Pasar al contenido principal

HORMIGONES REFORZADOS CON MACROFIBRAS SINTETICAS PARA APLICACIONES ESTRUCTURALES EN CONDICIONES DE ALTAS TEMPERATURAS

PID2023-149321OB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental validation of the short- and long-term structural performance of macro-synthetic fibre reinforced concrete beams with minimum longitudinal reinforcement

  • Tošić, Nikola|||0000-0003-0242-8804
  • Bajic, Petar
  • Liu, Guanzhi
  • Nogales, Alejandro
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Fibre reinforced concrete has become a recognized and accepted material for structural applications. This has been recognized by its acceptance into international design codes, such as the fib Model Code 2010 and 2020. Nonetheless, certain national standards, such as the Eurocode 2, adopted by CEN member states, so far only consider the use of steel fibres. However, macro-synthetic fibre reinforced concrete (MSFRC) is being increasingly used, warranting its inclusion in such standards. This works aims at supporting the initiative of CEN/TC 250/SC 2/WG 3 for producing a CEN Technical Specification for MSFRC. For this purpose, a three-year experimental campaign was carried out to characterize the mechanical properties of MSFRC with different fibre types and amounts, to test short- and long-term structural behaviour of steel rebar macro-synthetic fibre reinforced concrete (SRMSFRC) cracked elements and to conduct constitutive modelling and analysis of the results. The results reveal a significant contribution of fibres to the flexural strength of full-scale beams at both 3 and 9¿kg/m3 polypropylene fibre contents. In terms of sustained load tests, the overall deflection behaviour, analysed on a normalised level (total deflection/initial deflection) evolves similarly between SRMSFRC and reinforced concrete (RC) beams. Finally, the analytical predictions of SRMSFRC deflections demonstrate good agreement with experimental results, without the need to include any time-dependent properties of MSFRC. The experimental evidences reported in this study confirm that macro-synthetic fibres effectively enhance the flexural tensile capacity of SRMSFRC elements with minimum conventional steel reinforcement, both at short- and long-term, under sustained loading conditions., This study is part of the project HEAT, under grant PID2023–149321OB-C32, funded by MCIN/AEI/10.13039/501100011033. The study also received funding from Master Builders Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The influence of nodal region detailing on the quasi-static and dynamic response of frame corners

  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Viula Faria, Duarte M.
  • Brantschen, Fabio
  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Fernández Ruíz, Miguel
Nodal regions are present in a large number of reinforced concrete structures, such as cut-and-cover tunnels, retaining walls, roofs or silos. For such discontinuity regions, the arrangement and detailing of the reinforcement largely determines their performance. In this regard, the analysis of the quasi-static response of nodal regions has typically focused on the resistance of the region, but limited works have been dedicated to the analysis of the post-peak response and the capacity to dissipate energy of such details. In this paper, an extensive database (126 test results) of nodal regions of reinforced concrete frames collected by the authors is presented and analysed. Considering these results, an analytical model for design of such regions under quasi-static loading conditions is introduced as well as its implications on the structural response. Finally, such approach is extended including considerations on the response and governing load-carrying actions in case of large deformations., This study was financially supported by the Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades (Gobierno de España), under the project HEAT (PID2023-149321OB-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flexural fatigue performance of pre-cracked steel fibre reinforced concrete: experimental program and design-oriented approach

  • Martinello Carlesso, Debora|||0000-0001-7614-1908
  • Pialarissi Cavalaro, Sergio Henrique|||0000-0002-9368-0898
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
This paper analyses the mechanical behaviour of steel fibre reinforced concrete (SFRC) subjected to cyclic loading. Fatigue tests were conducted on pre-cracked specimens using a three-point bending setup, considering initial crack widths and load levels representative of the service limit state (SLS). A Weibull distribution was used to establish the S-N-Pf curve. The crack growth rate indicated that inflection points are governed by the quasi-static load-CMOD relationship, transitioning to a damage accelerate stage with reduced post-cracking strength. Energy dissipation analysis revealed a significant increase of this property at lower load levels during the final 80¿% of fatigue life, while increases were less pronounced at higher load levels. Maximum energy dissipation occurred at the CMOD corresponding to a 2¿% reduction in load-bearing capacity. Visual analysis of SFRC cross-sections suggested that fatigue failure resulted from a combination of persistent fibre pull-out, fibre-matrix damage, and fibre rupture. An improved conceptual model accurately estimates CMOD evolution and suggests that fatigue tests can be shortened by pre-cracking or performing a set number of cycles to stabilize deformation rates. Fatigue life design considerations herein are proposed to the light of results and analysis carried out., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the ductility of lightly reinforced steel fibre reinforced concrete shallow beams subjected to flexure: Experimental evidences

