Pasar al contenido principal

DESARROLLO DE SENSORES MODULARES DE BAJO COSTE PARA SU USO EN IDENTIFICACION ESTRUCTURAL DE PUENTES SOMETIDOS A CARGAS QUASIESTATICAS

PID2021-126405OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 73
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad|||0000-0002-3219-2970
  • Bajic, Petar
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Turmo Coderque, José|||0000-0001-5001-2438
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Automatic calibration of structural BIM models applied to bridges

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Atencio, Edison
  • Tošić, Nikola|||0000-0003-0242-8804
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
Building Information Modeling (BIM) enables the creation of digital twins that simulate physical assets like buildings and infrastructure. Achieving an accurate representation of the true structural behavior necessitates calibrating the properties of these virtual models using real on-site measurements. The calibration process holds particular significance for the federated structural model, as on-site damages can potentially compromise crucial mechanical attributes, jeopardizing the asset’s safety and integrity. Although Structural System Identification (SSI) methods can derive actual parameters from on-site measurements, integrating these calibrated properties into BIM models poses challenges. Typically, the calibration process involves manual operations, such as modifying predefined structural databases and updating properties for damaged elements. This manual approach introduces complexities and potential inaccuracies. This paper proposes a novel approach using Robot Process Automation (RPA) to automate the calibration of BIM structural models. The proposed RPA tool automates the generation of new sections in the structural database and the assignment of updated mechanical properties to damaged elements. By leveraging RPA, the integration of SSI results into BIM models can be significantly enhanced, improving interoperability between architectural and structural federated models. Furthermore, this automation supports informed decision-making in structural assessment and maintenance. To validate the proposed tool, a case study is presented involving the calibration of mechanical properties in a real steel bridge. Autodesk software, including Revit and Robot Structural Analysis, is utilized in this case study. The findings demonstrate the effectiveness and potential benefits of the proposed RPA tool in streamlining the calibration process and ensuring the accuracy of BIM structural models., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OBC32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing the accuracy of low-cost inclinometers with artificial intelligence

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • González-Arteaga, Jesús
  • Xia, Ye
The development of low-cost structural and environmental sensors has sparked a transformation across numerous fields, offering cost-effective solutions for monitoring infrastructures and buildings. However, the affordability of these solutions often comes at the expense of accuracy. To enhance precision, the LARA (Low-cost Adaptable Reliable Anglemeter) system averaged the measurements of a set of five different accelerometers working as inclinometers. However, it is worth noting that LARA’s sensitivity still falls considerably short of that achieved by other high-accuracy commercial solutions. There are no works presented in the literature to enhance the accuracy, precision, and resolution of low-cost inclinometers using artificial intelligence (AI) tools for measuring structural deformation. To fill these gaps, artificial intelligence (AI) techniques are used to elevate the precision of the LARA system working as an inclinometer. The proposed AI-driven tool uses Multilayer Perceptron (MLP) to glean insight from high-accuracy devices’ responses. The efficacy and practicality of the proposed tools are substantiated through the structural and environmental monitoring of a real steel frame located in Cuenca, Spain., This research was funded by FEDER, grant number PID2021-126405OB-C31 and PID2021-126405OB-C32—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, National Natural Science Foundation of China (52278313), and a grant provided by the Polytechnic University of Catalonia with a reference of ALECTORS-2023., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advancements in sustainable prestressed concrete bridge technologies: a comprehensive review

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Amin, Al
  • Xia, Ye
  • Turmo Coderque, José|||0000-0001-5001-2438
Advancements in prestressed concrete bridge technology have increasingly focused on sustainability in response to growing environmental concerns. This review examines recent innovations in integrating recycled concrete aggregates (RCA) and supplementary cementitious materials (SCMs) within prestressed concrete to conserve resources, reduce waste, and lower carbon emissions. Sustainable prestressing techniques, including the use of fiber-reinforced polymer (FRP) tendons and shape memory alloys (SMAs), increase the durability of prestressed concrete bridges, extend service life, and minimize maintenance needs, thereby reducing environmental impact. Key methodologies, such as lifecycle assessment (LCA) and performance-based design, are highlighted for their roles in optimizing structural performance while reducing the ecological footprint. Despite the benefits, barriers to widespread adoption remain, including technical limitations, economic challenges, and regulatory constraints. To address these issues, this review proposes further research on material development, updated design guidelines, cost-benefit analyses, and supportive policy initiatives. The findings confirm that integrating sustainable materials and advanced technologies in prestressed concrete bridge construction offers environmental advantages without compromising structural integrity. Collaborative efforts among engineers, researchers, policy-makers, and educators are essential to overcoming these barriers and advancing sustainable, resilient infrastructure., The authors extend their sincere gratitude for the support provided by the projects PID2021-126405OB-C31, funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. This study is also supported by the Research & Development Program of China Railway Shanghai Group Corporation Limited (2023158), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic behaviour of double-cable systems connected by a rigid cross-tie in long-span cable-supported bridges: a unified approach

  • Zhu, Xiaoqing
  • Zang, Chen
  • Xu, Bin
  • Li, Shengli
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Installing cross-ties between adjacent cables in cable-supported bridges are an effective vibration suppression measure. For a double-cable system connected by a rigid cross-tie (DCS_RCT), this article establishes a generalised dynamic model that comprehensively considers the cross-tie location, cable bending stiffness, sag, tension, inclination angle and mass per unit length. Then, a frequency equation for solving the dynamic characteristics of the system is developed, and its accuracy is verified by comparing to the results reported in the literature for symmetric systems and a numerical simulation model for asymmetric systems. As a parametric model, the proposed frequency equation can be used conveniently in the design of DCS_RCT. Finally, the effects of the cross-tie location, cable length, bending stiffness, tension, mass per unit length, and inclination angle on the dynamic characteristics of DCS_RCT are analysed. The novelty lies in the refined generalised dynamic model for DCS_RCT in cable-stayed and suspension bridges. The frequency equation reveals two distinct frequency modes and quantifies the opposite sensitivity of crossover cable positions in symmetric and asymmetric systems, providing a novel framework for cable vibration suppression. These findings advance the understanding of the DCS_RCT mechanism and offer direct guidance for optimising vibration control in multi-cable bridge systems., The work was supported by the National Natural Science Foundation of China under Grant No. 52108290; the China Postdoctoral Science Foundation under Grant No. 2022 M712906; the Key Scientific and Technological Research Projects of Henan Province under Grant No.212102310975, 222102320436. The support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ‘ERDF A way of making Europe’ is also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Internet of Things long-range-wide-area-network-based wireless sensors network for underground mine monitoring: planning an efficient, safe, and sustainable labor environment

  • Cacciuttolo, Carlos
  • Atencio, Edison
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Lozano Galant, José Antonio
Underground mines are considered one of the riskiest facilities for human activities due to numerous accidents and geotechnical failures recorded worldwide over the last century, which have resulted in unsafe labor conditions, poor health outcomes, injuries, and fatalities. One significant cause of these accidents is the inadequate or nonexistent capacity for the real-time monitoring of safety conditions in underground mines. In this context, new emerging technologies linked to the Industry 4.0 paradigm, such as sensors, the Internet of Things (IoT), and LoRaWAN (Long Range Wide Area Network) wireless connectivity, are being implemented for planning the efficient, safe, and sustainable performance of underground mine labor environments. This paper studies the implementation of an ecosystem composed of IoT sensors and LoRa wireless connectivity in a data-acquisition system, which eliminates the need for expensive cabling and manual monitoring in mining operations. Laying cables in an underground mine necessitates cable support and protection against issues, such as machinery operations, vehicle movements, mine operator activities, and groundwater intrusion. As the underground mine expands, additional sensors typically require costly cable installations unless wireless connectivity is employed. The results of this review indicate that an IoT LoRaWAN-based wireless sensor network (WSN) provides real-time data under complex conditions, effectively transmitting data through physical barriers. This network presents an attractive low-cost solution with reliable, simple, scalable, secure, and competitive characteristics compared to cable installations and manually collected readings, which are more sporadic and prone to human error. Reliable data on the behavior of the underground mine enhances productivity by improving key performance indicators (KPIs), minimizing accident risks, and promoting sustainable environmental conditions for mine operators. Finally, the adoption of IoT sensors and LoRaWAN wireless connectivity technologies provides information of the underground mine in real-time, which supports better decisions by the mining industry managers, by ensuring compliance with safety regulations, improving the productive performance, and fostering a roadmap towards more environmentally friendly labor conditions., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021–126405OBC32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. The financial support of the Research Department of the Catholic University of Temuco and the Civil Engineering Department of the University of Castilla-La Mancha is also appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Sustainability and digitalization in bridge management: how far we are?

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Sustainability and digitalization are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalization are very different in essence and, therefore, the tools needed for their fully adoption in the bridge management environment have to be also different in their basis and formulation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their actual level of sustainability and digitalization. It is shown that although in the technical aspects the final goals are not so far, the human factor (educational and organizational aspects) remains as the critical factor for a full and optimal implementation., The autor thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optimization of prestressing operations in the design of cable-stayed bridges by applying the Direct Algorithm

  • Farré Checa, Josep
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
A new direct simulation of the cantilever erection method is presented in order to reduce the prestressing operations of stay cables. This new method introduces a direct approach for cable-stayed bridge construction using the cantilever erection method, employing independent finite element models. Prestressing forces are modeled as imposed strains based on the unstressed length concept to ensure the achievement of a specific target state post-construction (objective service stage, OSS). This facilitates faster simulation of the construction process, particularly for steel bridges and the predesign of concrete cable-stayed bridges, and enables direct simulation of construction stages and OSS achievement. The proposed method's efficacy is demonstrated through the analysis of a cable-stayed bridge., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/ directed by Professor José Turmo. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bridge damage assessment under traffic and environmental variability: a case study on Yonghe cable-stayed bridge

  • Zunino, Leonardo|||0009-0007-5876-1151
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Domaneschi, Marco
Bridges are essential components of civil infrastructure that must operate safely and reliably. Traditional methods for assessing structural health rely on the concept that changes in a structure’s dynamic response may indicate potential damage. However, variations due to operational and environmental factors (like traffic and temperature) can also contribute to these changes. This makes damage detection more challenging, as a bridge may still be safe while exhibiting changes in its dynamic response due to these factors. If these effects are not properly accounted for, it could lead to false positive alerts. This article proposes a methodology for detecting and localizing damage in bridges subjected to traffic loads and environmental variability. Acceleration signals from accelerometers placed on the deck of a cable-stayed bridge in China were analyzed as part of a real monitoring effort. This data bank enabled the implementation of the algorithm on real signals in both undamaged and damaged scenarios. Variational Mode Decomposition is used to decompose the signal into Intrinsic Mode Functions. The Hilbert Transform is then employed to extract instantaneous frequencies, which represent damage-sensitive features in this context. Furthermore, environmental effects are removed from the damage-sensitive features using Principal Component Analysis. Finally, damage detection and localization are achieved using a statistical analysis able to confirm the previous data processing. An unsupervised clustering algorithm (K-means) is used to detect changes between the undamaged state and the damaged one. The results demonstrate the method’s effectiveness when applied to real-world scenarios, suggesting its potential application in structural health monitoring., The authors would like to express their sincere gratitude to Prof. Hui Li, Harbin Institute of Technology, for providing the data and images of the actual damage conditions of the Yonghe Bridge. Funding: This work was supported by MIUR - PRIN 2022 ‘‘BIORESTORE – BIO-based Resilient Energy and Seismic retrofiT Of the REsidential building stock’’ [Prot. 202234HM8J, CUP E53C24002680006]; and by MCIN/AEI - ‘‘ERDF A way of making Europe’’ [Grant PID2021- 126405OB-C31]. This publication is also part of the project PNRRNGEU which has received funding from the MUR – DM 629/2024., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

