Pasar al contenido principal

Impresión 3D de hormigón sensorizado para componentes de edificación orientados a la monitorización activa (SENSOCRETE 3D)

PLEC2021-007982

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad|||0000-0002-3219-2970
  • Bajic, Petar
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Turmo Coderque, José|||0000-0001-5001-2438
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad|||0000-0002-3219-2970
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Tošić, Nikola|||0000-0003-0242-8804
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancing smart health monitoring: a review of low-cost sensors for structural assessment

  • Komary, Mahyad
  • Komarizadehasl, Seyedmilad
  • Tošić, Nikola
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
In response to the global demand for structural health monitoring (SHM), particularly in the context of expanding structural assets, this paper conducts a thorough exploration of the integration of low-cost sensors in SHM applications. The primary focus is to introduce various low-cost sensors commonly used in SHM applications for bridges, aiming to unveil their full potential as economical alternatives to expensive commercial sensors. This approach not only broadens accessibility, allowing structures with limited SHM resources to benefit but also enhances measurement points for more robust results. The study begins with the introduction of the NodeMCU, serving as the programmable logic controller equipped with a built-in WiFi module. This feature enables IoT functionality for the low-cost sensors under review. The exploration then delves into an array of digital sensors. Systematic ambient tests were conducted to uncover challenges during sensor installation and data acquisition. The paper not only introduces these low-cost electronic devices but also provides practical solutions to overcome identified issues, ensuring their effective utilization for SHM purposes., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy, Competitiveness MICIN/AEI/10.13039/501100011033/ and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31, PID2021-126405OB-C32 and PLEC2021-007982., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a low-cost IoT-based sensor for early-stage concrete monitoring

  • Komary, Mahyad
  • Bajic, Petar
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
  • Turmo Coderque, José
Concrete is an essential construction component that needs to be examined carefully for an early strength assessment in order to guarantee structural integrity and long-term durability. This paper delves into the viability of utilizing low-cost sensors, interfaced with an Arduino-based microcontroller, for real-time data acquisition in concrete structures. The study focuses on their application in the early stages to investigate the thermal cycles due to hydration reaction, particularly within macro-synthetic fibre reinforced concrete. DHT22 sensors are used to measure the concrete sample’s temperature and humidity parameters. These sensors are linked to a NodeMCU microcontroller that has an integrated WiFi module to provide real-time data updates on the cloud. The programming code is created using the Arduino IDE platform and then loaded into the NodeMCU microcontroller to control sensor functions. The validation process consists of an early laboratory test and the placement of an additional DHT22 sensor outside the concrete sample to monitor the surrounding temperature and humidity to evaluate the system’s operation and sensor´s accuracy. The collected data reveal promising insights, particularly in investigating corrosion within embedded reinforced rebar for future researches., This research has been supported by the Ministry of Science and the Investigation (Ministerio de Ciencia e Innovación), the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain, and the European Union “NextGenerationEU”/PRTR. Project references: PID2019-108978RB-C32, PID2021-126405OB-C31 and PLEC2021-007982., Peer Reviewed, Postprint (published version)