Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Suppression of star formation in low-mass galaxies caused by the reionization of their local neighbourhood

  • Dawoodbhoy, Taha
  • Shapiro, Paul R.
  • Ocvirk, Pierre
  • Aubert, Dominique
  • Gillet, Nicolas
  • Choi, Jun Hwan
  • Iliev, Ilian T.
  • Teyssier, Romain
  • Yepes Alonso, Gustavo
  • Gottlöber, Stefan
  • D'Aloisio, Anson
  • Park, Hyunbae
  • Hoffman, Yehuda
Photoheating associated with reionization suppressed star formation in low-mass galaxies. Reionization was inhomogeneous, however, affecting different regions at different times. To establish the causal connection between reionization and suppression, we must take this local variation into account. We analyze the results of CoDa ('Cosmic Dawn') I, the first fully coupled radiation-hydrodynamical simulation of reionization and galaxy formation in the Local Universe, in a volume large enough to model reionization globally but with enough resolving power to follow all atomic-cooling galactic halos in that volume. For every halo identified at a given time, we find the redshift at which the surrounding IGM reionized, along with its instantaneous star formation rate ('SFR') and baryonic gas-to-dark matter ratio (Mgas/MDM). The average SFR per halo with M < 109M⊙ was steady in regions not yet reionized, but declined sharply following local reionization. For M > 1010M⊙, this SFR continued through local reionization, increasing with time, instead. For 109M⊙ < M < 1010M⊙, the SFR generally increased modestly through reionization, followed by a modest decline. In general, halo SFRs were higher for regions that reionized earlier. A similar pattern was found forMgas/MDM, which declined sharply following local reionization forM < 109M⊙. Local reionization time correlates with local matter overdensity, which determines the local rates of structure formation and ionizing photon consumption. The earliest patches to develop structure and reionize ultimately produced more stars than they needed to finish and maintain their own reionization, exporting their 'surplus' starlight to help reionize regions that developed structure later., This research benifittted from the support of NSF AST-1009799, NASA NNX11AE09G, and SURP/JPL Project Nbr 1492788 and 1515294 to PRS. Post-processing was performed on the Eos, Rhea and Lens clusters. Auxiliary simulations used the PRACE-3IP project (FP7 RI-312763) resource curie-hybrid based in France at Très Grand Centre de Calcul. The CoDa IDM2048 gadget simulation was performed at LRZ Munich. The analysis presented here was conducted on the Stampede supercomputer at the Texas Advanced Computing Center of the University of Texas at Austin with NSF XSEDE grant TG-AST090005. PO acknowledges support from the French ANR funded project ORAGE (ANR-14-CE33-0016). NG and DA acknowledge funding from the French ANR for project ANR-12-JS05-0001 (EMMA). ITI was supported by the Science and Technology Facilities Council [grant numbers ST/F002858/1 and ST/I000976/1] and the Southeast Physics Network (SEPNet). SG and YH acknowledge support by DFG grant GO 563/21-1. YH has been partially supported by the Israel Science Foundation (1013/12). GY also acknowledges support from MINECO-FEDER under research grants AYA2012-31101 and AYA2015-63810-P
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On determining defects identity in carbon nanotubes using charge probes

  • Kostyrko, Tomasz
  • García-Suárez, Víctor M.
  • Wawrzyniak-Adamczewska, M.
  • Ferrer, Jaime
A metallic carbon nanotube with point-like defects under influence of a local potential due to a point charge probe is theoretically studied. A combination of density functional theory and the Landauer-Büttiker formalism is used to compute the electronic conductance in the zero-voltage limit. From a collection of the results obtained by varying the probe position around different defects the conductance maps are created. The analysis of the conductance maps allows us to formulate conditions under which several point-like defects (the Stone-Wales defect, a simple carbon vacancy, hydrogen-passivated vacancies) can be distinguished and identified in experiments with the help of scanning probe microscopy., This work has been supported by the National Science Centre under the contract DEC-2012/07/B/ST3/03412. We acknowledge that the results of this research have been achieved using the PRACE-3IP project (FP7 RI-312763) resource JUROPA based in Germany at Julich. We also thank the Spanish MICINN for the Grant No. FIS2012-34858 (V.M.G.S. and J.F.) and the Ramón y Cajal Fellowship No. RYC-2010-06053 (V.M.G.S.)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High temperature ferromagnetism in a GdAg2 monolayer

