Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid quantum anomalous Hall effect at graphene-oxide interfaces

  • Zanolli, Zeila
  • Niu, C.
  • Bihlmayer, Gustav
  • Mokrousov, Y.
  • Mavropoulos, Phivos
  • Verstraete, Matthieu J.
  • Blügel, Stefan
Interfaces are ubiquitous in materials science, and in devices in particular. As device dimensions are constantly shrinking, understanding the physical properties emerging at interfaces is crucial to exploit them for applications, here for spintronics. Using first-principles techniques and Monte Carlo simulations, we investigate the mutual magnetic interaction at the interface between graphene and an antiferromagnetic semiconductor BaMnO3. We find that graphene deeply affects the magnetic state of the substrate, down to several layers below the interface, by inducing an overall magnetic softening, and switching the in-plane magnetic ordering from antiferromagnetic to ferromagnetic. The graphene- BaMnO3 system presents a Rashba gap 300 times larger than in pristine graphene, leading to a flavor of quantum anomalous Hall effect (QAHE), a hybrid QAHE, characterized by the coexistence of metallic and topological insulating states. These findings could be exploited to fabricate devices that use graphene to control the magnetic configuration of a substrate., Z.Z. acknowledges financial support by the Deutsche Forschungsgemeinschaft (DFG) Grant No. ZA 780/3-1, the Ramon y Cajal MINECO program (Grant No. RYC-2016-19344), the EC H2020-EINFRA-5-2015 MaX Center of Excellence (Grant No. 676598), the Spanish MINECO (Grant No. FIS2015-64886-C5-3-P), the CERCA programme of the Generalitat de Catalunya (Grant No. 2017SGR1506), and by the Severo Ochoa programme (MINECO, Grant No. SEV-2013-0295). M.J.V. acknowledges funding from the Communauté française de Belgique ARC grant (Grant No. AIMED 15/19-09). Y.M. acknowledges funding from the German Research Foundation (Deutsche Forschungsgemeinschaft), Grant No. MO 1731/5-1. This work has been also financially supported by the Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Center SPP 1666. The authors acknowledge computer time from the PRACE-3IP and 4IP on resources Lindgren, Archer, and Salomon (EU Grants No. RI-312763 and No. 653838), CECI, SEGI-ULg and Zenobe hosted by CENAERO (Grant No. GA 1117545), the JARA-HPC projects (No. jara0088, No. JIAS16, and No. JHPC39), the JARA-HPC Vergabegremium and VSR commission on the supercomputer JURECA at Forschungszentrum Jülich., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin states protected from intrinsic electron–phonon coupling reaching 100 ns lifetime at room temperature in MoSe2

  • Ersfeld, Manfred
  • Volmer, Frank
  • Melo, Pedro Miguel M. C. de
  • Winter, Robin de
  • Heithoff, Maximilian
  • Zanolli, Zeila
  • Stampfer, Christoph
  • Verstraete, Matthieu J.
  • Beschoten, Bernd
We present time-resolved Kerr rotation measurements, showing spin lifetimes of over 100 ns at room temperature in monolayer MoSe2. These long lifetimes are accompanied by an intriguing temperature-dependence of the Kerr amplitude, which increases with temperature up to 50 K and then abruptly switches sign. Using ab initio simulations, we explain the latter behavior in terms of the intrinsic electron–phonon coupling and the activation of transitions to secondary valleys. The phonon-assisted scattering of the photoexcited electron–hole pairs prepares a valley spin polarization within the first few ps after laser excitation. The sign of the total valley magnetization, and thus the Kerr amplitude, switches as a function of temperature, as conduction and valence band states exhibit different phonon-mediated intervalley scattering rates. However, the electron–phonon scattering on the ps time scale does not provide an explanation for the long spin lifetimes. Hence, we deduce that the initial spin polarization must be transferred into spin states, which are protected from the intrinsic electron–phonon coupling, and are most likely resident charge carriers, which are not part of the itinerant valence or conduction band states., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 785219. It was also supported by the Helmholtz Nanoelectronic Facility (HNF)57 at the Forschungszentrum Jülich. P.M.M.C.M. and M.J.V. acknowledge funding by the Belgian FNRS (PDR G.A. T.1077.15-1/7) and the Communauté Francaise de Belgique (ARC AIMED G.A. 15/19-09). ̧ Z.Z. acknowledges financial support by the Ramon y Cajal program (RYC-2016-19344), the CERCA programme of the Generalitat de Catalunya (grant 2017SGR1506), the Severo Ochoa programme (MINECO, SEV-2017-0706), and the EC H2020-INFRAEDI-2018-2020 MaX “Materials Design at the Exascale” CoE (grant No. 824143). Computational resources have been provided by the Consortium des Equipements de Calcul Intensif (CECI), funded by FRS-FNRS G.A. 2.5020.11; the Zenobe Tier-1 supercomputer is funded by the Walloon Region under G.A. 1117545 and by a PRACE-3IP DECI grant 2DSpin on Beskow (G.A. 653838 of H2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic properties of few-layer tin chalcogenides

