Pasar al contenido principal

DESARROLLO DE GRAFENO, OTROS MATERIALES BIDIMENSIONALES Y SUS HETEROESTRUCTURAS PARA APLICACIONES ENERGETICAS Y MEDIOAMBIENTALES

MAT2015-69844-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomolecule-assisted exfoliation and dispersion of graphene and other two-dimensional materials: a review of recent progress and applications

  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
Direct liquid-phase exfoliation of layered materials by means of ultrasound, shear forces or electrochemical intercalation holds enormous promise as a convenient, cost-effective approach to the mass production of two-dimensional (2D) materials, particularly in the form of colloidal suspensions of high quality and micrometer- and submicrometer-sized flakes. Of special relevance due to environmental and practical reasons is the production of 2D materials in aqueous medium, which generally requires the use of certain additives (surfactants and other types of dispersants) to assist in the exfoliation and colloidal stabilization processes. In this context, biomolecules have received, in recent years, increasing attention as dispersants for 2D materials, as they provide a number of advantages over more conventional, synthetic surfactants. Here, we review research progress in the use of biomolecules as exfoliating and dispersing agents for the production of 2D materials. Although most efforts in this area have focused on graphene, significant advances have also been reported with transition metal dichalcogenides (MoS2, WS2, etc.) or hexagonal boron nitride. Particular emphasis is placed on the specific merits of different types of biomolecules, including proteins and peptides, nucleotides and nucleic acids (RNA, DNA), polysaccharides, plant extracts and bile salts, on their role as efficient colloidal dispersants of 2D materials, as well as on the potential applications that have been explored for such biomolecule-exfoliated materials. These applications are wide-ranging and encompass the fields of biomedicine (photothermal and photodynamic therapy, bioimaging, biosensing, etc.), energy storage (Li- and Na-ion batteries), catalysis (e.g., catalyst supports for the oxygen reduction reaction or electrocatalysts for the hydrogen evolution reaction), or composite materials. As an incipient area of research, a number of knowledge gaps, unresolved issues and novel future directions remain to be addressed for biomolecule-exfoliated 2D materials, which will be discussed in the last part of this review., Financial support from the Spanish MINECO and the European Regional Development Fund (ERDF) through project MAT2015-69844-R as well as from “Plan de Ciencia, Tecnología e Innovación 2013-2017 del Principado de Asturias” and ERDF (project GRUPIN14-056) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Covalent Functionalization on the Aqueous Processability, Catalytic Activity, and Biocompatibility of Chemically Exfoliated MoS2 Nanosheets

  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Guardia, Laura
  • Ayán-Varela, Miguel
  • Pagán, Ana
  • Aznar-Cervantes, Salvador
  • Cenis, José Luis
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Chemically exfoliated MoS2 (ce-MoS2) has emerged in recent years as an attractive two-dimensional material for use in relevant technological applications, but fully exploiting its potential and versatility will most probably require the deployment of appropriate chemical modification strategies. Here, we demonstrate that extensive covalent functionalization of ce-MoS2 nanosheets with acetic acid groups (∼0.4 groups grafted per MoS2 unit) based on the organoiodide chemistry brings a number of benefits in terms of their processability and functionality. Specifically, the acetic acid-functionalized nanosheets were furnished with long-term (>6 months) colloidal stability in aqueous medium at relatively high concentrations, exhibited a markedly improved temporal retention of catalytic activity toward the reduction of nitroarenes, and could be more effectively coupled with silver nanoparticles to form hybrid nanostructures. Furthermore, in vitro cell proliferation tests carried out with murine fibroblasts suggested that the chemical derivatization had a positive effect on the biocompatibility of ce-MoS2. A hydrothermal annealing procedure was also implemented to promote the structural conversion of the functionalized nanosheets from the 1T phase that was induced during the chemical exfoliation step to the original 2H phase of the starting bulk material, while retaining at the same time the aqueous colloidal stability afforded by the presence of the acetic acid groups. Overall, by highlighting the benefits of this type of chemical derivatization, the present work should contribute to strengthen the position of ce-MoS2 as a two-dimensional material of significant practical utility., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (FEDER) through project MAT2015-69844-R is gratefully acknowledged, as well as partial support of the ERDF/FEDER. Operative Program of the Región de Murcia 2007–2013. We also acknowledge partial funding by Plan de Ciencia, Tecnología e Innovación 2013-2017 del Principado de Asturias and FEDER through grant GRUPIN14-056., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A direct route to activated two-dimensional cobalt oxide nanosheets for electrochemical energy storage, catalytic and environmental applications

