Pasar al contenido principal

DESARROLLO DE TECNOLOGIAS DE FLUJO CONTINUO BASADAS EN SISTEMAS MICROFLUIDICOS PARA LA PRODUCCION DE NANOPARTICULAS Y APLICACION EN EL TRATAMIENTO DE INFECCIONES TOPICAS CAUSA

RTI2018-099019-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas-directed production of noble metal-magnetic heteronanostructures in continuous fashion: Application in catalysis

  • Larrea, Ángel
  • Eguizabal, Adela
  • Sebastián, Víctor
Complex nanomaterials produced by scale-up batch processes lack suitable control of shape, size distribution, chemical composition, and quality, because heat and mass transfer are seriously affected as the reactor volume increases. Here we use a novel continuous synthesis procedure, the active gas–liquid segmented flow, to produce noble metal-magnetic heteronanostructures with enormous interest in the fields of catalysis, biomedicine, environmental sensors, food monitoring, and chemical analysis. The microreactor technology proposed scales down the reaction volume to gain advantage of the large surface area to volume ratio with respect to conventional batch-type reactors, improving heat and mass transport and, consequently, promoting a uniform heating and mixing. The gas phase was introduced in the chemical reactor as gas slugs of nanoliter scale with a dual role: (1) passive mixing and (2) chemical directing agent to tune the crystallization of nanostructures in a continuous fashion. The shape, size, and magnetic properties of the resulting heteronanostructures, as well as the density, size, and composition of noble metal nanoparticles were tuned to show the versatility of the proposed approach in a timeline of 4 min. We demonstrated that the produced nanostructures provide excellent catalytic properties in the catalyzed hydrogenation of nitrophenols to aminophenols. Electron microscopy, UV–vis spectroscopy, and cyclic voltammetry studies showed the remarkable catalytic performance of the produced heteronanostructures., The EU CIG-Marie Curie under the REA Grant No. 321642 and the Programa Estatal De I+D+I Orientada A Los Retos De La Sociedad, En El Marco Del Plan Estatal De Investigacion Cientifica Y Tecnica Y De Innovacion 2017-2020 (RTI2018- 099019-A-I00) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microflow nanoprecipitation of positively charged gastroresistant polymer nanoparticles of Eudragit® RS100: A study of fluid dynamics and chemical parameters

  • Yus, Cristina
  • Arruebo, Manuel
  • Irusta, Silvia
  • Sebastián, Víctor
This article belongs to the Special Issue Advances in Microreactor Devices for Biomedicine, Nanoparticle Synthesis, Catalysis and Energy Processes., The objective of the present work was to produce gastroresistant Eudragit® RS100 nanoparticles by a reproducible synthesis approach that ensured mono-disperse nanoparticles under the size of 100 nm. Batch and micromixing nanoprecipitation approaches were selected to produce the demanded nanoparticles, identifying the critical parameters affecting the synthesis process. To shed some light on the formulation of the targeted nanoparticles, the effects of particle size and homogeneity of fluid dynamics, and physicochemical parameters such as polymer concentration, type of solvent, ratio of solvent to antisolvent, and total flow rate were studied. The physicochemical characteristics of resulting nanoparticles were studied applying dynamic light scattering (DLS) particle size analysis and electron microscopy imaging. Nanoparticles produced using a micromixer demonstrated a narrower and more homogenous distribution than the ones obtained under similar conditions in conventional batch reactors. Besides, fluid dynamics ensured that the best mixing conditions were achieved at the highest flow rate. It was concluded that nucleation and growth events must also be considered to avoid uncontrolled nanoparticle growth and evolution at the collection vial. Further, rifampicin-encapsulated nanoparticles were prepared using both approaches, demonstrating that the micromixing-assisted approach provided an excellent control of the particle size and polydispersity index. Not only the micromixing-assisted nanoprecipitation promoted a remarkable control in the nanoparticle formulation, but also it enhanced drug encapsulation efficiency and loading, as well as productivity. To the best of our knowledge, this was the very first time that drug-loaded Eudragit® RS100 nanoparticles (NPs) were produced in a continuous fashion under 100 nm (16.5 ± 4.3 nm) using microreactor technology. Furthermore, we performed a detailed analysis of the influence of various fluid dynamics and physicochemical parameters on the size and uniformity of the resulting nanoparticles. According to these findings, the proposed methodology can be a useful approach to synthesize a myriad of nanoparticles of alternative polymers., Financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00 is gratefully acknowledged. This research was also funded by the Spanish Ministry of Economy and Competitiveness (grant number CTQ2017-84473-R). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling particle size and release kinetics in the sustained delivery of oral antibiotics using pH-independent mucoadhesive polymers

  • Yus, Cristina
  • Irusta, Silvia
  • Sebastián, Víctor
  • Arruebo, Manuel
Copolymers synthesized from acrylic acid and methacrylic acid used as gastroprotective and mucoadhesive enteric coatings have been used to prepare micro- (∼2 μm), submicro- (∼200 nm), and nanoparticles (∼20 nm) containing rifampicin (Rif) to obtain time-controlled drug release kinetics. Different particle sizes and drug release kinetics have been obtained using different synthesis conditions and fabrication techniques including the use of an electrosprayer and an interdigital microfabricated micromixer. The antimicrobial action of the encapsulated Rif has been demonstrated against Staphylococcus aureus ATCC 25923 and compared with the effect of the equivalent dose of the free macrolide antibiotic. At low concentrations, the encapsulated antibiotic showed superior antimicrobial activity than the free drug. The stability of the developed particles has been evaluated in vitro under simulated gastric and intestinal conditions. At the concentrations tested, a reduced cytotoxicity against different human cell lines was observed after analyzing their subcytotoxic doses and the influence on their cell cycle by flow cytometry. Drug release kinetics can be tuned by adjusting particle sizes, and it would be possible to reach the minimum inhibitory concentration or the minimum bactericidal concentration at different time points depending on the medical needs., This research was funded by the Spanish Ministry of Economy and Competitiveness (grant number CTQ2017-84473-R). Financial support from the EU thanks to the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) is also acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund. V.S. acknowledges the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel β-sheet α-synuclein aggregates

  • Camino, José D.
  • Gracia, Pablo
  • Chen, S.W.
  • Sot, Jesús
  • Arada, Igor de la
  • Sebastián, Víctor
  • Arrondo, José Luis R.
  • Goñi, Félix M.
  • Dobson, Christopher M.
  • Cremades, Nunilo
13 pags., 8 figs., α-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel β-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that α-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel β-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside α-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo α-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation., This work was supported by MINECO (RYC-2012-12068, NC), MINECO/FEDER, EU (BFU2015-64119-P, NC), MICIU/FEDER, EU (PGC2018-096335-B-100, NC), MICIU/FEDER, EU (RTI2018- 099019-A-I00, VS), MCI/AEI/FEDER, UE (PGC2018-099857-BI00, FMG) and Basque Government (IT1264-19, FMG and IT1196-19, JLRA), and Fundacion Biofısica Bizkaia and the Basque Excellence Research Centre (BERC) program of the Basque Government (FMG, JLRA). We thank the Proteomics Unit of Servicios Cientifico Teecnicos del CIBA (IACS-Universidad de Zaragoza), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nondestructive production of exosomes loaded with ultrathin palladium nanosheets for targeted bio-orthogonal catalysis

  • Sebastián, Víctor
  • Sancho‐Albero, María
  • Arruebo, Manuel
  • Pérez‐López, Ana M.
  • Rubio‐Ruiz, Belén
  • Martín-Duque, Pilar
  • Unciti-Broceta, Asier
  • Ricote, J.
The use of exosomes as selective delivery vehicles of therapeutic agents, such as drugs or hyperthermia-capable nanoparticles, is being intensely investigated on account of their preferential tropism toward their parental cells. However, the methods used to introduce a therapeutic load inside exosomes often involve disruption of their membrane, which may jeopardize their targeting capabilities, attributed to their surface integrins. On the other hand, in recent years bio-orthogonal catalysis has emerged as a new tool with a myriad of potential applications in medicine. These bio-orthogonal processes, often based on Pd-catalyzed chemistry, would benefit from systems capable of delivering the catalyst to target cells. It is therefore highly attractive to combine the targeting capabilities of exosomes and the bio-orthogonal potential of Pd nanoparticles to create new therapeutic vectors. In this protocol, we provide detailed information on an efficient procedure to achieve a high load of catalytically active Pd nanosheets inside exosomes, without disrupting their membranes. The protocol involves a multistage process in which exosomes are first harvested, subjected to impregnation with a Pd salt precursor followed by a mild reduction process using gas-phase CO, which acts as both a reducing and growth-directing agent to produce the desired nanosheets. The technology is scalable, and the protocol can be conducted by any researcher having basic biology and chemistry skills in ~3 d., We gratefully acknowledge financial support from the ERC Advanced Grant CADENCE (grant no. ERC-2016-ADG-742684) and the EPSRC (Healthcare Technology Challenge award no. EP/N021134/1). M.S.-A. thanks the Spanish Government for an FPU PhD research fellowship. B.R.-R. thanks the EC (grant no. H2020-MSCA-IF-2014–658833). V.S. acknowledges the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. M.A. acknowledges the financial support of the ERC Consolidator Grant programme (grant no. ERC-2013-CoG-614715). P.M.-D. also thanks Instituto de Salud Carlos III (PI19/01007). We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) ‘Una manera de hacer Europa’, with the assistance of the European Regional Development Fund. This study is also partially funded by the Aragon Government (T57_17R p) cofounded by Feder 2014–2020 ‘Building Europe from Aragon’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A minimally-masked inactive prodrug of panobinostat that is bioorthogonally activated by gold chemistry

