Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

The European Fault-Source Model 2020 (EFSM20): geologic input data for the European Seismic Hazard Model 2020

  • Basili, Roberto
  • Canora Catalán, Carolina
Artículo escrito por un elevado número de autores, solo se referencian el que aparece en primer lugar, el nombre del grupo de colaboración, si le hubiere, y los autores pertenecientes a la UAM, Earthquake hazard analyses rely on seismogenic source models. These are designed in various fashions, such as point sources or area sources, but the most effective is the three-dimensional representation of geological faults. We here refer to such models as fault sources. This study presents the European Fault-Source Model 2020 (EFSM20), which was one of the primary input datasets of the recently released European Seismic Hazard Model 2020. The EFSM20 compilation was entirely based on reusable data from existing active fault regional compilations that were first blended and harmonized and then augmented by a set of derived parameters. These additional parameters were devised to enable users to formulate earthquake rate forecasts based on a seismic-moment balancing approach. EFSM20 considers two main categories of seismogenic faults: crustal faults and subduction systems, which include the subduction interface and intraslab faults. The compiled dataset covers an area from the Mid-Atlantic Ridge to the Caucasus and from northern Africa to Iceland. It includes 1248 crustal faults spanning a total length of ∼95100 km and four subduction systems, namely the Gibraltar, Calabrian, Hellenic, and Cyprus arcs, for a total length of ∼ 2120 km. The model focuses on an area encompassing a buffer of 300 km around all European countries (except for Overseas Countries and Territories) and a maximum of 300 km depth for the subducting slabs. All the parameters required to develop a seismic source model for earthquake hazard analysis were determined for crustal faults and subduction systems. A statistical distribution of relevant seismotectonic parameters, such as faulting mechanisms, slip rates, moment rates, and prospective maximum magnitudes, is presented and discussed to address unsettled points in view of future updates and improvements. The dataset, identified by the DOI https://doi.org/10.13127/efsm20 (Basili et al., 2022), is distributed as machine-readable files using open standards (Open Geospatial Consortium), This work was initially supported by the project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA), which received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 730900.
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Shaking table tests of a full-scale flat-bottom manufactured steel silo filled with wheat: Main results on the fixed-base configuration

  • Silvestri, Stefano
  • Hernández Montes, Enrique|||0000-0001-6068-1264
H2020 Research Infrastructures, Grant/Award Number: 730900, This paper reports on a series of shaking table tests on a full-scale flat-bottom steel silo filled with soft wheat, characterized by aspect ratio of around 0.9. The specimen was a 3.64-m diameter and 5.50-m high corrugated-wall cylindrical silo. Multiple sensors were used to monitor the static and dynamic response of the filled silo system, including accelerometers and pressure cells. Numerous unidirectional dynamic tests were performed consisting of random signals, sinusoidal inputs, and both artificial and real earthquake records. The objectives of this paper are (i) to provide a general overview of the whole experimental campaign and (ii) to present selected results obtained for the fixed-base configuration. The measured data were processed to assess the static pressures, the dynamic overpressures (related to the effective mass) and the accelerations of monitored points on the silo wall, and to identify the basic dynamic properties (fundamental frequency of vibration, damping ratio, dynamic amplification factors) of the filled silo. Themain findings are discussed and compared with the predictions given by available theoreticalmodels and code provisions. It is found that the fundamental frequency slightly decreases with increasing acceleration, while it slightly increases with increasing compaction of the granular material. For close-to-resonance input, the dynamic amplification (in terms of peak values of accelerations) increases along the height of the silo wall up to values of around 1.4 at the top surface of the solid content. The dynamic overpressures appear to increase with depth (differently from the EN1998-4 expectations), and to be proportional to the acceleration., H2020 Research Infrastructures 730900
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a Digital Twin of the Earth System: Geo-Soft-CoRe, a Geoscientific Software & Code Repository

