Pasar al contenido principal

ROL OF DEFECTOS CRISTALINOS EN LAS PROPIEDADES ELECTRICAS-MAGNETICAS-OPTICAS A MEDIDA EN CERAMICAS MONO Y MULTIFERROICAS

MAT2010-21088-C03-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Immobilization of polyoxometalates on tailored polymeric surfaces

  • Aguado-Ureta, Saioa
  • Rodríguez-Hernández, Juan
  • Campo, Adolfo del
  • Pérez-Álvarez, Leyre
  • Ruiz-Rubio, Leire
  • Vilas, José Luis
  • Artetxe, Beñat
  • Reinoso, Santiago
  • Gutiérrez Zorrilla, Juan M.
Herein we describe the preparation of hybrid polymer–inorganic interfaces by the immobilization of polyoxometalate nanoclusters on functionalized polymer surfaces. The polymeric surfaces were made of polystyrene-b-poly(acrylic acid)/polystyrene (PS-b-PAA/PS) blends by spin coating on a silicon wafer. The functionalization of the polymer film was obtained by interfacial migration of the amphiphilic block copolymer toward the interface upon water vapor annealing. The carboxylic acid functional groups contained in the PAA block were then employed to anchor the [LnIII(α-SiW11O39)]5− polyoxometalates (Ln: Ce, Er). This purpose was achieved by immersing the films in aqueous solutions of the in situ-formed inorganic nanoclusters. X-ray photoelectron and confocal Raman spectroscopies, together with atomic force microscopy, confirmed the immobilization of the inorganic species at the interface., This work has been financially supported by MINECO (grants MAT2010-17016 and MAT2010-21088-C03-01) and EJ/GV (IT477-10 and IT718-13; and ELKARTEK program (ACTIMAT)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilization of Polyoxometalates on Tailored Polymeric Surfaces

  • Aguado-Ureta, Saioa
  • Rodríguez-Hernández, Juan
  • Campo, Ángel Adolfo del
  • Perez-Álvarez, Leyre
  • Ruiz-Rubio, Leire
  • Vilas, José Luis
  • Artetxe, Beñat
  • Reinoso, Santiago
  • Gutiérrez-Zorrilla, Juan M.
Herein we describe the preparation of hybrid polymer–inorganic interfaces by the immobilization of polyoxometalate nanoclusters on functionalized polymer surfaces. The polymeric surfaces were made of polystyrene-<i>b</i>-poly(acrylic acid)/polystyrene (PS-<i>b</i>-PAA/PS) blends by spin coating on a silicon wafer. The functionalization of the polymer film was obtained by interfacial migration of the amphiphilic block copolymer toward the interface upon water vapor annealing. The carboxylic acid functional groups contained in the PAA block were then employed to anchor the [Ln<sup>III</sup>(α-SiW<sub>11</sub>O<sub>39</sub>)]<sup>5−</sup> polyoxometalates (Ln: Ce, Er). This purpose was achieved by immersing the films in aqueous solutions of the in situ-formed inorganic nanoclusters. X-ray photoelectron and confocal Raman spectroscopies, together with atomic force microscopy, confirmed the immobilization of the inorganic species at the interface., This work has been financially supported by MINECO (grants MAT2010-17016 and MAT2010-21088-C03-01) and EJ/GV (IT477-10 and IT718-13; and ELKARTEK program (ACTIMAT)). The authors thank UPV/EHU for financial support (UFI11/53). S.A.-U. is indebted to UPV/EHU for her pre-doctoral fellowship. Technical and human support provided by SGIker (UPV/EHU) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

  • Sanz de León, Alberto
  • Campo, Ángel Adolfo del
  • Fernández-García, Marta
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS 40-b-P(PEGMA300) 48), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS 21-b-PS 31), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly. © 2012 American Chemical Society., This work was financially supported by the MINECO (ProjectsMAT2010-17016, MAT2010-21088-C03-01, and COST Ac-tion MP0904 SIMUFER). A. Muñoz-Bonilla gratefully acknowledges the MINECO for her Juan de la Cierva postdoctoral contract, and A. S. de León thanks the MECD for his FPU predoctoral fellowship. Authors thank Dr. M.Hoyos for his valuable discussions on the coffee stain effect.The synchrotron work leading to these results was performed at DESY and received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 312284. We are grateful for collaboration of the Hasylab personnel, especially Dr. S. S. Funari
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of structured porous films by breath figures and phase separation processes: Tuning the chemistry and morphology inside the pores using click chemistry

