Pasar al contenido principal

ECOSISTEMA SIESTA DE TECNICAS DE SIMULACION DE MATERIALES (SIESTA-ICMAB)

PID2022-139776NB-C61

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Twisting Between Topological Phases in 1D Conjugated Polymers via a Multiradical Transition State

  • Alcón, Isaac|||0000-0002-7569-2000
  • Canonico, Luis M.|||0000-0001-9266-7213
  • Papior, Nick|||0000-0003-3038-1855
  • Garcia, José H.|||0000-0002-5752-4759
  • Cummings, Aron|||0000-0003-2307-497X
  • Tremblay, Jean Christophe|||0000-0001-8021-7063
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Brandbyge, Mads|||0000-0002-0126-9824
  • Paulus, Beate|||0000-0002-9834-4949
  • Roche, Stephan|||0000-0003-0323-4665
In recent years, it has become possible via on-surface bottom-up synthesis to engineer the topological character of carbon nanostructures. Graphene nanoribbons and 1D conjugated polymers (1DCPs) have thus tailored so as to host either topologically trivial or non-trivial phases. Molecular design is the primary means to set the topological class of these nanomaterials. However, external control over topology is also demonstrated via electric fields or top-down hydrogenation. Inspired by the connection between topology and π-conjugation, here it is demonstrated via first-principles calculations that aryl ring twist angles also serve as topological knobs. Focusing on rationally designed 1DCPs composed of triarylmethyl (TAM) units, it is shown that rotation of certain aryl rings enables a transition from the trivial to the topologically non-trivial phase. Accordingly, fixing a particular twist angle configuration (e.g., via chemical functionalization) is equivalent to robustly setting a targeted topological phase. It is also found that in considered 1DCPs, the quantum phase transition occurs without the electronic band gap closing, due to a multiradical antiferromagnetic phase emerging at the transition point. All in all, this study highlights the potential of aryl ring twisting for engineering topological properties in carbon nanomaterials and establishes TAM 1DCPs as exotic topological 1D systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4 W12 O44, γ - and η-Mo4 O11

  • Guster, Bogdan|||0000-0003-1305-1862
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Pouget, Jean-Paul|||0000-0002-6244-389X
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids γ-Mo4O11 and P4W12O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three t2g orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4W12O44 and four for γ-Mo4O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for γ-Mo4O11 and P4W12O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in η-Mo4O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insulator-to-metal transition in low-dimensional NbS3 under pressure

  • Conejeros, Sergio
  • Alemany, Pere
  • Canadell, Enric
A first-principles study of the insulator-to-metal transition under pressure in NbS3 is reported. In contrast with previous proposals, it is found that the transition is not due to a progressive closing of the initial band gap but to the inversion of the relative stability of two different polymorphs under pressure. The Fermi surface of the new metallic state under low pressure (polymorph V′) is discussed, and the possible occurrence of as yet unknown incommensurate phases is suggested. The reason for the inversion of stability of the two polymorphs is discussed., This work was supported by Spanish MICIU (Grants No. PID2022-139776NB-C61 and No. PID2021-128217NB-I00) and Generalitat de Catalunya (Grants No. 2021SGR01519 and No. 2021SGR00286). E.C. acknowledges the support of the Spanish MICIU through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction. P.A. acknowledges the support from the Maria de Maeztu Units of Excellence Program (CEX2021-001202-M) and the MEC-ANID program (Grant No. 80190101) for a stay at the Universidad Católica del Norte. S.C. was supported by FONDECYT, Chile (project 1221697) and was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02). S.C. would also like to thank “Núcleo de modelación y simulación científica (NMSC)” No. 7 UCN-VRIDT 076/2020, and “Núcleo de materiales funcionales” No. 8 UCN-VRIDT 076/2020 for scientific support. We thank Professor V. Pokrovskii for communication of unpublished results., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reviving BVDT-TTF and EVT-TTF salts

  • Solano, Federica
  • Auban-Senzier, Pascale
  • Barszcz, Bolesław
  • Frackowiak, Arkadiusz
  • Olejniczak, Iwona
  • Alemany, Pere
  • Canadell, Enric
  • Zigon, Nicolas
  • Avarvari, Narcis
Herein are reported the synthesis, in-depth structural description and conducting properties of various salts of the symmetric bis-vinylenedithio-tetrathiafulvalene (BVDT-TTF) and dissymmetric ethylene-vinylenedithio-tetrathiafulvalene (EVT-TTF). Compared to the omnipresent bis-ethylenedithio-tetrathiafulvalene (BEDT-TTF) these two closely related and easily synthesizable organic donors have been reported ca. 200 times less in the literature. Four new structures of organic conductors are herein investigated and analysed through a battery of techniques, including X-ray analysis on single-crystals, conductivity measurements, Raman spectroscopy and band structure calculations. All materials exhibit semiconducting behaviours with conductivities in the 10−3 to 10−1 S cm−1 range at RT and ambient pressure. The impact of the structural or electronic disorder on the conductivity and dimensionality of the salts is examined., This work was supported in France by the CNRS and the University of Angers (PhD funding to F. S.). N. A., I. O., and A. F. thank the Narodowa Agencja Wymiany Akademickiej – NAWA (Poland, BPN/BFR/2021/1/00001/U/00001) and the French Ministry of Foreign Affairs and the French Ministry of Education and Research (France, PHC Project 48119PG) for financial support through the bilateral Polonium project. The work in Poland was supported within the Statutory Activities of the Institute of Molecular Physics Polish Academy of Sciences. The work in Spain was supported by MICIU through Grants PID2022-139776NB-C61 and PID2021-128217NB-I00, Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges the support of the Spanish MICIU through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction and P. A. from the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Structural approach to charge density waves in low-dimensional systems: electronic instability and chemical bonding