  • Nogales Arroyo, Alejandro|||0000-0002-7009-8440
  • Galeote Moreno, Eduardo|||0000-0001-8370-4043
  • Aidarov, Stanislav|||0000-0001-5576-7215
  • Quijano Arteaga, Nadia Rosaura|||0000-0002-4055-5700
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
The use of fibres as partial or total replacement of longitudinal steel reinforcement is increasingly attracting interest as a sustainable-oriented solution for structural elements. Several research has been conducted on steel fibre reinforced (SFRC) members subjected to flexure and with low amount of longitudinal steel reinforcement (hybrid reinforcement) evidencing signs of crack localisation and ductility reduction in comparison to those comparable members with conventional reinforcement. Although there already are relevant scientific publications dealing with this topic, further evidences and results are still required to cover low ranges of reinforcement ratios and SFRC strength classes. To this end, an experimental programme was conducted in order to analyse the flexural response of thirteen simply supported 400 × 1000 × 3000 mm shallow beams made of different SFRC performance classes (1.5a, 2a and 1.5c) and reinforced with longitudinal reinforcement amounts ¿ = 0.15 %. The hybrid-reinforced elements tested showed a reduction of the ductility capacity up to a 50 % in comparison with its conventionally reinforced counterparts. Based on the experimental results, ductility analyses for both material and flexural performance of the members tested were conducted based on the fib Model Code 2020 and Eurocode-2 provisions. The results allow confirming that the minimum amount of reinforcement proposed in the Annex L of the Eucorode-2 for lightly reinforced elements with the inferior SFRC strength classes might be insufficient to provide the ductility levels assumed in design., The authors want to acknowledge the contribution and support of ACCIONA and Ghella through the AGJV Joint Venture. Furthermore, the authors want to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation through the HEAT project (PID2023–149321OB-C32). The first author wants to acknowledge the support provided by the Spanish Ministry of Science and Innovation through the Ayuda Torres Quevedo funding programme (PTQ2024-013739)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Resistance partial factor calibration for SFRC elements without shear reinforcement subjected to punching shear according to EN 1992-1-1:2023

  • Monserrat López, Andrea|||0000-0002-1480-4021
  • Bairán García, Jesús Miguel|||0000-0003-2831-1479
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Fernández Ruíz, Miguel
Punching shear failure is often the governing design criterion of flat slabs at Ultimate Limit State and may potentially lead to progressive collapses. The latest version of Eurocode 2 (EN 1992–1–1:2023) introduces a new punching shear design model for fibre reinforced concrete (FRC) slabs in its Annex L. According to this approach, the concrete and shear reinforcement contributions are estimated based on the Critical Shear Crack Theory and the beneficial influence of the fibres is considered by means of the residual tensile strength of FRC. The model of EN 1992–1–1:2023 moves towards more rational approaches based on physical models. However, it appears that the reliability and applicability of the new formulation require further validation and calibration, particularly regarding the fibre contribution to the shear resistance. This paper is addressed at this topic, in an effort to provide a consistent safety format and calibrated values of the partial factors for the punching shear resistance of FRC. To that aim, an extensive literature review was conducted compiling a comprehensive database of steel fibre reinforced concrete (SFRC) slab-column connections without shear reinforcement. A total of 261 tests from 29 studies were collected. This database was subsequently filtered, considering only specimens with usual amounts of fibres and dimensions in construction, resulting into 67 representative tests. This database was later used to perform a probabilistic reliability-based calibration of the resistance partial factor associated with the fibre contribution ¿V,FRC consistent with the FORM principles. The calibration considered different levels of scatter in the residual tensile strength of FRC, along with the target reliability index prescribed in the Eurocodes. The results show that a value of the resistance partial factor for the fibre contribution ¿V,FRC equal to 1.30 may be adopted for expected scatters in the residual tensile strength of FRC up to 20 %, covering a wide range of practical applications. For higher levels of scatter, up to 30 % as a reasonable estimate of the maximum acceptable scatter in typical applications, a value ¿V,FRC = 1.40 is suggested. For other cases, with even higher scatter or outside the range of parameters analysed, a detailed reliability analysis might be required, This study was financially supported by the Agencia Estatal de Investigaci´on (AEI), Ministerio de Ciencia, Innovación y Universidades (Gobierno de España), under the project HEAT (PID2023–149321OBC32), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chloride-induced corrosion effects on the structural performance of concrete with rebar and fibres: a review