  • Dewandre, Antoine
  • Verstraete, Matthieu J.
  • Grobert, Nicole
  • Zanolli, Zeila
Stable structures of layered SnS and SnSe and their associated electronic and vibrational spectra are predicted using first-principles DFT calculations. The calculations show that both materials undergo a phase transformation upon thinning whereby the in-plane lattice parameters ratio a/b converges towards 1, similar to the high-temperature behaviour observed for their bulk counterparts. The electronic properties of layered SnS and SnSe evolve to an almost symmetric dispersion whilst the gap changes from indirect to direct. Characteristic signatures in the phonon dispersion curves and surface phonon states where only atoms belonging to surface layers vibrate should be observable experimentally., The authors gratefully acknowledge funding from the Belgian Fonds National de la Recherche Scientifique FNRS (PDR T.1 077.15-1/7) and the Communauté Française de Belgique (ARC AIMED 15/19-09). Computational resources have been provided by the Consortium des Equipements de Calcul Intensif (CECI), funded by FRS-FNRS G.A. 2.502 0.11; the Tier-1 supercomputer of the Fédération Wallonie-Bruxelles, funded by the Walloon Region under G.A. 1117545; and by PRACE-IP DECI grants, on ARCHER, Beskow and Salomon (ThermoSpin, ACEID, OPTOGEN, and INTERPHON 3IP G.A. FP7 RI-312763 and 13 G.A. 653838 of H2020). ZZ acknowledges financial support by the Ramon y Cajal program (RYC-2016-19344), the Spanish program PGC2018-096955-B-C43 (MICIU/AEI/DEDER,UE) the CERCA programme of the Generalitat de Catalunya (Grant 2017SGR1506), and by the Severo Ochoa programme (MINECO, SEV-2017-0706). We are also grateful to the Royal Society, the European Research Council (ERC-2009-StG-240500-DEDIGROWTH), and the Engineering and Physical Sciences Research Council block grants for their financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous interlayer compression in commensurately stacked van der Waals heterostructures

  • Pike, Nicholas A.
  • Dewandre, Antoine
  • Chaltin, François
  • García-González, Laura
  • Pillitteri, Salvatore
  • Ratz, Thomas
  • Verstraete, Matthieu J.
Interest in layered two-dimensional materials, particularly stacked heterostructures of transition-metal dichalcogenides, has led to the need for a better understanding of the structural and electronic changes induced by stacking. Here, we investigate the effects of idealized heterostructuring, with periodic commensurate stacking, on the structural, electronic, and vibrational properties, when compared to the counterpart bulk transition-metal dichalcogenide. We find that in heterostructures with dissimilar chalcogen species there is a strong compression of the interlayer spacing, compared to the bulk compounds. This compression of the heterostructure is caused by an increase in the strength of the induced polarization interaction between the layers, but not a full charge transfer. We argue that this effect is real, not due to the imposed commensurability, and should be observable in heterostructures combining different chalcogens. Interestingly, we find that incommensurate stacking of Ti-based dichalcogenides can lead to the stabilization of the charge-density wave phonon mode, which is unstable in the 1T phase at low temperature. Mixed Ti- and Zr-based heterostructures are still dynamically unstable, but TiS2/ZrS2 becomes ferroelectric., N.A.P. and M.J.V. gratefully acknowledge funding from the Belgian Fonds National de la Recherche Scientifique (FNRS) under Grants PDR T.1077.15-1/7 and T.0103.19-ALPS. M.J.V. acknowledges a FNRS sabbatical “OUT” Grant at ICN2 Barcelona, as well as ULiège and the Fédération Wallonie-Bruxelles (ARC AIMED G.A. 15/19-09). Computational resources have been provided by the Consortium des Equipements de Calcul Intensif (CECI), funded by FRS-FNRS G.A. 2.5020.11; the Zenobe Tier-1 supercomputer funded by the Gouvernement Wallon G.A. 1117545; and by a PRACE-3IP DECI grants 2DSpin and Pylight on Beskow, and RemEPI on Archer (G.A. 653838 of H2020). This publication is based upon work of the MELODICA project, funded by the EU FLAG-ERA_JTC2017 call.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TB2J: A python package for computing magnetic interaction parameters