  • Rubio‐Ruiz, Belén
  • Pérez‐López, Ana M.
  • Sebastián, Víctor
  • Unciti-Broceta, Asier
The recent incorporation of Au chemistry in the bioorthogonal toolbox has opened up new opportunities to deliver biologically independent reactions in living environments. Herein we report that the O-propargylation of the hydroxamate group of the potent HDAC inhibitor panobinostat leads to a vast reduction of its anticancer properties (>500-fold). We also show that this novel prodrug is converted back into panobinostat in the presence of Au catalysts in vitro and in cell culture., We gratefully acknowledge financial support from EPSRC (EP/N021134/1 and EP/S010289/1). B.R.-R. thanks the EC (grant no. H2020-MSCA-IF-2014-658833). V.S. acknowledges the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chalcogenide nanoparticles and organic photosensitizers for synergetic antimicrobial photodynamic therapy

  • Garin, Carlos
  • Alejo, Teresa
  • Perez-Laguna, Vanesa
  • Prieto, Martín
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Sebastián, Víctor
  • Rezusta, Antonio
Synergistic antimicrobial effects were observed for copper sulfide (CuS) nanoparticles together with indocyanine green (ICG) in the elimination of wild type pathogenic bacteria (Staphylococcus aureus ATCC 29213 and Pseudomonas aeruginosa ATCC 27853) and also opportunistic fungal infective yeast (Candida albicans ATCC 10231). Furthermore, large antibacterial effects were observed for clinical isolates of Methicillin-resistant S. aureus (MRSA) PFGE strain-type USA300. This efficient antimicrobial action was attributed to the combined extra- and intracellular generation of reactive oxygen species upon light irradiation. Instead of the use of visible-light for the activation of common photosensitizers, both ICG and CuS nanoparticles can be activated in the near infrared (NIR)-region of the electromagnetic spectrum and therefore, superior tissue penetration would be expected in a potential elimination of pathogenic microorganisms not only on the skin but also in the soft tissue. In the different bacteria studied a 3-log reduction in the bacterial counts was achieved after only 6 min of NIR irradiation and treatment with ICG or CuS alone at concentrations of 40 and 160 µg mL−1, respectively. A maximum bactericidal effect against S. aureus and USA300 strains was obtained for the combination of both photosensitizers at the same concentration. Regarding P. aeruginosa, a 4-log reduction in the CFU was observed for the combination of CuS and ICG at various concentrations. In Candida albicans the combination of both ICG and CuS and light irradiation showed an antimicrobial dose-dependent effect with the reduction of at least 3-log in the cell counts for the combination of ICG + CuS at reduced concentrations. The observed antimicrobial effect was solely attributed to a photodynamic effect and any photothermal effect was avoided to discard any potential thermal injury in a potential clinical application. The generation of reactive oxygen species upon near infrared-light irradiation for those photosensitizers used was measured either alone or in combination. The cytocompatibility of the proposed materials at the doses used in photodynamic therapy was also demonstrated in human dermal fibroblasts and keratinocytes by cell culturing and flow cytometry studies., Financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00 is gratefully acknowledged. This research was also funded by the Spanish Ministry of Economy and Competitiveness (grant number CTQ2017-84473-R). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund. We acknowledge the LMA-INA (University of Zaragoza, Spain). G. M. acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Encapsulation of large-size plasmids in PLGA nanoparticles for gene editing: Comparison of three different synthesis methods

  • López-Royo, Tresa
  • Sebastián, Víctor
  • Moreno-Martínez, Laura
  • Usón, Laura
  • Yus, Cristina
  • Alejo, Teresa
  • Zaragoza, Pilar
  • Osta, Rosario
  • Arruebo, Manuel
  • Manzano, Raquel
This article belongs to the Special Issue Functional Polymeric Nanoparticles., The development of new gene-editing technologies has fostered the need for efficient and safe vectors capable of encapsulating large nucleic acids. In this work we evaluate the synthesis of large-size plasmid-loaded PLGA nanoparticles by double emulsion (considering batch ultrasound and microfluidics-assisted methodologies) and magnetic stirring-based nanoprecipitation synthesis methods. For this purpose, we characterized the nanoparticles and compared the results between the different synthesis processes in terms of encapsulation efficiency, morphology, particle size, polydispersity, zeta potential and structural integrity of loaded pDNA. Our results demonstrate particular sensibility of large pDNA for shear and mechanical stress degradation during double emulsion, the nanoprecipitation method being the only one that preserved plasmid integrity. However, plasmid-loaded PLGA nanoparticles synthesized by nanoprecipitation did not show cell expression in vitro, possibly due to the slow release profile observed in our experimental conditions. Strong electrostatic interactions between the large plasmid and the cationic PLGA used for this synthesis may underlie this release kinetics. Overall, none of the methods evaluated satisfied all the requirements for an efficient non-viral vector when applied to large-size plasmid encapsulation. Further optimization or alternative synthesis methods are thus in current need to adapt PLGA nanoparticles as delivery vectors for gene editing therapeutic technologies., This research was supported by the Instituto de Salud Carlos III, grant number PI17/00949; the Fondo Europeo de Desarrollo Regional (FEDER) “Una manera de hacer Europa” from the European Union; the Centro de Investigación Biomédica en Red sobre Enfermedades Neurodegenerativas (CIBERNED612-CB18/05/00037); the Horizon 2020 framework Programme Marie Curie individual fellowship scheme to R.M. (Fellowship 752349); and Consolidated Groups from Gobierno de Aragón. V.S. acknowledges the LMA-INA for offering access to their instruments and the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyect REF: RTI2018-099019-A-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008 -2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidics for the rapid and controlled preparation of organic nanotubes of bent-core based dendrimers

  • Castillo-Vallés, Martín
  • Romero, Pilar
  • Sebastián, Víctor
  • Ros, M. Blanca
Recently, bent-core molecules have emerged as excellent building blocks for the obtaining of nanostructures in solvents. Herein, we report the use of a coaxial microfluidic system as a promising tool to control the self-assembly of non-conventional bent-core amphiphiles. Moreover, a TEM study to comprehend the hierarchical self-assembly process in solution was carried out. The proposed tool provides both a cost-effective platform to save hard-to-synthesise reagents and a rapid method to screen a plethora of different parameters, i.e., THF/water ratio, residence time, concentration of the amphiphile, temperature and pH. The experiments allowed to test for the first time the suitability of microfluidics for the self-assembly of bent-core molecules, as well as the study of a range of conditions to control the assembly of different nanostructures in a rapid and controlled manner. Additionally, organic nanostructures were combined with gold nanoparticles to prepare nanocomposites with enhanced properties. Both organic and hybrid nanostructures were also obtained in the solid state. These results may inspire scientists working on supramolecular chemistry and bent-core molecules expanding the scope of microfluidic systems for the self-assembly of other low-molecular-weight compounds., The authors greatly appreciate financial support from the Spanish Government (MICINN-FEDER project MAT2015-66208-C3-1-P, PGC2018-093761-B-C31, PGC2018-097583-B-I00 and RTI2018-099019-A-I00) and the Government of Aragon (GA) (project E47_20R and T57_20R). We are also grateful to the BES-2016-078753 MINECO-FEDER (M. C.-V.) fellowship program for support. We acknowledge the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of the INMA (Uni. Zaragoza-CSIC), the LMA (Uni. Zaragoza) for TEM images, the ICTS NANBIOSIS and Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza for SEM images., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoengineering palladium plasmonic Nanosheets inside polymer nanospheres for photothermal therapy and targeted drug delivery

