Pasar al contenido principal

INGENIERIA ESTRUCTURAL DE GRAFENO Y MATERIALES BIDIMENSIONALES NOVEDOSOS PARA APLICACIONES EN ALMACENAMIENTO DE ENERGIA, CATALITICAS Y MEDIOAMBIENTALES

RTI2018-100832-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles

  • Cueto Díaz, Eduardo J.
  • Suárez García, Fabián
  • Gálvez Martínez, Santos
  • Valles González, M. P.
  • Mateo Marti, Eva
Efforts on CO2 capture have intensified as climate change compromises ecosystems and biodiversity. Therefore, it is crucial to develop different methods for CO2 sequestration to improve solid sorbent capabilities (NPs). To this end, the surface of 200-nm silica nanoparticles (SiO2NPs) was covalently anchored with aminated ligands, 3-aminopropyltriethoxysilane (APTES), poly(amidoamine) dendrimers (PAMAM) and a short peptide comprising two lysine units, aiming for CO2 adsorption over a wide range of pressures. Our goal was to explore the influence of functional chemical groups (attached to the SiO2NPs) on CO2 sequestration. The observed results showed that at low and high CO2 gas pressure conditions, typical APTES functionalized SiO2Np surpassed the CO2 adsorption capacities of dendritic and peptide-based nanoparticles bearing amine-polymer functionalities, a remarkable effect that was investigated in this work. In addition, a convenient and facile method to decorate and quantify SiO2 nanoparticles with PAMAM and a short peptide is reported., This work has been supported by MINECO grants PID2019-104205GB-C21 and PID2019-107442RB-C32) and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by PCTI 2013-2017 from the Principado de Asturias and ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616. The authors also thank Maite Sampedro for her help during IR measurements., Peerreview
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

HKUST-1 metal-organic framework nanoparticle/graphene oxide nanocomposite aerogels for CO2and CH4Adsorption and separation

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Fraile, Julio|||0000-0003-2961-7920
  • Navarro, Jorge A. R.|||0000-0002-8359-0397
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Giner Planas, José|||0000-0002-1648-2169
  • Domingo, Concepción|||0000-0001-7857-2760
  • Yazdi, Amirali|||0000-0001-9420-8504
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidized graphitic carbon nitride nanosheets as an effective adsorbent for organic dyes and tetracycline for water remediation

  • Yousefi, Mahdieh
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Moshfegh, Alireza Z.
Graphitic carbon nitride (g-C3N4) is promising as adsorbent for water remediation as its chemical structure allows a variety of mechanisms to interact with wastewater pollutants. However, several issues, such as low specific surface area and insufficient dispersibility in water, have to be tackled to achieve a competitive performance in such use. Previous attempts to improve the features of g-C3N4as an adsorbent have relied on carbon doping and exfoliation in the solid phase by thermal expansion. Here, we demonstrate that exfoliation in the liquid phase by a combination of oxidation and sonication allows preparing g–C3N4–based materials with improved dispersibility in water, increased exposed surface, and abundance of surface functional groups. The obtained oxidized g-C3N4 adsorbents exhibited high adsorption capacities which were remarkable towards organic dyes (∼70–600 mg/g) and excellent in the case of the antibiotic tetracycline (895 mg/g) in aqueous solution. The present results should open new opportunities for the use of oxidized g-C3N4 materials as adsorbents for water remediation., S. V.-R. and J. I. P gratefully acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, as well as the Spanish Ministerio de Ciencia, Innovación y Universidades and the ERDF through project RTI2018-100832-B-I00. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013–2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is also acknowledged. A. Z. M. thanks Sharif University of Technology and the Iran National Science Foundation (Grant No. 940009) for partial support. M. Y. acknowledges the Iran Elite Foundation for supporting sabbatical leave., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Cathodic Exfoliation Strategy toward Solution-Processable and Phase-Preserved MoS2 Nanosheets for Energy Storage and Catalytic Applications

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials and Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsami.9b13484, The production of MoS2 nanosheets by electrochemical exfoliation routes holds great promise as a means to access this two-dimensional material in large quantities for different practical applications. However, the use of electrolytes based on synthetic organic salts and solvents, as well as issues related to the unwanted oxidation and/or phase transformation of the exfoliated nanosheets, constitute significant obstacles that hinder the industrial adoption of the electrochemical approach. Here, we introduce a safe and sustainable method for the cathodic delamination of MoS2 that makes use of aqueous solutions of very simple and widely available salts, mainly KCl, as the electrolyte. Combined with an appropriate biomolecule-based solvent transfer protocol, such an electrolytic exfoliation route is shown to afford colloidally dispersed, oxide-free, and phase-preserved MoS2 nanosheets of high structural quality in considerable yields. The mechanisms behind the efficient aqueous delamination of the bulk MoS2 cathode are also discussed and rationalized on the basis of the penetration of hydrated cations from the electrolyte between its layers and the immediate reduction of the accompanying water molecules. An asymmetric supercapacitor assembled with a cathodic MoS2 nanosheet–single walled carbon nanotube hybrid as the positive electrode and activated carbon as the negative electrode delivered energy densities (e.g., 26 W h kg–1 at 750 W kg–1 in 6 M KOH) that were competitive with those of other MoS2-based asymmetric devices. When used as a catalyst for the reduction of nitroarenes, the present cathodically exfoliated nanosheets exhibited one of the highest activities reported so far with MoS2 nanostructures, the origin of which is accounted for as well. Overall, by facilitating access to this two-dimensional material through a particularly simple, efficient, and cost-effective technique, these results should expedite the practical implementation of MoS2 nanosheets in energy storage, catalysis, and beyond., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, the Spanish Ministerio de Ciencia, Innovación y Universidades and the ERDF through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G-D. and J.M.M. are grateful to Spanish MINECO and Ministerio de Educación, Cultura y Deporte (MECD), respectively, for their respective pre-doctoral contracts (BES/2016 077830 and FPU14/00792). The University of Oviedo acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage inflammatory and metabolic responses to graphene-based nanomaterials differing in size and functionalization

