Pasar al contenido principal

ECOSISTEMA SIESTA DE TECNICAS DE SIMULACION DE MATERIALES (SIESTA-ICN2)

PID2022-139776NB-C62

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4 W12 O44, γ - and η-Mo4 O11

  • Guster, Bogdan|||0000-0003-1305-1862
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Pouget, Jean-Paul|||0000-0002-6244-389X
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids γ-Mo4O11 and P4W12O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three t2g orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4W12O44 and four for γ-Mo4O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for γ-Mo4O11 and P4W12O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in η-Mo4O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inhibitory behaviour and adsorption stability of benzothiazole derivatives as corrosion inhibitors towards galvanised steel

  • Deng, Qiushi
  • Castillo-Robles, José María
  • Freitas Martins, Ernane de
  • Ordejón, Pablo
  • Gorges, Jan-Niclas
  • Eiden, Philipp
  • Chen, Xiao-Bo
  • Keil, Patrick
  • Cole, Ivan
An in-depth understanding of corrosion inhibitor behaviour(s) at the metal–solution interface governed by unique molecular features is the key premise to realising molecular tailoring for pronounced metal protection. This study investigated the distinct adsorption behaviours induced by merely replacing the chemical functionality upon benzothiazole, i.e., 2-mercaptobenzothiazole (2-MBT) and 2-aminobenzothiazole (2-ABT), towards electro-galvanised steel (ZE) corrosion using both experimental and theoretical approaches. Electrochemical results confirm that both inhibitor candidates act as corrosion inhibitors for ZE in NaCl solution. The underlying interactions of the inhibitor molecule with the targeting metal, dissolved metal ions and corrosion products were explored by means of X-ray photoelectron spectroscopy, focused ion beam scanning electron microscopy and Raman spectroscopy. It is suggested that 2-MBT facilitates the precipitation upon the ZE by complexing with the released Zn2+ in solution, while 2-ABT promotes preferentially thin inhibitor film formation initiated by chemisorption. Density functional theory (DFT) reveals that at high concentrations the molecules tend to adsorb vertically (slightly tilted) at the surface, where the presented heteroatoms enhance surface–molecule interaction. In addition, DFT suggests that the strong binding strength of 2-MBT could facilitate the formation of complexes with displaced Zn. Based on the proposed mechanisms, the adsorption stability upon polarised ZE surfaces was determined, which reveals that 2-MBT forms a thick inhibitor layer at a relatively high polarisation state, whereas 2-ABT dissociates from the surface with the increasing value of surface overpotential. The findings of this study provide structural understanding that underpins inhibitor tailoring and molecular design to achieve the desired inhibition properties., The authors gratefully acknowledge the financial support from BASF SE. The facilities and technical support of RMIT Microscopy & Microanalysis Facilities (RMMF) are also acknowledged. P. O. and E. F. M. acknowledge support by the EU project “MaX” (Grant No. 101093374), Grant PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, A way of making Europe, and Grant 2021SGR1519 from AGAUR. ICN2 was supported by the Generalitat de Catalunya (through the CERCA Program) and by the Severo Ochoa Centres of Excellence Program (Grant CEX2021-001214-S) funded by the Spanish MCIN/AEI/10.13039/501100011033. We acknowledge the computational resources at MareNostrum (BSC) provided by RES (Grants QHS-2022-2-0035, QHS-2022-3-0030, QHS-2023-1-0025 and QHS-2023-2-0022)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic understanding of the in-plane thermal transport properties of 2H transition metal dichalcogenides