  • Usón, Laura
  • Yus, Cristina
  • Mendoza, Gracia
  • Leroy, Eric
  • Irusta, Silvia
  • Alejo, Teresa
  • García-Domingo, David
  • Larrea, Ane
  • Arruebo, Manuel
  • Arenal, Raúl
  • Sebastián, Víctor
The incorporation of plasmonic nanoconstructs in biodegradable polymeric nanoparticles (NPs), together with therapeutic drugs in a controlled procedure is of interest for different applications in Nanomedicine. Advanced hybrid nanomaterials can be engineered by combining the in situ formation of plasmonic palladium nanosheets (NSs) and the proper ionic nature of the encapsulated drug. This study presents a new procedure to synthesize hybrid nanostructures by a Pickering double emulsion. Anisotropic palladium (Pd) NSs with unique near-infrared (NIR)-optical properties can be assembled within a poly lactic-co-glycolic acid matrix of < 200 nm NPs, when Pd precursors are in situ reduced via a gas-phase procedure. The hybrid nanomaterials respond to external NIR light stimulus. The unprecedented precision to assemble, in a single stage, plasmonic nanoconstructs having a total loading selectivity, when encapsulated in combination with hydrophobic drugs, offers new opportunities in the new class of theragnostics, in particular when triggered drug delivery and photothermal therapies are required., The authors thank financial support from the ERC Consolidator Grant program (No. ERC-2013-CoG-614715, NANOHEDONISM). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. The (HR)TEM and STEM-EDS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. G.M. thanks the support from the Miguel Servet Program (No. MS19/00092; Instituto de Salud Carlos III). V.S. acknowledges the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto >REF: RTI2018-099019-A-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739GB-100/AEI/10.13039/501100011033), from the Government of Aragon (project DGA E13-20R), and from the European Union H2020 program “ESTEEM3” (No. 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanogels with high loading of anesthetic nanocrystals for extended duration of sciatic nerve block

  • Alejo, Teresa
  • Usón, Laura
  • Landa, Guillermo
  • Prieto, Martín
  • Yus, Cristina
  • García-Salinas, Sara
  • Miguel, Ricardo de
  • Rodríguez-Largo, Ana
  • Irusta, Silvia
  • Sebastián, Víctor
  • Mendoza, Gracia
  • Arruebo, Manuel
The development of thermoresponsive nanogels loaded with nanocrystals of the local anesthetic bupivacaine nanocrystals (BNCs) for prolonged peripheral nerve pain relief is reported here. BNCs were prepared using the antisolvent precipitation method from the hydrophobic form of bupivacaine (bupivacaine free base). The as-prepared BNCs were used stand-alone or encapsulated in temperature-responsive poly(ethylene glycol) methyl ether methacrylate (OEGMA)-based nanogels, resulting in bupivacaine NC-loaded nanogels (BNC-nanogels) of monodisperse size. The synthesis protocol has rendered high drug loadings (i.e., 93.8 ± 1.5 and 84.8 ± 1.2 wt % for the NC and BNC-nanogels, respectively) and fast drug dissolution kinetics in the resulting composite material. In vivo tests demonstrated the efficacy of the formulation along with an extended duration of sciatic nerve block in murine models of more than 8 h with a formulation containing only 2 mg of the local anesthetic thanks to the thermoresponsive character of the polymer, which, at body temperature, becomes hydrophobic and acts as a diffusion barrier for the encapsulated drug nanocrystals. The hydrophobicity of the encapsulated bupivacaine free base probably facilitates its pass through cell membranes and also binds strongly to their hydrophobic lipid bilayer, thereby protecting molecules from diffusion to extracellular media and to the bloodstream, reducing their clearance. When using BNC-nanogels, the duration of the anesthetic blockage lasted twice as long as compared to the effect of just BNCs or a conventional bupivacaine hydrochloride solution both containing equivalent amounts of the free drug. Results of the in vivo tests showed enough sensory nerve block to potentially relieve pain, but still having mobility in the limb, which enables motor function when required. The BNC-nanogels presented minimal toxicity in the in vivo study due to their sustained drug release and excellent biocompatibility. The encapsulation of nano-sized crystals of bupivacaine provides a prolonged regional anesthesia with reduced toxicity, which could be advantageous in the management of chronic pain., The authors thank financial support from the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM). V.S. acknowledges the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon─Universidad de Zaragoza”. The authors acknowledge the LMA-INA, the Histopathology Unit from CNIO (Madrid, Spain), and Cell Separation and Flow Cytometry, Cell Culture, Animal Care and Pathological Anatomy Core Units from IACS/IIS Aragon (Spain) for granting access to their instruments and expertise. The authors also acknowledge Drs. Elena Tapia, Jorge Palacio, Cristina Pastor, and Eduardo Romanos for their helpful advice and comments regarding the in vivo model. S.G.-S. and G.L. gratefully acknowledge the support from the FPI program (BES-2015-073735 and PRE2018-085769). G.M. thanks the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective point-of-care detection of pathogenic bacteria using sialic acid functionalized gold nanoparticles

  • Landa, Guillermo
  • Miranda-Calderon, Laura G.
  • Sebastián, Víctor
  • Irusta, Silvia
  • Mendoza, Gracia
  • Arruebo, Manuel
In resource-limited settings, fast and simple point-of-need tests should facilitate healthcare providers the identification of pathogens avoiding empirical suboptimal treatments with broad-spectrum antibiotics. A rapid optical whole cell bacterial biosensor has been here developed using sialic acid functionalized gold nanoparticles allowing the selective screening of Gram-positive Staphylococcus aureus ATCC 25923 and Methicillin Resistant Staphylococcus aureus (MRSA) USA300 and Gram-negative bacteria (Pseudomonas aeruginosa ATCC 15442) by selecting the appropriate dispersing media. Those bacteria were selected due to their common presence in wound bed tissue of chronic infected topical wounds. The discrimination of bacterial pathogens has been attempted in different media including water, two independent buffers, bacterial broth, human serum and human urine. The identification of Gram + bacterial pathogens was also assessed under simultaneous co-culture of S. Aureus and Pseudomonas aeruginosa. High bacterial loads were required to provide with a statistically significant optical pathogen identification in human serum whereas it was not possible to detect the presence of bacteria at clinically relevant levels in urine., This research was funded by the Spanish Ministry of Economy and Competitiveness (grant number CTQ2014-52384-R). Financial support from the EU thanks to the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM) is also acknowledged. G.L. acknowledges the support from the FPI fellowship PRE2018-085769 granted by the Spanish Ministry of Science, Innovation and Universities, while L.G.M-C. acknowledges the financial support from the Mexican Council of Science and Technology (CONACyT) through doctoral grant#710618. G.M. gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III). VS acknowledges the LMA-INA for offering access to their instruments and the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular functionalizable linear–dendritic block copolymers for the preparation of nanocarriers by microfluidics

  • Abad, Miriam
  • Martínez-Bueno, Alejandro
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Oriol, Luis
  • Sebastián, Víctor
  • Piñol, Milagros
This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in Spain (2020,2021)., Hybrid linear–dendritic block copolymers (LDBCs) having dendrons with a precise number of peripheral groups that are able to supramolecular bind functional moieties are challenging materials as versatile polymeric platforms for the preparation of functional polymeric nanocarriers. PEG2k-b-dxDAP LDBCs that are based on polyethylene glycol (PEG) as hydrophilic blocks and dendrons derived from bis-MPA having 2,6-diacylaminopyridine (DAP) units have been efficiently synthesized by the click coupling of preformed blocks, as was demonstrated by spectroscopic techniques and mass spectrometry. Self-assembly ability was first checked by nanoprecipitation. A reproducible and fast synthesis of aggregates was accomplished by microfluidics optimizing the total flow rate and phase ratio to achieve spherical micelles and/or vesicles depending on dendron generation and experimental parameters. The morphology and size of the self-assemblies were studied by TEM, Cryogenic Transmission Electron Microscopy (cryo-TEM), and Dynamic Light Scattering (DLS). The cytotoxicity of aggregates synthesized by microfluidics and the influence on apoptosis and cell cycle evaluation was studied on four cell lines. The self-assemblies are not cytotoxic at doses below 0.4 mg mL−1. Supramolecular functionalization using thymine derivatives was explored for reversibly cross-linking the hydrophobic blocks. The results open new possibilities for their use as drug nanocarriers with a dynamic cross-linking to improve nanocarrier stability but without hindering disassembly to release molecular cargoes., This work was supported by the Ministerio de Economía y Competitividad (MINECO)-FEDER, Spain, under the project grant number MAT107-84838-P (L.O., M.P., Programa Excelencia), Fondo Social Europeo and Gobierno de Aragon-FEDER (E47_17R, FEDER 2014-2020 “Construyendo Europa desde Aragón”). M. Abad (M.Ab.) acknowledges Gobierno de Aragón and Fondo Social Europeo for her PhD grant. G. Mendoza (G.M.) is also grateful for the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III). Authors acknowledge the Centro de Química y Materiales de Aragón (CEQMA) for the NMR and Thermal Analysis facilities, and the use of Electron Microscopy facilities of the Laboratorio de Microscopías Avanzadas (LMA). V. Sebastián (V.S.) acknowledges the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid thermoresponsive nanoparticles containing drug nanocrystals for NIR-triggered remote release