  • Ormaza, Maider
  • Fernández, Laura
  • Ilyn, Max
  • Magaña, Ana
  • Xu, Bo
  • Verstraete, Matthieu J.
  • Gastaldo, Michele
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Ayuela, Andrés
  • Vitali, Lucia
  • Blanco-Rey, María
  • Schiller, Frederik
  • Ortega, J. Enrique
et al., Materials that exhibit ferromagnetism, interfacial stability, and tunability are highly desired for the realization of emerging magnetoelectronic phenomena in heterostructures. Here we present the GdAg monolayer alloy, which possesses all such qualities. By combining X-ray absorption, Kerr effect, and angle-resolved photoemission with ab initio calculations, we have investigated the ferromagnetic nature of this class of Gd-based alloys. The Curie temperature can increase from 19 K in GdAu to a remarkably high 85 K in GdAg. We find that the exchange coupling between Gd atoms is barely affected by their full coordination with noble metal atoms, and instead, magnetic coupling is effectively mediated by noble metal-Gd hybrid s,p-d bands. The direct comparison between isostructural GdAu and GdAg monolayers explains how the higher degree of surface confinement and electron occupation of such hybrid s,p-d bands promote the high Curie temperature in the latter. Finally, the chemical composition and structural robustness of the GdAg alloy has been demonstrated by interfacing them with organic semiconductors or magnetic nanodots. These results encourage systematic investigations of rare-earth/noble metal surface alloys and interfaces, in order to exploit them in magnetoelectronic applications., This work was supported by the Spanish Government (MAT2013-46593-C6-4-P, MAT2013-46593-C6-5-P, FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P), the Basque Government (IT621-13,IT627-13,IT756-13), the Diputación de Gipuzkoa (RF-0061/2015), and the Deutsche Forschungsgemeinschaft (SFB 1083 “Structure and Dynamics of Internal Interfaces”). A.Mu., M.A.V., and M.G. acknowledge the Severo Ochoa program SEV-2013-0295. B.X. and M.J.V. acknowledge two A.R.C. grants (TheMoTherm 10/15-03 and AIMED 15/19-09) from the Communauté Francaise de ̧ Belgique. Computer time was made available by PRACE-2IP and 3IP (EU FP7 Grant No. RI-283493 and RI-312763), CECI, SEGI-ULg, and the DIPC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced effects in the electronic and spin properties of a monolayer of ferromagnetic GdAg2

  • Correa, Alexander
  • Xu, Bo
  • Verstraete, Matthieu J.
  • Vitali, Lucia
We report on the structural, electronic and magnetic properties of a monolayer of GdAg2, forming a moiré pattern on Ag(111). Combining scanning tunneling microscopy and ab initio spin-polarized calculations, we show that the electronic band structure can be shifted linearly via thermal controlled strain of the intra-layer atomic distance in the range of 1-7%, leading to lateral hetero-structuring. Furthermore, the coupling of the incommensurable GdAg2 alloy layer to the Ag(111) substrate leads to spatially varying atomic relaxation causing subsurface layer buckling, texturing of the electronic and spin properties, and inhomogeneity of the magnetic anisotropy energy across the layer. These results provide perspectives for control of electronic properties and magnetic ordering in atomically-thin layers., AC and LV acknowledge the financial support of the Spanish ministry of economy (MAT2013-46593-C6-4-P). MJhhV and BX acknowledge two ARC grants (TheMoTherm #10/15-03 and AIMED # 15/19-09) from the Communauté Française de Belgique, a PDR project (GA T.1077.15) from the Fonds National pour la Recherche Scientifique (Belgium). Computer time was provided by CECI, SEGI, Zenobe/CENAERO (Walloon region GA 1117545), and PRACE-2IP and 3IP (EU FP7 GA RI-283493 and RI-312763) on EPCC Archer., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid quantum anomalous Hall effect at graphene-oxide interfaces