  • Farris, Roberta
  • Hellman, Olle
  • Zanolli, Zeila
  • Saleta Reig, David
  • Varghese, Sebin
  • Ordejón, Pablo
  • Tielrooij, Klaas-Jan
  • Verstraete, Matthieu J.
Transition metal dichalcogenides (TMDs) are a class of layered materials that hold great promise for a wide range of applications. Their practical use can be limited by their thermal transport properties, which have proven challenging to determine accurately, both from a theoretical and experimental perspective. We have conducted a thorough theoretical investigation of the thermal conductivity of four common TMDs, MoSe2, WSe2, MoS2, and WS2, at room temperature, to determine the key factors that influence their thermal behavior. We analyze these materials using ab initio calculations performed with the siesta program, anharmonic lattice dynamics and the Boltzmann transport equation formalism, as implemented in the temperature-dependent effective potentials method. Within this framework, we analyze the microscopic parameters influencing the thermal conductivity, such as the phonon dispersion and the phonon lifetimes. The aim is to precisely identify the origin of differences in thermal conductivity among these canonical TMD materials. We compare their in-plane thermal properties in monolayer and bulk form, and we analyze how the thickness and the chemical composition affect the thermal transport behavior. We showcase how bonding and the crystal structure influence the thermal properties by comparing the TMDs with silicon, reporting the cases of bulk silicon and monolayer silicene. We find that the interlayer bond type (covalent vs. van der Waals) involved in the structure is crucial in the heat transport. In two-dimensional silicene, we observe a reduction by a factor ∼15 compared to the Si bulk thermal conductivity due to the smaller group velocities and shorter phonon lifetimes. In the TMDs, where the group velocities and the phonon bands do not vary significantly passing from the bulk to the monolayer limit, we do not see as strong a decrease in the thermal conductivity: only a factor 2–3. Moreover, our analysis reveals that differences in the thermal conductivity arise from variations in atomic species, bond strengths, and phonon lifetimes. These factors are closely interconnected and collectively impact the overall thermal conductivity. We inspect each of them separately and explain how they influence the heat transport. We also study artificial TMDs with modified masses, in order to assess how the chemistry of the compounds modifies the microscopic quantities and thus the thermal conductivity., R.F. and P.O. acknowledge support by the EU H2020-NMBP-TOIND-2018 project “INTERSECT” (Grant No. 814487) and Grant No. PID2022-139776NB-C62 funded by Spanish MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. R.F. and K.-J.T. acknowledge financial support by the Spanish State Research Agency under Contract No. PID2019-111673GB-I00/AEI/10.13039/501100011033 and the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 804349 (ERC StG CUHL). M.-J.V. acknowledges funding from ARC project DREAMS (G.A. 21/25-11) funding by the Federation Wallonie Bruxelles and ULiege, Belgium. Z.Z. acknowledges financial support by the Netherlands Sector Plan program 2019-2023 and the research program “Materials for the Quantum Age” (QuMat, registration number 024.005.006), part of the Gravitation program of the Dutch Ministry of Education, Culture and Science (OCW). We acknowledge a PRACE award granting access to MareNostrum4 at Barcelona Supercomputing Center (BSC), Spain and Discoverer in SofiaTech, Bulgaria (OptoSpin Project Id. 2020225411). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4⁢W12⁢O44, 𝛾- and 𝜂−Mo4⁢O11

  • Guster, Bogdan
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Canadell, Enric
  • Pouget, Jean-Paul
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three 𝑡2⁢𝑔 orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4⁢W12⁢O44 and four for 𝛾−Mo4⁢O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in 𝜂−Mo4⁢O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented., This paper owes much to numerous structural studies on 2D oxides and bronzes by P. Foury-Leylekian (Orsay) to whom we are very indebted. The authors also thank A. Minelli (Oak Ridge) for useful discussions concerning her IXS studies on the MPTB𝑝 and E. Duverger-Nédellec (Bordeaux) for sharing the results of her structural studies. B.G. acknowledges computational resources provided by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique (F.R.S.-FNRS) under Grant No. 2.5020.11 and the Tier-1 Lucia supercomputer of the Walloon Region, infrastructure funded by the Walloon Region under the Grant Agreement No. 1910247. B.G., M.P., and P.O. acknowledge support from Grant No. PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, a way of making Europe and the Severo Ochoa program from Spanish MINECO (Grant No. CEX2021-001214-S). E.C. was supported by Grant No. PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through the Severo Ochoa MaTrans42 (Grant No. CEX2023-0001263-S) Excellence Centre distinction. B.G., M.P., P.O., and E.C. acknowledge support from Generalitat de Catalunya (CERCA program and Grant No. 2021SGR01519)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge density waves and electron-hole instabilities of the hidden-nesting materials P4W12O44, γ- and η-Mo4O11