  • Alejo, Teresa
  • Sebastián, Víctor
  • Mendoza, Gracia
  • Arruebo, Manuel
The on-demand administration of anaesthetic drugs can be a promising alternative for chronic pain management. To further improve the efficacy of drug delivery vectors, high drug loadings combined with a spatiotemporal control on the release can not only relief the pain according to patient’s needs, but also improve the drawbacks of conventional burst release delivery systems. In this study, a hybrid nanomaterial was developed by loading bupivacaine nanocrystals (BNCs) into oligo(ethylene glycol) methyl ether methacrylate (OEGMA)-based thermoresponsive nanogels and coupling them to NIR-absorbing biodegradable copper sulphide nanoparticles (CuS NPs). Those CuS NPs were surface modified with polyelectrolytes using layer-by-layer techniques to be efficiently attached to the surface of nanogels by means of supramolecular interactions. The encapsulation of bupivacaine in the form of nanocrystals allowed to achieve CuS@BNC-nanogels having drug loadings as high as 65.5 wt%. The nanocrystals acted as long-lasting drug reservoirs, leading to an elevated localized drug content, which was useful for their application in prolonged pain relief. The CuS@BNC-nanogels exhibited favorable photothermal transducing properties upon NIR-light irradiation. The photothermal effect granted by the CuS NPs triggered the nano-crystallized drug release to be boosted by the collapse of the thermoresponsive nanogels upon heating. Remote control was achieved for on-demand release at a specific time and place, indicating their potential use as an externally activated triggerable drug-delivery system. Furthermore, cell viability tests and flow cytometry analysis were performed showing satisfactory cytocompatibility in the dose-ranging study having a subcytotoxic concentration of 0.05 mg/mL for CuS@BNC-nanogels. This remotely activated nanoplatform is a promising strategy for long-lasting controlled analgesia and a potential alternative for clinical pain management., The authors thank financial support from the ERC Consolidator Grant program (ERC-2013-CoG-614715, NANOHEDONISM). V.S. acknowledges the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. Authors acknowledge the LMA-INA, Cell Separation and Flow Cytometry, Cell Culture Units from IACS/IIS Aragon (Spain) for offering access to their instruments and expertise. G.M. thanks the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic synthesis of block copolymer micelles: Application as drug nanocarriers and as photothermal transductors when loading Pd nanosheets

  • Abad, Miriam
  • Mendoza, Gracia
  • Usón, Laura
  • Arruebo, Manuel
  • Piñol, Milagros
  • Sebastián, Víctor
  • Oriol, Luis
The synthesis of polymeric nanoparticles from a block copolymer based on poly(ethylene glycol) and a polymethacrylate containing the nucleobase analog 2,6-diacylaminopyridine is optimized by microfluidics to obtain homogeneous spherical micelles. Loading and delivery properties are studied using naproxen as a model. The incorporation of a Pd precursor in the polymer organic solution fed into the micromixer allows the preparation of Pd(II) precursor-polymer hybrid systems and the subsequent reduction with CO leads to the in situ synthesis of Pd nanosheets inside of the hydrophobic core of the polymeric micelles. This methodology is highly efficient to yield all polymeric nanoparticles loaded with Pd nanosheets as detected by electron microscopy and energy-dispersive X-ray spectroscopy. The cell viability of these Pd nanosheets-containing polymeric nanoparticles is evaluated using five cell lines, showing a high cytocompatibility at the tested concentrations without detrimental effects in cell membrane and nuclei. Furthermore, the use of these hybrid polymeric nanoparticles as photothermal transductors is evaluated using near infrared as irradiation source as well as its application in photothermal therapy using different cell lines demonstrating a high efficiency in all cell cultures., This work was supported by the “Ministerio de Economía y Competitividad, Programa Excelencia” (MINECO)-FEDER, Spain, under the project grant number MAT2017-84838-P (L.O. and M.P.) and by “Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación,” grant number: RTI2018-099019-A-I00 (V.S.), “Fondo Social Europeo and Gobierno de Aragón”-"Fondo Europeo de Desarrollo Regional", FEDER (E47_17R, FEDER 2014–2020 “Construyendo Europa desde Aragón”). M.A. acknowledges Gobierno de Aragón and Fondo Social Europeo for her Ph.D. grant. G.M. is also grateful for the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the role of components of therapeutic hydrophobic deep eutectic solvent-based nanoemulsions sustainably produced by membrane-assisted nanoemulsification for enhanced antimicrobial activity

  • Syed, Usman T.
  • Leonardo, Inês C.
  • Mendoza, Gracia
  • Gaspar, Frédéric B.
  • Gámez Herrera, Enrique
  • Huertas, Rosa M.
  • Crespo, Maria T.B.
  • Arruebo, Manuel
  • Crespo, João G.
Stringent regulations and growing industrial interests have ensued the development of sustainable processes. Membrane assisted-nanoemulsification based on microengineered membranes has been explored for the sustainable production of therapeutic hydrophobic deep eutectic solvent (DES)-based nanoemulsions for enhanced antimicrobial applications. Hydrophobic DESs were synthesised by employing therapeutic terpenes: DL-menthol and thymol. To understand the mechanism of oil droplet detachment from the membrane when producing such nanoemulsions, the effect of hydrophilicity/hydrophobicity partition of the active membrane surface on the process performance was evaluated. Using a continuous phase cross-flow velocity of 0.32 m.s−1, a dispersed phase flowrate of 0.02 ml.min−1 and 2% (w/w) Tween 80 resulted in a DES-in-water nanoemulsion of 81.2 ± 0.9 nm droplet size. Novel observations like intrinsically reduced interfacial tension of 7.5 mN.m−1 between water and hydrophobic DES, and a hydrophobic DES wetting behaviour to both hydrophilic and hydrophobic active membrane surfaces were witnessed. Compared to DL-menthol, thymol or synthesised DES, the optimised DES-in-water nanoemulsions exhibited enhanced synergetic antimicrobial effect against Escherichia coli, Staphylococcus aureus and superior potency against Cutibacterium acnes, an acne inducing bacterial strain. These nanoemulsions were also cytocompatible with human keratinocytes and dermal fibroblasts. Lastly, membrane-assisted nanoemulsification manifested controlled size and monomodally distributed nanoemulsions compared to traditional ultrasound-driven emulsification., The authors would like to acknowledge Executive Agency for Education, Audiovisual & Culture (EACEA) of the European Commission for the scholarship grant of Erasmus Mundus Doctorate in Membrane Engineering (EUDIME) program to Syed Usman Taqui. Prof. Reyes Mallada and Dr. Ruth Lahoz from Nanoscience Institute of Aragon (INA), University of Zaragoza are acknowledged for their unconditional support in fabrication and characterization of metallic membranes. This work is also supported by the Associate Laboratory for Green Chemistry - LAQV which is financed by national funds from FCT/MCTES (UIDB/50006/2020). Authors M.T.B. Crespo, F.B. Gaspar and I.C. Leonardo acknowledge the financial support from the project “MobFood – Mobilizing scientific and technological knowledge in response to the challenges of the agri-food market” (POCI-01-0247-FEDER-024524) financed by European Regional Development Fund (ERDF), through the Incentive System to Research and Technological development, within the Portugal2020 Competitiveness and Internationalization Operational Program; iNOVA4Health - UID/Multi/04462/2013, a program financially supported by Fundação para a Ciência e Tecnologia/Ministério da Educação e Ciência, through national funds and co-funded by FEDER under the PT2020 Partnership Agreement; and INTERFACE Programme, through the Innovation, Technology and Circular Economy Fund (FITEC). This research was partially funded by the Spanish Ministry of Economy and Competitiveness (grant number CTQ2014-52384-R). V. Sebastian acknowledges the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. G. Mendoza gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008 -2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward continuous production of high-quality nanomaterials using microfluidics: nanoengineering the shape, structure and chemical composition

