Pasar al contenido principal

TECNOLOGIA DE FLUIDOS SOSTENIBLE PARA LA INGENIERIA DE MATERIALES POROSOS MULTICOMPONENTES NANOESTRUCTURADOS (SUBP1: TECNOLOGIA LIMPIA PARA LA NANOESTRUCTURACION DE PRODUCTOS

CTQ2014-56324-C2-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hollow Microcrystals of Copper Hexafluoroacetylacetonate-Pyridine Derivative Adducts via Supercritical CO2 Recrystallization

  • López Periago, Ana M.
  • Vallcorba, Oriol
  • Domingo, Concepción
  • Ayllón, José A.
An innovative crystallization process, based in the use of the eco-friendly supercritical carbon dioxide (scCO2) solvent, is presented for the production of coordination compounds macrocrystals of general formula [Cu(hfacac)2(dPy)2], with intriguing prismatic hollow structures and single polymorphic forms. On the contrary, conventional solvents yielded compact microstructures. Studied pyridine derivatives (dPy) were 4-phenylpyridine, PhPy; 4-benzylylpyridine, BzPy; and 4-acetylpyridine, AcPy. In the specific case of the [Cu(hfacac)2(AcPy)2] adduct, the use of scCO2 as a solvent allows obtaining a pure polymorph, while the conventional solvent trials yielded a mixture of two polymorphs. Four new crystalline structures have been resolved from single crystal X-ray diffraction. All the structures consist in mononuclear complexes connected through intermolecular interactions, including H···H, H···O, F···F, C-F···Caromatic and/or C-F··· interactions, generating bidimensional networks that determine their crystallization mode in scCO2., This work was partially financed by the Spanish National Plan of Research CTQ2014-56324 and Severo Ochoa SEV-2015-0496, and by the Generalitat de Catalunya 2014SGR377. A. López-Periago acknowledges the RyC-2012-11588 contract. ALBA synchrotron is acknowledged for the provision of beamtime., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-safe processing of polylactic-co-caprolactone and polylactic acid blends to fabricate fibrous porous scaffolds for in vitro mesenchymal stem cells adhesion and proliferation

  • Salerno, Aurelio
  • Guarino, Vincenzo
  • Oliviero, Olimpia
  • Ambrosio, Luigi
  • Domingo, Concepción
In this study, the design and fabrication of porous scaffolds, made of blends of polylactic-co-caprolactone (PLC) and polylactic acid (PLA) polymers, for tissue engineering applications is reported. The scaffolds are prepared by means of a bio-safe thermally induced phase separation (TIPS) approach with or without the addition of NaCl particles used as particulate porogen. The scaffolds are characterized to assess their crystalline structure, morphology and mechanical properties, and the texture of the pores and the pore size distribution. Moreover, in vitro human mesenchymal stem cells (hMSCs) culture tests have been carried out to demonstrate the biocompatibility of the scaffolds. The results of this study demonstrate that all of the scaffold materials processed by means of TIPS process are semi-crystalline. Furthermore, the blend composition affected polymer crystallization and, in turn, the nano and macro-structural properties of the scaffolds. Indeed, neat PLC and neat PLA crystallize into globular and randomly arranged sub micro-size scale fibrous conformations, respectively. Concomitantly, the addition of NaCl particles during the fabrication route allows for the creation of an interconnected network of large pores inside the primary structure while resulted in a significant decrease of scaffolds mechanical response. Finally, the results of cell culture tests demonstrate that both the micro and macro-structure of the scaffold affect the in vitro hMSCs adhesion and proliferation., C. Domingo acknowledges the financial support of the Generalitat de Catalunya through the project 2014SGR-377 and the Spanish Plan Nacional project CTQ2014-56324., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, crystal structure and magnetic properties of a Cu(II) paddle-wheel complex with mixed bridges

  • Soldevila Sanmartín, Joan
  • Ayllón, José A.
  • Calvet, Teresa
  • Font Bardia, Mercè
  • Domingo, Concepción
  • Pons, Josefina
The synthesis and characterization of a mixed carboxylate paddle-wheel copper complex, with formula [Cu(μ-Pip)(μ-MeCO2)(MeOH)]2 (Pip = piperonylate or 1,3-benzodioxole-5-carboxylate and MeCO2 = acetate), is here reported. The described compound is a binuclear complex, each pair of similar carboxylate ligands occupying mutually trans bridging positions, while the methanol occupies the apical positions. The dimers are arranged into 2D layers in the bc plane through a network of O-H ⋯ O hydrogen bonds established between the methanol and the acetate ligand. Magnetic studies showed a strong antiferromagnetic Cu ⋯ Cu interaction (J = − 308 cm− 1), in agreement with the presence of four μ-κO-κO′ carboxylates bridging the metallic centers in the binuclear complex., This work was partially financed by the Spanish National Plan of ResearchCTQ2014-56324 and Severo OchoaSEV-2015-0496, and by the 2014SGR260 and 2014SGR377 projects from the Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead(II) fluoride particles synthesized by a straightforward mechanochemical route

  • Subirana Manzanares, Maria Angels
  • Sánchez Sala, Marta
  • Pons, Josefina
  • Domingo, Concepción
  • Ayllón, José A.
A low temperature mechanochemistry procedure was used to prepare lead(II) fluoride particles, with the objective of synthetizing pure α and β phases. Lead acetate trihydrate was reacted with ammonium fluoride by hand-grounding, thus forming a white liquid mixture containing lead(II) fluoride, water and ammonium acetate. A further short thermal treatment, performed at a low temperature (ca. 100 °C), allowed the evaporation of by-products, giving directly a powder constituted by pure PbF2. According to XRD analysis, the obtained product involved mostly the cubic β-PbF2 phase, with only traces of the orthorhombic α-PbF2 phase. SEM analysis indicated the formation of crystalline aggregates, without a well defined morphology. This synthetic strategy could be easily modified by adding small quantities of organic additives used to tune the crystalline phase. Hence, the addition of either citric acid or poly (acrylic acid-co-maleic acid) facilitated the production of the cubic phase (β-PbF2), while the addition of selected amines strongly favored the crystallization of the orthorhombic phase (α-PbF2)., This work was partially financed by the Generalitat de Catalunya 2014SGR377 and by the Spanish National Plan of Research CTQ2014-56324., Peer reviewed