  • Pouget, Jean-Paul
  • Canadell, Enric
The charge density wave (CDW) instability, usually occurring in low-dimensional metals, has been a topic of interest for longtime. However, some very fundamental aspects of the mechanism remain unclear. Recently, a plethora of new CDW materials, a substantial fraction of which is two-dimensional or even three-dimensional, has been prepared and characterised as bulk and/or single-layers. As a result, the need for revisiting the primary mechanism of the instability, based on the electron-hole instability established more than 50 years ago for quasi-one-dimensional (quasi-1D) conductors, has clearly emerged. In this work, we consider a large number of CDW materials to revisit the main concepts used in understanding the CDW instability, and emphasise the key role of the momentum dependent electron-phonon coupling in linking electronic and structural degrees of freedom. We argue that for quasi-1D systems, earlier weak coupling theories work appropriately and the energy gain due to the CDW and the concomitant periodic lattice distortion (PLD) remains primarily due to a Fermi surface nesting mechanism. However, for materials with higher dimensionality, intermediate and strong coupling regimes are generally at work and the modification of the chemical bonding network by the PLD is at the heart of the instability. We emphasise the need for a microscopic approach blending condensed matter physics concepts and state-of-the-art first-principles calculations with quite fundamental chemical bonding ideas in understanding the CDW phenomenon in these materials., E C acknowledges support from the Spanish MICIU through Grant PID2022-139776NB-C61 and the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction as well as from Generalitat de Catalunya (2021SGR01519). We thank Prs. S J L Billinge, J Laverock and P A Lee for permission to reproduce their figures. We are grateful to Drs. B Guster, D Boskovic, M Pruneda and P Ordejón for their help with the Lindhard response calculations. We are indebted with B Guster for his disponibility during the preparation of this manuscript. The experimental work reported here is in great part due to many collaborations of J-P P during several decades. Most of the relevant collaborations are quoted in the list of references., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed-ligand, radical, gold bis(dithiolene) complexes: from single-component conductors to controllable NIR-II absorbers

  • Kharraz, Haia
  • Alemany, Pere
  • Canadell, Enric
  • LeGal, Yann
  • Roisnel, Thierry
  • Cui, Hengbo
  • Kim, Kee Hoon
  • Fourmigué, Marc
  • Lorcy, Dominique
Neutral radical bis(dithiolene) gold complexes [Au(dt)2](center dot) are known to exhibit a strong absorption in the 1400-2000 nm NIR absorption range. Here, we demonstrate that the NIR signature of mixed-ligand bis(dithiolene) gold complexes [Au(dtA)(dtD)](center dot) associating two different dithiolene, dtA and dtD, is found at higher energy, out of the range of the homoleptic analogs [Au(dtA)2](center dot) and [Au(dtD)2](center dot), in the looked-after NIR-II 1000-1400 nm absorption range. An efficient synthetic approach towards precursor mixed-ligand monoanionic gold bis(dithiolene) complexes [Au(dtA)(dtD)]-1 is reported. Using this strategy, no symmetrical complexes are formed and, upon electrocrystallization, no scrambling was observed in solution, allowing for the isolation of radical gold bis(dithiolene) complex such as [Au(bdt)(Et-thiazdt)](center dot) (bdt: benzene-1,2-dithiolate; Et-thiazdt: N-ethyl-thiazoline-2-thione-3,4-dithiolate), which behaves as a single-component conductor. It is shown from theoretical calculations that the spin polarization induced by electron repulsions leads to a strong localization of the spin-orbitals, and provides a sound basis to understand, (i) the different ligand-based oxidation potentials, (ii) the NIR optical absorption at notably higher energies and (iii) the larger potential difference of the two redox processes than in the parent symmetric complexes. The solid-state properties of the radical complex [Au(bdt)(Et-thiazdt)](center dot) are the consequence of a strongly 1D electronic structure with weakly dimerized chains and electronic localization favoring a semiconducting behavior, stable under pressures up to 18.2 GPa. Altogether, the versatility of the preparation method of [Au(dtA)(dtD)]-1 salts opens the route for a wide library of different mixed-ligand radical complexes [Au(dtA)(dtD)](center dot) with simultaneously an adaptable absorption in the NIR-II range and the rich structural chemistry of single-component conductors. The NIR absorption of radical, mixed-ligand, gold bis(dithiolene) complexes [Au(dtA)(dtD)](center dot), also used as single component conductors, is found in the looked-after NIR-II 1000-1400 nm absorption range., Financial support from ANR (France) through contract no ANR-23-CE07-0032-01 is acknowledged, as well as PhD grant (to H. K.) from Rennes University. The work at SNU was supported by the NRF through the Quantum Computing Research Infrastructure Construction Program (2022M3K2A1083855) and by the Ministry of Education through the core center Program (2021R1A6C101B418). The work in Spain was supported by MICIU through Grants PID2022-139776NB-C61 and PID2021-128217NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges the support of the Spanish MICIU through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction and P. A. from the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4⁢W12⁢O44, 𝛾- and 𝜂−Mo4⁢O11

  • Guster, Bogdan
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Canadell, Enric
  • Pouget, Jean-Paul
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three 𝑡2⁢𝑔 orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4⁢W12⁢O44 and four for 𝛾−Mo4⁢O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in 𝜂−Mo4⁢O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented., This paper owes much to numerous structural studies on 2D oxides and bronzes by P. Foury-Leylekian (Orsay) to whom we are very indebted. The authors also thank A. Minelli (Oak Ridge) for useful discussions concerning her IXS studies on the MPTB𝑝 and E. Duverger-Nédellec (Bordeaux) for sharing the results of her structural studies. B.G. acknowledges computational resources provided by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique (F.R.S.-FNRS) under Grant No. 2.5020.11 and the Tier-1 Lucia supercomputer of the Walloon Region, infrastructure funded by the Walloon Region under the Grant Agreement No. 1910247. B.G., M.P., and P.O. acknowledge support from Grant No. PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, a way of making Europe and the Severo Ochoa program from Spanish MINECO (Grant No. CEX2021-001214-S). E.C. was supported by Grant No. PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through the Severo Ochoa MaTrans42 (Grant No. CEX2023-0001263-S) Excellence Centre distinction. B.G., M.P., P.O., and E.C. acknowledge support from Generalitat de Catalunya (CERCA program and Grant No. 2021SGR01519)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phonon transport manipulation in TiSe2 via reversible charge density wave melting