  • Zanolli, Zeila
  • Niu, C.
  • Bihlmayer, Gustav
  • Mokrousov, Y.
  • Mavropoulos, Phivos
  • Verstraete, Matthieu J.
  • Blügel, Stefan
Interfaces are ubiquitous in materials science, and in devices in particular. As device dimensions are constantly shrinking, understanding the physical properties emerging at interfaces is crucial to exploit them for applications, here for spintronics. Using first-principles techniques and Monte Carlo simulations, we investigate the mutual magnetic interaction at the interface between graphene and an antiferromagnetic semiconductor BaMnO3. We find that graphene deeply affects the magnetic state of the substrate, down to several layers below the interface, by inducing an overall magnetic softening, and switching the in-plane magnetic ordering from antiferromagnetic to ferromagnetic. The graphene- BaMnO3 system presents a Rashba gap 300 times larger than in pristine graphene, leading to a flavor of quantum anomalous Hall effect (QAHE), a hybrid QAHE, characterized by the coexistence of metallic and topological insulating states. These findings could be exploited to fabricate devices that use graphene to control the magnetic configuration of a substrate., Z.Z. acknowledges financial support by the Deutsche Forschungsgemeinschaft (DFG) Grant No. ZA 780/3-1, the Ramon y Cajal MINECO program (Grant No. RYC-2016-19344), the EC H2020-EINFRA-5-2015 MaX Center of Excellence (Grant No. 676598), the Spanish MINECO (Grant No. FIS2015-64886-C5-3-P), the CERCA programme of the Generalitat de Catalunya (Grant No. 2017SGR1506), and by the Severo Ochoa programme (MINECO, Grant No. SEV-2013-0295). M.J.V. acknowledges funding from the Communauté française de Belgique ARC grant (Grant No. AIMED 15/19-09). Y.M. acknowledges funding from the German Research Foundation (Deutsche Forschungsgemeinschaft), Grant No. MO 1731/5-1. This work has been also financially supported by the Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Center SPP 1666. The authors acknowledge computer time from the PRACE-3IP and 4IP on resources Lindgren, Archer, and Salomon (EU Grants No. RI-312763 and No. 653838), CECI, SEGI-ULg and Zenobe hosted by CENAERO (Grant No. GA 1117545), the JARA-HPC projects (No. jara0088, No. JIAS16, and No. JHPC39), the JARA-HPC Vergabegremium and VSR commission on the supercomputer JURECA at Forschungszentrum Jülich., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Parallel Mesh Partitioning in Alya, Technical report 202, PRACE

  • Artigues, Antoni
  • Houzeaux, Guillaume|||0000-0002-2592-1426
The Alya System is the BSC simulation code for multi-physics problems [1]. It is based on a Variational Multiscale Finite Element Method for unstructured meshes. Work distribution is achieved by partitioning the original mesh into subdomains (submeshes). This pre-partition step has until now been done in serial by only one process, using the metis library [2]. This is a huge bottleneck when larger meshes with millions of elements have to be partitioned. This is due to the data not fitting in the memory of a single computing node and in the cases where the data does fit; Alya takes too long in the partitioning step. In this document we explain the tasks done to design, implement and test a new parallel partitioning algorithm for Alya. In this algorithm a subset of the workers, is in charge of partition the mesh in parallel, using the parmetis library [3]. Partitioning workers, load consecutive parts of the main mesh, with a parallel space partitioning bin structure [4], capable of obtaining the adjacent boundary elements of their respective submeshes. With this local mesh, each of the partitioning workers is able to create its local element adjacency graph and to partition the mesh. We have validated our new algorithm using a Navier-Stokes problem on a small cube mesh of 1000 elements. Then we performed a scalability test on a 30M element mesh to check if the time to partition the mesh is reduced proportionally with the number of partitioning workers. We have also done a comparison between metis and parmetis, the balancing of the element distribution among the domains, to test how the use of many partitioning workers to partition the mesh affects the scalability of Alya. We have noticed in these tests that it’s better to use fewer partitioning workers to partition the mesh. Finally we have two sections explaining the results and the future work that has to be done in order to finalise and improve the parallel partition algorithm., This work was financially supported by the PRACE project funded in part by the EUs 7th Framework Programme (FP7/2007-2013) under grant agreement no. RI-312763.
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Parallel Mesh Partitioning in Alya, Technical report 202, PRACE