From sensing to action: a digital framework for bridge management

  • Zunino, Leonardo|||0009-0007-5876-1151
  • Gatteschi, Valentina
  • Villa, Valentina
  • Domaneschi, Marco
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
The continuous digitalization of bridge management is transforming how infra- structures are monitored, assessed, and maintained. Despite the availability of sensor data and AI-driven diagnostics, ensuring reliability, transparency, and traceability across the decision- making process remains challenging. This work presents a vision for an integrated, verifiable, and automated bridge management framework that links sensing, assessment, and intervention through emerging digital technologies. Advances in Artificial Intelligence and Machine Learn- ing enable data-driven Structural Health Monitoring for damage detection and quantification under varying conditions. When combined within a Digital Management Environment (DME) compliant with a Digital Twin (DT) framework, these tools support real-time condition assess- ment and predictive maintenance through interaction between physical and virtual assets. To ensure trust and accountability, blockchain is introduced as a tamper-proof layer for certifying data provenance and AI-based decisions. Smart contracts can automate maintenance workflows while preserving human oversight in safety-critical operations., This work was supported by MIUR - PRIN 2022 “BIO-RESTORE” [Prot. 202234HM8J, CUP E53C24002680006]; and it is part of the project “National Recovery and Resilience Plan-Next Generation EU” (PNRR-NGEU) which has received funding from the Italian Ministry of University and Research (MUR) - DM 629/2024. The support of PID2021- 126405OB-C31 and PID2022-140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Eigenfrequency analysis using fiber optic sensors and low-cost accelerometers for structural damage detection

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • González Jiménez, Manuel Antonio
  • Pérez Casas, José María
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural Health Monitoring (SHM) is crucial for infrastructure safety and integrity. Arduino-based sensors are gaining popularity in low-cost SHM structures. Distributed fiber optic systems (DFOS), such as Distributed Acoustic Sensing (DAS), are employed for accurate SHM despite their high costs, computational demands, and energy consumption. The primary objectives of this work are to compare the accuracy of an accelerometer named LARA (Low-cost Adaptable Reliable Accelerometer (LARA)) that utilizes both Arduino and Raspberry Pi technologies with a DAS system in detecting structural damage and to explore the potential advantages of combining LARA and DAS to create an effective SHM tool. This study is the first to enhance the design of LARA. Subsequently, LARA and DAS were used in a laboratory setting to analyze eigenfrequency changes in a beam model with induced localized damage. Finally, this study evaluated the precision and reliability of LARA and its potential role as a trigger for DAS in detecting localized damage. The findings show that both LARA and DAS can identify changes in the eigenfrequencies of damaged structures with deviations as small as 3.68 %. Consequently, LARA demonstrated its potential as a trigger for DAS, significantly reducing the computational demands while enriching the analysis. This approach offers highly accurate eigenfrequency measurements and enhances the analytical capabilities of DAS by identifying the primary axes of the detected eigenfrequencies., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021–126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. Dr. Seyedmilad Komarizadehasl is indebted to a grant provided by the Polytechnic University of Catalonia to encourage research among new teaching staff with a reference of ALECTORS-2023., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Temperature field simulation method and average temperature prediction on main cables of suspension bridges

  • Zou, Shuai
  • Ma, Haiying
  • Xia, Ye
  • Wei, Yushuo
  • Wang, Xinyi
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Zhang, Yanan
In order to reduce the construction error caused by the temperature effect during the construction of the main cable of the suspension bridge, this paper determines the key factors that cause the error through theoretical derivation. Through the accurate numerical simulation of the sunshine temperature field of the main cable, the quantitative analysis of the parameter influence of the average temperature error of the main cable section is carried out. According to the parameter fitting and generalization of the error quantization results, the average temperature correction model suitable for different diameter main cables is obtained. The results show that the average temperature correction model can greatly reduce the construction error caused by the temperature effect in the main cable construction project., The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (52478318); Natural Science Foundation of Shanghai (24ZR1469500); Fundamental Research Funds of the Central Universities (2023-2-YB-17); Spanish Ministry of Science and Innovation (PID2021-126405OB-C31)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Eigenfrequency analysis of bridges using a smartphone and a novel low-cost accelerometer prototype

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Xia, Ye
  • Komary, Mahyad|||0000-0002-3219-2970
  • Lozano Galant, Fidel|||0000-0001-9272-6172
The final authenticated version is available online at https://doi.org/10.1007/s11709-024-1055-5., Researchers are paying increasing attention to the development of low-cost and microcontroller-based accelerometers, in order to make structural health monitoring feasible for conventional bridges with limited monitoring budget. Parallel with the low-cost sensor development, the use of the embedded accelerometers of smartphones for eigenfrequency analysis of bridges is becoming popular in the civil engineering literature. This paper, for the first time in the literature, studies these two promising technologies by comparing the noise density and eigenfrequency analysis of a self-developed, validated and calibrated low-cost Internet of things based accelerometer LARA (low cost adaptable reliable accelerometer) with those of a state of the art smartphone (iPhone XR). The eigenfrequency analysis of a footbridge in San Sebastian, Spain, showed that the embedded accelerometer of the iPhone XR can measure the natural frequencies of the under study bridge., The paper is supported by the projects PID2021-126405OB-C31, funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, the National Natural Science Foundation of China (Grant Nos. 52278313 and 52411540031), the Project to Attract Foreign Experts (No. G2023133018L), and the Top Discipline Plan of Shanghai Universities—Class I., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Integrating web-based weather data into building information modeling models through robot process automation

  • Atencio, Edison
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Alfaro, Ignacio
  • Lozano Galant, José Antonio
  • Muñoz La Rivera, Felipe
The rapid evolution of digital technologies has revolutionized the architecture, engineering, and construction (AEC) industry, driving the wide-spread adoption of digital twins for structures. These virtual replicas, developed using Building Information Modeling (BIM) methodology, incorporate extensive information databases, proving indispensable for enhancing project management throughout a structure’s entire lifecycle and towards smart city development. As the impact of climate change continues to grow, hazardous weather alerts play a critical role as an early-warning system that notifies stakeholders of imminent threats, thereby influencing decision-making processes in construction projects. Surprisingly, despite its evident value, the integration of alert systems for hazardous weather conditions into BIM is often overlooked. To fill this gap, this paper proposes Robot Process Automation (RPA) protocols to automate the integration of real-time weather parameters into a structure’s BIM models. These very protocols are also used as alert systems, enabling the timely notification of stakeholders in the event of detected hazardous weather conditions. The effectiveness of the proposed methodology is demonstrated through its practical application in enhancing the safety of an actual building in Viña del Mar, Chile., This research was funded by FEDER, grant number PID2021-126405OB-C31 and PID2021- 126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Accuracy of Ground Penetrating Radar (GPR) in locating post-tensioned cables

  • Mazzatura, Isabella
  • Caprili, Silvia
  • Salvatore, Walter
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
The inspection and assessment of post-tensioned (PT) bridges is a complex issue, first involving the evaluation of the conservation status of the cables. One of the most crucial pieces of information to be confident with is the cables' location since it allows the success of all subsequent tests in the tendons (both non-destructive and destructive) and is critical in the bearing capacity of the beam in bending and shear as well. Many non-destructive techniques (NTDs) are studied and employed by the scientific community and practitioners for the cables' trace determination in PT beams; one of the most promising is the Ground Penetrating Radar (GPR). This technique is commonly employed in the location of metallic elements, both under the ground (pipes, utilities, etc.) and inside the concrete (reinforcements, ducts, etc.). The GPR technology exploits electromagnetic waves typically in the range of 1000-5000 MHz in the inspection of structures and tunnel lines. The variation of electromagnetic properties of the materials results in changes in the speed of travel, attenuation, and redirection of signals. The present research deals with the determination of the GPR accuracy in locating cables in PT structures. A laboratory testing campaign on specially designed samples was conducted for this aim. The tested walls contain both metallic and plastic ducts., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On-line damage detection in cables of cable-stayed bridges from ambient acceleration

  • Xu, Bin
  • Wu, Zirao
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
As critical load-bearing components of cable-stayed bridges, cables are essential for their safety. During service, cable tensions change over time due to external dynamic actions such as traffic, temperature, and wind, making it challenging to use cable tension for damage detection. In response, this paper proposes a method for both qualitative and quantitative damage identification of in-service cables based on the time-varying frequency, utilizing the dynamic stiffness theory. To obtain the frequency of in-service cables and remove the influence of traffic and temperature, a combination of the Block-wise Recursive Amplitude and Phase Estimation (BRAPES), Empirical Mode Decomposition (EMD), and Moving Average (MA) methods is employed. First, the cable frequency equation and inverse analysis characteristic function are established based on the dynamic stiffness theory. Then, a simulation method for time-varying frequencies of cables considering traffic loads and temperature effects is proposed based on the cable frequency equation. Using this simulated results, the MA-EMD-MA method for eliminating the influence of external dynamic actions from the time-varying frequencies is developed and validated with real bridge cable data. Finally, using the proposed simulation method, a K-Means Clustering-based qualitative damage identification method is presented, along with a quantitative damage identification strategy based on the cable inverse analysis characteristic function. Therefore, the cable damage identification strategy proposed based on these methods can be used for continuous and long-term real-time qualitative and quantitative identification of damage in in-service cables., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A systematic review of data fusion techniques for digital twin applications in the AEC sector: Perspectives for geotechnical engineering

  • Sotomayor Sotelo, Raúl
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
  • Domingo Tarancón, Magí|||0000-0002-5403-5204
  • Turmo Coderque, José|||0000-0001-5001-2438
The transformative role of Digital Twins (DTs) in the Architecture, Engineering, and Construction (AEC) sector lies in their capacity to generate dynamic, data-driven representations of physical assets that support design, construction, and lifecycle management. To achieve their full potential, DTs must integrate accurate geometric models with continuously updated information reflecting real-world conditions. This information is inherently multidisciplinary and heterogeneous, encompassing structural, environmental, operational, and monitoring data characterized by different spatial and temporal scales. Integrating these diverse datasets into a unified DT environment presents significant challenges related to data heterogeneity, interoperability, varying resolutions, data quality, and uncertainty. This paper presents a PRISMA-based systematic literature review of data fusion techniques applied to DTs within the AEC sector, with particular emphasis on geotechnical and underground infrastructure. A Scopus search conducted on 31 March 2026 retrieved 10,124 records. After sequential screening, 1916 geotechnical-related records were retained for quantitative characterization, 719 records were assessed for eligibility, 454 reports were retained for manual assessment, and 82 studies were finally included in the detailed qualitative review. Existing approaches are classified according to their integration paradigms, methodological foundations, and application domains. Particular attention is given to applications in Geotechnical Engineering, where DTs must integrate sparse, indirect, and highly uncertain subsurface data. Geological conditions are characterized by strong spatial variability, limited observability, material heterogeneity, and epistemic uncertainty, which introduce additional complexities for data fusion compared to surface infrastructure systems. By synthesizing current developments and identifying methodological trends and research gaps, this review provides a structured framework to support the selection and adaptation of data fusion strategies for geotechnical DTs and other complex AEC applications operating under high uncertainty., The authors are indebted to the projects PID2021-126405OB-C31, PID2021-126405OB-C32, PID2024-161115OB-C21 and PID2024-161115OB-C22 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. The Industrial PhD grant DIN2024-014159-2 awarded to Raúl Sotomayor is also appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Tošić, Nikola|||0000-0003-0242-8804
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Remote sensing in bridge digitalization: a review