  • Cicuéndez, Mónica
  • Fernandes, Márcia
  • Ayán-Varela, Miguel
  • Oliveira, Helena
  • Feito, María José
  • Díez-Orejas, Rosalía
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Vila, Mercedes
  • Portolés, María Teresa
  • Duarte, Iola F.
The preparation of graphene-based nanomaterials (GBNs) with appropriate stability and biocompatibility is crucial for their use in biomedical applications. In this work, three GBNs differing in size and/or functionalization have been synthetized and characterized, and their in vitro biological effects were compared. Pegylated graphene oxide (GO-PEG, 200–500 nm) and flavin mononucleotide-stabilized pristine graphene with two different sizes (PG-FMN, 200–400 nm and 100–200 nm) were administered to macrophages, chosen as cellular model due to their key role in the processing of foreign materials and the regulation of inflammatory responses. The results showed that cellular uptake of GBNs was mainly influenced by their lateral size, while the inflammatory potential depended also on the type of functionalization. PG-FMN nanomaterials (both sizes) triggered significantly higher nitric oxide (NO) release, together with some intracellular metabolic changes, similar to those induced by the prototypical inflammatory stimulus LPS. NMR metabolomics revealed that macrophages incubated with smaller PG-FMN displayed increased levels of succinate, itaconate, phosphocholine and phosphocreatine, together with decreased creatine content. The latter two variations were also detected in cells incubated with larger PG-FMN nanosheets. On the other hand, GO-PEG induced a decrease in the inflammatory metabolite succinate and a few other changes distinct from those seen in LPS-stimulated macrophages. Assessment of TNF-α secretion and macrophage surface markers (CD80 and CD206) further corroborated the low inflammatory potential of GO-PEG. Overall, these findings revealed distinct phenotypic and metabolic responses of macrophages to different GBNs, which inform on their immunomodulatory activity and may contribute to guide their therapeutic applications., This work was developed in the scope of the projects CICECO-Aveiro Institute of Materials, FCT Ref. UID/CTM/50011/2019, and CESAM, FCT Ref. UID/AMB/50017/2019, financed by national funds through FCT/MCTES, Portugal. The NMR spectrometers are part of the National NMR Network (PTNMR) and are partially supported by Infrastructure Project Nº 022161 (co-financed by FEDER through COMPETE 2020, POCI and PORL and FCT through PIDDAC). Further acknowledgments are due to Bruker BioSpinGmbH and the European Union Framework Programme for Research and Innovation HORIZON 2020, under the TEAMING Grant agreement No 739572 - The Discoveries CTR. I.F.D. and H.O. acknowledge FCT/MCTES for research contracts under the Programs ‘Investigador FCT’ and Stimulus to Scientific Employment (CEECIND/04050/2017), respectively, and M.C. acknowledges the FCT-awarded research grant SFRH/BPD/101468/2014. This research was also supported by the Spanish Ministerio de Economía y Competitividad (MAT2016-75611-R AEI/FEDER, UE). M.A.-V., S.V.-R. and J.I.P. acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, and from the Spanish Ministerio de Ciencia, Innovación y Universidades, the Spanish Agencia Estatal de Investigación and ERDF, through project RTI2018-100832-B-I00. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and ERDF (project IDI/2018/000233) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Performance Na-O2 Batteries and Printed Microsupercapacitors Based on Water-Processable, Biomolecule-Assisted Anodic Graphene

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Enterría, Marina
  • Villar Rodil, Silvia
  • Kelly, Adam G.
  • Nalawade, Yashaswi
  • Coleman, Jonathan N.
  • Rojo, Teófilo
  • Ortiz-Vitoriano, Nagore
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Integrated approaches that expedite the production and processing of graphene into useful structures and devices, particularly through simple and environmentally friendly strategies, are highly desirable in the efforts to implement this two-dimensional material in state-of-the-art electrochemical energy storage technologies. Here, we introduce natural nucleotides (e.g., adenosine monophosphate) as bifunctional agents for the electrochemical exfoliation and dispersion of graphene nanosheets in water. Acting both as exfoliating electrolytes and colloidal stabilizers, these biomolecules facilitated access to aqueous graphene bio-inks that could be readily processed into aerogels and inkjet-printed interdigitated patterns. Na-O2 batteries assembled with the graphene-derived aerogels as the cathode and a glyme-based electrolyte exhibited a full discharge capacity of ∼3.8 mAh cm–2 at a current density of 0.2 mA cm–2. Moreover, shallow cycling experiments (0.5 mAh cm–2) boasted a capacity retention of 94% after 50 cycles, which outperformed the cycle life of prior graphene-based cathodes for this type of battery. The positive effect of the nucleotide-adsorbed nanosheets on the battery performance is discussed and related to the presence of the phosphate group in these biomolecules. Microsupercapacitors made from the interdigitated graphene patterns as the electrodes also displayed a competitive performance, affording areal and volumetric energy densities of 0.03 μWh cm–2 and 1.2 mWh cm–3 at power densities of 0.003 mW cm–2 and 0.1 W cm–3, respectively. Taken together, by offering a green and straightforward route to different types of functional graphene-based materials, the present results are expected to ease the development of novel energy storage technologies that exploit the attractions of graphene., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also acknowledged. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792). J.N.C. acknowledges the ERC Adv. Gr. FUTUREPRINT. This work was also financially supported by the European Union (Graphene Flagship, Core 2, Grant number 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activation of two-dimensional MoS2 nanosheets by wet-chemical sulfur vacancy engineering for the catalytic reduction of nitroarenes and organic dyes