  • He, Xu
  • Helbig, N.
  • Verstraete, Matthieu J.
  • Bousquet, Eric
We present TB2J, a Python package for the automatic computation of magnetic interactions, including exchange and Dzyaloshinskii–Moriya, between atoms of magnetic crystals from the results of density functional calculations. The program is based on the Green's function method with the local rigid spin rotation treated as a perturbation. As input, the package uses the output of either Wannier90, which is interfaced with many density functional theory packages, or of codes based on localized orbitals. One of the main interests of the code is that it requires only one first-principles electronic structure calculation in the non-relativistic case (or three in the relativistic case) and from the primitive cell only to obtain the magnetic interactions up to long distances, instead of first-principles calculations of many different magnetic configurations and large supercells. The output of TB2J can be used directly for the adiabatic magnon band structure and spin dynamics calculations. A minimal user input is needed, which allows for easy integration into high-throughput workflows. Program summary: Program Title: TB2J CPC Library link to program files: https://doi.org/10.17632/dm45fcn69d.1 Developer's repository link: https://github.com/mailhexu/TB2J Code Ocean capsule: https://codeocean.com/capsule/6486145 Licensing provisions: BSD 2-clause Programming language: Python Nature of problem: TB2J is a package for the computing of parameters in the extended Heisenberg model of the magnetic interaction, including the isotropic exchange, anisotropic exchange and Dzyaloshinskii–Moriya interactions from first principles result. It can make use of the Wannier function Hamiltonian, which can be constructed from many first principles codes, or localized orbital based codes. Solution method: It uses the magnetic force theorem and takes the rigid spin rotation as a perturbation to the electronic structure. The energy variation is calculated from the Green's functions from tight-binding like Hamiltonian based on Wannier functions or localized orbitals. Additional comments including restrictions and unusual features: Isotropic exchange, anisotropic exchange, and Dzyaloshinskii–Moriya interactions can all be computed with the input of many DFT codes through the interface of Wannier90, or directly from localized orbital codes. The magnetic interaction parameters up to any distance can be computed from one DFT calculation. A minimum user-input is required which provides a black-box like experience. It generates output for several spin dynamics codes and thus bridges the first principles electronic structure simulation with the large scale spin dynamics simulation., This work has been funded by the Communauté Française de Belgique (ARC AIMED G.A. 15/19-09). XH thanks the support by the EU H2020-NMBP-TO-IND-2018 project “INTERSECT” (Grant No. 814487). EB thanks the FRS-FNRS for support, as does MJV for an “out” sabbatical grant to ICN2 Barcelona in 2018–2019. The authors acknowledge the CECI supercomputer facilities funded by the F.R.S-FNRS (Grant No. 2.5020.1) and the Tier-1 supercomputer of the Fédération Wallonie-Bruxelles funded by the Walloon Region (Grant No. 1117545). Computing time was also provided by PRACE-3IP DECI grants 2DSpin and Pylight on Beskow (G.A. 653838 of H2020).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Subdividing triangular and quadrilateral meshes in parallel to approximate curved geometries

