Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improved serviceability and environmental performance of one-way slabs through the use of layered natural and recycled aggregate concrete

  • Tošić, Nikola|||0000-0003-0242-8804
  • Marinkovic, Snežana
  • Kurama, Yahya
The following are available online at http://www.mdpi.com/2071-1050/12/24/10278/s1: Excel file with input data for the parametric numerical study, Recycled aggregate concrete (RAC), i.e., concrete produced with recycled concrete aggregate (RCA) has been heavily investigated recently, and the structural design of RAC is entering into design codes. Nonetheless, the service load deflection behavior of RAC remains a challenge due to its larger shrinkage and creep, and lower modulus of elasticity. A novel solution to this challenge is the use of layered concrete, i.e., casting of horizontal layers of different concretes. To investigate the potential benefits and limits of layered concrete, this study contains a numerical parametric assessment of the time-dependent sustained service load deflections and environmental impacts of homogeneous and layered NAC and RAC one-way slabs. Four types of reinforced concrete slabs were considered: homogeneous slabs with 0%, 50% and 100% of coarse RCA (NAC, RAC50 and RAC100, respectively) and layered L-RAC100 slabs with the bottom and top halves consisting of RAC100 and NAC, respectively. In the deflection study, different statical systems, concrete strength classes and relative humidity conditions were investigated. The results showed that the layered L-RAC100 slabs performed as well as, or even better than, the NAC slabs due to the differential shrinkage between the layers. In terms of environmental performance, evaluated using a “cradle-to-gate” Life Cycle Assessment approach, the L-RAC100 slabs also performed as well as, or slightly better than, the NAC slabs. Therefore, layered NAC and RAC slabs can be a potentially advantageous solution from both structural and environmental perspectives., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 836270 and from the United States Department of State through the Fulbright Visiting Scholar Grant “Optimization of Stratified Recycled Concrete Structures Based on Numerical Analyses and Life Cycle Assessment.” Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the funding organizations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effects of low temperatures on flexural strength of macro-synthetic fiber reinforced concrete: experimental and numerical investigation

  • Aidarov, Stanislav|||0000-0001-5576-7215
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Reynvart, Igor
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fiber-reinforced concrete (FRC) is an attractive alternative to traditional steel bar-reinforced concrete structures, as evidenced by the constantly increasing market consumption of structural fibers for this purpose. In spite of significant research dedicated to FRC, less attention has been given to the effects of low temperatures on the mechanical properties of FRC, which can be critical for a variety of structural typologies and regions. With this in mind, an experimental program was carried out to assess the flexural behavior of macro-synthetic fiber-reinforced concrete (MSFRC) at different temperatures (from 20 °C to -30 °C) by means of three-point bending notched beam tests. The tested MSFRCs were produced by varying the content of polypropylene fibers (4 and 8 kg/m3). The results proved that the flexural strength capacity of all MSFRCs improved with decreasing temperature. Finite element analyses were then used to calibrate constitutive models following fib Model Code 2010 guidelines and to formulate empirical adjustments for taking into account the effects of low temperatures. The outcomes of this research are the basis for future experimental and numerical efforts meant to improve the design of MSFRCs subjected to low temperatures during service conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sustainability-oriented multi-criteria analysis of different continuous flight auger piles