  • Sebastián, Víctor
Over the last decade, a multitude of synthesis strategies has been reported for the production of high-quality nanoparticles. Wet-chemical methods are generally the most efficient synthesis procedures since high control of crystallinity and physicochemical properties can be achieved. However, a number of challenges remain from inadequate reaction control during the nanocrystallization process; specifically variability, selectivity, scalability and safety. These shortcomings complicate the synthesis, make it difficult to obtain a uniform product with desired properties, and present serious limitations for scaling the production of colloidal nanocrystals from academic studies to industrial applications. Continuous flow reactors based on microfluidic principles offer potential solutions and advantages. The reproducibility of reaction conditions in microfluidics and therefore product quality have proved to exceed those obtained by batch processing. Considering that in nanoparticles’ production not only is it crucial to control the particle size distribution, but also the shape and chemical composition, this review presents an overview of the current state-of-the-art in synthesis of anisotropic and faceted nanostructures by using microfluidics techniques. The review surveys the available tools that enable shape and chemical control, including secondary growth methods, active segmented flow, and photoinduced shape conversion. In addition, emphasis is placed on the available approaches developed to tune the structure and chemical composition of nanomaterials in order to produce complex heterostructures in a continuous and reproducible fashion., V. S. acknowledges the support and inspiration of Klavs F. Jensen (MIT-USA) and KFJ group in the field of microfluidics and its applications. Also acknowledged is the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00, Fundación Ramón Areces (XX Concurso nacional-Ciencias de la Vida y de la Materia) and Beca Leonardo a Investigadores y Creadores Culturales 2021 de la Fundación BBVA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Trojan pH-sensitive polymer particles produced in a continuous-flow capillary microfluidic device using water-in-oil-in-water double-emulsion droplets

  • Larrea, Ane
  • Arruebo, Manuel
  • Serra, Christophe A.
  • Sebastián, Víctor
This article belongs to the Special Issue Micro and Smart Devices and Systems., A facile and robust microfluidic method to produce nanoparticle-in-microparticle systems (Trojan systems) is reported as a delivery vector for the oral administration of active pharmaceutical ingredients. The microfluidic system is based on two coaxial capillaries that produce monodisperse water-in-oil-in-water (W/O/W) double emulsions in a highly controlled fashion with precise control over the resulting particle structure, including the core and shell dimensions. The influence of the three phase flow rates, pH and drying process on the formation and overall size is evaluated. These droplets are then used as templates for the production of pH-sensitive Trojan microparticles after solvent evaporation. The shell of Trojan microparticles is made of Eudragit®, a methacrylic acid-ethyl acrylate copolymer that would enable the Trojan microparticle payload to first pass through the stomach without being degraded and then dissolve in the intestinal fluid, releasing the inner payload. The synthesis of the pH-sensitive Trojan microparticles was also compared with a conventional batch production method. The payloads considered in this work were different in nature: (1) fluorescein, to validate the feasibility of the polymeric shell to protect the payload under gastric pH; (2) poly(D,L-lactic acid/glycolic acid)-PLGA nanoparticles loaded with the antibiotic rifampicin. These PLGA nanoparticles were produced also using a microfluidic continuous process and (3) PLGA nanoparticles loaded with Au nanoparticles to trace the PLGA formulation under different environments (gastric and intestinal), and to assess whether active pharmaceutical ingredient (API) encapsulation in PLGA is due efficiently. We further showed that Trojan microparticles released the embedded PLGA nanoparticles in contact with suitable media, as confirmed by electron microscopy. Finally, the results show the possibility of developing Trojan microparticles in a continuous manner with the ability to deliver therapeutic nanoparticles in the gastrointestinal tract., This research was funded by the Spanish Ministry of Science and Innovation (grant number REF: RTI2018-099019-A-I00. and PID2020-113987RB-I00). CIBER-BBN (initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund), Nanbiosis ICTS and ELECMI- LMA ICTS are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioorthogonal uncaging of cytotoxic paclitaxel through Pd nanosheet-hydrogel frameworks

  • Pérez‐López, Ana M.
  • Rubio‐Ruiz, Belén
  • Valero, Teresa
  • Contreras Montoya, Rafael
  • Álvarez de Cienfuegos, Luis
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Unciti-Broceta, Asier
The promising potential of bioorthogonal catalysis in biomedicine is inspiring incremental efforts to design strategies that regulate drug activity in living systems. To achieve this, it is not only essential to develop customized inactive prodrugs and biocompatible metal catalysts but also the right physical environment for them to interact and enable drug production under spatial and/or temporal control. Toward this goal, here, we report the first inactive precursor of the potent broad-spectrum anticancer drug paclitaxel (a.k.a. Taxol) that is stable in cell culture and labile to Pd catalysts. This new prodrug is effectively uncaged in cancer cell culture by Pd nanosheets captured within agarose and alginate hydrogels, providing a biodegradable catalytic framework to achieve controlled release of one of the most important chemotherapy drugs in medical practice. The compatibility of bioorthogonal catalysis and physical hydrogels opens up new opportunities to administer and modulate the mobility of transition metal catalysts in living environs., We thank EPSRC (Healthcare Technology Challenge Award, no. EP/N021134/1) and ERC (Advanced Grant CADENCE, no. ERC-2016-ADG-742684) for funding. B.R.-R. and T.V. thank the EC for an MSC Fellowship (H2020-MSCA-IF-2014-658833 and H2020-MSCA-IF-2016-749299, respectively). R.C.M. is grateful for the support of the Vicerrectorate of Research of University of Granada. R.C.-M. and L.A.C. thank Junta de Andalucı́a (Spain) for funding project P12-FQM-790. L.A.C. thanks the Ministerio de Ciencia, Innovación y Universidades, for a Salvador de Madariaga visiting professor fellowship (PRX18/00017) and the Agencia Estatal de Investigación (Ministerio de Economia y Competitividad) and the European Regional Development Fund for cofunding project FIS2017-85954-R. V.S. acknowledges the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous single-phase synthesis of [Au25(Cys)18] nanoclusters and their photobactericidal enhancement

  • Hwang, Gi Byoung
  • Wu, Gaowei
  • Shin, Juhun
  • Panariello, Luca
  • Sebastián, Víctor
  • Karu, Kersti
  • Allan, Elaine
  • Gavriilidis, Asterios
  • Parkin, Ivan P.
Thiolate-gold nanoclusters have various applications. However, most of the synthesis methods require prolonged synthesis times from several hours to days. In the present study, we report a rapid synthesis method for [Au25(Cys)18] nanoclusters and their application for photobactericidal enhancement. For [Au25(Cys)18] synthesis, we employed a tube-in-tube membrane reactor using CO as a reducing agent at elevated temperatures. This approach allows continuous generation of high-quality [Au25(Cys)18] within 3 min. Photobactericidal tests against Staphylococcus aureus showed that crystal violet-treated polymer did not have photobactericidal activity, but addition of [Au25(Cys)18] in the treated polymer demonstrated a potent photobactericidal activity at a low white light flux, resulting in >4.29 log reduction in viable bacteria numbers. Steady-state and time-resolved photoluminescence spectroscopies demonstrated that after light irradiation, photoexcited electrons in crystal violet flowed to [Au25(Cys)18] in the silicone, suggesting that redox reaction from [Au25(Cys)18] enhanced the photobactericidal activity. Stability tests revealed that leaching of crystal violet and [Au25(Cys)18] from the treated silicone was negligible and cyclic testing showed that the silicone maintained a strong photobactericidal activity after repeated use., The authors thank the EPSRC for the financial support (EP/M015157/1) through the Manufacturing Advanced Functional Materials (MAFuMa) scheme. LP received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 721290. This publication reflects only the authors’ view, exempting the Community from any liability. Project website: http://cosmic-etn.eu/. VS acknowledges the LMA-INA for offering access to their instruments and the financial support of Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microengineered membranes for sustainable production of hydrophobic deep eutectic solvent-based nanoemulsions by membrane emulsification for enhanced antimicrobial activity

