Pasar al contenido principal

FLUENCIA Y FATIGA EN ELEMENTOS ESTRUCTURALES DE HORMIGON REFORZADO CON FIBRAS

PID2019-108978RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 81
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad|||0000-0002-3219-2970
  • Bajic, Petar
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Turmo Coderque, José|||0000-0001-5001-2438
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 1: experimental programme and real-scale prototype

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The use of conventional reinforced concrete for building partition walls has proven several benefits in terms of acoustic performance and robustness. Horizontal reinforcement is typically governing in their design, and arranged to control cracking due to shrinkage and imposed deformations. In view of reducing material consumption and CO2eq, an alternative reinforcement concept based on the use of macro-synthetic fibres (MSFRC) is proposed in this paper and applied in practice within an actual building recently completed in Switzerland. This paper collects the research and practical experiences of the authors and aims at addressing questions that may arise during the construction and design stage of such members. To this end, a real-scale cast-in-situ MSFRC prototype wall of h/b/t = 2.8/1.2/0.15 m was cast. The objective is to shed some light on the casting procedure for wall elements and to assess the mechanical and rheological properties of the mix and fibre distribution and orientation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental characterization of comfort performance parameters and multi-criteria sustainability assessment of recycled textile-reinforced cement facade cladding

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Hosseini, Seyed Mohammad Amin|||0000-0002-5558-6817
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Haurie Ibarra, Laia|||0000-0002-0732-8928
  • Lacasta Palacio, Ana María|||0000-0002-9060-6043
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Within the building construction sector, fiber cement boards have attracted interest as facade cladding materials in the last ten years, especially those that incorporate –for reinforcing purposes– natural and/or recycled synthetic fibers (i.e, from the textile industry). So far, the design-governing parameters of facade cladding panels have been mechanical strength, durability, constructability, aesthetics, insulation capacity, and fire resistance. From the sustainability perspective, the impact of the facade on the economic and energy efficiency performance is most often the parameter that leads the decision-making process. Within this context, the quantification of the sustainability performance of the facade –accounting for economic, environmental, and social indicators– is unfrequently carried out in design and project phases, this being attributed to the lack of methodologies that allow considering and quantifying some relevant indicators representative of the facade sustainability performance. As consequence, decisions made based on solely economic and on some of the environmental indicators might lead to solutions with lower sustainability performance than that required (or expected). Recycled textile waste fabric-reinforced cement board as a facade-cladding material for building envelopes is the focus of this research. In order to characterize the fire resistance, and thermal and acoustic insulation –as relevant serviceability parameters– of this material, an experimental program was carried out. Likewise, the sustainability performance of this facade-cladding is assessed through a method based on the Integrated Value Model for Sustainability Assessment (MIVES). This multi-criteria decision making (MCDM) model relies on the value function concept and the multi-disciplinary participation of experts to identify and quantify the relevant indicators of the facade sustainability performance and the relative importance of indicators and requirements. The MIVES-based model generated for this research can be straightforwardly used for assessing the sustainability performance of facade-cladding techniques made of any material and for any type of building (and location). The application of the MIVES model led to the sustainability index of this new material for facade-cladding ranging from 0.68 to 0.71 (/1.00) for different weighting scenarios., The authors express their gratitude to the Spanish Ministry of Economy, Industry, and Competitiveness for the financial support received under the scope of the projects CREEF (PID2019-108978RB-C32) and RECYBUILDMAT (PID2019-108067RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Durability of steel-fiber-reinforced self-compacted concrete with 100% recycled mixed aggregates

  • Ortiz Lozano, José Ángel
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Mena Sebastià, Francisco|||0000-0003-2775-9917
  • Aguado de Cea, Antonio|||0000-0001-5542-6365
  • Segura Pérez, Ignacio|||0000-0001-6519-9899
This paper investigates the durability of an innovative self-compacting concrete incorporating 100% recycled mixed aggregates in the coarse fraction and reinforced with steel fibers, aiming to contribute towards sustainable construction practices. The recycling of construction and demolition waste into aggregates for concrete production represents a promising strategy to address environmental challenges associated with waste disposal, natural resource depletion, and energy consumption. Recognizing the current gap in knowledge regarding comprehensive durability assessments for fully recycled, fiber-reinforced concretes, the study specifically addresses concerns related to aggressive environmental exposures typical of structures. An extensive experimental campaign was conducted, involving water penetration under pressure, internal sulfate attack, and chloride penetration tests. The results demonstrate that this steel-fiber-reinforced self-compacting concrete exhibits promising resistance against aggressive environmental agents. The key findings confirm its potential applicability in foundational structural elements, highlighting that this sustainable alternative does not significantly compromise durability when compared to conventional concretes. Consequently, this research advances understanding of how high-content recycled aggregate concretes can achieve both structural integrity and environmental sustainability, supporting broader implementation in practical engineering applications., The authors would like to thank the Agency for Management of University and Research Grants (AGAUR), Barcelona, Spain and the company ESCOFET 1886, S.A., Barcelona, Spain, for the economic support within the Industrial Doctorate Programme of Dr. Francisco Mena. This study was also fund by the Spanish Ministry of Science and Innovation under the scope of project CREEF (PID2019-108978RB-C32). Likewise, the authors wish to thank the Structural and Materials Technology Laboratory Luis Agulló Lab Staff, belonging to UPC-Barcelona Tech, Spain. We would like to thank FCC for the opportunity of on-site experiences., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 2: experimental programme on walls cast on site

  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
In the context of an experimental programme on the use of macrosynthetic fibre reinforced concrete (MSFRC) for casting building partition walls, three walls from a residential building in Switzerland were selected for an onsite application (with lengths varying between 2.8 and 13 m). The walls had an amount of fibres equal to 4 kg/m3 and only conventional reinforcement at the construction joints with adjacent walls. In addition, specimens were cast in order to measure the strength, rheological properties and characterise the post-cracking behaviour of MSFRC. A crack monitoring protocol was conducted on the walls for crack detecting and tracking their evolution over time, with no noticeable cracks in the short walls. The cracks detected for the 13 m-long wall were measured and the results summarized in this document. This research contribution aims at showcasing the use of MSFRC as an alternative to ordinary reinforcement for building partition walls, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An enhanced multi-criteria decision-making approach oriented to sustainability analysis of building facades: a case study of Barcelona

  • Gilani, Golshid
  • Hosseini, Seyed Mohammad Amin|||0000-0002-5558-6817
  • Pons Valladares, Oriol|||0000-0003-1747-8150
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
As one of the main and largest components, facades make a determining contribution to the sustainability performance of the whole building. Thus, selecting the optimal wall system is a key challenge for designers, especially on multi-material facades. To meet the requirements (i.e., cost, energy performance, aesthetics, maintainability) determined by stakeholders (i.e., client, authorities, designers), this selection involves many variables, several of which are subjective and uncertain, leading to a challenging decision-making process. In this context, this research intended to design and calibrate a new sustainability-oriented approach for selecting multi-material facade systems, and this is the first existing model for this purpose to the authors' best knowledge. The model couples MIVES and the Knapsack algorithm to generate sets of multiple-material facades, once the boundary conditions are established, and select according to sustainability indexes. A building in Barcelona with a multi-material facade was analysed by using the proposed approach to: (1) determine the optimal combination of materials and wall systems to configure the facade, based on both local technical and legislation requirements; and (2) validate the results of the model. In this regard, the results proved that most solutions with the highest sustainability index consisted of a wall with 10 cm concrete panel, 4 cm Rockwool insulation, 7 cm interior Rockwool insulation, and 2 layers of gypsum board. This was the combination implemented for the building object in the study case. The model can be adapted to different boundary conditions, regional regulations and stakeholders’ preferences. This approach is being introduced within Barcelona Council to analyse the sustainability of existing facades for the purposes of renovation and new building projects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A textile waste fiber-reinforced cement composite: comparison between short random fiber and textile reinforcement

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Currently, millions of tons of textile waste from the garment and textile industries are generated worldwide each year. As a promising option in terms of sustainability, textile waste fibers could be used as internal reinforcement of cement-based composites by enhancing ductility and decreasing crack propagation. To this end, two extensive experimental programs were carried out, involving the use of either fractions of short random fibers at 6–10% by weight or nonwoven fabrics in 3–7 laminate layers in the textile waste-reinforcement of cement, and the mechanical and durability properties of the resulting composites were characterized. Flexural resistance in pre- and post-crack, toughness, and stiffness of the resulting composites were assessed in addition to unrestrained drying shrinkage testing. The results obtained from those programs were analyzed and compared to identify the optimal composite and potential applications. Based on the results of experimental analysis, the feasibility of using this textile waste composite as a potential construction material in nonstructural concrete structures such as facade cladding, raised floors, and pavements was confirmed. The optimal composite was proven to be the one reinforced with six layers of nonwoven fabric, with a flexural strength of 15.5 MPa and a toughness of 9.7 kJ/m2., This research was funded by the Spanish Ministry of Economy, Industry, and Competitiveness, RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Neural network. Game theory coupled approach for predicting flexural performance of fibre-reinforced concrete

  • López Carreño, Rubén-Daniel|||0000-0003-1040-5135
  • Ikumi Montserrat, Tai|||0000-0001-9547-5241
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
The addition of fibres to concrete is an effective solution for enhancing its post-cracking tensile strength (fctR). Currently, this property is characterized through high-cost and time-consuming experimental tests since no reliable analytical methods exist to predict this mechanical property. This study provides two neural networks for predicting the fctR obtained from flexural beam tests for crack mouth opening displacements of 0.50 mm (fR1) and 2.50 mm (fR3). Network architectures are obtained with an optimization process that involved training 1568 Multi-Layer Perceptron configurations under Monte Carlo cross-validation over 50 iterations, with a total of 78,400 trainings for each fR,i. The resulting models were evaluated using performance metrics including Coefficient of Determination (R2), Correlation Coefficient (CC), Mean Absolute Error (MAE), Root Mean Square Error (RMSE) and Scatter index (SI). High predictive accuracies were achieved for both fR1 (R2 = 0.87, CC = 0.93, MAE = 0.64 MPa, RMSE = 0.90 MPa, SI = 19.2%) and fR3 (R2 = 0.85, CC = 0.92, MAE = 0.73 MPa, RMSE = 0.95 MPa, SI = 19.8%). Furthermore, the analysis of their global and local interpretability through the game-theory-based SHAP explanation method confirms their consistency with established understandings of fibre-reinforced concrete (FRC) behaviour. Moreover, numerical expressions are proposed as an alternative to traditional testing methods, offering a tool to predict the flexural post-cracking tensile strength for pre-design and quality control purposes of FRC structures. These approaches are deemed essential for advancing FRC technology marking a significant advancement in addressing the design limitations and widespread application challenges associated with the material., This work was supported by the Catalan agency AGAUR through its research group support program (2021 SGR 00341) and by the Spanish Ministry of Science and Innovation under the scope of project CREEF (PID2019-108978RB-C32/AEI/10.13039/ 501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sustainability of column-supported slabs for buildings: a multi-criteria assessment

  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Josa i Culleré, Irene|||0000-0002-1538-4567
  • Aidarov, Stanislav|||0000-0001-5576-7215
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The global construction industry is experiencing significant growth, driving the demand for building floor area. However, this expansion comes with substantial environmental consequences, including high-energy consumption and greenhouse gas (GHG) emissions, together with economic and social impacts. To address these challenges, this research aims at providing designers and decisions-makers with an approach that will aid the quantification of those impacts relevant for the sustainability performance of flooring systems. A holistic sustainability assessment was performed considering economic, environmental, and social aspects using the Integrated Value Model for Sustainability Evaluations. This study focused on various flooring typologies, including reinforced concrete (RC) and fiber-RC (FRC) slabs with solid and waffle (for RC solution) configurations. The most representative criteria and indicators of sustainability for concrete column-supported slabs were identified, measured, and weighted—aggregated in a decision-making tree—in order to obtain a representative a sustainability index (SI) for each alternative. The results of the analysis evidence that the RC solid slab has a higher overall SI than the other alternatives, the FRC alternatives performing with similar SI of that quantified for the RC solid slab solution and the RC waffle slab being that with the lower sustainability performance among those flooring systems considered in this study. The results of a sensitivity analysis showed that those alternatives using FRC have potential for improving the overall sustainability performance., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Reliability of shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The scope and amount of fibre reinforced concrete (FRC) structural applications have seen significant increases. This means that safe and reliable ultimate limit state (ULS) models are necessary for FRC structural members. Among these, shear strength of FRC members without shear reinforcement is highly important due to the brittleness of shear failure. Because of this, the fib Model Code 2010 introduced two shear strength models: an empirical model based on Eurocode 2 and a physical model based on the Modified Compression Field Theory. However, a comprehensive reliability assessment of these models has been lacking. Therefore, in this study, the safety format of these models is assessed and the partial safety factors for FRC in shear, ¿c and ¿F are updated. As a first step, a large database of experimental results on FRC beams is used to determine model uncertainties. Following this, a comprehensive parametric probabilistic analysis is performed using the First Order Reliability Method to determine the adequate values of ¿c for different target reliability indices ß. The results of this study show that in order to reach typical reliability indices used in ULS design, ¿c and ¿F values need to be increased for FRC members without shear reinforcement for both models proposed by the fib Model Code 2010., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modified digital image correlation aided measurement of the transverse to longitudinal deformation ratio for polymeric macro-fibres

