Pasar al contenido principal

NANOESTRUCTURAS MOLECULARES FUNCIONALES PARA DISPOSITIVOS OPTOELECTRONICOS: QUIMICA EN DISOLUCION

MAT2016-78293-C6-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Exploring a route to cyclic acenes by on-surface synthesis

  • Schulz, Fabian
  • García Melo, Fátima
  • Kaisser, Katharina
  • Pérez Meirás, María Dolores
  • Guitián Rivera, Enrique
  • Gross, Leo
  • Peña Gil, Diego
A route to generate cyclacenes by on-surface synthesis is explored. We started by synthesizing two tetraepoxycyclacenes by sequences of Diels–Alder cycloadditions. Subsequently, these molecules were deposited onto Cu(111) and scanning-tunneling-microscopy(STM)-based atom manipulation was employed to dissociate the oxygen atoms. Atomic force microscopy (AFM) with CO-functionalized tips enabled the detailed characterization of the reaction products and revealed that, at most, two oxygens per molecule could be removed. Importantly, our experimental results suggest that the generation of cyclacenes by the described route might be possible for larger epoxycyclacenes
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Synthesis and reactivity of a trigonal porous nanographene on a gold surface

  • Zuzak, Rafał
  • Pozo Míguez, Iago
  • Engelund, Mads
  • García Lekue, Aran
  • Vilas Varela, Manuel
  • Alonso, José M.
  • Szymonski, Marek
  • Guitián Rivera, Enrique
  • Pérez Meirás, María Dolores
  • Godlewski, Szymon
  • Peña Gil, Diego
The synthesis of porous nanographenes is a challenging task for solution chemistry, and thus, on-surface synthesis provides an alternative approach. Here, we report the synthesis of a triporous nanographene with 102 sp2 carbon atoms by combining solution and surface chemistry. The carbon skeleton was obtained by Pd-catalyzed cyclotrimerization of arynes in solution, while planarization of the molecule was achieved through two hierarchically organized on-surface cyclodehydrogenation reactions, intra- and inter-blade. Remarkably, the three non-planar [14]annulene pores of this nanographene further evolved at higher temperatures showing interesting intra-porous on-surface reactivity
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Studying an antiaromatic polycyclic hydrocarbon adsorbed on different surfaces

  • Mjazik, Zsolt
  • Pavliček, Niko
  • Vilas-Varela, Manuel
  • Pérez Meirás, María Dolores
  • Moll, Nikolaj
  • Guitián Rivera, Enrique
  • Meyer, Gehrard
  • Peña Gil, Diego
  • Gross, Leo
Antiaromatic and open-shell molecules are attractive because of their distinct electronic and magnetic behaviour. However, their increased reactivity creates a challenge for probing their properties. Here, we describe the on-surface and in-solution generation and characterisation of a highly reactive antiaromatic molecule: indeno[1,2-b]fluorene (IF). In solution, we generated IF by KI-induced dehalogenation of a dibromo-substituted precursor molecule and found that IF survives for minutes at ambient conditions. Using atom manipulation at low temperatures we generated IF on Cu(111) and on bilayer NaCl. On these surfaces, we characterised IF by bond-order analysis using non-contact atomic force microscopy with CO-functionalised tips and by orbital imaging using scanning tunnelling microscopy. We found that the closed-shell configuration and antiaromatic character predicted for gas-phase IF are preserved on the NaCl film. On Cu(111), we observed significant bond-order reorganisation within the s-indacene moiety because of chemisorption, highlighting the importance of molecule surface interactions on the π-electron distribution
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Intramolecular Coupling of Terminal Alkynes by Atom Manipulation