  • Syed, Usman T.
  • Leonardo, Inês C.
  • Lahoz, Ruth
  • Gaspar, Frédéric B.
  • Huertas, Rosa M.
  • Crespo, Maria T.B.
  • Arruebo, Manuel
  • Crespo, João G.
  • Sebastián, Víctor
  • Brazinha, Carla
This work tackles the quest for temperature-responsive greener solvents by synthesizing a hydrophobic deep eutectic solvent (DES) comprising menthol and decanoic acid. The low solubility of hydrophobic solvents in polar media was addressed by dispersing DES as oil-in-water nanoemulsions allowing their use in biomedical applications. DES-in-water nanoemulsions produced by ultrasound and membrane emulsification techniques were systematically compared. Microengineered isoporous membranes having 9 μm pore size were fabricated by laser machining. A membrane pitch of 100 μm was optimized to produce nanoemulsions 58.7 ± 0.4 nm in size at a dispersed phase flow rate of 0.02 mL min–1 leading to a new approach termed as membrane-assisted nanoemulsification. Subsequently, the optimized DES-based nanoemulsions subjected to antimicrobial susceptibility testing assays were 32 times more active against the Gram-positive bacteria, S. aureus ATCC 6538, than against the Gram-negative bacteria, E. coli ATCC 8739. In contrast to the non-emulsified DES or its individual components, 16 times less chemicals were required to inhibit bacterial activity when tested as nanoemulsions, suggesting increased bioavailability and a synergistic effect of all components in nanoemulsions potentiating their antibacterial activity. Lastly, membrane-assisted nanoemulsification offers sustainable production of nanoemulsions with a better control over size and dispersity along with lowered energy consumption when compared to ultrasound emulsification., The authors would like to acknowledge Executive Agency for Education, Audiovisual & Culture (EACEA) of the European Commission for the scholarship grant of the Erasmus Mundus Doctorate in Membrane Engineering (EUDIME) program to U.T.S. Prof. Reyes Mallada from Nanoscience Institute of Aragon (INA), University of Zaragoza is acknowledged for her unconditional support in fabrication and characterization of metallic membranes. This work is also supported by the Associate Laboratory for Green Chemistry - LAQV, which is financed by national funds from FCT/MCTES (UIDB/50006/2020). M.T.B.C., F.B.G., and I.L. acknowledge the financial support from the project “MobFood – Mobilizing scientific and technological knowledge in response to the challenges of the agri-food market” (POCI-01-0247-FEDER-024524) financed by European Regional Development Fund (ERDF), through the Incentive System to Research and Technological development, within the Portugal2020 Competitiveness and Internationalization Operational Program; iNOVA4Health - UID/Multi/04462/2013, a program financially supported by Fundação para a Ciência e Tecnologia/Ministério da Educação e Ciência, through national funds and co-funded by FEDER under the PT2020 Partnership Agreement; and INTERFACE Programme, through the Innovation, Technology and Circular Economy Fund (FITEC). V.S. acknowledges the financial support from Ministerio de Ciencia, Innovación y Universidades, Programa Retos Investigación, Proyecto REF: RTI2018-099019-A-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008 -2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III (Spain) with assistance from the European Regional Development Fund., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microflow nanoprecipitation of positively charged gastroresistant polymer nanoparticles of Eudragit® RS100: A study of fluid dynamics and chemical parameters

  • Yus, Cristina
  • Arruebo, Manuel
  • Irusta, Silvia
  • Sebastián, Víctor
The objective of the present work was to produce gastroresistant Eudragit® RS100 nanoparticles by a reproducible synthesis approach that ensured mono-disperse nanoparticles under the size of 100 nm. Batch and micromixing nanoprecipitation approaches were selected to produce the demanded nanoparticles, identifying the critical parameters affecting the synthesis process. To shed some light on the formulation of the targeted nanoparticles, the effects of particle size and homogeneity of fluid dynamics, and physicochemical parameters such as polymer concentration, type of solvent, ratio of solvent to antisolvent, and total flow rate were studied. The physicochemical characteristics of resulting nanoparticles were studied applying dynamic light scattering (DLS) particle size analysis and electron microscopy imaging. Nanoparticles produced using a micromixer demonstrated a narrower and more homogenous distribution than the ones obtained under similar conditions in conventional batch reactors. Besides, fluid dynamics ensured that the best mixing conditions were achieved at the highest flow rate. It was concluded that nucleation and growth events must also be considered to avoid uncontrolled nanoparticle growth and evolution at the collection vial. Further, rifampicin-encapsulated nanoparticles were prepared using both approaches, demonstrating that the micromixing-assisted approach provided an excellent control of the particle size and polydispersity index. Not only the micromixing-assisted nanoprecipitation promoted a remarkable control in the nanoparticle formulation, but also it enhanced drug encapsulation efficiency and loading, as well as productivity. To the best of our knowledge, this was the very first time that drug-loaded Eudragit® RS100 nanoparticles (NPs) were produced in a continuous fashion under 100 nm (16.5 ± 4.3 nm) using microreactor technology. Furthermore, we performed a detailed analysis of the influence of various fluid dynamics and physicochemical parameters on the size and uniformity of the resulting nanoparticles. According to these findings, the proposed methodology can be a useful approach to synthesize a myriad of nanoparticles of alternative polymers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bioorthogonal Uncaging of Cytotoxic Paclitaxel through Pd Nanosheet-Hydrogel Frameworks

  • Pérez-López, A.M.
  • Rubio-Ruiz, B.
  • Valero, T.
  • Contreras-Montoya, R.
  • Álvarez de Cienfuegos, L.
  • Sebastián, Víctor
  • Santamaría, Jesús
  • Unciti-Broceta, A.
The promising potential of bioorthogonal catalysis in biomedicine is inspiring incremental efforts to design strategies that regulate drug activity in living systems. To achieve this, it is not only essential to develop customized inactive prodrugs and biocompatible metal catalysts but also the right physical environment for them to interact and enable drug production under spatial and/or temporal control. Toward this goal, here, we report the first inactive precursor of the potent broad-spectrum anticancer drug paclitaxel (a.k.a. Taxol) that is stable in cell culture and labile to Pd catalysts. This new prodrug is effectively uncaged in cancer cell culture by Pd nanosheets captured within agarose and alginate hydrogels, providing a biodegradable catalytic framework to achieve controlled release of one of the most important chemotherapy drugs in medical practice. The compatibility of bioorthogonal catalysis and physical hydrogels opens up new opportunities to administer and modulate the mobility of transition metal catalysts in living environs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel ß-sheet a-synuclein aggregates

  • Camino, J.D.
  • Gracia, P.
  • Chen, S.W.
  • Sot, J.
  • De La Arada, I.
  • Sebastián, V.
  • Arrondo, J.L.R.
  • Goñi, F.M.
  • Dobson, C.M.
  • Cremades, N.
a-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson 's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel ß-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that a-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel ß-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside a-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo a-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Supramolecular functionalizable linear–dendritic block copolymers for the preparation of nanocarriers by microfluidics

  • Abad, Miriam
  • Martínez-Bueno, Alejandro
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Oriol, Luis
  • Sebastián, Víctor
  • Piñol, Milagros
Hybrid linear–dendritic block copolymers (LDBCs) having dendrons with a precise number of peripheral groups that are able to supramolecular bind functional moieties are challenging materials as versatile polymeric platforms for the preparation of functional polymeric nanocarriers. PEG2k-b-dxDAP LDBCs that are based on polyethylene glycol (PEG) as hydrophilic blocks and dendrons derived from bis-MPA having 2, 6-diacylaminopyridine (DAP) units have been efficiently synthesized by the click coupling of preformed blocks, as was demonstrated by spectroscopic techniques and mass spectrometry. Self-assembly ability was first checked by nanoprecipitation. A re-producible and fast synthesis of aggregates was accomplished by microfluidics optimizing the total flow rate and phase ratio to achieve spherical micelles and/or vesicles depending on dendron generation and experimental parameters. The morphology and size of the self-assemblies were studied by TEM, Cryogenic Transmission Electron Microscopy (cryo-TEM), and Dynamic Light Scattering (DLS). The cytotoxicity of aggregates synthesized by microfluidics and the influence on apoptosis and cell cycle evaluation was studied on four cell lines. The self-assemblies are not cytotoxic at doses below 0.4 mg mL–1. Supramolecular functionalization using thymine derivatives was explored for reversibly cross-linking the hydrophobic blocks. The results open new possibilities for their use as drug nanocarriers with a dynamic cross-linking to improve nanocarrier stability but without hindering disassembly to release molecular cargoes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlling Particle Size and Release Kinetics in the Sustained Delivery of Oral Antibiotics Using pH-Independent Mucoadhesive Polymers

  • Yus, C.
  • Irusta, S.
  • Sebastian, V.
  • Arruebo, M.
Copolymers synthesized from acrylic acid and methacrylic acid used as gastroprotective and mucoadhesive enteric coatings have been used to prepare micro- (~2 µm), submicro- (~200 nm), and nanoparticles (~20 nm) containing rifampicin (Rif) to obtain time-controlled drug release kinetics. Different particle sizes and drug release kinetics have been obtained using different synthesis conditions and fabrication techniques including the use of an electrosprayer and an interdigital microfabricated micromixer. The antimicrobial action of the encapsulated Rif has been demonstrated against Staphylococcus aureus ATCC 25923 and compared with the effect of the equivalent dose of the free macrolide antibiotic. At low concentrations, the encapsulated antibiotic showed superior antimicrobial activity than the free drug. The stability of the developed particles has been evaluated in vitro under simulated gastric and intestinal conditions. At the concentrations tested, a reduced cytotoxicity against different human cell lines was observed after analyzing their subcytotoxic doses and the influence on their cell cycle by flow cytometry. Drug release kinetics can be tuned by adjusting particle sizes, and it would be possible to reach the minimum inhibitory concentration or the minimum bactericidal concentration at different time points depending on the medical needs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Encapsulation of Large-Size Plasmids in PLGA Nanoparticles for Gene Editing: Comparison of Three Different Synthesis Methods