  • Guster, Bogdan
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Canadell, Enric
  • Pouget, Jean-Paul
The origin of the charge density wave (CDW) instabilities in the isostructural but not isoelectronic octahedral layers of the three-dimensional solids 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 is discussed on the basis of first-principles density functional theory calculations. These layers contain three different and superposed one-dimensional (1D) systems (two diagonal and one horizontal) associated with the three 𝑡2⁢𝑔 orbitals of the transition metal in octahedral coordination. Because of the special topology of the layers the three 1D systems are practically independent (hidden nesting) and the Lindhard function contains three different lines of intensity maxima associated with each of them. Clear cusps (six for P4⁢W12⁢O44 and four for 𝛾−Mo4⁢O11) occur at the intersections of these intensity lines. The wave vector of the structural modulations associated with some of these cusps from our calculations is in good agreement with the observed CDW wave vectors. The nature of the different modulations is analyzed on the basis of the calculated thermal dependence of intrachain and interchain coherence lengths of the diffuse lines associated with the diagonal and horizontal chains. Modulation in the diagonal chains is found to be more favorable than in the horizontal chain. The same type of wave vector is selected for 𝛾−Mo4⁢O11 and P4⁢W12⁢O44 despite having a different band filling. The coupling of the electronic instability to the phonon spectra and the relationship between the nature of the high-temperature modulation with the width of the octahedral layers is discussed. Among the two Magnéli phases the interlayer coupling is found to be somewhat stronger in 𝜂−Mo4⁢O11. The relationship with other hidden-nesting series of materials as the rare-earth tellurides is commented., B.G. acknowledges computational resources provided by the Consortium des Équipements de Calcul Intensif (CÉCI), funded by the Fonds de la Recherche Scientifique (F.R.S.-FNRS) under Grant No. 2.5020.11 and the Tier-1 Lucia supercomputer of the Walloon Region, infrastructure funded by the Walloon Region under the Grant Agreement No. 1910247. B.G., M.P., and P.O. acknowledge support from Grant No. PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, a way of making Europe and the Severo Ochoa program from Spanish MINECO (Grant No. CEX2021-001214-S). E.C. was supported by Grant No. PID2022-139776NB-C61 funded by the Spanish MCIN/AEI/10.13039/501100011033 and AEI through the Severo Ochoa MaTrans42 (Grant No. CEX2023-0001263-S) Excellence Centre distinction. B.G., M.P., P.O., and E.C. acknowledge support from Generalitat de Catalunya (CERCA program and Grant No. 2021SGR01519)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-0001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Density functional Bogoliubov-de Gennes theory for superconductors implemented in the SIESTA code

  • Reho, Riccardo
  • Wittemeier, Nils
  • Kole, Arnold H.
  • Ordejón, Pablo
  • Zanolli, Zeila
We present SIESTA-BdG, an implementation of the simultaneous solution of the Bogoliubov-de Gennes (BdG) and density functional theory (DFT) problem in SIESTA, a first-principles method and code for material simulations which uses pseudopotentials and a localized basis set. This unified approach describes both conventional and unconventional superconducting states, and enables a description of inhomogeneous superconductors and heterostructures. We demonstrate the validity, accuracy, and efficiency of SIESTA-BdG by computing physically relevant quantities (superconducting charge density, band structure, superconducting gap features, density of states) for conventional singlet (Nb, Pb) and unconventional (FeSe) superconductors. We find excellent agreement with experiments and results obtained within the KKR-BdG computational framework. SIESTA-BdG forms the basis for modeling quantum transport in superconducting devices and including—in an approximate fashion—the superconducting DFT potential of Oliveira, Gross, and Kohn., Z.Z. acknowledges the research program Materials for the Quantum Age (QuMat) for financial support. This program (Registration No 024.005.006) is part of the Gravitation program financed by the Dutch Ministry of Education, Culture and Science (OCW). R.R. and A.K. acknowledge financial support from Sector Plan Program 2019-2023. This work was sponsored by NWO-Domain Science for the use of supercomputer facilities. We also acknowledge that the results of this research have been achieved using the Tier-0 PRACE Research Infrastructure resource Discoverer based in Sofia, Bulgaria (OptoSpin project id. 2020225411). This project has received funding from the European Union's Horizon Europe research and innovation program under Grant Agreement No. 101130384 (QUONDENSATE). P.O. and N.W. acknowledge support from the EU MaX CoE (Grant No. 101093374) and Grants No. PCI2022-134972-2 and No. PID2022-139776NB-C62 funded by the Spanish MCIN/AEI/10.13039/501100011033 and by the ERDF, A way of making Europe. N.W. further acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 754558 (PREBIST - COFUND). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. CEX2021-001214-S) and by Generalitat de Catalunya (CERCA program and Grant No. 2021SGR01519)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular modeling applied to corrosion inhibition: a critical review