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Caridad, Bárbara
  • Villar Rodil, Silvia
  • Díaz-González, María Del Mar
  • Fernández-Sánchez, C.
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Two-dimensional 2H-phase MoS2 nanosheets can be used as a non-noble metal-based catalyst for nitroarene and organic dye reduction, thus being of potential utility towards the treatment of industrial wastewater. However, their activity is severely limited by the inertness of their pristine basal surface. We report here a simple approach for the catalytic activation of solvent-dispersed MoS2 nanosheets based on the introduction of sulfur vacancies by hydrazine treatment. MoS2 nanosheets boasting markedly improved catalytic activities in the reduction of 4-nitrophenol, 4-nitroaniline, methyl orange and methylene blue by NaBH4 could be obtained, outperforming many prior non-noble metal-based catalysts developed for such reactions. Notably, the improvement in catalytic activity was not compromised by the use of a proper dispersant to colloidally stabilize the activated nanosheets in the aqueous reaction medium. Substrate-supported catalysts could be prepared by immobilizing the nanosheets on melamine foam, facilitating their handling and reutilization. The chemical processes taking place between the investigated reagents and the MoS2 catalyst were also discussed and rationalized, based on which a mechanism for nitroarene/dye reduction mediated by the sulfur vacancies was proposed., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and the ERDF through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G.-D. is grateful to the Spanish MINECO for his pre-doctoral contract (BES/2016 077830). A.A. acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic Polyureas—A Novel Subclass of Poly(Ionic Liquid)s for CO2 Capture

  • Morozova, Sofia M.
  • Lozinskaya, Elena I.
  • Sardon, Haritz
  • Suárez García, Fabián
  • Vlasov, Petr S.
  • Vaudemont, Régis
  • Vygodskii, Yakov S.
  • Shaplov, Alexander S.
The growing concern for climate change and global warming has given rise to investigations in various research fields, including one particular area dedicated to the creation of solid sorbents for efficient CO2 capture. In this work, a new family of poly(ionic liquid)s (PILs) comprising cationic polyureas (PURs) with tetrafluoroborate (BF4) anions has been synthesized. Condensation of various diisocyanates with novel ionic diamines and subsequent ion metathesis reaction resulted in high molar mass ionic PURs (Mw = 12 ÷ 173 × 103 g/mol) with high thermal stability (up to 260 °C), glass transition temperatures in the range of 153–286 °C and remarkable CO2 capture (10.5–24.8 mg/g at 0 °C and 1 bar). The CO2 sorption was found to be dependent on the nature of the cation and structure of the diisocyanate. The highest sorption was demonstrated by tetrafluoroborate PUR based on 4,4′-methylene-bis(cyclohexyl isocyanate) diisocyanate and aromatic diamine bearing quinuclidinium cation (24.8 mg/g at 0 °C and 1 bar). It is hoped that the present study will inspire novel design strategies for improving the sorption properties of PILs and the creation of novel effective CO2 sorbents., This research was in part supported by Fonds National de la Recherche Luxembourg (FNR) with Agency Nationale de la Recherche (ANR) through the ANR-FNR project DISAFECAP (Agreement number INTER/ANR/18/13358226). Partial funding by the Spanish Agencia Estatal de Investigación (AEI), PCTI 2013-2017 del Principado de Asturias and ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233 is gratefully acknowledged. Partial funding by Russian Foundation for Basic Research (RFBR) through project 16-03-00768_a is acknowledged. Elemental analysis and IR spectroscopy were performed with the financial support from Ministry of Science and Higher Education of the Russian Federation using the equipment of Center for molecular composition studies of INEOS RAS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting the Performance of Graphene Cathodes in Na–O2 Batteries by Exploiting the Multifunctional Character of Small Biomolecules

