Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 60
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional oxides in photonic integrated devices

  • Herranz, Gervasi
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore¿s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community., Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, G. G.
  • Carrera i Vilanova, Miquel
  • Granados, X.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., This work was supported in part by the followings grants: “Science Without Borders” from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq); by the European Agency (EU) through the Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO) Project under Grant EU FP7-2013-ICT-609029, the European Development of Superconducting Tapes (EUROTAPES) Project under Grant EU-FP7 NMP-LA-2012- 280432, the European Consortium for the Development of Fusion Energy (EUROfusion, PPPT-WPMAG 2014), and EU COST ACTIONS MP1201 and MP1014; by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D under Grant SEV-2015-0496, CONSOLIDER Excellence Network under Grant MAT2015- 68994-REDC, COACHSUPENERGY project under Grant MAT2014-56063- C2-1-R, co-financed by the European Regional Development Fund; by the Catalan Government under Grant 2014-SGR-753 and Xarmae.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling the contributions of cerium and iron to the magnetism of Ce-doped yttrium iron garnet

  • Casals, Blai
  • Espínola, Marina
  • Cichelero, Rafael
  • Geprägs, Stephan
  • Opel, Matthias
  • Gross, Rudolf
  • Herranz, Gervasi
  • Fontcuberta, Josep
The remarkable magnetic properties of yttrium iron garnets (YIGs) underpin the use of these materials in a broad scope of spintronic and photonic applications. In particular, the addition of rare earth metals in the structure enhances to a great extent the magneto-optical activity, which is beneficial for the development of nonreciprocal optical devices. Exploiting the wavelength selectivity of magneto-optics, we have identified a range of frequencies at which one can unravel the individual contributions to the magnetism and gyrotropic response arising from cerium and iron. We envision that this outcome may pave the way to further experiments to assess quantitatively the effect on the optical properties of rare earth incorporation into YIG., This work was supported by the Spanish Government by the MAT2011-29269-C03, MAT2014-56063-C2-1-R, and the Severo Ochoa SEV-2015-0496 Projects and the Generalitat de Catalunya (2014 SGR 734 Project). B.C. acknowledges his grant FPI BES-2012-059023 and R.C. acknowledges his fellowship from CNPq - Brazil. S.G., M.O., and R.G. thank T. Brenninger and E. Zamburg for technical support. We also acknowledge the contribution of C. Rubio in preliminary structural and magnetic characterization of thin films as well as Dr. F. Sanchez for scientific guiding and discussions on materials issues., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant Optical Polarization Rotation Induced by Spin-Orbit Coupling in Polarons

  • Casals, Blai
  • Cichelero, Rafael
  • García Fernández, Pablo
  • Junquera, Javier
  • Pesquera, David
  • Campoy Quiles, Mariano
  • Infante, Ingrid C.
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Herranz, Gervasi
We have uncovered a giant gyrotropic magneto-optical response for doped ferromagnetic manganite La2/3Ca1/3MnO3 around the near room-temperature paramagnetic-to-ferromagnetic transition. At odds with current wisdom, where this response is usually assumed to be fundamentally fixed by the electronic band structure, we point to the presence of small polarons as the driving force for this unexpected phenomenon. We explain the observed properties by the intricate interplay of mobility, Jahn-Teller effect and spin-orbit coupling of small polarons. As magnetic polarons are ubiquitously inherent to many strongly correlated systems, our results provide an original, general pathway towards the generation of magnetic-responsive gigantic gyrotropic responses that may open novel avenues for magnetoelectric coupling beyond the conventional modulation of magnetization., This work was supported by the Spanish Government through Projects No. MAT2014-56063-C2-1-R, No. FIS2012-37549-C05-04, No. FIS2015-64886-C5-2- P, No. MAT2012-37776, and the Severo Ochoa SEV-2015-0496 grant and the Generalitat de Catalunya (2014 SGR 734 project). B. C. acknowledges Grant No. FPI BES- 2012-059023, R. C. acknowledges support from CNPq— Brazil, and P. G. F. recognizes support from Ramón and Cajal Grant No. RYC-2013-12515., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Untangling Electrostatic and Strain Effects on the Polarization of Ferroelectric Superlattices

  • Khestanova, Ekaterina
  • Dix, Nico
  • Fina, Ignasi
  • Scigaj, Mateusz
  • Rebled, José Manuel
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Khestanova, Ekaterina et al., The polarization of ferroelectric superlattices is determined by both electrical boundary conditions at the ferroelectric/paraelectric interfaces and lattice strain. The combined infl uence of both factors offers new opportunities to tune ferroelectricity. However, the experimental investigation of their individual impact has been elusive because of their complex interplay. Here, a simple growth strategy has permitted to disentangle both contributions by an independent control of strain in symmetric superlattices. It is found that fully strained short-period superlattices display a large polarization whereas a pronounced reduction is observed for longer multilayer periods. This observation indicates that the electrostatic boundary mainly governs the ferroelectric properties of the multilayers whereas the effects of strain are relatively minor., Financial support by the Spanish Government [Projects MAT2014- 56063-C2-1-R and MAT2013-41506 ] and Generalitat de Catalunya ( 2014-SGR-734 and 2014-SGR-672 ) is acknowledged. ICMAB-CSIC authors acknowledge fi nancial support from the Spanish Ministry of Economy and Competitiveness , through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496 ). I.F. acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014- 19102) from the Spanish Ministry of Economy and Competitiveness. The transmission electron microscopy works were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragón (Universidad de Zaragoza). The authors acknowledge the LMA-INA for offering access to their instruments and expertise. The authors thank Massimiliano Stengel for useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monolithic integration of roomtemperature multifunctional BaTiO3-CoFe2O4 epitaxial heterostructures on Si(001)

  • Scigaj, Mateusz
  • Dix, Nico
  • Gázquez, Jaume
  • Varela, María
  • Fina, Ignasi
  • Domingo, Neus
  • Herranz, Gervasi
  • Skumryev, Vassil
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe2O4/BaTiO3 bilayers are integrated with Si(001) using LaNiO3/CeO2/YSZ as a tri-layer buffer. They present structural and functional properties close to those achieved on perovskite substrates: the bilayers are fully epitaxial with extremely flat surface, and exhibit robust ferromagnetism and ferroelectricity at room temperature., Financial support by the Spanish Government (projects MAT2014-56063-C2-1-R and FIS2013-48668-C2-1-P) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). IF acknowledges Beatriu de Pinós postdoctoral scholarship (2011 BP-A 00220 and 2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya and Juan de la Cierva - Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. MS acknowledges the FPU grant and JG acknowledges RyC contract (2012–11709) from the Spanish Government. Electron microscopy observations carried out at the ICTS-CNME at UCM. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. Research at UCM was sponsored by Spanish MINECO MAT2015-66888-C3-3-R and Fundación BBVA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High ferroelectric polarization in c-oriented BaTiO3 epitaxial thin films on SrTiO3/Si(001)

  • Scigaj, Mateusz
  • Chao, C.H.
  • Gázquez, Jaume
  • Fina, Ignasi
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Scigaj, M. et al., The integration of epitaxial BaTiO3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO3/LaNiO3/SrTiO3 heterostructure is grown monolithically on Si(001). The BaTiO3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm2. This result paves the way towards the fabrication of lead-free BaTiO3 ferroelectric memories on silicon platforms., ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, and from Generalitat de Catalunya (2014 SGR 734). Work at Oak Ridge National Laboratory was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Materials Sciences and Engineering Division. C. H. Chao acknowledges the NSC-CSIC 2014 Summer Program in Spain for Taiwanese PhD students. I. Fina acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. INL gratefully acknowledges the European commission and the national French research agency (ANR) for funding, through the projects SITOGA (FP7-ICT-2013-11-619456), TIPS (H2020‐ICT‐02-2014‐1-644453), ANR HIRIS and ANR DIAMWAFEL. INL also acknowledges P. Regreny, C. Botella and J.-B. Goure for MBE technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Driven Orbital and Magnetic Orders and Phase Separation in Epitaxial Half-Doped Manganite Films for Tunneling Devices

  • Pesquera, David
  • Gutiérrez Yatacue, Diego F.
  • Radaelli, Greta
  • Herranz, Gervasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Mixed-valence manganites La1−xAxMnO3 (A=Sr, Ca) with x≈0.5 can be driven from a ferromagnetic-metallic to an antiferromagnetic-insulating state by a small modification (Δx) of the carrier density (Δx/x<1). For this reason, these oxides have received renewed attention due to their potentially advantageous integration in ferroelectric tunnel junctions of adjustable tunnel barrier width. Interestingly, in thin films, epitaxial strain can modify the electronic and magnetic ground state strongly affecting their magnetotransport properties. Here we exploit the extreme sensitivity of linearly and circularly polarized x-ray absorption to orbital anisotropy and magnetic ordering to explore the role of structural distortions and electronic bandwidth on the orbital occupancy and spin ordering of Mn 3d states in La0.5A0.5MnO3 films under various strain states. Mn55 NMR experiments are used to get information about the electronic and magnetic phase separation and orbital ordering occurring in these films. These results combined with the corresponding structural, magnetic, and electrical characterization allow us to map the strain-dependent orbital and magnetic phase diagrams of half-doped manganites and its dependence on the electronic bandwidth., This work is supported by the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2014-56063-C2-1-R project, the Generalitat de Catalunya (2014 SGR 734), the Italian government (MIUR-Progetto Premiale “Materiali e disposivi magnetici e superconduttivi per sensoristica e ICT”), the National Sciences Centre of Poland (Grant No. DEC 2011/03/B/ST3/02368), and the EU Seventh Framework Program [Grant No. REGPOT-CT- 2013–316014 (EAgLE)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin Hall Magnetoresistance as a Probe for Surface Magnetization in Pt=CoFe2O4 Bilayers