  • Sanz de León, Alberto
  • Campo, Ángel Adolfo del
  • Fernández-García, Marta
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
Herein, a facile water-assisted templating technique, the so-called breath figures method, in combination with phase separation process, was employed to prepare multifunctional micropatterned films. Tetrahydrofuran solutions of incompatible ternary blends consisting of high-molecular-weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS40-b-P(PEGMA300)48), and a fluorinated homopolymer, poly(2,3,4,5,6-pentafluorostyrene) (P5FS21) were casted under humid atmosphere varying the proportion of the components. Two simultaneously occurring processes, i.e., the breath figures mechanism and the phase separation process, lead to unprecedented morphologies that could be tuned by simply varying the relative humidity or the composition of the blend. Confocal micro-Raman spectroscopy served to provide information about the location and distribution of the different functionalities in the films. As a result, both the amphiphilic block copolymer and the fluorinated polymer were mainly located in the cavities. Above a certain percentage of relative humidity, honeycomb structured films were obtained in which the block copolymer is distributed on the edge of the pore as a result of the affinity by the condensing water droplet and the coffee stain effect. The homopolymer is also preferentially situated at the pore edge, but forming spherical domains with narrow polydisperse sizes. Moreover, thiolated glucose molecules were specifically attached to the P5FS21 domains via thiol-para fluorine "click" reaction. Subsequently, the specific lectin (Concanavalin A, Canavalia ensiformis) was attached to the surface by conjugation with the glucose moieties. The successful binding of the Con A was demonstrated by the fluorescence, observed exclusively at the areas where P5FS21 domains are located. This nonlithographic method opens a new route to fabricate a huge variety of microstructured polymer films in terms of morphology not only for protein patterning, as illustrated in this manuscript, but also to produce a diversity of functional group arrangements. © 2013 American Chemical Society., This work was financially supported by the MINECO (Projects MAT2010-17016, MAT2010-21088-C03-01, and COST Action MP0904 SIMUFER). A M.-B. gratefully acknowledges the MINECO for her Juan de la Cierva postdoctoral contract and A.S.d.L. thanks the Ministerio de Educacion for his FPU ́ predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the chemistry outside the pores in honeycomb patterned films

  • Sanz de León, Alberto
  • Campo, Ángel Adolfo del
  • Labrugère, Christine
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Rodríguez-Hernández, Juan
We report the selective functionalization of the external surface in honeycomb structured porous films while maintaining the functionality of the pores. For this purpose, we describe the preparation of polymer films from blends of polystyrene (PS) and polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (PS-b-P5FS) by the breath figures approach. The diblock copolymer resulted to be homogeneously distributed along the whole surface of the films as a consequence of the reorientation towards the solution-air interface. The porous films obtained have a wetting behavior that can be described by the Cassie-Baxter state equations. This particular effect allowed us to modify the chemical composition of the film surface whilst the interior of the pores does not vary. As a proof of concept, we report the modification of the surface using "click" chemistry. Thiolated glucose molecules were attached specifically to the poly(2,3,4,5,6-pentafluorostyrene) domains via thiol-para fluorine "click" reaction. The kinetics of this reaction and the possibility to participate in recognition processes have been evaluated by contact angle measurements, X-ray photoelectron spectroscopy and fluorescence microscopy. © 2013 The Royal Society of Chemistry., This work was Financially supported by the MINECO (Projects MAT2010-17016, MAT2010-21088-C03-01 and COST Action MP0904 SIMUFER). A. Munoz-Bonilla gratefully acknowledges ~ the MICINN for the Juan de la Cierva postdoctoral contract and A.S. de León thanks the MECD for the FPU predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sintering behaviour and translucency of dense Eu2O3 ceramics

  • Quesada, Adrián
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
[EN] Eu2O3 ceramics have been obtained at sintering temperatures of between 1000°C and 1550°C. X-ray diffraction and scanning electron microscopy, in combination with dilatometry experiments, allowed understanding the sintering behaviour. Moderate grain growth followed an efficient densification process between 1400°C and 1550°C, which yielded high-density ceramics with an average grain size of 4μm. The ceramics had Young modulus of 125GPa, in agreement with the previously published data. The dense Eu2O3 ceramics were translucent (35.1% transmittance at 800nm of 0.8mm thick discs), showing in addition a slightly pink colour. We propose that the combination of high density and an average grain size of 4μm is responsible for this novel functionality. © 2014 Elsevier Ltd., Financial support from the Spanish Ministerio de Economía y Competitividad through the Juan de la Cierva programme and through Project MAT2010-21088-C03-01.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system