  • Enterría, Marina
  • Gómez-Urbano, Juan Luis
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Carriazo, Daniel
  • Paredes Nachón, Juan Ignacio
  • Ortiz-Vitoriano, Nagore
Graphene aerogels derived from a biomolecule‐assisted aqueous electrochemical exfoliation route are explored as cathode materials in sodium–oxygen (Na–O2) batteries. To this end, the natural nucleotide adenosine monophosphate (AMP) is used in the multiple roles of exfoliating electrolyte, aqueous dispersant, and functionalizing agent to access high quality, electrocatalytically active graphene nanosheets in colloidal suspension (bioinks). The surface phenomena occurring on the electrochemically derived graphene cathode is thoroughly studied to understand and optimize its electrochemical performance, where a cooperative effect between the nitrogen atoms and phosphates from the AMP molecules is demonstrated. Moreover, the role of the nitrogen atoms in the adenine nucleobase of AMP and short‐chain phosphate is unraveled. Significantly, the use of such cathodes with a proper amount of AMP molecules adsorbed on the graphene nanosheets delivers a discharge capacity as high as 9.6 mAh cm−2 and performs almost 100 cycles with a considerably reduced cell overpotential and a coulombic efficiency of ≈97% at high current density (0.2 mA cm−2). This study opens a path toward the development of environmentally friendly air cathodes by the use of natural nucleotides which offers a great opportunity to explore and manufacture bioinspired cathodes for metal–oxygen batteries., M.E., J.L.G.‐U., D.C., and N.O.‐V. thank the European Union (Graphene Flagship‐Core 3, Grant number 881603) and the Spanish Ministry of Science and Innovation (MICINN/FEDER) (RTI2018‐096199‐B‐I00) for the financial support of this work. J.M.M., J.I.P., and S.V.‐R. gratefully acknowledge funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI), and the European Regional Development Fund (ERDF) through project RTI2018‐100832‐B‐I00, as well as Plan de Ciencia, Tecnología e Innovación (PCTI) 2013‐2017 del Principado de Asturias and the ERDF (project IDI/2018/000233). J.L.G.‐U. is very thankful to the Spanish Ministry of Education, Science and Universities (MICINN) for the FPU grant (16/03498), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efficient cathodic exfoliation of graphite in aqueous electrolytes towards high quality graphene for energy and environmental applications

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The electrochemical exfoliation of graphite in aqueous medium stands out as an attractive and scalable approach for the production of graphenes for different applications, due to its simplicity, cost-effectiveness and environmental friendliness [1]. In particular, cathodic exfoliation in water should allow access to high quality and non-oxidized graphene flakes, but this possibility has been limited by a poor intercalation ability of aqueous cations [2]. Here, we demonstrate that with a proper choice of starting graphite and electrolyte, high quality graphene flakes can be obtained in substantial yields via cathodic delamination in water., Funding by the Spanish Ministerio de Economia y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovacion y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. S.G-D. and J.M.M. are grateful to MINECO and the Spanish Ministerio de Educacion, Cultura y Deporte (MECD), respectively, for their pre-doctoral contracts (BES/2016 077830 and FPU14/00792, respectively)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Functionalization of 2H-Phase MoS2 Nanosheets via an Electrolytic Route for Enhanced Catalytic Performance

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Martínez-Jodar, Alberto
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The molecular functionalization of two-dimensional MoS2 is of practical relevance with a view to, for example, facilitating its liquid-phase processing or enhancing its performance in target applications. While derivatization of metallic 1T-phase MoS2 nanosheets has been relatively well studied, progress involving their thermodynamically stable, 2H-phase counterpart has been more limited due to the lower chemical reactivity of the latter. Here, we report a simple electrolytic strategy to functionalize 2H-phase MoS2 nanosheets with molecular groups derived from organoiodides. Upon cathodic treatment of a pre-expanded MoS2 crystal in an electrolyte containing the organoiodide, water-dispersible nanosheets derivatized with acetic acid or aniline moieties (∼0.10 molecular groups inserted per surface sulfur atom) were obtained. Analysis of the functionalization process indicated it to be enabled by the external supply of electrons from the cathodic potential, although they could also be sourced from a proper reducing agent, as well as by the presence of intrinsic defects in the 2H-phase MoS2 lattice (e.g., sulfur vacancies), where the molecular groups can bind. The acetic acid-functionalized nanosheets were tested as a non-noble metal-based catalyst for nitroarene and organic dye reduction, which is of practical utility in environmental remediation and chemical synthesis, and exhibited a markedly enhanced activity, surpassing that of other (1T- or 2H-phase) MoS2 materials and most non-noble metal catalysts previously reported for this application. The reduction kinetics (reaction order) was seen to correlate with the net electric charge of the nitroarene/dye molecules, which was ascribed to the distinct abilities of the latter to diffuse to the catalyst surface. The functionalized MoS2 catalyst also worked efficiently at realistic (i.e., high) reactant concentrations, as well as with binary and ternary mixtures of the reactants, and could be immobilized on a polymeric scaffold to expedite its manipulation and reuse., Funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI), and the European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00, as well as Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G.-D. is grateful to the Spanish MINECO for his predoctoral contract (BES/2016 077830)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cytotoxicity of Nucleotide-Stabilized Graphene Dispersions on Osteosarcoma and Healthy Cells: On the Way to Safe Theranostics Agents

  • Cicuéndez, Mónica
  • Coimbra, Andreia
  • Santos, Joana
  • Oliveira, Helena
  • Ayán-Varela, Miguel
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Vila, Mercedes
  • Silva, Virgília Sofia
An appealing strategy that overcomes the hydrophobicity of pristine graphene and favors its interaction with biological media is colloidal stabilization in aqueous medium with the support of a biomolecule, such as flavin mononucleotide (FMN), as exfoliating/dispersing agent. However, to establish FMN-stabilized graphene (PG-FMN) as suitable for use in biomedicine, its biocompatibility must be proved by a complete assessment of cytotoxicity at the cellular level. Furthermore, if PG-FMN is to be proposed as a theranostic agent, such a study should include both healthy and tumoral cells and its outcome should reveal the nanomaterial as selectively toxic to the latter. Here, we provide an in-depth comparative in vitro analysis of the response of Saos-2 human sarcoma osteoblasts (model tumor cells) and MC3T3-E1 murine preosteoblasts (undifferentiated healthy cells) upon incubation with different concentrations (10–50 μg mL–1) of PG-FMN dispersions constituted by flakes with different average lateral size (90 and 270 nm). Specifically, the impact of PG-FMN on the viability and cell proliferation, reactive oxygen species (ROS) production, and the cellular incorporation process, cell-cycle progression, and apoptosis has been evaluated. PG-FMN was found to be toxic to both types of cells by increasing ROS production and triggering cell-cycle arrest. The present results constitute a cautionary tale on the need to establish the effect of a nanomaterial not only on tumor cells but also on healthy ones before proposing it as anticancer agent., J. I. P. and S. V.-R. gratefully acknowledge funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00, as well as Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233). Mónica Cicuéndez acknowledges the financial support from the FCT [SFRH/BPD/101468/2014 Postdoctoral Grant]. Virgília S. Silva was funded by national funds (OE), through FCT, in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. FCT – Fundação para a Ciência e a Tecnologia, I.P., is also acknowledged for the research contract under Scientific Employment Stimulus to H. Oliveira (CEECIND/04050/2017). Thanks are due for the financial support to CESAM (UIDB/50017/2020+UIDP/50017/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Simple and Expeditious Route to Phosphate-Functionalized, Water-Processable Graphene for Capacitive Energy Storage