  • Gargallo-Peiró, Abel
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Roca, Xevi
A parallel distributed approach to refine a mesh while preserving the curvature of a target geometry is presented. Our approach starts by generating a coarse linear mesh of the computational domain. Second, the former coarse mesh is curved to match the curvature of the target geometry. Then, the curved mesh is partitioned and the subdomain meshes are sent to the slaves. Finally, the curved elements are uniformly subdivided in parallel targeting the geometry approximated by the curved mesh. The result is a distributed finer linear mesh featuring improved geometric accuracy. The key ingredient of our implementation is to approximate the target geometry as a linear mesh equipped with an elemental field corresponding to an element-wise polynomial geometry representation. Thus, the distribution of the curved geometry is equivalent to partitioning the linear mesh and sending the subdomain meshes and the elemental fields to the slaves. The main application of the obtained finer linear mesh is to compute in parallel steady state flow solutions on real topographies. The qualitative results show that for 2D and 3D steady state flow solutions, on real and synthetic topographies, our parallel subdivision approach mitigates the artificial artifacts that might appear with standard straight-sided subdivision methods. We also check the parallel performance of the implementation by performing a weak scalability test in 2D., This work was financially supported by the PRACE project funded in part by the EUs Horizon 2020 research and innovation program (2014-2020) under grant agreement 653838. This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme under grant agreement No 715546. The work of the corresponding author has been partially supported by the Spanish Ministerio de Economía y Competitividad under the personal grant agreement RYC- 2015-01633., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large-scale CFD simulations of the transitional and turbulent regime for the large human airways during rapid inhalation

  • Calmet, Hadrien|||0000-0001-5443-761X
  • Gambaruto, Alberto M.
  • Bates, Alister J.
  • Vázquez, Mariano|||0000-0002-2526-6708
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Doorly, Denis J.
The dynamics of unsteady flow in the human large airways during a rapid inhalation were investigated using highly detailed large-scale computational fluid dynamics on a subject-specific geometry. The simulations were performed to resolve all the spatial and temporal scales of the flow, thanks to the use of massive computational resources. A highly parallel finite element code was used, running on two supercomputers, solving the transient incompressible Navier–Stokes equations on unstructured meshes. Given that the finest mesh contained 350 million elements, the study sets a precedent for large-scale simulations of the respiratory system, proposing an analysis strategy for mean flow, fluctuations and wall shear stresses on a rapid and short inhalation (a so-called sniff). The geometry used encompasses the exterior face and the airways from the nasal cavity, through the trachea and up to the third lung bifurcation; it was derived from a contrast-enhanced computed tomography (CT) scan of a 48-year-old male. The transient inflow produces complex flows over a wide range of Reynolds numbers (Re). Thanks to the high fidelity simulations, many features involving the flow transition were observed, with the level of turbulence clearly higher in the throat than in the nose. Spectral analysis revealed turbulent characteristics persisting downstream of the glottis, and were captured even with a medium mesh resolution. However a fine mesh resolution was found necessary in the nasal cavity to observe transitional features. This work indicates the potential of large-scale simulations to further understanding of airway physiological mechanics, which is essential to guide clinical diagnosis; better understanding of the flow also has implications for the design of interventions such as aerosol drug delivery., We acknowledge PRACE for awarding us access to resource FERMI based in Italy at Bologna hosted by Cineca. This work was financially supported by the PRACE project Pra04 693 (2011050693 to the Fourth PRACE regular call). The second author gratefully acknowledges support from project ‘MatComPhys’ under the European Research Executive Agency FP7-PEOPLE-2011- IEF framework. The third author was supported by the Engineering and Physical Sciences Research Council [grant number EP/ M506345/1]., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

BSC best practices in professional training and teaching for the HPC ecosystem

  • Sancho Samsó, María Ribera|||0000-0002-5904-8709
This paper outlines the key components of the European HPC ecosystems, analyses the major challenges as well as corresponding specific technical focus areas which needs to be addressed in European strategic research agenda for HPC leadership. Further the need for education and training is clearly identified and the BSC approach, BSC model and best practices are presented and analyzed. Further a generalization and analysis of the approach are given., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

SHAPE Project Vortex Bladeless: Parallel multi-code coupling for Fluid-Structure Interaction in Wind Energy Generation