  • Albrecht, Florian
  • Rey Vieites, Dulce María
  • Fatayer, Shadi
  • Schulz, Fabian
  • Pérez Meirás, María Dolores
  • Peña Gil, Diego
  • Gross, Leo
Glaser‐like coupling of terminal alkynes by thermal activation is extensively used in on‐surface chemistry. Here we demonstrate an intramolecular version of this reaction performed by atom manipulation. We used voltage pulses from the tip to trigger a Glaser‐like coupling between terminal alkyne carbons within a custom‐synthesized precursor molecule adsorbed on bilayer NaCl on Cu(111). Different conformations of the precursor molecule and the product were characterized by molecular structure elucidation with atomic force microscopy and orbital density mapping with scanning tunneling microscopy, accompanied by density functional theory calculations. We revealed partially dehydrogenated intermediates, providing insight into the reaction pathway
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Dodecacene generated on surface: reopening of the energy gap

  • Eisenhut, Frank
  • Kühne, T.
  • García Melo, Fátima
  • Fernández Castro, Saleta
  • Guitián Rivera, Enrique
  • Pérez Meirás, María Dolores
  • Trinquier, Georges
  • Cuniberti, Gianaurelio
  • Joachim, Christian
  • Peña Gil, Diego
  • Moresco, Francesca
The acene series represents a model system to investigate the intriguing electronic properties of extended π-electron structures in the one-dimensional limit, which are important for applications in electronics and spintronics and for the fundamental understanding of electronic transport. This article presents the on-surface generation of the longest acene obtained so far: dodecacene. Scanning tunneling spectroscopy gives access to the energy position and spatial distribution of its electronic states on the Au(111) surface. We observe that, after a progressive closing of the gap and a stabilization to about 1 eV at the length of decacene and undecacene, the energy gap of dodecacene unexpectedly increases to 1.4 eV. Considering the acene series as an exemplary general case, the paper discusses the evolution with length of the single tunneling resonances in comparison with ionization energy, electronic affinity, and optical gap
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building a 22-ring nanographene by combining in-solution and on-surface syntheses

  • Zuzak, Rafał
  • Castro-Esteban, Jesús
  • Brandimarte, Pedro
  • Engelund, Mads
  • Cobas, Agustín
  • Piątkowski, Piotr
  • Kolmer, Marek
  • Pérez, Dolores
  • Guitián, Enrique
  • Szymonski, Marek
  • Sánchez-Portal, Daniel
  • Godlewski, Szymon
  • Peña, Diego
A nanographene formed by the fusion of 22 benzene rings has been prepared by combining an in-solution Pd-catalyzed cycloaddition reaction and on-surface Au-promoted cyclodehydrogenation. The structure and electronic properties of the resulting three-fold symmetric CH molecule have been characterized by scanning probe microscopy with atomic resolution and corroborated by theoretical modelling., This research was supported by the National Science Center, Poland (2017/26/E/ST3/00855), the EU project PAMS (610446), the Agencia Estatal de Investigacion (MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, FIS2017-83780-P and CTQ2016-78157-R), the Xunta de Galicia (Centro singular de investigacion de Galicia, acreditacion 2016-2019, ED431G/09) and the European Regional Development Fund (ERDF). R. Z. acknowledges support received from the National Science Center, Poland (2017/24/T/ST5/00262)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Site-selective reversible Diels–Alder reaction between a biphenylene-based polyarene and a semiconductor surface

