Pasar al contenido principal

DIRIGIENDO EL FLUJO DE CALOR EN MATERIALES EN CAPAS

PID2019-111673GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Thermal Conductivity of Free-Standing Double-Walled Carbon Nanotube Networks

  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Timmermans, Marina Y.
  • Saleta Reig, David|||0000-0003-3189-2331
  • Sergeant, Stefanie|||0000-0001-9923-0903
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Gallagher, Emily
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Huyghebaert, Cedric
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Nanomaterials are driving advances in technology due to their oftentimes superior properties over bulk materials. In particular, their thermal properties become increasingly important as efficient heat dissipation is required to realize high-performance electronic devices, reduce energy consumption, and prevent thermal damage. One application where nanomaterials can play a crucial role is extreme ultraviolet (EUV) lithography, where pellicles that protect the photomask from particle contamination have to be transparent to EUV light, mechanically strong, and thermally conductive in order to withstand the heat associated with high-power EUV radiation. Free-standing carbon nanotube (CNT) films have emerged as candidates due to their high EUV transparency and ability to withstand heat. However, the thermal transport properties of these films are not well understood beyond bulk emissivity measurements. Here, we measure the thermal conductivity of free-standing CNT films using all-optical Raman thermometry at temperatures between 300 and 700 K. We find thermal conductivities up to 50 W m -1 K -1 for films composed of double-walled CNTs, which rises to 257 W m -1 K -1 when considering the CNT network alone. These values are remarkably high for randomly oriented CNT networks, roughly seven times that of single-walled CNT films. The enhanced thermal conduction is due to the additional wall, which likely gives rise to additional heat-carrying phonon modes and provides a certain resilience to defects. Our results demonstrate that free-standing double-walled CNT films efficiently dissipate heat, enhancing our understanding of these promising films and how they are suited to applications in EUV lithography.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication and characterization of large-area suspended MoSe2 crystals down to the monolayer

  • Varghese, Sebin
  • Saleta Reig, David
  • Mehew, Jake D.
  • Block, Alexander
  • Sachat, Alexandros el
  • Chávez-Angel, Emigdio
  • Sledzinska, Marianna
  • Ballesteros, Belén
  • Sotomayor Torres, C. M.
  • Tielrooij, Klaas-Jan
Many layered materials, such as graphene and transition metal dichalcogenides, can be exfoliated down to atomic or molecular monolayers. These materials exhibit exciting material properties that can be exploited for several promising device concepts. Thinner materials lead to an increased surface-to-volume ratio, with mono- and bi-layers being basically pure surfaces. Thin crystals containing more than two layers also often behave as an all-surface material, depending on the physical property of interest. As a result, flakes of layered materials are typically highly sensitive to their environment, which is undesirable for a broad range of studies and potential devices. Material systems based on suspended flakes overcome this issue, yet often require complex fabrication procedures. Here, we demonstrate the relatively straightforward fabrication of exfoliated MoSe flakes down to the monolayer, suspended over unprecedentedly large holes with a diameter of 15 µm. We describe our fabrication methods in detail, present characterization measurements of the fabricated structures, and, finally, exploit these suspended flakes for accurate optical absorption measurements., The authors would like to thank Emerson Coy (CNBM-AMU) for sharing the HR-TEM images. S V and D S R acknowledge the support of the Spanish Ministry of Economy through FPI-SO 2018 and FPI-SO 2019, respectively. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). K J T acknowledges funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RyC Fellowship No. RYC-2017-22330, and IAE Project PID2019-111673GB-I00. A E S, E C A, M S and C M S T acknowledge support of the Spanish MICINN Project SIP (PGC2018-101743-B-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hot-Carrier Cooling in High-Quality Graphene Is Intrinsically Limited by Optical Phonons

  • Pogna, Eva A. A.
  • Jia, Xiaoyu
  • Principi, Alessandro
  • Block, Alexander
  • Banszerus, Luca
  • Zhang, Jincan
  • Liu, Xiaoting
  • Sohier, Thibault J. M.
  • Forti, Stiven
  • Soundarapandian, Karuppasamy
  • Terrés, Bernat
  • Mehew, Jake D.
  • Trovatello, Chiara
  • Coletti, Camilla
  • Koppens, Frank H. L.
  • Bonn, Mischa
  • Wang, Hai I.
  • Hulst, Niek F. van
  • Verstraete, Matthieu J.
  • Peng, Hailin
  • Liu, Zhongfan
  • Stampfer, Christoph
  • Cerullo, Giulio
  • Tielrooij, Klaas-Jan
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand the relaxation dynamics after photoexcitation. These dynamics contain a sub-100 fs thermalization phase, which occurs through carrier-carrier scattering and leads to a carrier distribution with an elevated temperature. This is followed by a picosecond cooling phase, where different phonon systems play a role: graphene acoustic and optical phonons, and substrate phonons. Here, we address the cooling pathway of two technologically relevant systems, both consisting of high-quality graphene with a mobility >10000 cm2 V-1 s-1 and environments that do not efficiently take up electronic heat from graphene: WSe2-encapsulated graphene and suspended graphene. We study the cooling dynamics using ultrafast pump-probe spectroscopy at room temperature. Cooling via disorder-assisted acoustic phonon scattering and out-of-plane heat transfer to substrate phonons is relatively inefficient in these systems, suggesting a cooling time of tens of picoseconds. However, we observe much faster cooling, on a time scale of a few picoseconds. We attribute this to an intrinsic cooling mechanism, where carriers in the high-energy tail of the hot-carrier distribution emit optical phonons. This creates a permanent heat sink, as carriers efficiently rethermalize. We develop a macroscopic model that explains the observed dynamics, where cooling is eventually limited by optical-to-acoustic phonon coupling. These fundamental insights will guide the development of graphene-based optoelectronic devices., We would like to thank Andrea Tomadin for discussions. The authors acknowledge funding from the European Union Horizon 2020 Programme under Grant Agreement No. 881603 Graphene Core 3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). A.P. acknowledges support from the European Commission under the EU Horizon 2020 MSCA-RISE-2019 programme (project 873028 HYDROTRONICS) and from the Leverhulme Trust under grant RPG-2019-363. K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RyC fellowship No. RYC-2017-22330, and IAE project PID2019-111673GB-I00 and financial support through the MAINZ Visiting Professorship. X.J. acknowledges the support from the Max Planck Graduate Center with the Johannes Gutenberg-Universität Mainz (MPGC). J.Z. acknowledges the support from National Natural Science Foundation of China (No. 52072042). Z.L. acknowledges the support from National Natural Science Foundation of China (No. 51520105003). T.S. acknowledges support from the University of Liege under Special Funds for Research, IPD-STEMA Programme. M.J.V. gratefully acknowledges funding from the Belgian Fonds National de la Recherche Scientifique (FNRS) under PDR grant T.0103.19-ALPS. Computational resources were provided by CECI (FRS-FNRS G.A. 2.5020.11) and the Zenobe Tier-1 supercomputer (Gouvernement Wallon G.A. 1117545) and by a PRACE-3IP DECI grant 2DSpin and Pylight on Beskow (G.A. 653838 of H2020). ICFO was supported by the Severo Ochoa program for Centers of Excellence in R&D (CEX2019-000910-S), Fundació Privada Cellex, Fundació Privada Mir-Puig, and the Generalitat de Catalunya through the CERCA program. N.v.H. acknowledges funding by the European Commission (ERC AdG 670949-LightNet), the Spanish Plan Nacional (PGC2018-096875-BI00), and the Catalan AGAUR (2017SGR1369).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hot carriers in graphene-fundamentals and applications