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • García-Dalí, Sergio
  • Castro Muñiz, Alberto
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Two-dimensional Co3O4 nanosheets have emerged as attractive materials for use in a number of relevant technological applications. To exhibit a competitive performance in such uses, however, their structure needs to be activated, which is frequently accomplished via post-synthesis reduction strategies that introduce oxygen vacancies and increase the number of active Co(II) sites. Here, we investigate a direct route for the synthesis of activated Co3O4 nanosheets that avoids reduction post-treatments, yielding materials with a high potential towards energy- and environment-related applications. The synthesis relied on an interim amorphous cobalt oxide material with nanosheet morphology, which upon calcination afforded Co3O4 nanosheets having Co(II) sites in quantities similar to those usually found for Co3O4 nanostructures activated by reduction post-treatments. When tested as electrodes for charge storage, the nanosheets demonstrated a competitive behavior in terms of both capacity and rate capability, e.g., a gravimetric capacity of ∼293 mAh g−1 at 1 A g−1 with 57% retention at 60 A g−1 was measured for nanosheets calcined at 350 °C. The materials were shown to be efficient catalysts for the reduction of nitroarenes (4-nitrophenol and 4-nitroaniline), outperforming other Co3O4 nanostructures, as well as effective adsorbents for the removal of organic dyes (methyl orange, methylene blue) from water., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R is gratefully acknowledged. We are also grateful to Plan de Ciencia, Tecnología e Innovación, Spain 2013-2017 del Principado de Asturias and the ERDF, European Union for partial funding through project IDI/2018/000233. J.M.M. and S.G-D. are grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) and MINECO, respectively, for their pre-doctoral contracts (FPU14/00792 and BES/2016 077830, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A simple strategy to improve the yield of graphene nanosheets in the anodic exfoliation of graphite foil

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
  • Villar Rodil, Silvia
Strategies that improve the yield of graphene nanosheets in anodic exfoliation processes are desirable for the mass production of this material. Here, a simple pre-treatment of graphite foil with concentrated HSO is demonstrated to be such an effective strategy, affording overall exfoliation yields up to ∼50 wt% under certain experimental conditions, compared with a baseline value of ∼10 wt% for untreated graphite. Filling of inner voids and interstices of the graphite foil with HSO molecules was concluded to be responsible for the enhanced exfoliation performance. Additional approaches to further increase the anodic exfoliation yield are also proposed and discussed., Financial support from both the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R is gratefully acknowledged. Partial funding by both Plan de Ciencia, Tecnología e Innovación 2013–2017 del Principado de Asturias and the ERDF (project GRUPIN14-056) is also acknowledged. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS2 flakes stabilized with DNA/RNA nucleotides: In vitro cell response

  • Cicuéndez, M.
  • Silva, V. S.
  • Santos, J.
  • Coimbra, A.
  • Oliveira, H.
  • Ayán-Varela, Miguel
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Vila, M.
Two-dimensional transition metal dichalcogenides (TMDCs), such as MoS2 and WS2, have recently emerged as nanomaterials with potential use in biomedicine. An attractive means to favor their interaction with biological media is the use of proper biomolecules as exfoliating/dispersing agents. Here, MoS2 flakes were stabilized with different small functional biomolecules such as adenosine monophosphate (AMP), guanosine monophosphate (GMP) and flavin mononucleotide (FMN) through the strong nucleotide−MoS2 interaction of Lewis acid-base type, rather than just on the weak dispersive and hydrophobic forces commonly associated with the use of many surfactants. The impact of the nucleotide-stabilized MoS2 flakes on the viability and cell proliferation, on the production of intracellular reactive oxygen species (ROS), and on the preosteoblast differentiation process (early stage) has been also evaluated, as well as the incorporation and intracellular localization of the nanomaterials by MC3T3-E1 and Saos-2 cells. The nucleotide-stabilized MoS2 flakes were found to exhibit excellent biocompatibility. Furthermore, their incorporation did not affect the integrity of the cell plasma membrane, which makes them ideal candidates for delivering drug/gene directly into cells. The in vitro cell response of tumor cells to these nanomaterials differs from that of undifferentiated cells, which provides the basis for their potential use in cancer therapy., M. Cicuéndez acknowledges the FCT financial support [Post-Doctoral Grant SFRH/BPD/101468/2014] and Operational Program Human Capital (POCH), European Union. V.S. Silva acknowledges financial support from the FCT [SFRH/BPD/110269/2015 Post-Doctoral grant]. H. Oliveira acknowledges financial support FCT SFRH/BPD/111736/2015. M. A.-V., S. V.-R. and J. I. P gratefully acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is also acknowledged. M.A-V. is grateful to MINECO for his pre-doctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A biosupramolecular approach to graphene: Complementary nucleotide-nucleobase combinations as enhanced stabilizers towards aqueous-phase exfoliation and functional graphene-nucleotide hydrogels