  • Castillo-Robles, José María
  • Freitas Martins, Ernane de
  • Ordejón, Pablo
  • Cole, Ivan
In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in materials. Nonetheless, the fundamental mechanisms determining their inhibition performance are still far from understood. Molecular modeling can provide important insights into those mechanisms, allowing for a detailed analysis of the corrosion inhibition (CI) process. However, CI modeling is frequently underexplored and commonly used in a standardized way following a pre-determined recipe to support experimental data. We highlight six fundamental aspects (A) that one should consider when modeling CI: (A1) the electronic properties of isolated inhibitors, (A2) the interaction of the inhibitor with the surface, (A3) the surface model, (A4) the effect of the anodic and cathodic zones on the surface, (A5) the solvent effects, and (A6) the electrodes’ potential effects. While A1-A3 are more frequently investigated, A4-A6 and some more complex surface models from A3 are usually not considered and represent gaps in the CI modeling literature. In this review, we discuss the main features of molecular modeling applied to CI, considering the aforementioned key aspects and focusing on the gaps that the emerging approaches aim to fill. Filling these gaps will allow performing more detailed simulations of the CI process, which, coupled with artificial intelligence (AI) methods and multiscale approaches, might construct the bridge between the nanoscale CI modeling and the continuum scale of the CI processes., P.O. and E.d.F.M. were funded by Grant PID2022-139776NB-C62 from Spanish MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, and Grant 2021SGR1519 from AGAUR. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya, and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graph2Mat: universal graph to matrix conversion for electron density prediction

  • Febrer, Pol
  • Jørgensen, Peter Bjørn
  • Pruneda, Miguel
  • García Arribas, Alberto
  • Ordejón, Pablo
  • Bhowmik, Arghya
The electron density is a fundamental observable of an atomic system from which all ground-state properties can be computed. As a prediction target for machine learning (ML) models, electron density is often represented on a dense real space grid, which is data heavy, or through density fitting approximations. In this work, we show the power of targeting the density matrix (DM), a linear-scaling sparse SE(3) equivariant matrix that encodes the exact density. We introduce Graph2Mat, a universal function for converting molecular graphs into equivariant matrices. We demonstrate how a ML model that combines this Graph2Mat approach with state-of-the-art molecular graph representations can accurately predict the DM of molecular systems. The models achieve state-of-the-art performance on electron density prediction by matching the accuracy of grid-based methods, while using datasets that are at least one order of magnitude smaller. Accurately predicted electron densities can also accelerate density functional theory (DFT) calculations by reducing the number of self-consistent field (SCF) iterations needed to converge. In this work, we get an average 40% reduction on the number of SCF steps in DFT calculations of QM9 molecules with SIESTA. The novel prediction model also allows for two new and promising measures of uncertainty (total charge error and self-consistency error) that will facilitate its practical usage, e.g. within active learning workflows. These results open the door for many applications using hybrid ML-accelerated DFT methodologies, and uncertainty aware single iteration ab initio molecular dynamics., PF has received funding from the Project PID2022-139776NB-C62 funded by MCIN/AEI https://doi.org/10.13039/501100011033 ERDF, EU and the Grant PRE2019-089784 funded by MCIN/AEI https://doi.org/10.13039/501100011033 and by ESF Investing in your future. This work has been carried in the framework of the Materials Science PhD Program at Universitat Autònoma de Barcelona (UAB). AB was supported by Independent Research Fund Denmark with project DELIGHT (Grant No. 0217-00326B) TeraBatt project (Grant No. 2035-00232B) and ADANA project (Grant No. 3164-00297B). AG and MP were supported by Grant PID2022-139776NB-C61 of the Spanish MCIN/AEI https://doi.org/10.13039/501100011033, by the ERDF, A way of making Europe, and by Generalitat de Catalunya (Grant 2021SGR01519). AG acknowledges AEI through the Severo Ochoa MaTrans42 (CEX2023-0001263-S) Excellence Centre distinction, and the European High Performance Computing Joint Undertaking under grant Agreement no. 101093374 (Materials design at the exascale), co-funded by AEI PCI2022-134978-2. This project has received funding from the European Union's project Battery Interface Genome—Materials Acceleration Platform: EU-H2020 Grant Agreement ID: 957189. PF, MP, AG and PO acknowledge support from EU MaX CoE (Grant 101093374) and Grants PCI2022-134972-2, PCI2022-134978-2, PID2022-139776NB-C61 and PID2022-139776NB-C62 funded by the Spanish MCIN/AEI https://doi.org/10.13039/501100011033 and by the ERDF, A way of making Europe, and Grant 2021SGR01519 from Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI https://doi.org/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