  • Massicotte, Mathieu
  • Soavi, Giancarlo
  • Principi, Alessandro
  • Tielrooij, Klaas-Jan
Hot charge carriers in graphene exhibit fascinating physical phenomena, whose understanding has improved greatly over the past decade. They have distinctly different physical properties compared to, for example, hot carriers in conventional metals. This is predominantly the result of graphene's linear energy-momentum dispersion, its phonon properties, its all-interface character, and the tunability of its carrier density down to very small values, and from electron- to hole-doping. Since a few years, we have witnessed an increasing interest in technological applications enabled by hot carriers in graphene. Of particular interest are optical and optoelectronic applications, where hot carriers are used to detect (photodetection), convert (nonlinear photonics), or emit (luminescence) light. Graphene-enabled systems in these application areas could find widespread use and have a disruptive impact, for example in the field of data communication, high-frequency electronics, and industrial quality control. The aim of this review is to provide an overview of the most relevant physics and working principles that are relevant for applications exploiting hot carriers in graphene., ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). K. J. T. acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 804349 (ERC StG CUHL), RyC fellowship no. RYC-2017-22330, IAE project PID2019-111673GB-I00, and financial support through the MAINZ Visiting Professorship. G. S. acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement GrapheneCore3 881603, the German Research Foundation DFG (CRC 1375 NOA, project B5) and the Daimler und Benz foundation. M. M. acknowledges support from the Natural Sciences and Engineering Research Council of Canada (PDF-516936-2018) and from the Canada First Research Excellence Fund. A. P. is supported by the European Commission under the EU Horizon 2020 MSCA-RISE-2019 programme (project 873028 HYDROTRONICS). A. P. also acknowledges support of the Leverhulme Trust under the grant RPG-2019-363.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of giant and tunable thermal diffusivity of a Dirac fluid at room temperature

  • Block, Alexander
  • Principi, Alessandro
  • Hesp, Niels C. H.
  • Cummings, Aron W.
  • Liebel, Matz
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Roche, Stephan
  • Koppens, Frank H. L.
  • Hulst, Niek F. van
  • Tielrooij, Klaas-Jan
Conducting materials typically exhibit either diffusive or ballistic charge transport. When electron–electron interactions dominate, a hydrodynamic regime with viscous charge flow emerges. More stringent conditions eventually yield a quantum-critical Dirac-fluid regime, where electronic heat can flow more efficiently than charge. However, observing and controlling the flow of electronic heat in the hydrodynamic regime at room temperature has so far remained elusive. Here we observe heat transport in graphene in the diffusive and hydrodynamic regimes, and report a controllable transition to the Dirac-fluid regime at room temperature, using carrier temperature and carrier density as control knobs. We introduce the technique of spatiotemporal thermoelectric microscopy with femtosecond temporal and nanometre spatial resolution, which allows for tracking electronic heat spreading. In the diffusive regime, we find a thermal diffusivity of roughly 2,000 cm s, consistent with charge transport. Moreover, within the hydrodynamic time window before momentum relaxation, we observe heat spreading corresponding to a giant diffusivity up to 70,000 cm s, indicative of a Dirac fluid. Our results offer the possibility of further exploration of these interesting physical phenomena and their potential applications in nanoscale thermal management., We thank M. Polini and P. Piskunow for fruitful discussions, and H. Agarwal and K. Soundarapandian for help with sample fabrication. We acknowledge the following funding sources: European Union’s Horizon 2020 research and innovation programme under grant nos. 804349 (K.-J.T.), 873028 (A.P.), 785219 (F.H.L.K. and S.R.), 881603 (F.H.L.K. and S.R.) and 670949 (N.F.v.H.); Spanish MCIU/AEI under grant nos. RYC-2017-22330 (K.-J.T.), PID2019-111673GB-I00 (K.-J.T.), BES-2016-078727 (M.L.), RTI2018-099957-J-I00 (M.L.) and PGC2018-096875-B-I00 (M.L. and N.F.v.H.); the Government of Catalonia under grant nos. SGR1656 (F.H.L.K.) and 2017SGR1369 (N.F.v.H.) and the CERCA program (ICN2 and ICFO); Spanish MINECO under grant nos. SEV-2017-0706 (ICN2) and CEX-2019-000910-S (ICFO); the International PhD fellowship program ‘la Caixa’ (A.B.); Leverhulme Trust grant no. RPG-2019-363 (A.P.); the Elemental Strategy Initiative conducted by the MEXT, Japan, grant no. JPMXP0112101001 (K.W. and T.T.), JSPS KAKENHI grant no. JP20H00354 (K.W. and T.T.) and the CREST (grant no. JPMJCR15F3) and JST (K.W. and T.T.); Fundació Privada Cellex (ICFO) and Fundació Mir-Puig (ICFO).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrically Tunable Nonequilibrium Optical Response of Graphene

  • Pogna, Eva A. A.
  • Tomadin, Andrea
  • Balci, Osman
  • Soavi, Giancarlo
  • Paradisanos, Ioannis
  • Guizzardi, Michele
  • Pedrinazzi, Paolo
  • Mignuzzi, Sandro
  • Tielrooij, Klaas-Jan
  • Polini, Marco
  • Ferrari, Andrea C.
  • Cerullo, Giulio
The ability to tune the optical response of a material via electrostatic gating is crucial for optoelectronic applications, such as electro-optic modulators, saturable absorbers, optical limiters, photodetectors, and transparent electrodes. The band structure of single layer graphene (SLG), with zero-gap, linearly dispersive conduction and valence bands, enables an easy control of the Fermi energy, E, and of the threshold for interband optical absorption. Here, we report the tunability of the SLG nonequilibrium optical response in the near-infrared (1000-1700 nm/0.729-1.240 eV), exploring a range of Efrom -650 to 250 meV by ionic liquid gating. As Eincreases from the Dirac point to the threshold for Pauli blocking of interband absorption, we observe a slow-down of the photobleaching relaxation dynamics, which we attribute to the quenching of optical phonon emission from photoexcited charge carriers. For Eexceeding the Pauli blocking threshold, photobleaching eventually turns into photoinduced absorption, because the hot electrons' excitation increases the SLG absorption. The ability to control both recovery time and sign of the nonequilibrium optical response by electrostatic gating makes SLG ideal for tunable saturable absorbers with controlled dynamics., We thank A. Principi for useful discussions. We acknowledge funding from the European Union Graphene Flagship, ERC Grants Hetero2D, GSYNCOR, and CUHL, EPSRC Grants EP/K01711X/1, EP/K017144/1, EP/N010345/1, EP/L016087/1, EP/V000055/1, the German Research Foundation DFG (CRC 1375 NOA), the Daimler und Benz foundation, RYC fellowship No. RYC-2017-22330, IAE project PID2019-111673GB-I00, and the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Milliwatt terahertz harmonic generation from topological insulator metamaterials