  • Josa i Culleré, Irene|||0000-0002-1538-4567
  • Tošić, Nikola|||0000-0003-0242-8804
  • Marinkovic, Snežana
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Aguado de Cea, Antonio|||0000-0001-5542-6365
With increasing construction activity and concrete consumption globally, the economic, environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is imperative to assess the choice and construction of each structure and structural component from a sustainability-based perspective. In this study, such a multi-criteria decision-making approach using the MIVES method is applied to the choice of grouped continuous flight auger (CFA) piles. Different alternatives of CFA piles are studied: length (10 and 20 m), reinforcement (steel cage reinforcement and structural fibers), and aggregates (natural crushed aggregates and recycled aggregate concrete sourced from stationary and mobile recycling plants), based on experimentally verified mix designs. All alternatives were analyzed considering economic, environmental, and social requirements, using a decision-making tree with eight criteria and eleven indicators, with weights assigned by an expert panel. The results of the analysis showed a clear advantage in terms of all three sustainability requirements for CFA piles with steel fibers and recycled aggregate concrete, with all solutions with steel cage reinforcement having significantly lower values of the sustainability index. Such results demonstrate the need for implementing innovative solutions even in structural members such as CFA piles that are often considered in insufficient detail., This study has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 836270. I.J. was funded by Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), with the grant number 2018FI_B_00655. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the funding organizations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Systematic review on the creep of fiber-reinforced concrete

  • Tošić, Nikola|||0000-0003-0242-8804
  • Aidarov, Stanislav|||0000-0001-5576-7215
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fiber-reinforced concrete (FRC) is increasingly used in structural applications owing to its benefits in terms of toughness, durability, ductility, construction cost and time. However, research on the creep behavior of FRC has not kept pace with other areas such as short-term properties. Therefore, this study aims to present a comprehensive and critical review of literature on the creep properties and behavior of FRC with recommendations for future research. A transparent literature search and filtering methodology were used to identify studies regarding creep on the single fiber level, FRC material level, and level of structural behavior of FRC members. Both experimental and theoretical research are analyzed. The results of the review show that, at the single fiber level, pull-out creep should be considered for steel fiber-reinforced concrete, whereas fiber creep can be a governing design parameter in the case of polymeric fiber reinforced concrete subjected to permanent tensile stresses incompatible with the mechanical time-dependent performance of the fiber. On the material level of FRC, a wide variety of test parameters still hinders the formulation of comprehensive constitutive models that allow proper consideration of the creep in the design of FRC elements. Although significant research remains to be carried out, the experience gained so far confirms that both steel and polymeric fibers can be used as concrete reinforcement provided certain limitations in terms of structural applications are imposed. Finally, by providing recommendations for future research, this study aims to contribute to code development and industry uptake of structural FRC applications., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270 and from BASF. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged. A.d.l.F. has previously received research grants from BASF., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reliability-based assessment of the partial factor for shear design of fibre reinforced concrete members without shear reinforcement

  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and the same partial factor accepted for RC structures is accepted for FRC elements. This approach, however, is potentially on the unsafe side since the uncertainties of some design-determining mechanical properties of FRC (i.e., residual flexural strength) are larger than those for RC. Therefore, in this study, a comprehensive reliability-based calibration of the partial factor γc for the shear design of FRC members without shear reinforcement according to the fib Model Code 2010 model is performed. As a first step, the model error δ is assessed on 332 experimental results. Then, a parametric analysis of 700 cases is performed and a relationship between the target failure probability βR and γc is established. The results demonstrate that the current model together with the prescribed value of γc = 1.50 does not comply with the failure probabilities accepted for the different consequences of failure of FRC members over a 50-year service life. Therefore, changes to the shear resistance model are proposed in order to achieve the target failure probabilities., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

  • Tošić, Nikola|||0000-0003-0242-8804
  • Peralta Martínez, Dorca
  • Hafez, H.S.
  • Reynvart, Igor
  • Ahmad, Muneer
  • Liu, Guanzhi
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m3 of polypropylene fibres. After recycling, the obtained coarse recycled concrete aggregates (RCAs) were used in new concrete with 0 and 6 kg/m3 of polypropylene fibres, repeating for three generations always with the same quantities of fibres. Properties of RCA, the mechanical properties of recycled aggregate concrete, the recovery rate of polypropylene fibres and the content of fibres embedded within the RCA were measured. The results of the study show that RCA obtained by PPFRC recycling offers significant benefits to new concrete production. This is achieved through the recovered fibres reintroduced into the new concrete, as well as through the fibres embedded in the recycled aggregates, leading to increased residual tensile strength., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Systematic review on the creep of fiber-reinforced concrete