  • Godlewski, Szymon
  • Engelund, Mads
  • Peña, Diego
  • Zuzak, Rafał
  • Kawai, Hiroyo
  • Kolmer, Marek
  • Caeiro, Jorge
  • Guitián, Enrique
  • Vollhardt, K. Peter C.
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
  • Pérez, Dolores
Understanding the mechanisms involved in the covalent attachment of organic molecules to surfaces is a major challenge for nanotechnology and surface science. On the basis of classical organic chemistry mechanistic considerations, key issues such as selectivity and reactivity of the organic adsorbates could be rationalized and exploited for the design of molecular-scale circuits and devices. Here we use tris(benzocyclobutadieno)triphenylene, a singular Y-shaped hydrocarbon containing antiaromatic cyclobutadienoid rings, as a molecular probe to study the reaction of polycyclic conjugated molecules with atomic scale moieties, dangling-bond (DB) dimers on a hydrogen-passivated Ge(001):H surface. By combining molecular design, synthesis, scanning tunneling microscopy and spectroscopy (STM/STS) and computational modeling, we show that the attachment involves a concerted [4+2] cycloaddition reaction that is completely site-selective and fully reversible. This selectivity, governed by the bond alternation induced by the presence of the cyclobutadienoid rings, allows for the control of the orientation of the molecules with respect to the surface DB-patterning. We also demonstrate that by judicious modification of the electronic levels of the polycyclic benzenoid through substituents, the reaction barrier height can be modified. Finally, we show that after deliberate tip-induced covalent bond cleavage, adsorbed molecules can be used to fine tune the electronic states of the DB dimer. This power to engineer deliberately the bonding configuration and electronic properties opens new perspectives for creating prototypical nanoscale circuitry., This work was supported by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract no. 610446), by the Polish Ministry for Science and Higher Education from financial resources for science in 2013–2017 granted for an international co-financed project (contract no. 2913/7.PR/2013/2) and by projects CTQ2016-78157-R, MAT2016-78293-C6-3R and MAT2016-78293-C6-4R (AEI/FEDER, UE). EG, DP and DP are grateful for financial support from the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09) and the European Union (European Regional Development Fund-ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up synthesis of multifunctional nanoporous graphene

  • Moreno, César
  • Vilas-Varela, Manuel
  • Kretz, Bernhard
  • Garcia-Lekue, Aran
  • Costache, Marius V.
  • Paradinas, Markos
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Valenzuela, Sergio O.
  • Peña, Diego
  • Mugarza, Aitor
Nanosize pores can turn semimetallic graphene into a semiconductor and, from being impermeable, into the most efficient molecular-sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the 1-nanometer range. The size, density, morphology, and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our electronic characterization further reveals a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ∼1 electron volt coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species., This research was funded by the Centres de Recerca de Catalunya Programme–Generalitat de Catalunya, the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund. This research was supported by the Spanish Ministry of Economy and Competitiveness (under contract no. MAT2016-78293-C6-2-R, MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, and MAT2016-75952-R and Severo Ochoa no. SEV-2013-0295); the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2014 SGR 715, 2014 SGR 56, and 2017 SGR 827; the Basque Department of Education (contract no. PI-2016-1-0027); and the European Union’s Horizon 2020 research and innovation program under grant agreement 696656. C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically synthesized chevron-like graphene nanoribbons for electrochemical sensors development: determination of epinephrine

  • Sainz, Raquel
  • Pozo, María del
  • Vilas-Varela, Manuel
  • Castro-Esteban, Jesús
  • Pérez Corral, María
  • Vázquez, L.
  • Blanco, Elias
  • Peña, Diego
  • Martín-Gago, José A.
  • Ellis, Gary James
  • Petit-Domínguez, M. Dolores
  • Quintana, Carmen
  • Casero, Elena
We employ chevron-like graphene nanoribbons (GNRs) synthesized by a solution-based chemical route to develop a novel electrochemical sensor for determination of the neurotransmitter epinephrine (EPI). The sensor surface, a glassy carbon electrode modified with GNRs, is characterized by atomic force microscopy, scanning electron microscopy and Raman spectroscopy, which show that the electrode surface modification comprises of bi-dimensional multilayer-stacked GNRs that retain their molecular structure. The charge transfer process occurring at the electrode interface is evaluated by electrochemical impedance spectroscopy. The sensor is applied to the determination of EPI, employing as an analytical signal the reduction peak corresponding to the epinephrinechrome–leucoepinephrinechrome transition (E = − 0.25 V) instead of the oxidation peak usually employed in the literature (E = + 0.6 V) in order to minimize interferences. The results obtained demonstrate that chevron-like nanoribbons synthesized by solution methods exhibit reliable electrocatalytic activity for EPI determination. Using differential pulse voltammetry, we obtain a linear concentration range from 6.4 × 10 to 1.0 × 10 M and a detection limit of 2.1 × 10 M. The applicability of the sensor was evaluated by determining EPI in pharmaceutical samples with satisfactory results., Te authors acknowledge fnancial support from the Spanish MICINN (MAT2017-85089-C2-1-R, MAT2017- 85089-C2-2-R), MINECO (MAT2016-78293-C6-3-R), the Comunidad Autónoma de Madrid (P2018/NMT-4349 TRANSNANOAVANSENS-CM, S2013/MIT-3029, PEJD-2017/IND4130), the Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09) and Fondo Europeo de Desarrollo Regional (FEDER). We thank I. Ballesteros for the SEM measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A large starphene comprising pentacene branches