  • Isasa, Miren
  • Vélez, Saül
  • Sagasta, Edurne
  • Bedoya-Pinto, Amilcar
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Hueso, Luis E.
  • Fontcuberta, Josep
  • Casanova, Félix
We study the spin Hall magnetoresistance (SMR) in Pt grown in situ on CoFe2O4 (CFO) ferrimagnetic insulating films. A careful analysis of the angle-dependent and field-dependent longitudinal magnetoresistance indicates that the SMR contains a contribution that does not follow the bulk magnetization of CFO, but it is a fingerprint of the complex magnetism at the surface of the CFO layer, thus signaling SMR as a tool for mapping surface magnetization. A systematic study of the SMR for different temperatures and CFO thicknesses gives us information impossible to obtain with any standard magnetometry technique. On one hand, the surface magnetization behaves independently of the CFO thickness and does not saturate up to high fields, evidencing that the surface has its own anisotropy. On the other hand, characteristic zero-field magnetization steps are not present at the surface while they are relevant in the bulk, strongly suggesting that antiphase boundaries are responsible for such intriguing features. In addition, a contribution from the ordinary magnetoresistance of Pt is identified, which is distinguishable only due to the low resistivity of the in situ grown Pt., This work is supported by the European Union under the NMP project (263104-HINTS) and the European Research Council (257654-SPINTROS), by the Spanish MINECO (MAT2012-37638, MAT2015-65159-R, MAT2014-56063- C2-1R, and SEV-2015-0496), by the Basque Government (PC2015-1-01), and by the Catalan Government (2014 SGR 734). M. I. and E. S. acknowledge the Basque Government and the Spanish MECD, respectively, for a Ph.D. fellowship (BFI-2011-106 and FPU14/03102). J. F. acknowledges stimulating discussions with Xavier Martí., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling epitaxial growth mechanisms of solution derived functional oxide thin films

  • Queraltó, Albert
  • Mata, Maria de la
  • Arbiol, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (Ce0.9Zr0.1O2−y, LaNiO3, and Ba0.8Sr0.2TiO3) grown on single crystal substrates (Y2O3:ZrO2, LaAlO3, and SrTiO3) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-56063-C2-1-R, co-financed by the European Regional Development Fund), and the projects MAT2011-28874-C02-01, ENE2014-56109-C3-3-R and Consolider Nanoselect (CSD2007-00041), and from the Catalan Government (2014-SGR-753 and Xarmae). AQ and MdlM are also grateful for JAE-Predoc fellowship from CSIC (E-08-2012-1321248 and E-08-2013-1028356, co-financed by the European Social Fund)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling and controlling hidden imprint fields in ferroelectric capacitors

  • Fanmao, Liu
  • Fina, Ignasi
  • Bertacco, Riccardo
  • Fontcuberta, Josep
Ferroelectric materials have a spontaneous polarization that can point along energetically equivalent, opposite directions. However, when ferroelectric layers are sandwiched between different metallic electrodes, asymmetric electrostatic boundary conditions may induce the appearance of an electric field (imprint field, E imp) that breaks the degeneracy of the polarization directions, favouring one of them. This has dramatic consequences on functionality of ferroelectric-based devices such as ferroelectric memories or photodetectors. Therefore, to cancel out the E imp, ferroelectric components are commonly built using symmetric contact configuration. Indeed, in this symmetric contact configuration, when measurements are done under time-varying electric fields of relatively low frequency, an archetypical symmetric single-step switching process is observed, indicating E imp ∼ 0. However, we report here on the discovery that when measurements are performed at high frequency, a well-defined double-step switching is observed, indicating the presence of E imp. We argue that this frequency dependence originates from short-living head-to-head or tail-to-tail ferroelectric capacitors in the device. We demonstrate that we can modulate E imp and the life-time of head-to-head or tail-to-tail polarization configurations by adjusting the polarization screening charges by suitable illumination. These findings are of relevance to understand the effects of internal electric fields on pivotal ferroelectric properties, such as memory retention and photoresponse., This work is supported by the Spanish Government (MAT2014-56063-C2-1-R) and by the Catalan Government (2014 SGR 734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496). Ignasi Fina acknowledges the Beatriu de Pinós postdoctoral scholarship (2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya. Fanmao Liu is financially supported by China Scholarship Council (CSC) with No. 201306020016. We are thankful to F. Sánchez, and M. Cantoni, for growing the films and making the preliminary characterization of the films, and to M. Stengel for inspiring discussions., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of magnetic proximity effects in magnetoresistive Pt/CoFe2O4 hybrid interfaces

  • Valvidares, Manuel
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Valvidares, Manuel et al., Ultrathin Pt films grown on insulating ferrimagnetic CoFe2O4 (111) epitaxial films display a magnetoresistance upon rotating the magnetization of the magnetic layer. We report here x-ray magnetic circular dichroism (XMCD) recorded at Pt-L2,3 and Pt-M3 edges. The results indicate that the Pt magnetic moment, if any, is below the detection limit (<0.001μB/Pt), thus strongly favoring the view that the presence of CoFe2O4 does not induce the formation of magnetic moments in Pt. Therefore, the observed magnetoresistance cannot be attributed to some sort of proximity-induced magnetic moments at Pt ions and subsequent magnetic-field dependent scattering. It thus follows that either bulk (spin Hall and inverse spin Hall effects) or interface (Rashba) spin-orbit related effects dominate the observed magnetoresistance. Furthermore, comparison of bulk magnetization and XMCD data at (Fe,Co)-L2,3 edges suggests the presence of some spin disorder in the CoFe2O4 layer which may be relevant for the observed anomalous nonsaturating field dependence of spin Hall magnetoresistance., This work is supported by the European Union under the NMP project (263104-HINTS) and the European Research Council (257654-SPINTROS). The financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the projects (MAT2012-37638, MAT2014-56063-C2-1-R, FIS2013-45469-C4-3-R, MAT2014-59315-R and MAT2015-65159-R) and by the Catalan Government (2014 SGR 734) are acknowledged. M. I. acknowledges the Basque Government for a PhD fellowship (BFI-2011-106). Beam time access at ESRF and ALBA facilities, at beamlines ID12 and BL29 respectively, is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiple strain-induced phase transitions in LaNiO3 thin films

  • Weber, M.C.
  • Dix, Nico
  • Pesquera, David
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Íñiguez, Jorge
  • Kreisel, J.
Weber, M.C. et al., Strain effects on epitaxial thin films of LaNiO3 grown on different single crystalline substrates are studied by Raman scattering and first-principles simulation. New Raman modes, not present in bulk or fully-relaxed films, appear under both compressive and tensile strains, indicating symmetry reductions. Interestingly, the Raman spectra and the underlying crystal symmetry for tensile and compressively strained films are different. Extensive mapping of LaNiO3 phase stability is addressed by simulations, showing that a variety of crystalline phases are indeed stabilized under strain which may impact the electronic orbital hierarchy. The calculated Raman frequencies reproduce the principal features of the experimental spectra, supporting the validity of the multiple strain-driven structural transitions predicted by the simulations., J.K., M.W., M.G., and J.I. acknowledge support from the National Research Fund, Luxembourg through a Pearl grant (Grant No. FNR/P12/4853155). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496) and the MAT2014-56063-C2-1-R and MAT2013- 40581-P projects, and from Generalitat de Catalunya (2014 SGR 734). UB authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, project MAT2013-41506-P and from Generalitat de Catalunya (2014 SGR 672)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Controlled Responsiveness of Slave Half-Doped Manganite La0.5Sr0.5MnO3 Layers Inserted in BaTiO3 Ferroelectric Tunnel Junctions

  • Radaelli, Greta
  • Gutiérrez Yatacue, Diego F.
  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Baldrati, Lorenzo
  • Heidler, Jakoba
  • Piamonteze, Cinthia
  • Bertacco, Riccardo
  • Fontcuberta, Josep
Insertion of layers displaying field-induced metal-to-insulator (M/I) transition in ferroelectric tunnel junctions (FTJs) has received attention as a potentially useful way to enlarge junction tunnel electroresistance (TER). Half-doped manganites being at the verge of metal-insulator character are thus good candidates to be slave layers in FTJs. However, the phase diagram of these oxides is extremely sensitive to strain and thus can be radically different when integrated in epitaxial FTJs. Here we report a systematic study of large-area (A = 4 to 100 m2) Pt/La0.5Sr0.5MnO3/BaTiO3/La0.7Sr0.3MnO3 (Pt/HD/BTO/LSMO) FTJs, having different thicknesses of the ferroelectric (2-3nm) and HD layers (1-2nm), grown on substrates imposing either tensile (SrTiO3) or compressive (LaAlO3) strains. Room-temperature electric characterization of the FTJs shows polarization-controlled ON/ OFF states. Clear evidences of field-induced M/I transition (difference between junction resistance in OFF and ON state is increased of more than one order of magnitude) are observed in junctions prepared on SrTiO3 but the HD layer is generally metallic on LaAlO3. Moreover, the M/I transition is only confined in an interfacial layer of the slave film thus entailing an overall reduction of TER. The orderly results reported here give some hints towards selection of HD materials and substrates for optimal FTJ responsiveness., This work has been partially supported by grants from the Spanish Government (MAT2014-56063-C2-1R, MAT2015-73839-JIN and SEV-2015-0496), by the Catalan Government (2014 SGR 734) and by Fondazione Cariplo via the project MAGISTER (grant n. 2013-0726). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 2016 oxide electronic materials and oxide interfaces roadmap