  • Raya Moreno, Martí
  • Cazorla, Claudio
  • Canadell, Enric
  • Rurali, Riccardo
Titanium diselenide (TiSe2) is a layered material that under a critical temperature of Tc ≈ 200 K features a periodic modulation of the electron density, known as charge density wave (CDW), which finds applications in quantum information and emerging electronic devices. Here, we present first-principles calculations showing the suppression of the CDW via photoexcitation and consequent stabilization of the undistorted high-temperature phase, in agreement with experimental observations. Interestingly, the unfolded CDW melting is accompanied by a sizable reduction in the thermal conductivity, κ, of up to 25% and a large entropy increase of ~10 J K−1 kg−1. The significant κ variation is almost entirely originated from photoinduced changes in the phonon–phonon scattering processes involving a high-symmetry soft phonon mode. Our results open new possibilities in the design of devices for thermal management and phonon-based logic, and suggest original applications in the of context solid-state cooling., R.R. thanks Maurizia Palummo for the useful discussions. We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grants PID2020-119777GB-I00 and PID2022-139776NB-C61, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. and 2021 SGR 01519. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-1-0012 of the Red Española de Supercomputación (RES)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A highly conducting tetrathiafulvalene-tetracarboxylate based dysprosium(iii) 2D metal-organic framework with single molecule magnet behaviour

  • Manna, Fabio
  • Oggianu, Mariangela
  • Auban Senzier, Pascale
  • Novitchi, Ghenadie
  • Canadell, Enric
  • Mercuri, Maria Laura
  • Avarvari, Narcis
The synthesis and whole characterization by a multitechnique approach of an unprecedented dysprosium(iii) 2D metal organic framework (MOF), involving the redox-active tetrathiafulvalene (TTF)-based linker TTF-tetracarboxylate (TTF-TC), are herein reported. The single-crystal X-ray structure, formulated as [Dy6(TTF-TC)5(H2O)22]·21H2O (1), reveals a complex 2D topology, with hexanuclear Dy6 clusters as secondary building units (SBUs) interconnected by five linkers, stacked almost parallel in each layer and eclipsed along the [111] direction, leading to the formation of 1D channels filled by water molecules. The mixed valence of the TTF units is confirmed by both bond distance analysis, Raman microscopy and diffuse reflectance spectroscopy, and further supported by band structure calculations, which also predict activated conductivity for this material. Thanks to efficient TTF stacking and partial oxidation, 1 shows semiconducting behavior, with, however, a record conductivity value of 1 mS cm-1 at room temperature, when compared to the previously reported TTF-based MOFs. Furthermore, temperature and magnetic field dependent ac (alternative current) magnetic susceptibility measurements demonstrate field induced slow relaxation of magnetization, accounting for two independent relaxation processes, with an energy barrier (U eff/K) of around 12 K, typical for dysprosium carboxylate complexes. The herein reported 2D Dy-MOF provides a valuable master plan for coexistence of conducting π-TTF stacks and highly anisotropic DyIII SMM properties., This work was supported in France by the CNRS and the University of Angers. This research was funded in Italy by Fondazione di Sardegna, Convenzione Triennale tra la Fondazione di Sardegna e gli Atenei Sardi, Regione Sardegna, L.R. 7/2007 annualità 2022, project VOC_3D “3D printed optical VOC sensors for indoor air quality evaluation” CUP F73C23001590007. E.C. acknowledges support from the Spanish MICIU through Grant PID2022-139776NB-C61 and the Severo Ochoa FUNFUTURE (CEX2019-000917-S) Excellence Centre distinction as well as from Generalitat de Catalunya (2021SGR01519)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4W12O44, γ- and η-Mo4O11

  • Guster, Bogdan
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Canadell, Enric
  • Pouget, Jean-Paul
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three 𝑡2⁢𝑔 orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4⁢W12⁢O44 and four for 𝛾−Mo4⁢O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in 𝜂−Mo4⁢O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented., B.G. acknowledges computational resources provided by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique (F.R.S.-FNRS) under Grant No. 2.5020.11 and the Tier-1 Lucia supercomputer of the Walloon Region, infrastructure funded by the Walloon Region under the Grant Agreement No. 1910247. B.G., M.P., and P.O. acknowledge support from Grant No. PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, a way of making Europe and the Severo Ochoa program from Spanish MINECO (Grant No. CEX2021-001214-S). E.C. was supported by Grant No. PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through the Severo Ochoa MaTrans42 (Grant No. CEX2023-0001263-S) Excellence Centre distinction. B.G., M.P., P.O., and E.C. acknowledge support from Generalitat de Catalunya (CERCA program and Grant No. 2021SGR01519)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-0001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enantiomorphic single component conducting nickel(<sc>ii</sc>) and platinum(<sc>ii</sc>) bis(diethyl-dddt) crystalline complexes

  • Abhervé, Alexandre
  • Mroweh, Nabil
  • Cui, HengBo
  • Kato, Reizo
  • Vanthuyne, Nicolas
  • Alemany, Pere
  • Canadell, Enric
  • Avarvari, Narcis
Monoanionic and neutral nickel(II) and platinum(II) bis(dithiolene) complexes based on the 5,6-diethyl-5,6-dihydro-1,4-dithiin-2,3-dithiolate (de-dddt) chiral ligand have been prepared in racemic and enantiopure forms. Neutral closed-shell species have been generated from monoanionic precursors upon electrocrystallization. The racemic anionic (TBA)[Ni(S,S-de-dddt)(R,R-de-dddt)] complex crystallized in the centrosymmetric space group P21/c, while the neutral complexes crystallized in the enantiomorphic tetragonal space group P41212 or P43212. Very subtle conformational differences concerning the orientation of the ethyl substituents are observed between the racemic and the enantiopure compounds, thus impacting the intermolecular interactions at the nanoscale level. Indeed, in the former, the ethyl substituents are all-axial in both independent complexes, while in the latter, one of the independent complexes shows a mixed (eq, eq, ax, ax) conformation and the other independent complex of the asymmetric unit shows the all-axial conformation. Such a tenuous difference at the molecular/nanoscale level strongly impacts the conductivity of the materials. Temperature dependent high pressure single crystal conductivity measurements show activated conductivity for all the materials, with room temperature conductivity values of up to 1.3 × 10-3 S cm-1 for [Ni(S,S-de-dddt)2] at 12.3 GPa and 3.0 × 10-4 S cm-1 for [Pt(R,R-de-dddt)2] at 12.9 GPa. Nevertheless, the racemic compounds are more conductive, i.e. 3.8 × 10-2 S cm-1 for [Ni(rac-de-dddt)2] at 10.0 GPa and 1.5 × 10-3 S cm-1 for [Pt(rac-de-dddt)2] at 10.5 GPa, in agreement with the shorter and more numerous S⋯S intermolecular contacts observed in the crystal structures of the racemic complexes. Moreover, a detailed analysis of DFT calculations suggests that smaller band gaps and higher conductivities should occur for the racemic solids and for the Pt versus Ni complexes., This work was supported in France by the National Agency for Research (ANR, Project 15-CE29-0006-01 ChiraMolCo), the CNRS and the University of Angers. The work in Spain was supported by MCIN/AEI/10.13039/501100011033 and AEI through grants PID2022-139776NB-C61 and PID2021-128217NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Severo Ochoa FUNFUTURE MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction. P. A. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twisting between topological phases in 1D conjugated polymers via a multiradical transition state