TDEP: Temperature Dependent Effective Potentials

  • Knoop, Florian
  • Shulumba, Nina
  • Castellano, Aloïs
  • Batista, José
  • Farris, Roberta
  • Verstraete, Matthieu J.
  • Heine, Matthew
  • Broido, David
  • Kim, Dennis
  • Klarbring, Johan
  • Abrikosov, Igor A.
  • Simak, Sergei I.
  • Hellman, Olle
The Temperature Dependent Effective Potential (TDEP) method is a versatile and efficient approach to include temperature in ab initio materials simulations based on phonon theory. TDEP can be used to describe thermodynamic properties in classical and quantum ensembles, and several response properties ranging from thermal transport to Neutron and Raman spectroscopy. A stable and fast reference implementation is given in the software package of the same name described here. The underlying theoretical framework and foundation is briefly sketched with an emphasis on discerning the conceptual difference between bare and effective phonon theory, in both self-consistent and non-self-consistent formulations. References to numerous applications and more in-depth discussions of the theory are given., F.K. and O.H. acknowledge support from the Swedish Research Council (VR) program 2020- 04630, and the Swedish e-Science Research Centre (SeRC). Work at Boston College was supported by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES) under Award #DE-SC0021071. M.J.V., A.C., and J.P.B. acknowledge funding by ARC project DREAMS (G.A. 21/25-11) funded by Federation Wallonie Bruxelles and ULiege, and by Excellence of Science project CONNECT number 40007563 funded by FWO and FNRS. R.F. acknowledges financial support by the Spanish State Research Agency under grant number PID2022-139776NB-C62 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. J. K. acknowledges support from the Swedish Research Council (VR) program 2021-00486. I.A.A. and S.I.S. acknowledge support by the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No. 2009 00971). I.A.A. is a Wallenberg Scholar (grant no. KAW-2018.0194). S.I.S. acknowledges the support from Swedish Research Council (VR) (Project No. 2023-05247) and the ERC (synergy grant FASTCORR project 854843). F.K. thanks Christian Carbogno for introducing him to Olle., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lennard–Jones Parameter Fitting for Gold/Water Interaction Based on Structural Analysis: A QM, MM, and QM/MM Study

  • Bancells i Blazquez, Pere
  • Pedron, Federico N.
  • Alcaraz Torres, Anthoni
  • Moraes, Elizane Efigenia de
  • Cole, Ivan
  • Freitas Martins, Ernane de
This article belongs to the Section Theory and Simulation of Nanostructures, The interaction between water and metallic interfaces is crucial in many fields, and accurate modeling requires good parametrizations using reference data. In classical molecular dynamics (MD), an important part of this interaction is described using the Lennard–Jones (LJ) potential. However, previously reported LJ parameters are not always optimal for capturing the metal/water interactions observed in ab initio descriptions such as density functional theory (DFT). Therefore, well-tailored LJ parameters are necessary to improve the description of water structuring metals in classical MD. The usual route for obtaining LJ parameters involves energetic analysis, where the energies of various structures are obtained via DFT calculations and then matched with the energies obtained using the LJ potentials by varying the sigma/epsilon parameters. Here, we show a different approach to fit LJ parameters for metal/water interactions, based on structural analysis. We report several classical MD simulations for gold/water, varying the sigma/epsilon parameters, comparing the resulting water structuring with that obtained using DFT. Additionally, we test these parameters in quantum mechanics/molecular mechanics (QM/MM) MD simulations, where electrostatic interactions are enabled. Our results demonstrate that the proposed approach can improve the LJ parameters reported in the literature and potentially develop parameters for more complex systems where the water structure above metallic surfaces plays a significant role. Finally, within this proposed approach, the water density profile obtained in hybrid QM/MM calculations, where water is treated as MM at a substantially reduced cost, closely matches the description it would have if treated as QM., Work supported by the Spanish MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe through Grant PID2022-139776NB-C62. This project has received funding from EuroHPC JU-EU under the “MAX” project (Grant No. 101093374), and from Grant PCI2022-134972-2 funded by the Spanish MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. In addition, this work was supported by the EU’s H2020 framework programme for research and innovation under grant agreements NFFA-Europe Pilot Transnational Access Facility (Grant No. 101007417), having benefited from the access provided by ICN2 in Barcelona within the framework of the NFFA proposals [ID801, ID548, and ID900]. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First-Principles Nanocapacitor Simulations of the Optical Dielectric Constant in Water Ice