  • Caridad, Bárbara
  • Paredes Nachón, Juan Ignacio
  • Pérez-Vidal, Óscar
  • Villar Rodil, Silvia
  • Pagán, A.
  • Cenis, J. L.
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The ability to use RNA/DNA nucleotides as colloidal stabilizers for graphene would be an important asset, as a close graphene-nucleotide association would facilitate access to hybrid systems where the rich covalent and supramolecular chemistry of these biomolecules could be exploited alongside graphene in a number of applications. Unfortunately, single RNA/DNA nucleotides are inefficient graphene dispersants. Here we propose and demonstrate a supramolecular strategy which overcomes this limitation, affording aqueous dispersions of high quality graphene flakes with much improved colloidal stability. A nucleotide is combined with its complementary nucleobase yielding stable hydrogen-bonded supramolecular entities that adsorb more strongly on the graphene surface than their individual components. Based on this approach, graphene-nucleotide hybrid hydrogels could be readily obtained, where the graphene flakes were intimately and uniformly intermixed with the nucleotide-based gel phase. Such hydrogels exhibited higher uptakes and/or slower release profiles of dyes and drugs (rhodamine B, methylene blue and tetracycline) than their graphene-free counterparts. Cell proliferation tests suggested the graphene materials obtained with nucleotide-nucleobase stabilizers to be biocompatible. The present results constitute a novel strategy in the processing and molecular integration of graphene that could be extended to other (bio)molecules of interest towards the realization of functional materials for different applications., Financial support from both the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (project MAT2015-69844-R) is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013–2017 del Principado de Asturias and the ERDF (project GRUPIN14-056) is acknowledged as well. B.C. and O.P-V. are grateful to the European Social Fund for funding their contracts. A.P. is thankful for her research contract partially supported (80%) by the ERDF/FEDER Operative Programme of Región de Murcia (project no. 14-20-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Pt electrocatalysts supported onto flavin mononucleotide–exfoliated pristine graphene for the methanol oxidation reaction

  • Ayán-Varela, Miguel
  • Ruiz-Rosas, R.
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Cazorla-Amorós, D.
  • Morallón, E.
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Due to its large surface area, high electrical conductivity as well as mechanical and thermal stability, pristine graphene has the potential to be an excellent support for metal nanoparticles (NPs), but the scarce amount of intrinsic chemical groups/defects in its structure that could act as anchoring sites for the NPs hinders this type of use. Here, a simple strategy based on the stabilization of pristine graphene in aqueous dispersion with the assistance of a low amount of flavin mononucleotide (FMN) is shown to yield a material that combines high electrical conductivity and abundance of extrinsic anchoring sites, so that pristine graphene–metal (Pd and Pt) NP hybrids with good dispersion and metal loading can be obtained from FMN–stabilized graphene. The activity of these hybrids towards the methanol oxidation reaction (MOR) both in acidic and alkaline media is studied by cyclic voltammetry (CV) and their stability investigated by chronoamperometry. The pristine graphene–Pt NP hybrid prepared by this simple, eco–friendly protocol is demonstrated to outperform most previously reported pristine graphene– and reduced graphene oxide–metal NP hybrids as electrocatalyst for the MOR, both in terms of catalytic activity and stability, avoiding at the same time the use of harsh chemicals or complex synthetic routes., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (FEDER) through projects MAT2015-69844-R and MAT2016-76595-R is gratefully acknowledged. We also acknowledge partial funding by Plan de Ciencia, Tecnología e Innovación 2013-2017 del Principado de Asturias and FEDER through grant GRUPIN14-056. M.A-V. is thankful to MINECO and for his pre-doctoral contract. R.R.R acknowledges financial support from MINECO through “Juan de la Cierva” program (JCI-2012-12664)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High quality, low-oxidized graphene via anodic exfoliation with table salt as an efficient oxidation-preventing co-electrolyte for water/oil remediation and capacitive energy storage applications

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Castro Muñiz, Alberto
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The production of graphene through anodic exfoliation of graphite in water is regarded as a competitive approach in the efforts to scale-up the manufacturing of this two-dimensional material for different practical uses. However, issues related to oxidative attack of the nanosheets inherent to this delamination process have traditionally precluded the attainment of high quality materials, with the use of proper electrolyte additives as oxidation-preventing agents being proposed as a possible way out. Here we demonstrate that sodium chloride (table salt) can be used as a highly efficient additive (co-electrolyte) of common sulfate-based electrolytes, yielding anodically exfoliated graphene with minimal oxidation (O/C ratio ∼0.02–0.03) and thus a high structural quality. As an oxidation-preventing co-electrolyte, sodium chloride clearly outperformed other tested additives, including sodium borohydride, sulfite, citrate, bromide and iodide, ascorbic acid or ethanol, as well as other recently reported chemical species of a more complex nature and/or less readily available. The apparently contradicting ability of the chloride anion to avert oxidation of anodic graphene without negatively interfering with the exfoliation process itself was also discussed and ultimately ascribed to the different chemical reactivity of graphite edges and basal planes. The as-prepared, low-oxidized graphene exhibited a notable adsorption capacity toward organic dyes in aqueous solution (e.g., ∼450 mg g−1 for methyl orange), a substantial ability to absorb oils and non-polar organic solvents (15–30 g g−1), and displayed a good capacitive energy storage behavior (e.g., ∼120 F g−1 at 0.1 A g−1), all without the need of any post-processing steps that are so common for graphene-based materials. Overall, the demonstration that low-oxidized anodic graphene can be obtained by resorting only to inexpensive and widely available reagents should facilitate the implementation of this methodology in the industrial manufacturing of high quality graphene for several applications., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R is gratefully acknowledged. We also acknowledge partial funding by Plan de Ciencia, Tecnología e Innovacción 2013–2017 del Principado de Asturias and the ERDF through project GRUPIN14-056. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Exfoliation of Transition Metal Dichalcogenides Assisted by DNA/RNA Nucleotides: Catalytically Active and Biocompatible Nanosheets Stabilized by Acid–Base Interactions