  • Alcón, Isaac
  • Canonico, Luis M.
  • Papior, Nick
  • Garcia, Jose H.
  • Cummings, Aron W.
  • Tremblay, Jean Christophe
  • Pruneda, Miguel
  • Brandbyge, Mads
  • Paulus, Beate
  • Roche, Stephan
In recent years, it has become possible via on-surface bottom-up synthesis to engineer the topological character of carbon nanostructures. Graphene nanoribbons and 1D conjugated polymers (1DCPs) have thus tailored so as to host either topologically trivial or non-trivial phases. Molecular design is the primary means to set the topological class of these nanomaterials. However, external control over topology is also demonstrated via electric fields or top-down hydrogenation. Inspired by the connection between topology and π-conjugation, here it is demonstrated via first-principles calculations that aryl ring twist angles also serve as topological knobs. Focusing on rationally designed 1DCPs composed of triarylmethyl (TAM) units, it is shown that rotation of certain aryl rings enables a transition from the trivial to the topologically non-trivial phase. Accordingly, fixing a particular twist angle configuration (e.g., via chemical functionalization) is equivalent to robustly setting a targeted topological phase. It is also found that in considered 1DCPs, the quantum phase transition occurs without the electronic band gap closing, due to a multiradical antiferromagnetic phase emerging at the transition point. All in all, this study highlights the potential of aryl ring twisting for engineering topological properties in carbon nanomaterials and establishes TAM 1DCPs as exotic topological 1D systems., I.A. is grateful for a Juan de la Cierva postdoctoral grant (FJC2019-038971-I) from the Ministerio de Ciencia e Innovación (MCIN). L.M.C. also acknowledges a Juan de la Cierva postdoctoral grant (FJC2021-047300-I) from MCIN. M.P. acknowledges support from PID2022-139776NB-C61, funded by MCIN/AEI/10.13039/501100011033/FEDER, U. E. A. C. and S. R. acknowledge support from PID2019-106684GB-I00 also funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Computer facilities of the Freie Universität Berlin (ZEDAT) are acknowledged for computer time. ICN2 is funded by the CERCA Programme from Generalitat de Catalunya, has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706], and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rich structural, electronic, and bonding landscape of 1⁢𝑇-type TaTe2 single layers

  • Silva Guillén, José Ángel
  • Canadell, Enric
Charge density waves (CDW) in single-layer 1$T$-MTe$_2$ (M= Nb, Ta) recently raised large attention because of the contrasting structural and physical behavior with the sulfide and selenide analogues. A first-principles study of fourteen different 1$T$-type TaTe$_2$ single-layers is reported. The importance of Te to Ta electron transfer and multicenter metal-metal bonding in stabilizing different structural modulations is highlighted. Analysis of the electronic structure of the optimized structures provides a rationale for what distinguishes 1$T$-TaTe$_2$ from the related disulfide and diselenide, what are the more stable structural modulations for 1$T$-type TaTe$_2$ single-layers, the possible role of Fermi surface nesting on some of these CDW instabilities, how the CDW affects the metallic properties of the non-distorted lattice and the possibility that some of these CDW phases exhibit exotic properties. All CDW phases studied exhibit band structures typical of metallic systems although some exhibit both very flat and dispersive bands at the Fermi level so that Mott effects could develop; one of the (4$\times$4) phases studied exhibits a Dirac cone at the Fermi level., IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2020-001039-S/AEI/10.13039/501100011033). J.A.S.-G. acknowledges support from NOVMOMAT, Project No. PID2022-142162NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE and the “Ramón y Cajal” Fellowship Program, Grant No. RYC2023-044383-I financed by MICIU/AEI/10.13039/501100011033 and FSE+. E.C. was supported by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through Grant No. PID2022-139776NB-C61 and the Severo Ochoa FUNFUTURE MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction, as well as by Generalitat de Catalunya (Grant No. 2021 SGR 01519). We thankfully acknowledge RES resources provided by SCAYLE in Calendula to FI-2020-2-0040 and BSC in MareNostrum5 to FI-2024-2-0009., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold bis(dithiolene) radical with fused pyrazine and dithiine rings on dithiolene ligand turns metallic under pressure

  • Kharraz, Haia
  • Alemany, Pere
  • Canadell, Enric
  • Roisnel, Thierry
  • Cui, Hengbo
  • Kim, Kee Hoon
  • Fourmigué, Marc
  • Lorcy, Dominique
Conducting molecular materials built on dithiolene complexes, as mixed-valence salts or single component materials, are most often based on planar structures which efficiently stack on top of each other. Herein, we report an original dithiolene ligand, namely, [1,4]dithiino[2,3-b]pyrazine-2,3-bis(thiolate) (hereafter noted as pzdtdt), which combines an electron-withdrawing pyrazine ring and a folded (by 40-50°) dithiine ring. Until now, such strong distortions from planarity have been hindering the isolation of highly conducting materials from dithiine-containing dithiolene complexes. However, in this study, we showed that the gold complex radical [Au(pzdtdt)2]˙ obtained via electrocrystallization from the 1e- oxidation of [Ph4P][Au(pzdtdt)2] organized into regular, non-dimerized chains in the solid state. Interestingly, [Au(pzdtdt)2]˙ exhibited a semi-conducting behaviour at ambient pressure and turned metallic upon application of pressures above 4 GPa. The electronic structure of [Au(pzdtdt)2]˙ was investigated in terms of electron localization effects through spin-polarized band-structure calculations., Work in France was supported by ANR under contract no. ANR-23-CE07-0032-01 and by Rennes University through a PhD grant (to H. K.). The work at SNU was supported by the National Research Foundation (RS-2024-00338707) and by the Ministry of Education through the core center program (2021R1A6C101B418). Work in Spain was supported by MCIN/AEI/10.13039/501100011033 and AEI through Grants PID2022-139776NB-C61 and PID2021-128217NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Severo Ochoa FUNFUTURE MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction. P. A. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graph2Mat: universal graph to matrix conversion for electron density prediction