  • Mannino, Anthony
  • Arvelos, Graciele M.
  • Kaushik, Kedarsh
  • Artacho, Emilio
  • Ordejón, Pablo
  • Rocha, Alexandre R.
  • Pedroza, Luana S.
  • Fernández Serra, Mariví
We introduce a combined density functional theory and nonequilibrium Green's function framework to compute the capacitance of nanocapacitors and directly extract the dielectric response of a subnanometer dielectric under bias. We identify that at the nanoscale conventional capacitance evaluations based on stored charge per unit voltage suffer from an ill-posed partitioning of electrode and dielectric charge. This partitioning directly impacts the geometric definition of capacitance through the capacitor width, which in turn makes the evaluation of dielectric response uncertain. This ambiguous separation further induces spurious interfacial polarizability when analyzed via maximally localized Wannier functions. Focusing on crystalline ice, we develop a robust charge-separation protocol that yields unique capacitance-derived polarizability and dielectric constants, unequivocally demonstrating that confinement alters neither ice's intrinsic electronic response nor its insensitivity to proton order. Our results lay the groundwork for rigorous interpretation of capacitor measurements in low-dimensional dielectric materials., M. F.-S. and A. M. were funded by the National Science Foundation Award No. DMR-2427902. A. M. thanks the Institute for Advanced Computational Science (IACS) at Stony Brook University (SBU) for support through a graduate fellowship. The authors would like to thank Stony Brook Research Computing and Cyberinfrastructure and IACS at SBU for access to the high-performance SeaWulf computing system, funded by the National Science Foundation (Awards No. 1531492 and No. 2215987) and matching funds from the Empire State Development’s Division of Science, Technology and Innovation (NYSTAR) program (Contract No. C210148). L. S. P., G. M. A., and A. R. R. would like to acknowledge financial support from Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP Grants No. 2017/10292-0, No. 2020/16593-4, and No. 2023/09820-2), Conselho Nacional de Pesquisa (CNPq), and CAPES. Some Calculations were carried out at CENAPAD-SP and at the Santos Dumont High performance facilities of Laboratorio Nacional de Computação Científica (LNCC), Brazil. E. A. was supported by the European Commission Horizon MSCA-SE Project MAMBA (Grant No. 101131245), the Spanish MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-139776NB-C65), a María de Maeztu award to Nanogune (Grant No. CEX2020-001038-M), the United Kingdom’s EPSRC (Grant No. EP/V062654/1), and the Basque Ikur HPC program, through a 2023 Cotutelage grant. P. O. was supported by the Spanish MCIN/AEI/10.13039/501100011033 (Grants No. PID2022-139776NB-C62 and No. PCI2022-134972-2) and by a Severo Ochoa award to ICN2 (Grant No. CEX2021-001214-S) and the EU-H2020 MaX “Materials Design at the Exascale” CoE (Grant No. 101093374)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2020-001038-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum transport with spin-orbit coupling: New developments in TranSIESTA

  • Wittemeier, Nils
  • Papior, Nick
  • Brandbyge, Mads
  • Zanolli, Zeila
  • Ordejón, Pablo
We present the implementation of spinor quantum transport within the non-equilibrium Green's function (NEGF) code TranSIESTA based on Density Functional Theory (DFT). First-principles methods play an essential role in molecular and material modelling, and the DFT+NEGF approach has become a widely-used tool for quantum transport simulation. Existing (open-source) DFT-based quantum transport codes either model non-equilibrium/finite-bias cases in an approximate way or rely on the collinear spin approximation. Our new implementation closes this gap and enables the TranSIESTA code to use full spinor-wave functions. Thereby it provides a method for transport simulation of topological materials and devices based on spin-orbit coupling (SOC) or non-collinear spins. These materials hold enormous potential for the development of ultra-low-energy electronics urgently needed for the design of sustainable technology. The new feature is tested on relevant systems determining magnetoresistance in iron nanostructures and transport properties of a lateral transition metal dichalcogenide heterojunction., Work supported by the EU-H2020 MaX “Materials Design at the Exascale” CoE (Grant No. 101093374), the Spanish MINECO, MICIU, AEI and EU FEDER (Grant No. PCI2022-134972-2 and PID2022-139776NB-C62). ICN2 is funded by the CERCA Program (Generalitat de Catalunya) and the Severo Ochoa Program from Spanish MINECO (Grant No. CEX2021-001214-S). NW has received funding from the EU-H2020 research and innovation programme under the Marie Sklodowska-Curie programme (Grant No. 754558). ZZ acknowledges financial support by the Ramón y Cajal programme, MINECO AEI and FSE-UE (RYC-2016-19344), the Netherlands Sector Plan program 2019–2023, the research program “Materials for the Quantum Age (QuMat)” financed by the Dutch Ministry of Education, Culture and Science (OCW) with registration nr. 024.005.006, and the European Union’s Horizon Europe research and innovation programme under grant agreement No 101130384(QUONDENSATE). We acknowledge computing resources on MareNostrum4 at Barcelona Supercomputing Center (BSC) and Discoverer in Sofia, Bulgaria, provided through the Tier-0 PRACE Research Infrastructure Project Access (OptoSpin project id. 2020225411). We also acknowledge computing time from RES (activity FI-2020-1-0014) and technical support provided by the Barcelona Supercomputing Center. This publication is part of the projects EINF-1858 and ”Quantum Materials by Design” with file number 2024.012 of the research programme Computing Time on National Computer Facilities which is (partly) financed by the Dutch Research Council (NWO) under the grant https://doi.org/10.61686/JUXDK41645., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomistic modeling of molecular interactions with copper oxides for corrosion inhibition