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade, Carmen
  • Tošić, Nikola|||0000-0003-0242-8804
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Chloride-induced corrosion is a major contributor in the degradation of standardised steel-based products (e.g., rebars and fibres) commonly used for reinforcing concrete structures. Since cracked reinforced concrete elements are determined to be more susceptible to corrosion on the one hand, and fibres are effective in arresting crack growth and improving the post-cracking mechanical behaviour on the other hand, the use of fibres emerges as a promising strategy to enhance durability. This review is focused on the degradation of the load-bearing capacity, caused by chloride corrosion, in concrete elements reinforced with fibres and conventional rebar. Based on the recorded values of ultimate loads and the corresponding deflections in the reviewed studies, a lower decrease in the load-bearing capacity and less severe degradation of ductility were observed in elements where fibres (either steel or macro-synthetic) were used in combination with rebar compared with elements where only rebar was used. Furthermore, the recorded values of corrosion potential (Ecorr), corrosion current density (icorr) and gravimetric measurements indicated lower corrosion damage, delayed corrosion initiation and a prolonged propagation phase of corrosion. However, due to many differences in the methodology among the reviewed studies, the optimal fibre type or quantity cannot be identified unless more studies are performed., This research was supported by the Master Builders Solutions GmbH, Germany, the Ministry of Science and Investigation (Ministerio de Ciencia, Innovación y Universidades) the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain. Project reference: PID2019-108978RB-C32; grant reference: PRE2020-095457. Support was provided by project Hormigones Reforzados con Macrofibras Sintéticas para Aplicaciones Estructurales en condiciones de altas temperaturas (HEAT), project reference: PID2023-149321OB-C32., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Limestone calcined clay cementitious (LC3) paving flags with textile waste fibers and fine recycled aggregates: mechanical, durability and multi-criteria sustainability analysis

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
The demand for a sustainable built environment is steering construction materials research towards finding effective methods to reduce carbon emissions in concrete production. In this context, this study explores a triple-strategy approach oriented to increase the decarbonization potential of cementitious flags: (1) limiting Portland cement to 51¿% by incorporating limestone-calcined clay; (2) reinforcing the matrix with nonwoven textile waste fabrics; and (3) replacing natural aggregates with fine recycled aggregates from construction waste. Mechanical (flexural and uniaxial tensile strengths), weathering resistance (accelerated wet-dry cycles, freeze-thaw cycles, and water absorption), and serviceability parameters (thermal/acoustic insulations, abrasion, and post-fire residual resistance) of composite paving flags were characterized in laboratory conditions. Further, microstructural analysis and digital image correlation technique were implemented. The 30 mm-thick composite intended for paving flag reached the maximum flexural and tensile strengths of 8.9 and 2.1¿MPa, respectively. Deflection- and strain-hardening behavior was observed due to the synergistic interactions between the matrix and fiber. Despite relatively high water absorption =10¿%), the composite could satisfy the minimum requirements per standard for freeze-thaw and abrasion resistance. Finally, a sustainability performance analysis using a multi-criteria decision-making method—considering both environmental and socio-technical aspects—confirmed the composite’s viability from technical and sustainability standpoints, achieving satisfaction values of =¿0.7 on a 1.0 scale., The authors express their gratitude to the Government of Spain, Ministerio de Ciencia, Innovación y Universidades (MICIU), Agencia Estatal de Investigación (AEI) and by the European Regional Development Fund (ERDF) for the financial support received under the scope of the WASTE2BUILD project (Grant PID2024-156605OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU) and HEAT project (PID2023-149321OB-C32). The first author also extends his gratitude to UK Research and Innovation (UKRI)—Innovate UK for funding under the Knowledge Transfer Partnerships (KTP No. 13622) program. The authors gratefully acknowledge Professor Ana Maria Lacasta for her collaboration in assessing the acoustic properties., Peer Reviewed, 12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, 12 - Producció i Consum Responsables
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the ductility of lightly reinforced steel fibre reinforced concrete shallow beams subjected to flexure: Experimental evidences