  • Ikumi Montserrat, Tai|||0000-0001-9547-5241
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
  • de la Cruz, Janill Marie
  • Segura Pérez, Ignacio|||0000-0001-6519-9899
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Considering the increasing interest of polymeric macro-fibres reinforced concrete, a simple and straightforward method to assess the fibre’s transverse to longitudinal deformation ratio (¿f) becomes a determining aspect in terms of fibre both characterization and fibre–matrix interaction optimization. A noncontact optical measurement procedure to assess this ratio (¿f) - for concrete reinforcement - by a modified 2D Digital Image Correlation method is presented in this paper. This ratio (¿f) has influence on the matrix-fibre interaction and, thus, on the post-cracking tensile response of the concrete composite. Details on the definition, implementation and validation of this measurement procedure are presented. Additionally, an experimental program on 20 selected lab grade and commercial fibres was carried out to analyse the consistency of the measurements and the influence of the fibre’s geometric characteristics (flat, curved, embossed or crimped) on the ¿f. The outcomes of this research and the experimental procedure proposed are meant to assist fibre producers on the design process of optimized fibres to be used in structural concrete., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Rotation and redistribution capacity of continuous fibre reinforced beams with varying reinforcement ratios

  • Nogales, Alejandro
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The addition of fibres in concrete has been proven as a competitive solution for structural purposes, either using simply fibre reinforced concrete (FRC) or combining fibres with traditional steel reinforcement to produce hybrid reinforced concrete (HRC). Numerous research has demonstrated the benefits of adding fibres in terms of ductility, post-cracking strength, crack spacing, durability, crack width reduction, enhancement against impact, etc. For structural elements subjected to bending, such as beams, it is known that the use of FRC is beneficial for controlling crack spacing, crack widths, and deflections (i.e., serviceability limit states) but there is still a lot of research to be done in terms of ultimate limit state behaviour. This is particularly true for lightly reinforced specimens in which the addition of fibres may result in a reduction of deformation capacity, a softening response after cracking and a loss of ductility with respect to those without fibres, compromising the rotational capacity and therefore the moment redistribution capacity for statically indeterminate structures. In this regard, this research contribution presents a numerical parametric study of continuous beams cast with different FRC classes (according to fib MC2010) along with different reinforcing ratios of longitudinal reinforcement (varying from 0.13% up to 1.14%). The main goal of this research contribution is to assess the ductility, bearing capacity, ultimate plastic rotation and redistribution capacity of such members. The parametric study has been implemented by means of a finite element model (FEM) previously validated using actual tests published that can be found in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced beams. The results of this study can provide a contribution towards safer structural design of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC’s Spin-Off).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Macro fibras sintéticas: una alternativa al armado convencional en tabiques de hormigón, Macrosynthetic fibers as replacement of conventional steel reinforcement for concrete of partition walls

  • Fernández Ruiz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
A pesar de que el hormigón armado (HA) ofrece ventajas interesantes cuando se usa para construir tabiques, sobre todo entérminos de acústica y robustez, su construcción puede requerir tiempos dilatados y estar asociada a un impacto ambiental elevado. Para solventarlo, en este artículo se estudia la sustitución de la armadura convencional de acero por macro fibras sintéticas (MSFs). Las MSFs son una alternativa prometedora, respaldada por la normativa europea (Anexo L, EN 1992-1-1:2023) que proporciona una solución competitiva económicamente, garantizando un correcto control de fisuración, una mayor durabilidad y una reducción de la huella de carbono. En este artículo se describe el proceso de diseño y la construcción de un prototipo en un edificio real. Para ello, se detallanlos programas experimentales de caracterización material y estructural del hormigón reforzado con macrofibras sintéticas (MSFRC). Asimismo, se abordan las consideraciones de modelización mediante modelos de elementos finitos, así como losaspectos de control de calidad y de construcción observados. Finalmente, se presenta una primera aproximación del impacto económico y ambiental (en términos de la huella de carbono) de los tabiques de MSFRC., Los autores desean agradecer la contribución y el apoyo de las distintas empresas implicadas en el proyecto, cuya cola-boración fue fundamental durante la investigación. En parti-cular, Losinger-Marazzi (Alexandre Perquin, Guillaume Cau-dron, Grégoire Bianchi), MBCC (Julien Bizzozero, Laurent Barras), Holcim (Yoan Thomas, Stéphane Cuchet) y MP-ing (Corention Clot, Benoît Beer), así como a Jonathan Moix y Marco Mongillo de HES-SO Fribourg por su contribución a las campañas experimentales. El tercer y sexto autor de este artículo desean agradecer el apoyo financiero proporciona-do por el Ministerio de Ciencia e Innovación de España en el marco del proyecto CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization of a textile waste nonwoven fabric reinforced cement composite for non-structural building components

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Large amounts of nonrenewable resources are depleted by the construction industry in addition to the generation of million tons of mineral waste and carbon dioxide gas every year. For the sake of a more sustainable consumption pattern of building materials, as well as for reducing the waste flux to landfills, the use of recycled materials and wastes should be researched and motivated. In this sense, textile waste (TW) nonwoven fabric from residues of the garments and textile industries are investigated as internal reinforcement for cement-based matrices to enhance ductility and cracking control. To this end, an extensive experimental program was carried out to characterize both the mechanical and durability properties of the composite. The results were compared with those obtained from flax nonwoven fabric, taken as a reference (FNH and FH composites). All the composites showed a remarkable improvement in terms of toughness and post-cracking stress-bearing capacity, six being the optimum number of TW reinforcing layers. Through the analysis of the results obtained, the feasibility of using TW composite as a potential construction material in non-structural applications was confirmed. The extension to structural applications of low-medium responsibility is still required further research; nonetheless, the results are promising to this respect., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effective moment of inertia and slenderness limits of reinforced concrete and fiber-reinforced concrete slabs

  • Tošić, Nikola|||0000-0003-0242-8804
  • Sanabra Loewe, Marc|||0000-0002-7920-2427
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Following the trend of updating methods that establish the minimum slenderness of concrete members based on the work by Rangan and Scanlon, this paper elaborates new formulations of the effective moment of inertia factor (a), which expresses the ratio of the equivalent moment of inertia to the gross moment of inertia. For this purpose, closed-form solutions for a in reinforced concrete (RC) and fiber-reinforced concrete (FRC) one-way members are derived. Further, a parametric study is carried out to evaluate the relationship of the neutral axis position in RC and FRC members with equal longitudinal reinforcement ratios. Additionally, a simplified equation is proposed for the neutral axis position in FRC members. Based on experimental and numerical data on deflections of FRC members, the expression for the effective moment of inertia is adjusted. Finally, a comparison between a factors for RC and FRC members is presented and implications for minimum thicknesses of members are discussed., The authors thank Professor A. Scanlon for his support in pursuing this research topic. Professor A. de la Fuente wants to express his gratitude to received under the scope of the project CREEF (PID2019-108978RB-C32), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Tošić, Nikola|||0000-0003-0242-8804
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Practical flexural design approach for one-way hybrid fiber-reinforced concrete slabs based on a parametric study on slenderness limits

  • Sanabra Loewe, Marc|||0000-0002-7920-2427
  • Garcia Carrera, David|||0000-0002-5907-2469
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fiber-reinforced concrete (FRC) is increasingly used for structural applications. Slabs are a particularly attractive use for FRC due to a potentially increased redistribution capacity, as well as the efficient cracking control that fibers provide. However, methods for reliably establishing slenderness limits of such elements are missing. Therefore, in this study, a previously developed closed-form solution for slenderness limits of hybrid FRC (HFRC) slabs (steel reinforcement bars and steel fibers) is presented and updated. Subsequently, a comprehensive parametric study on one-way solid slabs is performed, drawing clear conclusions on which parameters are the most influencing and offering a practical flexural design approach in the form of graphs and tables for determining minimum thicknesses of HFRC slabs that may be used as design aids for practitioners., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.3 - Per a 2030, augmentar la urbanització inclusiva i sostenible, així com la capacitat de planificar i gestionar de manera participativa, integrada i sostenible els assentaments humans a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.6 - Per a 2030, reduir l’impacte ambiental negatiu per capita de les ciutats, amb especial atenció a la qualitat de l’aire, així com a la gestió dels residus municipals i d’altre tipus, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupa­ment per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Predicting flexural post-cracking strength of fiber-reinforced concrete in the Barcelona test using a neural network-aided approach

  • Ikumi Montserrat, Tai|||0000-0001-9547-5241
  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • López Carreño, Rubén-Daniel|||0000-0003-1040-5135
Structural fibers represent an effective strategy for enhancing the post-cracking tensile strength (fctR) of concrete. Currently, the characterization of this property relies predominantly on experimental methods, introducing uncertainties during the design phase and impeding advancements in new fiber types or the optimization of existing ones. This paper introduces a multilayer perceptron neural network designed to predict the fctR of fiber-reinforced concrete (FRC) undergoing the Barcelona Test. The optimal architecture of the predictor is determined through the evaluation of 9216 configurations involving input dimensions and the number of hidden layers and neurons. Generalization performance is rigorously assessed using repeated random sub-sampling validation across 50 iterations. The finalized model demonstrates a high accuracy in predicting fctR for various cracking stages in FRC (R2 of 0.87, 0.86, and 0.83). A comprehensive parametric analysis is conducted to establish coherence between the model's predictions and the established understanding of FRC behavior. Furthermore, numerical expressions are presented as an alternative tool to traditional testing, offering predictions for the residual strength of the Barcelona Test. These predictions consider factors such as fiber dosage, concrete strength, specimen type, height, and fiber geometric characteristics, serving as valuable tools for pre-design and quality control purposes. Such approaches are essential for fostering advancements in FRC technology., T. Ikumi is supported by the Torres Quevedo programme PTQ2018-009877 sponsored by the Spanish Ministry of Science and Innovation. The authors also express their gratitude to the same Spanish Ministry for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32) and to the Catalan agency AGAUR trough their research groups support program (2021 SGR 00341). Finally, P. Pujadas wishes to recognise the support from Serra Hunter programme.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of accelerated aging and silica fume addition on the mechanical and microstructural properties of hybrid textile waste-flax fabric-reinforced cement composites

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Incorporating eco-friendly substances obtained from recycled resources and industrial by-products is gaining increased acceptance among building materials. In this context, a cementitious matrix containing supplementary cementitious materials (SCMs) reinforced by recycled fibers may be a promising solution from both a durability and sustainability perspective. This study presents an extensive experimental program carried out on a cement- based composite with Silica Fume (SF), reinforced with recycled textile waste (TW) nonwoven fabric. Initially, the mechanical strength (compression and flexure) of the Portland cement paste substituted with variable SF content (0%–30%) was characterized. Based on the results, laminate plates having six TW fabric layers impregnated with three different cement pastes
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A limit state design approach for hybrid reinforced concrete column-supported flat slabs

  • Aidarov, Stanislav|||0000-0001-5576-7215
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Hybrid reinforced technology (combination of steel reinforcing bars and fibers) can be considered as a competitive alternative to the already existing solutions for the construction of column-supported flat slabs. Constructed hybrid-reinforced buildings prove that hybrid solutions have sufficient bearing capacity to maintain structural integrity despite being exposed to high stress levels, thereby providing a beneficial solution in terms of toughness, ductility, and sustainability performance. However, the lack of design-oriented recommendations based on the accepted limit state format for dealing with both serviceability and ultimate limit states slows down the wider implementation of this technology. Considering the above-mentioned, this article presents a simplified design-oriented method that covers the evaluation of the structural response of hybrid reinforced concrete column-supported flat slabs in terms of flexural strength, cracking, and instantaneous deformations. Two hybrid reinforced alternatives for a given flat slab are studied by means of the proposed approach. Furthermore, a nonlinear finite element analysis is carried out in order to evaluate the effectiveness of the developed simplified method. Based on the achieved results, its suitable accuracy and precision can be pointed out. This outcome may motivate current practitioners to consider hybrid reinforced concrete solutions as a possible alternative during the design of residential and office buildings., Departament d'Innovació, Universitats i Empresa, Generalitat de Catalunya, Grant/Award Number: 2018 DI 77; Ministerio de Ciencia e Innovación, Grant/Award Number: CREEF (PID2019-108978RB-C32), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Field monitoring of mechanical parameters of deep-buried jacketed-pipes in rock: Guanjingkou water control project