  • Cajas García, Juan Carlos
  • Houzeaux, Guillaume|||0000-0002-2592-1426
  • Yáñez, David J.
  • Mier-Torrecilla, Mónica
Vortex-Bladeless is a Spanish SME whose objective is to develop a new concept of wind turbine without blades called Vortex or vorticity wind turbine. This design represents a new paradigm in wind energy and aims to eliminate or reduce many of the existing problems in conventional generators. Due to the significant difference in the project concept, its scope is different from conventional wind turbines. It is particularly suitable for offshore configuration and it could be exploited in wind farms and in environments usually closed to existing ones due to the presence of high intensity winds. The device is composed of a single structural component, and given its morphological simplicity, its manufacturing, transport, storage and installation has clear advantages. The new wind turbine design has no bearings, gears, etcetera, so the maintenance requirements could be drastically reduced and their lifespan is expected to be higher than traditional wind turbines. It is clear that the proposed device is of prime interest, and that scientific investigation of the response of this wind energy generator under different operation scenarios is highly desirable. Thus, the objective of this SHAPE project is to develop the needed tools to simulate Fluid-Structure Interaction (FSI) problems and to reproduce the experimental results for scaled models of the Vortex-Bladeless device. In order to do so the Alya code, developed at the Barcelona Supercomputing Center, is adapted to perform the Fluid-Structure Interaction (FSI) problem simulation. The obtained numerical results match satisfactorily with the experimental results reported., This work was financially supported by the PRACE project funded in part by the EU’s Horizon 2020 research and innovation programme (2014-2020) under grant agreement 653838.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Parallel mesh partitioning based on space filling curves

  • Borrell, Ricard
  • Cajas García, Juan Carlos
  • Mira Martínez, Daniel
  • Taha, A.
  • Koric, S.
  • Vázquez, Mariano|||0000-0002-2526-6708
  • Houzeaux, Guillaume|||0000-0002-2592-1426
Larger supercomputers allow the simulation of more complex phenomena with increased accuracy. Eventually this requires finer and thus also larger geometric discretizations. In this context, and extrapolating to the Exascale paradigm, meshing operations such as generation, deformation, adaptation/regeneration or partition/load balance, become a critical issue within the simulation workflow. In this paper we focus on mesh partitioning. In particular, we present a fast and scalable geometric partitioner based on Space Filling Curves (SFC), as an alternative to the standard graph partitioning approach. We have avoided any computing or memory bottleneck in the algorithm, while we have imposed that the solution achieved is independent (discounting rounding off errors) of the number of parallel processes used to compute it. The performance of the SFC-based partitioner presented has been demonstrated using up to 4096 CPU-cores in the Blue Waters supercomputer., The research leading to these results has received funding from the European Union Horizon 2020 Programme (2014-2020) and the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (grant agreement No. 689772). This work is also part of the PRAC "Simulations of Aircraft Engines" supported by the National Science Foundation. It has also been financially supported by the PRACE preparatory access projects funded in part by the EU Horizon 2020 research and innovation programme (2014-2020) under grant agreement 653838. J.C. Cajas acknowledges the nancial sup- port of the `Consejo Nacional de Ciencia y Tecnolog a (CONACyT, M exico)' grant number 231588 290790. Ricard Borrell and Daniel Mira acknowledge the Juan de la Cierva postdoctoral grants with codes IJCI-2014-21034 and IJCI-2015-26686, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Subdividing triangular and quadrilateral meshes in parallel to approximate curved geometries