  • Nogales Arroyo, Alejandro
  • Galeote Moreno, Eduardo
  • Aidarov, Stanislav
  • Quijano Arteaga, Nadia Rosaura
  • Fuente Antequera, Albert de la
The use of fibres as partial or total replacement of longitudinal steel reinforcement is increasingly attracting interest as a sustainable-oriented solution for structural elements. Several research has been conducted on steel fibre reinforced (SFRC) members subjected to flexure and with low amount of longitudinal steel reinforcement (hybrid reinforcement) evidencing signs of crack localisation and ductility reduction in comparison to those comparable members with conventional reinforcement. Although there already are relevant scientific publications dealing with this topic, further evidences and results are still required to cover low ranges of reinforcement ratios and SFRC strength classes. To this end, an experimental programme was conducted in order to analyse the flexural response of thirteen simply supported 400 × 1000 × 3000 mm shallow beams made of different SFRC performance classes (1.5a, 2a and 1.5c) and reinforced with longitudinal reinforcement amounts ¿ = 0.15 %. The hybrid-reinforced elements tested showed a reduction of the ductility capacity up to a 50 % in comparison with its conventionally reinforced counterparts. Based on the experimental results, ductility analyses for both material and flexural performance of the members tested were conducted based on the fib Model Code 2020 and Eurocode-2 provisions. The results allow confirming that the minimum amount of reinforcement proposed in the Annex L of the Eucorode-2 for lightly reinforced elements with the inferior SFRC strength classes might be insufficient to provide the ductility levels assumed in design., The authors want to acknowledge the contribution and support of ACCIONA and Ghella through the AGJV Joint Venture. Furthermore, the authors want to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation through the HEAT project (PID2023–149321OB-C32). The first author wants to acknowledge the support provided by the Spanish Ministry of Science and Innovation through the Ayuda Torres Quevedo funding programme (PTQ2024-013739)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chloride-induced corrosion effects on the structural performance of concrete with rebar and fibres: a review

  • Bajic, Petar
  • Leporace Guimil, Bruno
  • Andrade, Carmen
  • Tošić, Nikola
  • Fuente Antequera, Albert de la
Chloride-induced corrosion is a major contributor in the degradation of standardised steel-based products (e.g., rebars and fibres) commonly used for reinforcing concrete structures. Since cracked reinforced concrete elements are determined to be more susceptible to corrosion on the one hand, and fibres are effective in arresting crack growth and improving the post-cracking mechanical behaviour on the other hand, the use of fibres emerges as a promising strategy to enhance durability. This review is focused on the degradation of the load-bearing capacity, caused by chloride corrosion, in concrete elements reinforced with fibres and conventional rebar. Based on the recorded values of ultimate loads and the corresponding deflections in the reviewed studies, a lower decrease in the load-bearing capacity and less severe degradation of ductility were observed in elements where fibres (either steel or macro-synthetic) were used in combination with rebar compared with elements where only rebar was used. Furthermore, the recorded values of corrosion potential (Ecorr), corrosion current density (icorr) and gravimetric measurements indicated lower corrosion damage, delayed corrosion initiation and a prolonged propagation phase of corrosion. However, due to many differences in the methodology among the reviewed studies, the optimal fibre type or quantity cannot be identified unless more studies are performed., This research was supported by the Master Builders Solutions GmbH, Germany, the Ministry of Science and Investigation (Ministerio de Ciencia, Innovación y Universidades) the State Research Agency (Agencia Estatal de Investigación) of the Kingdom of Spain. Project reference: PID2019-108978RB-C32; grant reference: PRE2020-095457. Support was provided by project Hormigones Reforzados con Macrofibras Sintéticas para Aplicaciones Estructurales en condiciones de altas temperaturas (HEAT), project reference: PID2023-149321OB-C32., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Resistance partial factor calibration for SFRC elements without shear reinforcement subjected to punching shear according to EN 1992-1-1:2023