  • Tielrooij, Klaas-Jan
  • Principi, Alessandro
  • Saleta Reig, David
  • Block, Alexander
  • Varghese, Sebin
  • Schreyeck, Steffen
  • Brunner, Karl
  • Karczewski, Grzegorz
  • Ilyakov, Igor
  • Ponomaryov, Alexey N.
  • Oliveira, Thales V. A. G. de
  • Chen, Min
  • Deinert, Jan-Christoph
  • Gomez-Carbonell, Carmen
  • Valenzuela, Sergio O.
  • Molenkamp, Laurens W.
  • Kiessling, Tobias
  • Astakhov, Georgy V.
  • Kovalev, Sergey
Achieving efficient, high-power harmonic generation in the terahertz spectral domain has technological applications, for example, in sixth generation (6G) communication networks. Massless Dirac fermions possess extremely large terahertz nonlinear susceptibilities and harmonic conversion efficiencies. However, the observed maximum generated harmonic power is limited, because of saturation effects at increasing incident powers, as shown recently for graphene. Here, we demonstrate room-temperature terahertz harmonic generation in a BiSe topological insulator and topological-insulator-grating metamaterial structures with surface-selective terahertz field enhancement. We obtain a third-harmonic power approaching the milliwatt range for an incident power of 75 mW—an improvement by two orders of magnitude compared to a benchmarked graphene sample. We establish a framework in which this exceptional performance is the result of thermodynamic harmonic generation by the massless topological surface states, benefiting from ultrafast dissipation of electronic heat via surface-bulk Coulomb interactions. These results are an important step towards on-chip terahertz (opto)electronic applications., K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RYC fellowship No. RYC-2017-22330, and IAE project PID2019-111673GB-I00. ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706. A.P. acknowledges support from the European Commission under the EU Horizon 2020 MSCA-RISE-2019 programme (project 873028 HYDROTRONICS) and from the Leverhulme Trust under the grant RPG-2019-363. S.S., K.B., T.K., and L.W.M. acknowledge support by the SFB1170 (DFG project ID 258499086). C.G. and S.O.V. acknowledge support from the European Union’s Horizon 2020 FET-PROACTIVE project TOCHA under grant agreement 824140. T.K., L.W.M., and G.V.A. acknowledge the financial support from the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter (EXC 2147, 390858490).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films

  • Varghese, Sebin
  • Mehew, Jake D.
  • Block, Alexander
  • Saleta Reig, David
  • Woźniak, Pawel
  • Farris, Roberta
  • Zanolli, Zeila
  • Ordejón, Pablo
  • Verstraete, Matthieu J.
  • Hulst, Niek F. van
  • Tielrooij, Klaas-Jan
Diffusion is one of the most ubiquitous transport phenomena in nature. Experimentally, it can be tracked by following point spreading in space and time. Here, we introduce a spatiotemporal pump-probe microscopy technique that exploits the residual spatial temperature profile obtained through the transient reflectivity when probe pulses arrive before pump pulses. This corresponds to an effective pump-probe time delay of 13 ns, determined by the repetition rate of our laser system (76 MHz). This pre-time-zero technique enables probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy and is particularly powerful for following in-plane heat diffusion in thin films. The particular advantage of this technique is that it enables quantifying thermal transport without requiring any material input parameters or strong heating. We demonstrate the direct determination of the thermal diffusivities of films with a thickness of around 15 nm, consisting of the layered materials MoSe2 (0.18 cm2/s), WSe2 (0.20 cm2/s), MoS2 (0.35 cm2/s), and WS2 (0.59 cm2/s). This technique paves the way for observing nanoscale thermal transport phenomena and tracking diffusion of a broad range of species., ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706. S.V. and D.S.R. acknowledge the support of the Spanish Ministry of Economy through FPI-SO2018 and FPI-SO2019, respectively. K.-J.T. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RYC fellowship No. RYC-2017-22330 and IAE Project No. PID2019-111673GB-I00. ICFO was supported by the Severo Ochoa program for Centers of Excellence in R&D (CEX2019-000910-S), Fundació Privada Cellex, Fundació Privada Mir-Puig, and the Generalitat de Catalunya through the CERCA program. P.W. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation program under the Marie Skłodowska-Curie Grant Agreement No. 754510 (PROBIST). N.F.v.H. acknowledges funding by the European Commission (ERC AdG 670949-LightNet), the Spanish Plan Nacional (PGC2018-096875-BI00), and the Catalan AGAUR (2017SGR1369). M.J.V. acknowledges support from Fédération Wallonie Bruxelles and ULiège (ARC project DREAMS G.A. 21/25-11). Z.Z. acknowledges the research program “Materials for the Quantum Age” (QuMAt) for financial support. This program (Registration No. 024.005.006) is part of the Gravitation program financed by the Dutch Ministry of Education, Culture and Science (OCW)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000910-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron cooling in graphene enhanced by plasmon-hydron resonance

  • Yu, Xiaoqing
  • Principi, Alessandro
  • Tielrooij, Klaas-Jan
  • Bonn, Mischa
  • Kavokine, Nikita
Evidence is accumulating for the crucial role of a solid's free electrons in the dynamics of solid-liquid interfaces. Liquids induce electronic polarization and drive electric currents as they flow; electronic excitations, in turn, participate in hydrodynamic friction. Yet, the underlying solid-liquid interactions have been lacking a direct experimental probe. Here we study the energy transfer across liquid-graphene interfaces using ultrafast spectroscopy. The graphene electrons are heated up quasi-instantaneously by a visible excitation pulse, and the time evolution of the electronic temperature is then monitored with a terahertz pulse. We observe that water accelerates the cooling of the graphene electrons, whereas other polar liquids leave the cooling dynamics largely unaffected. A quantum theory of solid-liquid heat transfer accounts for the water-specific cooling enhancement through a resonance between the graphene surface plasmon mode and the so-called hydrons-water charge fluctuations-particularly the water libration modes, which allows for efficient energy transfer. Our results provide direct experimental evidence of a solid-liquid interaction mediated by collective modes and support the theoretically proposed mechanism for quantum friction. They further reveal a particularly large thermal boundary conductance for the water-graphene interface and suggest strategies for enhancing the thermal conductivity in graphene-based nanostructures., Open access funding provided by Max Planck Society., We acknowledge financial support from the MaxWater initiative of the Max Planck Society. X.Y. is grateful for support from the China Scholarship Council. K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement number 804349 (ERC StG CUHL), RYC fellowship number RYC-2017-22330 and IAE project PID2019-111673GB-I00. A.P. acknowledges support from the European Commission under the EU Horizon 2020 MSCA-RISE-2019 programme (project 873028 HYDROTRONICS) and from the Leverhulme Trust under grant RPG-2019-363. N.K. acknowledges support from a Humboldt fellowship. The Flatiron Institute is a division of the Simons Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermal conductivity of free-standing double-walled carbon nanotube networks