  • Febrer, Pol
  • Jørgensen, Peter Bjørn
  • Pruneda, Miguel
  • García Arribas, Alberto
  • Ordejón, Pablo
  • Bhowmik, Arghya
The electron density is a fundamental observable of an atomic system from which all ground-state properties can be computed. As a prediction target for machine learning (ML) models, electron density is often represented on a dense real space grid, which is data heavy, or through density fitting approximations. In this work, we show the power of targeting the density matrix (DM), a linear-scaling sparse SE(3) equivariant matrix that encodes the exact density. We introduce Graph2Mat, a universal function for converting molecular graphs into equivariant matrices. We demonstrate how a ML model that combines this Graph2Mat approach with state-of-the-art molecular graph representations can accurately predict the DM of molecular systems. The models achieve state-of-the-art performance on electron density prediction by matching the accuracy of grid-based methods, while using datasets that are at least one order of magnitude smaller. Accurately predicted electron densities can also accelerate density functional theory (DFT) calculations by reducing the number of self-consistent field (SCF) iterations needed to converge. In this work, we get an average 40% reduction on the number of SCF steps in DFT calculations of QM9 molecules with SIESTA. The novel prediction model also allows for two new and promising measures of uncertainty (total charge error and self-consistency error) that will facilitate its practical usage, e.g. within active learning workflows. These results open the door for many applications using hybrid ML-accelerated DFT methodologies, and uncertainty aware single iteration ab initio molecular dynamics., PF has received funding from the Project PID2022-139776NB-C62 funded by MCIN/AEI https://doi.org/10.13039/501100011033 ERDF, EU and the Grant PRE2019-089784 funded by MCIN/AEI https://doi.org/10.13039/501100011033 and by ESF Investing in your future. This work has been carried in the framework of the Materials Science PhD Program at Universitat Autònoma de Barcelona (UAB). AB was supported by Independent Research Fund Denmark with project DELIGHT (Grant No. 0217-00326B) TeraBatt project (Grant No. 2035-00232B) and ADANA project (Grant No. 3164-00297B). AG and MP were supported by Grant PID2022-139776NB-C61 of the Spanish MCIN/AEI https://doi.org/10.13039/501100011033, by the ERDF, A way of making Europe, and by Generalitat de Catalunya (Grant 2021SGR01519). AG acknowledges AEI through the Severo Ochoa MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction, and the European High Performance Computing Joint Undertaking under grant Agreement no. 101093374 (Materials design at the exascale), co-funded by AEI PCI2022-134978-2. This project has received funding from the European Union's project Battery Interface Genome—Materials Acceleration Platform: EU-H2020 Grant Agreement ID: 957189. PF, MP, AG and PO acknowledge support from EU MaX CoE (Grant 101093374) and Grants PCI2022-134972-2, PCI2022-134978-2, PID2022-139776NB-C61 and PID2022-139776NB-C62 funded by the Spanish MCIN/AEI https://doi.org/10.13039/501100011033 and by the ERDF, A way of making Europe, and Grant 2021SGR01519 from Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI https://doi.org/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge density wave instability below the semimetal to semiconductor transition in Mo8O23

  • Pouget, Jean-Paul
  • Guster, Bogdan
  • Canadell, Enric
The semimetallic to semiconductor transition of a complex oxide, Mo8⁢O23, remains a mysterious process among low-dimensional conductors. Although a general agreement was reached that the transition originates from a purely structural tilt instability related to the M3 instability of perovskites, recent scanning tunneling microscopy as well as Raman/IR reflectivity measurements have cast doubt about this scenario. We report an in-depth analysis of the density functional theory electron-hole response of this material, showing that a consistent scenario for the evolution of its structural and physical properties can not be put forward without taking into account an electron-hole instability at Γ of the perovskite fragment of the structure. We propose that the mechanism of the semimetallic to semiconductor transition involves several order parameters: (i) an octahedral tilt instability (𝜂tilt) driving the incommensurate and later commensurate modulations, and (ii) a Γ electron-hole instability coupled with the lattice via a low-frequency Raman mode. The latter induces the uniform deformation (i.e., tetramerization) of a group of four corner-sharing MoO6 octahedra (𝜂unif) repeating along one of the directions of the lattice. The two order parameters are of different symmetries and are independent in the semimetallic state but couple when the inversion symmetry is lost in the semiconducting state and the Raman mode becomes polar. The development of the uniform order of octahedral tetramers competes with the electronic and structural degrees of freedom of the high-temperature staggered tilt wave and induces a disorder of tetramer orientations stopping the growth of the charge density wave (CDW) coherence below 200 K. It is proposed that the generated polar orientation disorder can be explained by the formation of a series of solitons and antisolitons in the CDW, evidenced by a strong optical response., E.C. was supported by Grant No. PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through the Severo Ochoa MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction, as well as by Generalitat de Catalunya (Grant No. 2021 SGR 01519). B.G. acknowledges computational resources provided by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique (F.R.S.-FNRS) under Grant No. 2.5020.11 and the Tier-1 Lucia supercomputer of the Walloon Region, infrastructure funded by the Walloon Region under Grant Agreement No. 1910247., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral Metallic DM-EDT-TTF Radical Cation Salts: Anion Size-Dependent Structural and Electronic Transitions, Charge Ordering, and Chirality-Induced Spin Selectivity