  • Ayán-Varela, Miguel
  • Pérez-Vidal, Óscar
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Díaz-González, María
  • Fernández Sánchez, César
  • Silva, Virgilia S.
  • Cicuéndez, Mónica
  • Vila, Mercedes
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials & Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://pubs.acs.org/doi/10.1021/acsami.6b13619, The exfoliation and colloidal stabilization of layered transition metal dichalcogenides (TMDs) in an aqueous medium using functional biomolecules as dispersing agents have a number of potential benefits toward the production and practical use of the corresponding two-dimensional materials, but such a strategy has so far remained underexplored. Here, we report that DNA and RNA nucleotides are highly efficient dispersants in the preparation of stable aqueous suspensions of MoS2 and other TMD nanosheets at significant concentrations (up to 5–10 mg mL–1). Unlike the case of common surfactants, for which adsorption on 2D materials is generally based on weak dispersive forces, the exceptional colloidal stability of the TMD flakes was shown to rely on the presence of relatively strong, specific interactions of Lewis acid–base type between the DNA/RNA nucleotide molecules and the flakes. Moreover, the nucleotide-stabilized MoS2 nanosheets were shown to be efficient catalysts in the reduction of nitroarenes (4-nitrophenol and 4-nitroaniline), thus constituting an attractive alternative to the use of expensive heterogeneous catalysts based on noble metals, and exhibited an electrocatalytic activity toward the hydrogen evolution reaction that was not impaired by the possible presence of nucleotide molecules adsorbed on their active sites. The biocompatibility of these materials was also demonstrated on the basis of cell proliferation and viability assays. Overall, the present work opens new vistas on the colloidal stabilization of 2D materials based on specific interactions that could be useful toward different practical applications., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project GRUPIN14-056) is also acknowledged. M.A-V. and J.M.M. are grateful to MINECO and the Spanish Ministerio de Educación, Cultura y Deporte (MECD), respectively, for their pre-doctoral contracts. O.P-V. acknowledges funding of his contract by the European Social Fund (ESF). M.C. is grateful to FCT (Fundação para a Ciência e a Tecnologia) for financial support through the post-doctoral grant SFRH/BPD/101468/2014, co-financed by national funds from the Portuguese Ministry of Education and Science and the ESF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An aqueous cathodic delamination route towards high quality graphene flakes for oil sorption and electrochemical charge storage applications

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The electrochemical exfoliation of graphite in aqueous medium stands out as an attractive, scalable approach for the production of graphenes for different applications, due to its simplicity, cost-effectiveness and environmental friendliness. In particular, cathodic exfoliation in water should allow access to high quality, non-oxidized graphene flakes, as it avoids the intrinsic oxidizing conditions that typically plague the anodic route, but this possibility has been limited by a poor intercalation ability of aqueous cations. Here, we demonstrate that with a proper choice of starting graphite and electrolyte, high quality graphene flakes can be obtained in substantial yields via cathodic delamination in water. Graphites having some pre-expanded edges and interlayer voids (e.g., graphite foil) were found to be critical for a successful exfoliation. Large differences in the efficiency of a range of aqueous quaternary ammonium-based electrolytes were observed, quantitatively compared and rationalized on the basis of their chemical structure. Graphene yields up to 40–50 wt% were attained with the most efficient cations (tetrapropylammonium and hexyltrimethylammonium). Hydrophobic sponges made up of cathodic graphene-coated melamine foam exhibited a notable capacity towards the sorption of oils and organic solvents from water with good re-usability. Hybrids comprised of cathodically exfoliated graphite and a small amount of vertically oriented cobalt oxide nanosheets displayed good electrochemical charge storage behavior. Overall, the ability to access graphene flakes in considerable yields by the aqueous cathodic route disclosed here should raise the prospects of cathodic exfoliation as a competitive method for the industrial manufacturing of high quality graphene for practical applications., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also aknowledged. S.G-D. and J.M.M. are grateful to MINECO and the Spanish Ministerio de Educación, Cultura y Deporte (MECD), respectively, for their pre-doctoral contracts (BES/2016 077830 and FPU14/00792, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidized graphitic carbon nitride nanosheets as an effective adsorbent for organic dyes and tetracycline for water remediation