  • Rubia, Miguel Ángel de la
  • Jiménez Reinosa, Julián
  • Leret, Pilar
  • Romero Fanego, Juan José
  • Frutos, Javier
  • Fernández Lozano, José Francisco
Eutectic temperature and composition in the CuO-TiO2 pseudobinary system have been experimentally determined in air by means differential thermal analysis (DTA), thermogravimetry (TG) and hot-stage microscopy (HSM). Samples of the new eutectic composition treated at different temperatures have been characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structural spectroscopy (XANES) to identify phases and to determine the Cu valence state, respectively. The results show that the eutectic temperature in air is higher by 100°C (∼1000°C) for a Ti-richer composition (XTiO2=25 mol%) than the one calculated in the literature. The reduction of Cu2+ to Cu+ takes places at about 1030°C. The existence of Cu2TiO3 and Cu3TiO4 has been confirmed by XRD in the temperature range between 1045 and 1200°C. © 2011 Elsevier Ltd., We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and we would like to thank to Ivan da Silva for assistance in using beamline 25 (SPLINE), to L. Contreras of ICV (CSIC) and to the project MAT 2010-21088-C03-01 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper based hydrophobic ceramic nanocoating

  • Jiménez Reinosa, Julián
  • Romero Fanego, Juan José
  • Jaquotot, P.
  • Bengochea, M.A.
  • Fernández Lozano, José Francisco
A mechanism for the development of nanocoatings for the tiles industry by using copper nanoparticles has been proposed. A standard processing procedure in which ceramics were fast-firing at 1200°C in air atmosphere simulating an industrial process was followed. The ceramic nanocoating was multifunctional having shine metallic aspect and hydrophobic characteristics. The surface crystallizations were studied by X-ray diffraction and corresponded to copper oxide nanocrystals. The hydrophobic response was based in the nanoroughness of the surface and correlated with the Cu+/Cu2+ ratio as determined by XANES. The cellular nano microstructure look biomimetic with the one of hydrophobic leafs. The development of the cellular nano microstructure was based on the Rayleigh-Bernard cells of a saturated glass during cooling in which thermal convection currents allow the crystallization of nanoparticles at the surface of the glass. © 2011 Elsevier Ltd., The authors are grateful to I. Lorite and P. Leret for their collaboration and discussion, and to M. Parrondo for his help in the figure of models. They are also grateful to F. Jimenez-Villacorta and J. A. Gallastegui for their very valuable help about the measurements in ESRF. Finally the authors would like to thank to the projects MAT2010-21088-C03-01 and CENIT DOMINO for the financial support., Appendix A. Supplementary data (Video), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High spatial resolution structure of (K,Na)NbO 3 lead-free ferroelectric domains

  • Rubio Marcos, Fernando
  • Campo, Ángel Adolfo del
  • López-Juárez, Rigoberto
  • Romero Fanego, Juan José
  • Fernández Lozano, José Francisco
In this paper, we highlight some practical aspects in the study of ferroelectric domains in lead-free (K,Na)NbO <inf>3</inf> piezoceramics. This work presents and discusses the spatial resolved structure of the ferroelectric domain existing in (K,Na)NbO <inf>3</inf> based ceramics studied by confocal Raman microscopy (CRM) coupled with atomic force microscopy. In addition to the domain identification, CRM allows a determination of the nature of domain walls and correlation between the structure and piezoelectric properties. The tetragonal constraint for orthorhombic domain formations is demonstrated by this technique. Alternating polarization differences in 180° domain templates are resolved by 60° and 120° domains. The internal stress results in the appearance of an unusual polarization relaxation at the 90° domain wall in (K,Na)NbO <inf>3</inf> ceramics. Finally, the implications of the present findings introduce a fruitful discussion in the search for effective structures to improve the piezoelectric response and represent the key point to design new domains that allow engineering the piezoelectric response. © 2012 The Royal Society of Chemistry., The authors kindly acknowledge financial support from the MICINN project MAT 2010-21088-C03-01 and COST Action MP0904 SIMUFER. R. López-Juárez expresses his thanks to PAPIIT-UNAM, for supporting this research under project number IN116610-3, also to CONACyT-México for providing a PhD scholarship., Peer reviewed