  • Pop, Flavia
  • Mroweh, Nabil
  • Auban-Senzier, Pascale
  • Rikken, Geert L.J. A.
  • Hirobe, Daichi
  • Yamamoto, Hiroshi M.
  • Frąckowiak, Arkadiusz
  • Olejniczak, Iwona
  • Pillet, Sébastien
  • Bendeif, El-Eulmi
  • Alemany, Pere
  • Canadell, Enric
  • Avarvari, Narcis
Both enantiomers (S,S) and (R,R) of the chiral mixed-valence radical cation salts (DM-EDT-TTF)2XO4 (X = Cl or Re) have been prepared by electrocrystallization. Single-crystal high-quality synchrotron radiation data allowed for the very accurate determination of their 298 and 18 K structures. At room temperature, they crystallize in the enantiomorphic space groups P6222 and P6422 for the (S,S) and (R,R) enantiomers, respectively, while at 18 K, the structures have been solved in the P62 and P64 space groups, respectively. This symmetry reduction results in a quadrupled unit cell containing four independent donors disordered over two inequivalent positions. In the perrhenate salts, there is strong structural evidence of the occurrence of charge ordering at 18 K as suggested by the alternation of charge-rich and charge-poor donors within the stacks. The easier establishment of charge disproportionation is very likely related to the higher metal-to-insulator transition temperature for perrhenate compared to perchlorate, as observed in the electrical resistance measurements. Spin-polarized DFT band structure calculations support the magnetic ground state of the materials and the activated low-temperature conductivity as a consequence of gap opening. Single-crystal Raman spectroscopy measurements indicate a stronger charge ordering degree at 10 K for the perrhenate than for the perchlorate salts. For the first time in chiral TTF-based conductors, the chirality-induced spin selectivity (CISS) effect is demonstrated through magnetoresistance measurements at room temperature on thin crystals of (DM-EDT-TTF)2ClO4, with a value of up to 30% for CISS-induced magnetoresistance., This work was supported in France by the National Agency for Research (ANR) through the PRC 15-CE29-0006-01 (ChiraMolCo) and the PRC 20-CE06-0023-01 (SECRETS) projects. N.A., A.F., and I.O. thank the Narodowa Agencja Wymiany Akademickiej – NAWA (Poland, BPN/BFR/2021/1/00001/U/00001) and the French Ministry of Foreign Affairs and the French Ministry of Education and Research (France, PHC Project 48119PG) for financial support through the bilateral Polonium project. Work in Spain was supported by MICIN/AEI/10.13039/501100011033 (Grants PID2022-139776NB-C61 and PID2021-128217NB-I00) and Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E.C. acknowledges support from the Spanish MICIN/AEI/10.13039/501100011033 through the Severo Ochoa MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction and P.A. from the María de Maeztu Units of Excellence Program (CEX-2021-001202-M). D.H. acknowledges the Grant-in-Aid for Challenging Research (Exploratory) (20K20903), for Scientific Research (B) (23H01836), and for Transformative Research Areas (A) (24H02234) from JSPS KAKENHI, Japan, and PRESTO “Topological Materials Science for Creation of Innovative Functions” (JPMJPR20L9) from JST, Japan, as well as the Daiichi-Sankyo”Habataku” Support Program for the Next Generation of Researchers. This work was supported in Japan as well by the JSPS Core-to-Core Program (grant number: JPJSCCA20240001)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum transport in nitrogen-doped nanoporous graphenes

  • Calogero, Gaetano
  • Alcón, Isaac
  • Anaya Morales, Alan E.
  • Papior, Nick
  • Febrer, Pol
  • Cummings, Aron W.
  • Pruneda, Miguel
  • Roche, Stephan
  • Brandbyge, Mads
Bottom-up on-surface synthesized nanoporous graphenes (NPGs), realized as 2D arrays of laterally covalently bonded $π$-conjugated graphene nanoribbons (GNRs), are a family of carbon nanomaterials that are receiving increasing attention for nanoelectronics and biosensing. Recently, a so-called hybrid-NPG (hNPG) is synthesized, featuring an alternating sequence of doped and non-doped GNRs, resulting in a band staggering effect in its electronic structure. Such a feature is appealing for photo-catalysis, photovoltaics and even carbon nanocircuitry. However, to date, little is known about the transport properties of hNPG and its derivatives, which is key for most applications. Here, via Green's functions simulations, the quantum transport properties of hNPGs are studied. It is found that injected carriers in hNPG spread laterally through a number of GNRs, though such spreading may take place exclusively through GNRs of one type (doped or non-doped). A simple model is proposed to discern the key parameters determining the electronic propagation in hNPGs and explore alternative hNPG designs to control the spreading/confinement and anisotropy of charge transport in these systems. For one such design, it is found that it is possible to send directed electric signals with sub-nanometer precision for as long as one micrometer - a result first reported for any NPG., G.C. and I.A. contributed equally to this work. G.C. acknowledges the project SAMOTHRACE “Sicilian micro and nanotechnology research and innovation centre”, founded by PNRR-MUR (ECS_00000022, CUP B63C22000620005) for partial support. I.A. is grateful for a Juan de la Cierva postdoctoral grant (FJC2019-038971-I) from the Ministerio de Ciencia e Innovación. ICN2 is funded by the CERCA Programme from Generalitat de Catalunya, has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706], and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033. A.E.A.M. was funded by Independent Research Fund Denmark, Grant 0.46540/3103-00229B. M.P. acknowledges support from PID2022-139776NB-C61, funded by Spanish MCIN/AEI https://doi.org/10.13039/501100011033, by the ERDF, A way of making Europe, and by Generalitat de Catalunya (Grant 2021SGR01519). This work was also supported by MICIN with European funds (NextGenerationEU; PRTR-C17.I1) and by 2021 SGR 00997 funded by Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfacial electronic structure in hybrid HfO2-Graphene nanostructures

  • Akhtar, Arsalan
  • Rauwel, Protima
  • Rauwel, Erwan
  • Pruneda, Miguel
Data will be made available on request., We investigate the interaction between cubic phase HfO2 and graphene-based nanocomposites and examine the effects of carbon and oxygen vacancies on the properties of the nanomaterial. According to our ab initio calculations, the electronic structure of the nanocomposite is greatly influenced by the presence of oxygen vacancies in HfO2 that enhances charge transfer to the graphene layer. Our simulations also highlight the importance of defects on the carbon nanostructure that act as anchor sites for the cling of the oxide nanoparticle. These findings support experimental observations that suggest that the presence of defects on HfO2-graphenic nanocomposites is essential to explain their optoelectronic characteristics, and provides insights into optimization schemes for use in cutting-edge electronic and photonic devices., The authors acknowledge EU H2020 project NFFA (Grant No. 654360) under Transnational Access Activity ID-1029. M.P. acknowledges support from PID2022-139776NB-C61, funded by MCIN/AEI/10.13039/501100011033/FEDER. ICN2 is funded by the CERCA Programme from Generalitat de Catalunya, has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706], and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization effects in mixed-ligand gold bis(dithiolene) complexes as single-component conductors