  • Yousefi, Mahdieh
  • Villar Rodil, Silvia
  • Paredes Nachón, Juan Ignacio
  • Moshfegh, Alireza Z.
Graphitic carbon nitride (g-C3N4) is promising as adsorbent for water remediation as its chemical structure allows a variety of mechanisms to interact with wastewater pollutants. However, several issues, such as low specific surface area and insufficient dispersibility in water, have to be tackled to achieve a competitive performance in such use. Previous attempts to improve the features of g-C3N4as an adsorbent have relied on carbon doping and exfoliation in the solid phase by thermal expansion. Here, we demonstrate that exfoliation in the liquid phase by a combination of oxidation and sonication allows preparing g–C3N4–based materials with improved dispersibility in water, increased exposed surface, and abundance of surface functional groups. The obtained oxidized g-C3N4 adsorbents exhibited high adsorption capacities which were remarkable towards organic dyes (∼70–600 mg/g) and excellent in the case of the antibiotic tetracycline (895 mg/g) in aqueous solution. The present results should open new opportunities for the use of oxidized g-C3N4 materials as adsorbents for water remediation., S. V.-R. and J. I. P gratefully acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, as well as the Spanish Ministerio de Ciencia, Innovación y Universidades and the ERDF through project RTI2018-100832-B-I00. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013–2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is also acknowledged. A. Z. M. thanks Sharif University of Technology and the Iran National Science Foundation (Grant No. 940009) for partial support. M. Y. acknowledges the Iran Elite Foundation for supporting sabbatical leave., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous Cathodic Exfoliation Strategy toward Solution-Processable and Phase-Preserved MoS2 Nanosheets for Energy Storage and Catalytic Applications

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials and Interfaces, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsami.9b13484, The production of MoS2 nanosheets by electrochemical exfoliation routes holds great promise as a means to access this two-dimensional material in large quantities for different practical applications. However, the use of electrolytes based on synthetic organic salts and solvents, as well as issues related to the unwanted oxidation and/or phase transformation of the exfoliated nanosheets, constitute significant obstacles that hinder the industrial adoption of the electrochemical approach. Here, we introduce a safe and sustainable method for the cathodic delamination of MoS2 that makes use of aqueous solutions of very simple and widely available salts, mainly KCl, as the electrolyte. Combined with an appropriate biomolecule-based solvent transfer protocol, such an electrolytic exfoliation route is shown to afford colloidally dispersed, oxide-free, and phase-preserved MoS2 nanosheets of high structural quality in considerable yields. The mechanisms behind the efficient aqueous delamination of the bulk MoS2 cathode are also discussed and rationalized on the basis of the penetration of hydrated cations from the electrolyte between its layers and the immediate reduction of the accompanying water molecules. An asymmetric supercapacitor assembled with a cathodic MoS2 nanosheet–single walled carbon nanotube hybrid as the positive electrode and activated carbon as the negative electrode delivered energy densities (e.g., 26 W h kg–1 at 750 W kg–1 in 6 M KOH) that were competitive with those of other MoS2-based asymmetric devices. When used as a catalyst for the reduction of nitroarenes, the present cathodically exfoliated nanosheets exhibited one of the highest activities reported so far with MoS2 nanostructures, the origin of which is accounted for as well. Overall, by facilitating access to this two-dimensional material through a particularly simple, efficient, and cost-effective technique, these results should expedite the practical implementation of MoS2 nanosheets in energy storage, catalysis, and beyond., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, the Spanish Ministerio de Ciencia, Innovación y Universidades and the ERDF through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G-D. and J.M.M. are grateful to Spanish MINECO and Ministerio de Educación, Cultura y Deporte (MECD), respectively, for their respective pre-doctoral contracts (BES/2016 077830 and FPU14/00792). The University of Oviedo acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Materials for Gas Separation Applications: Mixed Matrix Membranes Made from Linear Polyimides and Porous Polymer Networks Having Lactam Groups