  • Iqbal, Mazhar
  • Martins, Ernane de Freitas
  • Todorova, Nevena
  • Fu, Zhongheng
  • Cole, Ivan
  • Ordejón, Pablo
A detailed understanding of the adsorption mechanism of organic corrosion inhibitors is essential, as these molecules must form film barriers on the metal surface to prevent corrosion-associated electrochemical reactions. In this regard, molecular modeling approaches can be valuable; however, the works reported in the literature to date use very simple models. This mini-review discusses the different kinds of copper surface models and theoretical methods used to simulate adsorbate-surface interactions. We focus on how authors have simulated an atmospheric corrosive medium − ambient containing moisture and pollutants, leading to a thin aqueous layer on the surface containing electrolyte ions such as chloride and others − to evaluate the realistic inhibitor’s adsorption mechanism. Finally, we discuss what kind of surface models and modeling approaches should be used to address two main aspects: a realistic description of adsorbate-surface interactions and the inhibitor’s adsorption mechanism under experimental corrosive conditions. (Figure presented.), M.I. is supported by the REDI Program of the RMIT, which has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101034328. The article reflects only the author's view. The European Union is not responsible for any use that may be made of the information it contains. The ICN2 is supported by the Grant «Excelencia Severo Ochoa» CEX2021-001214-S, funded by MICIU/AEI /10.13039/501100011033. M.I., E.F.M., and P.O. were supported by Grant PID2022-139776NB-C62 funded by MICIU/AEI /10.13039/501100011033 and by ERDF A way of making Europe., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microscopic understanding of the in-plane thermal transport properties of 2H transition metal dichalcogenides

  • Farris, Roberta|||0000-0001-6710-0100
  • Hellman, Olle|||0000-0002-3453-2975
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Saleta Reig, David|||0000-0003-3189-2331
  • Varghese, Sebin|||0000-0001-7204-7121
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
Transition metal dichalcogenides (TMDs) are a class of layered materials that hold great promise for a wide range of applications. Their practical use can be limited by their thermal transport properties, which have proven challenging to determine accurately, both from a theoretical and experimental perspective. We have conducted a thorough theoretical investigation of the thermal conductivity of four common TMDs, MoSe2, WSe2, MoS2, and WS2, at room temperature, to determine the key factors that influence their thermal behavior. We analyze these materials using ab initio calculations performed with the siesta program, anharmonic lattice dynamics and the Boltzmann transport equation formalism, as implemented in the temperature-dependent effective potentials method. Within this framework, we analyze the microscopic parameters influencing the thermal conductivity, such as the phonon dispersion and the phonon lifetimes. The aim is to precisely identify the origin of differences in thermal conductivity among these canonical TMD materials. We compare their in-plane thermal properties in monolayer and bulk form, and we analyze how the thickness and the chemical composition affect the thermal transport behavior. We showcase how bonding and the crystal structure influence the thermal properties by comparing the TMDs with silicon, reporting the cases of bulk silicon and monolayer silicene. We find that the interlayer bond type (covalent vs. van der Waals) involved in the structure is crucial in the heat transport. In two-dimensional silicene, we observe a reduction by a factor ∼15 compared to the Si bulk thermal conductivity due to the smaller group velocities and shorter phonon lifetimes. In the TMDs, where the group velocities and the phonon bands do not vary significantly passing from the bulk to the monolayer limit, we do not see as strong a decrease in the thermal conductivity: only a factor 2-3. Moreover, our analysis reveals that differences in the thermal conductivity arise from variations in atomic species, bond strengths, and phonon lifetimes. These factors are closely interconnected and collectively impact the overall thermal conductivity. We inspect each of them separately and explain how they influence the heat transport. We also study artificial TMDs with modified masses, in order to assess how the chemistry of the compounds modifies the microscopic quantities and thus the thermal conductivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Inhibitory behaviour and adsorption stability of benzothiazole derivatives as corrosion inhibitors towards galvanised steel

