Pasar al contenido principal

DISPOSITIVOS DE NANOHILOS DE SILICIO PARA LA DETECCION ULTRA SENSIBLE DE MARCADORES DE ENFERMEDADES

MAT2013-44858-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subsurface imaging of silicon nanowire circuits and iron oxide nanoparticles with sub-10 nm spatial resolution

  • Perrino, Alma P.
  • Ryu, Y. K.
  • Amo, Carlos A.
  • Morales, María Del Puerto
  • García García, Ricardo
Non-destructive subsurface characterization of nanoscale structures and devices is of significant interest in nanolithography and nanomanufacturing. In those areas, the accurate location of the buried structures and their nanomechanical properties are relevant for optimization of the nanofabrication process and the functionality of the system. Here we demonstrate the capabilities of bimodal and trimodal force microscopy for imaging silicon nanowire devices buried under an ultrathin polymer film. We resolve the morphology and periodicities of silicon nanowire pairs. We report a spatial resolution in the sub-10 nm range for nanostructures buried under a 70 nm thick polymer film. By using numerical simulations we explain the role of the excited modes in the subsurface imaging process. Independent of the bimodal or trimodal atomic force microscopy approach, the fundamental mode is the most suitable for tracking the topography while the higher modes modulate the interaction of the tip with the buried nanostructures and provide subsurface contrast., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM), the Ministerio de Economía y Competitividad (Spain) under grants MAT2013-44858-R, CSD2010-00024 and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct fabrication of thin layer MoS2 field-effect nanoscale transistors by oxidation scanning probe lithography

  • Espinosa, Francisco M.
  • Ryu, Y. K.
  • Marinov, Kolyo
  • Dumcenco, Dumitru
  • Kis, Andras
  • García García, Ricardo
Thin layer MoS2-based field effect transistors (FET) are emerging candidates to fabricate very fast and sensitive devices. Here, we demonstrate a method to fabricate very narrow transistor channel widths on a single layer MoS2 flake connected to gold electrodes. Oxidation scanning probe lithography is applied to pattern insulating barriers on the flake. The process narrows the electron path to about 200 nm. The output and transfer characteristics of the fabricated FET show a behavior that is consistent with the minimum channel width of the device. The method relies on the direct and local chemical modification of MoS2. The straightforward character and the lack of specific requirements envisage the controlled patterning of sub-100 nm electron channels in MoS2 FETs., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM), the Ministerio de Economía y Competitividad (Spain) under Grant No. MAT2013-44858-R, the Marie Curie ITN network “MoWSeS” (Grant No. 317451) and the Swiss SNF Sinergia Grant No. 147607., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sub-20 nm patterning of thin layer WSe2 by scanning probe lithography

  • Dago, Arancha I.
  • Ryu, Y. K.
  • García García, Ricardo
The electronic properties of thin layer transition metal dichalcogenides have raised considerable interest in the fabrication of advanced field-effect transistors and ultrasensitive sensors. Downscaling those devices to the nanoscale depends on the development of cost-effective and robust alternative nanolithographies. Here we demonstrate the direct, resist-less and reproducible nanopatterning of tungsten diselenide thin layers. By using oxidation scanning probe lithography (o-SPL) we have generated arrays of dots with a width of 13 nm and periodicity of 40 nm. We have also patterned a point contact of 35 nm and a nanoscale field-effect transistor. The direct and resistless fabrication of WSe2 nanoscale devices by oxidation scanning probe lithography opens a straightforward and reliable method for processing transition metal dichalcogenides materials., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM) and the Ministerio de Economía y Competitividad (Spain) under Grant No. MAT2013-44858-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced oxidation scanning probe lithography

  • Ryu, Y. K.
  • García García, Ricardo
Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (o-SPL) is the only lithography that enables the direct and resist-less nanoscale patterning of a large variety of materials, from metals to semiconductors; from self-assembled monolayers to biomolecules. Oxidation SPL has also been applied to develop sophisticated electronic and nanomechanical devices such as quantum dots, quantum point contacts, nanowire transistors or mechanical resonators. Here, we review the principles, instrumentation aspects and some device applications of o-SPL. Our focus is to provide a balanced view of the method that introduces the key steps in its evolution, provides some detailed explanations on its fundamentals and presents current trends and applications. To illustrate the capabilities and potential of o-SPL as an alternative lithography we have favored the most recent and updated contributions in nanopatterning and device fabrication., This work was funded by the European Union FP7/2007-2013 under Grant Agreement No. 318804 (SNM) and the Ministerio de Economía y Competitividad (Spain) under grants MAT2013-44858-R, MAT2015-69725-REDT and MAT2016-76507-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced scanning probe lithography