  • Holec, Jan
  • Cogliati, Beatrice
  • Lawrence, James
  • Berdonces-Layunta, Alejandro
  • Herrero-Gómez, P.
  • Nagata, Yuuya
  • Banasiewicz, Marzena
  • Kozankiewicz, Boleslaw
  • Corso, Martina
  • Oteyza, Dimas G. de
  • Jancarik, Andrej
  • Gourdon, André
Starphenes show promising optoelectronic properties. Notably, HOMO–LUMO energy gap presumably decreases with their increasing size, making larger homologues extremely desirable. Unfortunately, with the size, their instability and insolubility also increase, challenging classical synthetic ways. A new method has been developed, enabling synthesis of large starphenes in a quantity sufficient for their full characterisation and further applications., Starphenes are attractive compounds due to their characteristic physicochemical properties that are inherited from acenes, making them interesting compounds for organic electronics and optics. However, the instability and low solubility of larger starphene homologs make their synthesis extremely challenging. Herein, we present a new strategy leading to pristine [16]starphene in preparative scale. Our approach is based on a synthesis of a carbonyl-protected starphene precursor that is thermally converted in a solid-state form to the neat [16]starphene, which is then characterised with a variety of analytical methods, such as 13C CP-MAS NMR, TGA, MS MALDI, UV/Vis and FTIR spectroscopy. Furthermore, high-resolution STM experiments unambiguously confirm its expected structure and reveal a moderate electronic delocalisation between the pentacene arms. Nucleus-independent chemical shifts NICS(1) are also calculated to survey its aromatic character., This research has been funded in parts by foundation EXPERIENTIA, ERDF/ESF “UOCHB MSCA Mobility” (No. CZ.02.2.69/0.0/0.0/17 050/0008490), and has received funding from the EraNET Cofund Initiatives Quan-tERA under the European Union's Horizon 2020 research and innovation programme grant agreement ORQUID. This project has received financial support from the CNRS through the MITI interdisciplinary programs and JST-ERATO (No. JPMJER1903) and JSPS-WPI. Financial support is also acknowledged from the Spanish Ministry of Science and Innovation (MAT2016-78293-C6, PID2019-107338RB-C63), from the Basque Government (IT-1255-19), from the Spanish National Research Council (CSIC, COOPB20432), from the Euro-pean Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNSI) and from the European Research Council (grant agreement no. 635919). The authors thank Yannick Coppel (LCC-CNRS, Toulouse) for recording CP-MAS spectra, Jean-Francois Meunier (LCC-CNRS, Toulouse) for thermogravimetric analysis and Vladimir Vrkoslav (IOCB-Prague) for recording MS MALDI spectra., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bottom-up synthesis of multifunctional nanoporous graphene

  • Moreno, Cesar|||0000-0003-2682-211X
  • Vilas Varela, Manuel
  • Kretz, Bernhard
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Paradinas, Markos|||0000-0003-1006-9506
  • Panighel, Mirco|||0000-0001-8413-5196
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
Nanosize pores can turn semimetallic graphene into a semiconductor and, from being impermeable, into the most efficient molecular-sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the 1-nanometer range. The size, density, morphology, and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our electronic characterization further reveals a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ∼1 electron volt coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species.