  • Gargallo-Peiró, Abel
  • Houzeaux, Guillaume
  • Roca, Xevi
A parallel distributed approach to refine a mesh while preserving the curvature of a target geometry is presented. Our approach starts by generating a coarse linear mesh of the computational domain. Second, the former coarse mesh is curved to match the curvature of the target geometry. Then, the curved mesh is partitioned and the subdomain meshes are sent to the slaves. Finally, the curved elements are uniformly subdivided in parallel targeting the geometry approximated by the curved mesh. The result is a distributed finer linear mesh featuring improved geometric accuracy. The key ingredient of our implementation is to approximate the target geometry as a linear mesh equipped with an elemental field corresponding to an element-wise polynomial geometry representation. Thus, the distribution of the curved geometry is equivalent to partitioning the linear mesh and sending the subdomain meshes and the elemental fields to the slaves. The main application of the obtained finer linear mesh is to compute in parallel steady state flow solutions on real topographies. The qualitative results show that for 2D and 3D steady state flow solutions, on real and synthetic topographies, our parallel subdivision approach mitigates the artificial artifacts that might appear with standard straight-sided subdivision methods. We also check the parallel performance of the implementation by performing a weak scalability test in 2D., This work was financially supported by the PRACE project funded in part by the EUs Horizon 2020 research and innovation program (2014-2020) under grant agreement 653838. This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme under grant agreement No 715546. The work of the corresponding author has been partially supported by the Spanish Ministerio de Economía y Competitividad under the personal grant agreement RYC- 2015-01633., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parallel mesh partitioning based on space filling curves

  • Borrell, Ricard
  • Cajas García, Juan Carlos
  • Mira Martínez, Daniel
  • Taha, A.
  • Koric, S.
  • Vázquez, Mariano
  • Houzeaux, Guillaume
Larger supercomputers allow the simulation of more complex phenomena with increased accuracy. Eventually this requires finer and thus also larger geometric discretizations. In this context, and extrapolating to the Exascale paradigm, meshing operations such as generation, deformation, adaptation/regeneration or partition/load balance, become a critical issue within the simulation workflow. In this paper we focus on mesh partitioning. In particular, we present a fast and scalable geometric partitioner based on Space Filling Curves (SFC), as an alternative to the standard graph partitioning approach. We have avoided any computing or memory bottleneck in the algorithm, while we have imposed that the solution achieved is independent (discounting rounding off errors) of the number of parallel processes used to compute it. The performance of the SFC-based partitioner presented has been demonstrated using up to 4096 CPU-cores in the Blue Waters supercomputer., The research leading to these results has received funding from the European Union Horizon 2020 Programme (2014-2020) and the Brazilian Ministry of Science, Technology and Innovation through Rede Nacional de Pesquisa (RNP) under the HPC4E Project (grant agreement No. 689772). This work is also part of the PRAC "Simulations of Aircraft Engines" supported by the National Science Foundation. It has also been financially supported by the PRACE preparatory access projects funded in part by the EU Horizon 2020 research and innovation programme (2014-2020) under grant agreement 653838. J.C. Cajas acknowledges the nancial sup- port of the `Consejo Nacional de Ciencia y Tecnolog a (CONACyT, M exico)' grant number 231588 290790. Ricard Borrell and Daniel Mira acknowledge the Juan de la Cierva postdoctoral grants with codes IJCI-2014-21034 and IJCI-2015-26686, respectively., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large-scale CFD simulations of the transitional and turbulent regime for the large human airways during rapid inhalation

  • Calmet, Hadrien
  • Gambaruto, Alberto M.
  • Bates, Alister J.
  • Vázquez, Mariano
  • Houzeaux, Guillaume
  • Doorly, Denis J.
The dynamics of unsteady flow in the human large airways during a rapid inhalation were investigated using highly detailed large-scale computational fluid dynamics on a subject-specific geometry. The simulations were performed to resolve all the spatial and temporal scales of the flow, thanks to the use of massive computational resources. A highly parallel finite element code was used, running on two supercomputers, solving the transient incompressible Navier–Stokes equations on unstructured meshes. Given that the finest mesh contained 350 million elements, the study sets a precedent for large-scale simulations of the respiratory system, proposing an analysis strategy for mean flow, fluctuations and wall shear stresses on a rapid and short inhalation (a so-called sniff). The geometry used encompasses the exterior face and the airways from the nasal cavity, through the trachea and up to the third lung bifurcation; it was derived from a contrast-enhanced computed tomography (CT) scan of a 48-year-old male. The transient inflow produces complex flows over a wide range of Reynolds numbers (Re). Thanks to the high fidelity simulations, many features involving the flow transition were observed, with the level of turbulence clearly higher in the throat than in the nose. Spectral analysis revealed turbulent characteristics persisting downstream of the glottis, and were captured even with a medium mesh resolution. However a fine mesh resolution was found necessary in the nasal cavity to observe transitional features. This work indicates the potential of large-scale simulations to further understanding of airway physiological mechanics, which is essential to guide clinical diagnosis; better understanding of the flow also has implications for the design of interventions such as aerosol drug delivery., We acknowledge PRACE for awarding us access to resource FERMI based in Italy at Bologna hosted by Cineca. This work was financially supported by the PRACE project Pra04 693 (2011050693 to the Fourth PRACE regular call). The second author gratefully acknowledges support from project ‘MatComPhys’ under the European Research Executive Agency FP7-PEOPLE-2011- IEF framework. The third author was supported by the Engineering and Physical Sciences Research Council [grant number EP/ M506345/1]., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