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Chacón Flores, Rolando Antonio|||0000-0002-7259-5635
  • Catbas, Necati
  • Riveiro, Belén
  • Tonelli, Daniel
A review of the application of remote sensing technologies in the SHM and management of existing bridges is presented, showing their capabilities and advantages, as well as the main drawbacks when specifically applied to bridge assets. The main sensing technologies used as corresponding platforms are discussed. This is complemented by the presentation of five case studies emphasizing the wide field of application in several bridge typologies and the justification for the selection of the optimal techniques depending on the objectives of the monitoring and assessment of a particular bridge. The review shows the potentiality of remote sensing technologies in the decision-making process regarding optimal interventions in bridge management. The data gathered by them are the mandatory precursors for determining the relevant performance indicators needed for the quality control of these important infrastructure assets., Part of the research and case studies presented here was supported by the U.S. National Science Foundation (NSF) Division of Civil, Mechanical, and Manufacturing Innovation (Grant Number 1463493), Transportation Research Board of the National Academies-IDEA Project 222, and National Aeronautics and Space Administration (NASA) Award No. 80NSSC 20K0326, by the European Commission through the ASHVIN project: “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161 and by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The work has also received support from the MONITORED project, Ref. RED2022-134431-T funded by MCIN/AEI/10.13039/501100011033. This research was also financed by the European Union-Next Generation EU, Mission 4 Component 2-CUP E53D23003560006. The study presented was also carried out as part of the program of activities carried out as part of the agreement between the ReLUIS Interuniversity Consortium and the Superior Council of Public Works stipulated pursuant to art. 3 of the Decree of the Minister of Infrastructure no. 578 of 17 December 2020, and the agreement between the ReLUIS Interuniversity Consortium and the Italian Department of Civil Protection. COSMO-SkyMed products have been provided free of charge for research purposes by the Italian Space Agency, Project Card ID: 630 “SAR SHM of bridges”., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Extreme response scenarios for long-span bridges: probabilistic generation and interpretable clustering under free-flow and congested traffic

  • Wang, Xuejing
  • Ruan, Xin
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Zhang, Mingyang
  • Li, Yaohan
  • Zhou, Haijun
  • Dong, You
Due to extended influence lines and diverse vehicle compositions, the loading mechanisms of long-span bridges differ fundamentally from those of short- and medium-span bridges. Prior studies often ascribe extreme effects to congested traffic, assuming that vehicle density and interactions control peak responses. Recent observations, however, indicate that certain free-flow states, such as nighttime periods with higher truck percentages or clusters of heavy trucks, can also trigger comparable extreme responses. These findings challenge the notion of universal congestion dominance and motivate a reassessment of how both traffic states contribute to extremes. Moreover, many traffic studies rely on full-duration simulations, implicitly treating all time segments as equally contributory. In reality, only a small subset of extreme-response scenarios (block maxima) governs structural extremes, yet such scenarios are rarely isolated and compared across traffic states. Therefore, as a novelty, this study introduces a probabilistic approach that simulates only the governing extreme scenarios to rapidly produce a large number of relevant samples of maximum traffic effects. The differences in vehicle composition between free-flow and congested extreme scenarios are compared under the same return period. The results show that truck percentage and clustering are decisive drivers; specific free-flow conditions can yield extreme effects comparable to, and occasionally no lower than, those under congestion. In addition, while specifically focusing on extreme scenarios, the proposed methodology substantially reduces computational cost and time, while preserving daily maxima, thereby supporting the development of real-time structural monitoring and early-warning systems under diverse traffic conditions., The National Natural Science Foundations of China (Grant numbers 52078367, 52208197), the Academician Project Foundation of CCCC (Grant numbers: YSZX-01–2020–01-B), the Shenzhen Science and Technology program (Grant No. 20220811152251005) are gratefully acknowledged. The support given by Grant PID2021–126405OB-C31 and PID2022–140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged. The opinions and conclusions presented in this article are those of the authors and do not necessarily reflect the views of the sponsoring organizations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A comprehensive review and analysis of shear strengthening of RC beams with external prestressing bars

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Shen, Zhouhui
  • Xia, Ye
  • Amin, Al
  • Turmo Coderque, José|||0000-0001-5001-2438
Shear failure in reinforced concrete (RC) structures, characterized by their sudden and brittle nature, often results from inadequate shear reinforcement or degradation due to aging or increased loading demands. To increase shear capacity, various retrofitting techniques have been developed, with external prestressing bars recognized as an effective solution. These bars apply an active clamping force to improve shear resistance and delay the formation and propagation of diagonal cracks. This review presents a comprehensive analysis of experimental investigations and numerical models, such as strut-and-tie and damage-plasticity approaches, to evaluate shear strengthening with external prestressing bars. In this review, early exploratory studies, the evolution of experimental programs, and the development of analytical and finite element models for predicting the behavior of strengthened beams are examined. Particular attention is given to validating numerical models against experimental data, focusing on load-sharing mechanisms, ductility, failure modes, and serviceability. Practical design implications are evaluated, research gaps are identified, and recommendations for future studies are proposed to advance the implementation of this technique. Findings from authoritative sources are integrated to provide a definitive reference for researchers and engineers seeking sustainable and efficient shear retrofit solutions., The authors extend their sincere gratitude for the support provided by the National Natural Science Foundation of China (52278313, 52411540031) and the projects PID2021-126405OB-C31, funded by FEDER funds, A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Automatic assessment of the fatigue life of cables of cable-stayed bridges by on-line monitoring

  • Xu, Bin
  • Wu, Zirao
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
  • Dan, Danhui
This is the peer reviewed version of the following article: Xu B, Wu Z, Casas JR, Dan D. Automatic assessment of the fatigue life of cables of cable-stayed bridges by on-line monitoring. Structural Concrete. 2024. https://doi.org/10.1002/suco.202400609, which has been published in final form at https://doi.org/10.1002/suco.202400609. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., To accurately and timely evaluate the long-term performance of cables in cable-stayed bridges, an automatic perception technology scheme by on-line monitoring of cable vibrations is proposed for the fatigue damage evaluation of in-service cables. In the fatigue-stress amplitude of cables, the stress produced by tension changes caused by external actions like traffic, wind, and temperature is the main component. When cables vibrate significantly, the stress caused by changes in cable vibration-induced additional stress should not be neglected. Besides axial stress, bending stress is also significant in cable fatigue damage analysis. To make cable fatigue life prediction closer to real engineering scenarios, this factor should be considered. First, based on the cable dynamic stiffness theory, a method is proposed for the automatic gathering of the actual full-stress time history of a cable by on-line vibration monitoring. Furthermore, based on Miner's linear fatigue damage accumulation theory, an automatic fatigue life assessment method is proposed and applied to the vibration monitoring data of cables on an operational bridge. The results indicate that the proposed technology realizes automatic on-line monitoring of cable forces and fatigue assessment of cables. Through statistical analysis of cable fatigue stress amplitude, it was determined that in cable-stayed bridges, compared to long cables, short cables are more sensitive to external variable loads, typically experiencing larger and more frequent tension changes, and are more prone to fatigue. Therefore, short cables should be given more attention when analyzing cable fatigue in cable-stayed bridges., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development and validation of a novel IoT-enabled electrical resistance system for non-destructive monitoring of atmospheric corrosion in steel structures

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Tošić, Nikola|||0000-0003-0242-8804
  • Turmo Coderque, José|||0000-0001-5001-2438
Effective corrosion monitoring in steel structures is crucial for sustainability and safety. Traditional electrochemical techniques, while common, are complex, require technician presence, and often lack accuracy in on-site quantification of corrosion rates and metal thickness loss. Additionally, these systems are costly, typically restricting their use to high-budget Structural Health Monitoring (SHM) projects and leaving conventional structures, such as steel bridges, without adequate monitoring. To address this gap, this paper introduces LEROY (Low-cost Electrical Resistance Ohm Analyzer), an Arduino-based, Internet of Things (IoT)-enabled device designed as a low-cost Data Acquisition (DAQ) system for atmospheric corrosion monitoring (ACM) of steel structures. LEROY achieves high resolution in the milliohm range and stable electrical resistance (ER) measurements, providing a novel solution for non-destructive testing (NDT). Validated through tests on known resistors and steel samples (AISI 304HN and AISI 1010), LEROY demonstrated high accuracy, with a maximum relative difference of 0.59% compared to a commercial resistance meter. A six-month accelerated corrosion test further confirmed its ability to track corrosion progression in metal thickness loss and provide real-time updates on relative corrosion rates. Combining wireless data streaming with affordability, LEROY supports SHM applications in budget-constrained infrastructure projects, enhancing the maintenance and safety of steel structures., The authors are indebted to the projects PID2021- 126405OB-C31 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Traffic-informed proof load testing without prior resistance information

  • Addonizio, Gianmarco|||0000-0002-9960-4546
  • Losanno, Daniele
  • Lantsoght, Eva O.L.
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Proof load testing (PLT) can be an effective means to proof the load-carrying capacity and structural reliability of existing bridges even when no or weak prior information on structural resistance is available. However, both the design and the interpretation of a successful PLT strongly depend on how the effects of actual traffic loads are modelled. This paper presents a reliability-based methodology for integrating Weigh-In-Motion (WIM) traffic data into PLT design through simplified probabilistic formulations. The resulting reliability-based PLT design charts directly relate the target proof load level to the prescribed target reliability. The proposed framework can be applied both to the design of dedicated proof load tests and to the interpretation of documented traffic loading histories, including permit load events., This study was developed within the CSLLP-ReLUIS project, funded by the Italian High Council of Public Works. The support of PID2021-126405OB-C31 and PID2022-140178OB- I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An innovative drive-through approach for structural testing and experimental insights from two cable stayed bridges

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Shen, Zhouhui
  • Xia, Ye
  • Song, Mingming
  • Turmo Coderque, José|||0000-0001-5001-2438
Effective monitoring of bridge infrastructure is essential for ensuring safety, reliability, and longevity. Traditional Structural Health Monitoring (SHM) methods have been challenged by installation complexity, maintenance demands, and high costs, particularly in large-scale or long-span bridges. In response, a novel, non-intrusive drive-through method for extracting bridge eigenfrequencies has been developed using vehicle-multi-mounted Micro-Electro-Mechanical Systems (MEMS) sensors. A passing vehicle is thereby converted into a mobile sensing platform, and bridge dynamic properties are captured under normal traffic conditions. Experimental validation was conducted on Shanghai's Yangpu and Nanpu cable-stayed bridges, and eigenfrequency extraction from a single crossing was demonstrated, significantly reducing the need for multiple passes. The signal-to-noise ratio was improved by the fusion of data from multiple sensors, and frequency identification was achieved. A practical and cost-effective solution for large-scale bridge monitoring is thus offered, and further work is planned to extend the methodology to additional structural parameters and enhanced robustness., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing performance evaluation of low-cost inclinometers for the long-term monitoring of buildings

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • González-Arteaga, Jesús
  • Xia, Ye
The development of low-cost structural and environmental sensors has revolutionized monitoring practices across numerous fields, enabling cost-effective solutions for infrastructure and building health assessment. However, a critical challenge associated with these sensors is their long-term durability and reliability. Surprisingly, despite the significant interest in these low-cost devices, the literature does not present any solutions for ensuring their long-term performance. To address this gap, this study proposes an innovative artificial intelligence-based approach for evaluating the long-term performance of low-cost inclinometers using a low-cost adaptable reliable anglemeter. This method automatically compares the inclinations of actual onsite measurements with predicted values under real environmental conditions. Over time, if the discrepancies between both measurements surpass a predefined statistical threshold, it may signal potential inaccuracies in the low-cost inclinometer, thereby suggesting the need for recalibration or presence of structural anomalies. The effectiveness and applicability of the proposed tool were demonstrated through a long-term study conducted on a real steel frame in Spain., This work was supported by the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds through the program “A Way to Make Europe” and by the Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. It also received support from the National Natural Science Foundation of China (Grant No. 52278313)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Frequency identification of non-beam bridges using vehicle scanning methods: Analytical formulation and experimental validation

