leonardi, Francesca
  • Mas Torrent, Marta
During the last decades, small molecule organic semiconductors have been successfully used as active layer in organic field-effect transistors (OFETs). Despite the high mobility achieved so far with organic molecules, in order to progress in the field it is crucial to find techniques to process them from solution. The device reproducibility is one of the principal weak points of organic electronics for further commercialization. To achieve a high device-to-device reproducibility it is essential to control the morphology and polymorphism of the active layer for OFET application. In this work, the preparation of thin films is reported based on blends of the organic semiconductor dibenzo-tetrathiafulvalene (DB-TTF) and polystyrene by a solution shearing technique compatible with upscaling. Here, it is demonstrated that varying the deposition parameters (i.e., speed and temperature) or the solution formulation (i.e., semiconductor/binder polymer ratio) is possible to control the film morphology and semiconductor polymorphism and, hence, the different intermolecular interactions. It is demonstrated that the control of the thermodynamics and kinetics of the crystallization process is key for the device performance optimization. Further, this is the first time that DB-TTF thin films of the α-polymorph are reported., This work was mainly funded by the European Research Council (ERC) StG 2012-306826 e-GAMES and ERC PoC 2014-640120 LAB-TECH projects. The authors also thank the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the projects BE-WELL CTQ 2013-40480-R and FANCY CTQ2016-80030-R, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). F.L. gratefully acknowledges the “Juan de la Cierva” programme., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A rapid, low-cost, and scalable technique for printing state-of-the-art organic field-effcet transistors

  • Temiño, Inés
  • Del Pozo León, Freddy
  • Ajayakumar, M.R.
  • Galindo Lorente, Sergi
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Mas Torrent, Marta
In the last few years exciting advances have been achieved in developing printing techniques for organic semiconductors, and impressive mobility values have been reported for the resulting organic field-effect transistors (OFETs). However, not all these techniques are scalable and some of them require additional crystallization steps. This study reports on the fabrication of OFETs employing blends of four benchmark organic semiconductors with polystyrene and demonstrates that applying the same formulation and experimental conditions for printing them, highly reproducible and uniform crystalline films exhibiting high OFET performance are successfully achieved. It is noted that the mobility values achieved here are not the highest reported for the studied materials; however, they are state-of-the-art values and could be regarded as exceptional considering the low cost and fast speed of the fabrication process involved here., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A rapid, low-cost, and scalable technique for printing state-of-the-art organic field-effcet transistors

  • Temiño, Inés
  • Del Pozo León, Freddy
  • Ajayakumar, M.R.
  • Galindo Lorente, Sergi
  • Puigdollers i González, Joaquim
  • Mas Torrent, Marta
In the last few years exciting advances have been achieved in developing printing techniques for organic semiconductors, and impressive mobility values have been reported for the resulting organic field-effect transistors (OFETs). However, not all these techniques are scalable and some of them require additional crystallization steps. This study reports on the fabrication of OFETs employing blends of four benchmark organic semiconductors with polystyrene and demonstrates that applying the same formulation and experimental conditions for printing them, highly reproducible and uniform crystalline films exhibiting high OFET performance are successfully achieved. It is noted that the mobility values achieved here are not the highest reported for the studied materials; however, they are state-of-the-art values and could be regarded as exceptional considering the low cost and fast speed of the fabrication process involved here., Peer Reviewed, Postprint (published version)