SHAPE Project Vortex Bladeless: Parallel multi-code coupling for Fluid-Structure Interaction in Wind Energy Generation

  • Cajas García, Juan Carlos
  • Houzeaux, Guillaume
  • Yáñez, David J.
  • Mier-Torrecilla, Mónica
Vortex-Bladeless is a Spanish SME whose objective is to develop a new concept of wind turbine without blades called Vortex or vorticity wind turbine. This design represents a new paradigm in wind energy and aims to eliminate or reduce many of the existing problems in conventional generators. Due to the significant difference in the project concept, its scope is different from conventional wind turbines. It is particularly suitable for offshore configuration and it could be exploited in wind farms and in environments usually closed to existing ones due to the presence of high intensity winds. The device is composed of a single structural component, and given its morphological simplicity, its manufacturing, transport, storage and installation has clear advantages. The new wind turbine design has no bearings, gears, etcetera, so the maintenance requirements could be drastically reduced and their lifespan is expected to be higher than traditional wind turbines. It is clear that the proposed device is of prime interest, and that scientific investigation of the response of this wind energy generator under different operation scenarios is highly desirable. Thus, the objective of this SHAPE project is to develop the needed tools to simulate Fluid-Structure Interaction (FSI) problems and to reproduce the experimental results for scaled models of the Vortex-Bladeless device. In order to do so the Alya code, developed at the Barcelona Supercomputing Center, is adapted to perform the Fluid-Structure Interaction (FSI) problem simulation. The obtained numerical results match satisfactorily with the experimental results reported., This work was financially supported by the PRACE project funded in part by the EU’s Horizon 2020 research and innovation programme (2014-2020) under grant agreement 653838., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

BSC best practices in professional training and teaching for the HPC ecosystem

  • Sancho Samsó, María Ribera
This paper outlines the key components of the European HPC ecosystems, analyses the major challenges as well as corresponding specific technical focus areas which needs to be addressed in European strategic research agenda for HPC leadership. Further the need for education and training is clearly identified and the BSC approach, BSC model and best practices are presented and analyzed. Further a generalization and analysis of the approach are given., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spin states protected from intrinsic electron-phonon coupling reaching 100 ns lifetime at room temperature in MoSe₂

  • Ersfeld, Manfred
  • Volmer, Frank|||0000-0003-3526-2687
  • Melo, Pedro Miguel M. C. de
  • Winter, Robin de
  • Heithoff, Maximilian
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Stampfer, Cristoph
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Beschoten, Bernd|||0000-0003-2359-2718
We present time-resolved Kerr rotation measurements, showing spin lifetimes of over 100 ns at room temperature in monolayer MoSe. These long lifetimes are accompanied by an intriguing temperature-dependence of the Kerr amplitude, which increases with temperature up to 50 K and then abruptly switches sign. Using ab initio simulations, we explain the latter behavior in terms of the intrinsic electron-phonon coupling and the activation of transitions to secondary valleys. The phonon-assisted scattering of the photoexcited electron-hole pairs prepares a valley spin polarization within the first few ps after laser excitation. The sign of the total valley magnetization, and thus the Kerr amplitude, switches as a function of temperature, as conduction and valence band states exhibit different phonon-mediated intervalley scattering rates. However, the electron-phonon scattering on the ps time scale does not provide an explanation for the long spin lifetimes. Hence, we deduce that the initial spin polarization must be transferred into spin states, which are protected from the intrinsic electron-phonon coupling, and are most likely resident charge carriers, which are not part of the itinerant valence or conduction band states.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid quantum anomalous Hall effect at graphene-oxide interfaces