  • Erduran, Emrah
  • Gönen, Semih|||0000-0002-9588-4552
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Xia, Ye
This article presents a novel analytical formulation that demonstrates how the natural vibration frequencies of any bridge - regardless of its structural type, geometry, or boundary conditions - can be identified from the vibrations recorded by an instrumented vehicle crossing the bridge. This formulation broadens the scope of vehicle scanning methods for bridge frequency identification by removing the traditional assumption of sinusoidal mode shapes, which previously limited their application to simply supported beam bridges. The methodology begins by expanding bridge vibrations using a Fourier series, demonstrating that only the natural frequencies of the bridge contribute nonzero terms to this expansion. This is universally applicable, independent of bridge typology and geometry. Using Duhamel’s integral, the response of a vehicle traversing the bridge was computed to analytically prove that the bridge’s natural frequencies appear in the vehicle’s vibration spectrum. To validate the formulation, we present two applications. First, a numerical study models an 80¿m steel arch bridge, confirming its non-sinusoidal mode shapes through eigenvalue analysis. A virtual vehicle crossing simulation reveals that the bridge’s natural frequencies are clearly identifiable in the Fourier amplitude spectrum (FAS) of the vehicle vibrations. Second, a field test is conducted on a 602¿m cable-stayed bridge using an instrumented vehicle equipped with low-cost roof-mounted accelerometers. The first three modal frequencies of the bridge are successfully extracted from the vehicle’s recorded vibrations, demonstrating the practical feasibility of the developed formulation in real-world conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Long-term performance evaluation of low-cost sensors using AI-driven tools

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
In civil engineering and architectural applications, Micro Electro-Mechanical System (MEMS) accelerometer-based inclinometers are widely used due to their costeffectiveness. However, a major challenge associated with these devices is their long-term durability and reliability. Typically, commercial inclinometers are employed to calibrate low-cost solutions over time, which ultimately increases monitoring costs and significantly reduces their economic advantages. To address this limitation, this paper presents a novel approach based on Artificial Intelligence (AI) to evaluate the long-term performance of the low-cost inclinometer called LARA (Low-Cost Adaptable Reliable Anglemeter). This AI-driven tool utilizes a Multilayer Perceptron to predict the inclination of a monitored steel structure under real environmental conditions. By comparing the predicted results with actual on-site measurements, potential inaccuracies in the low-cost inclinometer can be automatically detected, indicating the need for recalibration. The effectiveness and applicability of the proposed tool are demonstrated through a study conducted on a real steel frame located in Spain. This study demonstrates how the AI-based approach can enhance the assessment of the low-cost inclinometer’s performance and its suitability for long-term monitoring of real structures., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OBC32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and National Natural Science Foundation of China (52278313).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observing material properties in composite structures from actual rotations

  • Emadi, Seyyedbehrad
  • Sun, Yuan
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The shear deflection effects are traditionally neglected in most structural system identification methods. Unfortunately, this assumption might lead to significant errors in some structures, like deep beams. Although some inverse analysis methods based on the stiffness matrix method, including shear deformation effects, have been presented in the literature, none of these methods are able to deal with actual rotations in their formulations. Recently, the observability techniques, one of the first methods for the inverse analysis of structures, included the shear effects into the system of equations. In this approach, the effects of the shear rotation are neglected. When actual rotations on-site are used to estimate the mechanical properties in the inverse analysis, it can result in serious errors in the observed properties. This characteristic might be especially problematic in structures such as deep beams where only rotations can be measured. To solve this problem and increase the observability techniques’ applicability, this paper proposes a new approach to include the shear rotations into the inverse analysis by observability techniques. This modification is based on the introduction of a new iterative process. To illustrate the applicability and potential of the proposed method, the inverse analysis of several examples of growing complexity is presented., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and the National Natural Science Foundation of China (52278308) directed by Yuan Sun., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observability analysis for structural system identification based on static-state estimation

  • Alahmad, Ahmad|||0000-0002-6127-1897
  • Mínguez, Roberto
  • Porras Soriano, Rocío
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The concept of observability analysis has garnered substantial attention in the field of structural system identification. Its primary aim is to identify a specific set of structural characteristics, such as Young’s modulus, area, inertia, and possibly their combinations (e.g., flexural or axial stiffness). These characteristics can be uniquely determined when provided with a suitable subset of deflections, forces, and/or moments at the nodes of the structure. This problem is particularly intricate within the realm of structural system identification, mainly due to the presence of nonlinear unknown variables, such as the product of vertical deflection and flexural stiffness, in accordance with modern methodologies. Consequently, the mechanical and geometrical properties of the structure are intricately linked with node deflections and/or rotations. The paper at hand serves a dual purpose: firstly, it introduces the concept of static-state estimation, especially tailored for the identification of structural systems; and secondly, it presents a novel observability analysis method grounded in static-state estimation principles, designed to overcome the aforementioned challenges. Computational experiments shed light on the algorithm’s potential for practical structural system identification applications, demonstrating significant advantages over the existing state-of-the-art methods found in the literature. It is noteworthy that these advantages could potentially be further amplified by addressing the static-state estimation principles problem, which constitutes a subject for future research. Solving this problem would help address the additional challenge of developing efficient techniques that can accommodate redundancy and uncertainty when estimating the current state of the structure., The authors would like to express their gratitude for thefunding provided by the following projects: ProjectPID2021-126405OB-C31: “Development of low-cost mod-ular sensors for use in the structural identifcation of bridgessubjected to quasi-static loads.” Project PID2021-126405OB-C32: “Alarm system for bridge management systems withBIM digital twins using artifcial intelligence.” Tese projectshave been generously funded by MICIN (Ministry of Scienceand Innovation), AEI (State Research Agency), and the “Away to make Europe” FEDER Funds. Dr. Mínguez’s researchwas supported by project “SENSEI: Smart watEr NetworkSusing artifcial intEllIgence” with code CNS2022-135472,funded by MCIN/AEI/10.13039/501100011033 and by theEuropean Union Next Generation EU/PRTR, and R&Dproject “Algorithms for Stochastic Optimization UsingData-driven and Learning Analysis (ASTRAL)” with codePID2023-151013NB-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union Next GenerationEU/PRTR. Finally, scholarship funding was obtained fromL’Agència de Gestió d’Ajuts Universitaris i de Recerca(AGAUR) through the “Ajuts de suport a departaments iunitats de recerca universitaris per a la contractació depersonal investigador predoctoral en formació (FI SDUR2022).”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Cost-effective bridge health monitoring via automated operational modal analysis using low-cost adaptable and reliable accelerometers

  • Delgado Zhagui, Erika Beatriz
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Torralba Mendiola, Víctor
  • Díaz Rozo, Javier
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural Health Monitoring (SHM) is gaining traction as a crucial tool to ensure the safety and longevity of vital infrastructure. However, high costs of industrial-grade sensors create significant barriers to widespread implementation, especially in financially constrained projects. To overcome these challenges, this paper introduces the Low-cost Adaptable Reliable Accelerometer (LARA) as a feasible alternative for SHM, offering a significant reduction in financial burden without compromising performance. The study evaluates LARA capabilities through a comparative analysis with a traditional commercial accelerometer (PCB 607A61) during an experimental campaign on the Andoain Road Bridge. Key aspects investigated include noise density, internet-based data synchronisation, and experimental applications for determining the bridge’s dynamic characteristics. An automated Operational Modal Analysis (OMA) procedure, integrating data acquisition and modal computation using LARA, was developed to streamline SHM. Results demonstrated that LARA closely matches commercial accelerometers in accuracy, with minimal discrepancies in eigenfrequencies and high Modal Assurance Criterion (MAC) values. The data were further used to calibrate a finite element model (FEM) of the bridge, which closely aligned with experimental modal properties. The findings confirm that LARA is a reliable, cost-effective solution for SHM, providing performance comparable to commercial sensors and enabling accessible model calibration for improved structural analysis., The authors are indebted to the project PID2021-126405OB-C31 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness (MICIN/AEI/10.13039/ 501100011033/). The authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain, for the funding provided through Agaur (2021 DI 081). It is also to be noted that funding for this research has been provided for Erika Delgado by the Spanish Agencia Estatal de Investigacion del Ministerio de Ciencia Innovacion y Universidades Grant (DIN2021- 012035)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental and numerical studies on shear failure behavior variability in RC beams without shear reinforcement

  • Zhu, Jinggao
  • Li, Shengtao
  • Sun, Yangyang
  • Li, Peng
  • Chen, Xudong
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
© <2025> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reinforced concrete (RC) beams without stirrups are known to exhibit significant variability in shear failure behavior. In the present study, this variability is experimentally reproduced through non-destructive testing, revealing up to a 65% difference in shear failure loads and providing high-quality data for detailed analysis. Based on the test data, advanced diagnostic techniques—Digital Image Correlation (DIC) and Distributed Fiber Optic Sensing (DFOS)—are employed to explore the underlying causes, discovering that the observed variability is closely linked to differences in shear crack angles. To validate this finding, an enhanced bond-based peridynamic (PD) model incorporating anisotropy is developed, with improved capability in simulating crack propagation with varying orientations. The model accurately reproduces the load–displacement responses, crack patterns, and reinforcement strain distributions for both low- and high-capacity specimens, demonstrating its effectiveness. The validated model is further used to investigate the relationship between the critical shear crack angle and shear failure load, revealing a clear negative correlation. The study contributes to a deeper understanding of the mechanisms underlying shear failure variability and support the development of effective numerical tools for RC beam design., Acknowledged financial supports include the National Key R&D Program of China (Grant No. 2021YFB2600200), the Science and Technology Project of POWERCHINA Ltd. (Grant No. DJ-HXGG-2024-06; DJ-ZDZX-2023-01) and the Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sustainability and digitalisation in bridge management: present and future

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Sustainability and digitalisation are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalisation are very different in essence. The former is a societal need, while the later is just a tool. Therefore, the correct approach for their fully adoption in the bridge management environment has to be also different in their basis, formulation and implementation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their current level of sustainability and digitalisation and what are the future steps to follow to achieve an optimal situation. It is shown that although in the technical aspects the goals are not so far, the human factor (educational and organisational aspects) remains as the critical factor for a full and optimal implementation., The author thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Application of intelligent low-cost accelerometers for bridge monitoring with a deep learning approach

  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Xia, Ye
Despite the crucial role of structural health monitoring (SHM) in ensuring the integrity and safety of essential infrastructure, its adoption is often limited by the high costs of traditional sensors. This study introduces an innovative approach for creating intelligent, high-performing low-cost accelerometers using a deep learning framework rooted in long short–term memory (LSTM) neural networks. Initially, commercial sensors are temporarily installed alongside low-cost accelerometers on a bridge to facilitate the training process. Once the training is complete, the commercial sensors are removed, leaving the calibrated low-cost accelerometers permanently in place to perform continuous SHM tasks. In a case study, a bridge was equipped with an array of six low-cost and six commercial sensors. The efficacy of this innovative approach is corroborated through a comparative analysis of mode shapes and eigenfrequencies derived from both the low-cost and commercial sensors, as well as intelligent low-cost accelerometers., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Temperature field simulation method and average temperature prediction on main cables of suspension bridges

  • Zou, Shuai
  • Ma, Haiying
  • Xia, Ye
  • Wei, Yushuo
  • Wang, Xinyi
  • Komarizadehasl, Seyedmilad
  • Zhang, Yanan
In order to reduce the construction error caused by the temperature effect during the construction of the main cable of the suspension bridge, this paper determines the key factors that cause the error through theoretical derivation. Through the accurate numerical simulation of the sunshine temperature field of the main cable, the quantitative analysis of the parameter influence of the average temperature error of the main cable section is carried out. According to the parameter fitting and generalization of the error quantization results, the average temperature correction model suitable for different diameter main cables is obtained. The results show that the average temperature correction model can greatly reduce the construction error caused by the temperature effect in the main cable construction project., The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (52478318); Natural Science Foundation of Shanghai (24ZR1469500); Fundamental Research Funds of the Central Universities (2023-2-YB-17); Spanish Ministry of Science and Innovation (PID2021-126405OB-C31)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Sustainability and digitalization in bridge management: how far we are?