  • Kharraz, Haia
  • Alemany, Pere
  • Canadell, Enric
  • Vacher, Antoine
  • Roisnel, Thierry
  • Cui, Hengbo
  • Kim, Kee Hoon
  • Fourmigue, Marc
  • Lorcy, Dominique
Mixed-ligand gold bis(dithiolene) complexes involving two non-innocent dithiolene ligands with different electronic characteristics have been developed, involving one TTF dithiolate (BMT-TTFS2 2 =40,50-bis(methylthio)tetrathiafuvalene-4,5-dithiolate) as a highly electron-rich ligand and either a benzene-1,2dithiolate (bdt) or a pyrazine-2,3-dithiolate (pzdt) as an electron-poor ligand. The monoanionic closedshell complexes are oxidized (by electrocrystallization) to neutral radical species, which behave as single-component conductors. The notably different electronic properties of the two dithiolene ligands lead to an exacerbated spin density localization on TTF dithiolate, with the resulting SOMO localized on the less electron-rich ligand. The dissymmetry imposed by the presence of two different ligands leads to a head-to-tail arrangement in the solid state and stack dimerization. The solid-state properties of the two radical complexes [Au(BMT-TTFS2)(bdt)] and [Au(BMT-TTFS2)(pzdt)] are deduced from transport measurements under pressure (up to 21 GPa) and spin-polarized band structure calculations. The 1D electronic structure with strongly dimerized chains and a direct, large band gap explains the observed semiconducting behavior. At variance with weakly dimerized systems adopting a Mott insulator behavior sensitive to pressure effects (toward a metallic state), [Au(BMT-TTFS2)(bdt)] and [Au(BMT-TTFS2)(pzdt)] show a robust gap under pressure, a direct consequence of the reinforced dimerization of BMT-TTFS2 moieties in the solid state., Work in France was supported by the ANR under contract no. ANR-23-CE07-0032-01 and by Rennes University through a PhD grant (to H. K.). Work in Spain was supported by MCIN/AEI/10.13039/501100011033 and AEI through Grants PID2022-139776NB-C61 and PID2021-128217NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Severo Ochoa FUNFUTURE MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction. P. A. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M). The work at SNU was supported by the National Research Foundation (RS-2024-00338707) and by the Ministry of Education through the core center program (2021R1A6C101B418)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable NIR absorption in gold complexes with mixed dithiolene/diselenolene ligands

  • Kharraz, Haia
  • Alemany, Pere
  • Canadell, Enric
  • Gal, Yann Le
  • Roisnel, Thierry
  • Fourmigué, Marc
  • Lorcy, Dominique
Based on a step-by-step procedure, an extensive series of monoanionic d8 gold complexes has been developed by replacing in mixed-ligand bis(dithiolene) complexes the coordinating sulfur atoms by selenium ones, either on one ligand or on both, leading to very original and stable mixed-ligand gold (dithiolene)(diselenolene) and bis(diselenolene) complexes. The neutral radical species obtained upon 1e– oxidation of bis(dithiolene) gold complexes are known to exhibit an NIR absorption band in the 1180−2070 nm range, of interest in telecommunications, biological imaging and solar cells. Here, spectroelectrochemical investigations demonstrate that the NIR signature of mixed-ligand bis(dithiolene), (dithiolene)(diselenolene) and bis(diselenolene) gold complexes associating two different dithiolene or diselenolene ligands is found at higher energy, out of the range of the homoleptic analogs. Moreover, introduction of Se atoms on the more electron-rich ligand modifies significantly the LUMO of the complex, leading to a further 200 nm bathochromic shift of this characteristic NIR absorption, thus offering an additional control of the NIR absorption of these neutral radical gold complexes., Work in France was supported by ANR under contract n° ANR-23-CE07-0032-01 as well as by Rennes University through a PhD grant (to H. K.). Work in Spain was supported by MCIN/AEI/10.13039/501100011033 and AEI through Grants PID2022-139776NB-C61 and PID2021-128217NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E. C. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Severo Ochoa FUNFUTURE MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction. P. A. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M). The authors acknowledge Dr. Antoine Vacher for the EPR study., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Software interoperability in electronic structure methods for atomistic materials simulations

  • Carrete, Jesús
  • García-Fernández, Pablo
  • Grüning, Myrta
  • He, Xu
  • Pionteck, Mike N.
  • Protik, Nakib H.
  • Todorović, Milica
  • Togo, Atsushi
  • Wang, Xing
  • Poloni, Roberta
  • Pruneda, Miguel
  • Cammarata, Antonio
Atomistic materials simulations increasingly rely on complex, multi-stage workflows that combine electronic structure first principles methods, effective models, machine-learning techniques, and high-performance computing, making software interoperability a central requirement rather than a technical convenience. This perspective highlights how modular, interoperable software ecosystems overcome the limitations of monolithic electronic structure codes, enabling automation, reproducibility, and scalability across diverse applications such as lattice dynamics, electronic, magnetic, optical, and transport properties, as well as data-driven materials optimization. We discuss how standardized workflows, robust data provenance, and interoperable infrastructures are essential for high-throughput studies, AI-ready databases, and the transition toward autonomous materials discovery. This is the result of the debates of the Symposium F “Advanced interoperability in atomistic simulations of materials”, which took place within the 2025 European Materials Research Society fall meeting., A.C. acknowledges support of the Czech Science Foundation (project No. 24-12643L), cofunding by the European Union under the project “Robotics and advanced industrial production” (reg. no. CZ.02.01.01/00/22_008/0004590), and the Ministry of Education, Youth and Sports of the Czech Republic through the e-INFRA CZ (ID:90254). M.P. acknowledges support from Grant PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, A way of making Europe, Grant 2021SGR01519 from Generalitat de Catalunya, and by EU MaX CoE (Grant 101093374). A.T. acknowledges support by JSPS KAKENHI Grant Numbers JP24K08021, JP24H00190, JP25H01246, and JP25H01252; some of the calculations in this study were performed on the Numerical Materials Simulator at NIMS. We gratefully thank Giovanni Pizzi for insightful discussions on workflow interoperability and provenance semantics. X.W. acknowledge financial support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). N.H.P. acknowledges funding from the “Deutsche Forschungsgemeinschaft” (DFG, German Research Foundation) for an “Emmy Noether” research grant (Grant No. 534386252). M.G. acknowledges funding from the UKRI Horizon Europe Guarantee funding scheme (EP/Y032659/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical generation of an open-shell gold(iii)–dithiolene porous coordination polymer