  • García García, Ricardo
  • Knoll, Armin W.
  • Riedo, Elisa
The nanoscale control afforded by scanning probe microscopes has prompted the development of a wide variety of scanning-probe-based patterning methods. Some of these methods have demonstrated a high degree of robustness and patterning capabilities that are unmatched by other lithographic techniques. However, the limited throughput of scanning probe lithography has prevented its exploitation in technological applications. Here, we review the fundamentals of scanning probe lithography and its use in materials science and nanotechnology. We focus on robust methods, such as those based on thermal effects, chemical reactions and voltage-induced processes, that demonstrate a potential for applications., Financial support from the European Research Council AdG no. 340177 (R.G.) and StG no. 307079 (A.W.K.), the European Commission FP7-ICT-2011 no. 318804 (R.G. and A.W.K.), the Swiss National Science Foundation SNSF no. 200020-144464 (A.W.K.), the Ministerio de Economía y Competitividad MAT2013-44858-R (R.G.), the National Science Foundation CMMI-1100290 (E.R.), the MRSEC program DMR-0820382 (E.R.) and the Office of Basic Energy Sciences of the Department of Energy DE-SC0002245 (E.R.) are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Albumin (BSA) adsorption over graphene in aqueous environment: influence of orientation, adsorption protocol, and solvent treatment

  • Vilhena, J. G.
  • Rubio-Pereda, Pamela
  • Vellosillo, Perceval
  • Serena, Pedro A.
  • Pérez, Rubén
[EN] We report 150 ns explicit solvent MD simulations of the adsorption on graphene of albumin (BSA) in two orientations and using two different adsorption protocols, i.e., free and forced adsorption. Our results show that free adsorption occurs with little structural rearrangements. Even taking adsorption to an extreme, by forcing it with a 5 nN downward force applied during the initial 20 ns, we show that along a particular orientation BSA is able to preserve the structural properties of the majority of its binding sites. Furthermore, in all the cases considered in this work, the ibuprofen binding site has shown a strong resilience to structural changes. Finally, we compare these results with implicit solvent simulations and find that the latter predicts an extreme protein unfolding upon adsorption. The origin of this discrepancy is attributed to a poor description of the water entropic forces at interfaces in the implicit solvent methods., We acknowledge the financial support from the Spanish MINECO (projects Consolider Force-For-Future CSD2010-00024, MAT2011-023627, MAT2012-2448, FIS2012-36113-C03-03, MAT2013-44858-R, and MAT2014-54484-P) and Comunidad de Madrid (S2009/MAT-1467), and also the computer resources, technical expertise, and assistance provided by the Red Española de Supercomputación at the Minotauro Supercomputer (BSC, Barcelona) and the Extremadura Research Centre for Advanced Technologies (CETA-CIEMAT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption orientations and immunological recognition of antibodies on graphene

  • Vilhena, J. G.
  • Dumitru, Andra C.
  • Herruzo, E. T.
  • Mendieta-Moreno, Jesús I.
  • García García, Ricardo
  • Serena, Pedro A.
  • Pérez, Rubén
Large-scale molecular dynamics (MD) simulations and atomic force microscopy (AFM) in liquid are combined to characterize the adsorption of Immunoglobulin G (IgG) antibodies over a hydrophobic surface modeled with a three-layer graphene slab. We consider explicitly the water solvent, simulating systems with massive sizes (up to 770000 atoms), for four different adsorption orientations. Protocols based on steered MD to speed up the protein diffusion stage and to enhance the dehydration process are combined with long simulation times (>150 ns) in order to make sure that the final adsorption states correspond to actual stable configurations. Our MD results and the AFM images demonstrate that the IgG antibodies are strongly adsorbed, do not unfold, and retain their secondary and tertiary structures upon deposition. Statistical analysis of the AFM images shows that many of the antibodies adopt vertical orientations, even at very small coverages, which expose at least one Fab binding site for recognition events. Single molecule force spectroscopy experiments demonstrate the immunological response of the deposited antibodies by recognizing its specific antigens. The above properties together with the strong anchoring and preservation of the secondary structure, make graphene an excellent candidate for the development of immunosensors., We thank the financial support from the Spanish MINECO (projects Consolider Force-For-Future CSD2010-00024, MAT2011-023627, MAT2013-44858-R, FIS2012-36113-C03-03, and MAT2014-54484-P), and from Comunidad de Madrid (S2009/MAT-1467)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Albumin (BSA) adsorption onto graphite stepped surfaces