  • Ramírez-Soria, Edgar H
  • García-Dalí, Sergio
  • Munuera Fernández, José María
  • Fernández Carrasco, Daniel
  • Villar Rodil, Silvia
  • Díez Tascón, Juan Manuel
  • Paredes Nachón, Juan Ignacio
  • Bonilla-Cruz, José
Phosphate-functionalized carbon-based nanomaterials have attracted significant attention in recent years owing to their outstanding behavior in electrochemical energy-storage devices. In this work, we report a simple approach to obtain phosphate-functionalized graphene (PFG) via anodic exfoliation of graphite at room temperature with a high yield. The graphene nanosheets were obtained via anodic exfoliation of graphite foil using aqueous solutions of H3PO4 or Na3PO4 in the dual role of phosphate sources and electrolytes, and the underlying exfoliation/functionalization mechanisms are proposed. The effect of electrolyte concentration was studied, as low concentrations do not lead to a favorable graphite exfoliation and high concentrations produce fast graphite expansion but poor layer-by-layer delamination. The optimal concentrations are 0.25 M H3PO4 and 0.05 M Na3PO4, which also exhibited the highest phosphorus contents of 2.2 and 1.4 at. %, respectively. Furthermore, when PFG-acid at 0.25 M and PFG-salt at 0.05 M were tested as an electrode material for capacitive energy storage in a three-electrode cell, they achieved a competitive performance of ∼375 F/g (540 F/cm3) and 356 F/g (500 F/cm3), respectively. Finally, devices made up of symmetric electrode cells obtained using PFG-acid at 0.25 M possess energy and power densities up to 17.6 Wh·kg-1 (25.3 Wh·L-1) and 10,200 W/kg; meanwhile, PFG-salt at 0.05 M achieved values of 14.9 Wh·kg-1 (21.3 Wh·L-1) and 9400 W/kg, with 98 and 99% of capacitance retention after 10,000 cycles, respectively. The methodology proposed here also promotes a circular-synthesis process to successfully achieve a more sustainable and greener energy-storage device., E.H.R.-S. and J.B.-C. give thanks to CONACYT-México for the doctoral scholarship for E.H.R.-S, and for the project 182631-2012 granted. Funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G.-D. is grateful to the Spanish MICINN for his pre-doctoral contract (BES/2016 077830)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heteropolyacids supported on boron nitride and carbon nitride for catalytic and catalytic photo-assisted alcohol dehydration

  • García-López, Elisa I.
  • Pomilla, Francesca R.
  • Krivtsov, Igor
  • Serrano, Aida
  • Liotta, Leonarda F.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Marcì, Giuseppe
Keggin H3PW12O40 (PW12) and Wells-Dawson H6P2W18O60 (P2W18) heteropolyacids (HPAs) are photo(catalysts) for various acid-promoted and redox catalytic reactions. Their activity increases if they are deposited on certain supports as metal oxides or carbon materials. Although the surface area and acid-base interactions of the HPAs with supports are considered as key factors for the performance of the binary material, the role of the local structure changes in the HPAs upon their immobilization on solids must be also of primary importance, directly affecting both acidity and photoredox properties. Here, the (photo)catalytic performance of Keggin and Wells-Dawson heteropolytungstates supported on boron nitride (BN) and two types of carbon nitride (C3N4) in the gas-solid 2-propanol dehydration to propene has been studied. Apart from characterizing the materials by a set of conventional laboratory-scale structural and physical-chemical techniques, an insight into the variations of the local structure of supported HPAs is provided by means of X-ray absorption spectroscopy (XAS), and their influence on the supported HPAs (photo)catalytic activity is discussed. The irradiation with UV light increased the activity of both heteropolytungstates with respect to the catalytic experiments. The apparent activation energy calculated for the photo-assisted process resulted always lower with respect to that obtained for the catalytic one alone. Moreover, the materials that showed the highest apparent turnover frequency (TOF) were those in which the HPAs were impregnated on graphitic C3N4 or on BN and, in particular, the highest TOF values were observed at the highest temperature for the PW12/BN and P2W18/BN samples. Interestingly, the highest activity of HPAs supported on BN seems to be due to the stabilization of the W octahedral coordination, according to the XAS data., LFL is grateful to progetto di Ricerca ARS01_00637 Energie per l’Ambiente-TARANTO (PNR 2015-2020) for financial support. IK acknowledges support by Spanish MINECO (MAT2016-78155-C2-1-R), Gobierno del Principado de Asturias (GRUPIN-ID2018-170) and the Alexander von Humboldt Foundation through the Humboldt Research Fellowship. S.V.-R. and J.I.P. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIU), the Spanish Agencia Estatal de Investigación and European Regional Development Fund (ERDF) through project RTI2018-100832B-I00, and partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233). A.S acknowledges financial support from the MCIU through the projects MAT2017-86540-C4-1-R and RTI2018-095303-A-C52 and from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017t2/IND5395). The European Synchrotron (ESRF), MCIU and Consejo Superior de Investigaciones Científicas (CSIC) are also acknowledged for the provision of synchrotron radiation facilities. We also thank the BM25-SpLine staff for the technical support beyond their duties., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of graphene oxide's characteristics on the fabrication and performance of crosslinked nanofiltration membranes