  • Deng, Zhiyun
  • Liu, Xinrong
  • Zhou, Xiaohan
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Han, Yafeng
  • Xiong, Fei
  • Peng, Haoyang
To monitor the mechanical performance of a deep-buried rock-jacketed pipe within the scope of the Guanjingkou Water Control Project in Chongqing during construction, an extensive field experimental program was performed. The pipe–rock contact pressure, pipe deformation, and jacking load eccentricity were monitored. Regarding the pipe-rock contact pressure, the following conclusions can be drawn: (1) the magnitude was independent of the pipeline depth; (2) the maximum magnitudes were detected at the crown and decreased towards the invert due to the pipe buoyancy; (3) the magnitude was constant at the crown and sides for increasing jacking forces, whereas it increased or decreased at the invert with pipe-uplift or pipe-incrustation into the surrounding rock, respectively. With regard to the strain patterns measured on the pipe, the results demonstrated that magnitude of those was only significant for high jacking force magnitudes. The experimental approach followed and the results obtained were found to be useful for future projects because such results are rarely reported., This study is supported by the National Natural Science Foundation of China (Grant No. 12102230), the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071). Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

3D-printed concrete footbridges: an approach to assess the sustainability performance

  • Asensio Cuadra, Javier
  • Josa i Culleré, Irene|||0000-0002-1538-4567
  • Montserrat López, Andrea
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Digital fabrication with concrete (DFC) is fast becoming an attractive alternative for components (i.e., façades, urban furniture) and structural typologies (i.e., short-span footbridges, columns, floor systems) for which complex geometries derived from particular aesthetical criteria and/or construction time constrictions are governing parameters. Additionally, some authors claim that this process allows improving the sustainability of structures, as less material is necessary compared to traditional concrete solutions, thus reducing greenhouse gas emissions linked to material consumption. Nonetheless, the environmental implications of DFC are still under scrutiny and remain objectively unquantified. In this study, a sustainability assessment model to allow decision-makers to evaluate and compare concrete footbridge alternatives—from the sustainability perspective—including those constructed by means of 3D printed concrete (3DPC) techniques, is presented. The proposed approach is based on the MIVES method. For this purpose, the most representative criteria and indicators of sustainability identified are measured and weighted-aggregated in a decision-making tree. The sustainability index (SI) of each alternative is the outcome derived from the application of the model, and the SI was used as reference for evaluating the alternatives. The sustainability of 3D-printed footbridges is quantified and compared to other concrete-based solutions: traditional reinforced cast-in-place and precast concrete, as traditional solutions, and ultra-high performance precast concrete and textile-reinforced concrete, as innovative alternatives. The results of the analysis lead to conclude that 3D-printed footbridges have positive impacts on environmental and social indicators, but economic indicators still need to be improved to attain a competitive solution. The approach proposed herein to assess the sustainability of footbridges can be extended to other cases and stakeholders' preferences by adapting the components of the method to sensitivities and particular boundary conditions of other scenarios., The authors want to acknowledge ACCIONA, S.A. for the economic funds and information provided. This study was also financially supported by the Spanish Ministry of Sci-ence and Innovation under the scope of project CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). A. Monserrat was supported by the Ministerio de Uni-versidades (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/ 2021) of NextGenerationEU; Postdoctoral Margarita Salas Fellowship funded by Universitat Politècnica de València., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexural performance of a new hybrid basalt-polypropylene fiber-reinforced concrete oriented to concrete pipelines

  • Deng, Zhiyun
  • Liu, Xinrong
  • Liang, Ninghui
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Peng, Haoyang
The bending performance of a basalt-polypropylene fiber-reinforced concrete (HBPFRC) was characterized by testing 24,400 × 100 × 100 mm3 prismatic specimens in a four-point bending test JSCE-SF4 configuration. The type and content of both fibers were varied in order to guarantee different target levels of post-cracking flexural performance. The results evidenced that mono-micro basalt fiber reinforced concrete (BFRC) allows the increase of the flexural strength (pre-cracking stage), while macro polypropylene fiber reinforced concrete (PPFRC) can effectively improve both bearing capacity and ductility of the composite for a wide crack width range. Compared with the plain concrete specimens, flexural toughness and equivalent flexural strength of macro PPFRC and the hybrid fiber-reinforced concrete (HFRC) increased by 3.7–7.1 times and 10–42.5%, respectively. From both technical and economic points of view, the optimal mass ratio of basalt fiber (BF) to polypropylene fiber (PPF) resulted in being 1:2, with a total content of 6 kg/m3. This HFRC is seen as a suitable material to be used in sewerage pipes where cracking control (crack formation and crack width control) is of paramount importance to guarantee the durability and functionality of the pipeline as well as the ductility of the system in case of local failures., This research project was funded by the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32), the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071) and National Natural Science Foundation of China (Grant No. 41772319)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

A discussion on the reliability of prEN1992-1-1:2021 shear strength provisions for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The Eurocode 2 for the design of concrete structures (EN1992-1-1:2004) is undergoing a revision that will lead to the publication of the second generation of this code to be used across all CEN member countries. Therefore, the impact of the code will reach hundreds of millions of people. Importantly, the Eurocode 2-revision will incorporate many significant changes, amongst which is the introduction of design provisions for fibre reinforced concrete (FRC). In this regard, one of the most important aspects for ultimate limit state (ULS) design will be the consideration of the shear strength of FRC members without shear reinforcement. Such a failure mode is associated with a number of uncertainties, as well as with a potentially-brittle failure response. However, so far, the design models proposed in the Eurocode 2-revision have not been accompanied by a robust reliability-based calibration of the FRC partial factor ¿SF. Within this context, this paper presents the results of an investigation on the safety format and the partial factor ¿SF for FRC members without shear reinforcement currently provisioned in the draft for the new Eurocode 2 (prEN1992-1-1:2021). Firstly, a database of experimental results on FRC beams is used to determine the model error. On that basis, a probabilistic analysis is performed using the First Order Reliability Method (FORM) to determine adequate values of ¿SF for varying target reliability indices. The results of the study show how ¿SF values need to updated in order to reach reliability indices typically considered for ULS design. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Effect of sustained load on the flexural bearing capacity of polypropylene fibre and minimum steel-bar reinforced concrete beams

  • Tošić, Nikola|||0000-0003-0242-8804
  • Hunger, Martin
  • Vaquero Martinez, José María
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Macro-synthetic fibres are becoming increasingly attractive as concrete reinforcement in structural applications, polypropylene fibre reinforced concrete, and macro-synthetic fibre reinforced concrete (MSFRC) in general, being an example of this tendency. Nonetheless, further knowledge needs to be gathered in relation with the time-dependant properties (i.e., creep) of the MSFRCs when its use is oriented to design-for-cracking structural elements. For this purpose, an extensive experimental programme was carried out on the flexural load bearing capacity of full-scale MSFRC beams (with mini-mum conventional steel reinforcement). Namely, beams with spans of 3 m and cross-section size of 200×250 mm were produced from a C40/50 concrete with 0 (reference), 3 and 9 kg/m3 of polypropylene fibres. Four beams were cast from each concrete type. After 28 days, two beams from each concrete type were tested until failure in three-point bending configuration. Then, one beam from each concrete was placed under sustained load for one year in a four-point bending configuration, whereas another beam from each concrete was left unloaded for one year under the same environmental conditions. After one year, both remaining beams from each concrete were tested until failure in bending. The results of the tests allowed assessing the effects of the sustained load on the remaining bearing capacity of the beams and confirming that the inclusion of a minimum steel-bar reinforcement was sufficient to prevent the beams from uncontrolled deformations triggered by tertiary tensile creep. The results were accompanied by full physical-mechanical characterization of the concretes. The preliminary results presented herein allow confirming that using MSFRC in cracking-allowed structural applications -with at least minimum mechanical (as per codes) steel-bar reinforcement amount- is reliable from the structural standpoint., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from Master Build-ers Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or rec-ommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Structural performance of chloride-corroded hybrid fibre-reinforced concrete under sustained loads

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade Perdrix, Carmen
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Cracks in concrete act as preferential pathways for agents from the exterior, which may trigger detrimental corrosion processes. The addition of fibres to concrete is reported to alter cracking formation and to improve its post-cracking behaviour. This paper an experimental campaign with the objective of comparing the structural performance of two types of reinforced concrete ele-ments subjected to chloride ingress: conventionally reinforced and reinforced using a hybrid approach, where in addition to steel bars, fibres are also used. Specimens were exposed to 3% NaCl under varying cracking conditions. Non-destructive tests (corrosion potential, corrosion current and resistivity of the concrete matrix) were used to monitor corrosion. After the exposure, specimens were subjected to bending until failure in a three-point bending test. In all specimens, corrosion initiation during the first month was detected based on the value of corrosion potential below –200 mV. In the third month of exposure, one specimen showed signs of a high corrosion rate (1.48 µA/cm2), whereas others showed signs of moderate corrosion (0.13–0.78 µA/cm2). Based on visual inspection, corrosion products were observed to concentrate in cracked regions of all specimens.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Basalt-polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 1: experimental program

  • Deng, Zhiyun
  • Liu, Xinrong
  • Chen, Peng
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Zhou, Xiaohan
  • Liang, Ninghui
  • Han, Yafeng
  • Du, Libing
This is the peer reviewed version of the following article: [ Deng, Z, Liu, X, Chen, P, et al. Basalt-polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 1: Experimental program. Structural Concrete. 2022; 23: 311– 327. https://doi.org/10.1002/suco.202000759], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/suco.202000759. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., An experimental program consisting in producing and testing reinforced concrete pipes (RCPs) under the three-edge bearing tests considering different types of reinforcement was carried out. Four types of RCPs were produced, these reinforced with: (1) polypropylene macrofibers; (2) basalt microfibers; (3) combination of both (hybrid reinforcement); and (4) plain concrete. The analysis of the crack patterns and both service and ultimate mechanical responses allowed concluding that the use of fibers do not lead to an effective increase of the first cracking load; however, both types of fibers allowed a better crack width control respect to the standard RCP. In this regard, basalt microfiber reinforced concrete led to a better response caused by concentrated loads (jacketing) whilst polypropylene macrofibers increased the concrete pipe performance in terms of bearing capacity and flexural crack control. The hybrid fiber reinforced concrete was found to be the most suitable alternative for increasing the load bearing capacity and the crack width control for service loads. These incipient experimental results permit to conclude that this type of hybrid basalt-polypropylene fiber reinforced concretes are an interesting alternative to traditional steel-cage RCPs., This work is supported by the National Key Research and Development Program of China (2018YFC1504802), Natural Science Foundation Project of Chongqing, Chongqing Science and Technology Commission (cstc2018jscxmszdX0071), Postgraduate Research Innovation Project of Chongqing (CYS19005, CYS18026). In addition, Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of design constitutive model for plastic fibre reinforced concrete through inverse analysis

  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The increasing use of fibre reinforced concrete (FRC) as a structural material requires a constant development of new tools for design purposes. In this line, different codes and guidelines include constitutive models for FRC in their specifications. However, these constitutive models are usually based on the behaviour of steel fibre reinforced concrete (SFRC) and present several limitations on representing the full behaviour of macro-synthetic fibre reinforced concrete (MSFRC). With the aim of analysing the suitability of the constitutive models when applied on macro-synthetic fibres, an experimental program to determine the performance of MSFRC using different fibre contents and concrete mixes was performed. The study of the constitutive models was conducted through an inverse analysis using a two-dimensional analytical model to verify and compare the FRC constitutive equations of the MC2010 with the experimental results. The constitutive model of MC2010 was selected given that it is able to capture both the softening and hardening behaviour of FRC through a three-point constitutive equation. The results show that the original constitutive model of the MC2010 tends to overestimate the performance of PFRC. Moreover, it could be necessary to include an additional point on the post-cracking branch of the constitutive model to represent more accurately the full residual strength of PFRC. The results also show that the ultimate strain of the constitutive model should be extended to fully capture the performance of PFRC, especially for large deformations. This study suggests that it should be necessary to redefine the constitutive models through a new approach distinguishing between FRC blended with steel or macro-synthetic fibres., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Short and long term behaviour of polypropylene fibre reinforced concrete beams with minimum steel reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fibre reinforced concrete (FRC) has quickly become an attractive solution for increasing both the mechanical performance and sustainability of concrete structures. In particular, polymeric fibres are increasingly recognized as offering significant benefits for FRC structural applications, especially in areas such as durability. Nonetheless, the behaviour of such FRC remains to be fully understood, especially from the perspective of long-term effects such as shrinkage and creep. Therefore, in this study, a comprehensive experimental programme is carried out for short- and long-term characterization of polypropylene FRC (PPFRC). The experimental program consisted of producing concretes C40/50 with 0, 3 and 9 kg/m3 of polypropylene fibres. Besides specimens for testing mechanical properties, shrinkage and creep in compression and under bending were tested. Finally, full-scale 3–m span beams with minimum steel reinforcement (0.18%) were tested until failure and under sustained loads. The results are analysed and the contribution of polypropylene fibres to reducing deflections and crack widths is assessed, with no evidence of local flexural failures due to tertiary creep phenomena. The results of this study can provide a contribution towards a fuller understanding of PPFRC structural behaviour and its future incorporation into design codes., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from MBCC Group. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Rotation and moment redistribution capacity of fiber-reinforced concrete beams: parametric analysis and code compliance