  • Mehew, Jake D.
  • Timmermans, Marina Y.
  • Saleta Reig, David
  • Sergeant, Stefanie
  • Sledzinska, Marianna
  • Chávez-Angel, Emigdio
  • Gallagher, Emily
  • Sotomayor Torres, C. M.
  • Huyghebaert, C.
  • Tielrooij, Klaas-Jan
Nanomaterials are driving advances in technology due to their oftentimes superior properties over bulk materials. In particular, their thermal properties become increasingly important as efficient heat dissipation is required to realize high-performance electronic devices, reduce energy consumption, and prevent thermal damage. One application where nanomaterials can play a crucial role is extreme ultraviolet (EUV) lithography, where pellicles that protect the photomask from particle contamination have to be transparent to EUV light, mechanically strong, and thermally conductive in order to withstand the heat associated with high-power EUV radiation. Free-standing carbon nanotube (CNT) films have emerged as candidates due to their high EUV transparency and ability to withstand heat. However, the thermal transport properties of these films are not well understood beyond bulk emissivity measurements. Here, we measure the thermal conductivity of free-standing CNT films using all-optical Raman thermometry at temperatures between 300 and 700 K. We find thermal conductivities up to 50 W m–1 K–1 for films composed of double-walled CNTs, which rises to 257 W m–1 K–1 when considering the CNT network alone. These values are remarkably high for randomly oriented CNT networks, roughly seven times that of single-walled CNT films. The enhanced thermal conduction is due to the additional wall, which likely gives rise to additional heat-carrying phonon modes and provides a certain resilience to defects. Our results demonstrate that free-standing double-walled CNT films efficiently dissipate heat, enhancing our understanding of these promising films and how they are suited to applications in EUV lithography., The authors would like to thank the CNT material suppliers Lintec of America, Inc. and Canatu Oy. ICN2 was supported by the Severo Ochoa program from the Spanish MINECO grant no. SEV-2017-0706. K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under grant agreements no. 804349 (ERC StG CUHL) and no. 101069363 (ERC PoC COOLGRAELE), RYC fellowship no. RYC-2017-22330, and IAE project PID2019-111673GB-I00. M.S., E.C.-A., and C.M.S.T. acknowledge funding from the Spanish MICINN project SIP (PGC2018-101743-B-I00). M.S. acknowledges funding from the European Union’s Horizon Europe under grant agreement 101099125., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of negative effective thermal diffusion in gold films

  • Block, Alexander
  • Yu, Renwen
  • Un, Ieng-Wai
  • Varghese, Sebin
  • Liebel, Matz
  • Hulst, Niek F. van
  • Fan, Shanhui
  • Tielrooij, Klaas-Jan
  • Sivan, Yonatan
Ultrafast light-induced spatiotemporal dynamics in metals in the form of electron and/or phonon heating is a fundamental physical process that has tremendous practical relevance. In particular, understanding the resulting lateral heat transport is of key importance for various (opto)electronic applications and thermal management but has attracted little attention. Here, by using scanning ultrafast thermo-modulation microscopy to track the spatiotemporal electron diffusion in thin gold films, we show that a few picoseconds after the optical pump there is unexpected heat flow from phonons to electrons, accompanied by negative effective thermal diffusion, characterized by shrinking of the spatial region with increased temperature. Peculiarly, this occurs on the intermediate time scale, between the few picosecond long thermalization stage and the many picosecond stage dominated by thermoacoustic vibrations. We accurately reproduced these experimental results by calculating the spatiotemporal photothermal response based on the two-temperature model and an improvement of the standard permittivity model for gold. Our findings facilitate the design of nanoscale thermal management strategies in photonic, optoelectronic, and high-frequency electronic devices., ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706. K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Nos. 804349 (ERC StG CUHL) and 101069363 (ERC PoC COOLGRAELE), RYC fellowship No. RYC-2017-22330, and IAE project PID2019-111673GB-I00. M.L. and N.F.v.H. acknowledge support through the RTI2018-099957-J-I00 and PID2021-123814OB-I00 projects funded by MCIN/AEI/10.13039/501100011033/FEDER. ICFO was supported by Spanish MCIN Severo Ochoa program (CEX2019-000910-S), Fundació Privada Cellex, Fundació Privada Mir-Puig, and Generalitat de Catalunya through the CERCA program. I.W. and Y.S. were supported by Israel Science Foundation (ISF) grant (340/2020). S.F. acknowledges the support by a MURI program from the U.S. Army Research Office (Grant No. W911NF-19-1-0279)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatiotemporal microscopy: Shining light on transport phenomena

  • Brinatti Vazquez, Guillermo D.
  • Lo Gerfo Morganti, Giulia
  • Block, Alexander
  • Hulst, Niek F. van
  • Liebel, Matz
  • Tielrooij, Klaas-Jan
Transport phenomena like diffusion, convection, and drift play key roles in the sciences and engineering disciplines. They belong to the most omnipresent and important phenomena in nature that describe the motion of entities such as mass, charge or heat. Understanding and controlling these transport phenomena is crucial for a host of industrial technologies and applications, from cooling nuclear reactors to nanoscale heat-management in the semiconductor industry. For decades, macroscopic transport techniques have been used to access important parameters such as charge mobilities or thermal conductivities. While being powerful, they often require physical contacts, which can lead to unwanted effects. Over the past years, an exciting solution has emerged: a technique called spatiotemporal microscopy (SPTM) that accesses crucial transport phenomena in a contactless, all-optical, fashion. This technique offers powerful advantages in terms of accessible timescales, down to femtoseconds, and length scales, down to nanometres, and, further, selectively observes different species of interest. This tutorial review discusses common experimental configurations of SPTM and explains how they can be implemented by those entering the field. This review highlights the broad applicability of SPTM by presenting several exciting examples of transport phenomena that were unravelled thanks to this technique., GDBV, GLGM, and NFvH acknowledged support received through the MCIN/AEI project PRE2019-091051, the “Severo Ochoa” program for Centers of Excellence in R&D CEX2019-000910-S, Fundació Privada Cellex, Fundació Privada Mir-Puig, and the Generalitat de Catalunya through the CERCA program. NFvH acknowledged the financial support by the European Commission (ERC Advanced Grant 101054846-FastTrack). ML was financially supported by the European Union (ERC, PIRO, grant number: 101076859). ICN2 was supported by the Severo Ochoa program from Spanish MINECO Grant No. SEV-2017-0706. KJT. acknowledged funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 804349 (ERC StG CUHL), RYC fellowship No. RYC-2017-22330 and IAE project PID2019-111673GB-I00., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast Umklapp-assisted electron-phonon cooling in magic-angle twisted bilayer graphene