  • Kandjou, Vepika
  • González Arias, Zoraida
  • Acevedo, Beatriz
  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Melendi Espina, Sonia
Graphene oxide (GO) is emerging as an excellent next generation material for water purification membranes. Its ability to be fabricated cost-effectively in large quantities and featured characteristics, such as hydrophilicity, makes it an equitable graphene alternative in respective nanometric applications, including nanofiltration. In this study, the influence of key properties of the GO sheets, such as lateral size, surface chemistry and colloid stability, on the successful fabrication and subsequent water purification performance of crosslinked nanofiltration membranes is analysed. GO water suspensions with nanosheets of different lateral sizes and distribution of oxygenated functional groups were prepared by controlling the sonication time (from 0 to 180 min) starting from commercial GO. The variation of the physicochemical characteristics of the resulting GO sheets was comprehensively studied by means of atomic force microscopy, UV–Vis absorption spectroscopy, zeta potential measurements and X-Ray photoelectron spectroscopy. The morphology of the subsequently fabricated membranes was hereafter examined via scanning electron microscopy, while their nanofiltration performance was investigated against methylene blue solution. The influence of GO's physicochemical characteristics on membrane performance was apparent, with the average rejection values ranging from 59.8% to 98.4% at a changing lateral size and surface chemistry., V.K. special gratitude to the Botswana Government's Top Achievers Scholarship Programme for the scholarship (TR.163096). J.M.M. and J.I.P. acknowledge funding from the Ministerio de Ciencia, Innovación y Universidades (MICINN, Spain), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Irreversible deformation of hyper-crosslinked polymers after hydrogen adsorption

  • Ramirez-Vidal, Pamela
  • Suárez García, Fabián
  • Canevesi, Rafael L S
  • Castro Muñiz, Alberto
  • Gadonneix, Philippe
  • Paredes Nachón, Juan Ignacio
  • Celzard, Alain
  • Fierro, Vanessa
Hyper-crosslinked polymers (HCPs) have been produced by the Friedel-Crafts reaction using anthracene, benzene, carbazole or dibenzothiophene as precursors and dimethoxymethane as crosslinker, and the effect of graphene oxide (GO) addition has been studied. The resulting HCPs were highly microporous with BET areas (ABET) between 590 and 1120 m2g-1. The benzene-derived HCP (B1FeM2) and the corresponding composite with GO (B1FM2-GO) exhibited the highest ABET and were selected to study their hydrogen adsorption capacities in the pressure range of 0.1 - 14 MPa at 77 K. The maximum H2 excess uptake was 2.1 and 2.0 wt% for B1FeM2 and B1FeM2-GO, respectively, at 4 MPa and 77 K. The addition of GO reduced the specific surface area but increased the density of the resultant HCP-GO composites, which is beneficial for practical applications and proves that materials giving higher gravimetric storage capacities are not necessarily those that offer higher volumetric capacities. H2 adsorption-desorption cycles up to 14 MPa showed irreversible deformation of both HCP and HCP-GO materials, which calls into question their application for hydrogen adsorption at pressures above 4 MPa., The French research team thanks CONACYT-SENER for the scholarship 708651/ 739301 of PRV. This study was also partly supported by ANR-15-IDEX-04-LUE and TALiSMAN project (2019-000214), funded by European Regional Development Fund (ERDF). Partial funding by the Spanish Ministerio de Ciencia, Innovación y Universidades, the Spanish Agencia Estatal de Investigación (AEI) and the ERDF through project RTI2018-100832-B-I00 is also gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

HKUST-1 Metal–Organic Framework Nanoparticle/Graphene Oxide Nanocomposite Aerogels for CO2 and CH4 Adsorption and Separation

  • Rosado, Albert
  • Borrás, Alejandro
  • Fraile, Julio
  • Navarro, Jorge A.R.
  • Suárez García, Fabián
  • Stylianou, Kyriakos C.
  • López Periago, Ana M.
  • Giner Planas, José
  • Domingo, Concepción
  • Yazdi, Amirali
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (SEV-2015-0496 and CEX2019-000917-S) and the Spanish National Plan of Research with projects CTQ2017-83632, PID2020-115631GB-I00, CTQ2016-75150-R, CTQ2017-84692-R, RTI2018-100832-B-I00, and PID2019-106832RB-I00. J.A.R.N. thanks Junta de Andalucia (P18-RT-612). K.C.S. thanks the Department of Chemistry through start-up funding. This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by A.R., A.B., and J.F.; A.R. and A.B. acknowledge FPI grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles

  • Cueto-Díaz, Eduardo J.
  • Suárez García, Fabián
  • Gálvez Martínez, Santos
  • Valles-González, María Pilar
  • Mateo-Martí, Eva
Efforts on CO2 capture have intensified as climate change compromises ecosystems and biodiversity. Therefore, it is crucial to develop different methods for CO2 sequestration to improve solid sorbent capabilities (NPs). To this end, the surface of 200-nm silica nanoparticles (SiO2NPs) was covalently anchored with aminated ligands, 3-aminopropyltriethoxysilane (APTES), poly(amidoamine) dendrimers (PAMAM) and a short peptide comprising two lysine units, aiming for CO2 adsorption over a wide range of pressures. Our goal was to explore the influence of functional chemical groups (attached to the SiO2NPs) on CO2 sequestration. The observed results showed that at low and high CO2 gas pressure conditions, typical APTES functionalized SiO2Np surpassed the CO2 adsorption capacities of dendritic and peptide-based nanoparticles bearing amine-polymer functionalities, a remarkable effect that was investigated in this work. In addition, a convenient and facile method to decorate and quantify SiO2 nanoparticles with PAMAM and a short peptide is reported., This work has been supported by MINECO grants PID2019-104205GB-C21 and PID2019-107442RB-C32) and has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”-Centro de Astrobiología (INTA-CSIC) and by PCTI 2013-2017 from the Principado de Asturias and ERDF through projects RTI2018-100832-B-I00 and IDI/2018/000233. E. C. D: Talent Attraction Postdoctoral Fellowship from CAM, reference: 2018-T2/TIC-10616. The authors also thank Maite Sampedro for her help during IR measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the properties of different graphene-based nanomaterials dispersed in polycaprolactone membranes on astrocytic differentiation

  • Mantecón-Oria, Marián
  • Tapia, Olga
  • Lafarga, Miguel
  • Berciano, María T
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Rivero, María J
  • Diban, Nazely
  • Urtiaga, Ane
Composites of polymer and graphene-based nanomaterials (GBNs) combine easy processing onto porous 3D membrane geometries due to the polymer and cellular differentiation stimuli due to GBNs fillers. Aiming to step forward to the clinical application of polymer/GBNs composites, this study performs a systematic and detailed comparative analysis of the influence of the properties of four different GBNs: (i) graphene oxide obtained from graphite chemically processes (GO); (ii) reduced graphene oxide (rGO); (iii) multilayered graphene produced by mechanical exfoliation method (Gmec); and (iv) low-oxidized graphene via anodic exfoliation (Ganodic); dispersed in polycaprolactone (PCL) porous membranes to induce astrocytic differentiation. PCL/GBN flat membranes were fabricated by phase inversion technique and broadly characterized in morphology and topography, chemical structure, hydrophilicity, protein adsorption, and electrical properties. Cellular assays with rat C6 glioma cells, as model for cell-specific astrocytes, were performed. Remarkably, low GBN loading (0.67 wt%) caused an important difference in the response of the C6 differentiation among PCL/GBN membranes. PCL/rGO and PCL/GO membranes presented the highest biomolecule markers for astrocyte differentiation. Our results pointed to the chemical structural defects in rGO and GO nanomaterials and the protein adsorption mechanisms as the most plausible cause conferring distinctive properties to PCL/GBN membranes for the promotion of astrocytic differentiation. Overall, our systematic comparative study provides generalizable conclusions and new evidences to discern the role of GBNs features for future research on 3D PCL/graphene composite hollow fiber membranes for in vitro neural models., This research was supported by projects PID2019-105827RB-I00 and PCI2018-092929 (5th EIG-Concert Japan joint call) funded by MCIN/AEI/10.13039/501100011033. “Instituto de Investigación Marqués de Valdecilla”, Santander, Spain (IDIVAL, support program APG10). Partial support was also given by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00, as well as by Plan de Ciencia, Tecnología e Innovación (PCTI) 2018–2022 del Principado de Asturias and ERDF through project IDI/2021/000037., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An electrochemical route to holey graphene nanosheets for charge storage applications

  • Fernández Carrasco, Daniel
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Suárez García, Fabián
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Holey graphene nanosheets are potentially useful in several relevant technological applications, including electrochemical energy storage and molecular separation. Access to this material is mostly accomplished by resorting to standard graphene oxides obtained by common routes (e.g., the Hummers method). However, such a type of highly oxidized graphenes may not be the best option as a precursor to holey graphene on account of their chemical/structural heterogeneity and harsh synthesis conditions. Here, we report the use of highly oxidized graphene nanosheets derived by an electrochemical exfoliation/oxidation strategy as an alternative precursor to holey graphene. Compared to a standard graphene oxide with the same extent of oxidation, the electrochemically derived precursor exhibited larger aromatic domains, which provided a structural basis for its higher electrical conductivity, as well as smaller and denser oxidized regions, associated to a higher chemical homogeneity and lability of its oxygen-containing functional groups. Through selective chemical etching of the oxidized domains, the latter feature was exploited to afford holey graphene nanosheets having smaller and more uniform holes. When used as an electrode material for electrochemical charge storage, the electrochemically derived holey graphene outperformed its standard graphene oxide-based counterpart in terms of capacity and energy density. Overall, boasting distinct structural and chemical characteristics, highly oxidized graphene obtained by electrochemical means can be regarded as a prospective advantageous precursor to many graphene-based materials whose preparation has traditionally relied on the processing of graphene oxides., Funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) through project RTI2018-100832-B-I00, as well as by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013–2017 and 2018–2022 del Principado de Asturias and the ERDF (projects IDI/2018/000233 and IDI/2021/000037) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Carbones activados preparados por carbonización de mezclas de biomasa y óxido de hierro