  • DeFelipe, Irene
  • Alcalde, Juan
  • Baykiev, Eldar
  • Bernal, Isabel
  • Boonma, Kittiphon
  • Carbonell, Ramón
  • Flude, Stefanie
  • Folch, Arnau
  • Fullea, J.
  • García-Castellanos, Daniel
  • Geyer, Adelina
  • Giralt, Santiago
  • Hernández, Armand
  • Jimenez-Munt, Ivone
  • Kumar, Ajay
  • Llorens, Maria-Gema
  • Martí Molist, Joan
  • Molina Fernández, Cecilia
  • Olivar-Castaño, Andrés
  • Parnell, Andrew
  • Schimmel, Martin
  • Torné, Montserrat
  • Ventosa, Sergio
Systematic Review Registration: https://digital.csic.es/handle/10261/193580, The immense advances in computer power achieved in the last decades have had a significant impact in Earth science, providing valuable research outputs that allow the simulation of complex natural processes and systems, and generating improved forecasts. The development and implementation of innovative geoscientific software is currently evolving towards a sustainable and efficient development by integrating models of different aspects of the Earth system. This will set the foundation for a future digital twin of the Earth. The codification and update of this software require great effort from research groups and therefore, it needs to be preserved for its reuse by future generations of geoscientists. Here, we report on Geo-Soft-CoRe, a Geoscientific Software & Code Repository, hosted at the archive DIGITAL.CSIC. This is an open source, multidisciplinary and multiscale collection of software and code developed to analyze different aspects of the Earth system, encompassing tools to: 1) analyze climate variability; 2) assess hazards, and 3) characterize the structure and dynamics of the solid Earth. Due to the broad range of applications of these software packages, this collection is useful not only for basic research in Earth science, but also for applied research and educational purposes, reducing the gap between the geosciences and the society. By providing each software and code with a permanent identifier (DOI), we ensure its self-sustainability and accomplish the FAIR (Findable, Accessible, Interoperable and Reusable) principles. Therefore, we aim for a more transparent science, transferring knowledge in an easier way to the geoscience community, and encouraging an integrated use of computational infrastructure. Systematic Review Registration: https://digital.csic.es/handle/10261/193580, This research has been funded by the Projects EPOS IP 676564, EPOS SP 871121, SERA 730900, GeoCAM (PGC2018-095154-B-I00, Spanish Government) and the Center of Excellence for Exascale in Solid Earth (ChEESE) under the Grant Agreement 823844. IDF was funded by a FEDER-Junta de Castilla y León Postdoctoral contract (SA0084P20). JA and M-GL are funded by the Spanish Ministry of Science and Innovation through the Juan de la Cierva fellowship (IJC 2018-036074-I and IJC 2018-036826-I, respectively), funded by MCIN/AEI /10.13039/501100011033. AH is grateful for his Ramón y Cajal contract (RYC 2020-029253-I). Additional funding was provided by the Spanish Ministry of Science and Innovation (RTI 2018-095594-B-I00, PGC 2018-095154-B-100) and the Generalitat de Catalunya (AGAUR, 2017SGR1022). AP’s work was supported by: a Science Foundation Ireland Career Development Award (17/CDA/4695); an investigator award (16/IA/4520); a Marine Research Programme funded by the Irish Government, co-financed by the European Regional Development Fund (Grant-Aid Agreement No. PBA/CC/18/01); European Union’s Horizon 2020 research and innovation programme InnoVar under grant agreement No 818144; SFI Centre for Research Training in Foundations of Data Science 18/CRT/6049, and SFI Research Centre awards I-Form 16/RC/3872 and Insight 12/RC/2289_P2. AH and SG thank the Spanish research project PaleoModes (CGL2016-75281-C2-1-R) which provided some of their financial support. JF is supported by an Atracción de Talento senior fellowship (2018-T1/AMB/11493) funded by Comunidad Autonoma de Madrid (Spain), and a project funded by the Spanish Ministry of Science and Innovation (PID2020-114854GB-C22)., Peer reviewed
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Construction of elastic spectra for high damping

  • Conde Conde, Jorge|||0000-0002-5633-1170
  • Benavent Climent, Amadeo|||0000-0002-9406-6726