  • López-Royo, Tresa
  • Sebastián, Víctor
  • Moreno Martínez, Laura
  • Uson, Laura
  • Yus, Cristina
  • Alejo, Teresa
  • Zaragoza, Pilar
  • Osta, Rosario
  • Arruebo, Manuel
  • Manzano, Raquel
The development of new gene-editing technologies has fostered the need for efficient and safe vectors capable of encapsulating large nucleic acids. In this work we evaluate the synthesis of large-size plasmid-loaded PLGA nanoparticles by double emulsion (considering batch ultrasound and microfluidics-assisted methodologies) and magnetic stirring-based nanoprecipitation synthesis methods. For this purpose, we characterized the nanoparticles and compared the results between the different synthesis processes in terms of encapsulation efficiency, morphology, particle size, polydispersity, zeta potential and structural integrity of loaded pDNA. Our results demonstrate particular sensibility of large pDNA for shear and mechanical stress degradation during double emulsion, the nanoprecipitation method being the only one that preserved plasmid integrity. However, plasmid-loaded PLGA nanoparticles synthesized by nanoprecipitation did not show cell expression in vitro, possibly due to the slow release profile observed in our experimental conditions. Strong electrostatic interactions between the large plasmid and the cationic PLGA used for this synthesis may underlie this release kinetics. Overall, none of the methods evaluated satisfied all the requirements for an efficient non-viral vector when applied to large-size plasmid encapsulation. Further optimization or alternative synthesis methods are thus in current need to adapt PLGA nanoparticles as delivery vectors for gene editing therapeutic technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid thermoresponsive nanoparticles containing drug nanocrystals for NIR-triggered remote release

  • Alejo, Teresa
  • Sebastian, Victor
  • Mendoza, Gracia
  • Arruebo, Manuel
The on-demand administration of anaesthetic drugs can be a promising alternative for chronic pain management. To further improve the efficacy of drug delivery vectors, high drug loadings combined with a spatiotemporal control on the release can not only relief the pain according to patient''s needs, but also improve the drawbacks of conventional burst release delivery systems. In this study, a hybrid nanomaterial was developed by loading bupivacaine nanocrystals (BNCs) into oligo(ethylene glycol) methyl ether methacrylate (OEGMA)-based thermoresponsive nanogels and coupling them to NIR-absorbing biodegradable copper sulphide nanoparticles (CuS NPs). Those CuS NPs were surface modified with polyelectrolytes using layer-by-layer techniques to be efficiently attached to the surface of nanogels by means of supramolecular interactions. The encapsulation of bupivacaine in the form of nanocrystals allowed to achieve CuS@BNC-nanogels having drug loadings as high as 65.5 wt%. The nanocrystals acted as longlasting drug reservoirs, leading to an elevated localized drug content, which was useful for their application in prolonged pain relief. The CuS@BNC-nanogels exhibited favorable photothermal transducing properties upon NIR-light irradiation. The photothermal effect granted by the CuS NPs triggered the nano-crystallized drug release to be boosted by the collapse of the thermoresponsive nanogels upon heating. Remote control was achieved for on-demand release at a specific time and place, indicating their potential use as an externally activated triggerable drug-delivery system. Furthermore, cell viability tests and flow cytometry analysis were performed showing satisfactory cytocompatibility in the dose-ranging study having a subcytotoxic concentration of 0.05 mg/mL for CuS@BNC-nanogels. This remotely activated nanoplatform is a promising strategy for long-lasting controlled analgesia and a potential alternative for clinical pain management. (c) 2021 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic Synthesis of Block Copolymer Micelles: Application as Drug Nanocarriers and as Photothermal Transductors When Loading Pd Nanosheets

  • Abad, Miriam
  • Mendoza, Gracia
  • Uson, Laura
  • Arruebo, Manuel
  • Piñol, Milagros
  • Sebastian, Victor
  • Oriol, Luis
The synthesis of polymeric nanoparticles from a block copolymer based on poly(ethylene glycol) and a polymethacrylate containing the nucleobase analog 2, 6-diacylaminopyridine is optimized by microfluidics to obtain homogeneous spherical micelles. Loading and delivery properties are studied using naproxen as a model. The incorporation of a Pd precursor in the polymer organic solution fed into the micromixer allows the preparation of Pd(II) precursor-polymer hybrid systems and the subsequent reduction with CO leads to the in situ synthesis of Pd nanosheets inside of the hydrophobic core of the polymeric micelles. This methodology is highly efficient to yield all polymeric nanoparticles loaded with Pd nanosheets as detected by electron microscopy and energy-dispersive X-ray spectroscopy. The cell viability of these Pd nanosheets-containing polymeric nanoparticles is evaluated using five cell lines, showing a high cytocompatibility at the tested concentrations without detrimental effects in cell membrane and nuclei. Furthermore, the use of these hybrid polymeric nanoparticles as photothermal transductors is evaluated using near infrared as irradiation source as well as its application in photothermal therapy using different cell lines demonstrating a high efficiency in all cell cultures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Trojan pH-Sensitive Polymer Particles Produced in a Continuous-Flow Capillary Microfluidic Device Using Water-in-Oil-in-Water Double-Emulsion Droplets

  • Larrea, Ane
  • Arruebo Gordo, Manuel
  • Serra, Christophe A.
  • Sebastián Cabeza, Víctor
A facile and robust microfluidic method to produce nanoparticle-in-microparticle systems (Trojan systems) is reported as a delivery vector for the oral administration of active pharmaceutical ingredients. The microfluidic system is based on two coaxial capillaries that produce monodisperse water-in-oil-in-water (W/O/W) double emulsions in a highly controlled fashion with precise control over the resulting particle structure, including the core and shell dimensions. The influence of the three phase flow rates, pH and drying process on the formation and overall size is evaluated. These droplets are then used as templates for the production of pH-sensitive Trojan microparticles after solvent evaporation. The shell of Trojan microparticles is made of Eudragit (R), a methacrylic acid-ethyl acrylate copolymer that would enable the Trojan microparticle payload to first pass through the stomach without being degraded and then dissolve in the intestinal fluid, releasing the inner payload. The synthesis of the pH-sensitive Trojan microparticles was also compared with a conventional batch production method. The payloads considered in this work were different in nature: (1) fluorescein, to validate the feasibility of the polymeric shell to protect the payload under gastric pH; (2) poly(D, L-lactic acid/glycolic acid)-PLGA nanoparticles loaded with the antibiotic rifampicin. These PLGA nanoparticles were produced also using a microfluidic continuous process and (3) PLGA nanoparticles loaded with Au nanoparticles to trace the PLGA formulation under different environments (gastric and intestinal), and to assess whether active pharmaceutical ingredient (API) encapsulation in PLGA is due efficiently. We further showed that Trojan microparticles released the embedded PLGA nanoparticles in contact with suitable media, as confirmed by electron microscopy. Finally, the results show the possibility of developing Trojan microparticles in a continuous manner with the ability to deliver therapeutic nanoparticles in the gastrointestinal tract.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chalcogenide nanoparticles and organic photosensitizers for synergetic antimicrobial photodynamic therapy

  • Garin C.
  • Alejo T.
  • Perez-Laguna V.
  • Prieto M.
  • Mendoza G.
  • Arruebo M.
  • Sebastian V.
  • Rezusta A.
Synergistic antimicrobial effects were observed for copper sulfide (CuS) nanoparticles together with indocyanine green (ICG) in the elimination of wild type pathogenic bacteria (Staphylococcus aureusATCC 29213 andPseudomonas aeruginosaATCC 27853) and also opportunistic fungal infective yeast (Candida albicansATCC 10231). Furthermore, large antibacterial effects were observed for clinical isolates of Methicillin-resistantS. aureus(MRSA) PFGE strain-type USA300. This efficient antimicrobial action was attributed to the combined extra- and intracellular generation of reactive oxygen species upon light irradiation. Instead of the use of visible-light for the activation of common photosensitizers, both ICG and CuS nanoparticles can be activated in the near infrared (NIR)-region of the electromagnetic spectrum and therefore, superior tissue penetration would be expected in a potential elimination of pathogenic microorganisms not only on the skin but also in the soft tissue. In the different bacteria studied a 3-log reduction in the bacterial counts was achieved after only 6 min of NIR irradiation and treatment with ICG or CuS alone at concentrations of 40 and 160 µg mL-1, respectively. A maximum bactericidal effect againstS. aureusand USA300 strains was obtained for the combination of both photosensitizers at the same concentration. RegardingP. aeruginosa, a 4-log reduction in the CFU was observed for the combination of CuS and ICG at various concentrations. InCandida albicansthe combination of both ICG and CuS and light irradiation showed an antimicrobial dose-dependent effect with the reduction of at least 3-log in the cell counts for the combination of ICG + CuS at reduced concentrations. The observed antimicrobial effect was solely attributed to a photodynamic effect and any photothermal effect was avoided to discard any potential thermal injury in a potential clinical application. The generation of reactive oxygen species upon near infrared-light irradiation for those photosensitizers used was measured either alone or in combination. The cytocompatibility of the proposed materials at the doses used in photodynamic therapy was also demonstrated in human dermal fibroblasts and keratinocytes by cell culturing and flow cytometry studies. © The Royal Society of Chemistry 2021.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanogels with High Loading of Anesthetic Nanocrystals for Extended Duration of Sciatic Nerve Block