  • Deng, Qiushi|||0000-0001-8118-1998
  • Gorges, Jan-Niclas
  • Eiden, Philipp
  • Chen, Xiao-Bo|||0000-0002-4508-5971
  • Keil, Patrick|||0000-0001-7899-0882
  • Cole, Ivan|||0000-0001-6582-1457
  • Castillo-Robles, Jose Maria|||0000-0001-6583-862X
  • Martins, Ernane|||0000-0002-3892-4693
  • Ordejon, Pablo|||0000-0002-2353-2793
An in-depth understanding of corrosion inhibitor behaviour(s) at the metal-solution interface governed by unique molecular features is the key premise to realising molecular tailoring for pronounced metal protection. This study investigated the distinct adsorption behaviours induced by merely replacing the chemical functionality upon benzothiazole, i.e., 2-mercaptobenzothiazole (2-MBT) and 2-aminobenzothiazole (2-ABT), towards electro-galvanised steel (ZE) corrosion using both experimental and theoretical approaches. Electrochemical results confirm that both inhibitor candidates act as corrosion inhibitors for ZE in NaCl solution. The underlying interactions of the inhibitor molecule with the targeting metal, dissolved metal ions and corrosion products were explored by means of X-ray photoelectron spectroscopy, focused ion beam scanning electron microscopy and Raman spectroscopy. It is suggested that 2-MBT facilitates the precipitation upon the ZE by complexing with the released Zn in solution, while 2-ABT promotes preferentially thin inhibitor film formation initiated by chemisorption. Density functional theory (DFT) reveals that at high concentrations the molecules tend to adsorb vertically (slightly tilted) at the surface, where the presented heteroatoms enhance surface-molecule interaction. In addition, DFT suggests that the strong binding strength of 2-MBT could facilitate the formation of complexes with displaced Zn. Based on the proposed mechanisms, the adsorption stability upon polarised ZE surfaces was determined, which reveals that 2-MBT forms a thick inhibitor layer at a relatively high polarisation state, whereas 2-ABT dissociates from the surface with the increasing value of surface overpotential. The findings of this study provide structural understanding that underpins inhibitor tailoring and molecular design to achieve the desired inhibition properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

TDEP, Temperature Dependent Effective Potentials

  • Knoop, Florian|||0000-0002-7132-039X
  • Shulumba, Nina|||0000-0002-2374-7487
  • Castellano, Aloïs|||0000-0002-8783-490X
  • Alvarinhas Batista, J.P.|||0000-0002-3314-249X
  • Farris, Roberta|||0000-0001-6710-0100
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Heine, Matthew|||0000-0002-4882-6712
  • Broido, David|||0000-0003-0182-4450
  • Kim, Dennis S.|||0000-0002-5707-2609
  • Klarbring, Johan|||0000-0002-6223-5812
  • Abrikosov, Igor A.|||0000-0001-7551-4717
  • Simak, Sergei I.|||0000-0002-1320-389X
  • Hellman, Olle|||0000-0002-3453-2975
The Temperature Dependent Effective Potential (TDEP) method is a versatile and efficient approach to include temperature in ab initio materials simulations based on phonon theory. TDEP can be used to describe thermodynamic properties in classical and quantum ensembles, and several response properties ranging from thermal transport to Neutron and Raman spectroscopy. A stable and fast reference implementation is given in the software package of the same name described here. The underlying theoretical framework and foundation is briefly sketched with an emphasis on discerning the conceptual difference between bare and effective phonon theory, in both self-consistent and non-self-consistent formulations. References to numerous applications and more in-depth discussions of the theory are given.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Molecular modeling applied to corrosion inhibition, a critical review

  • Castillo-Robles, Jose Maria|||0000-0001-6583-862X
  • Martins, Ernane|||0000-0002-3892-4693
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Cole, Ivan|||0000-0001-6582-1457
In the last few years, organic corrosion inhibitors have been used as a green alternative to toxic inorganic compounds to prevent corrosion in materials. Nonetheless, the fundamental mechanisms determining their inhibition performance are still far from understood. Molecular modeling can provide important insights into those mechanisms, allowing for a detailed analysis of the corrosion inhibition (CI) process. However, CI modeling is frequently underexplored and commonly used in a standardized way following a pre-determined recipe to support experimental data. We highlight six fundamental aspects (A) that one should consider when modeling CI: (A1) the electronic properties of isolated inhibitors, (A2) the interaction of the inhibitor with the surface, (A3) the surface model, (A4) the effect of the anodic and cathodic zones on the surface, (A5) the solvent effects, and (A6) the electrodes' potential effects. While A1-A3 are more frequently investigated, A4-A6 and some more complex surface models from A3 are usually not considered and represent gaps in the CI modeling literature. In this review, we discuss the main features of molecular modeling applied to CI, considering the aforementioned key aspects and focusing on the gaps that the emerging approaches aim to fill. Filling these gaps will allow performing more detailed simulations of the CI process, which, coupled with artificial intelligence (AI) methods and multiscale approaches, might construct the bridge between the nanoscale CI modeling and the continuum scale of the CI processes.