  • Casas Rius, Joan Ramon
Sustainability and digitalization are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalization are very different in essence and, therefore, the tools needed for their fully adoption in the bridge management environment have to be also different in their basis and formulation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their actual level of sustainability and digitalization. It is shown that although in the technical aspects the final goals are not so far, the human factor (educational and organizational aspects) remains as the critical factor for a full and optimal implementation., The autor thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic behaviour of double-cable systems connected by a rigid cross-tie in long-span cable-supported bridges: a unified approach

  • Zhu, Xiaoqing
  • Zang, Chen
  • Xu, Bin
  • Li, Shengli
  • Casas Rius, Joan Ramon
Installing cross-ties between adjacent cables in cable-supported bridges are an effective vibration suppression measure. For a double-cable system connected by a rigid cross-tie (DCS_RCT), this article establishes a generalised dynamic model that comprehensively considers the cross-tie location, cable bending stiffness, sag, tension, inclination angle and mass per unit length. Then, a frequency equation for solving the dynamic characteristics of the system is developed, and its accuracy is verified by comparing to the results reported in the literature for symmetric systems and a numerical simulation model for asymmetric systems. As a parametric model, the proposed frequency equation can be used conveniently in the design of DCS_RCT. Finally, the effects of the cross-tie location, cable length, bending stiffness, tension, mass per unit length, and inclination angle on the dynamic characteristics of DCS_RCT are analysed. The novelty lies in the refined generalised dynamic model for DCS_RCT in cable-stayed and suspension bridges. The frequency equation reveals two distinct frequency modes and quantifies the opposite sensitivity of crossover cable positions in symmetric and asymmetric systems, providing a novel framework for cable vibration suppression. These findings advance the understanding of the DCS_RCT mechanism and offer direct guidance for optimising vibration control in multi-cable bridge systems., The work was supported by the National Natural Science Foundation of China under Grant No. 52108290; the China Postdoctoral Science Foundation under Grant No. 2022 M712906; the Key Scientific and Technological Research Projects of Henan Province under Grant No.212102310975, 222102320436. The support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ‘ERDF A way of making Europe’ is also acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the failure process of large shear key joints based on NDT methods

  • Li, Shengtao
  • Casas Rius, Joan Ramon
  • Chen, Xudong
  • Sun, Yangyang
  • Liu, Duo
Dry joints with keys are often used in precast concrete segmental bridges (PCSBs) to transfer shear stresses. Large dry joints with keys can often provide greater shear bearing capacity, which can meet the needs of rapid construction and simple assembly. This study focuses on the shear response of super-sized dry joints with keys under direct shear. Various monitoring methods, including digital image correlation (DIC) and distributed optical fiber sensing (DFOS), were used to systematically study the stress process of large concrete keys. The results show that as the size of the key teeth increases, the shear bearing capacity and ultimate vertical displacement of the specimens also increase. DIC and DFOS techniques provide detailed information on key tooth failure, which is beneficial for subsequent stress analysis of shear keys., The authors acknowledge the support provided by the Spanish Ministry of Science and Innovation through the research project PID2021-126405OB-C31 and AGAUR (Government of Catalonia) for support to consolidated re-search groups, and CSC scholarship of China (202206710009)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Tošić, Nikola
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An innovative drive-through approach for structural testing and experimental insights from two cable stayed bridges

  • Komarizadehasl, Seyedmilad
  • Shen, Zhouhui
  • Xia, Ye
  • Song, Mingming
  • Turmo Coderque, José
Effective monitoring of bridge infrastructure is essential for ensuring safety, reliability, and longevity. Traditional Structural Health Monitoring (SHM) methods have been challenged by installation complexity, maintenance demands, and high costs, particularly in large-scale or long-span bridges. In response, a novel, non-intrusive drive-through method for extracting bridge eigenfrequencies has been developed using vehicle-multi-mounted Micro-Electro-Mechanical Systems (MEMS) sensors. A passing vehicle is thereby converted into a mobile sensing platform, and bridge dynamic properties are captured under normal traffic conditions. Experimental validation was conducted on Shanghai's Yangpu and Nanpu cable-stayed bridges, and eigenfrequency extraction from a single crossing was demonstrated, significantly reducing the need for multiple passes. The signal-to-noise ratio was improved by the fusion of data from multiple sensors, and frequency identification was achieved. A practical and cost-effective solution for large-scale bridge monitoring is thus offered, and further work is planned to extend the methodology to additional structural parameters and enhanced robustness., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

From sensing to action: a digital framework for bridge management

  • Zunino, Leonardo
  • Gatteschi, Valentina
  • Villa, Valentina
  • Domaneschi, Marco
  • Casas Rius, Joan Ramon
The continuous digitalization of bridge management is transforming how infra- structures are monitored, assessed, and maintained. Despite the availability of sensor data and AI-driven diagnostics, ensuring reliability, transparency, and traceability across the decision- making process remains challenging. This work presents a vision for an integrated, verifiable, and automated bridge management framework that links sensing, assessment, and intervention through emerging digital technologies. Advances in Artificial Intelligence and Machine Learn- ing enable data-driven Structural Health Monitoring for damage detection and quantification under varying conditions. When combined within a Digital Management Environment (DME) compliant with a Digital Twin (DT) framework, these tools support real-time condition assess- ment and predictive maintenance through interaction between physical and virtual assets. To ensure trust and accountability, blockchain is introduced as a tamper-proof layer for certifying data provenance and AI-based decisions. Smart contracts can automate maintenance workflows while preserving human oversight in safety-critical operations., This work was supported by MIUR - PRIN 2022 “BIO-RESTORE” [Prot. 202234HM8J, CUP E53C24002680006]; and it is part of the project “National Recovery and Resilience Plan-Next Generation EU” (PNRR-NGEU) which has received funding from the Italian Ministry of University and Research (MUR) - DM 629/2024. The support of PID2021- 126405OB-C31 and PID2022-140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability and digitalisation in bridge management: present and future

  • Casas Rius, Joan Ramon
Sustainability and digitalisation are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalisation are very different in essence. The former is a societal need, while the later is just a tool. Therefore, the correct approach for their fully adoption in the bridge management environment has to be also different in their basis, formulation and implementation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their current level of sustainability and digitalisation and what are the future steps to follow to achieve an optimal situation. It is shown that although in the technical aspects the goals are not so far, the human factor (educational and organisational aspects) remains as the critical factor for a full and optimal implementation., The author thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On-line damage detection in cables of cable-stayed bridges from ambient acceleration

  • Xu, Bin
  • Wu, Zirao
  • Casas Rius, Joan Ramon
As critical load-bearing components of cable-stayed bridges, cables are essential for their safety. During service, cable tensions change over time due to external dynamic actions such as traffic, temperature, and wind, making it challenging to use cable tension for damage detection. In response, this paper proposes a method for both qualitative and quantitative damage identification of in-service cables based on the time-varying frequency, utilizing the dynamic stiffness theory. To obtain the frequency of in-service cables and remove the influence of traffic and temperature, a combination of the Block-wise Recursive Amplitude and Phase Estimation (BRAPES), Empirical Mode Decomposition (EMD), and Moving Average (MA) methods is employed. First, the cable frequency equation and inverse analysis characteristic function are established based on the dynamic stiffness theory. Then, a simulation method for time-varying frequencies of cables considering traffic loads and temperature effects is proposed based on the cable frequency equation. Using this simulated results, the MA-EMD-MA method for eliminating the influence of external dynamic actions from the time-varying frequencies is developed and validated with real bridge cable data. Finally, using the proposed simulation method, a K-Means Clustering-based qualitative damage identification method is presented, along with a quantitative damage identification strategy based on the cable inverse analysis characteristic function. Therefore, the cable damage identification strategy proposed based on these methods can be used for continuous and long-term real-time qualitative and quantitative identification of damage in in-service cables., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing the accuracy of low-cost inclinometers with artificial intelligence

  • Lozano Galant, Fidel
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad
  • González-Arteaga, Jesús
  • Xia, Ye
The development of low-cost structural and environmental sensors has sparked a transformation across numerous fields, offering cost-effective solutions for monitoring infrastructures and buildings. However, the affordability of these solutions often comes at the expense of accuracy. To enhance precision, the LARA (Low-cost Adaptable Reliable Anglemeter) system averaged the measurements of a set of five different accelerometers working as inclinometers. However, it is worth noting that LARA’s sensitivity still falls considerably short of that achieved by other high-accuracy commercial solutions. There are no works presented in the literature to enhance the accuracy, precision, and resolution of low-cost inclinometers using artificial intelligence (AI) tools for measuring structural deformation. To fill these gaps, artificial intelligence (AI) techniques are used to elevate the precision of the LARA system working as an inclinometer. The proposed AI-driven tool uses Multilayer Perceptron (MLP) to glean insight from high-accuracy devices’ responses. The efficacy and practicality of the proposed tools are substantiated through the structural and environmental monitoring of a real steel frame located in Cuenca, Spain., This research was funded by FEDER, grant number PID2021-126405OB-C31 and PID2021-126405OB-C32—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, National Natural Science Foundation of China (52278313), and a grant provided by the Polytechnic University of Catalonia with a reference of ALECTORS-2023., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observing material properties in composite structures from actual rotations

  • Emadi, Seyyedbehrad
  • Sun, Yuan
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The shear deflection effects are traditionally neglected in most structural system identification methods. Unfortunately, this assumption might lead to significant errors in some structures, like deep beams. Although some inverse analysis methods based on the stiffness matrix method, including shear deformation effects, have been presented in the literature, none of these methods are able to deal with actual rotations in their formulations. Recently, the observability techniques, one of the first methods for the inverse analysis of structures, included the shear effects into the system of equations. In this approach, the effects of the shear rotation are neglected. When actual rotations on-site are used to estimate the mechanical properties in the inverse analysis, it can result in serious errors in the observed properties. This characteristic might be especially problematic in structures such as deep beams where only rotations can be measured. To solve this problem and increase the observability techniques’ applicability, this paper proposes a new approach to include the shear rotations into the inverse analysis by observability techniques. This modification is based on the introduction of a new iterative process. To illustrate the applicability and potential of the proposed method, the inverse analysis of several examples of growing complexity is presented., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and the National Natural Science Foundation of China (52278308) directed by Yuan Sun., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observability analysis for structural system identification based on static-state estimation