  • Lorenz, M.
  • Fontcuberta, Josep
  • Pryds, N.
Lorenz, M. et al., Oxide electronic materials provide a plethora of possible applications and offer ample opportunity for scientists to probe into some of the exciting and intriguing phenomena exhibited by oxide systems and oxide interfaces. In addition to the already diverse spectrum of properties, the nanoscale form of oxides provides a new dimension of hitherto unknown phenomena due to the increased surface-to-volume ratio. Oxide electronic materials are becoming increasingly important in a wide range of applications including transparent electronics, optoelectronics, magnetoelectronics, photonics, spintronics, thermoelectrics, piezoelectrics, power harvesting, hydrogen storage and environmental waste management. Synthesis and fabrication of these materials, as well as processing into particular device structures to suit a specific application is still a challenge. Further, characterization of these materials to understand the tunability of their properties and the novel properties that evolve due to their nanostructured nature is another facet of the challenge. The research related to the oxide electronic field is at an impressionable stage, and this has motivated us to contribute with a roadmap on ‘oxide electronic materials and oxide interfaces’. This roadmap envisages the potential applications of oxide materials in cutting edge technologies and focuses on the necessary advances required to implement these materials, including both conventional and novel techniques for the synthesis, characterization, processing and fabrication of nanostructured oxides and oxide-based devices. The contents of this roadmap will highlight the functional and correlated properties of oxides in bulk, nano, thin film, multilayer and heterostructure forms, as well as the theoretical considerations behind both present and future applications in many technologically important areas as pointed out by Venkatesan. The contributions in this roadmap span several thematic groups which are represented by the following authors: novel field effect transistors and bipolar devices by Fortunato, Grundmann, Boschker, Rao, and Rogers; energy conversion and saving by Zaban, Weidenkaff, and Murakami; new opportunities of photonics by Fompeyrine, and Zuniga-Perez; multiferroic materials including novel phenomena by Ramesh, Spaldin, Mertig, Lorenz, Srinivasan, and Prellier; and concepts for topological oxide electronics by Kawasaki, Pentcheva, and Gegenwart. Finally, Miletto Granozio presents the European action ‘towards oxide-based electronics’ which develops an oxide electronics roadmap with emphasis on future nonvolatile memories and the required technologies. In summary, we do hope that this oxide roadmap appears as an interesting up-to-date snapshot on one of the most exciting and active areas of solid state physics, materials science, and chemistry, which even after many years of very successful development shows in short intervals novel insights and achievements., This work has been partially supported by the TO-BE COST action MP1308. J F acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496) and MAT2014-56063-C2-1R, and from the Catalan Government (2014 SGR 734). F.M.G. acknowledges support from MIUR through the PRIN 2010 Project ‘OXIDE’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Shortening of MWNT-SPION Hybrids by Steam Treatment Improves Their Magnetic Resonance Imaging Properties In Vitro and In Vivo

  • Cabana, Laura
  • Fontcuberta, Josep
  • Tobias, Gerard
Cabana, Laura et al., Carbon nanotubes (CNTs) have been advocated as promising nanocarriers in the biomedical field. Their high surface area and needle-like shape make these systems especially attractive for diagnostic and therapeutic applications. Biocompatibility, cell internalization, biodistribution, and pharmacokinetic profile have all been reported to be length dependent. In this study, further insights are gotten on the role that the length of CNTs plays when developing novel contrast agents for magnetic resonance imaging (MRI). Two samples of CNTs with different length distribution have been decorated with radio-labeled iron oxide nanoparticles. Despite characterization of the prepared hybrids reveals a similar degree of loading and size of the nanoparticles for both samples, the use of short CNTs is found to enhance the MRI properties of the developed contrast agents both in vitro and in vivo compared to their long counterparts. Keywords, L.C. and M.B. contributed equally to this work. The authors are grateful to Thomas Swan Co. & Ltd for supplying the Elicarb MWNT samples. L.C. acknowledges a CSIC JAE Predoc Fellowship. M.B. is a Marie Curie Fellow. Funding from FP7-ITN Marie-Curie Network programme RADDEL (290023), Biotechnology and Biological Sciences Research Council (BB/J008656/1), Worldwide Cancer Research (12-1054), and Spanish Ministry of Economy and Competitiveness (MAT2014-53500-R and MAT2014-56063-C2-1R) is acknowledged. R.T.M.D. acknowledges funding by The Centre of Excellence in Medical Engineering funded by the Wellcome Trust and EPSRC under Grant No. WT 088641/Z/09/Z. L.C., J.F., and G.T./ ICMAB acknowledge fi nancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). K.T.A., G.T, and R.T.M.D. thank the members of the EU COST actions TD1004 (Theranostics Imaging and Therapy: An Action to Develop Novel Nanosized Systems for Imaging-Guided Drug Delivery) and TD1007 (Bimodal PET-MRI molecular imaging technologies and applications for in vivo monitoring of disease and biological processes) for useful discussions. The XPS data were acquired at the Laboratorio de Microscopías Avanzadas (LMA) – Instituto de Nanociencia de Aragón (INA) (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of a minority monoclinic LaNiO2.5 phase in lanthanum nickelate thin films

  • López-Conesa, L.
  • Rebled, José Manuel
  • Pesquera, David
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Fontcuberta, Josep
  • Peiró, Francesca
López-Conesa, L. et al., LaNiO3 (LNO) thin films of 14 nm and 35 nm thicknesses grown epitaxially on LaAlO3 (LAO) and (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) substrates are studied by High Resolution Transmission Electron Microscopy (HRTEM) and (High Angle Annular Dark Field (HAADF) imaging. The strain state of the films is studied by Geometric Phase Analysis (GPA). Results show the successful in-plane adaptation of the films to the substrates, both in the compressive (LAO) and tensile (LSAT) cases. Through the systematic analysis of HRTEM superstructure contrast modulation along different crystal orientations, localized regions of the monoclinic LaNiO2.5 phase are detected in the 35 nm films., LLC, JMR, SE and FP acknowledge financial support by the Spanish Government (projects MAT2013-41506 and CSD2009-2013). ICMAB activity has been sponsored by the Spanish MINECO (Project:MAT2014-56063-C02) and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)), and by Generalitat de Catalunya (2014 SGR 00734). TEM facilities at CCiT-UB, CEMES-CNRS and LMA-INA are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simulation of STEM-HAADF Image Contrast of Ruddlesden–Popper Faulted LaNiO3 Thin Films

  • Coll, Catalina
  • López Conesa, Lluís
  • Rebled, José Manuel
  • Magén, César
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Estradé, Sònia
  • Peiró, Francesca
LaNiO3 (LNO) thin films are widely used as electrode materials. Yet, their properties greatly depend on such parameters as strain state and defect density. In this work we present a detailed structural characterization of epitaxial LNO thin films grown on LaAlO3(001). Based on scanning transmission electron microscope - high-angle annular dark-field imaging (STEM-HAADF) contrast analysis and image simulations, Ruddlesden-Popper faulted configurations, with 1/2a<111> relative displacement of defect free perovskite blocks, are atomically modeled and simulated to disentangle the variation of Z-contrast in the experimental images., Financial support by the Spanish Government (Projects MAT2013-41506-P, MAT2016-79455-P, and MAT2014- 56063-C2-1-R) and Generalitat de Catalunya (2014-SGR-734 and 2014-SGR-672) is acknowledged. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Infrared ellipsometry study of photogenerated charge carriers at the (001) and (110) surfaces of SrTiO3 crystals and at the interface of the corresponding LaAlO3/SrTiO3 heterostructures

  • Yazdi-Rizi, M.
  • Marsik, P.
  • Mallett, B. P. P.
  • Sen, K.
  • Cerreta, A.
  • Dubroka, A.
  • Scigaj, Mateusz
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Bernhard, C.
2-DIMENSIONAL ELECTRON-GAS; STRONTIUM-TITANATE; PERSISTENT PHOTOCONDUCTIVITY; DOMAIN-STRUCTURE; MOBILITY; TEMPERATURE; TRANSITION; FILMS; GAMMA-AL2O3/SRTIO3; FERROELECTRICITY, The work at the University of Fribourg was supported by the Schweizerische Nationalfonds (SNF) through Grant No. 200020-153660. B.P.P.M. wishes to acknowledge support from the Marsden Fund of New Zealand. The work at MUNI was financially supported by the Ministry of education youth and sports of the Czech Republic, under the project CEITEC 2020 (LQ1601). M.S., F.S., and G.H. acknowledge the support by the Spanish Government through Project No. MAT2014-56063-C2-1-R, the Severo Ochoa Grant No. SEV-2015-0496, and the Generalitat de Catalunya (Project No. 2014SGR 734). J. Mannhart is acknowledged for providing the LAO/STO (001) sample and J. Foncuberta for scientific discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Volume Resistive Switching in metallic perovskite oxides driven by the Metal-Insulator Transition