  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fiber-reinforced concrete (FRC) has been proved to be a competitive solution for structural purposes. Extensive research has highlighted the benefits of adding fibers on the post-cracking strength, reduced crack spacing and crack width, and improved durability, among others. However, these aspects are related to serviceability limit states, and significant work remains to be done in terms of ultimate limit state behavior of FRC members. As recent publications have emphasized, reinforced concrete beams with low reinforcement ratios may result in a reduction of deformation capacity and, hence, to a loss of ductility. To further investigate this topic, this paper presents the results of a numerical parametric study of simply and continuous supported hybrid-reinforced concrete (HRC) beams made with different amounts of fibers and reinforcement ratios. The deformation, rotational, and moment redistribution capacity of those were assessed by means of a finite-element model previously calibrated using experimental results available in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced (hybrid) members. Finally, the paper contains practical recommendations in terms of minimum reinforcement ratios that guarantee adequate rotation and redistribution capacity of HRC members. As such, the results of this study can provide a contribution toward more reliable structural designs of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC's Spin-Off)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mechanical and durability characterization of a new textile waste micro-fiber reinforced cement composite for building applications

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fiber reinforced mortars (FRM) are growingly used in several fields of building technology (e.g., façade panels, roofing, raised floors and masonry structures) as building elements. One of the promising type of fiber for these composite materials can be textile waste originated from cloth wastes. The use of this sort of recycled materials and wastes as cement reinforcement within the building sector can play a relevant role in sustainability, both the environmental, economic and social perspectives. In this paper, the design mechanical properties (flexural and compressive strengths at 7, 28 and 56 days as well as toughness and stiffness) together with durability properties of cement pastes reinforced with short Textile Waste Fiber (TWF) in contents ranging from 6 to 10 % by weight fraction cement was investigated. The results were compared with those obtained from Kraft Pulp pine Fiber (KPF), taken as reference. The main conclusion is the feasibility of using this type of fiber as potential reinforcement in construction materials with the optimum dosage of 8%. Although the flexural resistance and toughness of the TWF composite are lower than KPF control by almost 9%, the compressive strength and stiffness together with durability properties have proven to be enhanced respect to the reference composite., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reliability-based assessment of the partial factor for shear design of fibre reinforced concrete members without shear reinforcement

  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and the same partial factor accepted for RC structures is accepted for FRC elements. This approach, however, is potentially on the unsafe side since the uncertainties of some design-determining mechanical properties of FRC (i.e., residual flexural strength) are larger than those for RC. Therefore, in this study, a comprehensive reliability-based calibration of the partial factor γc for the shear design of FRC members without shear reinforcement according to the fib Model Code 2010 model is performed. As a first step, the model error δ is assessed on 332 experimental results. Then, a parametric analysis of 700 cases is performed and a relationship between the target failure probability βR and γc is established. The results demonstrate that the current model together with the prescribed value of γc = 1.50 does not comply with the failure probabilities accepted for the different consequences of failure of FRC members over a 50-year service life. Therefore, changes to the shear resistance model are proposed in order to achieve the target failure probabilities., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis and application of friction calculation model for long-distance rock pipe jacking engineering

  • Deng, Zhiyun
  • Liang, Ninghui
  • Liu, Xinrong
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lin, Peng
  • Peng, Haoyang
For long-distance rock pipe jacking, the coupled actions of mud float and sediment generate pipe-rock interactions, which are challenging from the analysis point of view and the general methods available for calculating the friction resistance of pipe-soil can lead to unrepresentative results. These friction forces must be quantified properly, as the magnitude of those determines the technical and economical construction requirements. In this regard, a novel approach that combines experimental and numerical stages is proposed in this research paper for dealing with the assessment of these friction forces. The results derived from the proposed approach were compared and validated with others obtained from a practical case, with satisfactory outcomes. The approach proposed herein is found to be a valuable guide for assessing the magnitude of the frictional forces that occur during the pipe jacketing and for identifying the parameters that govern the magnitude of these forces. Eventually, design and construction optimization and productivity-oriented measures can be derived from the application of the method., This study is supported by the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071). Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

  • Tošić, Nikola|||0000-0003-0242-8804
  • Peralta Martínez, Dorca
  • Hafez, H.S.
  • Reynvart, Igor
  • Ahmad, Muneer
  • Liu, Guanzhi
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m3 of polypropylene fibres. After recycling, the obtained coarse recycled concrete aggregates (RCAs) were used in new concrete with 0 and 6 kg/m3 of polypropylene fibres, repeating for three generations always with the same quantities of fibres. Properties of RCA, the mechanical properties of recycled aggregate concrete, the recovery rate of polypropylene fibres and the content of fibres embedded within the RCA were measured. The results of the study show that RCA obtained by PPFRC recycling offers significant benefits to new concrete production. This is achieved through the recovered fibres reintroduced into the new concrete, as well as through the fibres embedded in the recycled aggregates, leading to increased residual tensile strength., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chloride-induced corrosion effects on the structural performance of concrete with rebar and fibres: a review

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade, Carmen
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Chloride-induced corrosion is a major contributor in the degradation of standardised steel-based products (e.g., rebars and fibres) commonly used for reinforcing concrete structures. Since cracked reinforced concrete elements are determined to be more susceptible to corrosion on the one hand, and fibres are effective in arresting crack growth and improving the post-cracking mechanical behaviour on the other hand, the use of fibres emerges as a promising strategy to enhance durability. This review is focused on the degradation of the load-bearing capacity, caused by chloride corrosion, in concrete elements reinforced with fibres and conventional rebar. Based on the recorded values of ultimate loads and the corresponding deflections in the reviewed studies, a lower decrease in the load-bearing capacity and less severe degradation of ductility were observed in elements where fibres (either steel or macro-synthetic) were used in combination with rebar compared with elements where only rebar was used. Furthermore, the recorded values of corrosion potential (Ecorr), corrosion current density (icorr) and gravimetric measurements indicated lower corrosion damage, delayed corrosion initiation and a prolonged propagation phase of corrosion. However, due to many differences in the methodology among the reviewed studies, the optimal fibre type or quantity cannot be identified unless more studies are performed., This research was supported by the Master Builders Solutions GmbH, Germany, the Ministry of Science and Investigation (Ministerio de Ciencia, Innovación y Universidades) the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain. Project reference: PID2019-108978RB-C32; grant reference: PRE2020-095457. Support was provided by project Hormigones Reforzados con Macrofibras Sintéticas para Aplicaciones Estructurales en condiciones de altas temperaturas (HEAT), project reference: PID2023-149321OB-C32., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: performance-based equations

  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Picazo, Alvaro
  • De Marcos Garcia, Alberto
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Enfedaque, Alejandro
  • Gálvez, Jaime C.
  • Aguado de Cea, Antonio|||0000-0001-5542-6365
The postcracking capacity of fiber reinforced concrete (FRC) mainly depends on the content, material, and geometry of the fibers considered. Even though the general influence of these factors on FRC behavior has been extensively addressed, the uncertainty of the FRC performance prediction along with the variability of the results still poses a challenging issue that needs to be solved to encourage the use of FRC for design and construction purposes. In this line, a database including the results of the flexural residual strength obtained from different experimental programs combined with the results of previous studies has been gathered and analyzed herein to obtain general correlations and trends providing additional information about the influence of the fibers in FRC behavior, these meant to serve for initial design stages (e.g., make decisions on the type and amount of fibers based on technical and economical requirements). The results are analyzed distinguishing between the fiber material, the fiber shape, the aspect ratio and tensile strength. The results presented herein may provide valuable information on the initial prediction of the residual strength of FRC to fully take advantage of the mechanical properties of the material., The authors from UPC wish to express their acknowledgment to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects BIA2016-78742-C2-1-R and PID2019-108978RB-C32., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sustainability-oriented model to decide on concrete pipeline reinforcement

  • Josa i Culleré, Irene|||0000-0002-1538-4567
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Casanovas Rubio, Maria del Mar|||0000-0001-5265-9606
  • Armengou Orús, Jaume
  • Aguado de Cea, Antonio|||0000-0001-5542-6365
The design of sustainable sewerage infrastructure is fundamental for achieving long-term sustainability goals. Piping systems are essential components in the water supply chain and in waste disposal systems worldwide. Among possible designs for concrete pipes, steel cages consisting of curved rebars have been predominantly used as reinforcement. However, structural fibres have emerged as an attractive technical and economical alternative for substituting steel cages. Due to increasing urbanisation, thousands of kilometres of pipes will be constructed in the near future. At present, decisions regarding reinforcement of concrete pipes are primarily cost-driven. To consider other aspects, it is fundamental to identify and quantify potential sustainability issues properly. Hence, this paper focuses on the sustainability analysis of reinforced concrete pipes using a multi-criteria decision-making method. A model based on criteria, indicators, weights and value functions is developed and calibrated by assessing various concrete reinforcement strategies (steel bars or steel/synthetic fibres). The main contributions of the article are the proposal and application of a model for the case of concrete pipes which can be adapted for other case studies; determining how different typologies of pipes contribute to the overall sustainability of infrastructure systems; and the use and application of a robust and interesting multi-criteria decision-making methodology. The results show that fibre reinforced concrete pipes are promising alternatives in social, economic and environmental terms. Both the model and results are expected to be useful to stakeholders in decision-making processes., The research received financial support from the Ministry of Economy, Industry and Competitiveness of Spain under the scope of the projects PID2019-108978RB-C32. Besides, Irene Josa was supported by the Catalan Government through a grant from Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), with reference number 2018 FI-B 00655. Maria del Mar Casanovas-Rubio is a Serra Húnter Fellow., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Macrosynthetic fibers as replacement of conventional steel reinforcement for concrete of partition walls

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bourqui, Didier
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Conventional reinforced concrete for building partition walls has proven numerous advantages (in terms for instance of acoustic performance and robustness) with respect to other existing alternatives. However, its use leads to high material consumption and environmental footprint together with time-consuming processes for placing steel reinforcement. To reduce time-consuming processes and carbon footprint, the replacement of ordinary steel reinforcement by structural macrofibers is envisioned as a suitable solution due to: (1) the acceptance of fiber reinforced concrete (FRC) for structural applications in various guidelines (as Annex L of FprEN 1992-1-1:2023, draft for future Eurocode 2) and (2) the fact that the amounts of fibers necessary to reach the required mechanical performance of the FRC for crack control are expected to be economically competitive. Additionally, within the spectra of types of macrofibers capable of efficiently reinforce concrete, macrosynthetic fibers (MSFs) were considered in this research due to their benefits in terms of durability performance and reduced environmental impact (potential to use cements with lower clinker content and reduced thickness of elements). Aiming at confirming both the constructability, casting procedure and structural performance of macrosynthetic fiber reinforced concrete (MSFRC) partition walls, these walls were constructed in a real building in Switzerland. In this article, the design process is presented as well as the associated MSFRC material and structural experimental programmes, conducted both in laboratory and on-site. In addition, several FEM-modeling considerations as well as quality control and construction aspects observed during the implementation process are raised. Finally, for reference purposes, a first approach to the economic and environmental impact (CO2eq-based) of such MSFRC walls is presented., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Durability of steel-fiber-reinforced self-compacted concrete with 100% recycled mixed aggregates

