Pasar al contenido principal

Optimización topológica para una metodología de construcción de bajo impacto ambiental (GOLIATH)

PLEC2022-009441

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO PRIVADA CENTRE CIM

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Topology-optimized segmental 3D-printed concrete footbridge activated by post-tensioning: design, manufacturing and assembly demonstration

  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Xia, Ye
  • Li, Fangyuan
This paper presents Goliath footbridge, a full-scale 6 m span segmental 3D-printed concrete footbridge activated by post-tensioning, describing the end-to-end process from design and fabrication to transport, assembly, and structural activation. This structure represents the demonstrator of a research project that was conceived as an end-to-end demonstrator integrating material development, digital design, additive manufacturing, and site erection. The printable mortar was previously characterized through rheological and mechanical tests to verify extrusion performance, buildability, and strength development. The structural geometry was obtained through topology optimization under self-weight and pedestrian service loads, aiming to maximize stiffness and reducing material consumption. The resulting solution provided an efficient lightweight configuration adapted to additive manufacturing. After production, the segments were transported to site, rotated into their final position, assembled on temporary supports, aligned through the dry-joint system, and sequentially activated by post-tensioning. The demonstrator confirmed the technical feasibility of combining topology optimization, modular 3D concrete printing, dry-joint assembly, and post-tensioning for pedestrian bridge applications. It also highlighted practical challenges related to dimensional tolerances, local stress concentrations, cracking sensitivity, and durability of joints and anchorage zones. The study provides a practical proof of concept for future scalable 3D-printed concrete bridge construction., This publication is part of the R&D project PLEC2022-009441, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. CIM-UPC and Lagula Arquitectes were partners of the project and their contributions in the design and technical development were essential. Additionally, the authors acknowledge Aridditive for their support in the manufacturing of the 3D-printed segments., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed, Postprint (published version)