  • Gonzalez Rosillo, Juan Carlos
  • Ortega Hernandez, Rafael
  • Jareño Cerulla, Julia
  • Miranda, Enrique
  • Suñé, Jordi
  • Granados, Xavier
  • Obradors, Xavier
  • Palau, Anna
  • Puig Molina, Teresa
In recent years Resistive Random Access Memory (RRAM) is emerging as the most promising candidate to substitute the present Flash Technology in the non-volatile memory market. RRAM are based on the Resistive Switching (RS) effect, where a change in the resistance of the material can be reversibly induced upon the application of an electric field. In this sense, strongly correlated complex oxides present unique intrinsic properties and extreme sensitivity to external perturbations, which make them suitable for the nanoelectronics of the future. In particular, metallic complex oxides displaying metal-insulator transition (MIT) are very attractive materials for applications and are barely explored as RS active elements. In this work, we analyze the RS behavior of three different families of metallic perovskites: La0.8Sr0.2MnO3, YBa2Cu3O7-δ and NdNiO3. We demonstrate that these mixed electronic-ionic conductors undergo a metal-insulator transition upon the application of an electric field, being able to transform the bulk volume. This volume RS is different in nature from interfacial or filamentary type and opens new possibilities of robust device design. As an example, we present a proof-of-principle result from a 3-Terminal configuration with multilevel memory states., We acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC), COACHSUPENERGY project (MAT2014-56063-C2-1-R, co-financed by the European Regional Development Fund), OXSWITCH project funded by Centro Superior de Investigaciones Científicas (CSIC) and from the Catalan Government with 2014-SGR-753 and Xarmae. We also acknowledge Dr. Jaume Gazquez and Mr. Bernat Munder for the TEM images. J.C.G.R. thanks Spanish Ministry of Economy for his FPI Spanish grant (BES-2012-053814). R.O. thanks Generalitat de Catalunya for the Grant through AGAUR FI-DGR program. JS acknowledges the support of the Generalitat de Catalunya under the ICREA ACADEMIA award., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electric-Field-Adjustable Time-Dependent Magnetoelectric Response in Martensitic FeRh Alloy

  • Fina, Ignasi
  • Quintana, Alberto
  • Padilla-Pantoja, Jessica
  • Martí, Xavier
  • Macià, Ferran
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Fontcuberta, Josep
  • Sort, Jordi
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic−ferromagnetic phases in FeRh, unbalanced by voltagecontrolled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015- 73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, MAT2015-64110-C2-2-P, and associated FEDER], the Generalitat de Catalunya (2014-SGR-734, 2014-SGR-1015) and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from the EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. Jose Santiso and Jose Manuel Caicedo Roque from Institut Català de Nanociència i Nanotecnologia are acknowledged for valuable collaboration on time-dependent X-ray characterization. We also acknowledge Max Stengel and Umesh Bhaskar for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidden Magnetic States Emergent Under Electric Field, In A Room Temperature Composite Magnetoelectric Multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi
  • Frontera, Carlos
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Ramesh, Ramamoorthy
Clarkson, J. D. et al., The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to “hide” or “reveal” a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic – ferromagnetic interactions for spintronics., Te work at Berkeley was supported in part by FAME, one of six centers of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA was supported by the SRC-FAME program. Financial support by the Spanish Government (Project MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2017- 85232-R and associated FEDER) and Generalitat de Catalunya (2014 SGR 734) is acknowledged. ICMAB-CSIC authors acknowledge fnancial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness of Spanish Government. XMCD-PEEM experiments were performed at CIRCE beamline at ALBA Synchrotron with the acknowledged collaboration of ALBA staf. Partial fnancial support from the 2014-Consolidator Grant "SPIN-PORICS" (Grant Agreement nº 648454) from the European Research Council is acknowledged. XM acknowledges support from the Grant Agency of the Czech Republic Grant no. 14-37427. Work at ORNL was sponsored by the Laboratory Directed Research and Development (LDRD) Programs of ORNL managed by UT-Battelle, LLC. Work at CSUN was supported by NSF under Grant No. 1205734, NSF Partnerships for Research and Education in Materials (PREM), and by NSF under Grant No. 1160504 NSF Nanosystems Engineering Research Center for Translational Applications of Nanoscale Multiferroic Systems (TANMS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring Lattice Strain and Ferroelectric Polarization of Epitaxial BaTiO3 Thin Films on Si(001)

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 °C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The developed strategy overcomes the main limitations of the conventional strain engineering methodologies based on substrate selection: it can be applied to films on specific substrates including Si(001) and perovskites, and it is not restricted to ultrathin films., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R, MAT2014-56063- C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. IF acknowledges Juan de la Cierva – Incorporación postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proposal of a Novel Design for Linear Superconducting Motor Using 2G Tape Stacks

  • Gonçalves Sotelo, Ghilherme
  • Sass, Felipe
  • Carrera, Miquel
  • López López, Josep
  • Granados, Xavier
This manuscript presents a new design for superconducting linear motor (SLM). This SLM uses stacks of second generation (2G) superconducting tapes, which are responsible for replacing YBCO bulks. The proposed SLM may operate as a synchronous motor or as a hysteresis motor, depending on the load force magnitude. A small scale linear machine prototype with 2G stacks was constructed and tested to investigate the proposed SLM topology. The stator traveling magnetic field wave was represented by several Nd-Fe-B permanent magnets. A relative movement was produced between the stator and the stack, and the force was measured along the displacement. This system was also simulated by finite element method, in order to calculate the induced currents in the stack and determine the electromagnetic force. The H-formulation was used to solve the problem and a power law relation was applied to take into account the intrinsically nonlinearity of the superconductor. The simulated and measured results were in accordance. Simulated results were extrapolated, proving to be an interesting tool to scale up the motor in future projects. The proposed motor presented an estimated force density of almost 500 N/kg, which is much higher than any linear motor., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the: European Union agencies for the FORTISSIMO project FP7-2013-ICT-609029, EUROTAPES project FP7-NMP-Large-2011-280432, Eurofusion project PPPT-WPMAG 2014, and EU COST ACTIONS MP1201 and MP1014; Spanish Government agencies for Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R; Catalan Government for 2014-SGR-753., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of Polar Orientation and Lattice Strain in Epitaxial BaTiO3 Films on Silicon

  • Lyu, Jike
  • Estandía, Saúl
  • Gázquez, Jaume
  • Chisholm, Matthew F.
  • Fina, Ignasi
  • Dix, Nico
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Conventional strain engineering of epitaxial ferroelectric oxide thin films is based on the selection of substrates with suitable lattice parameter. Here we show that the variation of oxygen pressure during pulsed laser deposition is a flexible strain engineering method for epitaxial ferroelectric BaTiO3 films either on perovskite substrates or on Si(001) wafers. This unconventional growth strategy permits continuous tuning of strain up to high levels (ε>0.8%) in films of thickness exceeding of a hundred of nanometers, as well as selecting the polar axis orientation to be either parallel or perpendicular to the substrate surface plane., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2014 SGR 734) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. J.G. acknowledges the RyC contract (RC-2012–11709). Electron microscopy observations at ORNL were supported by the U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division. Authors acknowledge the ICTS-CNME for offering access to their instruments and expertise. S.E. acknowledges the Spanish Ministry of Economy and Competitiveness for his PhD contract (SEV-2015-0496-16-3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selectable texture in epitaxial ferroelectric BaTiO3 films integrated with silicon

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric BaTiO3 films have been epitaxially grown by pulsed laser deposition on buffered Si substrates. We show that BaTiO3 films texture is selectable by appropriate choice of Si wafer orientation and buffer layers. BaTiO3 films having (00l), (l0l) or (l0l)/(l00) texture present very flat surface, low current leakage, and sizeable ferroelectric polarization. The films, integrated on silicon platforms, offer opportunities to exploit anisotropic optic and dielectric properties of ferroelectric BaTiO3., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. JL is financially supported by China Scholarship Council (CSC) with No. 201506080019. JL work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the Polarization of Ferroelectric Capacitors by the Concurrent Action of Light and Adsorbates

  • Fanmao, Liu
  • Fina, Ignasi
  • Sauthier, Guillaume
  • Sánchez Barrera, Florencio
  • Rappe, Andrew M.
  • Fontcuberta, Josep
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/ electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO3 thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening H2O-derived adsorbates at the buried metal−ferroelectric Pt/BaTiO3 interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity, This work is supported by the Spanish government (MAT2014-56063-C2-1-R, MAT2017-85232-R (AEI/FEDER,UE), and MAT2015-73839-JIN and associated FEDER) and by the Catalan government (2017 SGR 1377). ICMABCSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). I.F. acknowledges Juan de la Cierva Incorporació n postdoctoral fellowship (IJCI-2014-19102) from the Spanish Ministry of Economy and Competitiveness. F.L. is financially supported by China Scholarship Council (CSC) with no. 201306020016. A.M.R. acknowledges support from the Office of Naval Research under grant N00014-17-1- 2574. The ICN2 is funded by the CERCA programme/ Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxial Integration on Si(001) of Ferroelectric Hf0.5Zr0.5O2 Capacitors with High Retention and Endurance