  • Rubio-Pereda, Pamela
  • Vilhena, J. G.
  • Takeuchi, Noboru.
  • Serena, Pedro A.
  • Pérez, Rubén
Nanomaterials are good candidates for the design of novel components with biomedical applications. For example, nano-patterned substrates may be used to immobilize protein molecules in order to integrate them in biosensing units. Here, we perform long MD simulations (up to 200 ns) using an explicit solvent and physiological ion concentrations to characterize the adsorption of bovine serum albumin (BSA) onto a nano-patterned graphite substrate. We have studied the effect of the orientation and step size on the protein adsorption and final conformation. Our results show that the protein is stable, with small changes in the protein secondary structure that are confined to the contact area and reveal the influence of nano-structuring on the spontaneous adsorption, protein-surface binding energies, and protein mobility. Although van der Waals (vdW) interactions play a dominant role, our simulations reveal the important role played by the hydrophobic lipid-binding sites of the BSA molecule in the adsorption process. The complex structure of these sites, that incorporate residues with different hydrophobic character, and their flexibility are crucial to understand the influence of the ion concentration and protein orientation in the different steps of the adsorption process. Our study provides useful information for the molecular engineering of components that require the immobilization of biomolecules and the preservation of their biological activity., We acknowledge the financial support from the Spanish MINECO (Project Nos Consolider Force-For-Future CSD2010-00024, MAT2011-023627, MAT2012-2448, FIS2015-69295-C3-1-P, MAT2013-44858-R, and MAT2014-54484-P) and Comunidad de Madrid (No. S2009/MAT-1467), and also the computer resources, technical expertise, and assistance provided by the Red Española de Supercomputación at the Minotauro Supercomputer (BSC, Barcelona) and the Extremadura Research Centre for Advanced Technologies (CETA-CIEMAT). P. Rubio-Pereda acknowledges support from CONACyT under scholarship No. 242867.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mapping stress in polycrystals with sub-10 nm spatial resolution

  • Polop, Celia
  • Vasco Matías, Enrique
  • Perrino, Alma P.
  • García García, Ricardo
From aircraft to electronic devices, and even in Formula One cars, stress is the main cause of degraded material performance and mechanical failure in applications incorporating thin films and coatings. Over the last two decades, the scientific community has searched for the mechanisms responsible for stress generation in films, with no consensus in sight. The main difficulty is that most current models of stress generation, while atomistic in nature, are based on macroscopic measurements. Here, we demonstrate a novel method for mapping the stress at the surface of polycrystals with sub-10 nm spatial resolution. This method consists of transforming elastic modulus maps measured by atomic force microscopy techniques into stress maps via the local stress-stiffening effect. The validity of this approach is supported by finite element modeling simulations. Our study reveals a strongly heterogeneous distribution of intrinsic stress in polycrystalline Au films, with gradients as high as 100 MPa nm near the grain boundaries. Consequently, our study discloses the limited capacity of macroscopic stress assessments and standard tests to discriminate among models, and the great potential of nanometer-scale stress mapping., Financial support was provided by the Ministerio de Economía y Competitividad (grants MAT2014-52477-C5-5-P to CP and EV; CSD2010-00024 and MAT2013-44858-R to RG) and by the European Research Council (grant ERC-AdG-340177, 3DNanoMech, to RG).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Angstrom-resolved metal-organic framework-liquid interfaces

  • Chiodini, Stefano
  • Reinares-Fisac, Daniel
  • Espinosa, Francisco M.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
  • García García, Ricardo
Metal-organic frameworks (MOFs) are a class of crystalline materials with a variety of applications in gas storage, catalysis, drug delivery or light harvesting. The optimization of those applications requires the characterization of MOF structure in the relevant environment. Dynamic force microscopy has been applied to follow dynamic processes of metal-organic-framework material. We provide images with spatial and time resolutions, respectively, of angstrom and seconds that show that Ce-RPF-8 surfaces immersed in water and glycerol experience a surface reconstruction process that is characterized by the diffusion of the molecular species along the step edges of the open terraces. The rate of the surface reconstruction process depends on the liquid. In water it happens spontaneously while in glycerol is triggered by applying an external force., We thank the financial support from the European Research Council ERC – AdG – 340177 (3DNanoMech) and the Ministerio de Economía y Competitividad (MINECO) (MAT2016-76507-R, MAT2013-44858-R, MAT2016-78465-R, and CTQ2014-61748-EXP). F.G. acknowledges financial support by MINECO (Programa Ramón y Cajal).