  • Aguilar-Lugo, Carla
  • Suárez-García, Fabian
  • Hernández, Antonio
  • Miguel, Jesús A.
  • Lozano López, Ángel Emilio
  • Campa, José G. de la
  • Álvarez, Cristina
A set of mixed matrix membranes (MMMs) has been prepared by incorporating a triptycene-isatin porous polymer network (PPN) to three aromatic polyimides (one commercial, Matrimid, and two synthesized by us: 6FDA-6FpDA and 6FDA-TMPD) covering a wide range of performances for gas separation. The triptycene-isatin PPN is a highly microporous network having a high CO uptake and high chemical and thermal stability. The good compatibility between the components (PPN content of 15 and 30% w/w) was supported by the increase in the glass transition temperature of MMMs relative to the pure polyimide membranes. The addition of the PPN particles improved the permeability of all the gases tested, by increasing diffusivity and, in some cases, gas solubility. The improvements were particularly noticeable in Matrimid-based MMMs, where gas permeability increased by 700%, whereas CO/N and CO/CH ideal selectivities decreased by a mere 4% and 12%, respectively., We gratefully acknowledge Dr. Manuel Avella-Romero for the SEM images taken at the SEM−TEM Microscopy Facilities of the University of Valladolid; and Judit González Jarillo for the characterization of the mixed matrix membranes and the gas separation measurements. This work was supported by Spain’s MINECO (Projects MAT2016−76413-C2-R2, MAT2016− 76413-C2-R1, MAT2015−69844-R, and CTQ2016−80913- P), and the Spanish Junta de Castilla y León (Projects VA248U13 and VA051P17). Finally, we dedicate this article to Professor Pablo Espinet on his 70th birthday, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage inflammatory and metabolic responses to graphene-based nanomaterials differing in size and functionalization

  • Cicuéndez, Mónica
  • Fernandes, Márcia
  • Ayán-Varela, Miguel
  • Oliveira, Helena
  • Feito, María José
  • Díez-Orejas, Rosalía
  • Paredes Nachón, Juan Ignacio
  • Villar Rodil, Silvia
  • Vila, Mercedes
  • Portolés, María Teresa
  • Duarte, Iola F.
The preparation of graphene-based nanomaterials (GBNs) with appropriate stability and biocompatibility is crucial for their use in biomedical applications. In this work, three GBNs differing in size and/or functionalization have been synthetized and characterized, and their in vitro biological effects were compared. Pegylated graphene oxide (GO-PEG, 200–500 nm) and flavin mononucleotide-stabilized pristine graphene with two different sizes (PG-FMN, 200–400 nm and 100–200 nm) were administered to macrophages, chosen as cellular model due to their key role in the processing of foreign materials and the regulation of inflammatory responses. The results showed that cellular uptake of GBNs was mainly influenced by their lateral size, while the inflammatory potential depended also on the type of functionalization. PG-FMN nanomaterials (both sizes) triggered significantly higher nitric oxide (NO) release, together with some intracellular metabolic changes, similar to those induced by the prototypical inflammatory stimulus LPS. NMR metabolomics revealed that macrophages incubated with smaller PG-FMN displayed increased levels of succinate, itaconate, phosphocholine and phosphocreatine, together with decreased creatine content. The latter two variations were also detected in cells incubated with larger PG-FMN nanosheets. On the other hand, GO-PEG induced a decrease in the inflammatory metabolite succinate and a few other changes distinct from those seen in LPS-stimulated macrophages. Assessment of TNF-α secretion and macrophage surface markers (CD80 and CD206) further corroborated the low inflammatory potential of GO-PEG. Overall, these findings revealed distinct phenotypic and metabolic responses of macrophages to different GBNs, which inform on their immunomodulatory activity and may contribute to guide their therapeutic applications., This work was developed in the scope of the projects CICECO-Aveiro Institute of Materials, FCT Ref. UID/CTM/50011/2019, and CESAM, FCT Ref. UID/AMB/50017/2019, financed by national funds through FCT/MCTES, Portugal. The NMR spectrometers are part of the National NMR Network (PTNMR) and are partially supported by Infrastructure Project Nº 022161 (co-financed by FEDER through COMPETE 2020, POCI and PORL and FCT through PIDDAC). Further acknowledgments are due to Bruker BioSpinGmbH and the European Union Framework Programme for Research and Innovation HORIZON 2020, under the TEAMING Grant agreement No 739572 - The Discoveries CTR. I.F.D. and H.O. acknowledge FCT/MCTES for research contracts under the Programs ‘Investigador FCT’ and Stimulus to Scientific Employment (CEECIND/04050/2017), respectively, and M.C. acknowledges the FCT-awarded research grant SFRH/BPD/101468/2014. This research was also supported by the Spanish Ministerio de Economía y Competitividad (MAT2016-75611-R AEI/FEDER, UE). M.A.-V., S.V.-R. and J.I.P. acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, and from the Spanish Ministerio de Ciencia, Innovación y Universidades, the Spanish Agencia Estatal de Investigación and ERDF, through project RTI2018-100832-B-I00. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and ERDF (project IDI/2018/000233) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Performance Na-O2 Batteries and Printed Microsupercapacitors Based on Water-Processable, Biomolecule-Assisted Anodic Graphene