  • Monserrat López, Andrea
  • Bairán García, Jesús Miguel
  • Fuente Antequera, Albert de la
  • Fernández Ruíz, Miguel
Punching shear failure is often the governing design criterion of flat slabs at Ultimate Limit State and may potentially lead to progressive collapses. The latest version of Eurocode 2 (EN 1992–1–1:2023) introduces a new punching shear design model for fibre reinforced concrete (FRC) slabs in its Annex L. According to this approach, the concrete and shear reinforcement contributions are estimated based on the Critical Shear Crack Theory and the beneficial influence of the fibres is considered by means of the residual tensile strength of FRC. The model of EN 1992–1–1:2023 moves towards more rational approaches based on physical models. However, it appears that the reliability and applicability of the new formulation require further validation and calibration, particularly regarding the fibre contribution to the shear resistance. This paper is addressed at this topic, in an effort to provide a consistent safety format and calibrated values of the partial factors for the punching shear resistance of FRC. To that aim, an extensive literature review was conducted compiling a comprehensive database of steel fibre reinforced concrete (SFRC) slab-column connections without shear reinforcement. A total of 261 tests from 29 studies were collected. This database was subsequently filtered, considering only specimens with usual amounts of fibres and dimensions in construction, resulting into 67 representative tests. This database was later used to perform a probabilistic reliability-based calibration of the resistance partial factor associated with the fibre contribution ¿V,FRC consistent with the FORM principles. The calibration considered different levels of scatter in the residual tensile strength of FRC, along with the target reliability index prescribed in the Eurocodes. The results show that a value of the resistance partial factor for the fibre contribution ¿V,FRC equal to 1.30 may be adopted for expected scatters in the residual tensile strength of FRC up to 20 %, covering a wide range of practical applications. For higher levels of scatter, up to 30 % as a reasonable estimate of the maximum acceptable scatter in typical applications, a value ¿V,FRC = 1.40 is suggested. For other cases, with even higher scatter or outside the range of parameters analysed, a detailed reliability analysis might be required, This study was financially supported by the Agencia Estatal de Investigaci´on (AEI), Ministerio de Ciencia, Innovación y Universidades (Gobierno de España), under the project HEAT (PID2023–149321OBC32), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Limestone calcined clay cementitious (LC3) paving flags with textile waste fibers and fine recycled aggregates: mechanical, durability and multi-criteria sustainability analysis

  • Sadrolodabaee, Payam
  • Fuente Antequera, Albert de la
  • Ardanuy Raso, Mònica
  • Claramunt Blanes, Josep
The demand for a sustainable built environment is steering construction materials research towards finding effective methods to reduce carbon emissions in concrete production. In this context, this study explores a triple-strategy approach oriented to increase the decarbonization potential of cementitious flags: (1) limiting Portland cement to 51¿% by incorporating limestone-calcined clay; (2) reinforcing the matrix with nonwoven textile waste fabrics; and (3) replacing natural aggregates with fine recycled aggregates from construction waste. Mechanical (flexural and uniaxial tensile strengths), weathering resistance (accelerated wet-dry cycles, freeze-thaw cycles, and water absorption), and serviceability parameters (thermal/acoustic insulations, abrasion, and post-fire residual resistance) of composite paving flags were characterized in laboratory conditions. Further, microstructural analysis and digital image correlation technique were implemented. The 30 mm-thick composite intended for paving flag reached the maximum flexural and tensile strengths of 8.9 and 2.1¿MPa, respectively. Deflection- and strain-hardening behavior was observed due to the synergistic interactions between the matrix and fiber. Despite relatively high water absorption =10¿%), the composite could satisfy the minimum requirements per standard for freeze-thaw and abrasion resistance. Finally, a sustainability performance analysis using a multi-criteria decision-making method—considering both environmental and socio-technical aspects—confirmed the composite’s viability from technical and sustainability standpoints, achieving satisfaction values of =¿0.7 on a 1.0 scale., The authors express their gratitude to the Government of Spain, Ministerio de Ciencia, Innovación y Universidades (MICIU), Agencia Estatal de Investigación (AEI) and by the European Regional Development Fund (ERDF) for the financial support received under the scope of the WASTE2BUILD project (Grant PID2024-156605OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU) and HEAT project (PID2023-149321OB-C32). The first author also extends his gratitude to UK Research and Innovation (UKRI)—Innovate UK for funding under the Knowledge Transfer Partnerships (KTP No. 13622) program. The authors gratefully acknowledge Professor Ana Maria Lacasta for her collaboration in assessing the acoustic properties., Peer Reviewed, 12.2 - Per a 2030, assolir la gestió sostenible i l’ús eficient dels recursos naturals, 12 - Producció i Consum Responsables, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental validation of the short- and long-term structural performance of macro-synthetic fibre reinforced concrete beams with minimum longitudinal reinforcement