  • Tošić, Nikola
  • Aidarov, Stanislav
  • Fuente Antequera, Albert de la
Fiber-reinforced concrete (FRC) is increasingly used in structural applications owing to its benefits in terms of toughness, durability, ductility, construction cost and time. However, research on the creep behavior of FRC has not kept pace with other areas such as short-term properties. Therefore, this study aims to present a comprehensive and critical review of literature on the creep properties and behavior of FRC with recommendations for future research. A transparent literature search and filtering methodology were used to identify studies regarding creep on the single fiber level, FRC material level, and level of structural behavior of FRC members. Both experimental and theoretical research are analyzed. The results of the review show that, at the single fiber level, pull-out creep should be considered for steel fiber-reinforced concrete, whereas fiber creep can be a governing design parameter in the case of polymeric fiber reinforced concrete subjected to permanent tensile stresses incompatible with the mechanical time-dependent performance of the fiber. On the material level of FRC, a wide variety of test parameters still hinders the formulation of comprehensive constitutive models that allow proper consideration of the creep in the design of FRC elements. Although significant research remains to be carried out, the experience gained so far confirms that both steel and polymeric fibers can be used as concrete reinforcement provided certain limitations in terms of structural applications are imposed. Finally, by providing recommendations for future research, this study aims to contribute to code development and industry uptake of structural FRC applications., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270 and from BASF. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged. A.d.l.F. has previously received research grants from BASF., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reliability-based assessment of the partial factor for shear design of fibre reinforced concrete members without shear reinforcement

  • Bairán García, Jesús Miguel
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and the same partial factor accepted for RC structures is accepted for FRC elements. This approach, however, is potentially on the unsafe side since the uncertainties of some design-determining mechanical properties of FRC (i.e., residual flexural strength) are larger than those for RC. Therefore, in this study, a comprehensive reliability-based calibration of the partial factor γc for the shear design of FRC members without shear reinforcement according to the fib Model Code 2010 model is performed. As a first step, the model error δ is assessed on 332 experimental results. Then, a parametric analysis of 700 cases is performed and a relationship between the target failure probability βR and γc is established. The results demonstrate that the current model together with the prescribed value of γc = 1.50 does not comply with the failure probabilities accepted for the different consequences of failure of FRC members over a 50-year service life. Therefore, changes to the shear resistance model are proposed in order to achieve the target failure probabilities., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effects of low temperatures on flexural strength of macro-synthetic fiber reinforced concrete: experimental and numerical investigation

  • Aidarov, Stanislav
  • Nogales Arroyo, Alejandro
  • Reynvart, Igor
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fiber-reinforced concrete (FRC) is an attractive alternative to traditional steel bar-reinforced concrete structures, as evidenced by the constantly increasing market consumption of structural fibers for this purpose. In spite of significant research dedicated to FRC, less attention has been given to the effects of low temperatures on the mechanical properties of FRC, which can be critical for a variety of structural typologies and regions. With this in mind, an experimental program was carried out to assess the flexural behavior of macro-synthetic fiber-reinforced concrete (MSFRC) at different temperatures (from 20 °C to -30 °C) by means of three-point bending notched beam tests. The tested MSFRCs were produced by varying the content of polypropylene fibers (4 and 8 kg/m3). The results proved that the flexural strength capacity of all MSFRCs improved with decreasing temperature. Finite element analyses were then used to calibrate constitutive models following fib Model Code 2010 guidelines and to formulate empirical adjustments for taking into account the effects of low temperatures. The outcomes of this research are the basis for future experimental and numerical efforts meant to improve the design of MSFRCs subjected to low temperatures during service conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improved serviceability and environmental performance of one-way slabs through the use of layered natural and recycled aggregate concrete