  • Lyu, Jike
  • Fina, Ignasi
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Epitaxial ferroelectric Hf0.5Zr0.5O2 films have been successfully integrated in a capacitor heterostructure on Si(001). The orthorhombic Hf0.5Zr0.5O2 phase, [111] out-of-plane oriented, is stabilized in the films. The films present high remnant polarization Pr close to 20 μC/cm2, rivaling with equivalent epitaxial films on single crystalline oxide substrates. Retention time is longer than 10 years for a writing field of around 5 MV/cm, and the capacitors show endurance up to 109 cycles for a writing voltage of around 4 MV/cm. It is found that the formation of the orthorhombic ferroelectric phase depends critically on the bottom electrode, being achieved on La0.67Sr0.33MnO3 but not on LaNiO3. The demonstration of excellent ferroelectric properties in epitaxial films of Hf0.5Zr0.5O2 on Si(001) is relevant toward fabrication of devices that require homogeneity in the nanometer scale, as well as for better understanding of the intrinsic properties of this promising ferroelectric oxide., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. J.L. is financially supported by China Scholarship Council (CSC) with No. 201506080019. J.L. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth Window of Ferroelectric Epitaxial Hf0.5Zr0.5O2 Thin Films

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
The metastable orthorhombic phase of hafnia is generally obtained in polycrystalline films, whereas in epitaxial films, its formation has been much less investigated. We have grown Hf0.5Zr0.5O2 films by pulsed laser deposition, and the growth window (temperature and oxygen pressure during deposition and film thickness) for epitaxial stabilization of the ferroelectric phase is mapped. The remnant ferroelectric polarization, up to ∼24 μC/cm2, depends on the amount of orthorhombic phase and interplanar spacing and increases with temperature and pressure for a fixed film thickness. The leakage current decreases with an increase in thickness or temperature, or when decreasing oxygen pressure. The coercive electric field (EC) depends on thickness (t) according to the EC – t–2/3 scaling, which is observed for the first time in ferroelectric hafnia, and the scaling extends to thicknesses down to around 5 nm. The proven ability to tailor the functional properties of high-quality epitaxial ferroelectric Hf0.5Zr0.5O2 films paves the way toward understanding their ferroelectric properties and prototyping devices., Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER, EU), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramón y Cajal Contract RYC-2017-22531. J.L. is financially supported by the China Scholarship Council (CSC, 201506080019). The work of J.L. has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conical magnetic structures in multiferroic SrScxFe12−xO19 hexaferrites derived from powder neutron diffraction

  • Qureshi, Navid
  • Ruiz-Martín, M. D.
  • Puente-Orench, Inés
  • Fernández-Díaz, M. T.
  • Balbashov, A. M.
  • Ivanov, V. Yu.
  • Skumryev, V.
  • Mukhin, A. A.
We present a systematic powder neutron diffraction study on Sr-based M-type hexaferrites SrScxFe12−xO19 using high-resolution and high-flux instruments. We have derived the magnetic configurations for the compounds with x=1.4, 1.6, and 1.8 at room temperature and at 2 K revealing a ferrimagnetic structure and a complex conical magnetic structure, respectively, where the latter is decomposed into the axial ferrimagnetic and the helicoidally modulated component in the hexagonal a−b plane. Our temperature- and composition-dependent investigation reveals that doping nonmagnetic Sc into this system reinforces the frustration and pushes the transition between the two ordered phases toward higher temperatures. The continuous opening of the spin cone suggests a smooth transition from an easy-axis toward an easy-plane anisotropy with decreasing temperature, which can be reinforced by increasing Sc content., This paper was supported by the Russian Scientific Foundation (Project No. 16-12-10531). Financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through Projects No. MAT2014-56063-C2-1-R and No. MAT2017-85232-R (AEI/FEDER, EU), is acknowledged. We acknowledge ILL and D1B-CRG Ministerio de Economía y Competitividad (MINECO) for beam time allocation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Asymmetric Resistive Switching Dynamics in BaTiO3 Tunnel Junctions

  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The resistive switching associated with polarization reversal is studied in detail in ferroelectric BaTiO3 tunnel junctions, with focus on the dynamics of the ferroelectric domain switching. It is observed that the transition between the high‐resistance state (HRS) and the low‐resistance state (LRS) is largely asymmetric being smooth from LRS to HRS, but proceeds via avalanches in the HRS‐to‐LRS transitions. It is shown that this distinct behavior is related to the presence of an imprint field in the junction and has important consequences on the junction's performance., Financial support from the Spanish Government, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R, MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) was acknowledged. M.Q. was financially supported by China Scholarship Council (CSC) with Grant No. 201406890019. M.Q. work was done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. I.F. acknowledges Ramon y Cajal contract RYC‐2017‐22531. The authors thank Dr. Neus Domingo for the use of PFM equipment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complementary Resistive Switching Using Metal–Ferroelectric–Metal Tunnel Junctions

  • Mengdi, Qian
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Complementary resistive switching (CRS) devices are receiving attention because they can potentially solve the current‐sneak and current‐leakage problems of memory arrays based on resistive switching (RS) elements. It is shown here that a simple anti‐serial connection of two ferroelectric tunnel junctions, based on BaTiO3, with symmetric top metallic electrodes and a common, floating bottom nanometric film electrode, constitute a CRS memory element. It allows nonvolatile storage of binary states (“1” = “HRS+LRS” and “0” = “LRS+HRS”), where HRS (LRS) indicate the high (low) resistance state of each ferroelectric tunnel junction. Remarkably, these states have an identical and large resistance in the remanent state, characteristic of CRS. Here, protocols for writing information are reported and it is shown that non‐destructive or destructive reading schemes can be chosen by selecting the appropriate reading voltage amplitude. Moreover, this dual‐tunnel device has a significantly lower power consumption than a single ferroelectric tunnel junction to perform writing/reading functions, as is experimentally demonstrated. These findings illustrate that the recent impressive development of ferroelectric tunnel junctions can be further exploited to contribute to solving critical bottlenecks in data storage and logic functions implemented using RS elements., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges Ramon y Cajal contract RYC‐2017‐22531. M.Q. was financially supported by China Scholarship Council (CSC) with No. 201406890019. M.Q.'s work was done as a part of the Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting medium speed synchronous electrical generator for 2MW class wind mills

  • Granados, Xavier
  • López López, Josep
  • Muñoz, A.
  • Rodriguez-Izal, J. L.
  • Salvatierra, C.
  • Martínez Fernández, Elena
  • Angurel, Luis A.
  • Puig Molina, Teresa
  • Obradors, Xavier
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., In the context of the National Co-funded Project “Design of a New generation of Generators and Ancillary Equipment for Wind Energy Based on Superconductors”, Gamesa Innovation and Technology S.L.U., ICMAB-CSIC and ICMA-CSIC-UNIZAR have developed and built a first protoype of a Medium Speed generator based in the well proved 2MW DFIG generators which are extensively installed in the Drive Train of the existing 2MW class Wind Turbines. The prototype has been tested in order to determine its thermal and electrical performances and possible cost competitiveness considering the global impact, in the medium size wind generators, considering thermal, mechanical and electrical concerns. Details of the superconducting architecture developed, cryogenics and mechanical concerns are reported.The resulting generator is able to improve the power an simplifies the overall system, Authors acknowledge the support of Spanish Ministry of Economy, Industry and Competitiveness for the Retos Colaboración funding RTC-2014-1740-3, Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Carrier Mobility, Electrical Conductivity, and Optical Transmittance in Epitaxial SrVO3 Thin Films

  • Mirjolet, Mathieu
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
The urgent need for more performant transparent conducting electrodes is stimulating intensive research on oxide thin films based on early transition metals (e.g., V, Nb, Mo, etc.), where it is expected that the partially occupied (i.e., nd1, nd2…) conduction band will give rise to metallic conductivity. Growing thin films of these oxides typically requires an extremely low oxygen pressure. However, in growth methods involving hyperthermal kinetics (such as pulsed laser deposition), this may have severe detrimental effects on the electrical and optical properties of the film. Here, it is shown that the use of a nonreactive gas during a pulsed laser deposition process allows epitaxial SrVO3 films to be obtained with low room temperature resistivity (ρ ≈ 31 μΩ cm), large carrier mobility (μ ≈ 8.3 cm2 V−1 s−1), and large residual resistivity ratio (RRR ≈ 11.5), while improving optical transparency in the visible range. It is argued that the success of this growth strategy relies on the modulation of energetics of plasma species and a concomitant reduction of defects in the films. These findings may find applications in other oxide‐based thin film technologies (i.e., ferroelectric tunnel memories, etc.) where growth‐induced point effects may compromise functionality., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and the MAT2017‐85232‐R (AEI/FEDER, EU), MAT2014‐56063‐C2‐1‐R, and MAT2015‐73839‐JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. M.M. was financially supported by the Spanish Ministry of Science, Innovation and Universities and this work has been done as a part of his Ph.D. program in Physics at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-State Synapses Modulated by Wavelength-Sensitive Temporal Correlations in Optic Sensory Inputs