  • Dudley Mehew, Jake
  • Luque Merino, Rafael
  • Ishizuka, Hiroaki
  • Block, Alexander
  • Díez Mérida, Jaime
  • Díez Carlón, Andrés
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Levitov, Leonid S.
  • Efetov, Dmitri K.
  • Tielrooij, Klaas-Jan
Understanding electron-phonon interactions is fundamentally important and has crucial implications for device applications. However, in twisted bilayer graphene near the magic angle, this understanding is currently lacking. Here, we study electron-phonon coupling using time- and frequency-resolved photovoltage measurements as direct and complementary probes of phonon-mediated hot-electron cooling. We find a remarkable speedup in cooling of twisted bilayer graphene near the magic angle: The cooling time is a few picoseconds from room temperature down to 5 kelvin, whereas in pristine bilayer graphene, cooling to phonons becomes much slower for lower temperatures. Our experimental and theoretical analysis indicates that this ultrafast cooling is a combined effect of superlattice formation with low-energy moiré phonons, spatially compressed electronic Wannier orbitals, and a reduced superlattice Brillouin zone. This enables efficient electron-phonon Umklapp scattering that overcomes electron-phonon momentum mismatch. These results establish twist angle as an effective way to control energy relaxation and electronic heat flow., ICN2 was supported by the Severo Ochoa program from Spanish MINECO grant no. SEV-2017-0706. R.L.M. acknowledges that this project has received funding from the “Secretaria d’Universitats I Recerca de la Generalitat de Catalunya, as well as the European Social Fund (L’FSE inverteix en el teu futur)–FEDER. H.I. acknowledges support from JSPS KAKENHI (grant number JP19K14649). J.D.Mé. acknowledges support from the INphINIT “la Caixa” Foundation (ID 100010434) fellowship programme (LCF/BQ/DI19/11730021). K.W. and T.T. acknowledge support from the JSPS KAKENHI (grant numbers 19H05790, 20H00354, and 21H05233). K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 804349 (ERC StG CUHL), RYC fellowship no. RYC-2017-22330, IAE project PID2019-111673GB-I00 and the FLAG-ERA grant ENPHOCAL, by MICIN with No. PCI2021-122101-2A (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic understanding of the in-plane thermal transport properties of 2H transition metal dichalcogenides

  • Farris, Roberta
  • Hellman, Olle
  • Zanolli, Zeila
  • Saleta Reig, David
  • Varghese, Sebin
  • Ordejón, Pablo
  • Tielrooij, Klaas-Jan
  • Verstraete, Matthieu J.
Transition metal dichalcogenides (TMDs) are a class of layered materials that hold great promise for a wide range of applications. Their practical use can be limited by their thermal transport properties, which have proven challenging to determine accurately, both from a theoretical and experimental perspective. We have conducted a thorough theoretical investigation of the thermal conductivity of four common TMDs, MoSe2, WSe2, MoS2, and WS2, at room temperature, to determine the key factors that influence their thermal behavior. We analyze these materials using ab initio calculations performed with the siesta program, anharmonic lattice dynamics and the Boltzmann transport equation formalism, as implemented in the temperature-dependent effective potentials method. Within this framework, we analyze the microscopic parameters influencing the thermal conductivity, such as the phonon dispersion and the phonon lifetimes. The aim is to precisely identify the origin of differences in thermal conductivity among these canonical TMD materials. We compare their in-plane thermal properties in monolayer and bulk form, and we analyze how the thickness and the chemical composition affect the thermal transport behavior. We showcase how bonding and the crystal structure influence the thermal properties by comparing the TMDs with silicon, reporting the cases of bulk silicon and monolayer silicene. We find that the interlayer bond type (covalent vs. van der Waals) involved in the structure is crucial in the heat transport. In two-dimensional silicene, we observe a reduction by a factor ∼15 compared to the Si bulk thermal conductivity due to the smaller group velocities and shorter phonon lifetimes. In the TMDs, where the group velocities and the phonon bands do not vary significantly passing from the bulk to the monolayer limit, we do not see as strong a decrease in the thermal conductivity: only a factor 2–3. Moreover, our analysis reveals that differences in the thermal conductivity arise from variations in atomic species, bond strengths, and phonon lifetimes. These factors are closely interconnected and collectively impact the overall thermal conductivity. We inspect each of them separately and explain how they influence the heat transport. We also study artificial TMDs with modified masses, in order to assess how the chemistry of the compounds modifies the microscopic quantities and thus the thermal conductivity., R.F. and P.O. acknowledge support by the EU H2020-NMBP-TOIND-2018 project “INTERSECT” (Grant No. 814487) and Grant No. PID2022-139776NB-C62 funded by Spanish MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. R.F. and K.-J.T. acknowledge financial support by the Spanish State Research Agency under Contract No. PID2019-111673GB-I00/AEI/10.13039/501100011033 and the European Union’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 804349 (ERC StG CUHL). M.-J.V. acknowledges funding from ARC project DREAMS (G.A. 21/25-11) funding by the Federation Wallonie Bruxelles and ULiege, Belgium. Z.Z. acknowledges financial support by the Netherlands Sector Plan program 2019-2023 and the research program “Materials for the Quantum Age” (QuMat, registration number 024.005.006), part of the Gravitation program of the Dutch Ministry of Education, Culture and Science (OCW). We acknowledge a PRACE award granting access to MareNostrum4 at Barcelona Supercomputing Center (BSC), Spain and Discoverer in SofiaTech, Bulgaria (OptoSpin Project Id. 2020225411). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant No. CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thickness-dependent elastic softening of few-layer free-standing MoSe2

  • Babacic, Visnja|||0000-0002-6986-550X
  • Saleta Reig, David|||0000-0003-3189-2331
  • Varghese, Sebin|||0000-0001-7204-7121
  • Vasileiadis, Thomas|||0000-0001-7720-8801
  • Coy, Emerson|||0000-0002-4149-9720
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
Few-layer van der Waals (vdW) materials have been extensively investigated in terms of their exceptional electronic, optoelectronic, optical, and thermal properties. Simultaneously, a complete evaluation of their mechanical properties remains an undeniable challenge due to the small lateral sizes of samples and the limitations of experimental tools. In particular, there is no systematic experimental study providing unambiguous evidence on whether the reduction of vdW thickness down to few layers results in elastic softening or stiffening with respect to the bulk. In this work, micro-Brillouin light scattering is employed to investigate the anisotropic elastic properties of single-crystal free-standing 2H-MoSe as a function of thickness, down to three molecular layers. The so-called elastic size effect, that is, significant and systematic elastic softening of the material with decreasing numbers of layers is reported. In addition, this approach allows for a complete mechanical examination of few-layer membranes, that is, their elasticity, residual stress, and thickness, which can be easily extended to other vdW materials. The presented results shed new light on the ongoing debate on the elastic size-effect and are relevant for performance and durability of implementation of vdW materials as resonators, optoelectronic, and thermoelectric devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Observation of giant and tunable thermal diffusivity of a Dirac fluid at room temperature