  • Artigues, Antoni
  • Houzeaux, Guillaume
The Alya System is the BSC simulation code for multi-physics problems [1]. It is based on a Variational Multiscale Finite Element Method for unstructured meshes. Work distribution is achieved by partitioning the original mesh into subdomains (submeshes). This pre-partition step has until now been done in serial by only one process, using the metis library [2]. This is a huge bottleneck when larger meshes with millions of elements have to be partitioned. This is due to the data not fitting in the memory of a single computing node and in the cases where the data does fit; Alya takes too long in the partitioning step. In this document we explain the tasks done to design, implement and test a new parallel partitioning algorithm for Alya. In this algorithm a subset of the workers, is in charge of partition the mesh in parallel, using the parmetis library [3]. Partitioning workers, load consecutive parts of the main mesh, with a parallel space partitioning bin structure [4], capable of obtaining the adjacent boundary elements of their respective submeshes. With this local mesh, each of the partitioning workers is able to create its local element adjacency graph and to partition the mesh. We have validated our new algorithm using a Navier-Stokes problem on a small cube mesh of 1000 elements. Then we performed a scalability test on a 30M element mesh to check if the time to partition the mesh is reduced proportionally with the number of partitioning workers. We have also done a comparison between metis and parmetis, the balancing of the element distribution among the domains, to test how the use of many partitioning workers to partition the mesh affects the scalability of Alya. We have noticed in these tests that it’s better to use fewer partitioning workers to partition the mesh. Finally we have two sections explaining the results and the future work that has to be done in order to finalise and improve the parallel partition algorithm., This work was financially supported by the PRACE project funded in part by the EUs 7th Framework Programme (FP7/2007-2013) under grant agreement no. RI-312763., Postprint (published version)
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

H trapping and mobility in nanostructured tungsten grain boundaries: a combined experimental and theoretical approach

  • González Pascual, César|||0000-0001-5118-3597
  • Panizo Laíz, Miguel
  • Gordillo Garcia, Nuria|||0000-0003-2335-738X
  • Guerrero Contreras, Carlos Luis
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Munnik, F.
  • Piaggi, Pablo M.
  • Bringa, E.M.
  • Iglesias Pastrana, Roberto|||0000-0002-6406-7883
  • Perlado Martín, José Manuel|||0000-0001-6907-4153
  • Gonzalez Arrabal, Raquel|||0000-0002-4955-1925
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten

  • Valles Alberdi, Gonzalo
  • Panizo Laíz, Miguel
  • González Pascual, César|||0000-0001-5118-3597
  • Martín Bragado, Ignacio
  • Gonzalez Arrabal, Raquel|||0000-0002-4955-1925
  • Gordillo Garcia, Nuria|||0000-0003-2335-738X
  • Iglesias Pastrana, Roberto|||0000-0002-6406-7883
  • Guerrero Contreras, Carlos Luis
  • Perlado Martín, José Manuel|||0000-0001-6907-4153
  • Rivera de Mena, Antonio Juan|||0000-0002-8484-5099
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spectroscopic properties of few-layer tin chalcogenides

  • Dewandre, Antoine
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Grobert, Nicole
  • Zanolli, Zeila|||0000-0003-0860-600X
Stable structures of layered SnS and SnSe and their associated electronic and vibrational spectra are predicted using first-principles DFT calculations. The calculations show that both materials undergo a phase transformation upon thinning whereby the in-plane lattice parameters ratio a/b converges towards 1, similar to the high-temperature behaviour observed for their bulk counterparts. The electronic properties of layered SnS and SnSe evolve to an almost symmetric dispersion whilst the gap changes from indirect to direct. Characteristic signatures in the phonon dispersion curves and surface phonon states where only atoms belonging to surface layers vibrate should be observable experimentally.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical signatures of defect centers in transition metal dichalcogenide monolayers

  • Melo, Pedro Miguel M. C. de
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
Even the best quality 2D materials have non-negligible concentrations of vacancies and impurities. It is critical to understand and quantify how defects change intrinsic properties, and use this knowledge to generate functionality. This challenge can be addressed by employing many-body perturbation theory to obtain the optical absorption spectra of defected transition metal dichalcogenides. Herein metal vacancies, which are largely unreported, show a larger set of polarized excitons than chalcogenide vacancies, introducing localized excitons in the sub-optical-gap region, whose wave functions and spectra make them good candidates as quantum emitters. Despite the strong interaction with substitutional defects, the spin texture and pristine exciton energies are preserved, enabling grafting and patterning in optical detectors, as the full optical-gap region remains available. A redistribution of excitonic weight between the A and B excitons is visible in both cases and may allow the quantification of the defect concentration. This work establishes excitonic signatures to characterize defects in 2D materials and highlights vacancies as qubit candidates for quantum computing.