  • Zanolli, Zeila|||0000-0003-0860-600X
  • Niu, C.
  • Bihlmayer, G.|||0000-0002-6615-1122
  • Mokrousov, Y.
  • Mavropoulos, Phivos|||0000-0002-0205-8025
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Blügel, Stefan
Interfaces are ubiquitous in materials science, and in devices in particular. As device dimensions are constantly shrinking, understanding the physical properties emerging at interfaces is crucial to exploit them for applications, here for spintronics. Using first-principles techniques and Monte Carlo simulations, we investigate the mutual magnetic interaction at the interface between graphene and an antiferromagnetic semiconductor BaMnO3. We find that graphene deeply affects the magnetic state of the substrate, down to several layers below the interface, by inducing an overall magnetic softening, and switching the in-plane magnetic ordering from antiferromagnetic to ferromagnetic. The graphene-BaMnO3 system presents a Rashba gap 300 times larger than in pristine graphene, leading to a flavor of quantum anomalous Hall effect (QAHE), a hybrid QAHE, characterized by the coexistence of metallic and topological insulating states. These findings could be exploited to fabricate devices that use graphene to control the magnetic configuration of a substrate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spectroscopic properties of few-layer tin chalcogenides

  • Dewandre, Antoine
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Grobert, Nicole
  • Zanolli, Zeila|||0000-0003-0860-600X
Stable structures of layered SnS and SnSe and their associated electronic and vibrational spectra are predicted using first-principles DFT calculations. The calculations show that both materials undergo a phase transformation upon thinning whereby the in-plane lattice parameters ratio a/b converges towards 1, similar to the high-temperature behaviour observed for their bulk counterparts. The electronic properties of layered SnS and SnSe evolve to an almost symmetric dispersion whilst the gap changes from indirect to direct. Characteristic signatures in the phonon dispersion curves and surface phonon states where only atoms belonging to surface layers vibrate should be observable experimentally.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

TB2J, a python package for computing magnetic interaction parameters

  • He, Xu|||0000-0003-4437-0567
  • Helbig, Nicole|||0000-0002-5786-9976
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
  • Bousquet, Eric|||0000-0002-9290-3463
We present TB2J, a Python package for the automatic computation of magnetic interactions, including exchange and Dzyaloshinskii-Moriya, between atoms of magnetic crystals from the results of density functional calculations. The program is based on the Green's function method with the local rigid spin rotation treated as a perturbation. As input, the package uses the output of either Wannier90, which is interfaced with many density functional theory packages, or of codes based on localized orbitals. One of the main interests of the code is that it requires only one first-principles electronic structure calculation in the non-relativistic case (or three in the relativistic case) and from the primitive cell only to obtain the magnetic interactions up to long distances, instead of first-principles calculations of many different magnetic configurations and large supercells. The output of TB2J can be used directly for the adiabatic magnon band structure and spin dynamics calculations. A minimal user input is needed, which allows for easy integration into high-throughput workflows.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical signatures of defect centers in transition metal dichalcogenide monolayers

  • Melo, Pedro Miguel M. C. de
  • Zanolli, Zeila|||0000-0003-0860-600X
  • Verstraete, Matthieu J.|||0000-0001-6921-5163
Even the best quality 2D materials have non-negligible concentrations of vacancies and impurities. It is critical to understand and quantify how defects change intrinsic properties, and use this knowledge to generate functionality. This challenge can be addressed by employing many-body perturbation theory to obtain the optical absorption spectra of defected transition metal dichalcogenides. Herein metal vacancies, which are largely unreported, show a larger set of polarized excitons than chalcogenide vacancies, introducing localized excitons in the sub-optical-gap region, whose wave functions and spectra make them good candidates as quantum emitters. Despite the strong interaction with substitutional defects, the spin texture and pristine exciton energies are preserved, enabling grafting and patterning in optical detectors, as the full optical-gap region remains available. A redistribution of excitonic weight between the A and B excitons is visible in both cases and may allow the quantification of the defect concentration. This work establishes excitonic signatures to characterize defects in 2D materials and highlights vacancies as qubit candidates for quantum computing.