  • Tošić, Nikola
  • Marinkovic, Snežana
  • Kurama, Yahya
The following are available online at http://www.mdpi.com/2071-1050/12/24/10278/s1: Excel file with input data for the parametric numerical study, Recycled aggregate concrete (RAC), i.e., concrete produced with recycled concrete aggregate (RCA) has been heavily investigated recently, and the structural design of RAC is entering into design codes. Nonetheless, the service load deflection behavior of RAC remains a challenge due to its larger shrinkage and creep, and lower modulus of elasticity. A novel solution to this challenge is the use of layered concrete, i.e., casting of horizontal layers of different concretes. To investigate the potential benefits and limits of layered concrete, this study contains a numerical parametric assessment of the time-dependent sustained service load deflections and environmental impacts of homogeneous and layered NAC and RAC one-way slabs. Four types of reinforced concrete slabs were considered: homogeneous slabs with 0%, 50% and 100% of coarse RCA (NAC, RAC50 and RAC100, respectively) and layered L-RAC100 slabs with the bottom and top halves consisting of RAC100 and NAC, respectively. In the deflection study, different statical systems, concrete strength classes and relative humidity conditions were investigated. The results showed that the layered L-RAC100 slabs performed as well as, or even better than, the NAC slabs due to the differential shrinkage between the layers. In terms of environmental performance, evaluated using a “cradle-to-gate” Life Cycle Assessment approach, the L-RAC100 slabs also performed as well as, or slightly better than, the NAC slabs. Therefore, layered NAC and RAC slabs can be a potentially advantageous solution from both structural and environmental perspectives., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 836270 and from the United States Department of State through the Fulbright Visiting Scholar Grant “Optimization of Stratified Recycled Concrete Structures Based on Numerical Analyses and Life Cycle Assessment.” Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the funding organizations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

  • Tošić, Nikola
  • Peralta Martínez, Dorca
  • Hafez, H.S.
  • Reynvart, Igor
  • Ahmad, Muneer
  • Liu, Guanzhi
  • Fuente Antequera, Albert de la
Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m3 of polypropylene fibres. After recycling, the obtained coarse recycled concrete aggregates (RCAs) were used in new concrete with 0 and 6 kg/m3 of polypropylene fibres, repeating for three generations always with the same quantities of fibres. Properties of RCA, the mechanical properties of recycled aggregate concrete, the recovery rate of polypropylene fibres and the content of fibres embedded within the RCA were measured. The results of the study show that RCA obtained by PPFRC recycling offers significant benefits to new concrete production. This is achieved through the recovered fibres reintroduced into the new concrete, as well as through the fibres embedded in the recycled aggregates, leading to increased residual tensile strength., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability-oriented multi-criteria analysis of different continuous flight auger piles

  • Josa i Culleré, Irene
  • Tošić, Nikola
  • Marinkovic, Snežana
  • Fuente Antequera, Albert de la
  • Aguado de Cea, Antonio
With increasing construction activity and concrete consumption globally, the economic, environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is imperative to assess the choice and construction of each structure and structural component from a sustainability-based perspective. In this study, such a multi-criteria decision-making approach using the MIVES method is applied to the choice of grouped continuous flight auger (CFA) piles. Different alternatives of CFA piles are studied: length (10 and 20 m), reinforcement (steel cage reinforcement and structural fibers), and aggregates (natural crushed aggregates and recycled aggregate concrete sourced from stationary and mobile recycling plants), based on experimentally verified mix designs. All alternatives were analyzed considering economic, environmental, and social requirements, using a decision-making tree with eight criteria and eleven indicators, with weights assigned by an expert panel. The results of the analysis showed a clear advantage in terms of all three sustainability requirements for CFA piles with steel fibers and recycled aggregate concrete, with all solutions with steel cage reinforcement having significantly lower values of the sustainability index. Such results demonstrate the need for implementing innovative solutions even in structural members such as CFA piles that are often considered in insufficient detail., This study has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 836270. I.J. was funded by Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), with the grant number 2018FI_B_00655. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the funding organizations., Peer Reviewed, Postprint (published version)