  • Alejo, Teresa
  • Uson, Laura
  • Landa, Guillermo
  • Prieto, Martin
  • Yus Argón, Cristina
  • Garcia-Salinas, Sara
  • de Miguel, Ricardo
  • Rodríguez-Largo, Ana
  • Irusta, Silvia
  • Sebastian, Victor
  • Mendoza, Gracia
  • Arruebo, Manuel
The development of thermoresponsive nanogels loaded with nanocrystals of the local anesthetic bupivacaine nanocrystals (BNCs) for prolonged peripheral nerve pain relief is reported here. BNCs were prepared using the antisolvent precipitation method from the hydrophobic form of bupivacaine(bupivacaine free base). The as-prepared BNCs were used stand-alone or encapsulated in temperature-responsive poly(ethylene glycol) methyl ether methacrylate (OEGMA)-based nanogels, resulting in bupivacaine NC-loaded nanogels (BNC-nanogels) of monodisperse size. The synthesis protocol has rendered high drug loadings (i.e., 93.8 ±1.5 and 84.8 ±1.2 wt % for the NC and BNC-nanogels, respectively) and fast drug dissolution kinetics in the resulting composite material. In vivo tests demonstrated the efficacy of the formulation along with an extended duration of sciatic nerve block in murine models of more than 8 h with a formulation containing only 2 mg of the local anesthetic thanks to the thermoresponsive character of the polymer, which, at body temperature, becomes hydrophobic and acts as a diffusion barrier for the encapsulated drug nanocrystals. The hydrophobicity of the encapsulated bupivacaine free base probably facilitates its pass through cell membranes and also binds strongly to their hydrophobic lipid bilayer, thereby protecting molecules from diffusion to extracellular media and to the bloodstream, reducing their clearance. When using BNC-nanogels, the duration of the anesthetic blockage lasted twice as long as compared to the effect of just BNCs or a conventional bupivacaine hydrochloride solution both containing equivalent amounts of the free drug. Results of the in vivo tests showed enough sensory nerve block to potentially relieve pain, but still having mobility in the limb, which enables motor function when required. The BNC-nanogels presented minimal toxicity in the in vivo study due to their sustained drug release and excellent biocompatibility. The encapsulation of nano-sized crystals of bupivacaine provides a prolonged regional anesthesia with reduced toxicity, which could be advantageous in the management of chronic pain.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanoengineering palladium plasmonic nanosheets inside polymer nanospheres for photothermal therapy and targeted drug delivery

  • Uson, L.
  • Yus, C.
  • Mendoza, G.
  • Leroy, E.
  • Irusta, S.
  • Alejo, T.
  • García-Domingo, D.
  • Larrea, A.
  • Arruebo, M.
  • Arenal, R.
  • Sebastián, V.
The incorporation of plasmonic nanoconstructs in biodegradable polymeric nanoparticles (NPs), together with therapeutic drugs in a controlled procedure is of interest for different applications in Nanomedicine. Advanced hybrid nanomaterials can be engineered by combining the in situ formation of plasmonic palladium nanosheets (NSs) and the proper ionic nature of the encapsulated drug. This study presents a new procedure to synthesize hybrid nanostructures by a Pickering double emulsion. Anisotropic palladium (Pd) NSs with unique near-infrared (NIR)-optical properties can be assembled within a poly lactic-co-glycolic acid matrix of < 200 nm NPs, when Pd precursors are in situ reduced via a gas-phase procedure. The hybrid nanomaterials respond to external NIR light stimulus. The unprecedented precision to assemble, in a single stage, plasmonic nanoconstructs having a total loading selectivity, when encapsulated in combination with hydrophobic drugs, offers new opportunities in the new class of theragnostics, in particular when triggered drug delivery and photothermal therapies are required.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In Cellulo Bioorthogonal Catalysis by Encapsulated AuPd Nanoalloys: Overcoming Intracellular Deactivation

  • Rubio-Ruiz, Belén
  • Pérez-López, Ana M.
  • Uson, Laura
  • Ortega-Liebana, M. Carmen
  • Valero, Teresa
  • Arruebo, Manuel
  • Hueso, Jose L.
  • Sebastian, Victor
  • Santamaria, Jesus
  • Unciti-Broceta, Asier
Bioorthogonal metallocatalysis has opened up a xenobiotic route to perform nonenzymatic catalytic transformations in living settings. Despite their promising features, most metals are deactivated inside cells by a myriad of reactive biomolecules, including biogenic thiols, thereby limiting the catalytic functioning of these abiotic reagents. Here we report the development of cytocompatible alloyed AuPd nanoparticles with the capacity to elicit bioorthogonal depropargylations with high efficiency in biological media. We also show that the intracellular catalytic performance of these nanoalloys is significantly enhanced by protecting them following two different encapsulation methods. Encapsulation in mesoporous silica nanorods resulted in augmented catalyst reactivity, whereas the use of a biodegradable PLGA matrix increased nanoalloy delivery across the cell membrane. The functional potential of encapsulated AuPd was demonstrated by releasing the potent chemotherapy drug paclitaxel inside cancer cells. Nanoalloy encapsulation provides a novel methodology to develop nanoreactors capable of mediating new-to-life reactions in cells
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective point-of-care detection of pathogenic bacteria using sialic acid functionalized gold nanoparticles

  • Landa G.
  • Miranda-Calderon L.G.
  • Sebastian V.
  • Irusta S.
  • Mendoza G.
  • Arruebo M.
In resource-limited settings, fast and simple point-of-need tests should facilitate healthcare providers the identification of pathogens avoiding empirical suboptimal treatments with broad-spectrum antibiotics. A rapid optical whole cell bacterial biosensor has been here developed using sialic acid functionalized gold nanoparticles allowing the selective screening of Gram-positive Staphylococcus aureus ATCC 25923 and Methicillin Resistant Staphylococcus aureus (MRSA) USA300 and Gram-negative bacteria (Pseudomonas aeruginosa ATCC 15442) by selecting the appropriate dispersing media. Those bacteria were selected due to their common presence in wound bed tissue of chronic infected topical wounds. The discrimination of bacterial pathogens has been attempted in different media including water, two independent buffers, bacterial broth, human serum and human urine. The identification of Gram + bacterial pathogens was also assessed under simultaneous co-culture of S. Aureus and Pseudomonas aeruginosa. High bacterial loads were required to provide with a statistically significant optical pathogen identification in human serum whereas it was not possible to detect the presence of bacteria at clinically relevant levels in urine. © 2021 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidics for the rapid and controlled preparation of organic nanotubes of bent-core based dendrimers

  • Castillo-Vallés, M.
  • Romero, P.
  • Sebastián, V.
  • Ros, M.B.
Recently, bent-core molecules have emerged as excellent building blocks for the obtaining of nanostructures in solvents. Herein, we report the use of a coaxial microfluidic system as a promising tool to control the self-assembly of non-conventional bent-core amphiphiles. Moreover, a TEM study to comprehend the hierarchical self-assembly process in solution was carried out. The proposed tool provides both a cost-effective platform to save hard-to-synthesise reagents and a rapid method to screen a plethora of different parameters, i.e., THF/water ratio, residence time, concentration of the amphiphile, temperature and pH. The experiments allowed to test for the first time the suitability of microfluidics for the self-assembly of bent-core molecules, as well as the study of a range of conditions to control the assembly of different nanostructures in a rapid and controlled manner. Additionally, organic nanostructures were combined with gold nanoparticles to prepare nanocomposites with enhanced properties. Both organic and hybrid nanostructures were also obtained in the solid state. These results may inspire scientists working on supramolecular chemistry and bent-core molecules expanding the scope of microfluidic systems for the self-assembly of other low-molecular-weight compounds.