  • Chen, Yu
  • Casals, Blai
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
Recently, inspired by neurobiological information processing, correlation-based learning has been expressed physically in nonbiological systems by exploiting the time causality of electric signals. Yet, the capability to learn from visual events requires extending these concepts to optical stimuli. Here we show a solid-state system that is sensitive to 100 ms-scale timing of pairs of light stimuli with complementary short/long visible wavelengths, causing asymmetric changes of photoconductance. This property endows optical signals with time causality, leading to wavelength-sensitive time correlations with time scales comparable with those of perceptual recognition. On the basis of these observations, we propose that complex information can be extracted from visual patterns imprinted as spatiotemporal modulations of persistent photoconductance. We suggest that this capability may stimulate neuromorphic hybrid electronic/photonic systems to construct biomimetic spatial memory and navigation maps inspired from neurobiology., The authors acknowledge R. Cichelero and M. Kataja for fruitful discussions and J. Gazquez for structural measurements using transmission electron microscopy. This work was supported by the Spanish Ministerio de Ciencia, Innovacioń y Universidades through Grants No. MAT2017-85232-R (AEI/FEDER,EU), No. MAT2014-56063- 298 C2-1-R, and Severo Ochoa SEV-2015-0496 and the Generalitat de Catalunya through Grant No. 2017 301 SGR1377. Y.C. acknowledges the China Scholarship Council grant n° 201506890029. The work of Y.C. has been done as a part of his Ph.D. program at the Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unexpected large transverse magneto-optic Kerr effect at quasi-normal incidence in magnetoplasmonic crystals

  • Cichelero, Rafael
  • Oskuei, M.A.
  • Kataja, Mikko
  • Hamidi, S.M.
  • Herranz, Gervasi
We investigate the transverse magneto-optic Kerr effect (TMOKE) of magnetoplasmonic crystals grown on top of commercial optical disks. From full angle-resolved scans we can identify Wood’s anomalies related to the excitation of plasmons of different orders. From these maps we also detect a wide range of wavelengths and angles of incidence for which the TMOKE signal is increased due to the interaction of light with surface propagating plasmons. Remarkably, conditions are established for unexpectedly large responses at quasi-normal incidence, where, by fundamental symmetry reasons, the intrinsic TMOKE should be vanishingly small. The key towards this unexpected outcome is to engineer the geometry of magnetoplasmonic crystals, so that first-order plasmon dispersion lines run up towards quasi-normal angles of incidence. These results provide general rules for magneto-optic enhancement and, in particular, show the potential of standard commercial disks as platforms for enhanced magneto-optic devices., This work was supported by the Spanish MAT2017-85232-R (AEI/FEDER, UE), MAT2014-56063-C2-1-R, Severo Ochoa SEV-2015-0496 grant, the Generalitat de Catalunya (2017 SGR 1377). M.A.O. acknowledges financial support from the Ministry of Science, Research and Technology of Iran. R.C acknowledges support from CNPq Brazil., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant topological Hall effect in correlated oxide thin films

  • Vistoli, Lorenzo
  • Wang, Wenbo
  • Sander, Anke
  • Zhu, Qiuxiang
  • Casals, Blai
  • Cichelero, Rafael
  • Barthélémy, Agnès
  • Fusil, Stéphane
  • Herranz, Gervasi
  • Valencia, Sergio
  • Abrudan, Radu
  • Weschke, Eugen
  • Nakazawa, Kazuki
  • Kohno, Hiroshi
  • Santamaria, Jacobo
  • Wu, Weida
  • Garcia, Vincent
  • Bibes, Manuel
Strong electronic correlations can produce remarkable phenomena such as metal–insulator transitions and greatly enhance superconductivity, thermoelectricity or optical nonlinearity. In correlated systems, spatially varying charge textures also amplify magnetoelectric effects or electroresistance in mesostructures. However, how spatially varying spin textures may influence electron transport in the presence of correlations remains unclear. Here we demonstrate a very large topological Hall effect (THE) in thin films of a lightly electron-doped charge-transfer insulator, (Ca,Ce)MnO3. Magnetic force microscopy reveals the presence of magnetic bubbles, whose density as a function of magnetic field peaks near the THE maximum. The THE critically depends on carrier concentration and diverges at low doping, near the metal–insulator transition. We discuss the strong amplification of the THE by correlation effects and give perspectives for its non-volatile control by electric fields., The authors thank V. Cros, V. Dobrosavljevic, J. Iñiguez, J.-V. Kim, D. Maccariello, J. Matsuno, I. Mertig, N. Nagaosa and N. Reyren for useful discussions, J.-Y. Chauleau and M. Viret for second harmonic generation experiments, N. Jaouen for resonant magnetic X-ray diffraction, J. Varignon for preparing Fig. 1a and J.-M. George for his help with some magnetotransport measurements. This research received financial support from the ERC Consolidator grant ‘MINT’ (contract no. 615759) and ANR project ‘FERROMON’. This work was also supported by a public grant overseen by the ANR as part of the ‘Investissement d’Avenir’ programme (LABEX NanoSaclay, ref. ANR-10-LABX-0035) through projects ‘FERROMOTT’ and ‘AXION’ and by the Spanish Government through project no. MAT2014-56063-C2-1-R and MAT2017-85232-R (AEI/FEDER, UE), and Severo Ochoa SEV-2015-0496 and the Generalitat de Catalunya (2014SGR 734 project). B.C. acknowledges grant no. FPI BES-2012-059023, R.C. acknowledges support from CNPq-Brazil, and J.S. thanks the University Paris-Saclay (D’Alembert programme) and CNRS for financing his stay at CNRS/Thales. Work at Rutgers was supported by the Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, US Department of Energy under award no. DE-SC0018153. H.K. is supported by JSPS KAKENHI grants nos. 25400339, 15H05702 and 17H02929. K.N. is supported by a Grant-in-Aid for JSPS Research Fellow grant no. 16J05516, and by a Program for Leading Graduate Schools ‘Integrative Graduate Education and Research in Green Natural Sciences’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gap suppression at a Lifshitz transition in a multi-condensate superconductor

  • Singh, G.
  • Jouan, A.
  • Herranz, Gervasi
  • Scigaj, Mateusz
  • Sánchez Barrera, Florencio
  • Benfatto, L.
  • Caprara, S.
  • Grilli, M.
  • Saiz, G.
  • Couedo, F.
  • Feuillet Palma, C.
  • Lesueur, J.
  • Bergeal, N.
In multi-orbital materials, superconductivity can exhibit several coupled conden- sates. In this context, quantum con nement in two-dimensional superconducting oxide interfaces o ers new degrees of freedom to engineer the band structure and selectively control 3d-orbitals occupancy by electrostatic doping. Here, we use resonant microwave transport to extract the super uid sti ness of the (110)-oriented LaAlO3/SrTiO3 in- terface in the entire phase diagram. We evidence a transition from single-condensate to two-condensate superconductivity driven by continuous and reversible electrostatic doping, which we relate to the Lifshitz transition between 3d-bands based on numerical simulations of the quantum well. We nd that the superconducting gap is suppressed while the second band is populated, challenging the Bardeen-Cooper-Schrie er theory. We ascribe this behavior to the existence of superconducting order parameters with opposite signs in the two condensates, due to a repulsive coupling. Our ndings o er an innovative perspective on the possibility to tune and control multiple-orbitals physics in superconducting interfaces., The authors thank K. Behnia and J. Lorenzana for useful discussions. This work was supported by the Région Ile-de-France in the framework of CNano IdF, OXYMORE and Sesame programmes, by CNRS through a PICS programme (S2S) and ANR JCJC (Nano-SO2DEG). This work was supported by the Spanish MAT2017-85232-R, MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 grants and the Generalitat de Catalunya (2017 SGR 1377). This work was supported by the Italian MAECI under the Italia–India collaborative project SUPERTOP-PGR04879. The authors acknowledge funding from the project Quantox of QuantERA ERA-NET Cofund in Quantum Technologies (grant agreement no. 731473) implemented within the European Union’s Horizon 2020 Programme. The authors also acknowledge the COST project Nanoscale Coherent Hybrid Devices for Superconducting Quantum Technologies–Action CA16218., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering Oxygen Migration for Homogeneous Volume Resistive Switching in 3-Terminal Devices

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-reciprocal diffraction in magnetoplasmonic gratings

  • Cichelero, Rafael
  • Kataja, Mikko
  • Campoy Quiles, Mariano
  • Herranz, Gervasi
Phase-matching conditions—used to bridge the wave vector mismatch between light and surface plasmon polaritons (SPPs)—have been exploited recently to enable nonreciprocal optical propagation and enhanced magneto-optic responses in magnetoplasmonic systems. Here we show that using diffraction in conjunction with plasmon excitations leads to a photonic system with a more versatile and flexible response. As a testbed, we analyzed diffracted magneto-optical effects in magnetoplasmonic gratings, where broken time-reversal symmetry induces frequency shifts in the energy and angular spectra of plasmon resonance. These result in exceptionally large responses in the diffracted magnetooptical effect. The concepts presented here can be used to develop non-reciprocal optical devices that exploit diffraction, in order to achieve tailored electromagnetic responses., Spanish Ministerio de Economía y Competitividad through projects MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, Severo Ochoa (SEV-2015-0496) and MAT2015-70850-P, by the Generalitat de Catalunya (2017 SGR 1377), by CNPq – Brazil, and by the European Comission (Marie Skłodowska-Curie IF EMPHASIS - DLV-748429)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Correlations between Metal–Insulator Transition and Resistive Switching Effect in Metallic Perovskite Oxides