  • Alahmad, Ahmad
  • Mínguez, Roberto
  • Porras Soriano, Rocío
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The concept of observability analysis has garnered substantial attention in the field of structural system identification. Its primary aim is to identify a specific set of structural characteristics, such as Young’s modulus, area, inertia, and possibly their combinations (e.g., flexural or axial stiffness). These characteristics can be uniquely determined when provided with a suitable subset of deflections, forces, and/or moments at the nodes of the structure. This problem is particularly intricate within the realm of structural system identification, mainly due to the presence of nonlinear unknown variables, such as the product of vertical deflection and flexural stiffness, in accordance with modern methodologies. Consequently, the mechanical and geometrical properties of the structure are intricately linked with node deflections and/or rotations. The paper at hand serves a dual purpose: firstly, it introduces the concept of static-state estimation, especially tailored for the identification of structural systems; and secondly, it presents a novel observability analysis method grounded in static-state estimation principles, designed to overcome the aforementioned challenges. Computational experiments shed light on the algorithm’s potential for practical structural system identification applications, demonstrating significant advantages over the existing state-of-the-art methods found in the literature. It is noteworthy that these advantages could potentially be further amplified by addressing the static-state estimation principles problem, which constitutes a subject for future research. Solving this problem would help address the additional challenge of developing efficient techniques that can accommodate redundancy and uncertainty when estimating the current state of the structure., The authors would like to express their gratitude for thefunding provided by the following projects: ProjectPID2021-126405OB-C31: “Development of low-cost mod-ular sensors for use in the structural identifcation of bridgessubjected to quasi-static loads.” Project PID2021-126405OB-C32: “Alarm system for bridge management systems withBIM digital twins using artifcial intelligence.” Tese projectshave been generously funded by MICIN (Ministry of Scienceand Innovation), AEI (State Research Agency), and the “Away to make Europe” FEDER Funds. Dr. Mínguez’s researchwas supported by project “SENSEI: Smart watEr NetworkSusing artifcial intEllIgence” with code CNS2022-135472,funded by MCIN/AEI/10.13039/501100011033 and by theEuropean Union Next Generation EU/PRTR, and R&Dproject “Algorithms for Stochastic Optimization UsingData-driven and Learning Analysis (ASTRAL)” with codePID2023-151013NB-I00, funded by MCIN/AEI/10.13039/501100011033 and the European Union Next GenerationEU/PRTR. Finally, scholarship funding was obtained fromL’Agència de Gestió d’Ajuts Universitaris i de Recerca(AGAUR) through the “Ajuts de suport a departaments iunitats de recerca universitaris per a la contractació depersonal investigador predoctoral en formació (FI SDUR2022).”, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Residual service life of a deteriorated retaining wall near the Terrassa railway station based on evidence

  • Casas Rius, Joan Ramon
  • Alegre Heitzmann, Vicente
  • Comellas Oliva, Josep
A part of the retaining earth wall of the main line of the Catalonian railways (FGC), close to the station of Terrassa collapsed abruptly and without any previous warning. The collapse of this part of the wall provoked the disruption of the operation of trains for three days due to the difficulties in the debris removal. The re-construction of the wall lasted several months. After investigation, it became evident that the failure was due to the pit corrosion of the main reinforcement due to the leakage of a pipeline containing water with chlorides (drinking water network). From the results of the investigation, the main parameters related to the durability of the concrete in the wall were deduced. Once the failed section of the wall was refurbished, it was possible the inspection of the condition state of the reinforce-ment mainly in the rest of the wall (around 100 meters), removing extrados land. The assessment of the actual state and remaining service life of the rest of the retaining earth wall was carried out based on the different behaviour of each part, due to the different leakage in relation to the failed section. Based on this evidence, the residual service life of the rest of the wall was estimated as adequate during the remaining years of railway operation, The second author acknowledges the financial support provided by the Spanish Ministry of Science and Innovation through the research project PID2021-126405OB-C31 and AGAUR (Government of Catalonia) for the support to consolidated research groups., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Automatic calibration of structural BIM models applied to bridges

  • Lozano Galant, Fidel
  • Atencio, Edison
  • Tošić, Nikola
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
Building Information Modeling (BIM) enables the creation of digital twins that simulate physical assets like buildings and infrastructure. Achieving an accurate representation of the true structural behavior necessitates calibrating the properties of these virtual models using real on-site measurements. The calibration process holds particular significance for the federated structural model, as on-site damages can potentially compromise crucial mechanical attributes, jeopardizing the asset’s safety and integrity. Although Structural System Identification (SSI) methods can derive actual parameters from on-site measurements, integrating these calibrated properties into BIM models poses challenges. Typically, the calibration process involves manual operations, such as modifying predefined structural databases and updating properties for damaged elements. This manual approach introduces complexities and potential inaccuracies. This paper proposes a novel approach using Robot Process Automation (RPA) to automate the calibration of BIM structural models. The proposed RPA tool automates the generation of new sections in the structural database and the assignment of updated mechanical properties to damaged elements. By leveraging RPA, the integration of SSI results into BIM models can be significantly enhanced, improving interoperability between architectural and structural federated models. Furthermore, this automation supports informed decision-making in structural assessment and maintenance. To validate the proposed tool, a case study is presented involving the calibration of mechanical properties in a real steel bridge. Autodesk software, including Revit and Robot Structural Analysis, is utilized in this case study. The findings demonstrate the effectiveness and potential benefits of the proposed RPA tool in streamlining the calibration process and ensuring the accuracy of BIM structural models., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OBC32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development and validation of a novel IoT-enabled electrical resistance system for non-destructive monitoring of atmospheric corrosion in steel structures

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Tošić, Nikola
  • Turmo Coderque, José
Effective corrosion monitoring in steel structures is crucial for sustainability and safety. Traditional electrochemical techniques, while common, are complex, require technician presence, and often lack accuracy in on-site quantification of corrosion rates and metal thickness loss. Additionally, these systems are costly, typically restricting their use to high-budget Structural Health Monitoring (SHM) projects and leaving conventional structures, such as steel bridges, without adequate monitoring. To address this gap, this paper introduces LEROY (Low-cost Electrical Resistance Ohm Analyzer), an Arduino-based, Internet of Things (IoT)-enabled device designed as a low-cost Data Acquisition (DAQ) system for atmospheric corrosion monitoring (ACM) of steel structures. LEROY achieves high resolution in the milliohm range and stable electrical resistance (ER) measurements, providing a novel solution for non-destructive testing (NDT). Validated through tests on known resistors and steel samples (AISI 304HN and AISI 1010), LEROY demonstrated high accuracy, with a maximum relative difference of 0.59% compared to a commercial resistance meter. A six-month accelerated corrosion test further confirmed its ability to track corrosion progression in metal thickness loss and provide real-time updates on relative corrosion rates. Combining wireless data streaming with affordability, LEROY supports SHM applications in budget-constrained infrastructure projects, enhancing the maintenance and safety of steel structures., The authors are indebted to the projects PID2021- 126405OB-C31 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Remote sensing in bridge digitalization: a review

  • Casas Rius, Joan Ramon
  • Chacón Flores, Rolando Antonio
  • Catbas, Necati
  • Riveiro, Belén
  • Tonelli, Daniel
A review of the application of remote sensing technologies in the SHM and management of existing bridges is presented, showing their capabilities and advantages, as well as the main drawbacks when specifically applied to bridge assets. The main sensing technologies used as corresponding platforms are discussed. This is complemented by the presentation of five case studies emphasizing the wide field of application in several bridge typologies and the justification for the selection of the optimal techniques depending on the objectives of the monitoring and assessment of a particular bridge. The review shows the potentiality of remote sensing technologies in the decision-making process regarding optimal interventions in bridge management. The data gathered by them are the mandatory precursors for determining the relevant performance indicators needed for the quality control of these important infrastructure assets., Part of the research and case studies presented here was supported by the U.S. National Science Foundation (NSF) Division of Civil, Mechanical, and Manufacturing Innovation (Grant Number 1463493), Transportation Research Board of the National Academies-IDEA Project 222, and National Aeronautics and Space Administration (NASA) Award No. 80NSSC 20K0326, by the European Commission through the ASHVIN project: “Assistants for Healthy, Safe, and Productive Virtual Construction Design, Operation & Maintenance using a Digital Twin” an H2020 project under agreement 958161 and by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The work has also received support from the MONITORED project, Ref. RED2022-134431-T funded by MCIN/AEI/10.13039/501100011033. This research was also financed by the European Union-Next Generation EU, Mission 4 Component 2-CUP E53D23003560006. The study presented was also carried out as part of the program of activities carried out as part of the agreement between the ReLUIS Interuniversity Consortium and the Superior Council of Public Works stipulated pursuant to art. 3 of the Decree of the Minister of Infrastructure no. 578 of 17 December 2020, and the agreement between the ReLUIS Interuniversity Consortium and the Italian Department of Civil Protection. COSMO-SkyMed products have been provided free of charge for research purposes by the Italian Space Agency, Project Card ID: 630 “SAR SHM of bridges”., Peer Reviewed, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Eigenfrequency analysis of bridges using a smartphone and a novel low-cost accelerometer prototype

  • Komarizadehasl, Seyedmilad
  • Xia, Ye
  • Komary, Mahyad
  • Lozano Galant, Fidel
The final authenticated version is available online at https://doi.org/10.1007/s11709-024-1055-5., Researchers are paying increasing attention to the development of low-cost and microcontroller-based accelerometers, in order to make structural health monitoring feasible for conventional bridges with limited monitoring budget. Parallel with the low-cost sensor development, the use of the embedded accelerometers of smartphones for eigenfrequency analysis of bridges is becoming popular in the civil engineering literature. This paper, for the first time in the literature, studies these two promising technologies by comparing the noise density and eigenfrequency analysis of a self-developed, validated and calibrated low-cost Internet of things based accelerometer LARA (low cost adaptable reliable accelerometer) with those of a state of the art smartphone (iPhone XR). The eigenfrequency analysis of a footbridge in San Sebastian, Spain, showed that the embedded accelerometer of the iPhone XR can measure the natural frequencies of the under study bridge., The paper is supported by the projects PID2021-126405OB-C31, funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, the National Natural Science Foundation of China (Grant Nos. 52278313 and 52411540031), the Project to Attract Foreign Experts (No. G2023133018L), and the Top Discipline Plan of Shanghai Universities—Class I., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad
  • Bajic, Petar
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
  • Turmo Coderque, José
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cost-effective bridge health monitoring via automated operational modal analysis using low-cost adaptable and reliable accelerometers

  • Delgado Zhagui, Erika Beatriz
  • Komarizadehasl, Seyedmilad
  • Torralba Mendiola, Víctor
  • Díaz Rozo, Javier
  • Turmo Coderque, José
Structural Health Monitoring (SHM) is gaining traction as a crucial tool to ensure the safety and longevity of vital infrastructure. However, high costs of industrial-grade sensors create significant barriers to widespread implementation, especially in financially constrained projects. To overcome these challenges, this paper introduces the Low-cost Adaptable Reliable Accelerometer (LARA) as a feasible alternative for SHM, offering a significant reduction in financial burden without compromising performance. The study evaluates LARA capabilities through a comparative analysis with a traditional commercial accelerometer (PCB 607A61) during an experimental campaign on the Andoain Road Bridge. Key aspects investigated include noise density, internet-based data synchronisation, and experimental applications for determining the bridge’s dynamic characteristics. An automated Operational Modal Analysis (OMA) procedure, integrating data acquisition and modal computation using LARA, was developed to streamline SHM. Results demonstrated that LARA closely matches commercial accelerometers in accuracy, with minimal discrepancies in eigenfrequencies and high Modal Assurance Criterion (MAC) values. The data were further used to calibrate a finite element model (FEM) of the bridge, which closely aligned with experimental modal properties. The findings confirm that LARA is a reliable, cost-effective solution for SHM, providing performance comparable to commercial sensors and enabling accessible model calibration for improved structural analysis., The authors are indebted to the project PID2021-126405OB-C31 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness (MICIN/AEI/10.13039/ 501100011033/). The authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain, for the funding provided through Agaur (2021 DI 081). It is also to be noted that funding for this research has been provided for Erika Delgado by the Spanish Agencia Estatal de Investigacion del Ministerio de Ciencia Innovacion y Universidades Grant (DIN2021- 012035)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Application of intelligent low-cost accelerometers for bridge monitoring with a deep learning approach

  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad
  • Xia, Ye
Despite the crucial role of structural health monitoring (SHM) in ensuring the integrity and safety of essential infrastructure, its adoption is often limited by the high costs of traditional sensors. This study introduces an innovative approach for creating intelligent, high-performing low-cost accelerometers using a deep learning framework rooted in long short–term memory (LSTM) neural networks. Initially, commercial sensors are temporarily installed alongside low-cost accelerometers on a bridge to facilitate the training process. Once the training is complete, the commercial sensors are removed, leaving the calibrated low-cost accelerometers permanently in place to perform continuous SHM tasks. In a case study, a bridge was equipped with an array of six low-cost and six commercial sensors. The efficacy of this innovative approach is corroborated through a comparative analysis of mode shapes and eigenfrequencies derived from both the low-cost and commercial sensors, as well as intelligent low-cost accelerometers., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Accuracy of Ground Penetrating Radar (GPR) in locating post-tensioned cables