  • Block, Alexander|||0000-0001-9288-5405
  • Principi, Alessandro|||0000-0002-4776-6965
  • Hesp, Niels C. H.|||0000-0001-8111-9780
  • Cummings, Aron|||0000-0003-2307-497X
  • Liebel, Matz|||0000-0001-6220-3143
  • Watanabe, Kenji|||0000-0003-3701-8119
  • Taniguchi, Takashi|||0000-0002-1467-3105
  • Roche, Stephan|||0000-0003-0323-4665
  • Koppens, Frank|||0000-0001-9764-6120
  • van Hulst, Niek F.|||0000-0003-4630-1776
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Conducting materials typically exhibit either diffusive or ballistic charge transport. When electron-electron interactions dominate, a hydrodynamic regime with viscous charge flow emerges -. More stringent conditions eventually yield a quantum-critical Dirac-fluid regime, where electronic heat can flow more efficiently than charge -. However, observing and controlling the flow of electronic heat in the hydrodynamic regime at room temperature has so far remained elusive. Here we observe heat transport in graphene in the diffusive and hydrodynamic regimes, and report a controllable transition to the Dirac-fluid regime at room temperature, using carrier temperature and carrier density as control knobs. We introduce the technique of spatiotemporal thermoelectric microscopy with femtosecond temporal and nanometre spatial resolution, which allows for tracking electronic heat spreading. In the diffusive regime, we find a thermal diffusivity of roughly 2,000 cm 2 s -1, consistent with charge transport. Moreover, within the hydrodynamic time window before momentum relaxation, we observe heat spreading corresponding to a giant diffusivity up to 70,000 cm 2 s -1, indicative of a Dirac fluid. Our results offer the possibility of further exploration of these interesting physical phenomena and their potential applications in nanoscale thermal management. Spatiotemporal thermoelectric microscopy enables the observation of electronic heat flow in graphene in diffusive and hydrodynamic regimes at room temperature, as well as a controlled transition from a Fermi liquid to Dirac fluid.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hot-carrier cooling in high-quality graphene is intrinsically limited by optical phonons

  • Pogna, Eva A. A.|||0000-0003-4779-3549
  • Jia, Xiaoyu
  • Principi, Alessandro|||0000-0002-4776-6965
  • Block, Alexander|||0000-0001-9288-5405
  • Banszerus, Luca|||0000-0002-1855-1287
  • Zhang, Jincan
  • Liu, Xiaoting
  • Sohier, Thibault
  • Forti, Stiven|||0000-0002-8939-3175
  • Soundarapandian, Karuppasamy|||0000-0002-9664-9095
  • Terrés, Bernat
  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Trovatello, Chiara|||0000-0002-8150-9743
  • Coletti, Camilla|||0000-0002-8134-7633
  • Koppens, Frank|||0000-0001-9764-6120
  • Bonn, Mischa|||0000-0001-6851-8453
  • Wang, Hai I.|||0000-0003-0940-3984
  • van Hulst, Niek F..|||0000-0003-4630-1776
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Peng, Hailin|||0000-0003-1569-0238
  • Liu, Zhongfan|||0000-0003-0065-7988
  • Stampfer, Christoph|||0000-0002-4958-7362
  • Cerullo, Giulio|||0000-0002-9534-2702
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand the relaxation dynamics after photoexcitation. These dynamics contain a sub-100 fs thermalization phase, which occurs through carrier-carrier scattering and leads to a carrier distribution with an elevated temperature. This is followed by a picosecond cooling phase, where different phonon systems play a role: graphene acoustic and optical phonons, and substrate phonons. Here, we address the cooling pathway of two technologically relevant systems, both consisting of high-quality graphene with a mobility >10 000 cm 2 V -1 s -1 and environments that do not efficiently take up electronic heat from graphene: WSe-encapsulated graphene and suspended graphene. We study the cooling dynamics using ultrafast pump-probe spectroscopy at room temperature. Cooling via disorder-assisted acoustic phonon scattering and out-of-plane heat transfer to substrate phonons is relatively inefficient in these systems, suggesting a cooling time of tens of picoseconds. However, we observe much faster cooling, on a time scale of a few picoseconds. We attribute this to an intrinsic cooling mechanism, where carriers in the high-energy tail of the hot-carrier distribution emit optical phonons. This creates a permanent heat sink, as carriers efficiently rethermalize. We develop a macroscopic model that explains the observed dynamics, where cooling is eventually limited by optical-to-acoustic phonon coupling. These fundamental insights will guide the development of graphene-based optoelectronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrically tunable nonequilibrium optical response of graphene

  • Pogna, Eva A. A.|||0000-0003-4779-3549
  • Tomadin, Andrea
  • Balci, Osman|||0000-0003-2766-2197
  • Soavi, Giancarlo|||0000-0003-2434-2251
  • Paradisanos, Ioannis
  • Guizzardi, Michele
  • Pedrinazzi, Paolo
  • Mignuzzi, Sandro
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Polini, Marco
  • Ferrari, Andrea C.|||0000-0003-0907-9993
  • Cerullo, Giulio|||0000-0002-9534-2702
The ability to tune the optical response of a material via electrostatic gating is crucial for optoelectronic applications, such as electro-optic modulators, saturable absorbers, optical limiters, photodetectors, and transparent electrodes. The band structure of single layer graphene (SLG), with zero-gap, linearly dispersive conduction and valence bands, enables an easy control of the Fermi energy, E , and of the threshold for interband optical absorption. Here, we report the tunability of the SLG nonequilibrium optical response in the near-infrared (1000-1700 nm/0.729-1.240 eV), exploring a range of E from -650 to 250 meV by ionic liquid gating. As E increases from the Dirac point to the threshold for Pauli blocking of interband absorption, we observe a slow-down of the photobleaching relaxation dynamics, which we attribute to the quenching of optical phonon emission from photoexcited charge carriers. For E exceeding the Pauli blocking threshold, photobleaching eventually turns into photoinduced absorption, because the hot electrons' excitation increases the SLG absorption. The ability to control both recovery time and sign of the nonequilibrium optical response by electrostatic gating makes SLG ideal for tunable saturable absorbers with controlled dynamics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling heat transport and dissipation in suspended MoSe2 from bulk to monolayer