  • Ortiz Lozano, José Ángel
  • Fuente Antequera, Albert de la
  • Mena Sebastià, Francisco
  • Aguado de Cea, Antonio
  • Segura Pérez, Ignacio
This paper investigates the durability of an innovative self-compacting concrete incorporating 100% recycled mixed aggregates in the coarse fraction and reinforced with steel fibers, aiming to contribute towards sustainable construction practices. The recycling of construction and demolition waste into aggregates for concrete production represents a promising strategy to address environmental challenges associated with waste disposal, natural resource depletion, and energy consumption. Recognizing the current gap in knowledge regarding comprehensive durability assessments for fully recycled, fiber-reinforced concretes, the study specifically addresses concerns related to aggressive environmental exposures typical of structures. An extensive experimental campaign was conducted, involving water penetration under pressure, internal sulfate attack, and chloride penetration tests. The results demonstrate that this steel-fiber-reinforced self-compacting concrete exhibits promising resistance against aggressive environmental agents. The key findings confirm its potential applicability in foundational structural elements, highlighting that this sustainable alternative does not significantly compromise durability when compared to conventional concretes. Consequently, this research advances understanding of how high-content recycled aggregate concretes can achieve both structural integrity and environmental sustainability, supporting broader implementation in practical engineering applications., The authors would like to thank the Agency for Management of University and Research Grants (AGAUR), Barcelona, Spain and the company ESCOFET 1886, S.A., Barcelona, Spain, for the economic support within the Industrial Doctorate Programme of Dr. Francisco Mena. This study was also fund by the Spanish Ministry of Science and Innovation under the scope of project CREEF (PID2019-108978RB-C32). Likewise, the authors wish to thank the Structural and Materials Technology Laboratory Luis Agulló Lab Staff, belonging to UPC-Barcelona Tech, Spain. We would like to thank FCC for the opportunity of on-site experiences., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Practical flexural design approach for one-way hybrid fiber-reinforced concrete slabs based on a parametric study on slenderness limits

  • Sanabra Loewe, Marc
  • Garcia Carrera, David
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fiber-reinforced concrete (FRC) is increasingly used for structural applications. Slabs are a particularly attractive use for FRC due to a potentially increased redistribution capacity, as well as the efficient cracking control that fibers provide. However, methods for reliably establishing slenderness limits of such elements are missing. Therefore, in this study, a previously developed closed-form solution for slenderness limits of hybrid FRC (HFRC) slabs (steel reinforcement bars and steel fibers) is presented and updated. Subsequently, a comprehensive parametric study on one-way solid slabs is performed, drawing clear conclusions on which parameters are the most influencing and offering a practical flexural design approach in the form of graphs and tables for determining minimum thicknesses of HFRC slabs that may be used as design aids for practitioners., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.1 - Per a 2030, assegurar l’accés de totes les persones a habitatges i a serveis bàsics adequats, segurs i assequibles, i millorar els barris marginal, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.3 - Per a 2030, augmentar la urbanització inclusiva i sostenible, així com la capacitat de planificar i gestionar de manera participativa, integrada i sostenible els assentaments humans a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.6 - Per a 2030, reduir l’impacte ambiental negatiu per capita de les ciutats, amb especial atenció a la qualitat de l’aire, així com a la gestió dels residus municipals i d’altre tipus, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables::12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupa­ment per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Tošić, Nikola
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reliability-based assessment of the Eurocode 2-revision and fib Model Code 2020 shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola
  • Bairán García, Jesús Miguel
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la
Structural design of fibre reinforced concrete (FRC) was first introduced on an international level in the fib Model Code 2010. Since then, and facilitated by this and many other advances in research and practice, its market uptake and practical applications have increased substantially. This has been recognized by policy makers and thus, provisions for FRC structural design are also being introduced into the Eurocode 2-revision (prEN1992-1-1:2021) as well as the new fib Model Code 2020. However, such changes also carry a significant responsibility of a comprehensive reliability assessment of the proposed design models. One of the most important aspects of ultimate limit state (ULS) design of FRC is the shear strength of members without shear reinforcement, mostly due to the associated uncertainty and potentially brittle failure modes. Within this frame, this paper presents a reliability-based assessment and calibration of the partial factor for FRC. To do this, the safety format of the Eurocode 2-revision and fib Model Code 2020 models for the shear strength of FRC members without shear reinforcement are assessed and the resulting partial safety factors for FRC are determined. First, a database of experimental results on FRC beams is used to determine model errors. On that basis, a probabilistic analysis is performed using the First Order Reliability Method to determine adequate values of the partial factor for varying target reliability indexes. Finally, a discussion is presented on how the proposed models can ensure typical reliability indexes adopted for ULS design., This study has received funding from the European Union’s Horizon 2020 research and innovation pro-gramme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Basalt-polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 1: experimental program

  • Deng, Zhiyun
  • Liu, Xinrong
  • Chen, Peng
  • Fuente Antequera, Albert de la
  • Zhou, Xiaohan
  • Liang, Ninghui
  • Han, Yafeng
  • Du, Libing
This is the peer reviewed version of the following article: [ Deng, Z, Liu, X, Chen, P, et al. Basalt-polypropylene fiber reinforced concrete for durable and sustainable pipe production. Part 1: Experimental program. Structural Concrete. 2022; 23: 311– 327. https://doi.org/10.1002/suco.202000759], which has been published in final form at https://onlinelibrary.wiley.com/doi/abs/10.1002/suco.202000759. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., An experimental program consisting in producing and testing reinforced concrete pipes (RCPs) under the three-edge bearing tests considering different types of reinforcement was carried out. Four types of RCPs were produced, these reinforced with: (1) polypropylene macrofibers; (2) basalt microfibers; (3) combination of both (hybrid reinforcement); and (4) plain concrete. The analysis of the crack patterns and both service and ultimate mechanical responses allowed concluding that the use of fibers do not lead to an effective increase of the first cracking load; however, both types of fibers allowed a better crack width control respect to the standard RCP. In this regard, basalt microfiber reinforced concrete led to a better response caused by concentrated loads (jacketing) whilst polypropylene macrofibers increased the concrete pipe performance in terms of bearing capacity and flexural crack control. The hybrid fiber reinforced concrete was found to be the most suitable alternative for increasing the load bearing capacity and the crack width control for service loads. These incipient experimental results permit to conclude that this type of hybrid basalt-polypropylene fiber reinforced concretes are an interesting alternative to traditional steel-cage RCPs., This work is supported by the National Key Research and Development Program of China (2018YFC1504802), Natural Science Foundation Project of Chongqing, Chongqing Science and Technology Commission (cstc2018jscxmszdX0071), Postgraduate Research Innovation Project of Chongqing (CYS19005, CYS18026). In addition, Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reliability-based assessment of the partial factor for shear design of fibre reinforced concrete members without shear reinforcement

  • Bairán García, Jesús Miguel
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and the same partial factor accepted for RC structures is accepted for FRC elements. This approach, however, is potentially on the unsafe side since the uncertainties of some design-determining mechanical properties of FRC (i.e., residual flexural strength) are larger than those for RC. Therefore, in this study, a comprehensive reliability-based calibration of the partial factor γc for the shear design of FRC members without shear reinforcement according to the fib Model Code 2010 model is performed. As a first step, the model error δ is assessed on 332 experimental results. Then, a parametric analysis of 700 cases is performed and a relationship between the target failure probability βR and γc is established. The results demonstrate that the current model together with the prescribed value of γc = 1.50 does not comply with the failure probabilities accepted for the different consequences of failure of FRC members over a 50-year service life. Therefore, changes to the shear resistance model are proposed in order to achieve the target failure probabilities., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Statistical analysis of an experimental database on residual flexural strengths of fiber reinforced concretes: performance-based equations

  • Galeote Moreno, Eduardo
  • Picazo, Alvaro
  • De Marcos Garcia, Alberto
  • Fuente Antequera, Albert de la
  • Enfedaque, Alejandro
  • Gálvez, Jaime C.
  • Aguado de Cea, Antonio
The postcracking capacity of fiber reinforced concrete (FRC) mainly depends on the content, material, and geometry of the fibers considered. Even though the general influence of these factors on FRC behavior has been extensively addressed, the uncertainty of the FRC performance prediction along with the variability of the results still poses a challenging issue that needs to be solved to encourage the use of FRC for design and construction purposes. In this line, a database including the results of the flexural residual strength obtained from different experimental programs combined with the results of previous studies has been gathered and analyzed herein to obtain general correlations and trends providing additional information about the influence of the fibers in FRC behavior, these meant to serve for initial design stages (e.g., make decisions on the type and amount of fibers based on technical and economical requirements). The results are analyzed distinguishing between the fiber material, the fiber shape, the aspect ratio and tensile strength. The results presented herein may provide valuable information on the initial prediction of the residual strength of FRC to fully take advantage of the mechanical properties of the material., The authors from UPC wish to express their acknowledgment to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects BIA2016-78742-C2-1-R and PID2019-108978RB-C32., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Structural performance of chloride-corroded hybrid fibre-reinforced concrete under sustained loads

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade Perdrix, Carmen
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Cracks in concrete act as preferential pathways for agents from the exterior, which may trigger detrimental corrosion processes. The addition of fibres to concrete is reported to alter cracking formation and to improve its post-cracking behaviour. This paper an experimental campaign with the objective of comparing the structural performance of two types of reinforced concrete ele-ments subjected to chloride ingress: conventionally reinforced and reinforced using a hybrid approach, where in addition to steel bars, fibres are also used. Specimens were exposed to 3% NaCl under varying cracking conditions. Non-destructive tests (corrosion potential, corrosion current and resistivity of the concrete matrix) were used to monitor corrosion. After the exposure, specimens were subjected to bending until failure in a three-point bending test. In all specimens, corrosion initiation during the first month was detected based on the value of corrosion potential below –200 mV. In the third month of exposure, one specimen showed signs of a high corrosion rate (1.48 µA/cm2), whereas others showed signs of moderate corrosion (0.13–0.78 µA/cm2). Based on visual inspection, corrosion products were observed to concentrate in cracked regions of all specimens., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Macrosynthetic fibers as replacement of conventional steel reinforcement for concrete of partition walls

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro
  • Monserrat López, Andrea
  • Bourqui, Didier
  • Fuente Antequera, Albert de la
Conventional reinforced concrete for building partition walls has proven numerous advantages (in terms for instance of acoustic performance and robustness) with respect to other existing alternatives. However, its use leads to high material consumption and environmental footprint together with time-consuming processes for placing steel reinforcement. To reduce time-consuming processes and carbon footprint, the replacement of ordinary steel reinforcement by structural macrofibers is envisioned as a suitable solution due to: (1) the acceptance of fiber reinforced concrete (FRC) for structural applications in various guidelines (as Annex L of FprEN 1992-1-1:2023, draft for future Eurocode 2) and (2) the fact that the amounts of fibers necessary to reach the required mechanical performance of the FRC for crack control are expected to be economically competitive. Additionally, within the spectra of types of macrofibers capable of efficiently reinforce concrete, macrosynthetic fibers (MSFs) were considered in this research due to their benefits in terms of durability performance and reduced environmental impact (potential to use cements with lower clinker content and reduced thickness of elements). Aiming at confirming both the constructability, casting procedure and structural performance of macrosynthetic fiber reinforced concrete (MSFRC) partition walls, these walls were constructed in a real building in Switzerland. In this article, the design process is presented as well as the associated MSFRC material and structural experimental programmes, conducted both in laboratory and on-site. In addition, several FEM-modeling considerations as well as quality control and construction aspects observed during the implementation process are raised. Finally, for reference purposes, a first approach to the economic and environmental impact (CO2eq-based) of such MSFRC walls is presented., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chloride-induced corrosion effects on the structural performance of concrete with rebar and fibres: a review

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade, Carmen
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Chloride-induced corrosion is a major contributor in the degradation of standardised steel-based products (e.g., rebars and fibres) commonly used for reinforcing concrete structures. Since cracked reinforced concrete elements are determined to be more susceptible to corrosion on the one hand, and fibres are effective in arresting crack growth and improving the post-cracking mechanical behaviour on the other hand, the use of fibres emerges as a promising strategy to enhance durability. This review is focused on the degradation of the load-bearing capacity, caused by chloride corrosion, in concrete elements reinforced with fibres and conventional rebar. Based on the recorded values of ultimate loads and the corresponding deflections in the reviewed studies, a lower decrease in the load-bearing capacity and less severe degradation of ductility were observed in elements where fibres (either steel or macro-synthetic) were used in combination with rebar compared with elements where only rebar was used. Furthermore, the recorded values of corrosion potential (Ecorr), corrosion current density (icorr) and gravimetric measurements indicated lower corrosion damage, delayed corrosion initiation and a prolonged propagation phase of corrosion. However, due to many differences in the methodology among the reviewed studies, the optimal fibre type or quantity cannot be identified unless more studies are performed., This research was supported by the Master Builders Solutions GmbH, Germany, the Ministry of Science and Investigation (Ministerio de Ciencia, Innovación y Universidades) the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain. Project reference: PID2019-108978RB-C32; grant reference: PRE2020-095457. Support was provided by project Hormigones Reforzados con Macrofibras Sintéticas para Aplicaciones Estructurales en condiciones de altas temperaturas (HEAT), project reference: PID2023-149321OB-C32., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability-oriented model to decide on concrete pipeline reinforcement