  • Mazzatura, Isabella
  • Caprili, Silvia
  • Salvatore, Walter
  • Casas Rius, Joan Ramon
The inspection and assessment of post-tensioned (PT) bridges is a complex issue, first involving the evaluation of the conservation status of the cables. One of the most crucial pieces of information to be confident with is the cables' location since it allows the success of all subsequent tests in the tendons (both non-destructive and destructive) and is critical in the bearing capacity of the beam in bending and shear as well. Many non-destructive techniques (NTDs) are studied and employed by the scientific community and practitioners for the cables' trace determination in PT beams; one of the most promising is the Ground Penetrating Radar (GPR). This technique is commonly employed in the location of metallic elements, both under the ground (pipes, utilities, etc.) and inside the concrete (reinforcements, ducts, etc.). The GPR technology exploits electromagnetic waves typically in the range of 1000-5000 MHz in the inspection of structures and tunnel lines. The variation of electromagnetic properties of the materials results in changes in the speed of travel, attenuation, and redirection of signals. The present research deals with the determination of the GPR accuracy in locating cables in PT structures. A laboratory testing campaign on specially designed samples was conducted for this aim. The tested walls contain both metallic and plastic ducts., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Frequency identification of non-beam bridges using vehicle scanning methods: Analytical formulation and experimental validation

  • Erduran, Emrah
  • Gönen, Semih
  • Komarizadehasl, Seyedmilad
  • Xia, Ye
This article presents a novel analytical formulation that demonstrates how the natural vibration frequencies of any bridge - regardless of its structural type, geometry, or boundary conditions - can be identified from the vibrations recorded by an instrumented vehicle crossing the bridge. This formulation broadens the scope of vehicle scanning methods for bridge frequency identification by removing the traditional assumption of sinusoidal mode shapes, which previously limited their application to simply supported beam bridges. The methodology begins by expanding bridge vibrations using a Fourier series, demonstrating that only the natural frequencies of the bridge contribute nonzero terms to this expansion. This is universally applicable, independent of bridge typology and geometry. Using Duhamel’s integral, the response of a vehicle traversing the bridge was computed to analytically prove that the bridge’s natural frequencies appear in the vehicle’s vibration spectrum. To validate the formulation, we present two applications. First, a numerical study models an 80¿m steel arch bridge, confirming its non-sinusoidal mode shapes through eigenvalue analysis. A virtual vehicle crossing simulation reveals that the bridge’s natural frequencies are clearly identifiable in the Fourier amplitude spectrum (FAS) of the vehicle vibrations. Second, a field test is conducted on a 602¿m cable-stayed bridge using an instrumented vehicle equipped with low-cost roof-mounted accelerometers. The first three modal frequencies of the bridge are successfully extracted from the vehicle’s recorded vibrations, demonstrating the practical feasibility of the developed formulation in real-world conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and numerical studies on shear failure behavior variability in RC beams without shear reinforcement

  • Zhu, Jinggao
  • Li, Shengtao
  • Sun, Yangyang
  • Li, Peng
  • Chen, Xudong
  • Casas Rius, Joan Ramon
© <2025> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Reinforced concrete (RC) beams without stirrups are known to exhibit significant variability in shear failure behavior. In the present study, this variability is experimentally reproduced through non-destructive testing, revealing up to a 65% difference in shear failure loads and providing high-quality data for detailed analysis. Based on the test data, advanced diagnostic techniques—Digital Image Correlation (DIC) and Distributed Fiber Optic Sensing (DFOS)—are employed to explore the underlying causes, discovering that the observed variability is closely linked to differences in shear crack angles. To validate this finding, an enhanced bond-based peridynamic (PD) model incorporating anisotropy is developed, with improved capability in simulating crack propagation with varying orientations. The model accurately reproduces the load–displacement responses, crack patterns, and reinforcement strain distributions for both low- and high-capacity specimens, demonstrating its effectiveness. The validated model is further used to investigate the relationship between the critical shear crack angle and shear failure load, revealing a clear negative correlation. The study contributes to a deeper understanding of the mechanisms underlying shear failure variability and support the development of effective numerical tools for RC beam design., Acknowledged financial supports include the National Key R&D Program of China (Grant No. 2021YFB2600200), the Science and Technology Project of POWERCHINA Ltd. (Grant No. DJ-HXGG-2024-06; DJ-ZDZX-2023-01) and the Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Eigenfrequency analysis using fiber optic sensors and low-cost accelerometers for structural damage detection

  • Komarizadehasl, Seyedmilad
  • González Jiménez, Manuel Antonio
  • Pérez Casas, José María
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Structural Health Monitoring (SHM) is crucial for infrastructure safety and integrity. Arduino-based sensors are gaining popularity in low-cost SHM structures. Distributed fiber optic systems (DFOS), such as Distributed Acoustic Sensing (DAS), are employed for accurate SHM despite their high costs, computational demands, and energy consumption. The primary objectives of this work are to compare the accuracy of an accelerometer named LARA (Low-cost Adaptable Reliable Accelerometer (LARA)) that utilizes both Arduino and Raspberry Pi technologies with a DAS system in detecting structural damage and to explore the potential advantages of combining LARA and DAS to create an effective SHM tool. This study is the first to enhance the design of LARA. Subsequently, LARA and DAS were used in a laboratory setting to analyze eigenfrequency changes in a beam model with induced localized damage. Finally, this study evaluated the precision and reliability of LARA and its potential role as a trigger for DAS in detecting localized damage. The findings show that both LARA and DAS can identify changes in the eigenfrequencies of damaged structures with deviations as small as 3.68 %. Consequently, LARA demonstrated its potential as a trigger for DAS, significantly reducing the computational demands while enriching the analysis. This approach offers highly accurate eigenfrequency measurements and enhances the analytical capabilities of DAS by identifying the primary axes of the detected eigenfrequencies., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021–126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. Dr. Seyedmilad Komarizadehasl is indebted to a grant provided by the Polytechnic University of Catalonia to encourage research among new teaching staff with a reference of ALECTORS-2023., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A comprehensive review and analysis of shear strengthening of RC beams with external prestressing bars

  • Komarizadehasl, Seyedmilad
  • Shen, Zhouhui
  • Xia, Ye
  • Amin, Al
  • Turmo Coderque, José
Shear failure in reinforced concrete (RC) structures, characterized by their sudden and brittle nature, often results from inadequate shear reinforcement or degradation due to aging or increased loading demands. To increase shear capacity, various retrofitting techniques have been developed, with external prestressing bars recognized as an effective solution. These bars apply an active clamping force to improve shear resistance and delay the formation and propagation of diagonal cracks. This review presents a comprehensive analysis of experimental investigations and numerical models, such as strut-and-tie and damage-plasticity approaches, to evaluate shear strengthening with external prestressing bars. In this review, early exploratory studies, the evolution of experimental programs, and the development of analytical and finite element models for predicting the behavior of strengthened beams are examined. Particular attention is given to validating numerical models against experimental data, focusing on load-sharing mechanisms, ductility, failure modes, and serviceability. Practical design implications are evaluated, research gaps are identified, and recommendations for future studies are proposed to advance the implementation of this technique. Findings from authoritative sources are integrated to provide a definitive reference for researchers and engineers seeking sustainable and efficient shear retrofit solutions., The authors extend their sincere gratitude for the support provided by the National Natural Science Foundation of China (52278313, 52411540031) and the projects PID2021-126405OB-C31, funded by FEDER funds, A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Long-term performance evaluation of low-cost sensors using AI-driven tools

  • Lozano Galant, Fidel
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
In civil engineering and architectural applications, Micro Electro-Mechanical System (MEMS) accelerometer-based inclinometers are widely used due to their costeffectiveness. However, a major challenge associated with these devices is their long-term durability and reliability. Typically, commercial inclinometers are employed to calibrate low-cost solutions over time, which ultimately increases monitoring costs and significantly reduces their economic advantages. To address this limitation, this paper presents a novel approach based on Artificial Intelligence (AI) to evaluate the long-term performance of the low-cost inclinometer called LARA (Low-Cost Adaptable Reliable Anglemeter). This AI-driven tool utilizes a Multilayer Perceptron to predict the inclination of a monitored steel structure under real environmental conditions. By comparing the predicted results with actual on-site measurements, potential inaccuracies in the low-cost inclinometer can be automatically detected, indicating the need for recalibration. The effectiveness and applicability of the proposed tool are demonstrated through a study conducted on a real steel frame located in Spain. This study demonstrates how the AI-based approach can enhance the assessment of the low-cost inclinometer’s performance and its suitability for long-term monitoring of real structures., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OBC32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and National Natural Science Foundation of China (52278313)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrating web-based weather data into building information modeling models through robot process automation

  • Atencio, Edison
  • Lozano Galant, Fidel
  • Alfaro, Ignacio
  • Lozano Galant, José Antonio
  • Muñoz La Rivera, Felipe
The rapid evolution of digital technologies has revolutionized the architecture, engineering, and construction (AEC) industry, driving the wide-spread adoption of digital twins for structures. These virtual replicas, developed using Building Information Modeling (BIM) methodology, incorporate extensive information databases, proving indispensable for enhancing project management throughout a structure’s entire lifecycle and towards smart city development. As the impact of climate change continues to grow, hazardous weather alerts play a critical role as an early-warning system that notifies stakeholders of imminent threats, thereby influencing decision-making processes in construction projects. Surprisingly, despite its evident value, the integration of alert systems for hazardous weather conditions into BIM is often overlooked. To fill this gap, this paper proposes Robot Process Automation (RPA) protocols to automate the integration of real-time weather parameters into a structure’s BIM models. These very protocols are also used as alert systems, enabling the timely notification of stakeholders in the event of detected hazardous weather conditions. The effectiveness of the proposed methodology is demonstrated through its practical application in enhancing the safety of an actual building in Viña del Mar, Chile., This research was funded by FEDER, grant number PID2021-126405OB-C31 and PID2021- 126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Internet of Things long-range-wide-area-network-based wireless sensors network for underground mine monitoring: planning an efficient, safe, and sustainable labor environment

  • Cacciuttolo, Carlos
  • Atencio, Edison
  • Komarizadehasl, Seyedmilad
  • Lozano Galant, José Antonio
Underground mines are considered one of the riskiest facilities for human activities due to numerous accidents and geotechnical failures recorded worldwide over the last century, which have resulted in unsafe labor conditions, poor health outcomes, injuries, and fatalities. One significant cause of these accidents is the inadequate or nonexistent capacity for the real-time monitoring of safety conditions in underground mines. In this context, new emerging technologies linked to the Industry 4.0 paradigm, such as sensors, the Internet of Things (IoT), and LoRaWAN (Long Range Wide Area Network) wireless connectivity, are being implemented for planning the efficient, safe, and sustainable performance of underground mine labor environments. This paper studies the implementation of an ecosystem composed of IoT sensors and LoRa wireless connectivity in a data-acquisition system, which eliminates the need for expensive cabling and manual monitoring in mining operations. Laying cables in an underground mine necessitates cable support and protection against issues, such as machinery operations, vehicle movements, mine operator activities, and groundwater intrusion. As the underground mine expands, additional sensors typically require costly cable installations unless wireless connectivity is employed. The results of this review indicate that an IoT LoRaWAN-based wireless sensor network (WSN) provides real-time data under complex conditions, effectively transmitting data through physical barriers. This network presents an attractive low-cost solution with reliable, simple, scalable, secure, and competitive characteristics compared to cable installations and manually collected readings, which are more sporadic and prone to human error. Reliable data on the behavior of the underground mine enhances productivity by improving key performance indicators (KPIs), minimizing accident risks, and promoting sustainable environmental conditions for mine operators. Finally, the adoption of IoT sensors and LoRaWAN wireless connectivity technologies provides information of the underground mine in real-time, which supports better decisions by the mining industry managers, by ensuring compliance with safety regulations, improving the productive performance, and fostering a roadmap towards more environmentally friendly labor conditions., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021–126405OBC32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. The financial support of the Research Department of the Catholic University of Temuco and the Civil Engineering Department of the University of Castilla-La Mancha is also appreciated., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimization of prestressing operations in the design of cable-stayed bridges by applying the Direct Algorithm