  • Saleta Reig, David|||0000-0003-3189-2331
  • Varghese, Sebin|||0000-0001-7204-7121
  • Farris, Roberta|||0000-0001-6710-0100
  • Block, Alexander|||0000-0001-9288-5405
  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Hellman, Olle|||0000-0002-3453-2975
  • Woźniak, Pawel|||0000-0002-2753-5959
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • van Hulst, Niek F.|||0000-0003-4630-1776
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Understanding heat flow in layered transition metal dichalcogenide (TMD) crystals is crucial for applications exploiting these materials. Despite significant efforts, several basic thermal transport properties of TMDs are currently not well understood, in particular how transport is affected by material thickness and the material's environment. This combined experimental-theoretical study establishes a unifying physical picture of the intrinsic lattice thermal conductivity of the representative TMD MoSe. Thermal conductivity measurements using Raman thermometry on a large set of clean, crystalline, suspended crystals with systematically varied thickness are combined with ab initio simulations with phonons at finite temperature. The results show that phonon dispersions and lifetimes change strongly with thickness, yet the thinnest TMD films exhibit an in-plane thermal conductivity that is only marginally smaller than that of bulk crystals. This is the result of compensating phonon contributions, in particular heat-carrying modes around ≈0.1 THz in (sub)nanometer thin films, with a surprisingly long mean free path of several micrometers. This behavior arises directly from the layered nature of the material. Furthermore, out-of-plane heat dissipation to air molecules is remarkably efficient, in particular for the thinnest crystals, increasing the apparent thermal conductivity of monolayer MoSe by an order of magnitude. These results are crucial for the design of (flexible) TMD-based (opto-)electronic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Milliwatt terahertz harmonic generation from topological insulator metamaterials

  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Principi, Alessandro|||0000-0002-4776-6965
  • Saleta Reig, David|||0000-0003-3189-2331
  • Block, Alexander|||0000-0001-9288-5405
  • Varghese, Sebin|||0000-0001-7204-7121
  • Schreyeck, Steffen
  • Brunner, Karl
  • Karczewski, Grzegorz
  • Ilyakov, Igor|||0000-0002-5928-7996
  • Ponomaryov, Oleksiy
  • de Oliveira, Thales V. A. G.|||0000-0002-4886-0654
  • Chen, Min|||0000-0001-5230-360X
  • Deinert, Jan-Christoph|||0000-0001-6211-0158
  • Gómez Carbonell, Carmen
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Molenkamp, Laurens W.
  • Kiessling, Tobias
  • Astakhov, Georgy V.|||0000-0003-1807-3534
  • Kovalev, Sergey|||0000-0002-2290-1016
Achieving efficient, high-power harmonic generation in the terahertz spectral domain has technological applications, for example, in sixth generation (6G) communication networks. Massless Dirac fermions possess extremely large terahertz nonlinear susceptibilities and harmonic conversion efficiencies. However, the observed maximum generated harmonic power is limited, because of saturation effects at increasing incident powers, as shown recently for graphene. Here, we demonstrate room-temperature terahertz harmonic generation in a BiSe topological insulator and topological-insulator-grating metamaterial structures with surface-selective terahertz field enhancement. We obtain a third-harmonic power approaching the milliwatt range for an incident power of 75 mW-an improvement by two orders of magnitude compared to a benchmarked graphene sample. We establish a framework in which this exceptional performance is the result of thermodynamic harmonic generation by the massless topological surface states, benefiting from ultrafast dissipation of electronic heat via surface-bulk Coulomb interactions. These results are an important step towards on-chip terahertz (opto)electronic applications. Topological insulator metamaterials bring nonlinear terahertz photonic technology a step closer by producing a third-harmonic output power close to a milliwatt.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fabrication and characterization of large-area suspended MoSe2 crystals down to the monolayer

  • Varghese, Sebin|||0000-0001-7204-7121
  • Saleta Reig, David|||0000-0003-3189-2331
  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Block, Alexander|||0000-0001-9288-5405
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Many layered materials, such as graphene and transition metal dichalcogenides, can be exfoliated down to atomic or molecular monolayers. These materials exhibit exciting material properties that can be exploited for several promising device concepts. Thinner materials lead to an increased surface-to-volume ratio, with mono- and bi-layers being basically pure surfaces. Thin crystals containing more than two layers also often behave as an all-surface material, depending on the physical property of interest. As a result, flakes of layered materials are typically highly sensitive to their environment, which is undesirable for a broad range of studies and potential devices. Material systems based on suspended flakes overcome this issue, yet often require complex fabrication procedures. Here, we demonstrate the relatively straightforward fabrication of exfoliated MoSe flakes down to the monolayer, suspended over unprecedentedly large holes with a diameter of 15 µm. We describe our fabrication methods in detail, present characterization measurements of the fabricated structures, and, finally, exploit these suspended flakes for accurate optical absorption measurements.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hot carriers in graphene-fundamentals and applications

  • Massicotte, Mathieu|||0000-0003-2802-2829
  • Soavi, Giancarlo|||0000-0003-2434-2251
  • Principi, Alessandro|||0000-0002-4776-6965
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Hot charge carriers in graphene exhibit fascinating physical phenomena, whose understanding has improved greatly over the past decade. They have distinctly different physical properties compared to, for example, hot carriers in conventional metals. This is predominantly the result of graphene's linear energy-momentum dispersion, its phonon properties, its all-interface character, and the tunability of its carrier density down to very small values, and from electron- to hole-doping. Since a few years, we have witnessed an increasing interest in technological applications enabled by hot carriers in graphene. Of particular interest are optical and optoelectronic applications, where hot carriers are used to detect (photodetection), convert (nonlinear photonics), or emit (luminescence) light. Graphene-enabled systems in these application areas could find widespread use and have a disruptive impact, for example in the field of data communication, high-frequency electronics, and industrial quality control. The aim of this review is to provide an overview of the most relevant physics and working principles that are relevant for applications exploiting hot carriers in graphene.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron cooling in graphene enhanced by plasmon-hydron resonance

  • Yu, Xiaoqing|||0000-0002-3303-0965
  • Principi, Alessandro|||0000-0002-4776-6965
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Bonn, Mischa|||0000-0001-6851-8453
  • Kavokine, Nikita|||0000-0002-8037-7996
Evidence is accumulating for the crucial role of a solid's free electrons in the dynamics of solid-liquid interfaces. Liquids induce electronic polarization and drive electric currents as they flow; electronic excitations, in turn, participate in hydrodynamic friction. Yet, the underlying solid-liquid interactions have been lacking a direct experimental probe. Here we study the energy transfer across liquid-graphene interfaces using ultrafast spectroscopy. The graphene electrons are heated up quasi-instantaneously by a visible excitation pulse, and the time evolution of the electronic temperature is then monitored with a terahertz pulse. We observe that water accelerates the cooling of the graphene electrons, whereas other polar liquids leave the cooling dynamics largely unaffected. A quantum theory of solid-liquid heat transfer accounts for the water-specific cooling enhancement through a resonance between the graphene surface plasmon mode and the so-called hydrons-water charge fluctuations-particularly the water libration modes, which allows for efficient energy transfer. Our results provide direct experimental evidence of a solid-liquid interaction mediated by collective modes and support the theoretically proposed mechanism for quantum friction. They further reveal a particularly large thermal boundary conductance for the water-graphene interface and suggest strategies for enhancing the thermal conductivity in graphene-based nanostructures. Ultrafast spectroscopy experiments demonstrate that graphene electrons can transfer energy directly to liquid water with no mediation from the crystal lattice as their collective plasmon oscillation excites water's molecular charge fluctuations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A pre-time-zero spatiotemporal microscopy technique for the ultrasensitive determination of the thermal diffusivity of thin films