  • Josa i Culleré, Irene
  • Fuente Antequera, Albert de la
  • Casanovas Rubio, Maria del Mar
  • Armengou Orús, Jaume
  • Aguado de Cea, Antonio
The design of sustainable sewerage infrastructure is fundamental for achieving long-term sustainability goals. Piping systems are essential components in the water supply chain and in waste disposal systems worldwide. Among possible designs for concrete pipes, steel cages consisting of curved rebars have been predominantly used as reinforcement. However, structural fibres have emerged as an attractive technical and economical alternative for substituting steel cages. Due to increasing urbanisation, thousands of kilometres of pipes will be constructed in the near future. At present, decisions regarding reinforcement of concrete pipes are primarily cost-driven. To consider other aspects, it is fundamental to identify and quantify potential sustainability issues properly. Hence, this paper focuses on the sustainability analysis of reinforced concrete pipes using a multi-criteria decision-making method. A model based on criteria, indicators, weights and value functions is developed and calibrated by assessing various concrete reinforcement strategies (steel bars or steel/synthetic fibres). The main contributions of the article are the proposal and application of a model for the case of concrete pipes which can be adapted for other case studies; determining how different typologies of pipes contribute to the overall sustainability of infrastructure systems; and the use and application of a robust and interesting multi-criteria decision-making methodology. The results show that fibre reinforced concrete pipes are promising alternatives in social, economic and environmental terms. Both the model and results are expected to be useful to stakeholders in decision-making processes., The research received financial support from the Ministry of Economy, Industry and Competitiveness of Spain under the scope of the projects PID2019-108978RB-C32. Besides, Irene Josa was supported by the Catalan Government through a grant from Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR), with reference number 2018 FI-B 00655. Maria del Mar Casanovas-Rubio is a Serra Húnter Fellow., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An enhanced multi-criteria decision-making approach oriented to sustainability analysis of building facades: a case study of Barcelona

  • Gilani, Golshid
  • Hosseini, Seyed Mohammad Amin
  • Pons Valladares, Oriol
  • Fuente Antequera, Albert de la
As one of the main and largest components, facades make a determining contribution to the sustainability performance of the whole building. Thus, selecting the optimal wall system is a key challenge for designers, especially on multi-material facades. To meet the requirements (i.e., cost, energy performance, aesthetics, maintainability) determined by stakeholders (i.e., client, authorities, designers), this selection involves many variables, several of which are subjective and uncertain, leading to a challenging decision-making process. In this context, this research intended to design and calibrate a new sustainability-oriented approach for selecting multi-material facade systems, and this is the first existing model for this purpose to the authors' best knowledge. The model couples MIVES and the Knapsack algorithm to generate sets of multiple-material facades, once the boundary conditions are established, and select according to sustainability indexes. A building in Barcelona with a multi-material facade was analysed by using the proposed approach to: (1) determine the optimal combination of materials and wall systems to configure the facade, based on both local technical and legislation requirements; and (2) validate the results of the model. In this regard, the results proved that most solutions with the highest sustainability index consisted of a wall with 10 cm concrete panel, 4 cm Rockwool insulation, 7 cm interior Rockwool insulation, and 2 layers of gypsum board. This was the combination implemented for the building object in the study case. The model can be adapted to different boundary conditions, regional regulations and stakeholders’ preferences. This approach is being introduced within Barcelona Council to analyse the sustainability of existing facades for the purposes of renovation and new building projects., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

  • Tošić, Nikola
  • Peralta Martínez, Dorca
  • Hafez, H.S.
  • Reynvart, Igor
  • Ahmad, Muneer
  • Liu, Guanzhi
  • Fuente Antequera, Albert de la
Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m3 of polypropylene fibres. After recycling, the obtained coarse recycled concrete aggregates (RCAs) were used in new concrete with 0 and 6 kg/m3 of polypropylene fibres, repeating for three generations always with the same quantities of fibres. Properties of RCA, the mechanical properties of recycled aggregate concrete, the recovery rate of polypropylene fibres and the content of fibres embedded within the RCA were measured. The results of the study show that RCA obtained by PPFRC recycling offers significant benefits to new concrete production. This is achieved through the recovered fibres reintroduced into the new concrete, as well as through the fibres embedded in the recycled aggregates, leading to increased residual tensile strength., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Short and long term behaviour of polypropylene fibre reinforced concrete beams with minimum steel reinforcement

  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fibre reinforced concrete (FRC) has quickly become an attractive solution for increasing both the mechanical performance and sustainability of concrete structures. In particular, polymeric fibres are increasingly recognized as offering significant benefits for FRC structural applications, especially in areas such as durability. Nonetheless, the behaviour of such FRC remains to be fully understood, especially from the perspective of long-term effects such as shrinkage and creep. Therefore, in this study, a comprehensive experimental programme is carried out for short- and long-term characterization of polypropylene FRC (PPFRC). The experimental program consisted of producing concretes C40/50 with 0, 3 and 9 kg/m3 of polypropylene fibres. Besides specimens for testing mechanical properties, shrinkage and creep in compression and under bending were tested. Finally, full-scale 3–m span beams with minimum steel reinforcement (0.18%) were tested until failure and under sustained loads. The results are analysed and the contribution of polypropylene fibres to reducing deflections and crack widths is assessed, with no evidence of local flexural failures due to tertiary creep phenomena. The results of this study can provide a contribution towards a fuller understanding of PPFRC structural behaviour and its future incorporation into design codes., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from MBCC Group. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of accelerated aging and silica fume addition on the mechanical and microstructural properties of hybrid textile waste-flax fabric-reinforced cement composites

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
Incorporating eco-friendly substances obtained from recycled resources and industrial by-products is gaining increased acceptance among building materials. In this context, a cementitious matrix containing supplementary cementitious materials (SCMs) reinforced by recycled fibers may be a promising solution from both a durability and sustainability perspective. This study presents an extensive experimental program carried out on a cement- based composite with Silica Fume (SF), reinforced with recycled textile waste (TW) nonwoven fabric. Initially, the mechanical strength (compression and flexure) of the Portland cement paste substituted with variable SF content (0%–30%) was characterized. Based on the results, laminate plates having six TW fabric layers impregnated with three different cement pastes, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A textile waste fiber-reinforced cement composite: comparison between short random fiber and textile reinforcement

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
Currently, millions of tons of textile waste from the garment and textile industries are generated worldwide each year. As a promising option in terms of sustainability, textile waste fibers could be used as internal reinforcement of cement-based composites by enhancing ductility and decreasing crack propagation. To this end, two extensive experimental programs were carried out, involving the use of either fractions of short random fibers at 6–10% by weight or nonwoven fabrics in 3–7 laminate layers in the textile waste-reinforcement of cement, and the mechanical and durability properties of the resulting composites were characterized. Flexural resistance in pre- and post-crack, toughness, and stiffness of the resulting composites were assessed in addition to unrestrained drying shrinkage testing. The results obtained from those programs were analyzed and compared to identify the optimal composite and potential applications. Based on the results of experimental analysis, the feasibility of using this textile waste composite as a potential construction material in nonstructural concrete structures such as facade cladding, raised floors, and pavements was confirmed. The optimal composite was proven to be the one reinforced with six layers of nonwoven fabric, with a flexural strength of 15.5 MPa and a toughness of 9.7 kJ/m2., This research was funded by the Spanish Ministry of Economy, Industry, and Competitiveness, RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed, Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Field monitoring of mechanical parameters of deep-buried jacketed-pipes in rock: Guanjingkou water control project

  • Deng, Zhiyun
  • Liu, Xinrong
  • Zhou, Xiaohan
  • Fuente Antequera, Albert de la
  • Han, Yafeng
  • Xiong, Fei
  • Peng, Haoyang
To monitor the mechanical performance of a deep-buried rock-jacketed pipe within the scope of the Guanjingkou Water Control Project in Chongqing during construction, an extensive field experimental program was performed. The pipe–rock contact pressure, pipe deformation, and jacking load eccentricity were monitored. Regarding the pipe-rock contact pressure, the following conclusions can be drawn: (1) the magnitude was independent of the pipeline depth; (2) the maximum magnitudes were detected at the crown and decreased towards the invert due to the pipe buoyancy; (3) the magnitude was constant at the crown and sides for increasing jacking forces, whereas it increased or decreased at the invert with pipe-uplift or pipe-incrustation into the surrounding rock, respectively. With regard to the strain patterns measured on the pipe, the results demonstrated that magnitude of those was only significant for high jacking force magnitudes. The experimental approach followed and the results obtained were found to be useful for future projects because such results are rarely reported., This study is supported by the National Natural Science Foundation of China (Grant No. 12102230), the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071). Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
  • Claramunt Blanes, Josep
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Predicting flexural post-cracking strength of fiber-reinforced concrete in the Barcelona test using a neural network-aided approach

  • Ikumi Montserrat, Tai
  • Galeote Moreno, Eduardo
  • Pujadas Álvarez, Pablo
  • Fuente Antequera, Albert de la
  • López Carreño, Rubén-Daniel
Structural fibers represent an effective strategy for enhancing the post-cracking tensile strength (fctR) of concrete. Currently, the characterization of this property relies predominantly on experimental methods, introducing uncertainties during the design phase and impeding advancements in new fiber types or the optimization of existing ones. This paper introduces a multilayer perceptron neural network designed to predict the fctR of fiber-reinforced concrete (FRC) undergoing the Barcelona Test. The optimal architecture of the predictor is determined through the evaluation of 9216 configurations involving input dimensions and the number of hidden layers and neurons. Generalization performance is rigorously assessed using repeated random sub-sampling validation across 50 iterations. The finalized model demonstrates a high accuracy in predicting fctR for various cracking stages in FRC (R2 of 0.87, 0.86, and 0.83). A comprehensive parametric analysis is conducted to establish coherence between the model's predictions and the established understanding of FRC behavior. Furthermore, numerical expressions are presented as an alternative tool to traditional testing, offering predictions for the residual strength of the Barcelona Test. These predictions consider factors such as fiber dosage, concrete strength, specimen type, height, and fiber geometric characteristics, serving as valuable tools for pre-design and quality control purposes. Such approaches are essential for fostering advancements in FRC technology., T. Ikumi is supported by the Torres Quevedo programme PTQ2018-009877 sponsored by the Spanish Ministry of Science and Innovation. The authors also express their gratitude to the same Spanish Ministry for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32) and to the Catalan agency AGAUR trough their research groups support program (2021 SGR 00341). Finally, P. Pujadas wishes to recognise the support from Serra Hunter programme., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical and durability characterization of a new textile waste micro-fiber reinforced cement composite for building applications

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
Fiber reinforced mortars (FRM) are growingly used in several fields of building technology (e.g., façade panels, roofing, raised floors and masonry structures) as building elements. One of the promising type of fiber for these composite materials can be textile waste originated from cloth wastes. The use of this sort of recycled materials and wastes as cement reinforcement within the building sector can play a relevant role in sustainability, both the environmental, economic and social perspectives. In this paper, the design mechanical properties (flexural and compressive strengths at 7, 28 and 56 days as well as toughness and stiffness) together with durability properties of cement pastes reinforced with short Textile Waste Fiber (TWF) in contents ranging from 6 to 10 % by weight fraction cement was investigated. The results were compared with those obtained from Kraft Pulp pine Fiber (KPF), taken as reference. The main conclusion is the feasibility of using this type of fiber as potential reinforcement in construction materials with the optimum dosage of 8%. Although the flexural resistance and toughness of the TWF composite are lower than KPF control by almost 9%, the compressive strength and stiffness together with durability properties have proven to be enhanced respect to the reference composite., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of design constitutive model for plastic fibre reinforced concrete through inverse analysis

  • Galeote Moreno, Eduardo
  • Nogales Arroyo, Alejandro
  • Fuente Antequera, Albert de la
The increasing use of fibre reinforced concrete (FRC) as a structural material requires a constant development of new tools for design purposes. In this line, different codes and guidelines include constitutive models for FRC in their specifications. However, these constitutive models are usually based on the behaviour of steel fibre reinforced concrete (SFRC) and present several limitations on representing the full behaviour of macro-synthetic fibre reinforced concrete (MSFRC). With the aim of analysing the suitability of the constitutive models when applied on macro-synthetic fibres, an experimental program to determine the performance of MSFRC using different fibre contents and concrete mixes was performed. The study of the constitutive models was conducted through an inverse analysis using a two-dimensional analytical model to verify and compare the FRC constitutive equations of the MC2010 with the experimental results. The constitutive model of MC2010 was selected given that it is able to capture both the softening and hardening behaviour of FRC through a three-point constitutive equation. The results show that the original constitutive model of the MC2010 tends to overestimate the performance of PFRC. Moreover, it could be necessary to include an additional point on the post-cracking branch of the constitutive model to represent more accurately the full residual strength of PFRC. The results also show that the ultimate strain of the constitutive model should be extended to fully capture the performance of PFRC, especially for large deformations. This study suggests that it should be necessary to redefine the constitutive models through a new approach distinguishing between FRC blended with steel or macro-synthetic fibres., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexural performance of a new hybrid basalt-polypropylene fiber-reinforced concrete oriented to concrete pipelines