  • Gonzalez Rosillo, Juan Carlos
  • Catalano, Sara
  • Maggio-Aprile, Ivan
  • Gibert, Marta
  • Obradors, Xavier
  • Palau, Anna
  • Puig Molina, Teresa
Strongly correlated perovskite oxides are a class of materials with fascinating intrinsic physical functionalities due to the interplay of charge, spin, orbital ordering, and lattice degrees of freedom. Among the exotic phenomena arising from such an interplay, metal–insulator transitions (MITs) are fundamentally still not fully understood and are of large interest for novel nanoelectronics applications, such as resistive switching‐based memories and neuromorphic computing devices. In particular, rare‐earth nickelates and lanthanum strontium manganites are archetypical examples of bandwidth‐controlled and band‐filling‐controlled MIT, respectively, which are used in this work as a playground to correlate the switching characteristics of the oxides and their MIT properties by means of local probe techniques in a systematic manner. These findings suggest that an electric‐field‐induced MIT can be triggered in these strongly correlated systems upon generation of oxygen vacancies and establish that lower operational voltages and larger resistance ratios are obtained in those films where the MIT lies closer to room temperature. This work demonstrates the potential of using MITs in the next generation of nanoelectronics devices., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant no. SEV‐2015‐0496), CONSOLIDER Excellence Network (Grant no. MAT2015‐68994‐REDC), COACHSUPENERGY project (Grant no. MAT2014‐56063‐C2‐1‐R, and SuMaTe RTI2018‐095853‐B‐C21, cofinanced by the European Regional Development Fund), OXSWITCH project funded by Centro Superior de Investigaciones Científicas (CSIC), and from the Catalan Government with Grant no. 2017‐SGR‐1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218. J.C.G.‐R. thanks Spanish Ministry of Economy for his FPI Spanish grant (Grant no. BES‐2012‐053814). The authors also acknowledge the Scientific Services at ICMAB, specially A. Gómez from the atomic force microscopy service., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-high critical current densities of superconducting YBa2Cu3O7-δ thin films in the overdoped state

  • Stangl, Alexander
  • Palau, Anna
  • Deutscher, Guy
  • Obradors, Xavier
  • Puig Molina, Teresa
The functional properties of cuprates are strongly determined by the doping state and carrier density. We present an oxygen doping study of YBa2Cu3O7-δ (YBCO) thin films from underdoped to overdoped state, correlating the measured charge carrier density, nH, the hole doping, p, and the critical current density, Jc. Our results show experimental demonstration of strong increase of Jc with nH, up to Quantum Critical Point (QCP), due to an increase of the superconducting condensation energy. The ultra-high Jc achieved, 90 MA cm−2 at 5 K corresponds to about a fifth of the depairing current, i.e. a value among the highest ever reported in YBCO films. The overdoped regime is confirmed by a sudden increase of nH, associated to the reconstruction of the Fermi-surface at the QCP. Overdoping YBCO opens a promising route to extend the current carrying capabilities of rare-earth barium copper oxide (REBCO) coated conductors for applications., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), the EU ULTRASUPERTAPE (ERC-2014-ADG-669504) and EUROTAPES project (FP7-NMP-Large-2011-280432), and the Spanish CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1-R) and SuMaTe project (RTI2018-095853-B-C21), both cofinanced by the European Regional Development Fund, and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218.We also acknowledge the Scientific Services at ICMAB. We thank Juri Banchewski for some of the last transport experiments. A.S. is grateful for illuminating discussions on the manuscript with Stephan Steinhauer (KTH, Sweden)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust ferroelectricity in epitaxial Hf1/2Zr1/2O2 thin films

  • Lyu, Jike
  • Fina, Ignasi
  • Solanas, Raul
  • Fontcuberta, Josep
  • Sánchez Barrera, Florencio
Ferroelectric orthorhombic Hf0.5Zr0.5O2 thin films have been stabilized epitaxially on La2/3Sr1/3MnO3/SrTiO3(001) by pulsed laser deposition. The epitaxial orthorhombic films, (111)-oriented and with a very flat surface, show robust ferroelectric properties at room temperature. They present a remnant polarization around 20 μC/cm2 without the need of a wake-up process, a large coercive electric field of around 3 MV/cm, an extremely long retention extending well beyond 10 years, and an endurance up to about 108 cycles. Such outstanding properties in the nascent research on epitaxial HfO2-based ferroelectric films can pave the way for a better understanding of the effects of orientation, interfaces, strain, and defects on ferroelectricity in HfO2., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, and MAT2015-73839-JIN projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. I.F. acknowledges RyC contract RYC-2017-22531. J.L. was financially supported by China Scholarship Council (CSC) with No. 201506080019. J.L. work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing vortex pinning in YBa2Cu3O7-x superconducting films up to high magnetic fields

  • Vallés, Ferran
  • Palau, Anna
  • Abraimov, Dmytro
  • Jaroszynski, Jan
  • Constantinescu, Anca Monia
  • Mundet, Bernat
  • Obradors, Xavier
  • Larbalestier, David
  • Puig Molina, Teresa
The magnetic flux pinning capabilities of YBa2Cu3O7-x (YBCO) coated conductors vary strongly across different regions of the magnetic field–temperature phase diagram and with the orientation of the magnetic field θ. Here, we determine the optimal pinning landscape for a given region of the phase diagram by investigating the critical current density Jc(H,θ,T) in the 5–77 K temperature range, from self-field to high magnetic fields of 35 T. Our systematic analysis reveals promising routes for artificially engineering YBCO coated conductors in any region of interest of the phase diagram. In solution-derived nanocomposites, we identify the relevance of coexisting high amounts of short stacking faults, Cu-O vacancy clusters, and segmentation of twin boundaries, in combination with nanoparticles, for enhanced pinning performance at high magnetic fields and low temperatures. Moreover, we demonstrate that twin boundaries preserve a high pinning energy in thick YBCO films, which is beneficial for the pinning performance at high magnetic fields and high temperatures., The authors acknowledge financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496), ULTRASUPERTAPE (ERC-2014-ADG-669504), EUROTAPES project (FP7-NMP-Large-2011-280432), the CONSOLIDER Excellence Network (Grant No. MAT2015-68994-REDC), COACHSUPENERGY project (Grant No. MAT2014-56063-C2-1- R and SuMaTe RTI2018-095853-B-C21, co-financed by the European Regional Development Fund), and from the Catalan Government with Grant No. 2014-SGR-753 and 2017-SGR-1519. Authors also thank the network collaboration of EU COST action NANOCOHYBRI CA16218. We also acknowledge the Scientific Services at ICMAB and Z. Li and P. Cayado for the growth of the studied samples. A portion of this work was performed at the National High Magnetic Field Laboratory, which is supported by the National Science Foundation Cooperative Agreement No. DMR-1644779 and the State of Florida., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conical magnetic structures in multiferroic SrScxFe12-xO19 hexaferrites derived from powder neutron diffraction

  • Qureshi, N.
  • Ruiz-Martin, M.D.
  • Puente-Orench, I.
  • Fernandez-Diaz, M.T.
  • Balbashov, A.M.
  • Ivanov, V.Y.
  • Skumryev, V.
  • Mukhin, A.A.
We present a systematic powder neutron diffraction study on Sr-based M-type hexaferrites SrScxFe12-xO19 using high-resolution and high-flux instruments. We have derived the magnetic configurations for the compounds with x = 1.4, 1.6, and 1.8 at room temperature and at 2 K revealing a ferrimagnetic structure and a complex conical magnetic structure, respectively, where the latter is decomposed into the axial ferrimagnetic and the helicoidally modulated component in the hexagonal a-b plane. Our temperature- and composition-dependent investigation reveals that doping nonmagnetic Sc into this system reinforces the frustration and pushes the transition between the two ordered phases toward higher temperatures. The continuous opening of the spin cone suggests a smooth transition from an easy-axis toward an easy-plane anisotropy with decreasing temperature, which can be reinforced by increasing Sc content.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, G. G.
  • Carrera i Vilanova, Miquel
  • Granados, X.
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., This work was supported in part by the followings grants: “Science Without Borders” from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq); by the European Agency (EU) through the Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO) Project under Grant EU FP7-2013-ICT-609029, the European Development of Superconducting Tapes (EUROTAPES) Project under Grant EU-FP7 NMP-LA-2012- 280432, the European Consortium for the Development of Fusion Energy (EUROfusion, PPPT-WPMAG 2014), and EU COST ACTIONS MP1201 and MP1014; by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D under Grant SEV-2015-0496, CONSOLIDER Excellence Network under Grant MAT2015- 68994-REDC, COACHSUPENERGY project under Grant MAT2014-56063- C2-1-R, co-financed by the European Regional Development Fund; by the Catalan Government under Grant 2014-SGR-753 and Xarmae.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetoelectric effect and phase transitions in CuO in external magnetic fields