  • Varghese, Sebin|||0000-0001-7204-7121
  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Block, Alexander|||0000-0001-9288-5405
  • Saleta Reig, David|||0000-0003-3189-2331
  • Woźniak, Pawel|||0000-0002-2753-5959
  • Farris, Roberta|||0000-0001-6710-0100
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • van Hulst, Niek F.|||0000-0003-4630-1776
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Diffusion is one of the most ubiquitous transport phenomena in nature. Experimentally, it can be tracked by following point spreading in space and time. Here, we introduce a spatiotemporal pump-probe microscopy technique that exploits the residual spatial temperature profile obtained through the transient reflectivity when probe pulses arrive before pump pulses. This corresponds to an effective pump-probe time delay of 13 ns, determined by the repetition rate of our laser system (76 MHz). This pre-time-zero technique enables probing the diffusion of long-lived excitations created by previous pump pulses with nanometer accuracy and is particularly powerful for following in-plane heat diffusion in thin films. The particular advantage of this technique is that it enables quantifying thermal transport without requiring any material input parameters or strong heating. We demonstrate the direct determination of the thermal diffusivities of films with a thickness of around 15 nm, consisting of the layered materials MoSe2 (0.18 cm2/s), WSe2 (0.20 cm2/s), MoS2 (0.35 cm2/s), and WS2 (0.59 cm2/s). This technique paves the way for observing nanoscale thermal transport phenomena and tracking diffusion of a broad range of species.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microscopic understanding of the in-plane thermal transport properties of 2H transition metal dichalcogenides

  • Farris, Roberta|||0000-0001-6710-0100
  • Hellman, Olle|||0000-0002-3453-2975
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Saleta Reig, David|||0000-0003-3189-2331
  • Varghese, Sebin|||0000-0001-7204-7121
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
Transition metal dichalcogenides (TMDs) are a class of layered materials that hold great promise for a wide range of applications. Their practical use can be limited by their thermal transport properties, which have proven challenging to determine accurately, both from a theoretical and experimental perspective. We have conducted a thorough theoretical investigation of the thermal conductivity of four common TMDs, MoSe2, WSe2, MoS2, and WS2, at room temperature, to determine the key factors that influence their thermal behavior. We analyze these materials using ab initio calculations performed with the siesta program, anharmonic lattice dynamics and the Boltzmann transport equation formalism, as implemented in the temperature-dependent effective potentials method. Within this framework, we analyze the microscopic parameters influencing the thermal conductivity, such as the phonon dispersion and the phonon lifetimes. The aim is to precisely identify the origin of differences in thermal conductivity among these canonical TMD materials. We compare their in-plane thermal properties in monolayer and bulk form, and we analyze how the thickness and the chemical composition affect the thermal transport behavior. We showcase how bonding and the crystal structure influence the thermal properties by comparing the TMDs with silicon, reporting the cases of bulk silicon and monolayer silicene. We find that the interlayer bond type (covalent vs. van der Waals) involved in the structure is crucial in the heat transport. In two-dimensional silicene, we observe a reduction by a factor ∼15 compared to the Si bulk thermal conductivity due to the smaller group velocities and shorter phonon lifetimes. In the TMDs, where the group velocities and the phonon bands do not vary significantly passing from the bulk to the monolayer limit, we do not see as strong a decrease in the thermal conductivity: only a factor 2-3. Moreover, our analysis reveals that differences in the thermal conductivity arise from variations in atomic species, bond strengths, and phonon lifetimes. These factors are closely interconnected and collectively impact the overall thermal conductivity. We inspect each of them separately and explain how they influence the heat transport. We also study artificial TMDs with modified masses, in order to assess how the chemistry of the compounds modifies the microscopic quantities and thus the thermal conductivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Spatiotemporal Microscopy, Shining Light on Transport Phenomena

  • Vazquez, Guillermo D. Brinatti
  • Morganti, Giulia Lo Gerfo
  • Block, Alexander|||0000-0001-9288-5405
  • van Hulst, Niek F.|||0000-0003-4630-1776
  • Liebel, Matz|||0000-0001-6220-3143
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Transport phenomena like diffusion, convection, and drift play key roles in the sciences and engineering disciplines. They belong to the most omnipresent and important phenomena in nature that describe the motion of entities such as mass, charge or heat. Understanding and controlling these transport phenomena is crucial for a host of industrial technologies and applications, from cooling nuclear reactors to nanoscale heat-management in the semiconductor industry. For decades, macroscopic transport techniques have been used to access important parameters such as charge mobilities or thermal conductivities. While being powerful, they often require physical contacts, which can lead to unwanted effects. Over the past years, an exciting solution has emerged: a technique called spatiotemporal microscopy (SPTM) that accesses crucial transport phenomena in a contactless, all-optical, fashion. This technique offers powerful advantages in terms of accessible timescales, down to femtoseconds, and length scales, down to nanometres, and, further, selectively observes different species of interest. This tutorial review discusses common experimental configurations of SPTM and explains how they can be implemented by those entering the field. This review highlights the broad applicability of SPTM by presenting several exciting examples of transport phenomena that were unravelled thanks to this technique.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast Umklapp-assisted electron-phonon cooling in magic-angle twisted bilayer graphene

  • Mehew, Jake Dudley|||0000-0002-8859-9374
  • Luque Merino, Rafael|||0000-0002-5072-4117
  • Ishizuka, Hiroaki|||0000-0002-5719-4315
  • Block, Alexander|||0000-0001-9288-5405
  • Díez Mérida, Jaime|||0000-0002-9811-4318
  • Díez Carlón, Andrés|||0000-0001-8124-4549
  • Watanabe, Kenji|||0000-0003-3701-8119
  • Taniguchi, Takashi|||0000-0002-1467-3105
  • Levitov, Leonid S.|||0000-0002-4268-731X
  • Efetov, Dmitri K.|||0000-0001-5862-0462
  • Tielrooij, Klaas-Jan|||0000-0002-0055-6231
Understanding electron-phonon interactions is fundamentally important and has crucial implications for device applications. However, in twisted bilayer graphene near the magic angle, this understanding is currently lacking. Here, we study electron-phonon coupling using time- and frequency-resolved photovoltage measurements as direct and complementary probes of phonon-mediated hot-electron cooling. We find a remarkable speedup in cooling of twisted bilayer graphene near the magic angle: The cooling time is a few picoseconds from room temperature down to 5 kelvin, whereas in pristine bilayer graphene, cooling to phonons becomes much slower for lower temperatures. Our experimental and theoretical analysis indicates that this ultrafast cooling is a combined effect of superlattice formation with low-energy moiré phonons, spatially compressed electronic Wannier orbitals, and a reduced superlattice Brillouin zone. This enables efficient electron-phonon Umklapp scattering that overcomes electron-phonon momentum mismatch. These results establish twist angle as an effective way to control energy relaxation and electronic heat flow.