  • Cheret, Yohan
  • Novitchi, Ghenadie
  • Benjelloun, Kaoutar
  • Auban-Senzier, Pascale
  • Alemany, Pere
  • Canadell, Enric
  • Avarvari, Narcis
  • Zigon, Nicolas
Controlling the oxidation state of redox-active ligands during the assembly of Porous Coordination Polymers (PCPs) is a key challenge toward the design of electronically functional frameworks. Herein, we report a galvanostatic solvothermal strategy that enables the in situ electrochemical generation of an open-shell gold(iii) bis(dithiolene) ligand during the formation of the network. The anionic tetrabenzoate-functionalized precursor undergoes anodic oxidation under constant current conditions, allowing precise control of the ligand's electronic state during the assembly of the framework. Magnetic measurements reveal regular S = 1/2 antiferromagnetic chains arising from one unpaired electron per Au(iii)–dithiolene unit, while the room-temperature conductivity is comparable to that of closed-shell analogues, the charge transport proceeding through a Mott-insulating regime rather than a band-gap-activated mechanism, in agreement with band structure calculations and magnetic measurements. This electrochemical programming approach provides a general route to open-shell PCPs with electronically correlated ground states., This work was supported in France by the CNRS and the University of Angers. This work received financial support under the EUR LUMOMAT project and the Investments for the Future program ANR-18-EURE-0012 (support to Y. C. – MADCAP project). Work in Spain was supported by MCIN/AEI/10.13039/501100011033 and AEI through Grants PID2022-139776NB-C61 and PID2024-157317NB-I00 and by Generalitat de Catalunya (2021SGR01519 and 2021SGR00286). E.C. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Severo Ochoa MATRANS42 (CEX2023-0001263-S) Excellence Centre distinction. P. A. acknowledges MCIN/AEI/10.13039/501100011033 and AEI for support through the Maria de Maeztu Units of Excellence Program (CEX-2021-001202-M). A CC-BY public copyright license has been applied by the authors to the present document and will be applied to all subsequent versions up to the Author Accepted Manuscript arising from this submission, in accordance with the grant's open access conditions, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Engineered One-Dimensional van der Waals Heterostructures: BiTeI Confined in Carbon Nanotubes

  • Cuesta Troyano, Alejandro
  • Sandoval, Stefania
  • Rurali, Riccardo
  • Canadell, Enric
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
  • Cambré, Sofie
  • Bals, Sara
  • Tobias, Gerard
Controlling the nanostructure and electronic properties of polar semiconductors could enable new applications in nanoelectronics. Here, we report the synthesis of one-dimensional BiTeI nanowires confined within single- and multiwalled carbon nanotubes using a sublimation-driven transport reaction. Aberration-corrected scanning transmission electron microscopy reveals highly ordered BiTeI nanowires ranging from one to six atomic layers. Density gradient ultracentrifugation enables the separation of filled and empty nanotubes, while Raman spectroscopy evidences host–guest interactions. Furthermore, the encapsulation of BiTeI leads to an increase in the optical band gap and a stable enhancement in electrical conductivity in macroscopic films. First-principles calculations show that compressive strain significantly modifies the BiTeI electronic structure, including reduced Rashba splitting and strain-induced band reordering. Overall, nanoconfinement is shown to be a powerful route to probe and engineer strain-tunable electronic states in polar semiconductors at the one-dimensional scale., Financial support was provided by MCIN/AEI/10.13039/501-100011033/(PRE2021-099844, PID2023-146263NB-I00, PID2022-139776NB-C61, and PID2024-162811NB-I00), through the Severo Ochoa program (CEX2023-001263-S), and the consolidated research groups: “Solid State Chemistry Laboratory (ICMAB-CSIC)” and “Grup d’Estructura Electronica de Materials”, AGAUR (Generalitat of Catalonia, 2021SGR00439 and 2021SGR1519). S.S. acknowledges funding from the postdoctoral fellowship program Beatriu de Pinós, funded by the Department of Research and Universities, Government of Catalonia (grant number 2022-BP00157). S.C. acknowledges support from the University of Antwerp through the BOF - Research Centre of Excellence CASCH. The authors would like to thank Luis A. Perez for his technical assistance and expertise in the FTIR measurements and the assistance of the ICMAB-CSIC Scientific & Technical Services: electron microscopy service (Judith Oró-Solé). A.C.-T. carried out this work within the framework of the PhD program in Materials Science of the Autonomous University of Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Software interoperability in electronic structure methods for atomistic materials simulations

  • Carrete, Jesús
  • García-Fernández, Pablo
  • Grüning, Myrta
  • He, Xu
  • Pionteck, Mike N.
  • Protik, Nakib H.
  • Todorovic, Milica
  • Togo, Atsushi
  • Wang, Xing
  • Poloni, Roberta
  • Pruneda, Miguel
  • Cammarata, Antonio
Atomistic materials simulations increasingly rely on complex, multi-stage workflows that combine electronic structure first principles methods, effective models, machine-learning techniques, and high-performance computing, making software interoperability a central requirement rather than a technical convenience. This perspective highlights how modular, interoperable software ecosystems overcome the limitations of monolithic electronic structure codes, enabling automation, reproducibility, and scalability across diverse applications such as lattice dynamics, electronic, magnetic, optical, and transport properties, as well as data-driven materials optimization. We discuss how standardized workflows, robust data provenance, and interoperable infrastructures are essential for high-throughput studies, AI-ready databases, and the transition toward autonomous materials discovery. This is the result of the debates of the Symposium F “Advanced interoperability in atomistic simulations of materials”, which took place within the 2025 European Materials Research Society fall meeting.