  • Farré Checa, Josep
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
A new direct simulation of the cantilever erection method is presented in order to reduce the prestressing operations of stay cables. This new method introduces a direct approach for cable-stayed bridge construction using the cantilever erection method, employing independent finite element models. Prestressing forces are modeled as imposed strains based on the unstressed length concept to ensure the achievement of a specific target state post-construction (objective service stage, OSS). This facilitates faster simulation of the construction process, particularly for steel bridges and the predesign of concrete cable-stayed bridges, and enables direct simulation of construction stages and OSS achievement. The proposed method's efficacy is demonstrated through the analysis of a cable-stayed bridge., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/ directed by Professor José Turmo. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Extreme response scenarios for long-span bridges: probabilistic generation and interpretable clustering under free-flow and congested traffic

  • Wang, Xuejing
  • Ruan, Xin
  • Casas Rius, Joan Ramon
  • Zhang, Mingyang
  • Li, Yaohan
  • Zhou, Haijun
  • Dong, You
Due to extended influence lines and diverse vehicle compositions, the loading mechanisms of long-span bridges differ fundamentally from those of short- and medium-span bridges. Prior studies often ascribe extreme effects to congested traffic, assuming that vehicle density and interactions control peak responses. Recent observations, however, indicate that certain free-flow states, such as nighttime periods with higher truck percentages or clusters of heavy trucks, can also trigger comparable extreme responses. These findings challenge the notion of universal congestion dominance and motivate a reassessment of how both traffic states contribute to extremes. Moreover, many traffic studies rely on full-duration simulations, implicitly treating all time segments as equally contributory. In reality, only a small subset of extreme-response scenarios (block maxima) governs structural extremes, yet such scenarios are rarely isolated and compared across traffic states. Therefore, as a novelty, this study introduces a probabilistic approach that simulates only the governing extreme scenarios to rapidly produce a large number of relevant samples of maximum traffic effects. The differences in vehicle composition between free-flow and congested extreme scenarios are compared under the same return period. The results show that truck percentage and clustering are decisive drivers; specific free-flow conditions can yield extreme effects comparable to, and occasionally no lower than, those under congestion. In addition, while specifically focusing on extreme scenarios, the proposed methodology substantially reduces computational cost and time, while preserving daily maxima, thereby supporting the development of real-time structural monitoring and early-warning systems under diverse traffic conditions., The National Natural Science Foundations of China (Grant numbers 52078367, 52208197), the Academician Project Foundation of CCCC (Grant numbers: YSZX-01–2020–01-B), the Shenzhen Science and Technology program (Grant No. 20220811152251005) are gratefully acknowledged. The support given by Grant PID2021–126405OB-C31 and PID2022–140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged. The opinions and conclusions presented in this article are those of the authors and do not necessarily reflect the views of the sponsoring organizations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing performance evaluation of low-cost inclinometers for the long-term monitoring of buildings

  • Lozano Galant, Fidel
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad
  • González-Arteaga, Jesús
  • Xia, Ye
The development of low-cost structural and environmental sensors has revolutionized monitoring practices across numerous fields, enabling cost-effective solutions for infrastructure and building health assessment. However, a critical challenge associated with these sensors is their long-term durability and reliability. Surprisingly, despite the significant interest in these low-cost devices, the literature does not present any solutions for ensuring their long-term performance. To address this gap, this study proposes an innovative artificial intelligence-based approach for evaluating the long-term performance of low-cost inclinometers using a low-cost adaptable reliable anglemeter. This method automatically compares the inclinations of actual onsite measurements with predicted values under real environmental conditions. Over time, if the discrepancies between both measurements surpass a predefined statistical threshold, it may signal potential inaccuracies in the low-cost inclinometer, thereby suggesting the need for recalibration or presence of structural anomalies. The effectiveness and applicability of the proposed tool were demonstrated through a long-term study conducted on a real steel frame in Spain., This work was supported by the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds through the program “A Way to Make Europe” and by the Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. It also received support from the National Natural Science Foundation of China (Grant No. 52278313)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancements in sustainable prestressed concrete bridge technologies: a comprehensive review

  • Komarizadehasl, Seyedmilad
  • Amin, Al
  • Xia, Ye
  • Turmo Coderque, José
Advancements in prestressed concrete bridge technology have increasingly focused on sustainability in response to growing environmental concerns. This review examines recent innovations in integrating recycled concrete aggregates (RCA) and supplementary cementitious materials (SCMs) within prestressed concrete to conserve resources, reduce waste, and lower carbon emissions. Sustainable prestressing techniques, including the use of fiber-reinforced polymer (FRP) tendons and shape memory alloys (SMAs), increase the durability of prestressed concrete bridges, extend service life, and minimize maintenance needs, thereby reducing environmental impact. Key methodologies, such as lifecycle assessment (LCA) and performance-based design, are highlighted for their roles in optimizing structural performance while reducing the ecological footprint. Despite the benefits, barriers to widespread adoption remain, including technical limitations, economic challenges, and regulatory constraints. To address these issues, this review proposes further research on material development, updated design guidelines, cost-benefit analyses, and supportive policy initiatives. The findings confirm that integrating sustainable materials and advanced technologies in prestressed concrete bridge construction offers environmental advantages without compromising structural integrity. Collaborative efforts among engineers, researchers, policy-makers, and educators are essential to overcoming these barriers and advancing sustainable, resilient infrastructure., The authors extend their sincere gratitude for the support provided by the projects PID2021-126405OB-C31, funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. This study is also supported by the Research & Development Program of China Railway Shanghai Group Corporation Limited (2023158), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Automatic assessment of the fatigue life of cables of cable-stayed bridges by on-line monitoring

  • Xu, Bin
  • Wu, Zirao
  • Casas Rius, Joan Ramon
  • Dan, Danhui
This is the peer reviewed version of the following article: Xu B, Wu Z, Casas JR, Dan D. Automatic assessment of the fatigue life of cables of cable-stayed bridges by on-line monitoring. Structural Concrete. 2024. https://doi.org/10.1002/suco.202400609, which has been published in final form at https://doi.org/10.1002/suco.202400609. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., To accurately and timely evaluate the long-term performance of cables in cable-stayed bridges, an automatic perception technology scheme by on-line monitoring of cable vibrations is proposed for the fatigue damage evaluation of in-service cables. In the fatigue-stress amplitude of cables, the stress produced by tension changes caused by external actions like traffic, wind, and temperature is the main component. When cables vibrate significantly, the stress caused by changes in cable vibration-induced additional stress should not be neglected. Besides axial stress, bending stress is also significant in cable fatigue damage analysis. To make cable fatigue life prediction closer to real engineering scenarios, this factor should be considered. First, based on the cable dynamic stiffness theory, a method is proposed for the automatic gathering of the actual full-stress time history of a cable by on-line vibration monitoring. Furthermore, based on Miner's linear fatigue damage accumulation theory, an automatic fatigue life assessment method is proposed and applied to the vibration monitoring data of cables on an operational bridge. The results indicate that the proposed technology realizes automatic on-line monitoring of cable forces and fatigue assessment of cables. Through statistical analysis of cable fatigue stress amplitude, it was determined that in cable-stayed bridges, compared to long cables, short cables are more sensitive to external variable loads, typically experiencing larger and more frequent tension changes, and are more prone to fatigue. Therefore, short cables should be given more attention when analyzing cable fatigue in cable-stayed bridges., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modeling and testing of a composite steel–concrete joint for hybrid girder bridges

  • Shangguan, Bing
  • Su, Qingtian
  • Casas Rius, Joan Ramon
  • Su, Hang
  • Wang, Shengyun
  • Zhao, Rongxin
A hybrid girder bridge adopts a steel segment at the mid-span of the main span of a continuous concrete girder bridge. The critical point of the hybrid solution is the transition zone, connecting the steel and concrete segments of the beam. Although many girder tests revealing the structural behavior of hybrid girders have been conducted by previous studies, few specimens took the full section of a steel–concrete joint due to the large size of prototype hybrid bridges. In this study, a static load test on a composite segment to bridge the joint between the concrete and steel parts of a hybrid bridge with full section was conducted. A finite element model replicating the tested specimen results was established through Abaqus, while parametric studies were also conducted. The test and numerical results revealed that the concrete filling in the composite solution prevented the steel flange from extensive buckling, which significantly improved the load-carrying capacity of the steel–concrete joint. Meanwhile, strengthening the interaction between the steel and concrete helps to prevent the interlayer slip and simultaneously contributes to a higher flexural stiffness. These results are an important basis for establishing a rational design scheme for the steel–concrete joint of hybrid girder bridges., This research was funded by Spanish Ministry of Science and Innovation (grant number PID2021-126405OB-C31), Shanghai Science and Technology Commission (grant number 20XD1432400) and Guangdong Yejian Construction Drawing Review Center Co., Ltd. (grant number GDYJ-RD-17)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bridge damage assessment under traffic and environmental variability: a case study on Yonghe cable-stayed bridge

  • Zunino, Leonardo
  • Casas Rius, Joan Ramon
  • Domaneschi, Marco
Bridges are essential components of civil infrastructure that must operate safely and reliably. Traditional methods for assessing structural health rely on the concept that changes in a structure’s dynamic response may indicate potential damage. However, variations due to operational and environmental factors (like traffic and temperature) can also contribute to these changes. This makes damage detection more challenging, as a bridge may still be safe while exhibiting changes in its dynamic response due to these factors. If these effects are not properly accounted for, it could lead to false positive alerts. This article proposes a methodology for detecting and localizing damage in bridges subjected to traffic loads and environmental variability. Acceleration signals from accelerometers placed on the deck of a cable-stayed bridge in China were analyzed as part of a real monitoring effort. This data bank enabled the implementation of the algorithm on real signals in both undamaged and damaged scenarios. Variational Mode Decomposition is used to decompose the signal into Intrinsic Mode Functions. The Hilbert Transform is then employed to extract instantaneous frequencies, which represent damage-sensitive features in this context. Furthermore, environmental effects are removed from the damage-sensitive features using Principal Component Analysis. Finally, damage detection and localization are achieved using a statistical analysis able to confirm the previous data processing. An unsupervised clustering algorithm (K-means) is used to detect changes between the undamaged state and the damaged one. The results demonstrate the method’s effectiveness when applied to real-world scenarios, suggesting its potential application in structural health monitoring., The authors would like to express their sincere gratitude to Prof. Hui Li, Harbin Institute of Technology, for providing the data and images of the actual damage conditions of the Yonghe Bridge. Funding: This work was supported by MIUR - PRIN 2022 ‘‘BIORESTORE – BIO-based Resilient Energy and Seismic retrofiT Of the REsidential building stock’’ [Prot. 202234HM8J, CUP E53C24002680006]; and by MCIN/AEI - ‘‘ERDF A way of making Europe’’ [Grant PID2021- 126405OB-C31]. This publication is also part of the project PNRRNGEU which has received funding from the MUR – DM 629/2024., Peer Reviewed, Postprint (published version)