  • Deng, Zhiyun
  • Liu, Xinrong
  • Liang, Ninghui
  • Fuente Antequera, Albert de la
  • Peng, Haoyang
The bending performance of a basalt-polypropylene fiber-reinforced concrete (HBPFRC) was characterized by testing 24,400 × 100 × 100 mm3 prismatic specimens in a four-point bending test JSCE-SF4 configuration. The type and content of both fibers were varied in order to guarantee different target levels of post-cracking flexural performance. The results evidenced that mono-micro basalt fiber reinforced concrete (BFRC) allows the increase of the flexural strength (pre-cracking stage), while macro polypropylene fiber reinforced concrete (PPFRC) can effectively improve both bearing capacity and ductility of the composite for a wide crack width range. Compared with the plain concrete specimens, flexural toughness and equivalent flexural strength of macro PPFRC and the hybrid fiber-reinforced concrete (HFRC) increased by 3.7–7.1 times and 10–42.5%, respectively. From both technical and economic points of view, the optimal mass ratio of basalt fiber (BF) to polypropylene fiber (PPF) resulted in being 1:2, with a total content of 6 kg/m3. This HFRC is seen as a suitable material to be used in sewerage pipes where cracking control (crack formation and crack width control) is of paramount importance to guarantee the durability and functionality of the pipeline as well as the ductility of the system in case of local failures., This research project was funded by the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32), the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071) and National Natural Science Foundation of China (Grant No. 41772319)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad
  • Bajic, Petar
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
  • Turmo Coderque, José
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Rotation and moment redistribution capacity of fiber-reinforced concrete beams: parametric analysis and code compliance

  • Nogales Arroyo, Alejandro
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Fiber-reinforced concrete (FRC) has been proved to be a competitive solution for structural purposes. Extensive research has highlighted the benefits of adding fibers on the post-cracking strength, reduced crack spacing and crack width, and improved durability, among others. However, these aspects are related to serviceability limit states, and significant work remains to be done in terms of ultimate limit state behavior of FRC members. As recent publications have emphasized, reinforced concrete beams with low reinforcement ratios may result in a reduction of deformation capacity and, hence, to a loss of ductility. To further investigate this topic, this paper presents the results of a numerical parametric study of simply and continuous supported hybrid-reinforced concrete (HRC) beams made with different amounts of fibers and reinforcement ratios. The deformation, rotational, and moment redistribution capacity of those were assessed by means of a finite-element model previously calibrated using experimental results available in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced (hybrid) members. Finally, the paper contains practical recommendations in terms of minimum reinforcement ratios that guarantee adequate rotation and redistribution capacity of HRC members. As such, the results of this study can provide a contribution toward more reliable structural designs of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC's Spin-Off)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 2: experimental programme on walls cast on site

  • Nogales Arroyo, Alejandro
  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Monserrat López, Andrea
  • Bourqui, Didier
  • Fuente Antequera, Albert de la
In the context of an experimental programme on the use of macrosynthetic fibre reinforced concrete (MSFRC) for casting building partition walls, three walls from a residential building in Switzerland were selected for an onsite application (with lengths varying between 2.8 and 13 m). The walls had an amount of fibres equal to 4 kg/m3 and only conventional reinforcement at the construction joints with adjacent walls. In addition, specimens were cast in order to measure the strength, rheological properties and characterise the post-cracking behaviour of MSFRC. A crack monitoring protocol was conducted on the walls for crack detecting and tracking their evolution over time, with no noticeable cracks in the short walls. The cracks detected for the 13 m-long wall were measured and the results summarized in this document. This research contribution aims at showcasing the use of MSFRC as an alternative to ordinary reinforcement for building partition walls, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effective moment of inertia and slenderness limits of reinforced concrete and fiber-reinforced concrete slabs

  • Tošić, Nikola
  • Sanabra Loewe, Marc
  • Nogales Arroyo, Alejandro
  • Fuente Antequera, Albert de la
Following the trend of updating methods that establish the minimum slenderness of concrete members based on the work by Rangan and Scanlon, this paper elaborates new formulations of the effective moment of inertia factor (a), which expresses the ratio of the equivalent moment of inertia to the gross moment of inertia. For this purpose, closed-form solutions for a in reinforced concrete (RC) and fiber-reinforced concrete (FRC) one-way members are derived. Further, a parametric study is carried out to evaluate the relationship of the neutral axis position in RC and FRC members with equal longitudinal reinforcement ratios. Additionally, a simplified equation is proposed for the neutral axis position in FRC members. Based on experimental and numerical data on deflections of FRC members, the expression for the effective moment of inertia is adjusted. Finally, a comparison between a factors for RC and FRC members is presented and implications for minimum thicknesses of members are discussed., The authors thank Professor A. Scanlon for his support in pursuing this research topic. Professor A. de la Fuente wants to express his gratitude to received under the scope of the project CREEF (PID2019-108978RB-C32), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis and application of friction calculation model for long-distance rock pipe jacking engineering

  • Deng, Zhiyun
  • Liang, Ninghui
  • Liu, Xinrong
  • Fuente Antequera, Albert de la
  • Lin, Peng
  • Peng, Haoyang
For long-distance rock pipe jacking, the coupled actions of mud float and sediment generate pipe-rock interactions, which are challenging from the analysis point of view and the general methods available for calculating the friction resistance of pipe-soil can lead to unrepresentative results. These friction forces must be quantified properly, as the magnitude of those determines the technical and economical construction requirements. In this regard, a novel approach that combines experimental and numerical stages is proposed in this research paper for dealing with the assessment of these friction forces. The results derived from the proposed approach were compared and validated with others obtained from a practical case, with satisfactory outcomes. The approach proposed herein is found to be a valuable guide for assessing the magnitude of the frictional forces that occur during the pipe jacketing and for identifying the parameters that govern the magnitude of these forces. Eventually, design and construction optimization and productivity-oriented measures can be derived from the application of the method., This study is supported by the National Key Research and Development Program of China (Grant No. 2018YFC1504802), Natural Science Foundation Project of Chongqing (Grant No. cstc2018jscx-mszdX0071). Prof. Albert de la Fuente also wants to express his gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

A discussion on the reliability of prEN1992-1-1:2021 shear strength provisions for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola
  • Bairán García, Jesús Miguel
  • Fernández Ruíz, Miguel
  • Fuente Antequera, Albert de la
The Eurocode 2 for the design of concrete structures (EN1992-1-1:2004) is undergoing a revision that will lead to the publication of the second generation of this code to be used across all CEN member countries. Therefore, the impact of the code will reach hundreds of millions of people. Importantly, the Eurocode 2-revision will incorporate many significant changes, amongst which is the introduction of design provisions for fibre reinforced concrete (FRC). In this regard, one of the most important aspects for ultimate limit state (ULS) design will be the consideration of the shear strength of FRC members without shear reinforcement. Such a failure mode is associated with a number of uncertainties, as well as with a potentially-brittle failure response. However, so far, the design models proposed in the Eurocode 2-revision have not been accompanied by a robust reliability-based calibration of the FRC partial factor ¿SF. Within this context, this paper presents the results of an investigation on the safety format and the partial factor ¿SF for FRC members without shear reinforcement currently provisioned in the draft for the new Eurocode 2 (prEN1992-1-1:2021). Firstly, a database of experimental results on FRC beams is used to determine the model error. On that basis, a probabilistic analysis is performed using the First Order Reliability Method (FORM) to determine adequate values of ¿SF for varying target reliability indices. The results of the study show how ¿SF values need to updated in order to reach reliability indices typically considered for ULS design. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Reliability of shear strength models for fibre reinforced concrete members without shear reinforcement

  • Tošić, Nikola
  • Bairán García, Jesús Miguel
  • Fuente Antequera, Albert de la
The scope and amount of fibre reinforced concrete (FRC) structural applications have seen significant increases. This means that safe and reliable ultimate limit state (ULS) models are necessary for FRC structural members. Among these, shear strength of FRC members without shear reinforcement is highly important due to the brittleness of shear failure. Because of this, the fib Model Code 2010 introduced two shear strength models: an empirical model based on Eurocode 2 and a physical model based on the Modified Compression Field Theory. However, a comprehensive reliability assessment of these models has been lacking. Therefore, in this study, the safety format of these models is assessed and the partial safety factors for FRC in shear, ¿c and ¿F are updated. As a first step, a large database of experimental results on FRC beams is used to determine model uncertainties. Following this, a comprehensive parametric probabilistic analysis is performed using the First Order Reliability Method to determine the adequate values of ¿c for different target reliability indices ß. The results of this study show that in order to reach typical reliability indices used in ULS design, ¿c and ¿F values need to be increased for FRC members without shear reinforcement for both models proposed by the fib Model Code 2010., This study has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 836270. This support is gratefully acknowledged. The authors also wish to express their acknowledgement to the Ministry of Economy, Industry and Competitiveness of Spain for the financial support received under the scope of the projects PID2019-108978RB-C32. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A limit state design approach for hybrid reinforced concrete column-supported flat slabs

  • Aidarov, Stanislav
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Hybrid reinforced technology (combination of steel reinforcing bars and fibers) can be considered as a competitive alternative to the already existing solutions for the construction of column-supported flat slabs. Constructed hybrid-reinforced buildings prove that hybrid solutions have sufficient bearing capacity to maintain structural integrity despite being exposed to high stress levels, thereby providing a beneficial solution in terms of toughness, ductility, and sustainability performance. However, the lack of design-oriented recommendations based on the accepted limit state format for dealing with both serviceability and ultimate limit states slows down the wider implementation of this technology. Considering the above-mentioned, this article presents a simplified design-oriented method that covers the evaluation of the structural response of hybrid reinforced concrete column-supported flat slabs in terms of flexural strength, cracking, and instantaneous deformations. Two hybrid reinforced alternatives for a given flat slab are studied by means of the proposed approach. Furthermore, a nonlinear finite element analysis is carried out in order to evaluate the effectiveness of the developed simplified method. Based on the achieved results, its suitable accuracy and precision can be pointed out. This outcome may motivate current practitioners to consider hybrid reinforced concrete solutions as a possible alternative during the design of residential and office buildings., Departament d'Innovació, Universitats i Empresa, Generalitat de Catalunya, Grant/Award Number: 2018 DI 77; Ministerio de Ciencia e Innovación, Grant/Award Number: CREEF (PID2019-108978RB-C32), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modified digital image correlation aided measurement of the transverse to longitudinal deformation ratio for polymeric macro-fibres

  • Ikumi Montserrat, Tai
  • Pujadas Álvarez, Pablo
  • de la Cruz, Janill Marie
  • Segura Pérez, Ignacio
  • Fuente Antequera, Albert de la
Considering the increasing interest of polymeric macro-fibres reinforced concrete, a simple and straightforward method to assess the fibre’s transverse to longitudinal deformation ratio (¿f) becomes a determining aspect in terms of fibre both characterization and fibre–matrix interaction optimization. A noncontact optical measurement procedure to assess this ratio (¿f) - for concrete reinforcement - by a modified 2D Digital Image Correlation method is presented in this paper. This ratio (¿f) has influence on the matrix-fibre interaction and, thus, on the post-cracking tensile response of the concrete composite. Details on the definition, implementation and validation of this measurement procedure are presented. Additionally, an experimental program on 20 selected lab grade and commercial fibres was carried out to analyse the consistency of the measurements and the influence of the fibre’s geometric characteristics (flat, curved, embossed or crimped) on the ¿f. The outcomes of this research and the experimental procedure proposed are meant to assist fibre producers on the design process of optimized fibres to be used in structural concrete., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of a textile waste nonwoven fabric reinforced cement composite for non-structural building components

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
Large amounts of nonrenewable resources are depleted by the construction industry in addition to the generation of million tons of mineral waste and carbon dioxide gas every year. For the sake of a more sustainable consumption pattern of building materials, as well as for reducing the waste flux to landfills, the use of recycled materials and wastes should be researched and motivated. In this sense, textile waste (TW) nonwoven fabric from residues of the garments and textile industries are investigated as internal reinforcement for cement-based matrices to enhance ductility and cracking control. To this end, an extensive experimental program was carried out to characterize both the mechanical and durability properties of the composite. The results were compared with those obtained from flax nonwoven fabric, taken as a reference (FNH and FH composites). All the composites showed a remarkable improvement in terms of toughness and post-cracking stress-bearing capacity, six being the optimum number of TW reinforcing layers. Through the analysis of the results obtained, the feasibility of using TW composite as a potential construction material in non-structural applications was confirmed. The extension to structural applications of low-medium responsibility is still required further research; nonetheless, the results are promising to this respect., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00) and CREEF (PID2019-108978RB-C32)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Neural network. Game theory coupled approach for predicting flexural performance of fibre-reinforced concrete