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Enterría, Marina
  • Villar Rodil, Silvia
  • Kelly, Adam G.
  • Nalawade, Yashaswi
  • Coleman, Jonathan N.
  • Rojo, Teófilo
  • Ortiz-Vitoriano, Nagore
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Integrated approaches that expedite the production and processing of graphene into useful structures and devices, particularly through simple and environmentally friendly strategies, are highly desirable in the efforts to implement this two-dimensional material in state-of-the-art electrochemical energy storage technologies. Here, we introduce natural nucleotides (e.g., adenosine monophosphate) as bifunctional agents for the electrochemical exfoliation and dispersion of graphene nanosheets in water. Acting both as exfoliating electrolytes and colloidal stabilizers, these biomolecules facilitated access to aqueous graphene bio-inks that could be readily processed into aerogels and inkjet-printed interdigitated patterns. Na-O2 batteries assembled with the graphene-derived aerogels as the cathode and a glyme-based electrolyte exhibited a full discharge capacity of ∼3.8 mAh cm–2 at a current density of 0.2 mA cm–2. Moreover, shallow cycling experiments (0.5 mAh cm–2) boasted a capacity retention of 94% after 50 cycles, which outperformed the cycle life of prior graphene-based cathodes for this type of battery. The positive effect of the nucleotide-adsorbed nanosheets on the battery performance is discussed and related to the presence of the phosphate group in these biomolecules. Microsupercapacitors made from the interdigitated graphene patterns as the electrodes also displayed a competitive performance, affording areal and volumetric energy densities of 0.03 μWh cm–2 and 1.2 mWh cm–3 at power densities of 0.003 mW cm–2 and 0.1 W cm–3, respectively. Taken together, by offering a green and straightforward route to different types of functional graphene-based materials, the present results are expected to ease the development of novel energy storage technologies that exploit the attractions of graphene., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also acknowledged. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792). J.N.C. acknowledges the ERC Adv. Gr. FUTUREPRINT. This work was also financially supported by the European Union (Graphene Flagship, Core 2, Grant number 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activation of two-dimensional MoS2 nanosheets by wet-chemical sulfur vacancy engineering for the catalytic reduction of nitroarenes and organic dyes

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Caridad, Bárbara
  • Villar Rodil, Silvia
  • Díaz-González, María Del Mar
  • Fernández-Sánchez, C.
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Two-dimensional 2H-phase MoS2 nanosheets can be used as a non-noble metal-based catalyst for nitroarene and organic dye reduction, thus being of potential utility towards the treatment of industrial wastewater. However, their activity is severely limited by the inertness of their pristine basal surface. We report here a simple approach for the catalytic activation of solvent-dispersed MoS2 nanosheets based on the introduction of sulfur vacancies by hydrazine treatment. MoS2 nanosheets boasting markedly improved catalytic activities in the reduction of 4-nitrophenol, 4-nitroaniline, methyl orange and methylene blue by NaBH4 could be obtained, outperforming many prior non-noble metal-based catalysts developed for such reactions. Notably, the improvement in catalytic activity was not compromised by the use of a proper dispersant to colloidally stabilize the activated nanosheets in the aqueous reaction medium. Substrate-supported catalysts could be prepared by immobilizing the nanosheets on melamine foam, facilitating their handling and reutilization. The chemical processes taking place between the investigated reagents and the MoS2 catalyst were also discussed and rationalized, based on which a mechanism for nitroarene/dye reduction mediated by the sulfur vacancies was proposed., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R, the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI) and the ERDF through project RTI2018-100832-B-I00, and Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF (project IDI/2018/000233) is gratefully acknowledged. S.G.-D. is grateful to the Spanish MINECO for his pre-doctoral contract (BES/2016 077830). A.A. acknowledges the financial support from Spanish MINECO (MAT2016-78155-C2-1-R) and the Government of the Principality of Asturias (GRUPIN-IDI/2018/170)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel nanoparticle/carbon catalysts derived from a novel aqueous-synthesized metal-organic framework for nitroarene reduction