  • Narita, César Y.
  • Lorenzo Fierro, Sara
  • Castro Muñiz, Alberto
  • Mourão, M.B.
  • Suárez García, Fabián
Los autores agradecen la financiación recibida del Ministerio de Ciencia, Innovación y Universidades (MICINN), la Agencia Estatal de Investigación (AEI) y European Regional Development Fund (ERDF) a través del proyecto RTI2018-100832-B-I00, MICIU y del Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and ERDF (proyecto IDI/2021/000037)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Surface Organo-Silanization on SBA-15 Mesoporous Silicas in CO2 Adsorption Processes: Design, Synthesis, and Computational Studies

  • Cueto-Díaz, Eduardo J.
  • Castro Muñiz, Alberto
  • Suárez García, Fabián
  • Alkorta, Ibon
  • Valles-González, María Pilar
  • Mateo-Martí, Eva
Carbon dioxide solid sorbents produced from mesoporous functionalized silica microparticles (SBA-15) have been investigated (i) theoretically using density functional theory and (ii) evaluated empirically for assessing their CO adsorption capacity. Two different families of organosilyl groups have been tested possessing a common anchoring group (silanol), in one extreme, but bearing two different types of CO sensitive groups in the other extreme; (i) hyperbranched polymeric PAMAM moieties, carrying multiple −NH groups, and (ii) a collection of linear functional ending groups such as −SH, −SOH, −guanidine (Gdn), −NH, −NCO, and −N. The adsorption isotherms revealed that SBA-15 bearing (3-aminopropyl)triethoxysilane (APTES) showed an impressive 3.4-fold adsorption enhancement at 1 bar and 50 °C when compared to the pristine SBA-15, following a straightforward synthetic protocol. The maximum adsorption capacity was increased from 0.34 mmol/g (SBA-15) to 1.15 mmol/g (SBA-15@NH) under conditions relevant to CO capture (1 bar and 50 °C). We also found intriguing certain discrepancies observed between the calculated CO isotherms and the theorized binding energy in two of the materials. This will be addressed in the present work., This work has been supported by MINECO grants PID2019- 104205GB-C21 and PID2019-107442RB-C32. This study was also financed by Ministerio de Ciencia e Innovació n (MICINN) through project RTI2018-100832-B-I00 and by the Principado de Asturias and the ERDF (project IDI/2021/ 000037). We finally acknowledge funding through Talent Attraction Postdoctoral Fellowship, ref. 2018-T2/TIC-10616, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling the role of the carbon matrix in the magnetic coupling of Ni@C nanoparticles with mixed FCC/HCP crystal structures

  • Fadel, Mona
  • Martín Jimeno, Francisco Julián
  • Fernández-García, M. P.
  • Suárez García, Fabián
  • Paredes Nachón, Juan Ignacio
  • Belo, J. H.
  • Araújo, J. P.
  • Adawy, Alaa
  • Martínez-Blanco, David
  • Álvarez-Alonso, Pablo
  • Blanco, Jesús A.
  • Gorria, Pedro
Nowadays, Ni@C nanostructured materials are attracting a great deal of attention due to their multiple catalytic or magnetic functionalities. In this article we report on the investigation of the correlation between the microstructure and magnetic properties of Ni nanoparticles embedded in a carbon matrix. The samples were obtained following a two-step procedure that ensures protection against nanoparticle oxidation, and was carried out in the following way: (i) the synthesis of a nickel-imidazole-based metal-organic framework (MOF) by a simple method in an aqueous medium at moderate temperature (95 °C); and (ii) carbonization of the MOF at different temperatures between 400 and 600 °C to obtain a carbon-supported hybrid material, containing Ni nanoparticles with an “artichoke-like” morphology, where a Ni-FCC core is surrounded by “bracts” of Ni-HCP and Ni3C. The average size of the nanoparticle slightly changes from 7 to 10 nm as the carbonization temperature is increased, but the Ni-FCC core diameter ranges from 3 to around 6 nm. We show how the information obtained on the evolution of the magnetic behaviour with carbonization temperature, using X-ray diffraction and electron microscopy, complements each other by providing consistent structural and magnetic characteristics of the investigated Ni@C nanoparticles. In fact, this joint analysis allows us to explain the formation and transformation of different Ni-based crystalline phases along the synthesis process, including Ni3C and Ni with both hexagonal and cubic crystalline structures. The amount of conventional Ni-FCC is below 10 wt% for the sample treated at 400 °C and it can reach up to 50 wt% for that treated at 600 °C. Finally, based on our current findings we propose an explanation for understanding the magnetic properties of Ni@C, in which the Ni-FCC core spins mainly govern the magnetic coupling of the whole system., This work was supported by the Spanish MICINN, Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) through projects RTI2018-094683-B-C52 (Univ. Oviedo) & RTI2018-100832-B-I00 (INCAR-CSIC), as well as by the Plan de Ciencia, Tecnología e Innovación (PCTI) 2018-2022 del Principado de Asturias and the ERDF through projects AYUD/2021/51822 (Univ. Oviedo) and IDI/2021/000037 (INCAR-CSIC). A. Adawy acknowledges the financial support received from research projects MCI-21-PID2020-113558RB-C41 (MICINN) and GRUPIN-IDI/2018/170 (Principado de Asturias) to pursue her work at the Univ. Oviedo., Peer reviewed