  • López Carreño, Rubén-Daniel
  • Ikumi Montserrat, Tai
  • Fuente Antequera, Albert de la
  • Galeote Moreno, Eduardo
  • Pujadas Álvarez, Pablo
The addition of fibres to concrete is an effective solution for enhancing its post-cracking tensile strength (fctR). Currently, this property is characterized through high-cost and time-consuming experimental tests since no reliable analytical methods exist to predict this mechanical property. This study provides two neural networks for predicting the fctR obtained from flexural beam tests for crack mouth opening displacements of 0.50 mm (fR1) and 2.50 mm (fR3). Network architectures are obtained with an optimization process that involved training 1568 Multi-Layer Perceptron configurations under Monte Carlo cross-validation over 50 iterations, with a total of 78,400 trainings for each fR,i. The resulting models were evaluated using performance metrics including Coefficient of Determination (R2), Correlation Coefficient (CC), Mean Absolute Error (MAE), Root Mean Square Error (RMSE) and Scatter index (SI). High predictive accuracies were achieved for both fR1 (R2 = 0.87, CC = 0.93, MAE = 0.64 MPa, RMSE = 0.90 MPa, SI = 19.2%) and fR3 (R2 = 0.85, CC = 0.92, MAE = 0.73 MPa, RMSE = 0.95 MPa, SI = 19.8%). Furthermore, the analysis of their global and local interpretability through the game-theory-based SHAP explanation method confirms their consistency with established understandings of fibre-reinforced concrete (FRC) behaviour. Moreover, numerical expressions are proposed as an alternative to traditional testing methods, offering a tool to predict the flexural post-cracking tensile strength for pre-design and quality control purposes of FRC structures. These approaches are deemed essential for advancing FRC technology marking a significant advancement in addressing the design limitations and widespread application challenges associated with the material., This work was supported by the Catalan agency AGAUR through its research group support program (2021 SGR 00341) and by the Spanish Ministry of Science and Innovation under the scope of project CREEF (PID2019-108978RB-C32/AEI/10.13039/ 501100011033)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

3D-printed concrete footbridges: an approach to assess the sustainability performance

  • Asensio Cuadra, Javier
  • Josa i Culleré, Irene
  • Montserrat López, Andrea
  • Fuente Antequera, Albert de la
Digital fabrication with concrete (DFC) is fast becoming an attractive alternative for components (i.e., façades, urban furniture) and structural typologies (i.e., short-span footbridges, columns, floor systems) for which complex geometries derived from particular aesthetical criteria and/or construction time constrictions are governing parameters. Additionally, some authors claim that this process allows improving the sustainability of structures, as less material is necessary compared to traditional concrete solutions, thus reducing greenhouse gas emissions linked to material consumption. Nonetheless, the environmental implications of DFC are still under scrutiny and remain objectively unquantified. In this study, a sustainability assessment model to allow decision-makers to evaluate and compare concrete footbridge alternatives—from the sustainability perspective—including those constructed by means of 3D printed concrete (3DPC) techniques, is presented. The proposed approach is based on the MIVES method. For this purpose, the most representative criteria and indicators of sustainability identified are measured and weighted-aggregated in a decision-making tree. The sustainability index (SI) of each alternative is the outcome derived from the application of the model, and the SI was used as reference for evaluating the alternatives. The sustainability of 3D-printed footbridges is quantified and compared to other concrete-based solutions: traditional reinforced cast-in-place and precast concrete, as traditional solutions, and ultra-high performance precast concrete and textile-reinforced concrete, as innovative alternatives. The results of the analysis lead to conclude that 3D-printed footbridges have positive impacts on environmental and social indicators, but economic indicators still need to be improved to attain a competitive solution. The approach proposed herein to assess the sustainability of footbridges can be extended to other cases and stakeholders' preferences by adapting the components of the method to sensitivities and particular boundary conditions of other scenarios., The authors want to acknowledge ACCIONA, S.A. for the economic funds and information provided. This study was also financially supported by the Spanish Ministry of Sci-ence and Innovation under the scope of project CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). A. Monserrat was supported by the Ministerio de Uni-versidades (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/ 2021) of NextGenerationEU; Postdoctoral Margarita Salas Fellowship funded by Universitat Politècnica de València., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Macro-synthetic fibre reinforced concrete partition walls for buildings. Part 1: experimental programme and real-scale prototype

  • Fernández Ruíz, Miguel
  • Redaelli, Dario
  • Nogales Arroyo, Alejandro
  • Monserrat López, Andrea
  • Bourqui, Didier
  • Fuente Antequera, Albert de la
The use of conventional reinforced concrete for building partition walls has proven several benefits in terms of acoustic performance and robustness. Horizontal reinforcement is typically governing in their design, and arranged to control cracking due to shrinkage and imposed deformations. In view of reducing material consumption and CO2eq, an alternative reinforcement concept based on the use of macro-synthetic fibres (MSFRC) is proposed in this paper and applied in practice within an actual building recently completed in Switzerland. This paper collects the research and practical experiences of the authors and aims at addressing questions that may arise during the construction and design stage of such members. To this end, a real-scale cast-in-situ MSFRC prototype wall of h/b/t = 2.8/1.2/0.15 m was cast. The objective is to shed some light on the casting procedure for wall elements and to assess the mechanical and rheological properties of the mix and fibre distribution and orientation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental characterization of comfort performance parameters and multi-criteria sustainability assessment of recycled textile-reinforced cement facade cladding

  • Sadrolodabaee, Payam
  • Hosseini, Seyed Mohammad Amin
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Haurie Ibarra, Laia
  • Lacasta Palacio, Ana María
  • Fuente Antequera, Albert de la
Within the building construction sector, fiber cement boards have attracted interest as facade cladding materials in the last ten years, especially those that incorporate –for reinforcing purposes– natural and/or recycled synthetic fibers (i.e, from the textile industry). So far, the design-governing parameters of facade cladding panels have been mechanical strength, durability, constructability, aesthetics, insulation capacity, and fire resistance. From the sustainability perspective, the impact of the facade on the economic and energy efficiency performance is most often the parameter that leads the decision-making process. Within this context, the quantification of the sustainability performance of the facade –accounting for economic, environmental, and social indicators– is unfrequently carried out in design and project phases, this being attributed to the lack of methodologies that allow considering and quantifying some relevant indicators representative of the facade sustainability performance. As consequence, decisions made based on solely economic and on some of the environmental indicators might lead to solutions with lower sustainability performance than that required (or expected). Recycled textile waste fabric-reinforced cement board as a facade-cladding material for building envelopes is the focus of this research. In order to characterize the fire resistance, and thermal and acoustic insulation –as relevant serviceability parameters– of this material, an experimental program was carried out. Likewise, the sustainability performance of this facade-cladding is assessed through a method based on the Integrated Value Model for Sustainability Assessment (MIVES). This multi-criteria decision making (MCDM) model relies on the value function concept and the multi-disciplinary participation of experts to identify and quantify the relevant indicators of the facade sustainability performance and the relative importance of indicators and requirements. The MIVES-based model generated for this research can be straightforwardly used for assessing the sustainability performance of facade-cladding techniques made of any material and for any type of building (and location). The application of the MIVES model led to the sustainability index of this new material for facade-cladding ranging from 0.68 to 0.71 (/1.00) for different weighting scenarios., The authors express their gratitude to the Spanish Ministry of Economy, Industry, and Competitiveness for the financial support received under the scope of the projects CREEF (PID2019-108978RB-C32) and RECYBUILDMAT (PID2019-108067RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Effect of sustained load on the flexural bearing capacity of polypropylene fibre and minimum steel-bar reinforced concrete beams

  • Tošić, Nikola
  • Hunger, Martin
  • Vaquero Martinez, José María
  • Fuente Antequera, Albert de la
Macro-synthetic fibres are becoming increasingly attractive as concrete reinforcement in structural applications, polypropylene fibre reinforced concrete, and macro-synthetic fibre reinforced concrete (MSFRC) in general, being an example of this tendency. Nonetheless, further knowledge needs to be gathered in relation with the time-dependant properties (i.e., creep) of the MSFRCs when its use is oriented to design-for-cracking structural elements. For this purpose, an extensive experimental programme was carried out on the flexural load bearing capacity of full-scale MSFRC beams (with mini-mum conventional steel reinforcement). Namely, beams with spans of 3 m and cross-section size of 200×250 mm were produced from a C40/50 concrete with 0 (reference), 3 and 9 kg/m3 of polypropylene fibres. Four beams were cast from each concrete type. After 28 days, two beams from each concrete type were tested until failure in three-point bending configuration. Then, one beam from each concrete was placed under sustained load for one year in a four-point bending configuration, whereas another beam from each concrete was left unloaded for one year under the same environmental conditions. After one year, both remaining beams from each concrete were tested until failure in bending. The results of the tests allowed assessing the effects of the sustained load on the remaining bearing capacity of the beams and confirming that the inclusion of a minimum steel-bar reinforcement was sufficient to prevent the beams from uncontrolled deformations triggered by tertiary tensile creep. The results were accompanied by full physical-mechanical characterization of the concretes. The preliminary results presented herein allow confirming that using MSFRC in cracking-allowed structural applications -with at least minimum mechanical (as per codes) steel-bar reinforcement amount- is reliable from the structural standpoint., The authors want also express their gratitude to the Spanish Ministry of Science and Innovation for the financial support received under the scope of the project CREEF (Creep and Fatigue of fibre reinforced concrete elements) (PID2019-108978RB-C32). This study has also received funding from Master Build-ers Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or rec-ommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Rotation and redistribution capacity of continuous fibre reinforced beams with varying reinforcement ratios

  • Nogales, Alejandro
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
The addition of fibres in concrete has been proven as a competitive solution for structural purposes, either using simply fibre reinforced concrete (FRC) or combining fibres with traditional steel reinforcement to produce hybrid reinforced concrete (HRC). Numerous research has demonstrated the benefits of adding fibres in terms of ductility, post-cracking strength, crack spacing, durability, crack width reduction, enhancement against impact, etc. For structural elements subjected to bending, such as beams, it is known that the use of FRC is beneficial for controlling crack spacing, crack widths, and deflections (i.e., serviceability limit states) but there is still a lot of research to be done in terms of ultimate limit state behaviour. This is particularly true for lightly reinforced specimens in which the addition of fibres may result in a reduction of deformation capacity, a softening response after cracking and a loss of ductility with respect to those without fibres, compromising the rotational capacity and therefore the moment redistribution capacity for statically indeterminate structures. In this regard, this research contribution presents a numerical parametric study of continuous beams cast with different FRC classes (according to fib MC2010) along with different reinforcing ratios of longitudinal reinforcement (varying from 0.13% up to 1.14%). The main goal of this research contribution is to assess the ductility, bearing capacity, ultimate plastic rotation and redistribution capacity of such members. The parametric study has been implemented by means of a finite element model (FEM) previously validated using actual tests published that can be found in the literature. The results showed that there is a significant reduction of rotation capacity and moment redistribution for lightly reinforced beams. The results of this study can provide a contribution towards safer structural design of HRC members., The authors express their gratitude to the Spanish Ministry of Economy, Industry and Competitiveness for the financial support received under the scope of the project CREEF (PID2019-108978RB-C32). Likewise, the first author acknowledges the Spanish Ministry of Science, Innovation and University for providing support through the PhD Industrial Fellowship (DI-17-09390) in collaboration with Smart Engineering Ltd. (UPC’s Spin-Off)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability of column-supported slabs for buildings: a multi-criteria assessment

  • Monserrat López, Andrea
  • Josa i Culleré, Irene
  • Aidarov, Stanislav
  • Pujadas Álvarez, Pablo
  • Fuente Antequera, Albert de la
The global construction industry is experiencing significant growth, driving the demand for building floor area. However, this expansion comes with substantial environmental consequences, including high-energy consumption and greenhouse gas (GHG) emissions, together with economic and social impacts. To address these challenges, this research aims at providing designers and decisions-makers with an approach that will aid the quantification of those impacts relevant for the sustainability performance of flooring systems. A holistic sustainability assessment was performed considering economic, environmental, and social aspects using the Integrated Value Model for Sustainability Evaluations. This study focused on various flooring typologies, including reinforced concrete (RC) and fiber-RC (FRC) slabs with solid and waffle (for RC solution) configurations. The most representative criteria and indicators of sustainability for concrete column-supported slabs were identified, measured, and weighted—aggregated in a decision-making tree—in order to obtain a representative a sustainability index (SI) for each alternative. The results of the analysis evidence that the RC solid slab has a higher overall SI than the other alternatives, the FRC alternatives performing with similar SI of that quantified for the RC solid slab solution and the RC waffle slab being that with the lower sustainability performance among those flooring systems considered in this study. The results of a sensitivity analysis showed that those alternatives using FRC have potential for improving the overall sustainability performance., Peer Reviewed, Postprint (published version)