  • Tošić, Nikola
  • Bajic, Petar
  • Liu, Guanzhi
  • Nogales, Alejandro
  • Fuente Antequera, Albert de la
Fibre reinforced concrete has become a recognized and accepted material for structural applications. This has been recognized by its acceptance into international design codes, such as the fib Model Code 2010 and 2020. Nonetheless, certain national standards, such as the Eurocode 2, adopted by CEN member states, so far only consider the use of steel fibres. However, macro-synthetic fibre reinforced concrete (MSFRC) is being increasingly used, warranting its inclusion in such standards. This works aims at supporting the initiative of CEN/TC 250/SC 2/WG 3 for producing a CEN Technical Specification for MSFRC. For this purpose, a three-year experimental campaign was carried out to characterize the mechanical properties of MSFRC with different fibre types and amounts, to test short- and long-term structural behaviour of steel rebar macro-synthetic fibre reinforced concrete (SRMSFRC) cracked elements and to conduct constitutive modelling and analysis of the results. The results reveal a significant contribution of fibres to the flexural strength of full-scale beams at both 3 and 9¿kg/m3 polypropylene fibre contents. In terms of sustained load tests, the overall deflection behaviour, analysed on a normalised level (total deflection/initial deflection) evolves similarly between SRMSFRC and reinforced concrete (RC) beams. Finally, the analytical predictions of SRMSFRC deflections demonstrate good agreement with experimental results, without the need to include any time-dependent properties of MSFRC. The experimental evidences reported in this study confirm that macro-synthetic fibres effectively enhance the flexural tensile capacity of SRMSFRC elements with minimum conventional steel reinforcement, both at short- and long-term, under sustained loading conditions., This study is part of the project HEAT, under grant PID2023–149321OB-C32, funded by MCIN/AEI/10.13039/501100011033. The study also received funding from Master Builders Solutions. This support is gratefully acknowledged. Any opinions, findings, conclusions, and/or recommendations in the paper are those of the authors and do not necessarily represent the views of the individuals or organizations acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flexural fatigue performance of pre-cracked steel fibre reinforced concrete: experimental program and design-oriented approach

  • Martinello Carlesso, Debora
  • Pialarissi Cavalaro, Sergio Henrique
  • Bairán García, Jesús Miguel
  • Fuente Antequera, Albert de la
This paper analyses the mechanical behaviour of steel fibre reinforced concrete (SFRC) subjected to cyclic loading. Fatigue tests were conducted on pre-cracked specimens using a three-point bending setup, considering initial crack widths and load levels representative of the service limit state (SLS). A Weibull distribution was used to establish the S-N-Pf curve. The crack growth rate indicated that inflection points are governed by the quasi-static load-CMOD relationship, transitioning to a damage accelerate stage with reduced post-cracking strength. Energy dissipation analysis revealed a significant increase of this property at lower load levels during the final 80¿% of fatigue life, while increases were less pronounced at higher load levels. Maximum energy dissipation occurred at the CMOD corresponding to a 2¿% reduction in load-bearing capacity. Visual analysis of SFRC cross-sections suggested that fatigue failure resulted from a combination of persistent fibre pull-out, fibre-matrix damage, and fibre rupture. An improved conceptual model accurately estimates CMOD evolution and suggests that fatigue tests can be shortened by pre-cracking or performing a set number of cycles to stabilize deformation rates. Fatigue life design considerations herein are proposed to the light of results and analysis carried out., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The influence of nodal region detailing on the quasi-static and dynamic response of frame corners

  • Monserrat López, Andrea
  • Viula Faria, Duarte M.
  • Brantschen, Fabio
  • Nogales Arroyo, Alejandro
  • Fernández Ruíz, Miguel
Nodal regions are present in a large number of reinforced concrete structures, such as cut-and-cover tunnels, retaining walls, roofs or silos. For such discontinuity regions, the arrangement and detailing of the reinforcement largely determines their performance. In this regard, the analysis of the quasi-static response of nodal regions has typically focused on the resistance of the region, but limited works have been dedicated to the analysis of the post-peak response and the capacity to dissipate energy of such details. In this paper, an extensive database (126 test results) of nodal regions of reinforced concrete frames collected by the authors is presented and analysed. Considering these results, an analytical model for design of such regions under quasi-static loading conditions is introduced as well as its implications on the structural response. Finally, such approach is extended including considerations on the response and governing load-carrying actions in case of large deformations., This study was financially supported by the Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades (Gobierno de España), under the project HEAT (PID2023-149321OB-C32)., Peer Reviewed, Postprint (author's final draft)