  • Wang, Zhaosheng
  • Qureshi, Navid|||0000-0002-0727-2258
  • Yasin, Shadi
  • Mukhin, Alexander|||0000-0003-3113-1110
  • Ressouche, Eric
  • Zherlitsyn, Sergei
  • Skourski, Yurii
  • Geshev, Julian|||0000-0003-3730-3657
  • Ivanov, Vsevolod|||0000-0001-6096-6884
  • Gospodinov, Marin
  • Skumryev, Vassil|||0000-0003-1375-4824
Apart from being so far the only known binary multiferroic compound, CuO has a much higher transition temperature into the multiferroic state, 230 K, than any other known material in which the electric polarization is induced by spontaneous magnetic order, typically lower than 100 K. Although the magnetically induced ferroelectricity of CuO is firmly established, no magnetoelectric effect has been observed so far as direct crosstalk between bulk magnetization and electric polarization counterparts. Here we demonstrate that high magnetic fields of ≈50 T are able to suppress the helical modulation of the spins in the multiferroic phase and dramatically affect the electric polarization. Furthermore, just below the spontaneous transition from commensurate (paraelectric) to incommensurate (ferroelectric) structures at 213 K, even modest magnetic fields induce a transition into the incommensurate structure and then suppress it at higher field. Thus, remarkable hidden magnetoelectric features are uncovered, establishing CuO as prototype multiferroic with abundance of competitive magnetic interactions. Whilst CuO possesses spontaneous electrical polarization induced by its magnetic order, no magnetoelectric control of one by the other has been observed. Here, the authors demonstrate modification of the electrical polarization of CuO by suppressing its magnetic helix via an applied magnetic field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric-field adjustable time-dependent magnetoelectric response in martensitic FeRh alloy

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Martí Rovirosa, Xavier
  • Macià, Ferran|||0000-0001-5972-4810
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sort, Jordi|||0000-0003-1213-3639
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic-ferromagnetic phases in FeRh, unbalanced by voltage-controlled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hidden magnetic states emergent under electric field, in a room temperature composite magnetoelectric multiferroic

  • Clarkson, J. D.
  • Fina, Ignasi|||0000-0003-4182-6194
  • Liu, Z. Q.
  • Lee, Y.
  • Kim, J.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Wisotzki, S.
  • Sáncherz, F.
  • Sort, Jordi|||0000-0003-1213-3639
  • Hsu, S. L.
  • Ko, C.
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Wu, J.
  • Christen, H. M.
  • Heron, J. T.
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Salahuddin, S.
  • Kioussis, N.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Martí, X.
  • Ramesh, Ramamoorthy
The ability to control a magnetic phase with an electric field is of great current interest for a variety of low power electronics in which the magnetic state is used either for information storage or logic operations. Over the past several years, there has been a considerable amount of research on pathways to control the direction of magnetization with an electric field. More recently, an alternative pathway involving the change of the magnetic state (ferromagnet to antiferromagnet) has been proposed. In this paper, we demonstrate electric field control of the Anomalous Hall Transport in a metamagnetic FeRh thin film, accompanying an antiferromagnet (AFM) to ferromagnet (FM) phase transition. This approach provides us with a pathway to "hide" or "reveal" a given ferromagnetic region at zero magnetic field. By converting the AFM phase into the FM phase, the stray field, and hence sensitivity to external fields, is decreased or eliminated. Using detailed structural analyses of FeRh films of varying crystalline quality and chemical order, we relate the direct nanoscale origins of this memory effect to site disorder as well as variations of the net magnetic anisotropy of FM nuclei. Our work opens pathways toward a new generation of antiferromagnetic - ferromagnetic interactions for spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Epitaxial Growth Mechanisms of Solution Derived Functional Oxide Thin Films

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (CeZrO , LaNiO, and BaSrTiO) grown on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unravelling and controlling hidden imprint fields in ferroelectric capacitors

  • Liu, Fanmao|||0000-0001-7590-8062
  • Fina, Ignasi|||0000-0003-4182-6194
  • Bertacco, Riccardo|||0000-0002-8109-9166
  • Fontcuberta, Josep|||0000-0002-7955-2320
Ferroelectric materials have a spontaneous polarization that can point along energetically equivalent, opposite directions. However, when ferroelectric layers are sandwiched between different metallic electrodes, asymmetric electrostatic boundary conditions may induce the appearance of an electric field (imprint field, E imp) that breaks the degeneracy of the polarization directions, favouring one of them. This has dramatic consequences on functionality of ferroelectric-based devices such as ferroelectric memories or photodetectors. Therefore, to cancel out the E imp, ferroelectric components are commonly built using symmetric contact configuration. Indeed, in this symmetric contact configuration, when measurements are done under time-varying electric fields of relatively low frequency, an archetypical symmetric single-step switching process is observed, indicating E imp ∼ 0. However, we report here on the discovery that when measurements are performed at high frequency, a well-defined double-step switching is observed, indicating the presence of E imp. We argue that this frequency dependence originates from short-living head-to-head or tail-to-tail ferroelectric capacitors in the device. We demonstrate that we can modulate E imp and the life-time of head-to-head or tail-to-tail polarization configurations by adjusting the polarization screening charges by suitable illumination. These findings are of relevance to understand the effects of internal electric fields on pivotal ferroelectric properties, such as memory retention and photoresponse.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monolithic integration of room-temperature multifunctional BaTiO 3 -CoFe 2 O 4 epitaxial heterostructures on Si(001)

  • Scigaj, Mateusz|||0000-0002-8703-948X
  • Dix, Nico
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Varela del Arco, María|||0000-0002-6582-7004
  • Fina, Ignasi|||0000-0003-4182-6194
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
The multifunctional (ferromagnetic and ferroelectric) response at room temperature that is elusive in single phase multiferroic materials can be achieved in a proper combination of ferroelectric perovskites and ferrimagnetic spinel oxides in horizontal heterostructures. In this work, lead-free CoFe 2 O 4 /BaTiO 3 bilayers are integrated with Si(001) using LaNiO 3 /CeO 2 /YSZ as a tri-layer buffer. They present structural and functional properties close to those achieved on perovskite substrates: the bilayers are fully epitaxial with extremely flat surface, and exhibit robust ferromagnetism and ferroelectricity at room temperature.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Control of the polarization of ferroelectric capacitors by the concurrent action of light and adsorbates

  • Liu, Fanmao|||0000-0001-7590-8062
  • Fina, Ignasi|||0000-0003-4182-6194
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Rappe, Andrew M.|||0000-0003-4620-6496
  • Fontcuberta, Josep|||0000-0002-7955-2320
Ferroelectric perovskites hold promise of enhanced photovoltaic efficiency and photocatalytic activity. Consequently, the photoresponse of oxide ferroelectric thin films is an active field of research. In electrode/ferroelectric/electrode devices, internal charge in the ferroelectric, free charge in the electrodes, and buried adsorbates at interfaces combine to screen the ferroelectric polarization and to stabilize the polar state. Under illumination, photoinduced carriers and photodissociated adsorbates may disrupt the screening equilibrium, modifying the switchable polarization and altering its expected benefits. Here, we explore the photoresponse of BaTiO thin films in a capacitor geometry, focusing on the effects of visible illumination on the remanent polarization. By combining ferroelectric and X-ray photoelectron spectroscopy, we discover that photoreaction of charge-screening HO-derived adsorbates at the buried metal-ferroelectric Pt/BaTiO interface plays an unexpected pivotal role, enabling a substantial modulation (up to 75%) of the switchable remanent polarization by light. These findings illustrate that the synergy between photochemistry and photovoltaic activity at the surface of a ferroelectric material can be exploited to tune photoferroelectric activity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct imaging of delayed magneto-dynamic modes induced by surface acoustic waves

  • Foerster, Michael|||0000-0002-4147-6668
  • Macià, Ferran|||0000-0001-5972-4810
  • Statuto, Nahuel|||0000-0002-0062-760X
  • Finizio, Simone
  • Hernández-Mínguez, Alberto
  • Lendínez, Sergi
  • Santos, Paulo V.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Hernàndez, Joan Manel
  • Kläui, Mathias|||0000-0002-4848-2569
  • Aballe, Lucía|||0000-0003-1810-8768
The magnetoelastic effect-the change of magnetic properties caused by the elastic deformation of a magnetic material-has been proposed as an alternative approach to magnetic fields for the low-power control of magnetization states of nanoelements since it avoids charge currents, which entail ohmic losses. Here, we have studied the effect of dynamic strain accompanying a surface acoustic wave on magnetic nanostructures in thermal equilibrium. We have developed an experimental technique based on stroboscopic X-ray microscopy that provides a pathway to the quantitative study of strain waves and magnetization at the nanoscale. We have simultaneously imaged the evolution of both strain and magnetization dynamics of nanostructures at the picosecond time scale and found that magnetization modes have a delayed response to the strain modes, adjustable by the magnetic domain configuration. Our results provide fundamental insight into magnetoelastic coupling in nanostructures and have implications for the design of strain-controlled magnetostrictive nano-devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polar domain walls trigger magnetoelectric coupling

  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Skumryev, Vassil|||0000-0003-1375-4824
  • Laukhin, Vladimir
  • Granados García, Xavier
  • Salje, Ekhard K. H.
Interface physics in oxides heterostructures is pivotal in material's science. Domain walls (DWs) in ferroic systems are examples of naturally occurring interfaces, where order parameter of neighboring domains is modified and emerging properties may develop. Here we show that electric tuning of ferroelastic domain walls in SrTiO leads to dramatic changes of the magnetic domain structure of a neighboring magnetic layer (LaSrMnO) epitaxially clamped on a SrTiO substrate. We show that the properties of the magnetic layer are intimately connected to the existence of polar regions at twin boundaries of SrTiO, developing at , that can be electrically modulated. These findings illustrate that by exploiting the responsiveness of DWs nanoregions to external stimuli, even in absence of any domain contribution, prominent and adjustable macroscopic reactions of neighboring layers can be obtained. We conclude that polar DWs, known to exist in other materials, can be used to trigger tunable responses and may lead to new ways for the manipulation of interfacial emerging properties.