  • Martín Jimeno, Francisco Julián
  • Suárez García, Fabián
  • Paredes Nachón, Juan Ignacio
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Carbon-supported, non-noble metal-based catalysts derived from metal-organic frameworks (MOFs) are attractive alternatives to noble metal-based systems, but typical syntheses of the starting MOFs are not desirable from an environmental and practical perspective (e.g., they rely on non-innocuous organic solvents and long reaction times). Here, we report the preparation of a Ni-based MOF in aqueous medium, at moderate temperature (95 °C) and in a short reaction time (<30 min), which was used as a sacrificial template to access a family of Ni nanoparticle/carbon hybrids that were then tested as catalysts in the reduction of 4-nitrophenol (4-NP). The MOF-derived hybrids exhibited a mesoporous texture, with specific surface areas between 250 and 450 m2 g−1 depending on the carbonization temperature applied to the MOF, as well as high Ni contents (between 36 and 57 wt%). Notwithstanding the latter, the metal was homogeneously distributed throughout the carbon matrix in the hybrid and was quite resistant to extensive agglomeration and sintering, even at temperatures as high as 1000 °C. With increasing carbonization temperature, the Ni component was seen to go through different crystal phases, i.e., Ni3C phase Ni hexagonal close-packed phase Ni face-centered cubic phase. The results of the catalytic tests suggested the former and latter phases to be the most active towards the reduction of 4-NP, with catalytic activity values as high as 0.039 mol4-NP molNi−1 min−1., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades, the Spanish Agencia Estatal de Investigación (AEI) and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013–2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efficient Nickel-Based Catalysts Derived from a Metal-Organic Framework for Nitroarene Reduction

  • Martín Jimeno, Francisco Julián
  • Suárez García, Fabián
  • Paredes Nachón, Juan Ignacio
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) throughout the project MAT2015-69844-R is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efficient cathodic exfoliation of graphite in aqueous electrolytes towards high quality graphene for energy and environmental applications

  • García-Dalí, Sergio
  • Paredes Nachón, Juan Ignacio
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Adawy, Alaa
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
The electrochemical exfoliation of graphite in aqueous medium stands out as an attractive and scalable approach for the production of graphenes for different applications, due to its simplicity, cost-effectiveness and environmental friendliness [1]. In particular, cathodic exfoliation in water should allow access to high quality and non-oxidized graphene flakes, but this possibility has been limited by a poor intercalation ability of aqueous cations [2]. Here, we demonstrate that with a proper choice of starting graphite and electrolyte, high quality graphene flakes can be obtained in substantial yields via cathodic delamination in water., Funding by the Spanish Ministerio de Economia y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovacion y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. S.G-D. and J.M.M. are grateful to MINECO and the Spanish Ministerio de Educacion, Cultura y Deporte (MECD), respectively, for their pre-doctoral contracts (BES/2016 077830 and FPU14/00792, respectively)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical Exfoliation of Graphite in Aqueous Sodium Halide Electrolytes toward Low Oxygen Content Graphene for Energy and Environmental Applications

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Enterría González, Marina
  • Pagán, A
  • Villar Rodil, Silvia
  • Pereira, M F R
  • Martins, J I
  • Figueiredo, J L
  • Cenis, J L
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Graphene and graphene-based materials have shown great promise in many technological applications, but their large-scale production and processing by simple and cost-effective means still constitute significant issues in the path of their widespread implementation. Here, we investigate a straightforward method for the preparation of a ready-to-use and low oxygen content graphene material that is based on electrochemical (anodic) delamination of graphite in aqueous medium with sodium halides as the electrolyte. Contrary to previous conflicting reports on the ability of halide anions to act as efficient exfoliating electrolytes in electrochemical graphene exfoliation, we show that proper choice of both graphite electrode (e.g., graphite foil) and sodium halide concentration readily leads to the generation of large quantities of single-/few-layer graphene nanosheets possessing a degree of oxidation (O/C ratio down to ∼0.06) lower than that typical of anodically exfoliated graphenes obtained with commonly used electrolytes. The halide anions are thought to play a role in mitigating the oxidation of the graphene lattice during exfoliation, which is also discussed and rationalized. The as-exfoliated graphene materials exhibited a three-dimensional morphology that was suitable for their practical use without the need to resort to any kind of postproduction processing. When tested as dye adsorbents, they outperformed many previously reported graphene-based materials (e.g., they adsorbed ∼920 mg g-1 for methyl orange) and were useful sorbents for oils and nonpolar organic solvents. Supercapacitor cells assembled directly from the as-exfoliated products delivered energy and power density values (up to 15.3 Wh kg-1 and 3220 W kg-1, respectively) competitive with those of many other graphene-based devices but with the additional advantage of extreme simplicity of preparation., Financial support from both the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through grant MAT2015-69844-R is gratefully acknowledged. We also acknowledge partial funding by both Plan de Ciencia, Tecnología e Innovación 2013-2017 del Principado de Asturias and the ERDF through Project GRUPIN14-056. This work was also partially funded by project “AIProcMat@N2020 - Advanced Industrial Processes and Materials for a Sustainable Northern Region of Portugal 2020” (NORTE-01-0145-FEDER-000006), supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF) and of Project POCI-01-0145-FEDER-006984 – Associate Laboratory LSRE-LCM funded by ERDF through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI) – and by national funds through FCT - Fundação para a Ciência e a Tecnologia. A.P. thanks her research contract partially supported (80%) by the ERDF/FEDER Operative Programme of the Region of Murcia (Project No. 14-20-01). J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792)., Peer reviewed